David
#rpm -qa *sun-compat*
java-1.4.2-sun-compat-1.4.2.10-1jpp
As you can see the compat rpm is installed.
Assaf
David Smith wrote:
> These messages make me think you are trying to run tomcat 5.5 on a
> 1.4.x JVM. If so, download and install the compat package and install
> it. It's on the same page as the other tomcat release downloads.
>
> --David
>
> Assaf Flatto wrote:
>
>> hello
>>
>> found the problem and fixed it , but now i have another issue :
>> when i start it with the minimal server.xml it comes up fine , but wen
>> i add my servr.xml :
>> <!-- Example Server Configuration File -->
>> <!-- Note that component elements are nested corresponding to their
>> parent-child relationships with each other -->
>>
>> <!-- A "Server" is a singleton element that represents the entire JVM,
>> which may contain one or more "Service" instances. The Server
>> listens for a shutdown command on the indicated port.
>>
>> Note: A "Server" is not itself a "Container", so you may not
>> define subcomponents such as "Valves" or "Loggers" at this level.
>> -->
>>
>> <Server port="8005" shutdown="SHUTDOWN">
>>
>> <!-- Comment these entries out to disable JMX MBeans support used
>> for the
>> administration web application -->
>> <Listener className="org.apache.catalina.core.AprLifecycleListener" />
>> <Listener
>> className="org.apache.catalina.mbeans.ServerLifecycleListener" />
>> <Listener
>> className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
>> />
>> <Listener
>> className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
>>
>>
>> <!-- Global JNDI resources -->
>> <GlobalNamingResources>
>>
>> <!-- Test entry for demonstration purposes -->
>> <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
>>
>> <!-- Editable user database that can also be used by
>> UserDatabaseRealm to authenticate users -->
>> <Resource name="UserDatabase" auth="Container"
>> type="org.apache.catalina.UserDatabase"
>> description="User database that can be updated and saved"
>> factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
>> pathname="conf/tomcat-users.xml" />
>>
>> </GlobalNamingResources>
>>
>> <!-- A "Service" is a collection of one or more "Connectors" that share
>> a single "Container" (and therefore the web applications visible
>> within that Container). Normally, that Container is an "Engine",
>> but this is not required.
>>
>> Note: A "Service" is not itself a "Container", so you may not
>> define subcomponents such as "Valves" or "Loggers" at this level.
>> -->
>>
>> <!-- Define the Tomcat Stand-Alone Service -->
>> <Service name="Catalina">
>>
>> <!-- A "Connector" represents an endpoint by which requests are
>> received
>> and responses are returned. Each Connector passes requests
>> on to the
>> associated "Container" (normally an Engine) for processing.
>>
>> By default, a non-SSL HTTP/1.1 Connector is established on
>> port 8080.
>> You can also enable an SSL HTTP/1.1 Connector on port 8443 by
>> following the instructions below and uncommenting the second
>> Connector
>> entry. SSL support requires the following steps (see the SSL
>> Config
>> HOWTO in the Tomcat 5 documentation bundle for more detailed
>> instructions):
>> * If your JDK version 1.3 or prior, download and install JSSE
>> 1.0.2 or
>> later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
>> * Execute:
>> %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA
>> (Windows)
>> $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA
>> (Unix)
>> with a password value of "changeit" for both the
>> certificate and
>> the keystore itself.
>>
>> By default, DNS lookups are enabled when a web application calls
>> request.getRemoteHost(). This can have an adverse impact on
>> performance, so you can disable it by setting the
>> "enableLookups" attribute to "false". When DNS lookups are
>> disabled,
>> request.getRemoteHost() will return the String version of the
>> IP address of the remote client.
>> -->
>>
>> <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
>> <Connector port="8080" maxHttpHeaderSize="8192"
>> maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
>> enableLookups="false" redirectPort="8443"
>> acceptCount="100"
>> connectionTimeout="20000" disableUploadTimeout="true" />
>> <!-- Note : To disable connection timeouts, set connectionTimeout
>> value
>> to 0 -->
>>
>> <!-- Note : To use gzip compression you could set the following
>> properties :
>> compression="on"
>> compressionMinSize="2048"
>> noCompressionUserAgents="gozilla, traviata"
>> compressableMimeType="text/html,text/xml"
>> -->
>>
>> <!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
>> <Connector port="8443" maxHttpHeaderSize="8192"
>> maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
>> enableLookups="false" disableUploadTimeout="true"
>> acceptCount="100" scheme="https" secure="true"
>> clientAuth="false" sslProtocol="TLS"
>> keystorepass="changeit"
>> keystoreFile="/etc/tomcat5/keystore"/>
>> <!-- Define an AJP 1.3 Connector on
>> port 8009 -->
>> <Connector port="8081"
>> enableLookups="false" redirectPort="8443"
>> protocol="AJP/1.3" />
>>
>> <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
>> <!-- See proxy documentation for more information about using
>> this. -->
>> <!--
>> <Connector port="8082"
>> maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
>> enableLookups="false" acceptCount="100"
>> connectionTimeout="20000"
>> proxyPort="80" disableUploadTimeout="true" />
>> -->
>>
>> <!-- An Engine represents the entry point (within Catalina) that
>> processes
>> every request. The Engine implementation for Tomcat stand alone
>> analyzes the HTTP headers included with the request, and
>> passes them
>> on to the appropriate Host (virtual host). -->
>>
>> <!-- You should set jvmRoute to support load-balancing via AJP ie :
>> <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
>> -->
>>
>> <!-- Define the top level container in our container hierarchy -->
>> <Engine name="Catalina" defaultHost="localhost">
>>
>> <!-- The request dumper valve dumps useful debugging information
>> about
>> the request headers and cookies that were received, and the
>> response
>> headers and cookies that were sent, for all requests
>> received by
>> this instance of Tomcat. If you care only about requests to a
>> particular virtual host, or a particular application, nest
>> this
>> element inside the corresponding <Host> or <Context> entry
>> instead.
>>
>> For a similar mechanism that is portable to all Servlet 2.4
>> containers, check out the "RequestDumperFilter" Filter in the
>> example application (the source for this filter may be
>> found in
>> "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
>>
>> Request dumping is disabled by default. Uncomment the
>> following
>> element to enable it. -->
>> <!--
>> <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
>> -->
>>
>> <!-- Because this Realm is here, an instance will be shared
>> globally -->
>>
>> <!-- This Realm uses the UserDatabase configured in the global JNDI
>> resources under the key "UserDatabase". Any edits
>> that are performed against this UserDatabase are immediately
>> available for use by the Realm. -->
>>
>> <!-- Comment out the old realm but leave here for now in case we
>> need to go back quickly -->
>> <!--
>> <Realm className="org.apache.catalina.realm.MemoryRealm" />
>> -->
>>
>> <!-- Replace the above Realm with one of the following to get a
>> Realm
>> stored in a database and accessed via JDBC -->
>>
>> <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
>> factory="org.apache.commons.dbcp.BasicDataSourceFactory"
>> driverName="org.postgresql.Driver"
>> connectionURL="jdbc:postgresql://192.118.54.182/tap"
>> connectionName="postgres" connectionPassword=""
>> resourceName="UserDatabase" />
>> <!-- <Host name="localhost" debug="0" appBase="/TAP"
>> unpackWARs="true" autoDeploy="true" xmlValidation="false"
>> xmlNamespaceAware="false"> -->
>> <!--
>> <Realm className="org.apache.catalina.realm.JDBCRealm"
>> driverName="org.gjt.mm.mysql.Driver"
>> connectionURL="jdbc:mysql://localhost/authority"
>> connectionName="test" connectionPassword="test"
>> userTable="users" userNameCol="user_name"
>> userCredCol="user_pass"
>> userRoleTable="user_roles" roleNameCol="role_name" />
>> -->
>>
>>
>> <!-- Define the default virtual host
>> Note: XML Schema validation will not work with Xerces 2.2.
>> -->
>> <Host name="localhost" appBase="/TAP" unpackWARs="true"
>> autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">
>> <Valve className="org.apache.catalina.valves.AccessLogValve"
>> directory="logs" prefix="localhost_access_log."
>> suffix=".txt" pattern="common"
>> resolveHosts="false"/>
>> <Context path=""
>> docBase="mc-tap-winasugo" debug="0" reloadable="true"
>> crossContext="true">
>> <Resource
>> name="jdbc/tapdb"
>> auth="Container"
>> type="javax.sql.DataSource"
>> driverClassName="org.postgresql.Driver"
>> url="jdbc:postgresql://192.118.54.182/tap"
>> username="postgres"
>> password=""
>> poolPreparedStatements="true"
>> maxActive="1000"
>> maxIdle="40"
>> maxWait="20000"
>> removeAbandoned="true"
>> removeAbandonedTimeout="60"
>> logAbandoned="true"
>> validationQuery="SELECT id FROM currencies LIMIT
>> 1" />
>> <Realm
>> className="org.apache.catalina.realm.JAASRealm"
>> appName="TAP"
>> userClassNames="tap.login.TAPUser"
>> roleClassNames="tap.login.TAPRole" />
>> </Context>
>> <!-- Defines a cluster for this node,
>> By defining this element, means that every manager will
>> be changed.
>> So when running a cluster, only make sure that you have
>> webapps in there
>> that need to be clustered and remove the other ones.
>> A cluster has the following parameters:
>>
>> className = the fully qualified name of the cluster class
>>
>> clusterName = a descriptive name for your cluster, can be
>> anything
>>
>> mcastAddr = the multicast address, has to be the same for
>> all the nodes
>>
>> mcastPort = the multicast port, has to be the same for
>> all the nodes
>>
>> mcastBindAddress = bind the multicast socket to a
>> specific address
>>
>> mcastTTL = the multicast TTL if you want to limit your
>> broadcast
>>
>> mcastSoTimeout = the multicast readtimeout
>>
>> mcastFrequency = the number of milliseconds in between
>> sending a "I'm alive" heartbeat
>>
>> mcastDropTime = the number a milliseconds before a node
>> is considered "dead" if no heartbeat is received
>>
>> tcpThreadCount = the number of threads to handle incoming
>> replication requests, optimal would be the same amount of threads as
>> nodes
>>
>> tcpListenAddress = the listen address (bind address) for
>> TCP cluster request on this host,
>> in case of multiple ethernet cards.
>> auto means that address becomes
>>
>> InetAddress.getLocalHost().getHostAddress()
>>
>> tcpListenPort = the tcp listen port
>>
>> tcpSelectorTimeout = the timeout (ms) for the
>> Selector.select() method in case the OS
>> has a wakup bug in java.nio. Set to
>> 0 for no timeout
>>
>> printToScreen = true means that managers will also print
>> to std.out
>>
>> expireSessionsOnShutdown = true means that
>>
>> useDirtyFlag = true means that we only replicate a
>> session after setAttribute,removeAttribute has been called.
>> false means to replicate the session after
>> each request.
>> false means that replication would work
>> for the following piece of code: (only for SimpleTcpReplicationManager)
>> <%
>> HashMap map =
>> (HashMap)session.getAttribute("map");
>> map.put("key","value");
>> %>
>> replicationMode = can be either 'pooled', 'synchronous'
>> or 'asynchronous'.
>> * Pooled means that the replication
>> happens using several sockets in a synchronous way. Ie, the data gets
>> replicated, then the request return. This is the same as the
>> 'synchronous' setting except it uses a pool of sockets, hence it is
>> multithreaded. This is the fastest and safest configuration. To use
>> this, also increase the nr of tcp threads that you have dealing with
>> replication.
>> * Synchronous means that the thread
>> that executes the request, is also the
>> thread the replicates the data to the
>> other nodes, and will not return until all
>> nodes have received the information.
>> * Asynchronous means that there is a
>> specific 'sender' thread for each cluster node,
>> so the request thread will queue the
>> replication request into a "smart" queue,
>> and then return to the client.
>> The "smart" queue is a queue where when
>> a session is added to the queue, and the same session
>> already exists in the queue from a
>> previous request, that session will be replaced
>> in the queue instead of replicating two
>> requests. This almost never happens, unless there is a
>> large network delay.
>> -->
>> <!--
>> When configuring for clustering, you also add in a valve
>> to catch all the requests
>> coming in, at the end of the request, the session may or
>> may not be replicated.
>> A session is replicated if and only if all the conditions
>> are met:
>> 1. useDirtyFlag is true or setAttribute or removeAttribute
>> has been called AND
>> 2. a session exists (has been created)
>> 3. the request is not trapped by the "filter" attribute
>>
>> The filter attribute is to filter out requests that could
>> not modify the session,
>> hence we don't replicate the session after the end of this
>> request.
>> The filter is negative, ie, anything you put in the
>> filter, you mean to filter out,
>> ie, no replication will be done on requests that match one
>> of the filters.
>> The filter attribute is delimited by ;, so you can't
>> escape out ; even if you wanted to.
>>
>> filter=".*\.gif;.*\.js;" means that we will not replicate
>> the session after requests with the URI
>> ending with .gif and .js are intercepted.
>>
>> The deployer element can be used to deploy apps cluster wide.
>> Currently the deployment only deploys/undeploys to working
>> members in the cluster
>> so no WARs are copied upons startup of a broken node.
>> The deployer watches a directory (watchDir) for WAR files
>> when watchEnabled="true"
>> When a new war file is added the war gets deployed to the
>> local instance,
>> and then deployed to the other instances in the cluster.
>> When a war file is deleted from the watchDir the war is
>> undeployed locally
>> and cluster wide
>> -->
>>
>>
>>
>> <Cluster
>> className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
>>
>> managerClassName="org.apache.catalina.cluster.session.DeltaManager"
>> expireSessionsOnShutdown="false"
>> useDirtyFlag="true"
>> notifyListenersOnReplication="true">
>>
>> <Membership
>>
>> className="org.apache.catalina.cluster.mcast.McastService"
>> mcastAddr="228.0.0.4"
>> mcastPort="45564"
>> mcastFrequency="500"
>>
>> mcastDropTime="3000"/>
>> <Receiver
>>
>> className="org.apache.catalina.cluster.tcp.ReplicationListener"
>> tcpListenAddress="auto"
>> tcpListenPort="4001"
>> tcpSelectorTimeout="100"
>> tcpThreadCount="6"/>
>> <Sender
>>
>> className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
>> replicationMode="pooled"
>> ackTimeout="15000"
>> waitForAck="true"/>
>> <Valve
>> className="org.apache.catalina.cluster.tcp.ReplicationValve"
>>
>> filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/>
>>
>> <Deployer
>> className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
>> tempDir="/tmp/TAP-temp/"
>> deployDir="/tmp/TAP-deploy/"
>> watchDir="/tmp/TAP-listen/"
>> watchEnabled="false"/>
>> <ClusterListener
>> className="org.apache.catalina.cluster.session.JvmRouteSessionIDBinderListener"
>> />
>> <ClusterListener
>> className="org.apache.catalina.cluster.session.ClusterSessionListener"/>
>> </Cluster>
>> <!--
>>
>> <Cluster
>> className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
>>
>> managerClassName="org.apache.catalina.cluster.session.DeltaManager"
>> expireSessionsOnShutdown="false"
>> useDirtyFlag="true"
>> notifyListenersOnReplication="true">
>>
>> <Membership
>>
>> className="org.apache.catalina.cluster.mcast.McastService"
>> mcastAddr="228.0.0.4"
>> mcastPort="45564"
>> mcastFrequency="500"
>> mcastDropTime="3000"/>
>>
>> <Receiver
>>
>> className="org.apache.catalina.cluster.tcp.ReplicationListener"
>> tcpListenAddress="auto"
>> tcpListenPort="4001"
>> tcpSelectorTimeout="100"
>> tcpThreadCount="6"/>
>>
>> <Sender
>>
>> className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
>> replicationMode="pooled"
>> ackTimeout="15000"
>> waitForAck="true"/>
>>
>> <Valve
>> className="org.apache.catalina.cluster.tcp.ReplicationValve"
>>
>> filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/>
>>
>>
>> <Deployer
>> className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
>> tempDir="/tmp/TAP-temp/"
>> deployDir="/tmp/TAP-deploy/"
>> watchDir="/tmp/TAP-listen/"
>> watchEnabled="false"/>
>>
>> <ClusterListener
>> className="org.apache.catalina.cluster.session.JvmRouteSessionIDBinderListener"
>> />
>> <ClusterListener
>> className="org.apache.catalina.cluster.session.ClusterSessionListener"/>
>> </Cluster>
>>
>> -->
>>
>>
>> <!-- Normally, users must authenticate themselves to each web app
>> individually. Uncomment the following entry if you would
>> like
>> a user to be authenticated the first time they encounter a
>> resource protected by a security constraint, and then
>> have that
>> user identity maintained across *all* web applications
>> contained
>> in this virtual host. -->
>> <!--
>> <Valve
>> className="org.apache.catalina.authenticator.SingleSignOn" />
>> -->
>>
>> <!-- Access log processes all requests for this virtual host. By
>> default, log files are created in the "logs" directory
>> relative to
>> $CATALINA_HOME. If you wish, you can specify a different
>> directory with the "directory" attribute. Specify either
>> a relative
>> (to $CATALINA_HOME) or absolute path to the desired
>> directory.
>> -->
>> <!--
>> <Valve className="org.apache.catalina.valves.AccessLogValve"
>> directory="logs" prefix="localhost_access_log."
>> suffix=".txt"
>> pattern="common" resolveHosts="false"/>
>> -->
>>
>> <!-- Access log processes all requests for this virtual host. By
>> default, log files are created in the "logs" directory
>> relative to
>> $CATALINA_HOME. If you wish, you can specify a different
>> directory with the "directory" attribute. Specify either
>> a relative
>> (to $CATALINA_HOME) or absolute path to the desired
>> directory.
>> This access log implementation is optimized for maximum
>> performance,
>> but is hardcoded to support only the "common" and
>> "combined" patterns.
>> -->
>> <!--
>> <Valve
>> className="org.apache.catalina.valves.FastCommonAccessLogValve"
>> directory="logs" prefix="localhost_access_log."
>> suffix=".txt"
>> pattern="common" resolveHosts="false"/>
>> -->
>>
>> </Host>
>>
>> </Engine>
>>
>> </Service>
>>
>> </Server>
>>
>>
>>
>> when i start the service , i get the following error
>>
>> SEVERE: Exception handling NamingResources property change
>> javax.management.MBeanException: Cannot load ModelMBean class
>> org.apache.catalina.mbeans.ContextResourceMBean nested exception
>> is java.lang.ClassNotFoundException:
>> org.apache.catalina.mbeans.ContextResourceMBean
>> java.lang.ClassNotFoundException:
>> org.apache.catalina.mbeans.ContextResourceMBean
>> at
>> org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1352)
>>
>> at
>> org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1198)
>>
>> at
>> org.apache.commons.modeler.ManagedBean.createMBean(ManagedBean.java:409)
>> at
>> org.apache.catalina.mbeans.MBeanUtils.createMBean(MBeanUtils.java:248)
>> at
>> org.apache.catalina.mbeans.ServerLifecycleListener.createMBeans(ServerLifecycleListener.java:403)
>>
>> at
>> org.apache.catalina.mbeans.ServerLifecycleListener.processNamingResourcesPropertyChange(ServerLifecycleListener.jav
>>
>> a:1315)
>> at
>> org.apache.catalina.mbeans.ServerLifecycleListener.propertyChange(ServerLifecycleListener.java:234)
>>
>> at
>> java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:252)
>>
>> at
>> org.apache.catalina.deploy.NamingResources.addResource(NamingResources.java:274)
>>
>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>> at
>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>
>> at
>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>
>> at java.lang.reflect.Method.invoke(Method.java:324)
>> at
>> org.apache.tomcat.util.IntrospectionUtils.callMethod1(IntrospectionUtils.java:898)
>>
>> at
>> org.apache.catalina.startup.SetNextNamingRule.end(SetNextNamingRule.java:97)
>>
>> at org.apache.tomcat.util.digester.Rule.end(Rule.java:228)
>> at
>> org.apache.tomcat.util.digester.Digester.endElement(Digester.java:1057)
>> at
>> org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
>> at
>> org.apache.xerces.impl.dtd.XMLDTDValidator.endNamespaceScope(Unknown
>> Source)
>> at
>> org.apache.xerces.impl.dtd.XMLDTDValidator.handleEndElement(Unknown
>> Source)
>> at
>> org.apache.xerces.impl.dtd.XMLDTDValidator.endElement(Unknown Source)
>> at
>> org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown
>> Source)
>> at
>> org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown
>> Source)
>> at
>> org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown
>> Source)
>> at org.apache.xerces.parsers.XML11Configuration.parse(Unknown
>> Source)
>> at org.apache.xerces.parsers.XML11Configuration.parse(Unknown
>> Source)
>> at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
>> at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown
>> Source)
>> at
>> org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
>> at
>> org.apache.tomcat.util.digester.Digester.parse(Digester.java:1561)
>> at
>> org.apache.catalina.startup.ContextConfig.applicationWebConfig(ContextConfig.java:351)
>>
>> at
>> org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:1034)
>> at
>> org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:260)
>>
>> at
>> org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
>>
>> at
>> org.apache.catalina.core.StandardContext.start(StandardContext.java:4119)
>> at
>> org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
>> at
>> org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
>> at
>> org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
>> at
>> org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
>> at
>> org.apache.catalina.core.StandardService.start(StandardService.java:450)
>> at
>> org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
>> at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>> at
>> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
>>
>> at
>> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
>>
>> at java.lang.reflect.Method.invoke(Method.java:324)
>> at
>> org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
>> at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
>> Oct 16, 2006 6:20:40 PM
>> org.apache.catalina.mbeans.ServerLifecycleListener propertyChange
>>
>> Any thoughts anyone ?
>>
>>
>> Assaf
>>
>>
>>
>> ---------------------------------------------------------------------
>> To start a new topic, e-mail: users@tomcat.apache.org
>> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
>> For additional commands, e-mail: users-help@tomcat.apache.org
>>
>
>
> ---------------------------------------------------------------------
> To start a new topic, e-mail: users@tomcat.apache.org
> To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
> For additional commands, e-mail: users-help@tomcat.apache.org
>
---------------------------------------------------------------------
To start a new topic, e-mail: users@tomcat.apache.org
To unsubscribe, e-mail: users-unsubscribe@tomcat.apache.org
For additional commands, e-mail: users-help@tomcat.apache.org
|