tomcat-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From fsman...@netscape.net
Subject Re: Tomcat 6.0.32 on 64-bit 2008 server - "Event 1000, Application Error"
Date Thu, 05 May 2011 14:36:03 GMT
Andre:  I followed your idea and did the following - uninstalled the .exe install of 6.0.32,
extracted the 64-bit zip, and copied my old "conf" folder back on top of the one that the
zip created.  Added the environment variable JAVA_HOME in Windows.  Ran startup.bat - Tomcat
tries to start, but Windows then pops up a message saying "Java(TM) Platform SE binary has
stopped working", and I am forced to click "close this program".

Windows still notes an "Event 1000, Application Error" in its logs, and I get the following
error.  The "faulting application" this time is java.exe as opposed to tomcat6.exe (as it
was previously):

Faulting application name: java.exe, version: 6.0.250.6, time stamp: 0x4da6a804
Faulting module name: jvm.dll, version: 20.0.0.11, time stamp: 0x4da6d3c2
Exception code: 0xc0000094
Fault offset: 0x0000000000308eef
Faulting process id: 0xa2c
Faulting application start time: 0x01cc0b2f6534c0ca
Faulting application path: C:\Program Files\Java\jdk1.6.0_25\bin\java.exe
Faulting module path: C:\Program Files\Java\jdk1.6.0_25\jre\bin\server\jvm.dll
Report Id: a2f45f74-7722-11e0-a592-005056a10003

This error is the same (save for the version numbers and path differences) when using JDK
6u24 and 6u25 64-bit.  I don't know if this helps at all, but here is the output from startup.bat
when running with 6u25:
Using CATALINA_BASE:   "c:\Program Files\Apache Software Foundation\Tomcat 6.0"
Using CATALINA_HOME:   "c:\Program Files\Apache Software Foundation\Tomcat 6.0"
Using CATALINA_TMPDIR: "c:\Program Files\Apache Software Foundation\Tomcat 6.0\temp"
Using JRE_HOME:        "C:\Program Files\Java\jdk1.6.0_25"
Using CLASSPATH:       "c:\Program Files\Apache Software Foundation\Tomcat 6.0\bin\bootstrap.jar"

I'm still at a loss here.  Any ideas what this now points to?


(Terence:  Haven't gotten there yet, as it is a new install.  I might end up trying that at
some point - what did you remove from the registry?)



 


A suggestion to try to pin down the problem somewhere : let's run your Tomcat, not as a Windows
Service under the procrun daemon, but as a console application, directly from java. 
(If its a VM under VMware, then you have an easy console access, and you don't care if you
have to login and run tomcat in a command window, right ?) 
 
For that, you'll have to download a "full" tomcat zip-file (from the same place where you
got the .exe).  The zip file contains additional scripts allowing to start tomcat from the
command-line. 
You can unzip it in a new directory, or right over the one that's there. 
(You may want to save the contents of your "conf" sub-directory, and restore them after the
unzip). 
Then you should be able to navigate to the "bin" directory and start tomcat in the command
window (with "startup.bat"), without involving the tomcat6.exe. 
You will probably need to create a "setenv.bat" first, and set JAVA_HOME in it. 
I believe that all that is explained in the "running.txt" file that comes with it. 
 
If tomcat starts and stops consistently that way, then I would say that it is a strong clue
that procrun (tomcat6.exe) has something to do with the problem. 

 

 


 

 

-----Original Message-----
From: André Warnier <aw@ice-sa.com>
To: Tomcat Users List <users@tomcat.apache.org>
Sent: Wed, May 4, 2011 4:07 pm
Subject: Re: Tomcat 6.0.32 on 64-bit 2008 server - "Event 1000, Application Error"


A suggestion to try to pin down the problem somewhere : let's run your Tomcat, not as a Windows
Service under the procrun daemon, but as a console application, directly from java. 
(If its a VM under VMware, then you have an easy console access, and you don't care if you
have to login and run tomcat in a command window, right ?) 
 
For that, you'll have to download a "full" tomcat zip-file (from the same place where you
got the .exe).  The zip file contains additional scripts allowing to start tomcat from the
command-line. 
You can unzip it in a new directory, or right over the one that's there. 
(You may want to save the contents of your "conf" sub-directory, and restore them after the
unzip). 
Then you should be able to navigate to the "bin" directory and start tomcat in the command
window (with "startup.bat"), without involving the tomcat6.exe. 
You will probably need to create a "setenv.bat" first, and set JAVA_HOME in it. 
I believe that all that is explained in the "running.txt" file that comes with it. 
 
If tomcat starts and stops consistently that way, then I would say that it is a strong clue
that procrun (tomcat6.exe) has something to do with the problem. 
 
 
fsmaniac@netscape.net wrote: 
> Chuck:  Before I encountered this, I had "Maximum memory pool" at 2048 (and -XX:MaxPermSize=256m),
as that's what the app I am looking to install wants.  It worked fine then, but after the
stop/start, failed.  When Tomcat decided to finally come back to life earlier today after
a power down and a cold boot, I didn't set the heap size/MaxPermSize at all.  When I touched
the config and restarted, it died again.  Apparently whatever it is gets unstable after a
while. 
> >  > >  Stefan:  Haven't thought of that yet, though we have VM's on the same
host running Win2k3 + Tomcat without a problem. 
> > Thank you to everyone that has contributed so far... 
> > >  > >  > > -----Original Message----- 
> From: Caldarale, Charles R <Chuck.Caldarale@unisys.com> 
> To: Tomcat Users List <users@tomcat.apache.org> 
> Sent: Wed, May 4, 2011 1:46 pm 
> Subject: RE: Tomcat 6.0.32 on 64-bit 2008 server - "Event 1000, Application Error" 
> > >> From: fsmaniac@netscape.net [mailto:fsmaniac@netscape.net] >> Subject:
Re: Tomcat 6.0.32 on 64-bit 2008 server - "Event 1000, Application > Error" 
> >> Faulting module name: jvm.dll, version: 20.0.0.11, time stamp: 0x4da6d3c2 
>> Exception code: 0xc0000094 
>> Fault offset: 0x0000000000308eef 
> > That appears to be a divide fault.  Check your options (especially heap sizes) >
in the tomcat6w.exe window to make sure that they make sense. 
> >  - Chuck 
> > > THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY >
MATERIAL and is thus for use only by the intended recipient. If you received > this in
error, please contact the sender and delete the e-mail and its > attachments from all computers.

> > > --------------------------------------------------------------------- 
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org 
> For additional commands, e-mail: users-help@tomcat.apache.org 
> >  > >  
--------------------------------------------------------------------- 
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org 
For additional commands, e-mail: users-help@tomcat.apache.org 
 

 

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message