tomcat-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From i02ma...@uco.es
Subject Re: problems to connect with mySQL
Date Mon, 14 Jun 2004 15:50:32 GMT
The content of agendita.xml (context) is the following:

<?xml version='1.0' encoding='utf-8'?>
<Context crossContext="true" displayName="Agendita" docBase="agendita" 
path="/agendita" reloadable="true" workDir="work/Catalina/localhost/agendita">
</Context>


Mensaje citado por: David Smith <dns4@cornell.edu>:

> context.xml is just an xml file in conf/Catalina/localhost (at least for
> 
> the default TC 5 setup).  Replace 'context' with the name of your 
> webapp.  If the webapp is named samples, then the context file is 
> samples.xml.  The manager and admin context xml files are already there
> 
> for you to take a look at.  This context xml file is where to put 
> context specific database connections, loggers, filters, valves, etc.,
> ...
> 
> On the empty jsp:  Not all exceptions are caught in the jsp.  A small 
> few that should never normally happen can still be thrown and cause what
> 
> you saw.  I've had to suffer a few of them myself and always found the 
> exception in the logs.  You should still be able to find some info on 
> what happened by looking at the logs.
> 
> --David
> 
> i02maolp@uco.es wrote:
> 
> >context.xml doesn't exist. How do I have to create it?
> >
> >
> >
> >Mensaje citado por: David Smith <dns4@cornell.edu>:
> >
> >  
> >
> >>Hi.
> >>
> >>I don't see anything in your setup for connecting to MySQL except a
> load
> >>
> >>of references to the jar file in your classpath.  Also you didn't post
> 
> >>your context.xml file for this webapp (maybe it doesn't exist?).  I'd
> 
> >>take the mysql jar out of your classpath and see the URL's I posted in
> 
> >>my message 'Re: MySQL-connection pool' earlier this morning:
> >>
> >>Take a look at:
> >>http://jakarta.apache.org/tomcat/tomcat-5.0-doc/jndi-resources-howto.html
> >>
> >>About halfway down the page is a section titled 'JDBC Data Sources'
> >>
> >>Also take a look at:
> >>http://jakarta.apache.org/tomcat/tomcat-5.0-doc/jndi-datasource-examples-
> >>    
> >>
> >howto.html
> >  
> >
> >>
> >>This page has some specific examples to look at.
> >>
> >>--David
> >>
> >>i02maolp@uco.es wrote:
> >>
> >>    
> >>
> >>>I'm trying to make a web application with JSP and servlets that
> access
> >>>      
> >>>
> >>to a 
> >>    
> >>
> >>>MySQL data base. When I call to one of the servlets that access to
> the
> >>>      
> >>>
> >>DB, the 
> >>    
> >>
> >>>browser (mozilla) works for a few seconds but at the end it show
> >>>      
> >>>
> >>nothing (a 
> >>    
> >>
> >>>totally blank page) and in the browser status bar appear the
> following
> >>>      
> >>>
> >>>message: "Finished". What I have to do in order to it works?
> >>>
> >>>My enviroment is:
> >>>
> >>>Linux Red Hat
> >>>Tomcat 5.0.25
> >>>MySQL 4.0.17
> >>>
> >>>More information:
> >>>
> >>>web.xml (conf) ---->
> >>>
> >>><?xml version="1.0" encoding="ISO-8859-1"?>
> >>><!DOCTYPE web-app
> >>>    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
> >>>   "http://java.sun.com/dtd/web-app_2_3.dtd">
> >>><web-app>
> >>>
> >>> <!-- ======================== Introduction
> >>>      
> >>>
> >>============================== -->
> >>    
> >>
> >>> <!-- This document defines default values for *all* web applications
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- loaded into this instance of Tomcat.  As each application is   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- deployed, this file is processed, followed by the              
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- "/WEB-INF/web.xml" deployment descriptor from your own         
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- applications.                                                  
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- WARNING:  Do not configure application-specific resources here!
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- They should go in the "/WEB-INF/web.xml" file in your
> >>>      
> >>>
> >>application.   -->
> >>    
> >>
> >>> <!-- ================== Built In Servlet Definitions
> >>>      
> >>>
> >>==================== -->
> >>    
> >>
> >>> <!-- The default servlet for all web applications, that serves
> static
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- resources.  It processes all requests that are not mapped to
> >>>      
> >>>
> >>other   -->
> >>    
> >>
> >>> <!-- servlets with servlet mappings (defined either here or in your
> >>>      
> >>>
> >>own   -->
> >>    
> >>
> >>> <!-- web.xml file.  This servlet supports the following
> >>>      
> >>>
> >>initialization    -->
> >>    
> >>
> >>> <!-- parameters (default values are in square brackets):            
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   debug               Debugging detail level for messages
> logged
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       by this servlet.  [0]                    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   input               Input buffer size (in bytes) when reading
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       resources to be served.  [2048]          
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   listings            Should directory listings be produced if
> >>>      
> >>>
> >>there -->
> >>    
> >>
> >>> <!--                       is no welcome file in this directory? 
> >>>      
> >>>
> >>[true]  -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   output              Output buffer size (in bytes) when
> writing
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       resources to be served.  [2048]          
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   readonly            Is this context "read only", so HTTP     
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       commands like PUT and DELETE are         
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       rejected?  [true]                        
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   readmeFile          File name to display with the directory  
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       contents. [null]                         
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--  For directory listing customization. Checks localXsltFile,
> then
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--  globalXsltFile, then defaults to original behavior.           
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   localXsltFile       Make directory listings an XML doc and   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       pass the result to this style sheet
> >>>      
> >>>
> >>residing   -->
> >>    
> >>
> >>> <!--                       in that directory. This overrides        
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                        globalXsltFile[null]                    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   globalXsltFile      Site wide configuration version of       
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       localXsltFile This argument is expected  
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       to be a physical file. [null]            
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>>   <servlet>
> >>>       <servlet-name>default</servlet-name>
> >>>       <servlet-class>
> >>>         org.apache.catalina.servlets.DefaultServlet
> >>>       </servlet-class>
> >>>       <init-param>
> >>>           <param-name>debug</param-name>
> >>>           <param-value>0</param-value>
> >>>       </init-param>
> >>>       <init-param>
> >>>           <param-name>listings</param-name>
> >>>           <param-value>true</param-value>
> >>>       </init-param>
> >>>       <load-on-startup>1</load-on-startup>
> >>>   </servlet>
> >>>
> >>>
> >>> <!-- The "invoker" servlet, which executes anonymous servlet classes
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- that have not been defined in a web.xml file.  Traditionally,
> >>>      
> >>>
> >>this   -->
> >>    
> >>
> >>> <!-- servlet is mapped to URL pattern "/servlet/*", but you can map
> >>>      
> >>>
> >>it    -->
> >>    
> >>
> >>> <!-- to other patterns as well.  The extra path info portion of
> such
> >>>      
> >>>
> >>a    -->
> >>    
> >>
> >>> <!-- request must be the fully qualified class name of a Java class
> >>>      
> >>>
> >>that  -->
> >>    
> >>
> >>> <!-- implements Servlet (or extends HttpServlet), or the servlet
> name
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- of an existing servlet definition.     This servlet supports
> the
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- following initialization parameters (default values are in
> >>>      
> >>>
> >>square    -->
> >>    
> >>
> >>> <!-- brackets):                                                     
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   debug               Debugging detail level for messages
> logged
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       by this servlet.  [0]                    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>>   <!-- Marty Hall: uncommented to enable the invoker servlet. 
> >>>        You also need to uncomment the corresponding servlet-mapping
> >>>      
> >>>
> >>element.
> >>    
> >>
> >>>        See 
> >>>      
> >>>
> >>http://volume1.coreservlets.com/Apache-Tomcat-Tutorial.html
> >>    
> >>
> >>>   -->
> >>>   <servlet>
> >>>       <servlet-name>invoker</servlet-name>
> >>>       <servlet-class>
> >>>         org.apache.catalina.servlets.InvokerServlet
> >>>       </servlet-class>
> >>>       <init-param>
> >>>           <param-name>debug</param-name>
> >>>           <param-value>0</param-value>
> >>>       </init-param>
> >>>       <load-on-startup>2</load-on-startup>
> >>>   </servlet>
> >>>
> >>>
> >>> <!-- The JSP page compiler and execution servlet, which is the
> >>>      
> >>>
> >>mechanism  -->
> >>    
> >>
> >>> <!-- used by Tomcat to support JSP pages.  Traditionally, this
> >>>      
> >>>
> >>servlet    -->
> >>    
> >>
> >>> <!-- is mapped to URL patterh "*.jsp".  This servlet supports the   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- following initialization parameters (default values are in
> >>>      
> >>>
> >>square    -->
> >>    
> >>
> >>> <!-- brackets):                                                     
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   checkInterval       If development is false and reloading is
> >>>      
> >>>
> >>true, -->
> >>    
> >>
> >>> <!--                       background compiles are enabled.
> >>>      
> >>>
> >>checkInterval -->
> >>    
> >>
> >>> <!--                       is the time in seconds between checks to
> >>>      
> >>>
> >>see   -->
> >>    
> >>
> >>> <!--                       if a JSP page needs to be recompiled.
> >>>      
> >>>
> >>[300]    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   compiler            Which compiler Ant should use to compile
> >>>      
> >>>
> >>JSP   -->
> >>    
> >>
> >>> <!--                       pages.  See the Ant documentation for
> more
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       information. [javac]                     
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   classdebuginfo      Should the class file be compiled with   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       debugging information?  [true]           
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   classpath           What class path should I use while
> >>>      
> >>>
> >>compiling   -->
> >>    
> >>
> >>> <!--                       generated servlets?  [Created dynamically
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       based on the current web application]    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   development         Is Jasper used in development mode (will
> >>>      
> >>>
> >>check -->
> >>    
> >>
> >>> <!--                       for JSP modification on every access)? 
> >>>      
> >>>
> >>[true] -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   enablePooling       Determines whether tag handler pooling is
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       enabled  [true]                          
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   fork                Tell Ant to fork compiles of JSP pages
> so
> >>>      
> >>>
> >>that -->
> >>    
> >>
> >>> <!--                       a separate JVM is used for JSP page
> >>>      
> >>>
> >>compiles   -->
> >>    
> >>
> >>> <!--                       from the one Tomcat is running in. [true]
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   ieClassId           The class-id value to be sent to Internet
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       Explorer when using <jsp:plugin> tags.   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                      
> >>>      
> >>>
> >>[clsid:8AD9C840-044E-11D1-B3E9-00805F499D93]   -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   javaEncoding        Java file encoding to use for generating
> >>>      
> >>>
> >>java  -->
> >>    
> >>
> >>> <!--                       source files. [UTF8]                     
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   keepgenerated       Should we keep the generated Java source
> >>>      
> >>>
> >>code  -->
> >>    
> >>
> >>> <!--                       for each page instead of deleting it?
> >>>      
> >>>
> >>[true]   -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   mappedfile          Should we generate static content with
> one
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       print statement per input line, to ease  
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       debugging?  [false]                      
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   reloading           Should Jasper check for modified JSPs? 
> >>>      
> >>>
> >>[true] -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   suppressSmap        Should the generation of SMAP info for
> >>>      
> >>>
> >>JSR45   -->
> >>    
> >>
> >>> <!--                       debugging be suppressed?  [false]        
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   dumpSmap            Should the SMAP info for JSR45 debugging
> >>>      
> >>>
> >>be    -->
> >>    
> >>
> >>> <!--                       dumped to a file? [false]                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       False if suppressSmap is true            
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   genStrAsCharArray   Should text strings be generated as char 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       arrays, to improve performance in some
> >>>      
> >>>
> >>cases?  -->
> >>    
> >>
> >>> <!--                       [false]                                  
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   scratchdir          What scratch directory should we use when
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       compiling JSP pages?  [default work
> >>>      
> >>>
> >>directory  -->
> >>    
> >>
> >>> <!--                       for the current web application]         
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   tagpoolMaxSize      The maximum tag handler pool size  [5]   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   xpoweredBy          Determines whether X-Powered-By response 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       header is added by generated servlet 
> >>>      
> >>>
> >>[false]  -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- If you wish to use Jikes to compile JSP pages:                 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   Set the init parameter "compiler" to "jikes".  Define        
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   the property "-Dbuild.compiler.emacs=true" when starting
> >>>      
> >>>
> >>Tomcat    -->
> >>    
> >>
> >>> <!--   by adding the above to your CATALINA_OPTS environment
> >>>      
> >>>
> >>variable.    -->
> >>    
> >>
> >>> <!--   If you get an error reporting that jikes can't use UTF8
> >>>      
> >>>
> >>encoding,  -->
> >>    
> >>
> >>> <!--   try setting the init parameter "javaEncoding" to
> "ISO-8859-1".
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>>   <servlet>
> >>>       <servlet-name>jsp</servlet-name>
> >>>      
> >>>      
> >>>
> >><servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class>
> >>    
> >>
> >>>       <init-param>
> >>>           <param-name>fork</param-name>
> >>>           <param-value>false</param-value>
> >>>       </init-param>
> >>>       <init-param>
> >>>           <param-name>xpoweredBy</param-name>
> >>>           <param-value>false</param-value>
> >>>       </init-param>
> >>>       <load-on-startup>3</load-on-startup>
> >>>   </servlet>
> >>>
> >>>
> >>> <!-- Server Side Includes processing servlet, which processes SSI   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- directives in HTML pages consistent with similar support in web
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- servers like Apache.  Traditionally, this servlet is mapped to 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- URL pattern "*.shtml".  This servlet supports the following    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- initialization parameters (default values are in square
> >>>      
> >>>
> >>brackets):   -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   buffered            Should output from this servlet be
> >>>      
> >>>
> >>buffered?   -->
> >>    
> >>
> >>> <!--                       (0=false, 1=true)  [0]                   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   debug               Debugging detail level for messages
> logged
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       by this servlet.  [0]                    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   expires             The number of seconds before a page with
> >>>      
> >>>
> >>SSI   -->
> >>    
> >>
> >>> <!--                       directives will expire.  [No default]    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   isVirtualWebappRelative                                      
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       Should "virtual" paths be interpreted as 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       relative to the context root, instead of 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       the server root?  (0=false, 1=true) [0]  
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- IMPORTANT: To use the SSI servlet, you also need to rename the 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--            $CATALINA_HOME/server/lib/servlets-ssi.renametojar
> >>>      
> >>>
> >>file   -->
> >>    
> >>
> >>> <!--            to $CATALINA_HOME/server/lib/servlets-ssi.jar       
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>><!--
> >>>   <servlet>
> >>>       <servlet-name>ssi</servlet-name>
> >>>       <servlet-class>
> >>>         org.apache.catalina.ssi.SSIServlet
> >>>       </servlet-class>
> >>>       <init-param>
> >>>         <param-name>buffered</param-name>
> >>>         <param-value>1</param-value>
> >>>       </init-param>
> >>>       <init-param>
> >>>         <param-name>debug</param-name>
> >>>         <param-value>0</param-value>
> >>>       </init-param>
> >>>       <init-param>
> >>>         <param-name>expires</param-name>
> >>>         <param-value>666</param-value>
> >>>       </init-param>
> >>>       <init-param>
> >>>         <param-name>isVirtualWebappRelative</param-name>
> >>>         <param-value>0</param-value>
> >>>       </init-param>
> >>>       <load-on-startup>4</load-on-startup>
> >>>   </servlet>
> >>>-->
> >>>
> >>>
> >>> <!-- Common Gateway Includes (CGI) processing servlet, which
> supports
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- execution of external applications that conform to the CGI spec
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- requirements.  Typically, this servlet is mapped to the URL
> >>>      
> >>>
> >>pattern  -->
> >>    
> >>
> >>> <!-- "/cgi-bin/*", which means that any CGI applications that are   
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- executed must be present within the web application.  This
> >>>      
> >>>
> >>servlet   -->
> >>    
> >>
> >>> <!-- supports the following initialization parameters (default
> values
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- are in square brackets):                                       
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   cgiPathPrefix       The CGI search path will start at        
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       webAppRootDir + File.separator + this
> >>>      
> >>>
> >>prefix.  -->
> >>    
> >>
> >>> <!--                       [WEB-INF/cgi]                            
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   clientInputTimeout  The time (in milliseconds) to wait for
> >>>      
> >>>
> >>input   -->
> >>    
> >>
> >>> <!--                       from the browser before assuming that
> >>>      
> >>>
> >>there    -->
> >>    
> >>
> >>> <!--                       is none.  [100]                          
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--   debug               Debugging detail level for messages
> logged
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                       by this servlet.  [0]                    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- IMPORTANT: To use the CGI servlet, you also need to rename the 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--            $CATALINA_HOME/server/lib/servlets-cgi.renametojar
> >>>      
> >>>
> >>file   -->
> >>    
> >>
> >>> <!--            to $CATALINA_HOME/server/lib/servlets-cgi.jar       
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>><!--
> >>>   <servlet>
> >>>       <servlet-name>cgi</servlet-name>
> >>>      
> >>>      
> >>>
> >><servlet-class>org.apache.catalina.servlets.CGIServlet</servlet-class>
> >>    
> >>
> >>>       <init-param>
> >>>         <param-name>clientInputTimeout</param-name>
> >>>         <param-value>100</param-value>
> >>>       </init-param>
> >>>       <init-param>
> >>>         <param-name>debug</param-name>
> >>>         <param-value>6</param-value>
> >>>       </init-param>
> >>>       <init-param>
> >>>         <param-name>cgiPathPrefix</param-name>
> >>>         <param-value>WEB-INF/cgi</param-value>
> >>>       </init-param>
> >>>        <load-on-startup>5</load-on-startup>
> >>>   </servlet>
> >>>-->
> >>>
> >>>
> >>> <!-- ================ Built In Servlet Mappings
> >>>      
> >>>
> >>========================= -->
> >>    
> >>
> >>> <!-- The servlet mappings for the built in servlets defined above. 
> >>>      
> >>>
> >>Note  -->
> >>    
> >>
> >>> <!-- that, by default, the CGI and SSI servlets are *not* mapped. 
> >>>      
> >>>
> >>You    -->
> >>    
> >>
> >>> <!-- must uncomment these mappings (or add them to your
> application's
> >>>      
> >>>
> >>own -->
> >>    
> >>
> >>> <!-- web.xml deployment descriptor) to enable these services        
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>>   <!-- The mapping for the default servlet -->
> >>>   <servlet-mapping>
> >>>       <servlet-name>default</servlet-name>
> >>>       <url-pattern>/</url-pattern>
> >>>   </servlet-mapping>
> >>>   
> >>>   <!-- Marty Hall: uncommented to enable the invoker servlet. 
> >>>        You also need to uncomment the corresponding servlet element
> >>>      
> >>>
> >>earlier 
> >>    
> >>
> >>>in the file.
> >>>        See 
> >>>      
> >>>
> >>http://volume1.coreservlets.com/Apache-Tomcat-Tutorial.html
> >>    
> >>
> >>>   -->
> >>>   <!-- The mapping for the invoker servlet -->
> >>>   <servlet-mapping>
> >>>       <servlet-name>invoker</servlet-name>
> >>>       <url-pattern>/servlet/*</url-pattern>
> >>>   </servlet-mapping>
> >>>
> >>>   <!-- The mapping for the JSP servlet -->
> >>>   <servlet-mapping>
> >>>       <servlet-name>jsp</servlet-name>
> >>>       <url-pattern>*.jsp</url-pattern>
> >>>   </servlet-mapping>
> >>>
> >>>   <servlet-mapping>
> >>>       <servlet-name>jsp</servlet-name>
> >>>       <url-pattern>*.jspx</url-pattern>
> >>>   </servlet-mapping>
> >>>
> >>>   <!-- The mapping for the SSI servlet -->
> >>><!--
> >>>   <servlet-mapping>
> >>>       <servlet-name>ssi</servlet-name>
> >>>       <url-pattern>*.shtml</url-pattern>
> >>>   </servlet-mapping>
> >>>-->
> >>>
> >>>   <!-- The mapping for the CGI Gateway servlet -->
> >>>
> >>><!--
> >>>   <servlet-mapping>
> >>>       <servlet-name>cgi</servlet-name>
> >>>       <url-pattern>/cgi-bin/*</url-pattern>
> >>>   </servlet-mapping>
> >>>-->
> >>>
> >>>
> >>> <!-- ==================== Default Session Configuration
> >>>      
> >>>
> >>================= -->
> >>    
> >>
> >>> <!-- You can set the default session timeout (in minutes) for all
> >>>      
> >>>
> >>newly   -->
> >>    
> >>
> >>> <!-- created sessions by modifying the value below.                 
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>>   <session-config>
> >>>       <session-timeout>30</session-timeout>
> >>>   </session-config>
> >>>
> >>>
> >>> <!-- ===================== Default MIME Type Mappings
> >>>      
> >>>
> >>=================== -->
> >>    
> >>
> >>> <!-- When serving static resources, Tomcat will automatically
> >>>      
> >>>
> >>generate    -->
> >>    
> >>
> >>> <!-- a "Content-Type" header based on the resource's filename
> >>>      
> >>>
> >>extension,  -->
> >>    
> >>
> >>> <!-- based on these mappings.  Additional mappings can be added
> here
> >>>      
> >>>
> >>(to  -->
> >>    
> >>
> >>> <!-- apply to all web applications), or in your own application's
> >>>      
> >>>
> >>web.xml -->
> >>    
> >>
> >>> <!-- deployment descriptor.                                         
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>>   <mime-mapping>
> >>>       <extension>abs</extension>
> >>>       <mime-type>audio/x-mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>ai</extension>
> >>>       <mime-type>application/postscript</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>aif</extension>
> >>>       <mime-type>audio/x-aiff</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>aifc</extension>
> >>>       <mime-type>audio/x-aiff</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>aiff</extension>
> >>>       <mime-type>audio/x-aiff</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>aim</extension>
> >>>       <mime-type>application/x-aim</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>art</extension>
> >>>       <mime-type>image/x-jg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>asf</extension>
> >>>       <mime-type>video/x-ms-asf</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>asx</extension>
> >>>       <mime-type>video/x-ms-asf</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>au</extension>
> >>>       <mime-type>audio/basic</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>avi</extension>
> >>>       <mime-type>video/x-msvideo</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>avx</extension>
> >>>       <mime-type>video/x-rad-screenplay</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>bcpio</extension>
> >>>       <mime-type>application/x-bcpio</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>bin</extension>
> >>>       <mime-type>application/octet-stream</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>bmp</extension>
> >>>       <mime-type>image/bmp</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>body</extension>
> >>>       <mime-type>text/html</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>cdf</extension>
> >>>       <mime-type>application/x-cdf</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>cer</extension>
> >>>       <mime-type>application/x-x509-ca-cert</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>class</extension>
> >>>       <mime-type>application/java</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>cpio</extension>
> >>>       <mime-type>application/x-cpio</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>csh</extension>
> >>>       <mime-type>application/x-csh</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>css</extension>
> >>>       <mime-type>text/css</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>dib</extension>
> >>>       <mime-type>image/bmp</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>doc</extension>
> >>>       <mime-type>application/msword</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>dtd</extension>
> >>>       <mime-type>text/plain</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>dv</extension>
> >>>       <mime-type>video/x-dv</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>dvi</extension>
> >>>       <mime-type>application/x-dvi</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>eps</extension>
> >>>       <mime-type>application/postscript</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>etx</extension>
> >>>       <mime-type>text/x-setext</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>exe</extension>
> >>>       <mime-type>application/octet-stream</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>gif</extension>
> >>>       <mime-type>image/gif</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>gtar</extension>
> >>>       <mime-type>application/x-gtar</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>gz</extension>
> >>>       <mime-type>application/x-gzip</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>hdf</extension>
> >>>       <mime-type>application/x-hdf</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>hqx</extension>
> >>>       <mime-type>application/mac-binhex40</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>htc</extension>
> >>>       <mime-type>text/x-component</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>htm</extension>
> >>>       <mime-type>text/html</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>html</extension>
> >>>       <mime-type>text/html</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>hqx</extension>
> >>>       <mime-type>application/mac-binhex40</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>ief</extension>
> >>>       <mime-type>image/ief</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>jad</extension>
> >>>       <mime-type>text/vnd.sun.j2me.app-descriptor</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>jar</extension>
> >>>       <mime-type>application/java-archive</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>java</extension>
> >>>       <mime-type>text/plain</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>jnlp</extension>
> >>>       <mime-type>application/x-java-jnlp-file</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>jpe</extension>
> >>>       <mime-type>image/jpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>jpeg</extension>
> >>>       <mime-type>image/jpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>jpg</extension>
> >>>       <mime-type>image/jpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>js</extension>
> >>>       <mime-type>text/javascript</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>jsf</extension>
> >>>       <mime-type>text/plain</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>jspf</extension>
> >>>       <mime-type>text/plain</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>kar</extension>
> >>>       <mime-type>audio/x-midi</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>latex</extension>
> >>>       <mime-type>application/x-latex</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>m3u</extension>
> >>>       <mime-type>audio/x-mpegurl</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mac</extension>
> >>>       <mime-type>image/x-macpaint</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>man</extension>
> >>>       <mime-type>application/x-troff-man</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>me</extension>
> >>>       <mime-type>application/x-troff-me</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mid</extension>
> >>>       <mime-type>audio/x-midi</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>midi</extension>
> >>>       <mime-type>audio/x-midi</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mif</extension>
> >>>       <mime-type>application/x-mif</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mov</extension>
> >>>       <mime-type>video/quicktime</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>movie</extension>
> >>>       <mime-type>video/x-sgi-movie</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mp1</extension>
> >>>       <mime-type>audio/x-mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mp2</extension>
> >>>       <mime-type>audio/x-mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mp3</extension>
> >>>       <mime-type>audio/x-mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mpa</extension>
> >>>       <mime-type>audio/x-mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mpe</extension>
> >>>       <mime-type>video/mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mpeg</extension>
> >>>       <mime-type>video/mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mpega</extension>
> >>>       <mime-type>audio/x-mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mpg</extension>
> >>>       <mime-type>video/mpeg</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>mpv2</extension>
> >>>       <mime-type>video/mpeg2</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>ms</extension>
> >>>       <mime-type>application/x-wais-source</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>nc</extension>
> >>>       <mime-type>application/x-netcdf</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>oda</extension>
> >>>       <mime-type>application/oda</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pbm</extension>
> >>>       <mime-type>image/x-portable-bitmap</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pct</extension>
> >>>       <mime-type>image/pict</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pdf</extension>
> >>>       <mime-type>application/pdf</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pgm</extension>
> >>>       <mime-type>image/x-portable-graymap</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pic</extension>
> >>>       <mime-type>image/pict</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pict</extension>
> >>>       <mime-type>image/pict</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pls</extension>
> >>>       <mime-type>audio/x-scpls</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>png</extension>
> >>>       <mime-type>image/png</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pnm</extension>
> >>>       <mime-type>image/x-portable-anymap</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>pnt</extension>
> >>>       <mime-type>image/x-macpaint</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>ppm</extension>
> >>>       <mime-type>image/x-portable-pixmap</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>ps</extension>
> >>>       <mime-type>application/postscript</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>psd</extension>
> >>>       <mime-type>image/x-photoshop</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>qt</extension>
> >>>       <mime-type>video/quicktime</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>qti</extension>
> >>>       <mime-type>image/x-quicktime</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>qtif</extension>
> >>>       <mime-type>image/x-quicktime</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>ras</extension>
> >>>       <mime-type>image/x-cmu-raster</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>rgb</extension>
> >>>       <mime-type>image/x-rgb</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>rm</extension>
> >>>       <mime-type>application/vnd.rn-realmedia</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>roff</extension>
> >>>       <mime-type>application/x-troff</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>rtf</extension>
> >>>       <mime-type>application/rtf</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>rtx</extension>
> >>>       <mime-type>text/richtext</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>sh</extension>
> >>>       <mime-type>application/x-sh</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>shar</extension>
> >>>       <mime-type>application/x-shar</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>smf</extension>
> >>>       <mime-type>audio/x-midi</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>sit</extension>
> >>>       <mime-type>application/x-stuffit</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>snd</extension>
> >>>       <mime-type>audio/basic</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>src</extension>
> >>>       <mime-type>application/x-wais-source</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>sv4cpio</extension>
> >>>       <mime-type>application/x-sv4cpio</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>sv4crc</extension>
> >>>       <mime-type>application/x-sv4crc</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>swf</extension>
> >>>       <mime-type>application/x-shockwave-flash</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>t</extension>
> >>>       <mime-type>application/x-troff</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>tar</extension>
> >>>       <mime-type>application/x-tar</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>tcl</extension>
> >>>       <mime-type>application/x-tcl</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>tex</extension>
> >>>       <mime-type>application/x-tex</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>texi</extension>
> >>>       <mime-type>application/x-texinfo</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>texinfo</extension>
> >>>       <mime-type>application/x-texinfo</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>tif</extension>
> >>>       <mime-type>image/tiff</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>tiff</extension>
> >>>       <mime-type>image/tiff</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>tr</extension>
> >>>       <mime-type>application/x-troff</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>tsv</extension>
> >>>       <mime-type>text/tab-separated-values</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>txt</extension>
> >>>       <mime-type>text/plain</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>ulw</extension>
> >>>       <mime-type>audio/basic</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>ustar</extension>
> >>>       <mime-type>application/x-ustar</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>xbm</extension>
> >>>       <mime-type>image/x-xbitmap</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>xml</extension>
> >>>       <mime-type>text/xml</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>xpm</extension>
> >>>       <mime-type>image/x-xpixmap</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>xsl</extension>
> >>>       <mime-type>text/xml</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>xwd</extension>
> >>>       <mime-type>image/x-xwindowdump</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>wav</extension>
> >>>       <mime-type>audio/x-wav</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>svg</extension>
> >>>       <mime-type>image/svg+xml</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>svgz</extension>
> >>>       <mime-type>image/svg+xml</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <!-- Wireless Bitmap -->
> >>>       <extension>wbmp</extension>
> >>>       <mime-type>image/vnd.wap.wbmp</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <!-- WML Source -->
> >>>       <extension>wml</extension>
> >>>       <mime-type>text/vnd.wap.wml</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <!-- Compiled WML -->
> >>>       <extension>wmlc</extension>
> >>>       <mime-type>application/vnd.wap.wmlc</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <!-- WML Script Source -->
> >>>       <extension>wmls</extension>
> >>>       <mime-type>text/vnd.wap.wmlscript</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <!-- Compiled WML Script -->
> >>>       <extension>wmlscriptc</extension>
> >>>       <mime-type>application/vnd.wap.wmlscriptc</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>wrl</extension>
> >>>       <mime-type>x-world/x-vrml</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>Z</extension>
> >>>       <mime-type>application/x-compress</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>z</extension>
> >>>       <mime-type>application/x-compress</mime-type>
> >>>   </mime-mapping>
> >>>   <mime-mapping>
> >>>       <extension>zip</extension>
> >>>       <mime-type>application/zip</mime-type>
> >>>   </mime-mapping>
> >>>
> >>>
> >>> <!-- ==================== Default Welcome File List
> >>>      
> >>>
> >>===================== -->
> >>    
> >>
> >>> <!-- When a request URI refers to a directory, the default servlet
> >>>      
> >>>
> >>looks  -->
> >>    
> >>
> >>> <!-- for a "welcome file" within that directory and, if present,    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- to the corresponding resource URI for display.  If no welcome
> >>>      
> >>>
> >>file   -->
> >>    
> >>
> >>> <!-- is present, the default servlet either serves a directory
> >>>      
> >>>
> >>listing,   -->
> >>    
> >>
> >>> <!-- or returns a 404 status, depending on how it is configured.    
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!--                                                                
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- If you define welcome files in your own application's web.xml  
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- deployment descriptor, that list *replaces* the list configured
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- here, so be sure that you include any of the default values
> that
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>> <!-- you wish to include.                                           
> 
> >>>      
> >>>
> >>    -->
> >>    
> >>
> >>>   <welcome-file-list>
> >>>       <welcome-file>index.html</welcome-file>
> >>>       <welcome-file>index.htm</welcome-file>
> >>>       <welcome-file>index.jsp</welcome-file>
> >>>   </welcome-file-list>
> >>>
> >>></web-app>
> >>>
> >>>      
> >>>
> 
>>******************************************************************************
*
> >>    
> >>
> >*
> >  
> >
> >>>***************************
> >>>
> >>>server.xml (conf) ---->
> >>>
> >>><?xml version='1.0' encoding='utf-8'?>
> >>><Server>
> >>> <Listener
> >>>      
> >>>
> >>className="org.apache.catalina.mbeans.ServerLifecycleListener"/>
> >>    
> >>
> >>> <Listener 
> >>>className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>
> >>> <GlobalNamingResources>
> >>>   <Environment name="simpleValue" type="java.lang.Integer"
> >>>      
> >>>
> >>value="30"/>
> >>    
> >>
> >>>   <Resource auth="Container" description="User database that can be
> >>>      
> >>>
> >>updated 
> >>    
> >>
> >>>and saved" name="UserDatabase"
> >>>      
> >>>
> >>type="org.apache.catalina.UserDatabase"/>
> >>    
> >>
> >>>   <ResourceParams name="UserDatabase">
> >>>     <parameter>
> >>>       <name>factory</name>
> >>>      
> >>>      
> >>>
> >><value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
> >>    
> >>
> >>>     </parameter>
> >>>     <parameter>
> >>>       <name>pathname</name>
> >>>       <value>conf/tomcat-users.xml</value>
> >>>     </parameter>
> >>>   </ResourceParams>
> >>> </GlobalNamingResources>
> >>> <Service name="Catalina">
> >>>   <Connector acceptCount="100" connectionTimeout="20000" 
> >>>disableUploadTimeout="true" port="80" redirectPort="8443">
> >>>   </Connector>
> >>>   <Connector port="8009" protocol="AJP/1.3" 
> >>>protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler" 
> >>>redirectPort="8443">
> >>>   </Connector>
> >>>   <Engine defaultHost="localhost" name="Catalina">
> >>>     <Host appBase="webapps" name="localhost">
> >>>       <DefaultContext 
> >>>className="org.apache.catalina.core.StandardDefaultContext"
> >>>      
> >>>
> >>reloadable="true">
> >>    
> >>
> >>>       </DefaultContext>
> >>>       <Logger className="org.apache.catalina.logger.FileLogger" 
> >>>prefix="localhost_log." suffix=".txt" timestamp="true"/>
> >>>     </Host>
> >>>     <Logger className="org.apache.catalina.logger.FileLogger" 
> >>>prefix="catalina_log." suffix=".txt" timestamp="true"/>
> >>>     <Realm
> className="org.apache.catalina.realm.UserDatabaseRealm"/>
> >>>   </Engine>
> >>> </Service>
> >>></Server>
> >>>
> >>>      
> >>>
> 
>>******************************************************************************
*
> >>    
> >>
> >*
> >  
> >
> >>>*********************************
> >>>
> >>>web.xml (WEB_INF) --->
> >>>
> >>><?xml version="1.0" encoding="ISO-8859-1"?>
> >>>
> >>><!DOCTYPE web-app
> >>>   PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
> >>>   "http://java.sun.com/dtd/web-app_2_3.dtd">
> >>>
> >>><web-app>
> >>>  <display-name>
> >>>      Agendita
> >>>  </display-name>
> >>>  <description>
> >>>      Es un ejemplo que muestra el funcionamiento de los Java
> Servlets
> >>>      
> >>>
> >>con 
> >>    
> >>
> >>>MySQL
> >>>  </description>
> >>>  <servlet-mapping>
> >>>      <servlet-name>invoker</servlet-name>
> >>>      <url-pattern>/servlet/*</url-pattern>
> >>>  </servlet-mapping>
> >>></web-app>
> >>>
> >>>      
> >>>
> 
>>******************************************************************************
*
> >>    
> >>
> >*
> >  
> >
> >>>***********************************
> >>>
> >>>[root@localhost root]# echo $CLASSPATH
> >>>/opt/SUNWappserver/jdk/lib:/usr/local/jakarta-tomcat-
> >>>5.0.25/common/lib:/usr/local/mysql-connector-java-3.0.14-
> >>>production:/usr/local/jakarta-tomcat-5.0.25/common/lib/servlet-
> >>>api.jar:/usr/local/jakarta-tomcat-5.0.25/common/lib/mysql-connector-java-
> >>>      
> >>>
> >3.0.14-
> >  
> >
> >>>production-bin.jar:/opt/SUNWappserver/jdk/lib:/usr/local/jakarta-tomcat-
> >>>5.0.25/common/lib:/usr/local/mysql-connector-java-3.0.14-
> >>>production:/usr/local/jakarta-tomcat-5.0.25/common/lib/servlet-
> >>>api.jar:/usr/local/jakarta-tomcat-5.0.25/common/lib/mysql-connector-java-
> >>>      
> >>>
> >3.0.14-
> >  
> >
> >>>production-bin.jar:/opt/SUNWappserver/jdk/lib:/usr/local/jakarta-tomcat-
> >>>5.0.25/common/lib:/usr/local/mysql-connector-java-3.0.14-
> >>>production:/usr/local/jakarta-tomcat-5.0.25/common/lib/servlet-
> >>>api.jar:/usr/local/jakarta-tomcat-5.0.25/common/lib/mysql-connector-java-
> >>>      
> >>>
> >3.0.14-
> >  
> >
> >>>production-bin.jar:
> >>>
> >>>
> >>>      
> >>>
> 
>>******************************************************************************
*
> >>    
> >>
> >*
> >  
> >
> >>>***********************************
> >>>
> >>>[root@localhost root]# netstat -tlnp
> >>>Active Internet connections (only servers)
> >>>Proto Recv-Q Send-Q Local Address           Foreign Address        
> >>>      
> >>>
> >>State       
> >>    
> >>
> >>>PID/Program name
> >>>tcp        0      0 0.0.0.0:32768           0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>3529/rpc.statd
> >>>tcp        0      0 127.0.0.1:32769         0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>3691/xinetd
> >>>tcp        0      0 127.0.0.1:8005          0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>4385/java
> >>>tcp        0      0 0.0.0.0:8009            0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>4385/java
> >>>tcp        0      0 0.0.0.0:3306            0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>3807/mysqld
> >>>tcp        0      0 0.0.0.0:111             0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>3510/portmap
> >>>tcp        0      0 0.0.0.0:80              0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>4385/java
> >>>tcp        0      0 0.0.0.0:6000            0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>3922/X
> >>>tcp        0      0 0.0.0.0:22              0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>3677/sshd
> >>>tcp        0      0 127.0.0.1:631           0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>3635/cupsd
> >>>tcp        0      0 127.0.0.1:25            0.0.0.0:*              
> >>>      
> >>>
> >>LISTEN      
> >>    
> >>
> >>>3717/sendmail: acce
> >>>
> >>>
> >>>Thanks in advance.
> >>>
> >>>---------------------------------------------------------------------
> >>>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> >>>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >>>
> >>> 
> >>>
> >>>      
> >>>
> >>---------------------------------------------------------------------
> >>To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> >>For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >>
> >>
> >>    
> >>
> >
> >
> >---------------------------------------------------------------------
> >To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> >For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> >
> >  
> >
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> 
> 


---------------------------------------------------------------------
To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: tomcat-user-help@jakarta.apache.org


Mime
View raw message