tomcat-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Johan Louwers" <Sun...@dds.nl>
Subject Re: vertial host apache/tomcat
Date Thu, 18 Sep 2003 07:35:09 GMT
:-) I will post the message again that contains the original message. The
question was:


# ------------------begin original message ------------------
Ok, finaly have apache and tomcat running both on port 80.

I have created the following dir's
/export/home/www.someserver.com
/export/home/mnt.someserver.com

This will be the location of http://www.someserver.com  and
http://mnt.someserver.com

To test I have placed a document named info_www.txt in
/export/home/www.someserver.com and placed info_mnt.txt in
/export/home/mnt.someserver.com I have created 2 vertiualhosts like this in
my httpd.conf:
_____________________________________
NameVirtualHost *

<VirtualHost *>
    ServerAdmin Me@domain.com
    DocumentRoot/export/home/www.someserver.com
    ServerName www.someserver.com
    ErrorLog /export/home/log/errorlog-2
    CustomLog /export/home/log/customlog-2 custom
</VirtualHost>

<VirtualHost *>
    ServerAdmin Me@domain.com
    DocumentRoot /export/home/mnt.someserver.com
    ServerName mnt.someserver.com
    ErrorLog /export/home/log/errorlog-1
    CustomLog /export/home/log/customlog-1 custom
</VirtualHost>
_____________________________________

If  open www.someserver.com/www.txt this is correct and working Then I open
www.someserver.com/info_mnt.txt and this also opend. This should not be
possible info_mnt.txt should only be availabale true the domain
mnt.someserver.com. How is it possible I also can open it true
www.someserver.com ?

I also like to run jsp files under www.someserver.com and mnt.someserver.com
... people are not allowd to open documents from mnt in the www part......
How do I change the webapps dirs and make them available under
http://mnt.someserver.com and http://www,someserver.com ?

Thanks already,
Regards. Johan.
# ------------------end original message ------------------
----- Original Message -----
From: <achana@saysit.com>
To: "Tomcat Users List" <tomcat-user@jakarta.apache.org>
Sent: Thursday, September 18, 2003 7:44 AM
Subject: Re: vertial host apache/tomcat


> What's the question?
>
>
> Johan Louwers wrote:
> >
> > Luke,
> > I placed my httpd.conf in this mail..... Hope you (or someone else)
knows
> > the answer.....
> >
> > # --------------BEGIN HTTPD.CONF------------------
> > #
> > # Based upon the NCSA server configuration files originally by Rob
McCool.
> > #
> > # This is the main Apache server configuration file.  It contains the
> > # configuration directives that give the server its instructions.
> > # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information
about
> > # the directives.
> > #
> > # Do NOT simply read the instructions in here without understanding
> > # what they do.  They're here only as hints or reminders.  If you are
unsure
> > # consult the online docs. You have been warned.
> > #
> > # The configuration directives are grouped into three basic sections:
> > #  1. Directives that control the operation of the Apache server process
as
> > a
> > #     whole (the 'global environment').
> > #  2. Directives that define the parameters of the 'main' or 'default'
> > server,
> > #     which responds to requests that aren't handled by a virtual host.
> > #     These directives also provide default values for the settings
> > #     of all virtual hosts.
> > #  3. Settings for virtual hosts, which allow Web requests to be sent to
> > #     different IP addresses or hostnames and have them handled by the
> > #     same Apache server process.
> > #
> > # Configuration and logfile names: If the filenames you specify for many
> > # of the server's control files begin with "/" (or "drive:/" for Win32),
the
> > # server will use that explicit path.  If the filenames do *not* begin
> > # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> > # with ServerRoot set to "/usr/local/apache" will be interpreted by the
> > # server as "/usr/local/apache/logs/foo.log".
> > #
> >
> > ### Section 1: Global Environment
> > #
> > # The directives in this section affect the overall operation of Apache,
> > # such as the number of concurrent requests it can handle or where it
> > # can find its configuration files.
> > #
> >
> > #
> > # ServerRoot: The top of the directory tree under which the server's
> > # configuration, error, and log files are kept.
> > #
> > # NOTE!  If you intend to place this on an NFS (or otherwise network)
> > # mounted filesystem then please read the LockFile documentation
(available
> > # at
<URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
> > # you will save yourself a lot of trouble.
> > #
> > # Do NOT add a slash at the end of the directory path.
> > #
> > ServerRoot "/usr/local/apache"
> >
> > #
> > # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
> > #
> > <IfModule !mpm_winnt.c>
> > <IfModule !mpm_netware.c>
> > #LockFile logs/accept.lock
> > </IfModule>
> > </IfModule>
> >
> > #
> > # ScoreBoardFile: File used to store internal server process
information.
> > # If unspecified (the default), the scoreboard will be stored in an
> > # anonymous shared memory segment, and will be unavailable to
third-party
> > # applications.
> > # If specified, ensure that no two invocations of Apache share the same
> > # scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
> > #
> > <IfModule !mpm_netware.c>
> > <IfModule !perchild.c>
> > #ScoreBoardFile logs/apache_runtime_status
> > </IfModule>
> > </IfModule>
> >
> > #
> > # PidFile: The file in which the server should record its process
> > # identification number when it starts.
> > #
> > <IfModule !mpm_netware.c>
> > PidFile logs/httpd.pid
> > </IfModule>
> >
> > #
> > # Timeout: The number of seconds before receives and sends time out.
> > #
> > Timeout 300
> >
> > #
> > # KeepAlive: Whether or not to allow persistent connections (more than
> > # one request per connection). Set to "Off" to deactivate.
> > #
> > KeepAlive On
> >
> > #
> > # MaxKeepAliveRequests: The maximum number of requests to allow
> > # during a persistent connection. Set to 0 to allow an unlimited amount.
> > # We recommend you leave this number high, for maximum performance.
> > #
> > MaxKeepAliveRequests 100
> >
> > #
> > # KeepAliveTimeout: Number of seconds to wait for the next request from
the
> > # same client on the same connection.
> > #
> > KeepAliveTimeout 15
> >
> > ##
> > ## Server-Pool Size Regulation (MPM specific)
> > ##
> >
> > # prefork MPM
> > # StartServers: number of server processes to start
> > # MinSpareServers: minimum number of server processes which are kept
spare
> > # MaxSpareServers: maximum number of server processes which are kept
spare
> > # MaxClients: maximum number of server processes allowed to start
> > # MaxRequestsPerChild: maximum number of requests a server process
serves
> > <IfModule prefork.c>
> > StartServers         5
> > MinSpareServers      5
> > MaxSpareServers     10
> > MaxClients         150
> > MaxRequestsPerChild  0
> > </IfModule>
> >
> > # worker MPM
> > # StartServers: initial number of server processes to start
> > # MaxClients: maximum number of simultaneous client connections
> > # MinSpareThreads: minimum number of worker threads which are kept spare
> > # MaxSpareThreads: maximum number of worker threads which are kept spare
> > # ThreadsPerChild: constant number of worker threads in each server
process
> > # MaxRequestsPerChild: maximum number of requests a server process
serves
> > <IfModule worker.c>
> > StartServers         2
> > MaxClients         150
> > MinSpareThreads     25
> > MaxSpareThreads     75
> > ThreadsPerChild     25
> > MaxRequestsPerChild  0
> > </IfModule>
> >
> > # perchild MPM
> > # NumServers: constant number of server processes
> > # StartThreads: initial number of worker threads in each server process
> > # MinSpareThreads: minimum number of worker threads which are kept spare
> > # MaxSpareThreads: maximum number of worker threads which are kept spare
> > # MaxThreadsPerChild: maximum number of worker threads in each server
> > process
> > # MaxRequestsPerChild: maximum number of connections per server process
> > <IfModule perchild.c>
> > NumServers           5
> > StartThreads         5
> > MinSpareThreads      5
> > MaxSpareThreads     10
> > MaxThreadsPerChild  20
> > MaxRequestsPerChild  0
> > </IfModule>
> >
> > # WinNT MPM
> > # ThreadsPerChild: constant number of worker threads in the server
process
> > # MaxRequestsPerChild: maximum  number of requests a server process
serves
> > <IfModule mpm_winnt.c>
> > ThreadsPerChild 250
> > MaxRequestsPerChild  0
> > </IfModule>
> >
> > # BeOS MPM
> > # StartThreads: how many threads do we initially spawn?
> > # MaxClients:   max number of threads we can have (1 thread == 1 client)
> > # MaxRequestsPerThread: maximum number of requests each thread will
process
> > <IfModule beos.c>
> > StartThreads               10
> > MaxClients                 50
> > MaxRequestsPerThread       10000
> > </IfModule>
> >
> > # NetWare MPM
> > # ThreadStackSize: Stack size allocated for each worker thread
> > # StartThreads: Number of worker threads launched at server startup
> > # MinSpareThreads: Minimum number of idle threads, to handle request
spikes
> > # MaxSpareThreads: Maximum number of idle threads
> > # MaxThreads: Maximum number of worker threads alive at the same time
> > # MaxRequestsPerChild: Maximum  number of requests a thread serves. It
is
> > #                      recommended that the default value of 0 be set
for
> > this
> > #                      directive on NetWare.  This will allow the thread
to
> > #                      continue to service requests indefinitely.
> > <IfModule mpm_netware.c>
> > ThreadStackSize      65536
> > StartThreads           250
> > MinSpareThreads         25
> > MaxSpareThreads        250
> > MaxThreads            1000
> > MaxRequestsPerChild      0
> > </IfModule>
> >
> > # OS/2 MPM
> > # StartServers: Number of server processes to maintain
> > # MinSpareThreads: Minimum number of idle threads per process,
> > #                  to handle request spikes
> > # MaxSpareThreads: Maximum number of idle threads per process
> > # MaxRequestsPerChild: Maximum number of connections per server process
> > <IfModule mpmt_os2.c>
> > StartServers           2
> > MinSpareThreads        5
> > MaxSpareThreads       10
> > MaxRequestsPerChild    0
> > </IfModule>
> >
> > #
> > # Listen: Allows you to bind Apache to specific IP addresses and/or
> > # ports, instead of the default. See also the <VirtualHost>
> > # directive.
> > #
> > # Change this to Listen on specific IP addresses as shown below to
> > # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
> > #
> > #Listen 12.34.56.78:80
> >
> > # Listen 80
> > Listen 10.99.1.115:80
> >
> > #
> > # Dynamic Shared Object (DSO) Support
> > #
> > # To be able to use the functionality of a module which was built as a
DSO
> > you
> > # have to place corresponding `LoadModule' lines at this location so the
> > # directives contained in it are actually available _before_ they are
used.
> > # Statically compiled modules (those listed by `httpd -l') do not need
> > # to be loaded here.
> > #
> > # Example:
> > # LoadModule foo_module modules/mod_foo.so
> > #
> >
> > #
> > # ExtendedStatus controls whether Apache will generate "full" status
> > # information (ExtendedStatus On) or just basic information
(ExtendedStatus
> > # Off) when the "server-status" handler is called. The default is Off.
> > #
> > #ExtendedStatus On
> >
> > ### Section 2: 'Main' server configuration
> > #
> > # The directives in this section set up the values used by the 'main'
> > # server, which responds to any requests that aren't handled by a
> > # <VirtualHost> definition.  These values also provide defaults for
> > # any <VirtualHost> containers you may define later in the file.
> > #
> > # All of these directives may appear inside <VirtualHost> containers,
> > # in which case these default settings will be overridden for the
> > # virtual host being defined.
> > #
> >
> > <IfModule !mpm_winnt.c>
> > <IfModule !mpm_netware.c>
> > #
> > # If you wish httpd to run as a different user or group, you must run
> > # httpd as root initially and it will switch.
> > #
> > # User/Group: The name (or #number) of the user/group to run httpd as.
> > #  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
> > #  . On HPUX you may not be able to use shared memory as nobody, and the
> > #    suggested workaround is to create a user www and use that user.
> > #  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
> > #  when the value of (unsigned)Group is above 60000;
> > #  don't use Group #-1 on these systems!
> > #
> > User nobody
> > Group #60001
> > </IfModule>
> > </IfModule>
> >
> > #
> > # ServerAdmin: Your address, where problems with the server should be
> > # e-mailed.  This address appears on some server-generated pages, such
> > # as error documents.  e.g. admin@your-domain.com
> > #
> > ServerAdmin Johan.Louwers@verder.nl
> >
> > #
> > # ServerName gives the name and port that the server uses to identify
> > itself.
> > # This can often be determined automatically, but we recommend you
specify
> > # it explicitly to prevent problems during startup.
> > #
> > # If this is not set to valid DNS name for your host, server-generated
> > # redirections will not work.  See also the UseCanonicalName directive.
> > #
> > # If your host doesn't have a registered DNS name, enter its IP address
> > here.
> > # You will have to access it by its address anyway, and this will make
> > # redirections work in a sensible way.
> > #
> > #ServerName new.host.name:80
> > ServerName 10.99.1.115
> >
> > #
> > # UseCanonicalName: Determines how Apache constructs self-referencing
> > # URLs and the SERVER_NAME and SERVER_PORT variables.
> > # When set "Off", Apache will use the Hostname and Port supplied
> > # by the client.  When set "On", Apache will use the value of the
> > # ServerName directive.
> > #
> > UseCanonicalName Off
> >
> > #
> > # DocumentRoot: The directory out of which you will serve your
> > # documents. By default, all requests are taken from this directory, but
> > # symbolic links and aliases may be used to point to other locations.
> > #
> > DocumentRoot "/export/home/webroot/"
> >
> > #
> > # Each directory to which Apache has access can be configured with
respect
> > # to which services and features are allowed and/or disabled in that
> > # directory (and its subdirectories).
> > #
> > # First, we configure the "default" to be a very restrictive set of
> > # features.
> > #
> > <Directory />
> >     Options FollowSymLinks
> >     AllowOverride None
> > </Directory>
> >
> > #
> > # Note that from this point forward you must specifically allow
> > # particular features to be enabled - so if something's not working as
> > # you might expect, make sure that you have specifically enabled it
> > # below.
> > #
> >
> > #
> > # This should be changed to whatever you set DocumentRoot to.
> > #
> > <Directory "/usr/local/apache/htdocs">
> >
> > #
> > # Possible values for the Options directive are "None", "All",
> > # or any combination of:
> > #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
MultiViews
> > #
> > # Note that "MultiViews" must be named *explicitly* --- "Options All"
> > # doesn't give it to you.
> > #
> > # The Options directive is both complicated and important.  Please see
> > # http://httpd.apache.org/docs-2.0/mod/core.html#options
> > # for more information.
> > #
> >     Options Indexes FollowSymLinks
> >
> > #
> > # AllowOverride controls what directives may be placed in .htaccess
files.
> > # It can be "All", "None", or any combination of the keywords:
> > #   Options FileInfo AuthConfig Limit
> > #
> >     AllowOverride None
> >
> > #
> > # Controls who can get stuff from this server.
> > #
> >     Order allow,deny
> >     Allow from all
> >
> > </Directory>
> >
> > #
> > # UserDir: The name of the directory that is appended onto a user's home
> > # directory if a ~user request is received.
> > #
> > UserDir public_html
> >
> > #
> > # Control access to UserDir directories.  The following is an example
> > # for a site where these directories are restricted to read-only.
> > #
> > #<Directory /home/*/public_html>
> > #    AllowOverride FileInfo AuthConfig Limit Indexes
> > #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> > #    <Limit GET POST OPTIONS PROPFIND>
> > #        Order allow,deny
> > #        Allow from all
> > #    </Limit>
> > #    <LimitExcept GET POST OPTIONS PROPFIND>
> > #        Order deny,allow
> > #        Deny from all
> > #    </LimitExcept>
> > #</Directory>
> >
> > #
> > # DirectoryIndex: sets the file that Apache will serve if a directory
> > # is requested.
> > #
> > # The index.html.var file (a type-map) is used to deliver content-
> > # negotiated documents.  The MultiViews Option can be used for the
> > # same purpose, but it is much slower.
> > #
> > DirectoryIndex index.html index.html.var
> >
> > #
> > # AccessFileName: The name of the file to look for in each directory
> > # for additional configuration directives.  See also the AllowOverride
> > # directive.
> > #
> > AccessFileName .htaccess
> >
> > #
> > # The following lines prevent .htaccess and .htpasswd files from being
> > # viewed by Web clients.
> > #
> > <Files ~ "^\.ht">
> >     Order allow,deny
> >     Deny from all
> > </Files>
> >
> > #
> > # TypesConfig describes where the mime.types file (or equivalent) is
> > # to be found.
> > #
> > TypesConfig conf/mime.types
> >
> > #
> > # DefaultType is the default MIME type the server will use for a
document
> > # if it cannot otherwise determine one, such as from filename
extensions.
> > # If your server contains mostly text or HTML documents, "text/plain" is
> > # a good value.  If most of your content is binary, such as applications
> > # or images, you may want to use "application/octet-stream" instead to
> > # keep browsers from trying to display binary files as though they are
> > # text.
> > #
> > DefaultType text/plain
> >
> > #
> > # The mod_mime_magic module allows the server to use various hints from
the
> > # contents of the file itself to determine its type.  The MIMEMagicFile
> > # directive tells the module where the hint definitions are located.
> > #
> > <IfModule mod_mime_magic.c>
> >     MIMEMagicFile conf/magic
> > </IfModule>
> >
> > #
> > # HostnameLookups: Log the names of clients or just their IP addresses
> > # e.g., www.apache.org (on) or 204.62.129.132 (off).
> > # The default is off because it'd be overall better for the net if
people
> > # had to knowingly turn this feature on, since enabling it means that
> > # each client request will result in AT LEAST one lookup request to the
> > # nameserver.
> > #
> > HostnameLookups Off
> >
> > #
> > # EnableMMAP: Control whether memory-mapping is used to deliver
> > # files (assuming that the underlying OS supports it).
> > # The default is on; turn this off if you serve from NFS-mounted
> > # filesystems.  On some systems, turning it off (regardless of
> > # filesystem) can improve performance; for details, please see
> > # http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
> > #
> > #EnableMMAP off
> >
> > #
> > # EnableSendfile: Control whether the sendfile kernel support is
> > # used  to deliver files (assuming that the OS supports it).
> > # The default is on; turn this off if you serve from NFS-mounted
> > # filesystems.  Please see
> > # http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
> > #
> > #EnableSendfile off
> >
> > #
> > # ErrorLog: The location of the error log file.
> > # If you do not specify an ErrorLog directive within a <VirtualHost>
> > # container, error messages relating to that virtual host will be
> > # logged here.  If you *do* define an error logfile for a <VirtualHost>
> > # container, that host's errors will be logged there and not here.
> > #
> > ErrorLog logs/error_log
> >
> > #
> > # LogLevel: Control the number of messages logged to the error_log.
> > # Possible values include: debug, info, notice, warn, error, crit,
> > # alert, emerg.
> > #
> > LogLevel warn
> >
> > #
> > # The following directives define some format nicknames for use with
> > # a CustomLog directive (see below).
> > #
> > LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
> > combined
> > LogFormat "%h %l %u %t \"%r\" %>s %b" common
> > LogFormat "%{Referer}i -> %U" referer
> > LogFormat "%{User-agent}i" agent
> >
> > # You need to enable mod_logio.c to use %I and %O
> > #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"
%I
> > %O" combinedio
> >
> > #
> > # The location and format of the access logfile (Common Logfile Format).
> > # If you do not define any access logfiles within a <VirtualHost>
> > # container, they will be logged here.  Contrariwise, if you *do*
> > # define per-<VirtualHost> access logfiles, transactions will be
> > # logged therein and *not* in this file.
> > #
> > CustomLog logs/access_log common
> >
> > #
> > # If you would like to have agent and referer logfiles, uncomment the
> > # following directives.
> > #
> > #CustomLog logs/referer_log referer
> > #CustomLog logs/agent_log agent
> >
> > #
> > # If you prefer a single logfile with access, agent, and referer
information
> > # (Combined Logfile Format) you can use the following directive.
> > #
> > #CustomLog logs/access_log combined
> >
> > #
> > # ServerTokens
> > # This directive configures what you return as the Server HTTP response
> > # Header. The default is 'Full' which sends information about the
OS-Type
> > # and compiled in modules.
> > # Set to one of:  Full | OS | Minor | Minimal | Major | Prod
> > # where Full conveys the most information, and Prod the least.
> > #
> > ServerTokens Full
> >
> > #
> > # Optionally add a line containing the server version and virtual host
> > # name to server-generated pages (internal error documents, FTP
directory
> > # listings, mod_status and mod_info output etc., but not CGI generated
> > # documents or custom error documents).
> > # Set to "EMail" to also include a mailto: link to the ServerAdmin.
> > # Set to one of:  On | Off | EMail
> > #
> > ServerSignature On
> >
> > #
> > # Aliases: Add here as many aliases as you need (with no limit). The
format
> > is
> > # Alias fakename realname
> > #
> > # Note that if you include a trailing / on fakename then the server will
> > # require it to be present in the URL.  So "/icons" isn't aliased in
this
> > # example, only "/icons/".  If the fakename is slash-terminated, then
the
> > # realname must also be slash terminated, and if the fakename omits the
> > # trailing slash, the realname must also omit it.
> > #
> > # We include the /icons/ alias for FancyIndexed directory listings.  If
you
> > # do not use FancyIndexing, you may comment this out.
> > #
> > Alias /icons/ "/usr/local/apache/icons/"
> >
> > <Directory "/usr/local/apache/icons">
> >     Options Indexes MultiViews
> >     AllowOverride None
> >     Order allow,deny
> >     Allow from all
> > </Directory>
> >
> > #
> > # This should be changed to the ServerRoot/manual/.  The alias provides
> > # the manual, even if you choose to move your DocumentRoot.  You may
comment
> > # this out if you do not care for the documentation.
> > #
> > AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$
> > "/usr/local/apache/manual$1"
> >
> > <Directory "/usr/local/apache/manual">
> >     Options Indexes
> >     AllowOverride None
> >     Order allow,deny
> >     Allow from all
> >
> >     <Files *.html>
> >         SetHandler type-map
> >     </Files>
> >
> >     SetEnvIf Request_URI ^/manual/de/ prefer-language=de
> >     SetEnvIf Request_URI ^/manual/en/ prefer-language=en
> >     SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr
> >     SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja
> >     SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko
> >     SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru
> >     RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$
> > /manual/$1$2
> > </Directory>
> >
> > #
> > # ScriptAlias: This controls which directories contain server scripts.
> > # ScriptAliases are essentially the same as Aliases, except that
> > # documents in the realname directory are treated as applications and
> > # run by the server when requested rather than as documents sent to the
> > client.
> > # The same rules about trailing "/" apply to ScriptAlias directives as
to
> > # Alias.
> > #
> > ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/"
> >
> > <IfModule mod_cgid.c>
> > #
> > # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
> > # for setting UNIX socket for communicating with cgid.
> > #
> > #Scriptsock            logs/cgisock
> > </IfModule>
> >
> > #
> > # "/usr/local/apache/cgi-bin" should be changed to whatever your
> > ScriptAliased
> > # CGI directory exists, if you have that configured.
> > #
> > <Directory "/usr/local/apache/cgi-bin">
> >     AllowOverride None
> >     Options None
> >     Order allow,deny
> >     Allow from all
> > </Directory>
> >
> > #
> > # Redirect allows you to tell clients about documents which used to
exist in
> > # your server's namespace, but do not anymore. This allows you to tell
the
> > # clients where to look for the relocated document.
> > # Example:
> > # Redirect permanent /foo http://www.example.com/bar
> >
> > #
> > # Directives controlling the display of server-generated directory
listings.
> > #
> >
> > #
> > # IndexOptions: Controls the appearance of server-generated directory
> > # listings.
> > #
> > IndexOptions FancyIndexing VersionSort
> >
> > #
> > # AddIcon* directives tell the server which icon to show for different
> > # files or filename extensions.  These are only displayed for
> > # FancyIndexed directories.
> > #
> > AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
> >
> > AddIconByType (TXT,/icons/text.gif) text/*
> > AddIconByType (IMG,/icons/image2.gif) image/*
> > AddIconByType (SND,/icons/sound2.gif) audio/*
> > AddIconByType (VID,/icons/movie.gif) video/*
> >
> > AddIcon /icons/binary.gif .bin .exe
> > AddIcon /icons/binhex.gif .hqx
> > AddIcon /icons/tar.gif .tar
> > AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
> > AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
> > AddIcon /icons/a.gif .ps .ai .eps
> > AddIcon /icons/layout.gif .html .shtml .htm .pdf
> > AddIcon /icons/text.gif .txt
> > AddIcon /icons/c.gif .c
> > AddIcon /icons/p.gif .pl .py
> > AddIcon /icons/f.gif .for
> > AddIcon /icons/dvi.gif .dvi
> > AddIcon /icons/uuencoded.gif .uu
> > AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
> > AddIcon /icons/tex.gif .tex
> > AddIcon /icons/bomb.gif core
> >
> > AddIcon /icons/back.gif ..
> > AddIcon /icons/hand.right.gif README
> > AddIcon /icons/folder.gif ^^DIRECTORY^^
> > AddIcon /icons/blank.gif ^^BLANKICON^^
> >
> > #
> > # DefaultIcon is which icon to show for files which do not have an icon
> > # explicitly set.
> > #
> > DefaultIcon /icons/unknown.gif
> >
> > #
> > # AddDescription allows you to place a short description after a file in
> > # server-generated indexes.  These are only displayed for FancyIndexed
> > # directories.
> > # Format: AddDescription "description" filename
> > #
> > #AddDescription "GZIP compressed document" .gz
> > #AddDescription "tar archive" .tar
> > #AddDescription "GZIP compressed tar archive" .tgz
> >
> > #
> > # ReadmeName is the name of the README file the server will look for by
> > # default, and append to directory listings.
> > #
> > # HeaderName is the name of a file which should be prepended to
> > # directory indexes.
> > ReadmeName README.html
> > HeaderName HEADER.html
> >
> > #
> > # IndexIgnore is a set of filenames which directory indexing should
ignore
> > # and not include in the listing.  Shell-style wildcarding is permitted.
> > #
> > IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
> >
> > #
> > # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
uncompress
> > # information on the fly. Note: Not all browsers support this.
> > # Despite the name similarity, the following Add* directives have
nothing
> > # to do with the FancyIndexing customization directives above.
> > #
> > #AddEncoding x-compress Z
> > #AddEncoding x-gzip gz tgz
> >
> > #
> > # DefaultLanguage and AddLanguage allows you to specify the language of
> > # a document. You can then use content negotiation to give a browser a
> > # file in a language the user can understand.
> > #
> > # Specify a default language. This means that all data
> > # going out without a specific language tag (see below) will
> > # be marked with this one. You probably do NOT want to set
> > # this unless you are sure it is correct for all cases.
> > #
> > # * It is generally better to not mark a page as
> > # * being a certain language than marking it with the wrong
> > # * language!
> > #
> > # DefaultLanguage nl
> > #
> > # Note 1: The suffix does not have to be the same as the language
> > # keyword --- those with documents in Polish (whose net-standard
> > # language code is pl) may wish to use "AddLanguage pl .po" to
> > # avoid the ambiguity with the common suffix for perl scripts.
> > #
> > # Note 2: The example entries below illustrate that in some cases
> > # the two character 'Language' abbreviation is not identical to
> > # the two character 'Country' code for its country,
> > # E.g. 'Danmark/dk' versus 'Danish/da'.
> > #
> > # Note 3: In the case of 'ltz' we violate the RFC by using a three char
> > # specifier. There is 'work in progress' to fix this and get
> > # the reference data for rfc1766 cleaned up.
> > #
> > # Danish (da) - Dutch (nl) - English (en) - Estonian (et)
> > # French (fr) - German (de) - Greek-Modern (el)
> > # Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
> > # Portugese (pt) - Luxembourgeois* (ltz)
> > # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
> > # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
> > # Russian (ru) - Croatian (hr)
> > #
> > AddLanguage da .dk
> > AddLanguage nl .nl
> > AddLanguage en .en
> > AddLanguage et .et
> > AddLanguage fr .fr
> > AddLanguage de .de
> > AddLanguage he .he
> > AddLanguage el .el
> > AddLanguage it .it
> > AddLanguage ja .ja
> > AddLanguage pl .po
> > AddLanguage ko .ko
> > AddLanguage pt .pt
> > AddLanguage nn .nn
> > AddLanguage no .no
> > AddLanguage pt-br .pt-br
> > AddLanguage ltz .ltz
> > AddLanguage ca .ca
> > AddLanguage es .es
> > AddLanguage sv .sv
> > AddLanguage cs .cz .cs
> > AddLanguage ru .ru
> > AddLanguage zh-CN .zh-cn
> > AddLanguage zh-TW .zh-tw
> > AddLanguage hr .hr
> >
> > #
> > # LanguagePriority allows you to give precedence to some languages
> > # in case of a tie during content negotiation.
> > #
> > # Just list the languages in decreasing order of preference. We have
> > # more or less alphabetized them here. You probably want to change this.
> > #
> > LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es
sv
> > tw
> >
> > #
> > # ForceLanguagePriority allows you to serve a result page rather than
> > # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE
(Fallback)
> > # [in case no accepted languages matched the available variants]
> > #
> > ForceLanguagePriority Prefer Fallback
> >
> > #
> > # Specify a default charset for all pages sent out. This is
> > # always a good idea and opens the door for future internationalisation
> > # of your web site, should you ever want it. Specifying it as
> > # a default does little harm; as the standard dictates that a page
> > # is in iso-8859-1 (latin1) unless specified otherwise i.e. you
> > # are merely stating the obvious. There are also some security
> > # reasons in browsers, related to javascript and URL parsing
> > # which encourage you to always set a default char set.
> > #
> > AddDefaultCharset ISO-8859-1
> >
> > #
> > # Commonly used filename extensions to character sets. You probably
> > # want to avoid clashes with the language extensions, unless you
> > # are good at carefully testing your setup after each change.
> > # See http://www.iana.org/assignments/character-sets for the
> > # official list of charset names and their respective RFCs.
> > #
> > AddCharset ISO-8859-1  .iso8859-1  .latin1
> > AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
> > AddCharset ISO-8859-3  .iso8859-3  .latin3
> > AddCharset ISO-8859-4  .iso8859-4  .latin4
> > AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
> > AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
> > AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
> > AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
> > AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
> > AddCharset ISO-2022-JP .iso2022-jp .jis
> > AddCharset ISO-2022-KR .iso2022-kr .kis
> > AddCharset ISO-2022-CN .iso2022-cn .cis
> > AddCharset Big5        .Big5       .big5
> > # For russian, more than one charset is used (depends on client,
mostly):
> > AddCharset WINDOWS-1251 .cp-1251   .win-1251
> > AddCharset CP866       .cp866
> > AddCharset KOI8-r      .koi8-r .koi8-ru
> > AddCharset KOI8-ru     .koi8-uk .ua
> > AddCharset ISO-10646-UCS-2 .ucs2
> > AddCharset ISO-10646-UCS-4 .ucs4
> > AddCharset UTF-8       .utf8
> >
> > # The set below does not map to a specific (iso) standard
> > # but works on a fairly wide range of browsers. Note that
> > # capitalization actually matters (it should not, but it
> > # does for some browsers).
> > #
> > # See http://www.iana.org/assignments/character-sets
> > # for a list of sorts. But browsers support few.
> > #
> > AddCharset GB2312      .gb2312 .gb
> > AddCharset utf-7       .utf7
> > AddCharset utf-8       .utf8
> > AddCharset big5        .big5 .b5
> > AddCharset EUC-TW      .euc-tw
> > AddCharset EUC-JP      .euc-jp
> > AddCharset EUC-KR      .euc-kr
> > AddCharset shift_jis   .sjis
> >
> > #
> > # AddType allows you to add to or override the MIME configuration
> > # file mime.types for specific file types.
> > #
> > AddType application/x-tar .tgz
> > AddType image/x-icon .ico
> >
> > #
> > # AddHandler allows you to map certain file extensions to "handlers":
> > # actions unrelated to filetype. These can be either built into the
server
> > # or added with the Action directive (see below)
> > #
> > # To use CGI scripts outside of ScriptAliased directories:
> > # (You will also need to add "ExecCGI" to the "Options" directive.)
> > #
> > #AddHandler cgi-script .cgi
> >
> > #
> > # For files that include their own HTTP headers:
> > #
> > #AddHandler send-as-is asis
> >
> > #
> > # For server-parsed imagemap files:
> > #
> > #AddHandler imap-file map
> >
> > #
> > # For type maps (negotiated resources):
> > # (This is enabled by default to allow the Apache "It Worked" page
> > #  to be distributed in multiple languages.)
> > #
> > AddHandler type-map var
> >
> > #
> > # Filters allow you to process content before it is sent to the client.
> > #
> > # To parse .shtml files for server-side includes (SSI):
> > # (You will also need to add "Includes" to the "Options" directive.)
> > #
> > #AddType text/html .shtml
> > #AddOutputFilter INCLUDES .shtml
> >
> > #
> > # Action lets you define media types that will execute a script whenever
> > # a matching file is called. This eliminates the need for repeated URL
> > # pathnames for oft-used CGI file processors.
> > # Format: Action media/type /cgi-script/location
> > # Format: Action handler-name /cgi-script/location
> > #
> >
> > #
> > # Customizable error responses come in three flavors:
> > # 1) plain text 2) local redirects 3) external redirects
> > #
> > # Some examples:
> > #ErrorDocument 500 "The server made a boo boo."
> > #ErrorDocument 404 /missing.html
> > #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> > #ErrorDocument 402 http://www.example.com/subscription_info.html
> > #
> >
> > #
> > # Putting this all together, we can internationalize error responses.
> > #
> > # We use Alias to redirect any /error/HTTP_<error>.html.var response to
> > # our collection of by-error message multi-language collections.  We use
> > # includes to substitute the appropriate text.
> > #
> > # You can modify the messages' appearance without changing any of the
> > # default HTTP_<error>.html.var files by adding the line:
> > #
> > #   Alias /error/include/ "/your/include/path/"
> > #
> > # which allows you to create your own set of files by starting with the
> > # /usr/local/apache/error/include/ files and copying them to
> > /your/include/path/,
> > # even on a per-VirtualHost basis.  The default include files will
display
> > # your Apache version number and your ServerAdmin email address
regardless
> > # of the setting of ServerSignature.
> > #
> > # The internationalized error documents require mod_alias, mod_include
> > # and mod_negotiation.  To activate them, uncomment the following 30
lines.
> >
> > #    Alias /error/ "/usr/local/apache/error/"
> > #
> > #    <Directory "/usr/local/apache/error">
> > #        AllowOverride None
> > #        Options IncludesNoExec
> > #        AddOutputFilter Includes html
> > #        AddHandler type-map var
> > #        Order allow,deny
> > #        Allow from all
> > #        LanguagePriority en cs de es fr it nl sv pt-br ro
> > #        ForceLanguagePriority Prefer Fallback
> > #    </Directory>
> > #
> > #    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
> > #    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
> > #    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
> > #    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
> > #    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
> > #    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
> > #    ErrorDocument 410 /error/HTTP_GONE.html.var
> > #    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
> > #    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
> > #    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
> > #    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
> > #    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
> > #    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
> > #    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
> > #    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
> > #    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
> > #    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
> >
> > #
> > # The following directives modify normal HTTP response behavior to
> > # handle known problems with browser implementations.
> > #
> > BrowserMatch "Mozilla/2" nokeepalive
> > BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
> > BrowserMatch "RealPlayer 4\.0" force-response-1.0
> > BrowserMatch "Java/1\.0" force-response-1.0
> > BrowserMatch "JDK/1\.0" force-response-1.0
> >
> > #
> > # The following directive disables redirects on non-GET requests for
> > # a directory that does not include the trailing slash.  This fixes a
> > # problem with Microsoft WebFolders which does not appropriately handle
> > # redirects for folders with DAV methods.
> > # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
> > #
> > BrowserMatch "Microsoft Data Access Internet Publishing Provider"
> > redirect-carefully
> > BrowserMatch "^WebDrive" redirect-carefully
> > BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
> > BrowserMatch "^gnome-vfs" redirect-carefully
> >
> > #
> > # Allow server status reports generated by mod_status,
> > # with the URL of http://servername/server-status
> > # Change the ".example.com" to match your domain to enable.
> > #
> > #<Location /server-status>
> > #    SetHandler server-status
> > #    Order deny,allow
> > #    Deny from all
> > #    Allow from .example.com
> > #</Location>
> >
> > #
> > # Allow remote server configuration reports, with the URL of
> > #  http://servername/server-info (requires that mod_info.c be loaded).
> > # Change the ".example.com" to match your domain to enable.
> > #
> > #<Location /server-info>
> > #    SetHandler server-info
> > #    Order deny,allow
> > #    Deny from all
> > #    Allow from .example.com
> > #</Location>
> >
> > #
> > # Bring in additional module-specific configurations
> > #
> > <IfModule mod_ssl.c>
> >     Include conf/ssl.conf
> > </IfModule>
> >
> > ### Section 3: Virtual Hosts
> > #
> > # VirtualHost: If you want to maintain multiple domains/hostnames on
your
> > # machine you can setup VirtualHost containers for them. Most
configurations
> > # use only name-based virtual hosts so the server doesn't need to worry
> > about
> > # IP addresses. This is indicated by the asterisks in the directives
below.
> > #
> > # Please see the documentation at
> > # <URL:http://httpd.apache.org/docs-2.0/vhosts/>
> > # for further details before you try to setup virtual hosts.
> > #
> > # You may use the command line option '-S' to verify your virtual host
> > # configuration.
> >
> > #
> > # Use name-based virtual hosting.
> > #
> > NameVirtualHost *
> >
> > #
> > # VirtualHost example:
> > # Almost any Apache directive may go into a VirtualHost container.
> > # The first VirtualHost section is used for requests without a known
> > # server name.
> > #
> > #<VirtualHost *>
> > #    ServerAdmin webmaster@dummy-host.example.com
> > #    DocumentRoot /www/docs/dummy-host.example.com
> > #    ServerName dummy-host.example.com
> > #    ErrorLog logs/dummy-host.example.com-error_log
> > #    CustomLog logs/dummy-host.example.com-access_log common
> > #</VirtualHost>
> >
> > # 17-09-2003 Johan Louwers --> Johan.Louwers@verder.nl
> > # virtualhost www.verder.fr
> > # france website verder www.verder.fr
> > <VirtualHost *>
> >  ServerAdmin Johan.Louwers@verder.nl
> >  DocumentRoot /export/home/webroot/www.verder.fr
> >  ServerName www.verder.fr
> >  ErrorLog /export/home/weblog/error-log_www.verder.fr
> >  CustomLog /export/home/weblog/common-log_www.verder.fr common
> > </VirtualHost>
> >
> > # 17-09-2003 Johan Louwers --> Johan.Louwers@verder.nl
> > # virtualhost mnt.verder.fr
> > # mnt part of the france verder website.
> > <VirtualHost *>
> >  ServerAdmin Johan.Louwers@verder.nl
> >  DocumentRoot /export/home/webroot/mnt.verder.fr
> >  ServerName mnt.verder.fr
> >  ErrorLog /export/home/weblog/error-log_mnt.verder.fr
> >  CustomLog /export/home/weblog/common-log_mnt.verder.fr common
> > </VirtualHost>
> >
> > # 16-09-2003. Johan Louwers Johan.Louwers@verder.nl
> > # LoadModule mod_jk2.so inserted and activated to make apache http
deamon
> > # with jakarta tomcat both on port 80.
> > LoadModule jk2_module modules/mod_jk2.so
> >
> > # --------------END HTTPD.CONF------------------
> > ----- Original Message -----
> > From: "Luke Vanderfluit" <luke@chipcity.com.au>
> > To: "Johan Louwers" <Suntac@dds.nl>
> > Sent: Wednesday, September 17, 2003 10:31 PM
> > Subject: Re: vertial host apache/tomcat
> >
> > > Hi Johan,
> > >
> > > I don't know what your httpd.conf looks like,
> > > When using VirtualHost the first block must be the "main" domain,
> > > then your virtual domains.
> > >
> > > post your full httpd.conf
> > >
> > > kind regards,
> > > Luke
> > >
> > >
> > > On Wed, 2003-09-17 at 20:54, Johan Louwers wrote:
> > > > Ok, finaly have apache and tomcat running both on port 80.
> > > >
> > > > I have created the following dir's
> > > > /export/home/www.someserver.com
> > > > /export/home/mnt.someserver.com
> > > >
> > > > This will be the location of http://www.someserver.com  and
> > > > http://mnt.someserver.com
> > > >
> > > > To test I have placed a document named info_www.txt in
> > > > /export/home/www.someserver.com and placed info_mnt.txt in
> > > > /export/home/mnt.someserver.com I have created 2 vertiualhosts like
this
> > in
> > > > my httpd.conf:
> > > > _____________________________________
> > > > NameVirtualHost *
> > > >
> > > > <VirtualHost *>
> > > >     ServerAdmin Me@domain.com
> > > >     DocumentRoot/export/home/www.someserver.com
> > > >     ServerName www.someserver.com
> > > >     ErrorLog /export/home/log/errorlog-2
> > > >     CustomLog /export/home/log/customlog-2 custom
> > > > </VirtualHost>
> > > >
> > > > <VirtualHost *>
> > > >     ServerAdmin Me@domain.com
> > > >     DocumentRoot /export/home/mnt.someserver.com
> > > >     ServerName mnt.someserver.com
> > > >     ErrorLog /export/home/log/errorlog-1
> > > >     CustomLog /export/home/log/customlog-1 custom
> > > > </VirtualHost>
> > > > _____________________________________
> > > >
> > > > If  open www.someserver.com/www.txt this is correct and working Then
I
> > open
> > > > www.someserver.com/info_mnt.txt and this also opend. This should not
be
> > > > possible info_mnt.txt should only be availabale true the domain
> > > > mnt.someserver.com. How is it possible I also can open it true
> > > > www.someserver.com ?
> > > >
> > > > I also like to run jsp files under www.someserver.com and
> > mnt.someserver.com
> > > > ... people are not allowd to open documents from mnt in the www
> > part......
> > > > How do I change the webapps dirs and make them available under
> > > > http://mnt.someserver.com and http://www,someserver.com ?
> > > >
> > > > Thanks already,
> > > > Regards. Johan.
> > > >
> > > >
> > >
> ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> > > > For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
> > > --
> > > ====================================
> > > "when my computer smiles, I'm happy"
> > > ===============================.~ ~,
> > > Luke Vanderfluit               |'/']
> > > Mobile: 0421 276 282            \~/`
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> > For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tomcat-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: tomcat-user-help@jakarta.apache.org
>


Mime
View raw message