zookeeper-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Abhay Bothra (JIRA)" <j...@apache.org>
Subject [jira] [Updated] (ZOOKEEPER-2745) Node loses data after disk-full event, but successfully joins Quorum
Date Tue, 04 Apr 2017 23:13:41 GMT

     [ https://issues.apache.org/jira/browse/ZOOKEEPER-2745?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]

Abhay Bothra updated ZOOKEEPER-2745:
------------------------------------
    Description: 
If disk is full on 1 zookeeper node in a 3 node ensemble, it is able to join the quorum with
partial data.

Setup:
--------
- Running a 3 node zookeeper ensemble on Ubuntu 12.04 as upstart services. Let's call the
nodes: A, B and C.

Observation:
-----------------
- Connecting to 2 (Node A and B) of the 3 nodes and doing an `ls` in zookeeper data directory
was giving:
/foo
/bar
/baz
But an `ls` on node C was giving:
/baz
- On node C, the zookeeper data directory had the following files:
log.1001
log.1600
snapshot.1000 -> size 200
snapshot.1200 -> size 269
snapshot.1300 -> size 300
- Snapshot sizes on node A and B were in the vicinity of 500KB

RCA
-------
- Disk was full on node C prior to the creation time of the small snapshot
  files.
- Looking at zookeeper server logs, we observed that zookeeper had crashed and restarted a
few times after the first instance of disk full. Everytime time zookeeper starts, it does
3 things:
  1. Run the purge task to cleanup old snapshot and txn logs. Our
  autopurge.snapRetainCount is set to 3.
  2. Restore from the most recent valid snapshot and the txn logs that follow.
  3. Take part in a leader election - realize it has missed something - become the follower
- get diff of missed txns from the current leader - create a new snapshot of its current state.
- We confirmed that a valid snapshot of the system had existed prior to, and
  immediately after the crash. Let's call this snapshot snapshot.800.
- Over the next 3 restarts, zookeeper did the following:
  - Purged older snapshots
  - Restored from snapshot.800 + txn logs
  - Synced up with master, tried to write its updated state to a new snapshot. Crashed due
to disk full. The snapshot file, even though invalid, had been created.
- *Note*: This is the first source of the bug. It might be more appropriate to first write
the snapshot to a temporary file, and then rename it
snapshot.<txn_id>. That would gives us more confidence in the validity of snapshots
in the data dir. 
- Let's say the snapshot files created above were snapshot.850, snapshot.920 and snapshot.950
- On the 4th restart, the purge task retained the 3 recent snapshots - snapshot.850, snapshot.920,
and snapshot.950, and proceeded to purge snapshot.800 and associated txn logs assuming that
they were no longer needed.
- *Note*: This is the second source of the bug. Instead of retaining the 3 most recent *valid*
snapshots, the server just retains 3 most recent snapshots, regardless of their validity.
- When restoring, zookeeper doesn't find any valid snapshot logs to restore from. So it tries
to reload its state from txn logs starting at zxid 0. However, those transaction logs would
have long ago been garbage collected. It reloads from whatever txn logs are present. Let's
say the only txn log file present (log.951) contains logs for zxid 951 to 998.  It reloads
from that log file, syncs with master - gets txns 999 and 1000, and writes the snapshot log
snapshot.1000 to disk. Now that we have deleted snapshot.800, we have enough free disk space
to write snapshot.1000. From this state onwards, zookeeper will always assume it has the state
till txn id 1000, even though it only has state from txn id 951 to 1000.
- *Note*: This is the third source of the bug. On restore, if snapshot.X is the latest valid
snapshot file, the zookeeper server should validate that it can find txn with zxid X+1 in
one of the txn logs.  Otherwise, it should not use any of the txn logs during restore.

  was:
If disk is full on 1 zookeeper node in a 3 node ensemble, it is able to join the quorum with
partial data.

Setup:
--------
- Running a 3 node zookeeper ensemble on Ubuntu 12.04 as upstart services. Let's call the
nodes: A, B and C.

Observation:
-----------------
- Connecting to 2 (Node A and B) of the 3 nodes and doing an `ls` in zookeeper data directory
was giving:
/foo
/bar
/baz
But an `ls` on node C was giving:
/baz
- On node C, the zookeeper data directory had the following files:
log.1001
log.1600
snapshot.1000 -> size 200
snapshot.1200 -> size 269
snapshot.1300 -> size 300
- Snapshot sizes on node A and B were in the vicinity of 500KB

RCA
-------
- Disk was full on node C prior to the creation time of the small snapshot
  files.
- Looking at zookeeper server logs, we observed that zookeeper had crashed and restarted a
few times after the first instance of disk full. Everytime time zookeeper starts, it does
3 things:
  1. Run the purge task to cleanup old snapshot and txn logs. Our
  autopurge.snapRetainCount is set to 3.
  2. Restore from the most recent valid snapshot and the txn logs that follow.
  3. Take part in a leader election - realize it has missed something - become the follower
- get diff of missed txns from the current leader - create a new snapshot of its current state.
- We confirmed that a valid snapshot of the system had existed prior to, and
  immediately after the crash. Let's call this snapshot snapshot.800.
- Over the next 3 restarts, zookeeper did the following:
  - Purged older snapshots
  - Restored from snapshot.800 + txn logs
  - Synced up with master, tried to write its updated state to a new snapshot. Crashed due
to disk full. The snapshot file, even though invalid, had been created.
- *Note*: This is the first source of the bug. It might be more appropriate to first write
the snapshot to a temporary file, and then rename it
snapshot.<txn_id>. That would gives us more confidence in the validity of snapshots
in the data dir. 
- Let's say the snapshot files created above were snapshot.850, snapshot.920 and snapshot.950
- On the 4th restart, the purge task retained the 3 recent snapshots - snapshot.850, snapshot.920,
and snapshot.950, and proceeded to purge snapshot.800 and associated txn logs assuming that
they were no longer needed.
- *Note*: This is the second source of the bug. Instead of retaining the 3 most recent *valid*
snapshots, the server just retains 3 most recent snapshots, regardless of their validity.
- When restoring, zookeeper doesn't find any valid snapshot logs to restore from. So it tries
to reload its state from txn logs starting at zxid 0. However, those transaction logs would
have long ago been garbage collected. It reloads from whatever txn logs are present. Let's
say the only txn log file present (log.951) contains logs for zxid 951 to 998.  It reloads
from that log file, syncs with master - gets txns 999 and 1000, and writes the snapshot log
snapshot.1000 to disk. Now that we have deleted snapshot.800, we have enough free disk space
to write snapshot.1000. From this state onwards, zookeeper will always assume it has the state
till txn id 1000, even though it only has state from txn id 951 to 1000.
- *Note*: This is the third source of the bug. On restore, if snapshot.X is the latest valid
snapshot file, the zookeeper server should validate that it can find txn with zxid X+1 in
one of the txn logs.  Otherwise, it should either die, or thrown an IOException.


> Node loses data after disk-full event, but successfully joins Quorum
> --------------------------------------------------------------------
>
>                 Key: ZOOKEEPER-2745
>                 URL: https://issues.apache.org/jira/browse/ZOOKEEPER-2745
>             Project: ZooKeeper
>          Issue Type: Bug
>          Components: server
>    Affects Versions: 3.4.6
>         Environment: Ubuntu 12.04
>            Reporter: Abhay Bothra
>         Attachments: ZOOKEEPER-2745.patch
>
>
> If disk is full on 1 zookeeper node in a 3 node ensemble, it is able to join the quorum
with partial data.
> Setup:
> --------
> - Running a 3 node zookeeper ensemble on Ubuntu 12.04 as upstart services. Let's call
the nodes: A, B and C.
> Observation:
> -----------------
> - Connecting to 2 (Node A and B) of the 3 nodes and doing an `ls` in zookeeper data directory
was giving:
> /foo
> /bar
> /baz
> But an `ls` on node C was giving:
> /baz
> - On node C, the zookeeper data directory had the following files:
> log.1001
> log.1600
> snapshot.1000 -> size 200
> snapshot.1200 -> size 269
> snapshot.1300 -> size 300
> - Snapshot sizes on node A and B were in the vicinity of 500KB
> RCA
> -------
> - Disk was full on node C prior to the creation time of the small snapshot
>   files.
> - Looking at zookeeper server logs, we observed that zookeeper had crashed and restarted
a few times after the first instance of disk full. Everytime time zookeeper starts, it does
3 things:
>   1. Run the purge task to cleanup old snapshot and txn logs. Our
>   autopurge.snapRetainCount is set to 3.
>   2. Restore from the most recent valid snapshot and the txn logs that follow.
>   3. Take part in a leader election - realize it has missed something - become the follower
- get diff of missed txns from the current leader - create a new snapshot of its current state.
> - We confirmed that a valid snapshot of the system had existed prior to, and
>   immediately after the crash. Let's call this snapshot snapshot.800.
> - Over the next 3 restarts, zookeeper did the following:
>   - Purged older snapshots
>   - Restored from snapshot.800 + txn logs
>   - Synced up with master, tried to write its updated state to a new snapshot. Crashed
due to disk full. The snapshot file, even though invalid, had been created.
> - *Note*: This is the first source of the bug. It might be more appropriate to first
write the snapshot to a temporary file, and then rename it
> snapshot.<txn_id>. That would gives us more confidence in the validity of snapshots
in the data dir. 
> - Let's say the snapshot files created above were snapshot.850, snapshot.920 and snapshot.950
> - On the 4th restart, the purge task retained the 3 recent snapshots - snapshot.850,
snapshot.920, and snapshot.950, and proceeded to purge snapshot.800 and associated txn logs
assuming that they were no longer needed.
> - *Note*: This is the second source of the bug. Instead of retaining the 3 most recent
*valid* snapshots, the server just retains 3 most recent snapshots, regardless of their validity.
> - When restoring, zookeeper doesn't find any valid snapshot logs to restore from. So
it tries to reload its state from txn logs starting at zxid 0. However, those transaction
logs would have long ago been garbage collected. It reloads from whatever txn logs are present.
Let's say the only txn log file present (log.951) contains logs for zxid 951 to 998.  It reloads
from that log file, syncs with master - gets txns 999 and 1000, and writes the snapshot log
snapshot.1000 to disk. Now that we have deleted snapshot.800, we have enough free disk space
to write snapshot.1000. From this state onwards, zookeeper will always assume it has the state
till txn id 1000, even though it only has state from txn id 951 to 1000.
> - *Note*: This is the third source of the bug. On restore, if snapshot.X is the latest
valid snapshot file, the zookeeper server should validate that it can find txn with zxid X+1
in one of the txn logs.  Otherwise, it should not use any of the txn logs during restore.



--
This message was sent by Atlassian JIRA
(v6.3.15#6346)

Mime
View raw message