Mailing-List: contact commits-help@camel.apache.org; run by ezmlm
Precedence: bulk
Reply-To: dev@camel.apache.org
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: ningjiang@apache.org
To: commits@camel.apache.org
Date: Fri, 12 Sep 2014 15:40:29 -0000
Message-Id: <e1e442c7ac7e478f96993fece7bad54c@git.apache.org>
In-Reply-To: <f2425f3c6cd243e6b980929ff3bd4797@git.apache.org>
References: <f2425f3c6cd243e6b980929ff3bd4797@git.apache.org>
Subject: [11/13] CAMEL-7220 using the lasted schematron files from google code
 and added ASF license header to files

http://git-wip-us.apache.org/repos/asf/camel/blob/e5973850/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl
----------------------------------------------------------------------
diff --git a/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl b/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl
index d58f191..ded219d 100644
--- a/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl
+++ b/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl
@@ -1,12 +1,27 @@
-<?xml version="1.0" encoding="UTF-8"?><?xar XSLT?>
-
+<?xml version="1.0" encoding="UTF-8"?><?xar XSLT?>
+<!--
+  Licensed to the Apache Software Foundation (ASF) under one or more
+  contributor license agreements.  See the NOTICE file distributed with
+  this work for additional information regarding copyright ownership.
+  The ASF licenses this file to You under the Apache License, Version 2.0
+  (the "License"); you may not use this file except in compliance with
+  the License.  You may obtain a copy of the License at
+
+  http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+-->
 <!-- 
      OVERVIEW : iso_dsdl_include.xsl
      
 	    This is an inclusion preprocessor for the non-smart text inclusions
 	    of ISO DSDL. It handles 
 	    	<relax:extRef> for ISO RELAX NG
-	    	<sch:include>  for ISO Schematron and Schematron 1.n
+	    	<sch:include>  for ISO Schematron and Schematron 1.n
 	    	<sch:extends>  for 2009 draft ISO Schematron
 	    	<xi:xinclude>  simple W3C XIncludes for ISO NVRL and DSRL 
 	    	<crdl:ref>     for draft ISO CRDL
@@ -22,266 +37,276 @@
 		    * @xml:id
 		    * id() for typed schemas (e.g. from DTD) [NOTE: XInclude does not support this]
 		    * untyped @id 
-		    
-	The proposed behaviour for the update to ISO Schematron has been implemented. If an
-	include points to an element with the same name as the parent, then that element's
-	contents will be included. This supports the merge style of inclusion.    
-	
-	When an inclusion is made, it is preceded by a PI with target DSDL_INCLUDE_START
-	and the href and closed by a PI with target DSDL_INCLUDE_START and the href. This is
-	to allow better location of problems, though only to the file level. 
-	
-	Limitations:
-	* No rebasing: relative paths will be interpreted based on the initial document's
-	path, not the including document. (Severe limitation!)
-	* No checking for circular references
-	* Not full xpointers: only ID matching
-	* <relax:include> not implemented 
-	* XInclude handling of xml:base and xml:lang not implemented   
--->
+		    
+	The proposed behaviour for the update to ISO Schematron has been implemented. If an
+	include points to an element with the same name as the parent, then that element's
+	contents will be included. This supports the merge style of inclusion.    
+	
+	When an inclusion is made, it is preceded by a PI with target DSDL_INCLUDE_START
+	and the href and closed by a PI with target DSDL_INCLUDE_START and the href. This is
+	to allow better location of problems, though only to the file level. 
+	
+	Limitations:
+	* No rebasing: relative paths will be interpreted based on the initial document's
+	path, not the including document. (Severe limitation!)
+	* No checking for circular references
+	* Not full xpointers: only ID matching
+	* <relax:include> not implemented 
+	* XInclude handling of xml:base and xml:lang not implemented   
+-->
+<!--
+Open Source Initiative OSI - The MIT License:Licensing
+[OSI Approved License]
+
+This source code was previously available under the zlib/libpng license. 
+Attribution is polite.
+
+The MIT License
+
+Copyright (c) 2008-2010 Rick Jelliffe
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+-->
+
 <!-- 
-  VERSION INFORMATION
-    2010-04-21
-    * Add basic syntax checks on XPaths belonging to Schematron elements only
-    * Unlocalized messages are put out using xsl:message. The intent is to allow
-    * problems to be caught at compile time. 
-	2009-02-25 
-	* Update DSDL namespace to use schematron.com
-	* Tested with SAXON9, Xalan 2.7.1, IE7, 
-	* IE does not like multiple variables in same template with same name: rename.   
-	2008-09-18
-	* Remove new behaviour for include, because it conflicts with existing usage [KH]
-	* Add extends[@href] element with that merge functionality
-	* Generate PIs to notate source of inclusions for potential better diagnostics
-	
-	2008-09-16
-	* Fix for XSLT1
-	
-	2008-08-28
-	* New behaviour for schematron includes: if the pointed to element is the same as the current,
-	include the children.
-	
-	2008-08-20
-	* Fix bug: in XSLT1 cannot do $document/id('x') but need to use for-each
-	
-	2008-08-04
-	* Add support for inclusions in old namespace  
-	
-	2008-08-03
-	* Fix wrong param name include-relaxng & include-crdl (KH, PH)
-	* Allow inclusion of XSLT and XHTML (KH)
-	* Fix inclusion of fragments (KH)
-	
-	2008-07-25
-	* Add selectable input parameter
-	
-	2008-07-24  
-	* RJ New
--->
-<!--
-	LEGAL INFORMATION
-	
-	Copyright (c) 2008 Rick Jelliffe 
-	
-	This software is provided 'as-is', without any express or implied warranty. 
-	In no event will the authors be held liable for any damages arising from 
-	the use of this software.
-	
-	Permission is granted to anyone to use this software for any purpose, 
-	including commercial applications, and to alter it and redistribute it freely,
-	subject to the following restrictions:
-	
-	1. The origin of this software must not be misrepresented; you must not claim
-	that you wrote the original software. If you use this software in a product, 
-	an acknowledgment in the product documentation would be appreciated but is 
-	not required.
-	
-	2. Altered source versions must be plainly marked as such, and must not be 
-	misrepresented as being the original software.
-	
-	3. This notice may not be removed or altered from any source distribution.
--->
-<xslt:stylesheet version="1.0"
-	xmlns:xslt="http://www.w3.org/1999/XSL/Transform"
-	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-	xmlns:iso="http://purl.oclc.org/dsdl/schematron"
-	xmlns:nvdl="http://purl.oclc.org/dsdl/nvdl"
-	xmlns:xhtml="http://www.w3.org/1999/xhtml"
-	xmlns:schold="http://www.ascc.net/xml/schematron"
-	xmlns:crdl="http://purl.oclc.org/dsdl/crepdl/ns/structure/1.0"
-	xmlns:xi="http://www.w3.org/2001/XInclude"
-	xmlns:dtll="http://www.jenitennison.com/datatypes"
-	xmlns:dsdl="http://www.schematron.com/namespace/dsdl"
-	xmlns:relax="http://relaxng.org/ns/structure/1.0"
-	xmlns:xlink="http://www.w3.org/1999/xlink"
-	
-	
-     xmlns:sch-check="http://www.schematron.com/namespace/sch-check" 
-	>
-	<!-- Note: The URL for the dsdl namespace is not official -->
-
-
-	<xsl:param name="include-schematron">true</xsl:param>
-	<xsl:param name="include-crdl">true</xsl:param>
-	<xsl:param name="include-xinclude">true</xsl:param>
-	<xsl:param name="include-dtll">true</xsl:param>
-	<xsl:param name="include-relaxng">true</xsl:param>
-	<xsl:param name="include-xlink">true</xsl:param>
-
-   
-    <!-- ========================================================== -->
-    <!-- Output and process contents, check Schematron XPaths too   -->
-    <!-- ========================================================== -->
-    
-	<xsl:template match="/">
-		<xsl:apply-templates select="." mode="dsdl:go" />
-	</xsl:template>
-
-	<!-- output everything else unchanged. But check Xpaths here.  -->
-
-	<xslt:template match="iso:rule[@context]"  mode="dsdl:go">
-	  <xsl:call-template name="sch-check:xpath-wf-message">
-          <xsl:with-param name="string" select=" @context "  />
-          <xsl:with-param name="subject" select=" 'Bad rule: ' "  />
-        </xsl:call-template>
-        
-		<xslt:copy>
-			<xslt:copy-of select="@*" />
-			<xslt:apply-templates mode="dsdl:go" />
-		</xslt:copy>
-	</xslt:template>
-	
-	<xslt:template match="iso:assert[@test]"  mode="dsdl:go">
-	  <xsl:call-template name="sch-check:xpath-wf-message">
-          <xsl:with-param name="string" select=" @test "  />
-          <xsl:with-param name="subject" select=" 'Bad assert: ' "  />
-        </xsl:call-template>
-        
-		<xslt:copy>
-			<xslt:copy-of select="@*" />
-			<xslt:apply-templates mode="dsdl:go" />
-		</xslt:copy>
-	</xslt:template>
-	
-	<xslt:template match="iso:report[@test]"  mode="dsdl:go">
-	  <xsl:call-template name="sch-check:xpath-wf-message">
-          <xsl:with-param name="string" select=" @test "  />
-          <xsl:with-param name="subject" select=" 'Bad report: ' "  />
-        </xsl:call-template>
-        
-		<xslt:copy>
-			<xslt:copy-of select="@*" />
-			<xslt:apply-templates mode="dsdl:go" />
-		</xslt:copy>
-	</xslt:template>
-	
-	<xslt:template match="iso:let[@value]"  mode="dsdl:go">
-	  <xsl:call-template name="sch-check:xpath-wf-message">
-          <xsl:with-param name="string" select=" @value "  />
-          <xsl:with-param name="subject" select=" 'Bad let: ' "  />
-        </xsl:call-template>
-        
-		<xslt:copy>
-			<xslt:copy-of select="@*" />
-			<xslt:apply-templates mode="dsdl:go" />
-		</xslt:copy>
-	</xslt:template>
-	
-	
-		<xslt:template match="iso:value-of[@select]" mode="dsdl:go">
-	  <xsl:call-template name="sch-check:xpath-wf-message">
-          <xsl:with-param name="string" select=" @select "  />
-          <xsl:with-param name="subject" select=" 'Bad value-of: ' "  />
-        </xsl:call-template>
-        
-		<xslt:copy>
-			<xslt:copy-of select="@*" />
-			<xslt:apply-templates mode="dsdl:go" />
-		</xslt:copy>
-	</xslt:template>
-	
-		<xslt:template match="iso:name[@path]" mode="dsdl:go">
-	  <xsl:call-template name="sch-check:xpath-wf-message">
-          <xsl:with-param name="string" select=" @select "  />
-          <xsl:with-param name="subject" select=" 'Bad name element: ' "  />
-        </xsl:call-template>
-        
-		<xslt:copy>
-			<xslt:copy-of select="@*" />
-			<xslt:apply-templates mode="dsdl:go" />
-		</xslt:copy>
-	</xslt:template>
-
-		<!-- output everything else unchanged -->
-	<xslt:template match="node()" priority="-1" mode="dsdl:go">
-		<xslt:copy>
-			<xslt:copy-of select="@*" />
-			<xslt:apply-templates mode="dsdl:go" />
-		</xslt:copy>
-	</xslt:template>
-
-
-
-	<!-- =========================================================== -->
-	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
-	<!-- Part 2 - Regular grammar-based validation - RELAX NG        -->
-	<!-- This only implements relax:extRef not relax:include which   -->
-	<!-- is complex.                                                 -->
-	<!-- =========================================================== -->
-	<xslt:template match="relax:extRef" mode="dsdl:go">
-
-
-		<!-- Insert subschema -->
-
-		<xsl:variable name="document-uri"
-			select="substring-before(concat(@href,'#'), '#')" />
-		<xsl:variable name="fragment-id"
-			select="substring-after(@href, '#')" />
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_START">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-		<xsl:choose>
-			<xsl:when test="not( $include-relaxng = 'true' )">
-				<xslt:copy>
-					<xslt:copy-of select="@*" />
-					<xslt:apply-templates mode="dsdl:go" />
-				</xslt:copy>
-			</xsl:when>
-			<xsl:otherwise>
-
-				<xsl:choose>
-
-					<xsl:when
-						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
-						<xsl:message>
-							Error: Impossible URL in RELAX NG extRef
-							include
-						</xsl:message>
-					</xsl:when>
-
-					<!-- this case is when there is in embedded schema in the same document elsewhere -->
-					<xslt:when
-						test="string-length( $document-uri ) = 0">
-						<xslt:apply-templates mode="dsdl:go"
-							select="//*[@xml:id= $fragment-id ] | id( $fragment-id) | //*[@id= $fragment-id ]" />
-					</xslt:when>
-
-					<xsl:when
-						test="string-length( $fragment-id ) &gt; 0">
-						<xsl:variable name="theDocument_1"
-							select="document( $document-uri,/ )" />
-
-						<xsl:if test="not($theDocument_1)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<!-- use a for-each so that the id() function works correctly on the external document -->
-						<xsl:for-each select="$theDocument_1">
-							<xsl:variable name="theFragment_1"
-								select="$theDocument_1//*[@xml:id= $fragment-id ]        
+  VERSION INFORMATION
+    2010-07-10
+    * Move to MIT license
+    2010-04-21
+    * Add basic syntax checks on XPaths belonging to Schematron elements only
+    * Unlocalized messages are put out using xsl:message. The intent is to allow
+    * problems to be caught at compile time. 
+	2009-02-25 
+	* Update DSDL namespace to use schematron.com
+	* Tested with SAXON9, Xalan 2.7.1, IE7, 
+	* IE does not like multiple variables in same template with same name: rename.   
+	2008-09-18
+	* Remove new behaviour for include, because it conflicts with existing usage [KH]
+	* Add extends[@href] element with that merge functionality
+	* Generate PIs to notate source of inclusions for potential better diagnostics
+	
+	2008-09-16
+	* Fix for XSLT1
+	
+	2008-08-28
+	* New behaviour for schematron includes: if the pointed to element is the same as the current,
+	include the children. [Note: this has been removed: use sch:extends with @href.]
+	
+	2008-08-20
+	* Fix bug: in XSLT1 cannot do $document/id('x') but need to use for-each
+	
+	2008-08-04
+	* Add support for inclusions in old namespace  
+	
+	2008-08-03
+	* Fix wrong param name include-relaxng & include-crdl (KH, PH)
+	* Allow inclusion of XSLT and XHTML (KH)
+	* Fix inclusion of fragments (KH)
+	
+	2008-07-25
+	* Add selectable input parameter
+	
+	2008-07-24  
+	* RJ New
+-->
+
+<xslt:stylesheet version="1.0"
+	xmlns:xslt="http://www.w3.org/1999/XSL/Transform"
+	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+	xmlns:iso="http://purl.oclc.org/dsdl/schematron"
+	xmlns:nvdl="http://purl.oclc.org/dsdl/nvdl"
+	xmlns:xhtml="http://www.w3.org/1999/xhtml"
+	xmlns:schold="http://www.ascc.net/xml/schematron"
+	xmlns:crdl="http://purl.oclc.org/dsdl/crepdl/ns/structure/1.0"
+	xmlns:xi="http://www.w3.org/2001/XInclude"
+	xmlns:dtll="http://www.jenitennison.com/datatypes"
+	xmlns:dsdl="http://www.schematron.com/namespace/dsdl"
+	xmlns:relax="http://relaxng.org/ns/structure/1.0"
+	xmlns:xlink="http://www.w3.org/1999/xlink"
+	
+	
+     xmlns:sch-check="http://www.schematron.com/namespace/sch-check" 
+	>
+	<!-- Note: The URL for the dsdl namespace is not official -->
+
+
+	<xsl:param name="include-schematron">true</xsl:param>
+	<xsl:param name="include-crdl">true</xsl:param>
+	<xsl:param name="include-xinclude">true</xsl:param>
+	<xsl:param name="include-dtll">true</xsl:param>
+	<xsl:param name="include-relaxng">true</xsl:param>
+	<xsl:param name="include-xlink">true</xsl:param>
+
+   
+    <!-- ========================================================== -->
+    <!-- Output and process contents, check Schematron XPaths too   -->
+    <!-- ========================================================== -->
+    
+	<xsl:template match="/">
+		<xsl:apply-templates select="." mode="dsdl:go" />
+	</xsl:template>
+
+	<!-- output everything else unchanged. But check Xpaths here.  -->
+
+	<xslt:template match="iso:rule[@context]"  mode="dsdl:go">
+	  <xsl:call-template name="sch-check:xpath-wf-message">
+          <xsl:with-param name="string" select=" @context "  />
+          <xsl:with-param name="subject" select=" 'Bad rule: ' "  />
+        </xsl:call-template>
+        
+		<xslt:copy>
+			<xslt:copy-of select="@*" />
+			<xslt:apply-templates mode="dsdl:go" />
+		</xslt:copy>
+	</xslt:template>
+	
+	<xslt:template match="iso:assert[@test]"  mode="dsdl:go">
+	  <xsl:call-template name="sch-check:xpath-wf-message">
+          <xsl:with-param name="string" select=" @test "  />
+          <xsl:with-param name="subject" select=" 'Bad assert: ' "  />
+        </xsl:call-template>
+        
+		<xslt:copy>
+			<xslt:copy-of select="@*" />
+			<xslt:apply-templates mode="dsdl:go" />
+		</xslt:copy>
+	</xslt:template>
+	
+	<xslt:template match="iso:report[@test]"  mode="dsdl:go">
+	  <xsl:call-template name="sch-check:xpath-wf-message">
+          <xsl:with-param name="string" select=" @test "  />
+          <xsl:with-param name="subject" select=" 'Bad report: ' "  />
+        </xsl:call-template>
+        
+		<xslt:copy>
+			<xslt:copy-of select="@*" />
+			<xslt:apply-templates mode="dsdl:go" />
+		</xslt:copy>
+	</xslt:template>
+	
+	<xslt:template match="iso:let[@value]"  mode="dsdl:go">
+	  <xsl:call-template name="sch-check:xpath-wf-message">
+          <xsl:with-param name="string" select=" @value "  />
+          <xsl:with-param name="subject" select=" 'Bad let: ' "  />
+        </xsl:call-template>
+        
+		<xslt:copy>
+			<xslt:copy-of select="@*" />
+			<xslt:apply-templates mode="dsdl:go" />
+		</xslt:copy>
+	</xslt:template>
+	
+	
+		<xslt:template match="iso:value-of[@select]" mode="dsdl:go">
+	  <xsl:call-template name="sch-check:xpath-wf-message">
+          <xsl:with-param name="string" select=" @select "  />
+          <xsl:with-param name="subject" select=" 'Bad value-of: ' "  />
+        </xsl:call-template>
+        
+		<xslt:copy>
+			<xslt:copy-of select="@*" />
+			<xslt:apply-templates mode="dsdl:go" />
+		</xslt:copy>
+	</xslt:template>
+	
+		<xslt:template match="iso:name[@path]" mode="dsdl:go">
+	  <xsl:call-template name="sch-check:xpath-wf-message">
+          <xsl:with-param name="string" select=" @select "  />
+          <xsl:with-param name="subject" select=" 'Bad name element: ' "  />
+        </xsl:call-template>
+        
+		<xslt:copy>
+			<xslt:copy-of select="@*" />
+			<xslt:apply-templates mode="dsdl:go" />
+		</xslt:copy>
+	</xslt:template>
+
+		<!-- output everything else unchanged -->
+	<xslt:template match="node()" priority="-1" mode="dsdl:go">
+		<xslt:copy>
+			<xslt:copy-of select="@*" />
+			<xslt:apply-templates mode="dsdl:go" />
+		</xslt:copy>
+	</xslt:template>
+
+
+
+	<!-- =========================================================== -->
+	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
+	<!-- Part 2 - Regular grammar-based validation - RELAX NG        -->
+	<!-- This only implements relax:extRef not relax:include which   -->
+	<!-- is complex.                                                 -->
+	<!-- =========================================================== -->
+	<xslt:template match="relax:extRef" mode="dsdl:go">
+
+
+		<!-- Insert subschema -->
+
+		<xsl:variable name="document-uri"
+			select="substring-before(concat(@href,'#'), '#')" />
+		<xsl:variable name="fragment-id"
+			select="substring-after(@href, '#')" />
+
+		<xsl:processing-instruction name="DSDL_INCLUDE_START">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+		<xsl:choose>
+			<xsl:when test="not( $include-relaxng = 'true' )">
+				<xslt:copy>
+					<xslt:copy-of select="@*" />
+					<xslt:apply-templates mode="dsdl:go" />
+				</xslt:copy>
+			</xsl:when>
+			<xsl:otherwise>
+
+				<xsl:choose>
+
+					<xsl:when
+						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
+						<xsl:message>
+							Error: Impossible URL in RELAX NG extRef
+							include
+						</xsl:message>
+					</xsl:when>
+
+					<!-- this case is when there is in embedded schema in the same document elsewhere -->
+					<xslt:when
+						test="string-length( $document-uri ) = 0">
+						<xslt:apply-templates mode="dsdl:go"
+							select="//*[@xml:id= $fragment-id ] | id( $fragment-id) | //*[@id= $fragment-id ]" />
+					</xslt:when>
+
+					<xsl:when
+						test="string-length( $fragment-id ) &gt; 0">
+						<xsl:variable name="theDocument_1"
+							select="document( $document-uri,/ )" />
+
+						<xsl:if test="not($theDocument_1)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<!-- use a for-each so that the id() function works correctly on the external document -->
+						<xsl:for-each select="$theDocument_1">
+							<xsl:variable name="theFragment_1"
+								select="$theDocument_1//*[@xml:id= $fragment-id ]        
                   |  id( $fragment-id)          
               | $theDocument_1//*[@id= $fragment-id ]" />
 							<xsl:if test="not($theFragment_1)">
@@ -290,120 +315,120 @@
 									<xsl:value-of select="@href" />
 								</xsl:message>
 							</xsl:if>
-							<xsl:apply-templates
-								select=" $theFragment_1[1]" mode="dsdl:go" />
-						</xsl:for-each>
-					</xsl:when>
-
-					<xsl:otherwise>
-						<xsl:variable name="theDocument_2"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="theFragment_2"
-							select="$theDocument_2/*" />
-						<xsl:if test="not($theDocument_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-
-						<xsl:if test="not($theFragment_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to locate id attribute: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<xsl:apply-templates select="$theFragment_2 "
-							mode="dsdl:go" />
-					</xsl:otherwise>
-				</xsl:choose>
-
-			</xsl:otherwise>
-		</xsl:choose>
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_END">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-	</xslt:template>
-
-
-
-	<!-- =========================================================== -->
-	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
-	<!-- Part 3 - Rule-based validation - Schematron                 -->
-	<!-- =========================================================== -->
-
-
-	<!-- Extend the URI syntax to allow # references -->
-	<!-- Add experimental support for simple containers like  /xxx:xxx/iso:pattern to allow better includes -->
-	<xsl:template match="iso:include" mode="dsdl:go">
-
-		<xsl:variable name="document-uri"
-			select="substring-before(concat(@href,'#'), '#')" />
-		<xsl:variable name="fragment-id"
-			select="substring-after(@href, '#')" />
-
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_START">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-
-		<xsl:choose>
-			<xsl:when test="not( $include-schematron = 'true' )">
-				<xslt:copy>
-					<xslt:copy-of select="@*" />
-					<xslt:apply-templates mode="dsdl:go" />
-				</xslt:copy>
-			</xsl:when>
-			<xsl:otherwise>
-
-				<xsl:choose>
-
-					<xsl:when
-						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
-						<xsl:message>
-							Error: Impossible URL in Schematron include
-						</xsl:message>
-					</xsl:when>
-
-					<!-- this case is when there is in embedded schema in the same document elsewhere -->
-					<xslt:when
-						test="string-length( $document-uri ) = 0">
-						<xslt:apply-templates mode="dsdl:go"
+							<xsl:apply-templates
+								select=" $theFragment_1[1]" mode="dsdl:go" />
+						</xsl:for-each>
+					</xsl:when>
+
+					<xsl:otherwise>
+						<xsl:variable name="theDocument_2"
+							select="document( $document-uri,/ )" />
+						<xsl:variable name="theFragment_2"
+							select="$theDocument_2/*" />
+						<xsl:if test="not($theDocument_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+
+						<xsl:if test="not($theFragment_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to locate id attribute: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<xsl:apply-templates select="$theFragment_2 "
+							mode="dsdl:go" />
+					</xsl:otherwise>
+				</xsl:choose>
+
+			</xsl:otherwise>
+		</xsl:choose>
+
+		<xsl:processing-instruction name="DSDL_INCLUDE_END">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+	</xslt:template>
+
+
+
+	<!-- =========================================================== -->
+	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
+	<!-- Part 3 - Rule-based validation - Schematron                 -->
+	<!-- =========================================================== -->
+
+
+	<!-- Extend the URI syntax to allow # references -->
+	<!-- Add experimental support for simple containers like  /xxx:xxx/iso:pattern to allow better includes -->
+	<xsl:template match="iso:include" mode="dsdl:go">
+
+		<xsl:variable name="document-uri"
+			select="substring-before(concat(@href,'#'), '#')" />
+		<xsl:variable name="fragment-id"
+			select="substring-after(@href, '#')" />
+
+
+		<xsl:processing-instruction name="DSDL_INCLUDE_START">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+
+		<xsl:choose>
+			<xsl:when test="not( $include-schematron = 'true' )">
+				<xslt:copy>
+					<xslt:copy-of select="@*" />
+					<xslt:apply-templates mode="dsdl:go" />
+				</xslt:copy>
+			</xsl:when>
+			<xsl:otherwise>
+
+				<xsl:choose>
+
+					<xsl:when
+						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
+						<xsl:message>
+							Error: Impossible URL in Schematron include
+						</xsl:message>
+					</xsl:when>
+
+					<!-- this case is when there is in embedded schema in the same document elsewhere -->
+					<xslt:when
+						test="string-length( $document-uri ) = 0">
+						<xslt:apply-templates mode="dsdl:go"
 							select="//iso:*[@xml:id= $fragment-id ] 
               	 |id( $fragment-id)
               	 | //iso:*[@id= $fragment-id ]" />
 					</xslt:when>
 
 					<!-- case where there is a fragment in another document (should be an iso: element) -->
-					<!-- There are three cases for includes with fragment:
-						0) No href file or no matching id - error!
-						1) REMOVED
-						
-						2) The linked-to element is sch:schema however the parent of the include
-						is not a schema. In this case, it is an error. (Actually, it should
-						be an error for other kinds of containment problems, but we won't
-						check for them in this version.)
-						
-						3) Otherwise, include the pointed-to element
-					-->
-
-					<xsl:when
-						test="string-length( $fragment-id ) &gt; 0">
-						<xsl:variable name="theDocument_1"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="originalParent" select=".." />
-
-						<!-- case 0 -->
-						<xsl:if test="not($theDocument_1)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<!-- use for-each to rebase id() to external document -->
-						<xsl:for-each select="$theDocument_1">
-							<xsl:variable name="theFragment_1"
+					<!-- There are three cases for includes with fragment:
+						0) No href file or no matching id - error!
+						1) REMOVED
+						
+						2) The linked-to element is sch:schema however the parent of the include
+						is not a schema. In this case, it is an error. (Actually, it should
+						be an error for other kinds of containment problems, but we won't
+						check for them in this version.)
+						
+						3) Otherwise, include the pointed-to element
+					-->
+
+					<xsl:when
+						test="string-length( $fragment-id ) &gt; 0">
+						<xsl:variable name="theDocument_1"
+							select="document( $document-uri,/ )" />
+						<xsl:variable name="originalParent" select=".." />
+
+						<!-- case 0 -->
+						<xsl:if test="not($theDocument_1)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<!-- use for-each to rebase id() to external document -->
+						<xsl:for-each select="$theDocument_1">
+							<xsl:variable name="theFragment_1"
 								select=" $theDocument_1//iso:*[@xml:id= $fragment-id ] |
               	 		id($fragment-id) |
               			$theDocument_1//iso:*[@id= $fragment-id ]" />
@@ -422,440 +447,440 @@
 								<!-- case 1 REMOVED -->
 
 								<!-- case 2 -->
-								<xsl:when
-									test=" $theFragment_1/self::iso:schema ">
-									<xsl:message>
-										Schema error: Use include to
-										include fragments, not a whole
-										schema
-									</xsl:message>
-								</xsl:when>
-
-								<!-- case 3 -->
-								<xsl:otherwise>
-									<xsl:apply-templates
-										select=" $theFragment_1[1]" mode="dsdl:go" />
-								</xsl:otherwise>
-							</xsl:choose>
-						</xsl:for-each>
-					</xsl:when>
-
-					<!-- Case where there is no ID so we include the whole document -->
-					<!-- Experimental addition: include fragments of children -->
-					<xsl:otherwise>
-						<xsl:variable name="theDocument_2"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="theFragment_2"
-							select="$theDocument_2/iso:*" />
-						<xsl:variable name="theContainedFragments"
-							select="$theDocument_2/*/iso:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" />
-						<xsl:if test="not($theDocument_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-
-						<!-- There are three cases for includes:
-							0) No text specified- error!
-							
-							1) REMOVED
-							
-							2) The linked-to element is sch:schema however the parent of the include
-							is not a schema. In this case, it is an error. (Actually, it should
-							be an error for other kinds of containment problems, but we won't
-							check for them in this version.)
-							
-							3) Otherwise, include the pointed-to element
-						-->
-						<xsl:choose>
-							<!-- case 0 -->
-							<xsl:when
-								test="not($theFragment_2) and not ($theContainedFragments)">
-								<xsl:message terminate="no">
-									<xsl:text>Unable to locate id attribute: </xsl:text>
-									<xsl:value-of select="@href" />
-								</xsl:message>
-							</xsl:when>
-
-							<!-- case 1 removed -->
-
-							<!-- case 2 -->
-							<xsl:when
-								test=" $theFragment_2/self::iso:schema or $theContainedFragments/self::iso:schema">
-								<xsl:message>
-									Schema error: Use include to include
-									fragments, not a whole schema
-								</xsl:message>
-							</xsl:when>
-
-							<!-- If this were XLST 2, we could use  
-								if ($theFragment) then $theFragment else $theContainedFragments
-								here (thanks to KN)
-							-->
-							<!-- case 3 -->
-							<xsl:otherwise>
-								<xsl:apply-templates
-									select="$theFragment_2 " mode="dsdl:go" />
-							</xsl:otherwise>
-						</xsl:choose>
-					</xsl:otherwise>
-				</xsl:choose>
-			</xsl:otherwise>
-		</xsl:choose>
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_END">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-	</xsl:template>
-
-
-	<!-- WARNING   sch:extends[@href] is experimental and non standard  -->
-	<!-- Basically, it adds the children of the selected element, not the element itself.  -->
-	<xsl:template match="iso:extends[@href]" mode="dsdl:go">
-
-		<xsl:variable name="document-uri"
-			select="substring-before(concat(@href,'#'), '#')" />
-		<xsl:variable name="fragment-id"
-			select="substring-after(@href, '#')" />
-
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_START">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-
-		<xsl:choose>
-			<xsl:when test="not( $include-schematron = 'true' )">
-				<xslt:copy>
-					<xslt:copy-of select="@*" />
-					<xslt:apply-templates mode="dsdl:go" />
-				</xslt:copy>
-			</xsl:when>
-			<xsl:otherwise>
-
-				<xsl:choose>
-
-					<xsl:when
-						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
-						<xsl:message>
-							Error: Impossible URL in Schematron include
-						</xsl:message>
-					</xsl:when>
-
-					<!-- this case is when there is in embedded schema in the same document elsewhere -->
-					<xslt:when
-						test="string-length( $document-uri ) = 0">
-						<xslt:apply-templates mode="dsdl:go"
-							select="//iso:*[@xml:id= $fragment-id ]/* 
-              	 |id( $fragment-id)/*
-              	 | //iso:*[@id= $fragment-id ]/*" />
-					</xslt:when>
-
-					<!-- case where there is a fragment in another document (should be an iso: element) -->
-					<!-- There are three cases for includes with fragment:
-						0) No href file or no matching id - error!
-						1) REMOVED
-						
-						2) REMOVED
-						
-						3) Otherwise, include the pointed-to element
-					-->
-
-					<xsl:when
-						test="string-length( $fragment-id ) &gt; 0">
-						<xsl:variable name="theDocument_1"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="originalParent" select=".." />
-
-						<!-- case 0 -->
-						<xsl:if test="not($theDocument_1)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<!-- use for-each to rebase id() to external document -->
-						<xsl:for-each select="$theDocument_1">
-							<xsl:variable name="theFragment_1"
-								select=" $theDocument_1//iso:*[@xml:id= $fragment-id ] |
-              	 		id($fragment-id) |
-              			$theDocument_1//iso:*[@id= $fragment-id ]" />
-
-
-							<xsl:choose>
-								<!-- case 0 -->
-								<xsl:when test="not($theFragment_1)">
-									<xsl:message terminate="no">
-										<xsl:text>Unable to locate id attribute: </xsl:text>
-										<xsl:value-of select="@href" />
-									</xsl:message>
-								</xsl:when>
-
-
-								<!-- case 1 REMOVED -->
-
-								<!-- case 2 REMOVED -->
-
-
-								<!-- case 3 -->
-								<xsl:otherwise>
-
-									<xsl:apply-templates
-										select=" $theFragment_1[1]/*" mode="dsdl:go" />
-								</xsl:otherwise>
-							</xsl:choose>
-						</xsl:for-each>
-					</xsl:when>
-
-					<!-- Case where there is no ID so we include the whole document -->
-					<!-- Experimental addition: include fragments of children -->
-					<xsl:otherwise>
-						<xsl:variable name="theDocument_2"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="theFragment_2"
-							select="$theDocument_2/iso:*" />
-						<xsl:variable name="theContainedFragments"
-							select="$theDocument_2/*/iso:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" />
-						<xsl:if test="not($theDocument_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-
-						<!-- There are three cases for includes:
-							0) No text specified- error!
-							
-							1) REMOVED
-							
-							2) REMOVED
-							
-							3) Otherwise, include the pointed-to element
-						-->
-						<xsl:choose>
-							<!-- case 0 -->
-							<xsl:when
-								test="not($theFragment_2) and not ($theContainedFragments)">
-								<xsl:message terminate="no">
-									<xsl:text>Unable to locate id attribute: </xsl:text>
-									<xsl:value-of select="@href" />
-								</xsl:message>
-							</xsl:when>
-
-							<!-- case 1 removed -->
-
-							<!-- case 2 removed -->
-
-							<!-- If this were XLST 2, we could use  
-								if ($theFragment) then $theFragment else $theContainedFragments
-								here (thanks to KN)
-							-->
-							<!-- case 3 -->
-							<xsl:otherwise>
-								<xsl:apply-templates
-									select="$theFragment_2/* " mode="dsdl:go" />
-							</xsl:otherwise>
-						</xsl:choose>
-					</xsl:otherwise>
-				</xsl:choose>
-			</xsl:otherwise>
-		</xsl:choose>
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_END">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-	</xsl:template>
-
-
-
-	<!-- =========================================================== -->
-	<!-- Handle Schematron 1.6 inclusions: clone of ISO code above   -->
-	<!-- =========================================================== -->
-
-
-	<!-- Extend the URI syntax to allow # references -->
-	<!-- Add experimental support for simple containers like  /xxx:xxx/schold:pattern to allow better includes -->
-	<xsl:template match="schold:include" mode="dsdl:go">
-		<xsl:variable name="document-uri"
-			select="substring-before(concat(@href,'#'), '#')" />
-		<xsl:variable name="fragment-id"
-			select="substring-after(@href, '#')" />
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_START">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-
-		<xsl:choose>
-			<xsl:when test="not( $include-schematron = 'true' )">
-				<xslt:copy>
-					<xslt:copy-of select="@*" />
-					<xslt:apply-templates mode="dsdl:go" />
-				</xslt:copy>
-			</xsl:when>
-			<xsl:otherwise>
-				<xsl:choose>
-
-					<xsl:when
-						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
-						<xsl:message>
-							Error: Impossible URL in Schematron include
-						</xsl:message>
-					</xsl:when>
-
-					<!-- this case is when there is in embedded schema in the same document elsewhere -->
-					<xslt:when
-						test="string-length( $document-uri ) = 0">
-						<xslt:apply-templates mode="dsdl:go"
+								<xsl:when
+									test=" $theFragment_1/self::iso:schema ">
+									<xsl:message>
+										Schema error: Use include to
+										include fragments, not a whole
+										schema
+									</xsl:message>
+								</xsl:when>
+
+								<!-- case 3 -->
+								<xsl:otherwise>
+									<xsl:apply-templates
+										select=" $theFragment_1[1]" mode="dsdl:go" />
+								</xsl:otherwise>
+							</xsl:choose>
+						</xsl:for-each>
+					</xsl:when>
+
+					<!-- Case where there is no ID so we include the whole document -->
+					<!-- Experimental addition: include fragments of children -->
+					<xsl:otherwise>
+						<xsl:variable name="theDocument_2"
+							select="document( $document-uri,/ )" />
+						<xsl:variable name="theFragment_2"
+							select="$theDocument_2/iso:*" />
+						<xsl:variable name="theContainedFragments"
+							select="$theDocument_2/*/iso:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" />
+						<xsl:if test="not($theDocument_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+
+						<!-- There are three cases for includes:
+							0) No text specified- error!
+							
+							1) REMOVED
+							
+							2) The linked-to element is sch:schema however the parent of the include
+							is not a schema. In this case, it is an error. (Actually, it should
+							be an error for other kinds of containment problems, but we won't
+							check for them in this version.)
+							
+							3) Otherwise, include the pointed-to element
+						-->
+						<xsl:choose>
+							<!-- case 0 -->
+							<xsl:when
+								test="not($theFragment_2) and not ($theContainedFragments)">
+								<xsl:message terminate="no">
+									<xsl:text>Unable to locate id attribute: </xsl:text>
+									<xsl:value-of select="@href" />
+								</xsl:message>
+							</xsl:when>
+
+							<!-- case 1 removed -->
+
+							<!-- case 2 -->
+							<xsl:when
+								test=" $theFragment_2/self::iso:schema or $theContainedFragments/self::iso:schema">
+								<xsl:message>
+									Schema error: Use include to include
+									fragments, not a whole schema
+								</xsl:message>
+							</xsl:when>
+
+							<!-- If this were XLST 2, we could use  
+								if ($theFragment) then $theFragment else $theContainedFragments
+								here (thanks to KN)
+							-->
+							<!-- case 3 -->
+							<xsl:otherwise>
+								<xsl:apply-templates
+									select="$theFragment_2 " mode="dsdl:go" />
+							</xsl:otherwise>
+						</xsl:choose>
+					</xsl:otherwise>
+				</xsl:choose>
+			</xsl:otherwise>
+		</xsl:choose>
+
+		<xsl:processing-instruction name="DSDL_INCLUDE_END">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+	</xsl:template>
+
+
+	<!-- WARNING   sch:extends[@href] is experimental and non standard  -->
+	<!-- Basically, it adds the children of the selected element, not the element itself.  -->
+	<xsl:template match="iso:extends[@href]" mode="dsdl:go">
+
+		<xsl:variable name="document-uri"
+			select="substring-before(concat(@href,'#'), '#')" />
+		<xsl:variable name="fragment-id"
+			select="substring-after(@href, '#')" />
+
+
+		<xsl:processing-instruction name="DSDL_INCLUDE_START">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+
+		<xsl:choose>
+			<xsl:when test="not( $include-schematron = 'true' )">
+				<xslt:copy>
+					<xslt:copy-of select="@*" />
+					<xslt:apply-templates mode="dsdl:go" />
+				</xslt:copy>
+			</xsl:when>
+			<xsl:otherwise>
+
+				<xsl:choose>
+
+					<xsl:when
+						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
+						<xsl:message>
+							Error: Impossible URL in Schematron include
+						</xsl:message>
+					</xsl:when>
+
+					<!-- this case is when there is in embedded schema in the same document elsewhere -->
+					<xslt:when
+						test="string-length( $document-uri ) = 0">
+						<xslt:apply-templates mode="dsdl:go"
+							select="//iso:*[@xml:id= $fragment-id ]/* 
+              	 |id( $fragment-id)/*
+              	 | //iso:*[@id= $fragment-id ]/*" />
+					</xslt:when>
+
+					<!-- case where there is a fragment in another document (should be an iso: element) -->
+					<!-- There are three cases for includes with fragment:
+						0) No href file or no matching id - error!
+						1) REMOVED
+						
+						2) REMOVED
+						
+						3) Otherwise, include the pointed-to element
+					-->
+
+					<xsl:when
+						test="string-length( $fragment-id ) &gt; 0">
+						<xsl:variable name="theDocument_1"
+							select="document( $document-uri,/ )" />
+						<xsl:variable name="originalParent" select=".." />
+
+						<!-- case 0 -->
+						<xsl:if test="not($theDocument_1)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<!-- use for-each to rebase id() to external document -->
+						<xsl:for-each select="$theDocument_1">
+							<xsl:variable name="theFragment_1"
+								select=" $theDocument_1//iso:*[@xml:id= $fragment-id ] |
+              	 		id($fragment-id) |
+              			$theDocument_1//iso:*[@id= $fragment-id ]" />
+
+
+							<xsl:choose>
+								<!-- case 0 -->
+								<xsl:when test="not($theFragment_1)">
+									<xsl:message terminate="no">
+										<xsl:text>Unable to locate id attribute: </xsl:text>
+										<xsl:value-of select="@href" />
+									</xsl:message>
+								</xsl:when>
+
+
+								<!-- case 1 REMOVED -->
+
+								<!-- case 2 REMOVED -->
+
+
+								<!-- case 3 -->
+								<xsl:otherwise>
+
+									<xsl:apply-templates
+										select=" $theFragment_1[1]/*" mode="dsdl:go" />
+								</xsl:otherwise>
+							</xsl:choose>
+						</xsl:for-each>
+					</xsl:when>
+
+					<!-- Case where there is no ID so we include the whole document -->
+					<!-- Experimental addition: include fragments of children -->
+					<xsl:otherwise>
+						<xsl:variable name="theDocument_2"
+							select="document( $document-uri,/ )" />
+						<xsl:variable name="theFragment_2"
+							select="$theDocument_2/iso:*" />
+						<xsl:variable name="theContainedFragments"
+							select="$theDocument_2/*/iso:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" />
+						<xsl:if test="not($theDocument_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+
+						<!-- There are three cases for includes:
+							0) No text specified- error!
+							
+							1) REMOVED
+							
+							2) REMOVED
+							
+							3) Otherwise, include the pointed-to element
+						-->
+						<xsl:choose>
+							<!-- case 0 -->
+							<xsl:when
+								test="not($theFragment_2) and not ($theContainedFragments)">
+								<xsl:message terminate="no">
+									<xsl:text>Unable to locate id attribute: </xsl:text>
+									<xsl:value-of select="@href" />
+								</xsl:message>
+							</xsl:when>
+
+							<!-- case 1 removed -->
+
+							<!-- case 2 removed -->
+
+							<!-- If this were XLST 2, we could use  
+								if ($theFragment) then $theFragment else $theContainedFragments
+								here (thanks to KN)
+							-->
+							<!-- case 3 -->
+							<xsl:otherwise>
+								<xsl:apply-templates
+									select="$theFragment_2/* " mode="dsdl:go" />
+							</xsl:otherwise>
+						</xsl:choose>
+					</xsl:otherwise>
+				</xsl:choose>
+			</xsl:otherwise>
+		</xsl:choose>
+
+		<xsl:processing-instruction name="DSDL_INCLUDE_END">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+	</xsl:template>
+
+
+
+	<!-- =========================================================== -->
+	<!-- Handle Schematron 1.6 inclusions: clone of ISO code above   -->
+	<!-- =========================================================== -->
+
+
+	<!-- Extend the URI syntax to allow # references -->
+	<!-- Add experimental support for simple containers like  /xxx:xxx/schold:pattern to allow better includes -->
+	<xsl:template match="schold:include" mode="dsdl:go">
+		<xsl:variable name="document-uri"
+			select="substring-before(concat(@href,'#'), '#')" />
+		<xsl:variable name="fragment-id"
+			select="substring-after(@href, '#')" />
+
+		<xsl:processing-instruction name="DSDL_INCLUDE_START">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+
+		<xsl:choose>
+			<xsl:when test="not( $include-schematron = 'true' )">
+				<xslt:copy>
+					<xslt:copy-of select="@*" />
+					<xslt:apply-templates mode="dsdl:go" />
+				</xslt:copy>
+			</xsl:when>
+			<xsl:otherwise>
+				<xsl:choose>
+
+					<xsl:when
+						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
+						<xsl:message>
+							Error: Impossible URL in Schematron include
+						</xsl:message>
+					</xsl:when>
+
+					<!-- this case is when there is in embedded schema in the same document elsewhere -->
+					<xslt:when
+						test="string-length( $document-uri ) = 0">
+						<xslt:apply-templates mode="dsdl:go"
 							select="//schold:*[@xml:id= $fragment-id ] 
               	 |id( $fragment-id)
               	 | //schold:*[@id= $fragment-id ]" />
 					</xslt:when>
 
 					<!-- case where there is a fragment in another document (should be an iso: element) -->
-					<xsl:when
-						test="string-length( $fragment-id ) &gt; 0">
-						<xsl:variable name="theDocument_1"
-							select="document( $document-uri,/ )" />
-						<xsl:if test="not($theDocument_1)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<!-- use for-each to rebase id() to $theDocument -->
-						<xsl:for-each select="$theDocument_1">
-							<xsl:variable name="theFragment_1"
+					<xsl:when
+						test="string-length( $fragment-id ) &gt; 0">
+						<xsl:variable name="theDocument_1"
+							select="document( $document-uri,/ )" />
+						<xsl:if test="not($theDocument_1)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<!-- use for-each to rebase id() to $theDocument -->
+						<xsl:for-each select="$theDocument_1">
+							<xsl:variable name="theFragment_1"
 								select=" $theDocument_1//schold:*[@xml:id= $fragment-id ] |
               	id($fragment-id) |
               	$theDocument_1//schold:*[@id= $fragment-id ]" />
-							<xsl:if
-								test=" $theFragment_1/self::schold:schema ">
-								<xsl:message>
-									Schema error: Use include to include
-									fragments, not a whole schema
-								</xsl:message>
-							</xsl:if>
-							<xsl:if test="not($theFragment_1)">
-								<xsl:message terminate="no">
-									<xsl:text>Unable to locate id attribute: </xsl:text>
-									<xsl:value-of select="@href" />
-								</xsl:message>
-							</xsl:if>
-							<xsl:apply-templates
-								select=" $theFragment_1[1]" mode="dsdl:go" />
-						</xsl:for-each>
-					</xsl:when>
-
-					<!-- Case where there is no ID so we include the whole document -->
-					<!-- Experimental addition: include fragments of children -->
-					<xsl:otherwise>
-						<xsl:variable name="theDocument_2"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="theFragment_2"
-							select="$theDocument_2/iso:*" />
-						<xsl:variable name="theContainedFragments"
-							select="$theDocument_2/*/schold:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" />
-						<xsl:if test="not($theDocument_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-
-						<xsl:if
-							test=" $theFragment_2/self::schold:schema or $theContainedFragments/self::schold:schema">
-							<xsl:message>
-								Schema error: Use include to include
-								fragments, not a whole schema
-							</xsl:message>
-						</xsl:if>
-						<xsl:if
-							test="not($theFragment_2) and not ($theContainedFragments)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to locate id attribute: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<!-- If this were XLST 2, we could use  
-							if ($theFragment) then $theFragment else $theContainedFragments
-							here (thanks to KN)
-						-->
-						<xsl:choose>
-							<xsl:when test=" $theFragment_2 ">
-								<xsl:apply-templates
-									select="$theFragment_2 " mode="dsdl:go" />
-							</xsl:when>
-							<xsl:otherwise>
-								<!-- WARNING!  EXPERIMENTAL! Use at your own risk. This may be discontinued! -->
-								<xsl:apply-templates
-									select="  $theContainedFragments " mode="dsdl:go" />
-							</xsl:otherwise>
-						</xsl:choose>
-					</xsl:otherwise>
-				</xsl:choose>
-
-			</xsl:otherwise>
-		</xsl:choose>
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_END">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-	</xsl:template>
-	<!-- =========================================================== -->
-	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
-	<!-- Part 5 - DataType Library Language - DTLL                   -->
-	<!-- Committee Draft  Experimental support only                  -->
-	<!-- The <include> element may well be replaced by XInclude in   -->
-	<!-- any final version.                                          -->
-	<!-- =========================================================== -->
-	<xslt:template match="dtll:include" mode="dsdl:go">
-		<!-- Insert subschema -->
-
-		<xsl:variable name="document-uri"
-			select="substring-before(concat(@href,'#'), '#')" />
-		<xsl:variable name="fragment-id"
-			select="substring-after(@href, '#')" />
-		<xsl:processing-instruction name="DSDL_INCLUDE_START">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-		<xsl:choose>
-			<xsl:when test="not( $include-dtll = 'true' )">
-				<xslt:copy>
-					<xslt:copy-of select="@*" />
-					<xslt:apply-templates mode="dsdl:go" />
-				</xslt:copy>
-			</xsl:when>
-			<xsl:otherwise>
-				<xsl:choose>
-
-					<xsl:when
-						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
-						<xsl:message>
-							Error: Impossible URL in DTLL include
-						</xsl:message>
-					</xsl:when>
-
-					<!-- this case is when there is in embedded schema in the same document elsewhere -->
-					<xslt:when
-						test="string-length( $document-uri ) = 0">
-						<xslt:apply-templates mode="dsdl:go"
+							<xsl:if
+								test=" $theFragment_1/self::schold:schema ">
+								<xsl:message>
+									Schema error: Use include to include
+									fragments, not a whole schema
+								</xsl:message>
+							</xsl:if>
+							<xsl:if test="not($theFragment_1)">
+								<xsl:message terminate="no">
+									<xsl:text>Unable to locate id attribute: </xsl:text>
+									<xsl:value-of select="@href" />
+								</xsl:message>
+							</xsl:if>
+							<xsl:apply-templates
+								select=" $theFragment_1[1]" mode="dsdl:go" />
+						</xsl:for-each>
+					</xsl:when>
+
+					<!-- Case where there is no ID so we include the whole document -->
+					<!-- Experimental addition: include fragments of children -->
+					<xsl:otherwise>
+						<xsl:variable name="theDocument_2"
+							select="document( $document-uri,/ )" />
+						<xsl:variable name="theFragment_2"
+							select="$theDocument_2/iso:*" />
+						<xsl:variable name="theContainedFragments"
+							select="$theDocument_2/*/schold:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" />
+						<xsl:if test="not($theDocument_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+
+						<xsl:if
+							test=" $theFragment_2/self::schold:schema or $theContainedFragments/self::schold:schema">
+							<xsl:message>
+								Schema error: Use include to include
+								fragments, not a whole schema
+							</xsl:message>
+						</xsl:if>
+						<xsl:if
+							test="not($theFragment_2) and not ($theContainedFragments)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to locate id attribute: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<!-- If this were XLST 2, we could use  
+							if ($theFragment) then $theFragment else $theContainedFragments
+							here (thanks to KN)
+						-->
+						<xsl:choose>
+							<xsl:when test=" $theFragment_2 ">
+								<xsl:apply-templates
+									select="$theFragment_2 " mode="dsdl:go" />
+							</xsl:when>
+							<xsl:otherwise>
+								<!-- WARNING!  EXPERIMENTAL! Use at your own risk. This may be discontinued! -->
+								<xsl:apply-templates
+									select="  $theContainedFragments " mode="dsdl:go" />
+							</xsl:otherwise>
+						</xsl:choose>
+					</xsl:otherwise>
+				</xsl:choose>
+
+			</xsl:otherwise>
+		</xsl:choose>
+
+		<xsl:processing-instruction name="DSDL_INCLUDE_END">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+	</xsl:template>
+	<!-- =========================================================== -->
+	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
+	<!-- Part 5 - DataType Library Language - DTLL                   -->
+	<!-- Committee Draft  Experimental support only                  -->
+	<!-- The <include> element may well be replaced by XInclude in   -->
+	<!-- any final version.                                          -->
+	<!-- =========================================================== -->
+	<xslt:template match="dtll:include" mode="dsdl:go">
+		<!-- Insert subschema -->
+
+		<xsl:variable name="document-uri"
+			select="substring-before(concat(@href,'#'), '#')" />
+		<xsl:variable name="fragment-id"
+			select="substring-after(@href, '#')" />
+		<xsl:processing-instruction name="DSDL_INCLUDE_START">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+		<xsl:choose>
+			<xsl:when test="not( $include-dtll = 'true' )">
+				<xslt:copy>
+					<xslt:copy-of select="@*" />
+					<xslt:apply-templates mode="dsdl:go" />
+				</xslt:copy>
+			</xsl:when>
+			<xsl:otherwise>
+				<xsl:choose>
+
+					<xsl:when
+						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
+						<xsl:message>
+							Error: Impossible URL in DTLL include
+						</xsl:message>
+					</xsl:when>
+
+					<!-- this case is when there is in embedded schema in the same document elsewhere -->
+					<xslt:when
+						test="string-length( $document-uri ) = 0">
+						<xslt:apply-templates mode="dsdl:go"
 							select="//*[@xml:id= $fragment-id ] | id( $fragment-id) 
               	| //*[@id= $fragment-id ]" />
 					</xslt:when>
 
-					<xsl:when
-						test="string-length( $fragment-id ) &gt; 0">
-						<xsl:variable name="theDocument_1"
-							select="document( $document-uri,/ )" />
-						<xsl:if test="not($theDocument_1)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<!-- use for-each to rebase id() to $theDocument -->
-						<xsl:for-each select="$theDocument_1">
-							<xsl:variable name="theFragment_1"
+					<xsl:when
+						test="string-length( $fragment-id ) &gt; 0">
+						<xsl:variable name="theDocument_1"
+							select="document( $document-uri,/ )" />
+						<xsl:if test="not($theDocument_1)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<!-- use for-each to rebase id() to $theDocument -->
+						<xsl:for-each select="$theDocument_1">
+							<xsl:variable name="theFragment_1"
 								select="$theDocument_1//*[@xml:id= $fragment-id ]
                | id( $fragment-id ) 
                | $theDocument_1//*[@id= $fragment-id ]" />
@@ -865,96 +890,96 @@
 									<xsl:value-of select="@href" />
 								</xsl:message>
 							</xsl:if>
-							<xsl:apply-templates
-								select=" $theFragment_1[1]" mode="dsdl:go" />
-						</xsl:for-each>
-					</xsl:when>
-
-					<xsl:otherwise>
-						<xsl:variable name="theDocument_2"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="theFragment_2"
-							select="$theDocument_2/*" />
-
-						<xsl:if test="not($theDocument_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-
-						<xsl:if test="not($theFragment_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to locate id attribute: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<xsl:apply-templates select="$theFragment_2 "
-							mode="dsdl:go" />
-					</xsl:otherwise>
-				</xsl:choose>
-
-			</xsl:otherwise>
-		</xsl:choose>
-		<xsl:processing-instruction name="DSDL_INCLUDE_END">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-	</xslt:template>
-
-	<!-- =========================================================== -->
-	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
-	<!-- Part 7 - Character Repertoire Description Language - CRDL   -->
-	<!-- Final Committee Draft 2008-01-11 Experimental support only  -->
-	<!-- =========================================================== -->
-	<xslt:template match="crdl:ref" mode="dsdl:go">
-		<!-- Insert subschema -->
-
-		<xsl:variable name="document-uri"
-			select="substring-before(concat(@href,'#'), '#')" />
-		<xsl:variable name="fragment-id"
-			select="substring-after(@href, '#')" />
-		<xsl:processing-instruction name="DSDL_INCLUDE_START">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-		<xsl:choose>
-			<xsl:when test="not( $include-crdl = 'true' )">
-				<xslt:copy>
-					<xslt:copy-of select="@*" />
-					<xslt:apply-templates mode="dsdl:go" />
-				</xslt:copy>
-			</xsl:when>
-			<xsl:otherwise>
-				<xsl:choose>
-
-					<xsl:when
-						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
-						<xsl:message>
-							Error: Impossible URL in CRDL include
-						</xsl:message>
-					</xsl:when>
-
-					<!-- this case is when there is in embedded schema in the same document elsewhere -->
-					<xslt:when
-						test="string-length( $document-uri ) = 0">
-
-						<xslt:apply-templates mode="dsdl:go"
+							<xsl:apply-templates
+								select=" $theFragment_1[1]" mode="dsdl:go" />
+						</xsl:for-each>
+					</xsl:when>
+
+					<xsl:otherwise>
+						<xsl:variable name="theDocument_2"
+							select="document( $document-uri,/ )" />
+						<xsl:variable name="theFragment_2"
+							select="$theDocument_2/*" />
+
+						<xsl:if test="not($theDocument_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+
+						<xsl:if test="not($theFragment_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to locate id attribute: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<xsl:apply-templates select="$theFragment_2 "
+							mode="dsdl:go" />
+					</xsl:otherwise>
+				</xsl:choose>
+
+			</xsl:otherwise>
+		</xsl:choose>
+		<xsl:processing-instruction name="DSDL_INCLUDE_END">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+	</xslt:template>
+
+	<!-- =========================================================== -->
+	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
+	<!-- Part 7 - Character Repertoire Description Language - CRDL   -->
+	<!-- Final Committee Draft 2008-01-11 Experimental support only  -->
+	<!-- =========================================================== -->
+	<xslt:template match="crdl:ref" mode="dsdl:go">
+		<!-- Insert subschema -->
+
+		<xsl:variable name="document-uri"
+			select="substring-before(concat(@href,'#'), '#')" />
+		<xsl:variable name="fragment-id"
+			select="substring-after(@href, '#')" />
+		<xsl:processing-instruction name="DSDL_INCLUDE_START">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+		<xsl:choose>
+			<xsl:when test="not( $include-crdl = 'true' )">
+				<xslt:copy>
+					<xslt:copy-of select="@*" />
+					<xslt:apply-templates mode="dsdl:go" />
+				</xslt:copy>
+			</xsl:when>
+			<xsl:otherwise>
+				<xsl:choose>
+
+					<xsl:when
+						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
+						<xsl:message>
+							Error: Impossible URL in CRDL include
+						</xsl:message>
+					</xsl:when>
+
+					<!-- this case is when there is in embedded schema in the same document elsewhere -->
+					<xslt:when
+						test="string-length( $document-uri ) = 0">
+
+						<xslt:apply-templates mode="dsdl:go"
 							select="//*[@xml:id= $fragment-id ] | id( $fragment-id)
               	| //*[@id= $fragment-id ]" />
 					</xslt:when>
 
-					<xsl:when
-						test="string-length( $fragment-id ) &gt; 0">
-						<xsl:variable name="theDocument_1"
-							select="document( $document-uri,/ )" />
-						<xsl:if test="not($theDocument_1)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<!-- use for-each to rebase id() to $theDocument -->
-						<xsl:for-each select="$theDocument_1">
-							<xsl:variable name="theFragment_1"
+					<xsl:when
+						test="string-length( $fragment-id ) &gt; 0">
+						<xsl:variable name="theDocument_1"
+							select="document( $document-uri,/ )" />
+						<xsl:if test="not($theDocument_1)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<!-- use for-each to rebase id() to $theDocument -->
+						<xsl:for-each select="$theDocument_1">
+							<xsl:variable name="theFragment_1"
 								select="$theDocument_1//*[@xml:id= $fragment-id ]
                | id( $fragment-id )
                | $theDocument_1//*[@id= $fragment-id ]" />
@@ -965,239 +990,239 @@
 									<xsl:value-of select="@href" />
 								</xsl:message>
 							</xsl:if>
-							<xsl:apply-templates select=" $theFragment_1 "
-								mode="dsdl:go" />
-						</xsl:for-each>
-					</xsl:when>
-
-					<xsl:otherwise>
-						<xsl:variable name="theDocument_2"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="theFragment_2"
-							select="$theDocument_2/*" />
-
-						<xsl:if test="not($theDocument_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-						<xsl:if test="not($theFragment_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to locate id attribute: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-
-						<xsl:apply-templates select="$theFragment_2"
-							mode="dsdl:go" />
-					</xsl:otherwise>
-				</xsl:choose>
-
-			</xsl:otherwise>
-		</xsl:choose>
-		<xsl:processing-instruction name="DSDL_INCLUDE_END">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-	</xslt:template>
-
-
-	<!-- =========================================================== -->
-	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
-	<!-- Part 4 - Namespace-based Validation Dispatching Language - NVDL -->
-	<!-- Note: This does not include schemas referenced for          -->
-	<!-- validation, it merely handles any simple XIncludes          -->
-	<!-- =========================================================== -->
-	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
-	<!-- Part 8 - Document Schema Renaming Language - DSRL           -->
-	<!-- Note: Final? Committee Draft   Experimental support only    -->
-	<!-- =========================================================== -->
-	<!-- XInclude support for id based references only, with 1 level -->
-	<!-- of fallback.                                                -->
-	<!-- =========================================================== -->
-
-	<xslt:template mode="dsdl:go"
-		match="xi:include[@href][not(@parseType) or @parseType ='xml']">
-		<!-- Simple inclusions only here -->
-		<xsl:processing-instruction name="DSDL_INCLUDE_START">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-		<xsl:choose>
-			<xsl:when test="not( $include-xinclude = 'true' )">
-				<xslt:copy>
-					<xslt:copy-of select="@*" />
-					<xslt:apply-templates mode="dsdl:go" />
-				</xslt:copy>
-			</xsl:when>
-			<xsl:otherwise>
-				<xsl:choose>
-
-					<xsl:when test="contains( @href, '#')">
-						<xsl:message terminate="yes">
-							Fatal error: Xinclude href contains fragment
-							identifier #
-						</xsl:message>
-					</xsl:when>
-
-
-					<xsl:when test="contains( @xpointer, '(')">
-						<xsl:message terminate="yes">
-							Fatal error: Sorry, this software only
-							supports simple ids in XInclude xpointers
-						</xsl:message>
-					</xsl:when>
-
-					<xsl:when
-						test="string-length( @href ) = 0 and string-length( @xpointer ) = 0">
-
-						<xsl:message terminate="yes">
-							Fatal Error: Impossible URL in XInclude
-							include
-						</xsl:message>
-					</xsl:when>
-
-					<!-- this case is when there is in embedded schema in the same document elsewhere -->
-					<xslt:when test="string-length( @href ) = 0">
-
-						<xslt:apply-templates mode="dsdl:go"
+							<xsl:apply-templates select=" $theFragment_1 "
+								mode="dsdl:go" />
+						</xsl:for-each>
+					</xsl:when>
+
+					<xsl:otherwise>
+						<xsl:variable name="theDocument_2"
+							select="document( $document-uri,/ )" />
+						<xsl:variable name="theFragment_2"
+							select="$theDocument_2/*" />
+
+						<xsl:if test="not($theDocument_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+						<xsl:if test="not($theFragment_2)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to locate id attribute: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+
+						<xsl:apply-templates select="$theFragment_2"
+							mode="dsdl:go" />
+					</xsl:otherwise>
+				</xsl:choose>
+
+			</xsl:otherwise>
+		</xsl:choose>
+		<xsl:processing-instruction name="DSDL_INCLUDE_END">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+	</xslt:template>
+
+
+	<!-- =========================================================== -->
+	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
+	<!-- Part 4 - Namespace-based Validation Dispatching Language - NVDL -->
+	<!-- Note: This does not include schemas referenced for          -->
+	<!-- validation, it merely handles any simple XIncludes          -->
+	<!-- =========================================================== -->
+	<!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages   -->
+	<!-- Part 8 - Document Schema Renaming Language - DSRL           -->
+	<!-- Note: Final? Committee Draft   Experimental support only    -->
+	<!-- =========================================================== -->
+	<!-- XInclude support for id based references only, with 1 level -->
+	<!-- of fallback.                                                -->
+	<!-- =========================================================== -->
+
+	<xslt:template mode="dsdl:go"
+		match="xi:include[@href][not(@parseType) or @parseType ='xml']">
+		<!-- Simple inclusions only here -->
+		<xsl:processing-instruction name="DSDL_INCLUDE_START">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+		<xsl:choose>
+			<xsl:when test="not( $include-xinclude = 'true' )">
+				<xslt:copy>
+					<xslt:copy-of select="@*" />
+					<xslt:apply-templates mode="dsdl:go" />
+				</xslt:copy>
+			</xsl:when>
+			<xsl:otherwise>
+				<xsl:choose>
+
+					<xsl:when test="contains( @href, '#')">
+						<xsl:message terminate="yes">
+							Fatal error: Xinclude href contains fragment
+							identifier #
+						</xsl:message>
+					</xsl:when>
+
+
+					<xsl:when test="contains( @xpointer, '(')">
+						<xsl:message terminate="yes">
+							Fatal error: Sorry, this software only
+							supports simple ids in XInclude xpointers
+						</xsl:message>
+					</xsl:when>
+
+					<xsl:when
+						test="string-length( @href ) = 0 and string-length( @xpointer ) = 0">
+
+						<xsl:message terminate="yes">
+							Fatal Error: Impossible URL in XInclude
+							include
+						</xsl:message>
+					</xsl:when>
+
+					<!-- this case is when there is in embedded schema in the same document elsewhere -->
+					<xslt:when test="string-length( @href ) = 0">
+
+						<xslt:apply-templates mode="dsdl:go"
 							select="//*[@xml:id= current()/@xpointer  ] | id( @xpointer)
               	| //*[@id= current()/@xpointer  ]" />
 					</xslt:when>
 
-					<xsl:when
-						test="string-length( @xpointer ) &gt; 0">
-						<xsl:variable name="theDocument_1"
-							select="document( @href,/ )" />
-						<xsl:variable name="theFragment_1"
+					<xsl:when
+						test="string-length( @xpointer ) &gt; 0">
+						<xsl:variable name="theDocument_1"
+							select="document( @href,/ )" />
+						<xsl:variable name="theFragment_1"
 							select="$theDocument_1//*[@xml:id= current()/@xpointer  ]
              
               | $theDocument_1//*[@id= current()/@xpointer  ]" />
-						<!-- removed
-							| $theDocument_1/id( @xpointer)
-							because it requires rebasing in XSLT1 and that would mess up the use of current()
-						-->
-
-
-						<!-- Allow one level of fallback, to another XInclude -->
-						<xsl:if test="not($theDocument_1)">
-							<xsl:choose>
-								<xsl:when test="xi:fallback">
-									<xsl:variable name="theDocument_2"
+						<!-- removed
+							| $theDocument_1/id( @xpointer)
+							because it requires rebasing in XSLT1 and that would mess up the use of current()
+						-->
+
+
+						<!-- Allow one level of fallback, to another XInclude -->
+						<xsl:if test="not($theDocument_1)">
+							<xsl:choose>
+								<xsl:when test="xi:fallback">
+									<xsl:variable name="theDocument_2"
 										select="document( xi:fallback[1]/xi:include[not(@parseType)
                     	 or @parseType='xml']/@href,/ )" />
-									<xsl:variable name="theFragment_2"
+									<xsl:variable name="theFragment_2"
 										select="$theDocument_2//*[@xml:id= current()/xi:fallback[1]/xi:include/@xpointer  ]
               				| $theDocument_2//*[@id= current()/xi:fallback[1]/xi:include/@xpointer  ]" />
-									<!-- removed 
-										| $theDocument_2/id( xi:fallback[1]/xi:include/@xpointer)
-										because it id() would need rebasing in XSLT1 and that would mess up use of current()
-									-->
-
-									<xsl:if
-										test="not($theDocument_2)">
-
-										<xsl:message terminate="no">
+									<!-- removed 
+										| $theDocument_2/id( xi:fallback[1]/xi:include/@xpointer)
+										because it id() would need rebasing in XSLT1 and that would mess up use of current()
+									-->
+
+									<xsl:if
+										test="not($theDocument_2)">
+
+										<xsl:message terminate="no">
 											<xsl:text>Unable to open referenced included file and fallback
 									file: </xsl:text>
-											<xsl:value-of
-												select="@href" />
-										</xsl:message>
-									</xsl:if>
-								</xsl:when>
-								<xsl:otherwise>
-									<xsl:message terminate="no">
-										<xsl:text>Unable to open referenced included file: </xsl:text>
-										<xsl:value-of select="@href" />
-									</xsl:message>
-								</xsl:otherwise>
-							</xsl:choose>
-						</xsl:if>
-						<xsl:apply-templates select=" $theFragment_1"
-							mode="dsdl:go" />
-					</xsl:when>
-
-					<!-- Document but no fragment specified -->
-					<xsl:otherwise>
-						<xsl:variable name="theDocument_3"
-							select="document( @href,/ )" />
-						<xsl:variable name="theFragment_3"
-							select="$theDocument_3/*" />
-
-						<xsl:if test="not($theDocument_3)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@href" />
-							</xsl:message>
-						</xsl:if>
-
-						<xsl:apply-templates select="$theFragment_3 "
-							mode="dsdl:go" />
-					</xsl:otherwise>
-				</xsl:choose>
-
-			</xsl:otherwise>
-		</xsl:choose>
-		<xsl:processing-instruction name="DSDL_INCLUDE_END">
-			<xsl:value-of select="@href" />
-		</xsl:processing-instruction>
-	</xslt:template>
-
-	<!-- =========================================================== -->
-	<!-- W3C XLink 1.1 embedded simple links                        -->
-	<!-- =========================================================== -->
-	<xslt:template
+											<xsl:value-of
+												select="@href" />
+										</xsl:message>
+									</xsl:if>
+								</xsl:when>
+								<xsl:otherwise>
+									<xsl:message terminate="no">
+										<xsl:text>Unable to open referenced included file: </xsl:text>
+										<xsl:value-of select="@href" />
+									</xsl:message>
+								</xsl:otherwise>
+							</xsl:choose>
+						</xsl:if>
+						<xsl:apply-templates select=" $theFragment_1"
+							mode="dsdl:go" />
+					</xsl:when>
+
+					<!-- Document but no fragment specified -->
+					<xsl:otherwise>
+						<xsl:variable name="theDocument_3"
+							select="document( @href,/ )" />
+						<xsl:variable name="theFragment_3"
+							select="$theDocument_3/*" />
+
+						<xsl:if test="not($theDocument_3)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@href" />
+							</xsl:message>
+						</xsl:if>
+
+						<xsl:apply-templates select="$theFragment_3 "
+							mode="dsdl:go" />
+					</xsl:otherwise>
+				</xsl:choose>
+
+			</xsl:otherwise>
+		</xsl:choose>
+		<xsl:processing-instruction name="DSDL_INCLUDE_END">
+			<xsl:value-of select="@href" />
+		</xsl:processing-instruction>
+	</xslt:template>
+
+	<!-- =========================================================== -->
+	<!-- W3C XLink 1.1 embedded simple links                        -->
+	<!-- =========================================================== -->
+	<xslt:template
 		match="*[@xlink:href][not(parent::*[@xlink:type='complex'])]
 	           [not(@xlink:type) or (@xlink:type='simple')]
 	           [@xlink:show='embed']
-	           [not(@xlink:actuate) or (@xlink:actuate='onLoad')]"
-		mode="dsdl:go" priority="1">
-
-		<xsl:variable name="document-uri"
-			select="substring-before(concat(@xlink:href,'#'), '#')" />
-		<xsl:variable name="fragment-id"
-			select="substring-after(@xlink:href, '#')" />
-		<xsl:processing-instruction name="DSDL_INCLUDE_START">
-			<xsl:value-of select="@xlink:href" />
-		</xsl:processing-instruction>
-		<xsl:choose>
-			<xsl:when test="not( $include-xlink = 'true' )">
-				<xslt:copy>
-					<xslt:copy-of select="@*" />
-					<xslt:apply-templates mode="dsdl:go" />
-				</xslt:copy>
-			</xsl:when>
-			<xsl:otherwise>
-				<xsl:choose>
-
-					<xsl:when
-						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
-						<xsl:message>
-							Error: Impossible URL in XLink embedding
-							link
-						</xsl:message>
-					</xsl:when>
-
-					<!-- this case is when there is in embedded schema in the same document elsewhere -->
-					<xslt:when
-						test="string-length( $document-uri ) = 0">
-						<xslt:apply-templates mode="dsdl:go"
+	           [not(@xlink:actuate) or (@xlink:actuate='onLoad')]"
+		mode="dsdl:go" priority="1">
+
+		<xsl:variable name="document-uri"
+			select="substring-before(concat(@xlink:href,'#'), '#')" />
+		<xsl:variable name="fragment-id"
+			select="substring-after(@xlink:href, '#')" />
+		<xsl:processing-instruction name="DSDL_INCLUDE_START">
+			<xsl:value-of select="@xlink:href" />
+		</xsl:processing-instruction>
+		<xsl:choose>
+			<xsl:when test="not( $include-xlink = 'true' )">
+				<xslt:copy>
+					<xslt:copy-of select="@*" />
+					<xslt:apply-templates mode="dsdl:go" />
+				</xslt:copy>
+			</xsl:when>
+			<xsl:otherwise>
+				<xsl:choose>
+
+					<xsl:when
+						test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0">
+						<xsl:message>
+							Error: Impossible URL in XLink embedding
+							link
+						</xsl:message>
+					</xsl:when>
+
+					<!-- this case is when there is in embedded schema in the same document elsewhere -->
+					<xslt:when
+						test="string-length( $document-uri ) = 0">
+						<xslt:apply-templates mode="dsdl:go"
 							select="//*[@xml:id= $fragment-id ] | id( $fragment-id) 
               	| //*[@id= $fragment-id ]" />
 					</xslt:when>
 
-					<xsl:when
-						test="string-length( $fragment-id ) &gt; 0">
-						<xsl:variable name="theDocument_1"
-							select="document( $document-uri,/ )" />
-						<xsl:if test="not($theDocument_1)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@xlink:href" />
-							</xsl:message>
-						</xsl:if>
-						<!-- use for-each to rebase id() to $theDocument -->
-						<xsl:for-each select="$theDocument_1">
-							<xsl:variable name="theFragment_1"
+					<xsl:when
+						test="string-length( $fragment-id ) &gt; 0">
+						<xsl:variable name="theDocument_1"
+							select="document( $document-uri,/ )" />
+						<xsl:if test="not($theDocument_1)">
+							<xsl:message terminate="no">
+								<xsl:text>Unable to open referenced included file: </xsl:text>
+								<xsl:value-of select="@xlink:href" />
+							</xsl:message>
+						</xsl:if>
+						<!-- use for-each to rebase id() to $theDocument -->
+						<xsl:for-each select="$theDocument_1">
+							<xsl:variable name="theFragment_1"
 								select="$theDocument_1//*[@xml:id= $fragment-id ]
                | id( $fragment-id ) 
                | $theDocument_1//*[@id= $fragment-id ]" />
@@ -1207,302 +1232,303 @@
 									<xsl:value-of select="@xlink:href" />
 								</xsl:message>
 							</xsl:if>
-							<xsl:apply-templates
-								select=" $theFragment_1[1]" mode="dsdl:go" />
-						</xsl:for-each>
-					</xsl:when>
-
-					<xsl:otherwise>
-						<xsl:variable name="theDocument_2"
-							select="document( $document-uri,/ )" />
-						<xsl:variable name="theFragment_2"
-							select="$theDocument_2/*" />
-
-						<xsl:if test="not($theDocument_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to open referenced included file: </xsl:text>
-								<xsl:value-of select="@xlink:href" />
-							</xsl:message>
-						</xsl:if>
-
-						<xsl:if test="not($theFragment_2)">
-							<xsl:message terminate="no">
-								<xsl:text>Unable to locate id attribute: </xsl:text>
-								<xsl:value-of select="@xlink:href" />
-							</xsl:message>
-						</xsl:if>
-						<xsl:apply-templates select="$theFragment_2 "
-							mode="dsdl:go" />
-					</xsl:otherwise>
-				</xsl:choose>
-
-			</xsl:otherwise>
-		</xsl:choose>
-
-		<xsl:processing-instruction name="DSDL_INCLUDE_END">
-			<xsl:value-of select="@xlink:href" />
-		</xsl:processing-instruction>
-	</xslt:template>
-
-<!-- ================================================================= -->
-<!-- UTILITY TEMPLATES                                                 -->
-<!-- ================================================================= -->
-
-<!-- MESSAGE WHEN XPATH NOT WELL FORMED -->
-
-<xsl:template name="sch-check:xpath-wf-message" >
-  <xsl:param name="string" />
-  <xsl:param name="subject" />
-	  <xsl:variable name="xpath-wf-result">
-	      <xsl:call-template name="sch-check:xpath-wf">
-          <xsl:with-param name="string" select=" $string "  />
-        </xsl:call-template>
-	   </xsl:variable>
-	   
-	   <xsl:if test="string-length($xpath-wf-result) > 0">
-	      <xsl:message><xsl:value-of select="$subject"/><xsl:value-of select="$xpath-wf-result" /></xsl:message>
-	   </xsl:if>
-  </xsl:template>
- 
-<!-- XPATH WELL FORMED -->
- 
-<xsl:template name="sch-check:xpath-wf" >
-  <xsl:param name="string" />
-   <!-- This does some minimal checks to see if a string is well-formed XPath.
-   It checks 
-      1) String is not empty, 
-      2) equal number of open and close parens
-      3) equal number of left and right square brackets
-   It does not check balancing. It does not check inside string literals in XPaths.
-   
-   If there is no error, empty content is returned. If there is an error, it is given
-   as an error message. This is not localized yet.
-   --> 
-   
-   
-   <xsl:variable name="stripped-contents">
-   <xsl:call-template name="sch-check:strip-strings" >  
-            <xsl:with-param name="string" select=" $string " />
-            <xsl:with-param name="mode" select="  0" />
-   </xsl:call-template>
-   </xsl:variable>
-   
-      
-   <xsl:variable name="paren-result">
-   <xsl:call-template name="sch-check:test-paren" >  
-            <xsl:with-param name="string" select="$stripped-contents" />
-            <xsl:with-param name="count" select="  0" />
-   </xsl:call-template>
-   </xsl:variable>
-    
-   
-   <xsl:variable name="sqb-result">
-   <xsl:call-template name="sch-check:test-sqb" >  
-            <xsl:with-param name="string" select="$stripped-contents" />
-            <xsl:with-param name="count" select="  0" />
-   </xsl:call-template>
-   </xsl:variable>
-    
-   
-   <xsl:choose>
-      <xsl:when test="string-length( normalize-space($string)) = 0"
-      >XPath error. No XPath.</xsl:when>
-         <xsl:when test="contains( $stripped-contents, '/[' )"
-      >XPath error. Missing location step. Suggestion: remove '/' before '['.
-      <xsl:value-of select=" normalize-space($string)"/></xsl:when>
-      <!-- not implemented yet 
-      <xsl:when test=" count () mod 2 = 1" 
-      >XPath syntax error. Odd number of apostrophe characters. Suggestion: check string termination and delimiting.
-      <xsl:value-of select=" normalize-space($string)"/></xsl:when>
-      <xsl:when test=" count ( ) mod 2 = 1" 
-      >XPath syntax error. Odd number of quote characters. Suggestion: check string termination and delimiting.
-      <xsl:value-of select=" normalize-space($string)"/></xsl:when>
-      -->
-      <xsl:when test=" $paren-result > 0 "
-      >XPath syntax error. Unclosed parenthesis. Suggestion: add ')'.
-      <xsl:value-of select=" normalize-space($string)"/></xsl:when>
-      <xsl:when test=" $paren-result &lt; 0 "
-      >XPath syntax error. Extra close parenthesis. Suggestion: remove ')'.
-      <xsl:value-of select=" normalize-space($string)"/></xsl:when>
-     
-      <xsl:when test=" $sqb-result > 0 "
-      >XPath syntax error. Unclosed left square bracket. Suggestion: add ']'.
-      <xsl:value-of select=" normalize-space($string)"/></xsl:when>
-      <xsl:when test=" $sqb-result &lt; 0 "
-      >XPath syntax error. Extra right square bracket. Suggestion: remove ']'.
-      <xsl:value-of select=" normalize-space($string)"/></xsl:when>
-
-  </xsl:choose>       
- 
- 
- 
-</xsl:template> 
-
-
-<!--  STRIP XPATH STRINGS -->
-<xsl:template name="sch-check:strip-strings">
-  <xsl:param name="string" />
-  <xsl:param name="mode" />
-  
-  <!-- 
-    mode 0 =  outside string 
-    mode 1 = in double quote string 
-    mode 2 = in single quote string
-  -->
-  <xsl:choose>
-     <xsl:when test=" string-length( $string) = 0" />
-     <xsl:when test="$mode = 1 ">
-      <xsl:choose> 
-          
-          
-           <xsl:when test="starts-with( $string, '&quot;&quot;') " >
-       
-           	<xsl:call-template name="sch-check:strip-strings">
-            	<xsl:with-param name="string" select="  substring ( $string, 3 )"/>
-            	<xsl:with-param name="mode" select=" $mode" />
-         	</xsl:call-template>
-           </xsl:when> 
-           <xsl:when test="starts-with( $string, '&quot;') " >
-           	<xsl:call-template name="sch-check:strip-strings

<TRUNCATED>