trafficserver-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Eddie <zted...@yahoo.com>
Subject Re: ATS 4.0.1: map rule does not work?
Date Tue, 17 Dec 2013 21:57:34 GMT
Here the records.config I am using. Could someone please help to take a look and see what I
am missing?
I am kind of blocked for upgrading to 4.0.1.

#
#
# Process Records Config File
#
# <RECORD-TYPE> <NAME> <TYPE> <VALUE (till end of line)>
#
#       RECORD-TYPE:    CONFIG, LOCAL
#       NAME:           name of variable
#       TYPE:           INT, STRING, FLOAT
#       VALUE:          Initial value for record
#
#
# *NOTE*: All options covered in this file should be documented in the
#         administration guide or the addendum:
#
#
##############################################################################
#
# System Variables
#
##############################################################################
CONFIG proxy.config.proxy_name STRING test100 
CONFIG proxy.config.config_dir STRING etc/trafficserver
CONFIG proxy.config.proxy_binary_opts STRING -M
CONFIG proxy.config.env_prep STRING example_prep.sh
CONFIG proxy.config.temp_dir STRING /tmp
CONFIG proxy.config.alarm_email STRING tserver
CONFIG proxy.config.syslog_facility STRING LOG_DAEMON
CONFIG proxy.config.output.logfile STRING traffic.out
CONFIG proxy.config.snapshot_dir STRING snapshots
CONFIG proxy.config.system.mmap_max INT 2097152
##############################################################################
#
# Main threads configuration (worker threads). Also see configurations for
# SSL threads, disk I/O threads and task threads in their respective areas.
#
##############################################################################
CONFIG proxy.config.exec_thread.autoconfig INT 1
CONFIG proxy.config.exec_thread.autoconfig.scale FLOAT 1.500000
CONFIG proxy.config.exec_thread.limit INT 2
CONFIG proxy.config.accept_threads INT 1
##############################################################################
#
# Local Manager
#
##############################################################################
CONFIG proxy.config.admin.admin_user STRING admin
CONFIG proxy.config.admin.number_config_bak INT 3
CONFIG proxy.config.admin.user_id STRING tserver
##############################################################################
#
# Process Manager
#
##############################################################################
CONFIG proxy.config.admin.autoconf_port INT 8083
CONFIG proxy.config.process_manager.mgmt_port INT 8084
##############################################################################
#
# In order to only bind a specific IP, use the following config, as in
# the example below. Note - this can contain two addresses, one for IPv4
# sockets and one for IPv6 sockets.
#
##############################################################################
#LOCAL proxy.local.incoming_ip_to_bind STRING 192.168.101.17
#LOCAL proxy.local.incoming_ip_to_bind STRING 192.168.101.17 fc07:192:168:101::17
##############################################################################
#
# Alarm Configuration
#
##############################################################################
   # execute alarm as "<abs_path>/<bin> "<MSG_STRING_FROM_PROXY>""
CONFIG proxy.config.alarm.bin STRING example_alarm_bin.sh
CONFIG proxy.config.alarm.abs_path STRING NULL
##############################################################################
#
# HTTP Engine
#
##############################################################################
   ##########
   # basics #
   ##########
   # The server ports are listed here. These are separated by spaces or commas.
   # Each port is a colon separated list of values, which must include a
   # port number. Other options are
   # ipv4 - Use IPv4 (default)
   # ipv6 - Use IPv6
   # tr-in - Transparent inbound.
   # tr-out - Transparent outbound.
   # tr-full - Fully transparent (inbound and outbound).
   # ssl - SSL terminated port.
   # blind - Blind tunnel port.
   # ip-in=[addr] - Bind inbound IP address (listen for client).
   # ip-out=[addr] - Bind outbound IP address (connect to origin server).
   #
   # note - address types must agree with each other and the ipv4/ipv6
   # option if specified. IPv6 addresses must be enclosed in brackets.
   # ip-out can be repeated as long as each address is a different family.
   # The '=' is optional.
   #
   # Example: Port 8080 IPv6 inbound transparent, and port 80 IPv4
   # "8080:ipv6:tr-in 80"
CONFIG proxy.config.http.server_ports STRING 80
   # Ports on the origin server to which a blind tunnel may connect.
CONFIG proxy.config.http.connect_ports STRING 443 563
   # The via settings have four values
   #  0 - Do not modify / set this via header
   #  1 - Update the via, with normal verbosity
   #  2 - Update the via, with higher verbosity
   #  3 - Update the via, with highest verbosity
CONFIG proxy.config.http.insert_request_via_str INT 1
CONFIG proxy.config.http.insert_response_via_str INT 0
   # Insert a Server: header, this has three values
   #   0 - Don't add or modify the Server: header
   #   1 - Add a Server: header
   #   2 - Only add a Server: header if one doesn't exist already
CONFIG proxy.config.http.response_server_enabled INT 1
CONFIG proxy.config.http.insert_age_in_response INT 1
CONFIG proxy.config.http.enable_url_expandomatic INT 0
CONFIG proxy.config.http.no_dns_just_forward_to_parent INT 0
CONFIG proxy.config.http.uncacheable_requests_bypass_parent INT 1
CONFIG proxy.config.http.keep_alive_enabled_in INT 0
CONFIG proxy.config.http.keep_alive_enabled_out INT 0
CONFIG proxy.config.http.chunking_enabled INT 1
   # send http11 requests:
   #   0 - Never
   #   1 - Always
   #   2 - if the server has returned http1.1 before
   #   3 - if the client request is 1.1 & the server
   #         has returned 1.1 before
CONFIG proxy.config.http.send_http11_requests INT 1
   # Share server connections
   #  0 - Never
   #  1 - Share, with a single global connection pool
   #  2 - Share, with a connection pool per worker thread
CONFIG proxy.config.http.share_server_sessions INT 2
CONFIG proxy.config.http.origin_server_pipeline INT 1
CONFIG proxy.config.http.user_agent_pipeline INT 8
   ##########################
   # HTTP referer filtering #
   ##########################
CONFIG proxy.config.http.referer_filter INT 0
CONFIG proxy.config.http.referer_format_redirect INT 0
CONFIG proxy.config.http.referer_default_redirect STRING http://www.example.com/
   ##############################
   # parent proxy configuration #
   ##############################
CONFIG proxy.config.http.parent_proxy_routing_enable INT 0
CONFIG proxy.config.http.parent_proxy.retry_time INT 300
   # Parent fail threshold is the number of request that must
   # fail within the retry window for the parent to be marked
   # down
CONFIG proxy.config.http.parent_proxy.fail_threshold INT 10
CONFIG proxy.config.http.parent_proxy.total_connect_attempts INT 4
CONFIG proxy.config.http.parent_proxy.per_parent_connect_attempts INT 2
CONFIG proxy.config.http.parent_proxy.connect_attempts_timeout INT 30
CONFIG proxy.config.http.forward.proxy_auth_to_parent INT 0
   ###################################
   # HTTP connection timeouts (secs) #
   ###################################
   # out: proxy -> origin server connection
   # in : ua -> proxy connection
CONFIG proxy.config.http.keep_alive_no_activity_timeout_in INT 115
CONFIG proxy.config.http.keep_alive_no_activity_timeout_out INT 120
CONFIG proxy.config.http.transaction_no_activity_timeout_in INT 30
CONFIG proxy.config.http.transaction_no_activity_timeout_out INT 30
CONFIG proxy.config.http.transaction_active_timeout_in INT 900
CONFIG proxy.config.http.transaction_active_timeout_out INT 0
CONFIG proxy.config.http.accept_no_activity_timeout INT 120
CONFIG proxy.config.http.background_fill_active_timeout INT 60
CONFIG proxy.config.http.background_fill_completed_threshold FLOAT 0.500000
   ##################################
   # origin server connect attempts #
   ##################################
CONFIG proxy.config.http.connect_attempts_max_retries INT 6
CONFIG proxy.config.http.connect_attempts_max_retries_dead_server INT 3
CONFIG proxy.config.http.connect_attempts_rr_retries INT 3
CONFIG proxy.config.http.connect_attempts_timeout INT 30
CONFIG proxy.config.http.post_connect_attempts_timeout INT 1800
CONFIG proxy.config.http.down_server.cache_time INT 300
CONFIG proxy.config.http.down_server.abort_threshold INT 10
   ##################################
   # congestion control             #
   ##################################
CONFIG proxy.config.http.congestion_control.enabled INT 0
   #############################
   # negative response caching #
   #############################
CONFIG proxy.config.http.negative_caching_enabled INT 0
CONFIG proxy.config.http.negative_caching_lifetime INT 1800
   #########################
   # proxy users variables #
   #########################
CONFIG proxy.config.http.anonymize_remove_from INT 0
CONFIG proxy.config.http.anonymize_remove_referer INT 0
CONFIG proxy.config.http.anonymize_remove_user_agent INT 0
CONFIG proxy.config.http.anonymize_remove_cookie INT 0
CONFIG proxy.config.http.anonymize_remove_client_ip INT 0
CONFIG proxy.config.http.anonymize_insert_client_ip INT 1
CONFIG proxy.config.http.anonymize_other_header_list STRING NULL
CONFIG proxy.config.http.insert_squid_x_forwarded_for INT 1
   ############
   # security #
   ############
CONFIG proxy.config.http.push_method_enabled INT 0
#  ###################################
#  # HTTP Quick filtering (security) #
#  ###################################
#  this functionality is moved to ip_allow.config
   #################
   # cache control #
   #################
CONFIG proxy.config.http.cache.http INT 0
CONFIG proxy.config.http.cache.ignore_client_no_cache INT 1
CONFIG proxy.config.http.cache.ims_on_client_no_cache INT 1
CONFIG proxy.config.http.cache.ignore_server_no_cache INT 0
CONFIG proxy.config.http.cache.ignore_client_cc_max_age INT 0
CONFIG proxy.config.http.normalize_ae_gzip INT 0
   # cache responses to cookies has 5 options:
   #   0 - do not cache any responses to cookies
   #   1 - cache for any content-type
   #   2 - cache only for image types
   #   3 - cache for all but text content-types
   #   4 - cache for all but text content-types except OS response
   #       without "Set-Cookie" or with "Cache-Control: public"
   # See also cache-responses-to-cookies in cache.config.
CONFIG proxy.config.http.cache.cache_responses_to_cookies INT 1
CONFIG proxy.config.http.cache.ignore_authentication INT 0
CONFIG proxy.config.http.cache.cache_urls_that_look_dynamic INT 1
CONFIG proxy.config.http.cache.enable_default_vary_headers INT 0
   #  when_to_revalidate has 5 options:
   #    0 - default. use use cache directives or heuristic
   #    1 - stale if heuristic
   #    2 - always stale (always revalidate)
   #    3 - never stale
   #    4 - always revalidate if request is conditional, else default is used
CONFIG proxy.config.http.cache.when_to_revalidate INT 0
   # Some old MSIE browsers don't send no-cache headers to
   # reverse proxies or transparent caches, this variable controls
   # when to add no-cache headers to MSIE requests:
   #  -1 - no-cache is never added, stats are not updated
   #   0 - default; no-cache not added to MSIE requests
   #   1 - no-cache added to IMS MSIE requests
   #   2 - no-cache added to all MSIE requests
CONFIG proxy.config.http.cache.when_to_add_no_cache_to_msie_requests INT -1
   # required headers: three options:
   #   0 - No required headers to make document cachable
   #   1 - "Last-Modified:", "Expires:", or "Cache-Control: max-age" required
   #   2 - explicit lifetime required, "Expires:" or "Cache-Control: max-age"
CONFIG proxy.config.http.cache.required_headers INT 2
CONFIG proxy.config.http.cache.max_stale_age INT 604800
CONFIG proxy.config.http.cache.range.lookup INT 1
   ########################
   # heuristic expiration #
   ########################
CONFIG proxy.config.http.cache.heuristic_min_lifetime INT 3600
CONFIG proxy.config.http.cache.heuristic_max_lifetime INT 86400
CONFIG proxy.config.http.cache.heuristic_lm_factor FLOAT 0.100000
CONFIG proxy.config.http.cache.fuzz.time INT 240
CONFIG proxy.config.http.cache.fuzz.probability FLOAT 0.005000
   #########################################
   # dynamic content & content negotiation #
   #########################################
CONFIG proxy.config.http.cache.vary_default_text STRING NULL
CONFIG proxy.config.http.cache.vary_default_images STRING NULL
CONFIG proxy.config.http.cache.vary_default_other STRING NULL
   ##############################################################
   # The HTTP stats are expensive, turn off you don't need them #
   ##############################################################
CONFIG proxy.config.http.enable_http_stats INT 1
##############################################################################
#
# Customizable User Response Pages
#
##############################################################################
   # 0 - turn off customizable user response pages
   # 1 - enable customizable user response pages in only the "default" directory
   # 2 - enable language-targeted user response pages
CONFIG proxy.config.body_factory.enable_customizations INT 0
CONFIG proxy.config.body_factory.enable_logging INT 0
   # 0 - never suppress generated responses
   # 1 - always suppress generated responses
   # 2 - suppress responses for intercepted traffic
CONFIG proxy.config.body_factory.response_suppression_mode INT 0
##############################################################################
#
# Net Subsystem
#
##############################################################################
CONFIG proxy.config.net.connections_throttle INT 30000
   # Enable defer accept / accept filtering. On Linux, this is a timeout, sec.
CONFIG proxy.config.net.defer_accept INT 45
##############################################################################
#
# Cluster Subsystem
#
##############################################################################
   # cluster type requires restart to change
   # 1 is full clustering, 2 is mgmt only, 3 is no clustering
LOCAL proxy.local.cluster.type INT 3
CONFIG proxy.config.cluster.cluster_port INT 8086
CONFIG proxy.config.cluster.rsport INT 8088
CONFIG proxy.config.cluster.mcport INT 8089
CONFIG proxy.config.cluster.mc_group_addr STRING 224.0.1.37
CONFIG proxy.config.cluster.mc_ttl INT 1
CONFIG proxy.config.cluster.log_bogus_mc_msgs INT 1
CONFIG proxy.config.cluster.ethernet_interface STRING lo
##############################################################################
#
# Cache
#
##############################################################################
CONFIG proxy.config.cache.permit.pinning INT 0
   # default the ram cache size to AUTO_SIZE (-1) based on cache size
   #   (approximately 1 MB of RAM cache per GB of disk cache)
   # alternatively, set to a fixed value such as 20971520 (20MB)
CONFIG proxy.config.cache.ram_cache.size INT -1
CONFIG proxy.config.cache.ram_cache_cutoff INT 4194304
   # Replacement algorithm
   #  0 : Clocked Least Frequently Used by Size (CLFUS) w/optional compression
   #  1 : LRU w/o optional compression - trivially simple
CONFIG proxy.config.cache.ram_cache.algorithm INT 0
   # Filter inserts into the RAM cache to ensure that they have been seen at
   # least once.  For LRU, this provides scan resistance. Note that CLFUS
   # already requires that a document have history before it is inserted, so
   # for CLFUS, setting this option means that a document must be seen three
   # times before it is added to the RAM cache.
CONFIG proxy.config.cache.ram_cache.use_seen_filter INT 0
   # Compress the content of the ram cache:
   #  0 : no compression
   #  1 : fastlz (extremely fast, relatively low compression)
   #  2 : libz (moderate speed, reasonable compression)
   #  3 : liblzma (very slow, high compression)
   #  NOTE: compression runs on task threads.  To use more cores for
   #  compression, increase proxy.config.task_threads.
CONFIG proxy.config.cache.ram_cache.compress INT 0
   # The maximum number of alternates that are allowed for any given URL.
   # It is not possible to strictly enforce this if the variable
   #   'proxy.config.cache.vary_on_user_agent' is set to 1.
   # The default value for 'proxy.config.cache.vary_on_user_agent' is 0.
   # (0 disables the maximum number of alts check)
CONFIG proxy.config.cache.limits.http.max_alts INT 5
   # The target size of a contiguous fragment on disk.
   # Acceptable values are powers of 2, e.g. 65536, 131072, 262144, 524288, 1048576, 2097152.
   # Larger could waste memory on slow connections, smaller could waste seeks.
CONFIG proxy.config.cache.target_fragment_size INT 1048576
   # The maximum size of a document that will be stored in the cache.
   # (0 disables the maximum document size check)
CONFIG proxy.config.cache.max_doc_size INT 0
   # enable the cache to read from an object while it is being added to the cache
CONFIG proxy.config.cache.enable_read_while_writer INT 0
   # This controls how many objects (average) the disk caches can hold, and
   # how much memory it'll consume for the directory structure.
CONFIG proxy.config.cache.min_average_object_size INT 8000
   # How many I/O threads to allocate per disk (spindle). Be aware that RAID
   # disks would show up to TS as a single spindle.
CONFIG proxy.config.cache.threads_per_disk INT 8
   # Time (in ms) to delay until retrying to acquire a cache lock. Setting
   # this low can reduce latencies in some cases, but can consume more CPU.
   # If you experience CPU spinning, try increasing this setting.
CONFIG proxy.config.cache.mutex_retry_delay INT 2
##############################################################################
#
# DNS
#
##############################################################################
CONFIG proxy.config.dns.search_default_domains INT 0
CONFIG proxy.config.dns.splitDNS.enabled INT 0
CONFIG proxy.config.dns.max_dns_in_flight INT 2048
   # Additional URL expansions for http DNS lookup
CONFIG proxy.config.dns.url_expansions STRING NULL
CONFIG proxy.config.dns.round_robin_nameservers INT 0
CONFIG proxy.config.dns.nameservers STRING NULL
CONFIG proxy.config.dns.resolv_conf STRING /etc/resolv.conf
   # This provides additional resilience against DNS forgery, particularly in
   # forward or transparent proxies, but requires that the resolver populates
   # the queries section of the response properly.
CONFIG proxy.config.dns.validate_query_name INT 0
##############################################################################
#
# HostDB
#
##############################################################################
   # in entries, may not be changed while running
   # note that in order to increase hostdb.size, hostdb.storage_size should
   # also be increase. These are best guesses, you will have to monitor this.
CONFIG proxy.config.hostdb.size INT 120000
CONFIG proxy.config.hostdb.storage_size INT 33554432
   # ttl modes:
   #   0 = obey
   #   1 = ignore
   #   2 = min(X,ttl)
   #   3 = max(X,ttl)
CONFIG proxy.config.hostdb.ttl_mode INT 0
   # in minutes...
CONFIG proxy.config.hostdb.timeout INT 1440
   # round-robin addresses for single clients
   # (can cause authentication problems)
CONFIG proxy.config.hostdb.strict_round_robin INT 0
##############################################################################
#
# Logging Config
#
##############################################################################
   # possible values for logging_enabled:
   #   0: no logging at all
   #   1: log errors only
   #   2: log transactions only
   #   3: full logging (errors + transactions)
CONFIG proxy.config.log.logging_enabled INT 3
CONFIG proxy.config.log.max_secs_per_buffer INT 1
CONFIG proxy.config.log.max_space_mb_for_logs INT 25000
CONFIG proxy.config.log.max_space_mb_for_orphan_logs INT 25
CONFIG proxy.config.log.max_space_mb_headroom INT 1000
CONFIG proxy.config.log.hostname STRING localhost
CONFIG proxy.config.log.logfile_dir STRING var/log/trafficserver
CONFIG proxy.config.log.logfile_perm STRING rw-r--r--
CONFIG proxy.config.log.custom_logs_enabled INT 1
CONFIG proxy.config.log.squid_log_enabled INT 0
CONFIG proxy.config.log.squid_log_is_ascii INT 0
CONFIG proxy.config.log.squid_log_name STRING squid
CONFIG proxy.config.log.squid_log_header STRING NULL
CONFIG proxy.config.log.common_log_enabled INT 0
CONFIG proxy.config.log.common_log_is_ascii INT 1
CONFIG proxy.config.log.common_log_name STRING common
CONFIG proxy.config.log.common_log_header STRING NULL
CONFIG proxy.config.log.extended_log_enabled INT 0
CONFIG proxy.config.log.extended_log_is_ascii INT 0
CONFIG proxy.config.log.extended_log_name STRING extended
CONFIG proxy.config.log.extended_log_header STRING NULL
CONFIG proxy.config.log.extended2_log_enabled INT 0
CONFIG proxy.config.log.extended2_log_is_ascii INT 1
CONFIG proxy.config.log.extended2_log_name STRING extended2
CONFIG proxy.config.log.extended2_log_header STRING NULL
CONFIG proxy.config.log.separate_icp_logs INT 0
CONFIG proxy.config.log.separate_host_logs INT 0
   # Log collation allows you to do "remote logging"
LOCAL proxy.local.log.collation_mode INT 0
CONFIG proxy.config.log.collation_host STRING NULL
CONFIG proxy.config.log.collation_port INT 8085
CONFIG proxy.config.log.collation_secret STRING foobar
CONFIG proxy.config.log.collation_host_tagged INT 0
CONFIG proxy.config.log.collation_retry_sec INT 5
CONFIG proxy.config.log.rolling_enabled INT 1
CONFIG proxy.config.log.rolling_interval_sec INT 86400
CONFIG proxy.config.log.rolling_offset_hr INT 0
CONFIG proxy.config.log.rolling_size_mb INT 10
CONFIG proxy.config.log.auto_delete_rolled_files INT 1
CONFIG proxy.config.log.sampling_frequency INT 1
##############################################################################
#
# Reverse Proxy
#
##############################################################################
CONFIG proxy.config.reverse_proxy.enabled INT 1
CONFIG proxy.config.header.parse.no_host_url_redirect STRING NULL
##############################################################################
#
# URL Remap Rules
#
##############################################################################
CONFIG proxy.config.url_remap.default_to_server_pac INT 0
CONFIG proxy.config.url_remap.default_to_server_pac_port INT -1
   # To enable forward proxy, you must turn off remap_required
CONFIG proxy.config.url_remap.remap_required INT 1
   # Pristine host header is the "original" (request) header. Make sure your
   # origin expects them in reverse proxy.
CONFIG proxy.config.url_remap.pristine_host_hdr INT 1
##############################################################################
#
# SSL Termination
#
##############################################################################
   # proxy.config.ssl.enabled should be:
   #   0 - none
   #   1 - SSL enabled
   # Deprecated. SSL is enabled automatically if an SSL port is configured
   # in config.proxy.http.server_ports.
#CONFIG proxy.config.ssl.enabled INT 0
   # The number of SSL threads is a multiplier of number of CPUs and
   # proxy.config.exec_thread.autoconfig.scale by default. You can
   # override that here (set it to a non-zero value).
CONFIG proxy.config.ssl.number.threads INT 0
   # The following three variables can be
   # set to 0 to disable SSLv2, SSLv3, and/or TLSv1.
   # SSLv2 is disabled by default for security concern.
CONFIG proxy.config.ssl.SSLv2 INT 0
CONFIG proxy.config.ssl.SSLv3 INT 1
CONFIG proxy.config.ssl.TLSv1 INT 1
   # The following two variables control the Cipher Suite traffic Server
   # uses for HTTPS connnections and whether to prefer the client
   # selected (default) or the server selected
   # Our default SSL Cipher Suite tries to be reasonably fast and strong.
CONFIG proxy.config.ssl.server.cipher_suite STRING RC4-SHA:AES128-SHA:DES-CBC3-SHA:AES256-SHA:ALL:!aNULL:!EXP:!LOW:!MD5:!SSLV2:!NULL
CONFIG proxy.config.ssl.server.honor_cipher_order INT 0
   # Control if SSL should perform content compression or not
CONFIG proxy.config.ssl.compression INT 0
   # Deprecated.
   # SSL ports should now be configured via proxy.config.http.server_ports
#CONFIG proxy.config.ssl.server_port INT 443
   # Client certification level should be:
   # 0 no client certificates
   # 1 client certificates optional
   # 2 client certificates required
CONFIG proxy.config.ssl.client.certification_level INT 0
   # Server cert chain filename is the name of the cert chain file
   # for a single cert system.
CONFIG proxy.config.ssl.server.cert_chain.filename STRING NULL
   # This is the path that SSL certificates files are relative to. Certificate
   # names specified in ssl_multicert.config will be located relative to this path.
CONFIG proxy.config.ssl.server.cert.path STRING etc/trafficserver
   # If any private key is not contained in the certificate file, you must
   # fill in the private key path. Private key names specified in
   # ssl_multicert.config will be located relative to this path.
CONFIG proxy.config.ssl.server.private_key.path STRING etc/trafficserver
   # The CA file name and path are the
   # certificate authority certificate that
   # client certificates will be verified against.
CONFIG proxy.config.ssl.CA.cert.filename STRING NULL
CONFIG proxy.config.ssl.CA.cert.path STRING etc/trafficserver
   ################################
   # client related configuration #
   ################################
CONFIG proxy.config.ssl.client.verify.server INT 0
CONFIG proxy.config.ssl.client.cert.filename STRING NULL
CONFIG proxy.config.ssl.client.cert.path STRING etc/trafficserver
   # Fill in private key file and path only if the client's
   # private key is not contained in the client certificate file.
CONFIG proxy.config.ssl.client.private_key.filename STRING NULL
CONFIG proxy.config.ssl.client.private_key.path STRING etc/trafficserver
   # The CA file name and path are the
   # certificate authority certificate that
   # server certificates will be verified against.
CONFIG proxy.config.ssl.client.CA.cert.filename STRING NULL
CONFIG proxy.config.ssl.client.CA.cert.path STRING etc/trafficserver
##############################################################################
#
# ICP Configuration. NOTE! ICP is currently broken NOTE!
#
##############################################################################
   # icp modes
   #   enabled=0 ICP disabled
   #   enabled=1 Allow receive of ICP queries
   #   enabled=2 Allow send/receive of ICP queries
CONFIG proxy.config.icp.enabled INT 0
CONFIG proxy.config.icp.icp_interface STRING NULL
CONFIG proxy.config.icp.icp_port INT 3130
CONFIG proxy.config.icp.multicast_enabled INT 0
CONFIG proxy.config.icp.query_timeout INT 2
##############################################################################
#
# Scheduled Update Configuration
#
##############################################################################
CONFIG proxy.config.update.enabled INT 0
CONFIG proxy.config.update.force INT 0
CONFIG proxy.config.update.retry_count INT 10
CONFIG proxy.config.update.retry_interval INT 2
CONFIG proxy.config.update.concurrent_updates INT 100
##############################################################################
#
# Socket send/recv buffer sizes (0 == don't call setsockopt() )
#
##############################################################################
   # out: proxy -> os connection
   # in : ua -> proxy connection
CONFIG proxy.config.net.sock_send_buffer_size_in INT 262144
CONFIG proxy.config.net.sock_recv_buffer_size_in INT 0
CONFIG proxy.config.net.sock_send_buffer_size_out INT 0
CONFIG proxy.config.net.sock_recv_buffer_size_out INT 0
##############################################################################
#
# User Overridden Configurations Below
#
##############################################################################
CONFIG proxy.config.core_limit INT -1
##############################################################################
#
# Debugging
#
##############################################################################
  # Uses a regular expression to match the debugging topic name, performance
  # will be affected!
CONFIG proxy.config.diags.debug.enabled INT 0
CONFIG proxy.config.diags.debug.tags STRING http.*|dns.*
  # Great for tracking down memory leaks, but you need to use the
  # ink allocators
CONFIG proxy.config.dump_mem_info_frequency INT 0
##############################################################################
#
# Slow Log
#
##############################################################################
  # Log any request that takes more then x number of milliseconds, needs
  # to be > 0 to be enabled
CONFIG proxy.config.http.slow.log.threshold INT 1
##############################################################################
#
# Thread pool for "misc" tasks, plugins etc. 2 is a good minimum.
#
##############################################################################
CONFIG proxy.config.task_threads INT 2
CONFIG proxy.config.url_remap.filename STRING remap.config
CONFIG proxy.config.cluster.cluster_configuration STRING cluster.config
CONFIG proxy.config.log.xml_config_file STRING logs_xml.config



On Tuesday, December 17, 2013 3:56 PM, Eddie <zteddie@yahoo.com> wrote:
 
I am trying to upgrade ATS from 3.2.4 to 4.0.1. I copied the records.config and remap.config,
plus the map rule files from version 3.2.4 server to version 4.0.1  server.
So, everything is same except the ATS versions. However, the map rules are no longer working
any more. Does anyone have any idea?

map http://vehix.com http://vehix.com @plugin=/libexec/trafficserver/regex_remap.so @pparam=/etc/trafficserver/regexmap/vehix.com.reg

But I am getting no response.

curl -svIH "HOST: vehix.xom" http://68.87.98.100
* About to connect() to 68.87.98.100 port 80 (#0)
*   Trying 68.87.98.100...
* connected
* Connected to 68.87.98.100 (68.87.98.100) port 80 (#0)
> HEAD / HTTP/1.1
> User-Agent: curl/7.24.0 (x86_64-apple-darwin12.0) libcurl/7.24.0 OpenSSL/0.9.8y zlib/1.2.5
> Accept: */*
> HOST: vehix.xom
> 
* Empty reply from server
* Connection #0 to host 68.87.98.100 left intact
* Closing connection #0

Does anyone have any clue what I am missing?

Thanks

Eddie
Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message