usergrid-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From snoopd...@apache.org
Subject [27/28] incubator-usergrid git commit: Remove binaries from source code control, we were already excluding them from the build.
Date Thu, 08 Jan 2015 21:12:51 GMT
http://git-wip-us.apache.org/repos/asf/incubator-usergrid/blob/31ad5987/sdks/dotnet/packages/NUnit.2.6.2/lib/nunit.framework.xml
----------------------------------------------------------------------
diff --git a/sdks/dotnet/packages/NUnit.2.6.2/lib/nunit.framework.xml b/sdks/dotnet/packages/NUnit.2.6.2/lib/nunit.framework.xml
deleted file mode 100644
index 2c86166..0000000
--- a/sdks/dotnet/packages/NUnit.2.6.2/lib/nunit.framework.xml
+++ /dev/null
@@ -1,10915 +0,0 @@
-<?xml version="1.0"?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<doc>
-    <assembly>
-        <name>nunit.framework</name>
-    </assembly>
-    <members>
-        <member name="T:NUnit.Framework.CategoryAttribute">
-            <summary>
-            Attribute used to apply a category to a test
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.CategoryAttribute.categoryName">
-            <summary>
-            The name of the category
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.CategoryAttribute.#ctor(System.String)">
-            <summary>
-            Construct attribute for a given category based on
-            a name. The name may not contain the characters ',',
-            '+', '-' or '!'. However, this is not checked in the
-            constructor since it would cause an error to arise at
-            as the test was loaded without giving a clear indication
-            of where the problem is located. The error is handled
-            in NUnitFramework.cs by marking the test as not
-            runnable.
-            </summary>
-            <param name="name">The name of the category</param>
-        </member>
-        <member name="M:NUnit.Framework.CategoryAttribute.#ctor">
-            <summary>
-            Protected constructor uses the Type name as the name
-            of the category.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.CategoryAttribute.Name">
-            <summary>
-            The name of the category
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.DatapointAttribute">
-            <summary>
-            Used to mark a field for use as a datapoint when executing a theory
-            within the same fixture that requires an argument of the field's Type.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.DatapointsAttribute">
-            <summary>
-            Used to mark an array as containing a set of datapoints to be used
-            executing a theory within the same fixture that requires an argument 
-            of the Type of the array elements.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.DescriptionAttribute">
-            <summary>
-            Attribute used to provide descriptive text about a 
-            test case or fixture.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.DescriptionAttribute.#ctor(System.String)">
-            <summary>
-            Construct the attribute
-            </summary>
-            <param name="description">Text describing the test</param>
-        </member>
-        <member name="P:NUnit.Framework.DescriptionAttribute.Description">
-            <summary>
-            Gets the test description
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.MessageMatch">
-            <summary>
-            Enumeration indicating how the expected message parameter is to be used
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.MessageMatch.Exact">
-            Expect an exact match
-        </member>
-        <member name="F:NUnit.Framework.MessageMatch.Contains">
-            Expect a message containing the parameter string
-        </member>
-        <member name="F:NUnit.Framework.MessageMatch.Regex">
-            Match the regular expression provided as a parameter
-        </member>
-        <member name="F:NUnit.Framework.MessageMatch.StartsWith">
-            Expect a message that starts with the parameter string
-        </member>
-        <member name="T:NUnit.Framework.ExpectedExceptionAttribute">
-            <summary>
-            ExpectedExceptionAttribute
-            </summary>
-            
-        </member>
-        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor">
-            <summary>
-            Constructor for a non-specific exception
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.Type)">
-            <summary>
-            Constructor for a given type of exception
-            </summary>
-            <param name="exceptionType">The type of the expected exception</param>
-        </member>
-        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.String)">
-            <summary>
-            Constructor for a given exception name
-            </summary>
-            <param name="exceptionName">The full name of the expected exception</param>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedException">
-            <summary>
-            Gets or sets the expected exception type
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedExceptionName">
-            <summary>
-            Gets or sets the full Type name of the expected exception
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedMessage">
-            <summary>
-            Gets or sets the expected message text
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.UserMessage">
-            <summary>
-            Gets or sets the user message displayed in case of failure
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.MatchType">
-            <summary>
-             Gets or sets the type of match to be performed on the expected message
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.Handler">
-            <summary>
-             Gets the name of a method to be used as an exception handler
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.ExplicitAttribute">
-            <summary>
-            ExplicitAttribute marks a test or test fixture so that it will
-            only be run if explicitly executed from the gui or command line
-            or if it is included by use of a filter. The test will not be
-            run simply because an enclosing suite is run.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.ExplicitAttribute.#ctor">
-            <summary>
-            Default constructor
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.ExplicitAttribute.#ctor(System.String)">
-            <summary>
-            Constructor with a reason
-            </summary>
-            <param name="reason">The reason test is marked explicit</param>
-        </member>
-        <member name="P:NUnit.Framework.ExplicitAttribute.Reason">
-            <summary>
-            The reason test is marked explicit
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.IgnoreAttribute">
-            <summary>
-            Attribute used to mark a test that is to be ignored.
-            Ignored tests result in a warning message when the
-            tests are run.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.IgnoreAttribute.#ctor">
-            <summary>
-            Constructs the attribute without giving a reason 
-            for ignoring the test.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.IgnoreAttribute.#ctor(System.String)">
-            <summary>
-            Constructs the attribute giving a reason for ignoring the test
-            </summary>
-            <param name="reason">The reason for ignoring the test</param>
-        </member>
-        <member name="P:NUnit.Framework.IgnoreAttribute.Reason">
-            <summary>
-            The reason for ignoring a test
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.IncludeExcludeAttribute">
-            <summary>
-            Abstract base for Attributes that are used to include tests
-            in the test run based on environmental settings.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor">
-            <summary>
-            Constructor with no included items specified, for use
-            with named property syntax.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor(System.String)">
-            <summary>
-            Constructor taking one or more included items
-            </summary>
-            <param name="include">Comma-delimited list of included items</param>
-        </member>
-        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Include">
-            <summary>
-            Name of the item that is needed in order for
-            a test to run. Multiple itemss may be given,
-            separated by a comma.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Exclude">
-            <summary>
-            Name of the item to be excluded. Multiple items
-            may be given, separated by a comma.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Reason">
-            <summary>
-            The reason for including or excluding the test
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.PlatformAttribute">
-            <summary>
-            PlatformAttribute is used to mark a test fixture or an
-            individual method as applying to a particular platform only.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.PlatformAttribute.#ctor">
-            <summary>
-            Constructor with no platforms specified, for use
-            with named property syntax.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.PlatformAttribute.#ctor(System.String)">
-            <summary>
-            Constructor taking one or more platforms
-            </summary>
-            <param name="platforms">Comma-deliminted list of platforms</param>
-        </member>
-        <member name="T:NUnit.Framework.CultureAttribute">
-            <summary>
-            CultureAttribute is used to mark a test fixture or an
-            individual method as applying to a particular Culture only.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.CultureAttribute.#ctor">
-            <summary>
-            Constructor with no cultures specified, for use
-            with named property syntax.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.CultureAttribute.#ctor(System.String)">
-            <summary>
-            Constructor taking one or more cultures
-            </summary>
-            <param name="cultures">Comma-deliminted list of cultures</param>
-        </member>
-        <member name="T:NUnit.Framework.CombinatorialAttribute">
-            <summary>
-            Marks a test to use a combinatorial join of any argument data 
-            provided. NUnit will create a test case for every combination of 
-            the arguments provided. This can result in a large number of test
-            cases and so should be used judiciously. This is the default join
-            type, so the attribute need not be used except as documentation.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.PropertyAttribute">
-            <summary>
-            PropertyAttribute is used to attach information to a test as a name/value pair..
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.String)">
-            <summary>
-            Construct a PropertyAttribute with a name and string value
-            </summary>
-            <param name="propertyName">The name of the property</param>
-            <param name="propertyValue">The property value</param>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Int32)">
-            <summary>
-            Construct a PropertyAttribute with a name and int value
-            </summary>
-            <param name="propertyName">The name of the property</param>
-            <param name="propertyValue">The property value</param>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Double)">
-            <summary>
-            Construct a PropertyAttribute with a name and double value
-            </summary>
-            <param name="propertyName">The name of the property</param>
-            <param name="propertyValue">The property value</param>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor">
-            <summary>
-            Constructor for derived classes that set the
-            property dictionary directly.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.Object)">
-            <summary>
-            Constructor for use by derived classes that use the
-            name of the type as the property name. Derived classes
-            must ensure that the Type of the property value is
-            a standard type supported by the BCL. Any custom
-            types will cause a serialization Exception when
-            in the client.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.PropertyAttribute.Properties">
-            <summary>
-            Gets the property dictionary for this attribute
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.CombinatorialAttribute.#ctor">
-            <summary>
-            Default constructor
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.PairwiseAttribute">
-            <summary>
-            Marks a test to use pairwise join of any argument data provided. 
-            NUnit will attempt too excercise every pair of argument values at 
-            least once, using as small a number of test cases as it can. With
-            only two arguments, this is the same as a combinatorial join.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.PairwiseAttribute.#ctor">
-            <summary>
-            Default constructor
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.SequentialAttribute">
-            <summary>
-            Marks a test to use a sequential join of any argument data
-            provided. NUnit will use arguements for each parameter in
-            sequence, generating test cases up to the largest number
-            of argument values provided and using null for any arguments
-            for which it runs out of values. Normally, this should be
-            used with the same number of arguments for each parameter.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.SequentialAttribute.#ctor">
-            <summary>
-            Default constructor
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.MaxTimeAttribute">
-            <summary>
-            Summary description for MaxTimeAttribute.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.MaxTimeAttribute.#ctor(System.Int32)">
-            <summary>
-            Construct a MaxTimeAttribute, given a time in milliseconds.
-            </summary>
-            <param name="milliseconds">The maximum elapsed time in milliseconds</param>
-        </member>
-        <member name="T:NUnit.Framework.RandomAttribute">
-            <summary>
-            RandomAttribute is used to supply a set of random values
-            to a single parameter of a parameterized test.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.ValuesAttribute">
-            <summary>
-            ValuesAttribute is used to provide literal arguments for
-            an individual parameter of a test.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.ParameterDataAttribute">
-            <summary>
-            Abstract base class for attributes that apply to parameters 
-            and supply data for the parameter.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.ParameterDataAttribute.GetData(System.Reflection.ParameterInfo)">
-            <summary>
-            Gets the data to be provided to the specified parameter
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.ValuesAttribute.data">
-            <summary>
-            The collection of data to be returned. Must
-            be set by any derived attribute classes.
-            We use an object[] so that the individual
-            elements may have their type changed in GetData
-            if necessary.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object)">
-            <summary>
-            Construct with one argument
-            </summary>
-            <param name="arg1"></param>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object)">
-            <summary>
-            Construct with two arguments
-            </summary>
-            <param name="arg1"></param>
-            <param name="arg2"></param>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object,System.Object)">
-            <summary>
-            Construct with three arguments
-            </summary>
-            <param name="arg1"></param>
-            <param name="arg2"></param>
-            <param name="arg3"></param>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object[])">
-            <summary>
-            Construct with an array of arguments
-            </summary>
-            <param name="args"></param>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.GetData(System.Reflection.ParameterInfo)">
-            <summary>
-            Get the collection of values to be used as arguments
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32)">
-            <summary>
-            Construct a set of doubles from 0.0 to 1.0,
-            specifying only the count.
-            </summary>
-            <param name="count"></param>
-        </member>
-        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Double,System.Double,System.Int32)">
-            <summary>
-            Construct a set of doubles from min to max
-            </summary>
-            <param name="min"></param>
-            <param name="max"></param>
-            <param name="count"></param>
-        </member>
-        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
-            <summary>
-            Construct a set of ints from min to max
-            </summary>
-            <param name="min"></param>
-            <param name="max"></param>
-            <param name="count"></param>
-        </member>
-        <member name="M:NUnit.Framework.RandomAttribute.GetData(System.Reflection.ParameterInfo)">
-            <summary>
-            Get the collection of values to be used as arguments
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.RangeAttribute">
-            <summary>
-            RangeAttribute is used to supply a range of values to an
-            individual parameter of a parameterized test.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32)">
-            <summary>
-            Construct a range of ints using default step of 1
-            </summary>
-            <param name="from"></param>
-            <param name="to"></param>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
-            <summary>
-            Construct a range of ints specifying the step size 
-            </summary>
-            <param name="from"></param>
-            <param name="to"></param>
-            <param name="step"></param>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int64,System.Int64,System.Int64)">
-            <summary>
-            Construct a range of longs
-            </summary>
-            <param name="from"></param>
-            <param name="to"></param>
-            <param name="step"></param>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Double,System.Double,System.Double)">
-            <summary>
-            Construct a range of doubles
-            </summary>
-            <param name="from"></param>
-            <param name="to"></param>
-            <param name="step"></param>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Single,System.Single,System.Single)">
-            <summary>
-            Construct a range of floats
-            </summary>
-            <param name="from"></param>
-            <param name="to"></param>
-            <param name="step"></param>
-        </member>
-        <member name="T:NUnit.Framework.RepeatAttribute">
-            <summary>
-            RepeatAttribute may be applied to test case in order
-            to run it multiple times.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.RepeatAttribute.#ctor(System.Int32)">
-            <summary>
-            Construct a RepeatAttribute
-            </summary>
-            <param name="count">The number of times to run the test</param>
-        </member>
-        <member name="T:NUnit.Framework.RequiredAddinAttribute">
-            <summary>
-            RequiredAddinAttribute may be used to indicate the names of any addins
-            that must be present in order to run some or all of the tests in an
-            assembly. If the addin is not loaded, the entire assembly is marked
-            as NotRunnable.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiredAddinAttribute.#ctor(System.String)">
-            <summary>
-            Initializes a new instance of the <see cref="T:RequiredAddinAttribute"/> class.
-            </summary>
-            <param name="requiredAddin">The required addin.</param>
-        </member>
-        <member name="P:NUnit.Framework.RequiredAddinAttribute.RequiredAddin">
-            <summary>
-            Gets the name of required addin.
-            </summary>
-            <value>The required addin name.</value>
-        </member>
-        <member name="T:NUnit.Framework.SetCultureAttribute">
-            <summary>
-            Summary description for SetCultureAttribute.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.SetCultureAttribute.#ctor(System.String)">
-            <summary>
-            Construct given the name of a culture
-            </summary>
-            <param name="culture"></param>
-        </member>
-        <member name="T:NUnit.Framework.SetUICultureAttribute">
-            <summary>
-            Summary description for SetUICultureAttribute.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.SetUICultureAttribute.#ctor(System.String)">
-            <summary>
-            Construct given the name of a culture
-            </summary>
-            <param name="culture"></param>
-        </member>
-        <member name="T:NUnit.Framework.SetUpAttribute">
-            <summary>
-            SetUpAttribute is used in a TestFixture to identify a method
-            that is called immediately before each test is run. It is 
-            also used in a SetUpFixture to identify the method that is
-            called once, before any of the subordinate tests are run.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.SetUpFixtureAttribute">
-            <summary>
-            Attribute used to mark a class that contains one-time SetUp 
-            and/or TearDown methods that apply to all the tests in a
-            namespace or an assembly.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.SuiteAttribute">
-            <summary>
-            Attribute used to mark a static (shared in VB) property
-            that returns a list of tests.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.TearDownAttribute">
-            <summary>
-            Attribute used in a TestFixture to identify a method that is 
-            called immediately after each test is run. It is also used
-            in a SetUpFixture to identify the method that is called once,
-            after all subordinate tests have run. In either case, the method 
-            is guaranteed to be called, even if an exception is thrown.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestActionAttribute">
-            <summary>
-            Provide actions to execute before and after tests.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.ITestAction">
-            <summary>
-            When implemented by an attribute, this interface implemented to provide actions to execute before and after tests.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.ITestAction.BeforeTest(NUnit.Framework.TestDetails)">
-            <summary>
-            Executed before each test is run
-            </summary>
-            <param name="testDetails">Provides details about the test that is going to be run.</param>
-        </member>
-        <member name="M:NUnit.Framework.ITestAction.AfterTest(NUnit.Framework.TestDetails)">
-            <summary>
-            Executed after each test is run
-            </summary>
-            <param name="testDetails">Provides details about the test that has just been run.</param>
-        </member>
-        <member name="P:NUnit.Framework.ITestAction.Targets">
-            <summary>
-            Provides the target for the action attribute
-            </summary>
-            <returns>The target for the action attribute</returns>
-        </member>
-        <member name="T:NUnit.Framework.TestAttribute">
-            <summary>
-            Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/> 
-            class makes the method callable from the NUnit test runner. There is a property 
-            called Description which is optional which you can provide a more detailed test
-            description. This class cannot be inherited.
-            </summary>
-            
-            <example>
-            [TestFixture]
-            public class Fixture
-            {
-              [Test]
-              public void MethodToTest()
-              {}
-              
-              [Test(Description = "more detailed description")]
-              publc void TestDescriptionMethod()
-              {}
-            }
-            </example>
-            
-        </member>
-        <member name="P:NUnit.Framework.TestAttribute.Description">
-            <summary>
-            Descriptive text for this test
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestCaseAttribute">
-            <summary>
-            TestCaseAttribute is used to mark parameterized test cases
-            and provide them with their arguments.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.ITestCaseData">
-            <summary>
-            The ITestCaseData interface is implemented by a class
-            that is able to return complete testcases for use by
-            a parameterized test method.
-            
-            NOTE: This interface is used in both the framework
-            and the core, even though that results in two different
-            types. However, sharing the source code guarantees that
-            the various implementations will be compatible and that
-            the core is able to reflect successfully over the
-            framework implementations of ITestCaseData.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Arguments">
-            <summary>
-            Gets the argument list to be provided to the test
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Result">
-            <summary>
-            Gets the expected result
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.HasExpectedResult">
-            <summary>
-            Indicates whether a result has been specified.
-            This is necessary because the result may be
-            null, so it's value cannot be checked.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.ExpectedException">
-            <summary>
-             Gets the expected exception Type
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.ExpectedExceptionName">
-            <summary>
-            Gets the FullName of the expected exception
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.TestName">
-            <summary>
-            Gets the name to be used for the test
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Description">
-            <summary>
-            Gets the description of the test
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Ignored">
-            <summary>
-            Gets a value indicating whether this <see cref="T:NUnit.Framework.ITestCaseData"/> is ignored.
-            </summary>
-            <value><c>true</c> if ignored; otherwise, <c>false</c>.</value>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Explicit">
-            <summary>
-            Gets a value indicating whether this <see cref="T:NUnit.Framework.ITestCaseData"/> is explicit.
-            </summary>
-            <value><c>true</c> if explicit; otherwise, <c>false</c>.</value>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.IgnoreReason">
-            <summary>
-            Gets the ignore reason.
-            </summary>
-            <value>The ignore reason.</value>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object[])">
-            <summary>
-            Construct a TestCaseAttribute with a list of arguments.
-            This constructor is not CLS-Compliant
-            </summary>
-            <param name="arguments"></param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object)">
-            <summary>
-            Construct a TestCaseAttribute with a single argument
-            </summary>
-            <param name="arg"></param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object)">
-            <summary>
-            Construct a TestCaseAttribute with a two arguments
-            </summary>
-            <param name="arg1"></param>
-            <param name="arg2"></param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object,System.Object)">
-            <summary>
-            Construct a TestCaseAttribute with a three arguments
-            </summary>
-            <param name="arg1"></param>
-            <param name="arg2"></param>
-            <param name="arg3"></param>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Arguments">
-            <summary>
-            Gets the list of arguments to a test case
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Result">
-            <summary>
-            Gets or sets the expected result. Use
-            ExpectedResult by preference.
-            </summary>
-            <value>The result.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedResult">
-            <summary>
-            Gets or sets the expected result.
-            </summary>
-            <value>The result.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.HasExpectedResult">
-            <summary>
-            Gets a flag indicating whether an expected
-            result has been set.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Categories">
-            <summary>
-            Gets a list of categories associated with this test;
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Category">
-            <summary>
-            Gets or sets the category associated with this test.
-            May be a single category or a comma-separated list.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedException">
-            <summary>
-            Gets or sets the expected exception.
-            </summary>
-            <value>The expected exception.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedExceptionName">
-            <summary>
-            Gets or sets the name the expected exception.
-            </summary>
-            <value>The expected name of the exception.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedMessage">
-            <summary>
-            Gets or sets the expected message of the expected exception
-            </summary>
-            <value>The expected message of the exception.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.MatchType">
-            <summary>
-             Gets or sets the type of match to be performed on the expected message
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Description">
-            <summary>
-            Gets or sets the description.
-            </summary>
-            <value>The description.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.TestName">
-            <summary>
-            Gets or sets the name of the test.
-            </summary>
-            <value>The name of the test.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Ignore">
-            <summary>
-            Gets or sets the ignored status of the test
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Ignored">
-            <summary>
-            Gets or sets the ignored status of the test
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Explicit">
-            <summary>
-            Gets or sets the explicit status of the test
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Reason">
-            <summary>
-            Gets or sets the reason for not running the test
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.IgnoreReason">
-            <summary>
-            Gets or sets the reason for not running the test.
-            Set has the side effect of marking the test as ignored.
-            </summary>
-            <value>The ignore reason.</value>
-        </member>
-        <member name="T:NUnit.Framework.TestCaseSourceAttribute">
-            <summary>
-            FactoryAttribute indicates the source to be used to
-            provide test cases for a test method.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.String)">
-            <summary>
-            Construct with the name of the data source, which must
-            be a property, field or method of the test class itself.
-            </summary>
-            <param name="sourceName">An array of the names of the factories that will provide data</param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.Type)">
-            <summary>
-            Construct with a Type, which must implement IEnumerable
-            </summary>
-            <param name="sourceType">The Type that will provide data</param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.Type,System.String)">
-            <summary>
-            Construct with a Type and name.
-            that don't support params arrays.
-            </summary>
-            <param name="sourceType">The Type that will provide data</param>
-            <param name="sourceName">The name of the method, property or field that will provide data</param>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceName">
-            <summary>
-            The name of a the method, property or fiend to be used as a source
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceType">
-            <summary>
-            A Type to be used as a source
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseSourceAttribute.Category">
-            <summary>
-            Gets or sets the category associated with this test.
-            May be a single category or a comma-separated list.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestFixtureAttribute">
-            <example>
-            [TestFixture]
-            public class ExampleClass 
-            {}
-            </example>
-        </member>
-        <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor">
-            <summary>
-            Default constructor
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor(System.Object[])">
-            <summary>
-            Construct with a object[] representing a set of arguments. 
-            In .NET 2.0, the arguments may later be separated into
-            type arguments and constructor arguments.
-            </summary>
-            <param name="arguments"></param>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.Description">
-            <summary>
-            Descriptive text for this fixture
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.Category">
-            <summary>
-            Gets and sets the category for this fixture.
-            May be a comma-separated list of categories.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.Categories">
-            <summary>
-            Gets a list of categories for this fixture
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.Arguments">
-            <summary>
-            The arguments originally provided to the attribute
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.Ignore">
-            <summary>
-            Gets or sets a value indicating whether this <see cref="T:NUnit.Framework.TestFixtureAttribute"/> should be ignored.
-            </summary>
-            <value><c>true</c> if ignore; otherwise, <c>false</c>.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.IgnoreReason">
-            <summary>
-            Gets or sets the ignore reason. May set Ignored as a side effect.
-            </summary>
-            <value>The ignore reason.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.TypeArgs">
-            <summary>
-            Get or set the type arguments. If not set
-            explicitly, any leading arguments that are
-            Types are taken as type arguments.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestFixtureSetUpAttribute">
-            <summary>
-            Attribute used to identify a method that is 
-            called before any tests in a fixture are run.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestFixtureTearDownAttribute">
-            <summary>
-            Attribute used to identify a method that is called after
-            all the tests in a fixture have run. The method is 
-            guaranteed to be called, even if an exception is thrown.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.TheoryAttribute">
-            <summary>
-            Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/> 
-            class makes the method callable from the NUnit test runner. There is a property 
-            called Description which is optional which you can provide a more detailed test
-            description. This class cannot be inherited.
-            </summary>
-            
-            <example>
-            [TestFixture]
-            public class Fixture
-            {
-              [Test]
-              public void MethodToTest()
-              {}
-              
-              [Test(Description = "more detailed description")]
-              publc void TestDescriptionMethod()
-              {}
-            }
-            </example>
-            
-        </member>
-        <member name="T:NUnit.Framework.TimeoutAttribute">
-            <summary>
-            Used on a method, marks the test with a timeout value in milliseconds. 
-            The test will be run in a separate thread and is cancelled if the timeout 
-            is exceeded. Used on a method or assembly, sets the default timeout 
-            for all contained test methods.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.TimeoutAttribute.#ctor(System.Int32)">
-            <summary>
-            Construct a TimeoutAttribute given a time in milliseconds
-            </summary>
-            <param name="timeout">The timeout value in milliseconds</param>
-        </member>
-        <member name="T:NUnit.Framework.RequiresSTAAttribute">
-            <summary>
-            Marks a test that must run in the STA, causing it
-            to run in a separate thread if necessary.
-            
-            On methods, you may also use STAThreadAttribute
-            to serve the same purpose.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiresSTAAttribute.#ctor">
-            <summary>
-            Construct a RequiresSTAAttribute
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.RequiresMTAAttribute">
-            <summary>
-            Marks a test that must run in the MTA, causing it
-            to run in a separate thread if necessary.
-            
-            On methods, you may also use MTAThreadAttribute
-            to serve the same purpose.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiresMTAAttribute.#ctor">
-            <summary>
-            Construct a RequiresMTAAttribute
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.RequiresThreadAttribute">
-            <summary>
-            Marks a test that must run on a separate thread.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor">
-            <summary>
-            Construct a RequiresThreadAttribute
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor(System.Threading.ApartmentState)">
-            <summary>
-            Construct a RequiresThreadAttribute, specifying the apartment
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.ValueSourceAttribute">
-            <summary>
-            ValueSourceAttribute indicates the source to be used to
-            provide data for one parameter of a test method.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.String)">
-            <summary>
-            Construct with the name of the factory - for use with languages
-            that don't support params arrays.
-            </summary>
-            <param name="sourceName">The name of the data source to be used</param>
-        </member>
-        <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.Type,System.String)">
-            <summary>
-            Construct with a Type and name - for use with languages
-            that don't support params arrays.
-            </summary>
-            <param name="sourceType">The Type that will provide data</param>
-            <param name="sourceName">The name of the method, property or field that will provide data</param>
-        </member>
-        <member name="P:NUnit.Framework.ValueSourceAttribute.SourceName">
-            <summary>
-            The name of a the method, property or fiend to be used as a source
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.ValueSourceAttribute.SourceType">
-            <summary>
-            A Type to be used as a source
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.AttributeExistsConstraint">
-            <summary>
-            AttributeExistsConstraint tests for the presence of a
-            specified attribute on  a Type.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.Constraint">
-            <summary>
-            The Constraint class is the base of all built-in constraints
-            within NUnit. It provides the operator overloads used to combine 
-            constraints.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.IResolveConstraint">
-            <summary>
-            The IConstraintExpression interface is implemented by all
-            complete and resolvable constraints and expressions.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.IResolveConstraint.Resolve">
-            <summary>
-            Return the top-level constraint for this expression
-            </summary>
-            <returns></returns>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.UNSET">
-            <summary>
-            Static UnsetObject used to detect derived constraints
-            failing to set the actual value.
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.actual">
-            <summary>
-            The actual value being tested against a constraint
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.displayName">
-            <summary>
-            The display name of this Constraint for use by ToString()
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.argcnt">
-            <summary>
-            Argument fields used by ToString();
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.builder">
-            <summary>
-            The builder holding this constraint
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor">
-            <summary>
-            Construct a constraint with no arguments
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object)">
-            <summary>
-            Construct a constraint with one argument
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object,System.Object)">
-            <summary>
-            Construct a constraint with two arguments
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.SetBuilder(NUnit.Framework.Constraints.ConstraintBuilder)">
-            <summary>
-            Sets the ConstraintBuilder holding this constraint
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.WriteMessageTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write the failure message to the MessageWriter provided
-            as an argument. The default implementation simply passes
-            the constraint and the actual value to the writer, which
-            then displays the constraint description and the value.
-            
-            Constraints that need to provide additional details,
-            such as where the error occured can override this.
-            </summary>
-            <param name="writer">The MessageWriter on which to display the message</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(System.Object)">
-            <summary>
-            Test whether the constraint is satisfied by a given value
-            </summary>
-            <param name="actual">The value to be tested</param>
-            <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(NUnit.Framework.Constraints.ActualValueDelegate)">
-            <summary>
-            Test whether the constraint is satisfied by an
-            ActualValueDelegate that returns the value to be tested.
-            The default implementation simply evaluates the delegate
-            but derived classes may override it to provide for delayed 
-            processing.
-            </summary>
-            <param name="del">An ActualValueDelegate</param>
-            <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.Matches``1(``0@)">
-            <summary>
-            Test whether the constraint is satisfied by a given reference.
-            The default implementation simply dereferences the value but
-            derived classes may override it to provide for delayed processing.
-            </summary>
-            <param name="actual">A reference to the value to be tested</param>
-            <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write the constraint description to a MessageWriter
-            </summary>
-            <param name="writer">The writer on which the description is displayed</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write the actual value for a failing constraint test to a
-            MessageWriter. The default implementation simply writes
-            the raw value of actual, leaving it to the writer to
-            perform any formatting.
-            </summary>
-            <param name="writer">The writer on which the actual value is displayed</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.ToString">
-            <summary>
-            Default override of ToString returns the constraint DisplayName
-            followed by any arguments within angle brackets.
-            </summary>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.GetStringRepresentation">
-            <summary>
-            Returns the string representation of this constraint
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseAnd(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
-            <summary>
-            This operator creates a constraint that is satisfied only if both 
-            argument constraints are satisfied.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseOr(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
-            <summary>
-            This operator creates a constraint that is satisfied if either 
-            of the argument constraints is satisfied.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.op_LogicalNot(NUnit.Framework.Constraints.Constraint)">
-            <summary>
-            This operator creates a constraint that is satisfied if the 
-            argument constraint is not satisfied.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32)">
-            <summary>
-            Returns a DelayedConstraint with the specified delay time.
-            </summary>
-            <param name="delayInMilliseconds">The delay in milliseconds.</param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32,System.Int32)">
-            <summary>
-            Returns a DelayedConstraint with the specified delay time
-            and polling interval.
-            </summary>
-            <param name="delayInMilliseconds">The delay in milliseconds.</param>
-            <param name="pollingInterval">The interval at which to test the constraint.</param>
-            <returns></returns>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.Constraint.DisplayName">
-            <summary>
-            The display name of this Constraint for use by ToString().
-            The default value is the name of the constraint with
-            trailing "Constraint" removed. Derived classes may set
-            this to another name in their constructors.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.Constraint.And">
-            <summary>
-            Returns a ConstraintExpression by appending And
-            to the current constraint.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.Constraint.With">
-            <summary>
-            Returns a ConstraintExpression by appending And
-            to the current constraint.
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.Constraint.Or">
-            <summary>
-            Returns a ConstraintExpression by appending Or
-            to the current constraint.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.Constraint.UnsetObject">
-            <summary>
-            Class used to detect any derived constraints
-            that fail to set the actual value in their
-            Matches override.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.#ctor(System.Type)">
-            <summary>
-            Constructs an AttributeExistsConstraint for a specific attribute Type
-            </summary>
-            <param name="type"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.Matches(System.Object)">
-            <summary>
-            Tests whether the object provides the expected attribute.
-            </summary>
-            <param name="actual">A Type, MethodInfo, or other ICustomAttributeProvider</param>
-            <returns>True if the expected attribute is present, otherwise false</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Writes the description of the constraint to the specified writer
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.AttributeConstraint">
-            <summary>
-            AttributeConstraint tests that a specified attribute is present
-            on a Type or other provider and that the value of the attribute
-            satisfies some other constraint.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.PrefixConstraint">
-            <summary>
-            Abstract base class used for prefixes
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.PrefixConstraint.baseConstraint">
-            <summary>
-            The base constraint
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.PrefixConstraint.#ctor(NUnit.Framework.Constraints.IResolveConstraint)">
-            <summary>
-            Construct given a base constraint
-            </summary>
-            <param name="resolvable"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.#ctor(System.Type,NUnit.Framework.Constraints.Constraint)">
-            <summary>
-            Constructs an AttributeConstraint for a specified attriute
-            Type and base constraint.
-            </summary>
-            <param name="type"></param>
-            <param name="baseConstraint"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.Matches(System.Object)">
-            <summary>
-            Determines whether the Type or other provider has the 
-            expected attribute and if its value matches the
-            additional constraint specified.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Writes a description of the attribute to the specified writer.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Writes the actual value supplied to the specified writer.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.GetStringRepresentation">
-            <summary>
-            Returns a string representation of the constraint.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.BasicConstraint">
-            <summary>
-            BasicConstraint is the abstract base for constraints that
-            perform a simple comparison to a constant value.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.BasicConstraint.#ctor(System.Object,System.String)">
-            <summary>
-            Initializes a new instance of the <see cref="T:BasicConstraint"/> class.
-            </summary>
-            <param name="expected">The expected.</param>
-            <param name="description">The description.</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.BasicConstraint.Matches(System.Object)">
-            <summary>
-            Test whether the constraint is satisfied by a given value
-            </summary>
-            <param name="actual">The value to be tested</param>
-            <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.BasicConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write the constraint description to a MessageWriter
-            </summary>
-            <param name="writer">The writer on which the description is displayed</param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.NullConstraint">
-            <summary>
-            NullConstraint tests that the actual value is null
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.NullConstraint.#ctor">
-            <summary>
-            Initializes a new instance of the <see cref="T:NullConstraint"/> class.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.TrueConstraint">
-            <summary>
-            TrueConstraint tests that the actual value is true
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.TrueConstraint.#ctor">
-            <summary>
-            Initializes a new instance of the <see cref="T:TrueConstraint"/> class.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.FalseConstraint">
-            <summary>
-            FalseConstraint tests that the actual value is false
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.FalseConstraint.#ctor">
-            <summary>
-            Initializes a new instance of the <see cref="T:FalseConstraint"/> class.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.NaNConstraint">
-            <summary>
-            NaNConstraint tests that the actual value is a double or float NaN
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.NaNConstraint.Matches(System.Object)">
-            <summary>
-            Test that the actual value is an NaN
-            </summary>
-            <param name="actual"></param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.NaNConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write the constraint description to a specified writer
-            </summary>
-            <param name="writer"></param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.BinaryConstraint">
-            <summary>
-            BinaryConstraint is the abstract base of all constraints
-            that combine two other constraints in some fashion.
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.BinaryConstraint.left">
-            <summary>
-            The first constraint being combined
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.BinaryConstraint.right">
-            <summary>
-            The second constraint being combined
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.BinaryConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
-            <summary>
-            Construct a BinaryConstraint from two other constraints
-            </summary>
-            <param name="left">The first constraint</param>
-            <param name="right">The second constraint</param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.AndConstraint">
-            <summary>
-            AndConstraint succeeds only if both members succeed.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AndConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
-            <summary>
-            Create an AndConstraint from two other constraints
-            </summary>
-            <param name="left">The first constraint</param>
-            <param name="right">The second constraint</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AndConstraint.Matches(System.Object)">
-            <summary>
-            Apply both member constraints to an actual value, succeeding 
-            succeeding only if both of them succeed.
-            </summary>
-            <param name="actual">The actual value</param>
-            <returns>True if the constraints both succeeded</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write a description for this contraint to a MessageWriter
-            </summary>
-            <param name="writer">The MessageWriter to receive the description</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write the actual value for a failing constraint test to a
-            MessageWriter. The default implementation simply writes
-            the raw value of actual, leaving it to the writer to
-            perform any formatting.
-            </summary>
-            <param name="writer">The writer on which the actual value is displayed</param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.OrConstraint">
-            <summary>
-            OrConstraint succeeds if either member succeeds
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.OrConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
-            <summary>
-            Create an OrConstraint from two other constraints
-            </summary>
-            <param name="left">The first constraint</param>
-            <param name="right">The second constraint</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.OrConstraint.Matches(System.Object)">
-            <summary>
-            Apply the member constraints to an actual value, succeeding 
-            succeeding as soon as one of them succeeds.
-            </summary>
-            <param name="actual">The actual value</param>
-            <returns>True if either constraint succeeded</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.OrConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write a description for this contraint to a MessageWriter
-            </summary>
-            <param name="writer">The MessageWriter to receive the description</param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionConstraint">
-            <summary>
-            CollectionConstraint is the abstract base class for
-            constraints that operate on collections.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor">
-            <summary>
-            Construct an empty CollectionConstraint
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor(System.Object)">
-            <summary>
-            Construct a CollectionConstraint
-            </summary>
-            <param name="arg"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.IsEmpty(System.Collections.IEnumerable)">
-            <summary>
-            Determines whether the specified enumerable is empty.
-            </summary>
-            <param name="enumerable">The enumerable.</param>
-            <returns>
-            	<c>true</c> if the specified enumerable is empty; otherwise, <c>false</c>.
-            </returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.Matches(System.Object)">
-            <summary>
-            Test whether the constraint is satisfied by a given value
-            </summary>
-            <param name="actual">The value to be tested</param>
-            <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.doMatch(System.Collections.IEnumerable)">
-            <summary>
-            Protected method to be implemented by derived classes
-            </summary>
-            <param name="collection"></param>
-            <returns></returns>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionItemsEqualConstraint">
-            <summary>
-            CollectionItemsEqualConstraint is the abstract base class for all
-            collection constraints that apply some notion of item equality
-            as a part of their operation.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor">
-            <summary>
-            Construct an empty CollectionConstraint
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor(System.Object)">
-            <summary>
-            Construct a CollectionConstraint
-            </summary>
-            <param name="arg"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using(System.Collections.IComparer)">
-            <summary>
-            Flag the constraint to use the supplied IComparer object.
-            </summary>
-            <param name="comparer">The IComparer object to use.</param>
-            <returns>Self.</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using``1(System.Collections.Generic.IComparer{``0})">
-            <summary>
-            Flag the constraint to use the supplied IComparer object.
-            </summary>
-            <param name="comparer">The IComparer object to use.</param>
-            <returns>Self.</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using``1(System.Comparison{``0})">
-            <summary>
-            Flag the constraint to use the supplied Comparison object.
-            </summary>
-            <param name="comparer">The IComparer object to use.</param>
-            <returns>Self.</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using(System.Collections.IEqualityComparer)">
-            <summary>
-            Flag the constraint to use the supplied IEqualityComparer object.
-            </summary>
-            <param name="comparer">The IComparer object to use.</param>
-            <returns>Self.</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using``1(System.Collections.Generic.IEqualityComparer{``0})">
-            <summary>
-            Flag the constraint to use the supplied IEqualityComparer object.
-            </summary>
-            <param name="comparer">The IComparer object to use.</param>
-            <returns>Self.</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.ItemsEqual(System.Object,System.Object)">
-            <summary>
-            Compares two collection members for equality
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Tally(System.Collections.IEnumerable)">
-            <summary>
-            Return a new CollectionTally for use in making tests
-            </summary>
-            <param name="c">The collection to be included in the tally</param>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.IgnoreCase">
-            <summary>
-            Flag the constraint to ignore case and return self.
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.EmptyCollectionConstraint">
-            <summary>
-            EmptyCollectionConstraint tests whether a collection is empty. 
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.EmptyCollectionConstraint.doMatch(System.Collections.IEnumerable)">
-            <summary>
-            Check that the collection is empty
-            </summary>
-            <param name="collection"></param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.EmptyCollectionConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write the constraint description to a MessageWriter
-            </summary>
-            <param name="writer"></param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.UniqueItemsConstraint">
-            <summary>
-            UniqueItemsConstraint tests whether all the items in a 
-            collection are unique.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.UniqueItemsConstraint.doMatch(System.Collections.IEnumerable)">
-            <summary>
-            Check that all items are unique.
-            </summary>
-            <param name="actual"></param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.UniqueItemsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write a description of this constraint to a MessageWriter
-            </summary>
-            <param name="writer"></param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionContainsConstraint">
-            <summary>
-            CollectionContainsConstraint is used to test whether a collection
-            contains an expected object as a member.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.#ctor(System.Object)">
-            <summary>
-            Construct a CollectionContainsConstraint
-            </summary>
-            <param name="expected"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.doMatch(System.Collections.IEnumerable)">
-            <summary>
-            Test whether the expected item is contained in the collection
-            </summary>
-            <param name="actual"></param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write a descripton of the constraint to a MessageWriter
-            </summary>
-            <param name="writer"></param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionEquivalentConstraint">
-            <summary>
-            CollectionEquivalentCOnstraint is used to determine whether two
-            collections are equivalent.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.#ctor(System.Collections.IEnumerable)">
-            <summary>
-            Construct a CollectionEquivalentConstraint
-            </summary>
-            <param name="expected"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.doMatch(System.Collections.IEnumerable)">
-            <summary>
-            Test whether two collections are equivalent
-            </summary>
-            <param name="actual"></param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write a description of this constraint to a MessageWriter
-            </summary>
-            <param name="writer"></param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionSubsetConstraint">
-            <summary>
-            CollectionSubsetConstraint is used to determine whether
-            one collection is a subset of another
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.#ctor(System.Collections.IEnumerable)">
-            <summary>
-            Construct a CollectionSubsetConstraint
-            </summary>
-            <param name="expected">The collection that the actual value is expected to be a subset of</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.doMatch(System.Collections.IEnumerable)">
-            <summary>
-            Test whether the actual collection is a subset of 
-            the expected collection provided.
-            </summary>
-            <param name="actual"></param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write a description of this constraint to a MessageWriter
-            </summary>
-            <param name="writer"></param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionOrderedConstraint">
-            <summary>
-            CollectionOrderedConstraint is used to test whether a collection is ordered.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.#ctor">
-            <summary>
-            Construct a CollectionOrderedConstraint
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.Using(System.Collections.IComparer)">
-            <summary>
-            Modifies the constraint to use an IComparer and returns self.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.Using``1(System.Collections.Generic.IComparer{``0})">
-            <summary>
-            Modifies the constraint to use an IComparer&lt;T&gt; and returns self.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.Using``1(System.Comparison{``0})">
-            <summary>
-            Modifies the constraint to use a Comparison&lt;T&gt; and returns self.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.By(System.String)">
-            <summary>
-            Modifies the constraint to test ordering by the value of
-            a specified property and returns self.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.doMatch(System.Collections.IEnumerable)">
-            <summary>
-            Test whether the collection is ordered
-            </summary>
-            <param name="actual"></param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
-            <summary>
-            Write a description of the constraint to a MessageWriter
-            </summary>
-            <param name="writer"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.GetStringRepresentation">
-            <summary>
-            Returns the string representation of the constraint.
-            </summary>
-            <returns></returns>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.CollectionOrderedConstraint.Descending">
-            <summary>
-             If used performs a reverse comparison
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionTally">
-            <summary>
-            CollectionTally counts (tallies) the number of
-            occurences of each object in one or more enumerations.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionTally.#ctor(NUnit.Framework.Constraints.NUnitEqualityComparer,System.Collections.IEnumerable)">
-            <summary>
-            Construct a CollectionTally object from a comparer and a collection
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionTally.TryRemove(System.Object)">
-            <summary>
-            Try to remove an object from the tally
-            </summary>
-            <param name="o">The object to remove</param>
-            <returns>True if successful, false if the object was not found</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionTally.TryRemove(System.Collections.IEnumerable)">
-            <summary>
-            Try to remove a set of objects from the tally
-            </summary>
-            <param name="c">The objects to remove</param>
-            <returns>True if successful, false if any object was not found</returns>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.CollectionTally.Count">
-            <summary>
-            The number of objects remaining in the tally
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.ComparisonAdapter">
-            <summary>
-            ComparisonAdapter class centralizes all comparisons of
-            values in NUnit, adapting to the use of any provided
-            IComparer, IComparer&lt;T&gt; or Comparison&lt;T&gt;
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.For(System.Collections.IComparer)">
-            <summary>
-            Returns a ComparisonAdapter that wraps an IComparer
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.For``1(System.Collections.Generic.IComparer{``0})">
-            <summary>
-            Returns a ComparisonAdapter that wraps an IComparer&lt;T&gt;
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.For``1(System.Comparison{``0})">
-            <summary>
-            Returns a ComparisonAdapter that wraps a Comparison&lt;T&gt;
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.Compare(System.Object,System.Object)">
-            <summary>
-            Compares two objects
-            </summary>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.ComparisonAdapter.Default">
-            <summary>
-            Gets the default ComparisonAdapter, which wraps an
-            NUnitComparer object.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter.#ctor(System.Collections.IComparer)">
-            <summary>
-            Construct a ComparisonAdapter for an IComparer
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter.Compare(System.Object,System.Object)">
-            <summary>
-            Compares two objects
-            </summary>
-            <param name="expected"></param>
-            <param name="actual"></param>
-            <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.DefaultComparisonAdapter.#ctor">
-            <summary>
-            Construct a default ComparisonAdapter
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter`1">
-            <summary>
-            ComparisonAdapter&lt;T&gt; extends ComparisonAdapter and
-            allows use of an IComparer&lt;T&gt; or Comparison&lt;T&gt;
-            to actually perform the comparison.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter`1.#ctor(System.Collections.Generic.IComparer{`0})">
-            <summary>
-            Construct a ComparisonAdapter for an IComparer&lt;T&gt;
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter`1.Compare(System.Object,System.Object)">
-            <summary>
-            Compare a Type T to an object
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparisonAdapterForComparison`1.#ctor(System.Comparison{`0})">
-            <summary>
-            Construct a ComparisonAdapter for a Comparison&lt;T&gt;
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparisonAdapterForComparison`1.Compare(System.Object,System.Object)">
-            <summary>
-            Compare a Type T to an object
-            </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.ComparisonConstraint">
-            <summary>
-            Abstract base class for constraints that compare values to
-            determine if one is greater than, equal to or less than
-            the other. This class supplies the Using modifiers.
-            </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.comparer">
-            <summary>
-            ComparisonAdapter to be used in making the comparison
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.#ctor(System.Object)">
-            <summary>
-            Initializes a new instance of the <see cref="T:ComparisonConstraint"/> class.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.#ctor(System.Object,System.Object)">
-            <summary>
-            Initializes a new instance of the <see cref="T:ComparisonConstraint"/> class.
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Using(System.Collections.IComparer)">
-            <summary>
-            Modifies the constraint to use an IComparer and returns self
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Using``1(System.Collections.Generic.IComparer{``0})">
-            <summary>
-            Modifies the constraint to use an IComparer&lt;T&gt; and returns self
-            </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Using``1(System.Comparison{``0})">
-            <summary>
-            Modifies the constraint to use a Comparison&lt;T&gt; and returns self
-            </summary>
-       

<TRUNCATED>

Mime
View raw message