tomcat-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Aaron Chan" <aa...@accom.per.sg>
Subject RE: Apache2 - Tomcat4 Integration
Date Mon, 12 Aug 2002 01:29:00 GMT
Hi Mr Turner, John, 

	May I know if you have any links that have instruction on Apache
2 + Tomcat 4 in Windows environment. Because I am using Windows 2000
Server. Thanks in advance.

Aaron Chan
aaron@accom.per.sg
http://www.accom.per.sg


-----Original Message-----
From: Turner, John [mailto:JTurner@AAS.com] 
Sent: Friday, August 09, 2002 7:53 PM
To: 'Tomcat Users List'
Subject: RE: Apache2 - Tomcat4 Integration


Aw, shucks.

Any comments or suggestions you have towards making my HOWTO work with
both
apache 1.3 and apache 2.0 would be greatly appreciated. That goes for
tomcat
4.1.x beta comments as well.  I would be glad to add them to the
document.

John Turner
jturner@NOSPAM.aas.com


-----Original Message-----
From: Lou Fox [mailto:loufox@cloud9.net]
Sent: Thursday, August 08, 2002 4:44 PM
To: Tomcat Users List; borledge@rsimail.com
Subject: Re: Apache2 - Tomcat4 Integration


Have you gotten any help on this?  Last night I started on practically
the
same task, the only difference is that I'm using Tomcat4.18Beta (I hear
the
performance is far superior to any other tomcat version), anyway I found
this page that gives great instructions for  apache 1.3.26 / tomcat
4.0.4 /
mod_jk.  I'm going to try to follow the directions tonight.  I'm hoping
that
apache 1.3.26 is similar enough to apache 2, and tomcat 4.0.4 is similar
to
tomcat 4.1.8 beta.  Here's the link:

http://www.johnturner.com/howto/apache-tomcat-howto.html

Let me know how it goes and I'll do the same for you.  Good luck.

----- Original Message -----
From: "Brian Orledge" <borledge@rsimail.com>
To: <tomcat-user@jakarta.apache.org>
Sent: Thursday, August 08, 2002 12:06 PM
Subject: Apache2 - Tomcat4 Integration


> Hello,
>
> I have spent over 3 days trying to integrate Apache2  and Tomcat4.0.3
on
> RH 7.2.  Standalone tomcat works fine.  I am using mod_jk2.so.  When I
> try to request a jsp page from Apache, I notice 2 main errors :
>
> In apache2/log/error.log :  [error] ajp14.service() error sending,
retry
> on new endpoint tomcat1
> The page returned is "Apache Tomcat/4.0.3 - HTTP Status 500 - No
Context
> configured to process this request"
>
> I am trying to access a page
> /usr/local/jakarta-tomcat-4.0.3/webapps/examples/jsp/dates/date.jsp
> through the url http://localhost/examples/jsp/dates/date.jsp
>
> Thanks in advance.
>
> Brian Orledge
> Revenue Solutions, Inc.
> 301.240.2182
>
>
> My config files follow :
>
> Server.xml:
>
> <!-- Example Server Configuration File -->
> <!-- Note that component elements are nested corresponding to their
>      parent-child relationships with each other -->
>
> <!-- A "Server" is a singleton element that represents the entire JVM,
>      which may contain one or more "Service" instances.  The Server
>      listens for a shutdown command on the indicated port.
>
>      Note:  A "Server" is not itself a "Container", so you may not
>      define subcomponents such as "Valves" or "Loggers" at this level.
>  -->
> <Server port="8005" shutdown="SHUTDOWN" debug="99">
>
>   <!-- A "Service" is a collection of one or more "Connectors" that
> share
>        a single "Container" (and therefore the web applications
visible
>        within that Container).  Normally, that Container is an
"Engine",
>        but this is not required.
>
>        Note:  A "Service" is not itself a "Container", so you may not
>        define subcomponents such as "Valves" or "Loggers" at this
level.
>    -->
>
>   <!-- Define the Tomcat Stand-Alone Service -->
>   <Service name="Tomcat-Standalone">
>
>     <!-- A "Connector" represents an endpoint by which requests are
> received
>          and responses are returned.  Each Connector passes requests
on
> to the
>          associated "Container" (normally an Engine) for processing.
>
>          By default, a non-SSL HTTP/1.1 Connector is established on
port
> 8080.
>          You can also enable an SSL HTTP/1.1 Connector on port 8443 by
>          following the instructions below and uncommenting the second
> Connector
>          entry.  SSL support requires the following steps (see the SSL
> Config
>          HOWTO in the Tomcat 4.0 documentation bundle for more
detailed
>          instructions):
>          * Download and install JSSE 1.0.2 or later, and put the JAR
> files
>            into "$JAVA_HOME/jre/lib/ext".
>          * Execute:
>              %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA
> (Windows)
>              $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA
> (Unix)
>            with a password value of "changeit" for both the
certificate
> and
>            the keystore itself.
>
>          By default, DNS lookups are enabled when a web application
> calls
>          request.getRemoteHost().  This can have an adverse impact on
>          performance, so you can disable it by setting the
>          "enableLookups" attribute to "false".  When DNS lookups are
> disabled,
>          request.getRemoteHost() will return the String version of the
>          IP address of the remote client.
>     -->
>
>     <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
>     <Connector
> className="org.apache.catalina.connector.http.HttpConnector"
>                port="8080" tomcatAuthentication="false"
> minProcessors="5" maxProcessors="75"
>                enableLokups="true" debug="99"
> connectionTimeout="60000"/>
>     <!-- Note : To disable connection timeouts, set connectionTimeout
> value
>      to -1 -->
>
>     <!-- Define an SSL HTTP/1.1 Connector on port 8443 -->
>     <!--
>     <Connector
> className="org.apache.catalina.connector.http.HttpConnector"
>                port="8443" tomcatAuthentication = "false"
> minProcessors="5" maxProcessors="75"
>                enableLookups="true"
>                    acceptCount="10" debug="0" scheme="https"
> secure="true">
>       <Factory
> className="org.apache.catalina.net.SSLServerSocketFactory"
>                clientAuth="false" protocol="TLS"/>
>     </Connector>
>     -->
>
>     <!-- Define a Proxied HTTP/1.1 Connector on port 8081 -->
>     <!-- See proxy documentation for more information about using
this.
> -->
>     <!--
>     <Connector
> className="org.apache.catalina.connector.http.HttpConnector"
>                port="8081"  tomcatAuthentication = "false"
> minProcessors="5" maxProcessors="75"
>                enableLookups="true"
>                acceptCount="10" debug="99" connectionTimeout="60000"
>                proxyPort="80"/>
>     -->
>
>     <!-- Define a Proxied HTTP/1.1 Connector on port 8081 -->
>     <!-- See proxy documentation for more information about using
this.
> -->
>     <!--
>     <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>                port="8081"  minProcessors="5" maxProcessors="75"
>                enableLookups="true" redirectPort="8443"
>                acceptCount="10" debug="99" connectionTimeout="20000"
>
> protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
>     -->
>
>     <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8082 -->
>     <!--
>     <Connector
> className="org.apache.catalina.connector.http10.HttpConnector"
>                port="8082"  tomcatAuthentication = "false"
> minProcessors="5" maxProcessors="75"
>                enableLookups="true" redirectPort="8443"
>                acceptCount="10" debug="0"/>
>     -->
>
>     <!-- An Engine represents the entry point (within Catalina) that
> processes
>          every request.  The Engine implementation for Tomcat stand
> alone
>          analyzes the HTTP headers included with the request, and
passes
> them
>          on to the appropriate Host (virtual host). -->
>
>     <!-- Define the top level container in our container hierarchy -->
>     <Engine name="Standalone" defaultHost="localhost" debug="99">
>
>       <!-- The request dumper valve dumps useful debugging information
> about
>            the request headers and cookies that were received, and the
> response
>            headers and cookies that were sent, for all requests
received
> by
>            this instance of Tomcat.  If you care only about requests
to
> a
>            particular virtual host, or a particular application, nest
> this
>            element inside the corresponding <Host> or <Context> entry
> instead.
>
>            For a similar mechanism that is portable to all Servlet 2.3
>            containers, check out the "RequestDumperFilter" Filter in
the
>            example application (the source for this filter may be
found
> in
>            "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
>
>            Request dumping is disabled by default.  Uncomment the
> following
>            element to enable it. -->
>       <!--
>       <Valve
className="org.apache.catalina.valves.RequestDumperValve"/>
>       -->
>
>       <!-- Global logger unless overridden at lower levels -->
>       <Logger className="org.apache.catalina.logger.FileLogger"
>               prefix="catalina_log." suffix=".txt"
>               timestamp="true"/>
>
>       <!-- Because this Realm is here, an instance will be shared
> globally -->
>
>       <Realm className="org.apache.catalina.realm.MemoryRealm" />
>
>       <!-- Replace the above Realm with one of the following to get a
> Realm
>            stored in a database and accessed via JDBC -->
>
>       <!--
>       <Realm  className="org.apache.catalina.realm.JDBCRealm"
debug="99"
>              driverName="org.gjt.mm.mysql.Driver"
>
>
connectionURL="jdbc:mysql://localhost/authority?user=test;password=test"
>               userTable="users" userNameCol="user_name"
> userCredCol="user_pass"
>           userRoleTable="user_roles" roleNameCol="role_name" />
>       -->
>
>       <!--
>       <Realm  className="org.apache.catalina.realm.JDBCRealm"
debug="99"
>              driverName="oracle.jdbc.driver.OracleDriver"
>
>
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL?user=scott;password=
> tiger"
>               userTable="users" userNameCol="user_name"
> userCredCol="user_pass"
>           userRoleTable="user_roles" roleNameCol="role_name" />
>       -->
>
>       <!--
>       <Realm  className="org.apache.catalina.realm.JDBCRealm"
debug="99"
>              driverName="sun.jdbc.odbc.JdbcOdbcDriver"
>           connectionURL="jdbc:odbc:CATALINA"
>               userTable="users" userNameCol="user_name"
> userCredCol="user_pass"
>           userRoleTable="user_roles" roleNameCol="role_name" />
>       -->
>
>       <!-- Define the default virtual host -->
>       <Host name="localhost" debug="99" appBase="webapps"
> unpackWARs="true">
>
>         <!-- Normally, users must authenticate themselves to each web
> app
>              individually.  Uncomment the following entry if you would
> like
>              a user to be authenticated the first time they encounter
a
>              resource protected by a security constraint, and then
have
> that
>              user identity maintained across *all* web applications
> contained
>              in this virtual host. -->
>         <!--
>         <Valve
> className="org.apache.catalina.authenticator.SingleSignOn"
>                    debug="99"/>
>         -->
>
>         <!-- Access log processes all requests for this virtual host.
> By
>              default, log files are created in the "logs" directory
> relative to
>              $CATALINA_HOME.  If you wish, you can specify a different
>              directory with the "directory" attribute.  Specify either
a
> relative
>              (to $CATALINA_HOME) or absolute path to the desired
> directory.
>         -->
>         <Valve className="org.apache.catalina.valves.AccessLogValve"
>                  directory="logs"  prefix="localhost_access_log."
> suffix=".txt"
>                  pattern="common"/>
>
>         <!-- Logger shared by all Contexts related to this virtual
host.
> By
>              default (when using FileLogger), log files are created in
> the "logs"
>              directory relative to $CATALINA_HOME.  If you wish, you
can
> specify
>              a different directory with the "directory" attribute.
> Specify either a
>              relative (to $CATALINA_HOME) or absolute path to the
> desired
>              directory.-->
>         <Logger className="org.apache.catalina.logger.FileLogger"
>                  directory="logs"  prefix="localhost_log."
suffix=".txt"
>                     timestamp="true"/>
>
>         <!-- Define properties for each web application.  This is only
> needed
>              if you want to set non-default properties, or have web
> application
>              document roots in places other than the virtual host's
> appBase
>              directory.  -->
>
>
>         <!-- Tomcat Root Context -->
>         <!--
>         <Context path="/ROOT/borledge" docBase="borledge" debug="99"/>
>         -->
>
>         <!-- Tomcat Manager Context -->
>         <Context path="/manager" docBase="manager"
>          debug="99" privileged="true"/>
>
>         <!-- Tomcat Examples Context -->
>         <Context path="/examples" docBase="examples" debug="99"
>                  reloadable="true" crossContext="true">
>           <Logger className="org.apache.catalina.logger.FileLogger"
>                      prefix="localhost_examples_log." suffix=".txt"
>               timestamp="true"/>
>           <Ejb   name="ejb/EmplRecord" type="Entity"
>                  home="com.wombat.empl.EmployeeRecordHome"
>                remote="com.wombat.empl.EmployeeRecord"/>
>           <!-- PersistentManager: Uncomment the section below to test
> Persistent
>                                Sessions.
>
>                saveOnRestart: If true, all active sessions will be
saved
>                  to the Store when Catalina is shutdown, regardless of
>                  other settings. All Sessions found in the Store will
be
>
>                  loaded on startup. Sessions past their expiration are
>                  ignored in both cases.
>                maxActiveSessions: If 0 or greater, having too many
> active
>                  sessions will result in some being swapped out.
> minIdleSwap
>                  limits this. -1 means unlimited sessions are allowed.
>                  0 means sessions will almost always be swapped out
> after
>                  use - this will be noticeably slow for your users.
>                minIdleSwap: Sessions must be idle for at least this
long
>                  (in seconds) before they will be swapped out due to
>                maxActiveSessions. This avoids thrashing when the site
is
>
>                  highly active. -1 or 0 means there is no minimum -
> sessions
>                  can be swapped out at any time.
>                maxIdleSwap: Sessions will be swapped out if idle for
> this
>                  long (in seconds). If minIdleSwap is higher, then it
> will
>                  override this. This isn't exact: it is checked
> periodically.
>                  -1 means sessions won't be swapped out for this
reason,
>                  although they may be swapped out for
maxActiveSessions.
>                  If set to >= 0, guarantees that all sessions found in
> the
>                  Store will be loaded on startup.
>                maxIdleBackup: Sessions will be backed up (saved to the
> Store,
>                  but left in active memory) if idle for this long (in
> seconds),
>                  and all sessions found in the Store will be loaded on
> startup.
>                  If set to -1 sessions will not be backed up, 0 means
> they
>                  should be backed up shortly after being used.
>
>                To clear sessions from the Store, set
maxActiveSessions,
> maxIdleSwap,
>                and minIdleBackup all to -1, saveOnRestart to false,
then
> restart
>                Catalina.
>           -->
>                           <!--
>           <Manager
> className="org.apache.catalina.session.PersistentManager"
>               debug="99"
>               saveOnRestart="true"
>               maxActiveSessions="-1"
>               minIdleSwap="-1"
>               maxIdleSwap="-1"
>               maxIdleBackup="-1">
>                 <Store
> className="org.apache.catalina.session.FileStore"/>
>           </Manager>
>                           -->
>           <Environment name="maxExemptions" type="java.lang.Integer"
>                       value="15"/>
>           <Parameter name="context.param.name"
> value="context.param.value"
>                      override="false"/>
>           <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
>                     type="javax.sql.DataSource"/>
>           <ResourceParams name="jdbc/EmployeeAppDb">
>             <parameter><name>user</name><value>sa</value></parameter>
>
<parameter><name>password</name><value></value></parameter>
>             <parameter><name>driverClassName</name>
>               <value>org.hsql.jdbcDriver</value></parameter>
>             <parameter><name>driverName</name>
>               <value>jdbc:HypersonicSQL:database</value></parameter>
>           </ResourceParams>
>           <Resource name="mail/Session" auth="Container"
>                     type="javax.mail.Session"/>
>           <ResourceParams name="mail/Session">
>             <parameter>
>               <name>mail.smtp.host</name>
>               <value>localhost</value>
>             </parameter>
>           </ResourceParams>
>         </Context>
>
>       </Host>
>
>     </Engine>
>
>   </Service>
>
>   <!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with
> Tomcat 4.0
>        as its servlet container. Please read the README.txt file
coming
> with
>        the WebApp Module distribution on how to build it.
>        (Or check out the "jakarta-tomcat-connectors/webapp" CVS
> repository)
>
>        To configure the Apache side, you must ensure that you have the
>        "ServerName" and "Port" directives defined in "httpd.conf".
> Then,
>        lines like these to the bottom of your "httpd.conf" file:
>
>          LoadModule webapp_module libexec/mod_webapp.so
>          WebAppConnection warpConnection warp localhost:8008
>          WebAppDeploy examples warpConnection /examples/
>
>        The next time you restart Apache (after restarting Tomcat, if
> needed)
>        the connection will be established, and all applications you
make
>        visible via "WebAppDeploy" directives can be accessed through
> Apache.
>   -->
>
>   <Service name="Tomcat-Apache">
>
>     <!-- Define a non-SSL HTTP/1.1 Connector on port 8009 -->
>     <!-- This implementation supports the AJP 1.3 and 1.4 protocols
-->
>     <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
>                port="8009" minProcessors="5" maxProcessors="75"
>                enableLookups="true" redirectPort="8443"
>                debug="99" acceptCount="10" connectionTimeout="20000"
>
> ProtocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler" />
>
>     <Engine className="org.apache.catalina.connector.warp.WarpEngine"
>         name="Apache" debug="99">
>
>      <!--
>       <Logger className="org.apache.catalina.logger.FileLogger"
>                prefix="apache_log." suffix=".txt"
>            timestamp="true"/>
>      -->
>
>       <Realm className="org.apache.catalina.realm.MemoryRealm" />
>
>       <Host name="localhost" debug="99" appBase="webapps"
> unpackWARs="true">
>         <Context
path="/usr/local/jakarta-tomcat-4.0.3/webapps/examples"
> docBase="examples" debug="99"
>                  reloadable="true" crossContext="true"/>
>       </Host>
>
>     </Engine>
>   </Service>
> </Server>
>
>
> workers.properties :
>
> workers.tomcat_home=/usr/local/jakarta-tomcat-4.0.3
> workers.java_home=/usr/local/j2sdk1.4.0
> worker.list=tomcat1
>
> worker.tomcat1.port=8009
> worker.tomcat1.host=localhost
> worker.tomcat1.type=ajp14
>
>
> jk2.properties :
>
> ## THIS FILE MAY BE OVERRIDEN AT RUNTIME. MAKE SURE TOMCAT IS STOPED
> ## WHEN YOU EDIT THE FILE.
> ## COMMENTS WILL BE _LOST_
> ## DOCUMENTATION OF THE FORMAT IN JkMain javadoc.
> # Override the default port for the socketChannel
> channelSocket.port=8019
> # Default:
> channelUnix.file=${jkHome}/work/jk2.socket
> # Just to check if the the config  is working
> shm.file=/tmp/jk2.shm
>
>
>
> Mod_jk.conf :
>
> LoadModule jk_module modules/mod_jk2.so
>
> JkWorkersFile /usr/local/apache2/conf/workers.properties
>
> JkLogFile /usr/local/jakarta-tomcat-4.0.3/logs/mod_jk.log
> JkLogLevel debug
>
> JkMount /*.jsp                         tomcat1
> JkMount /servlet/*      tomcat1
>
> Alias /examples/tomcat
/usr/local/jakarta-tomcat-4.0.3/webapps/examples
>
> <Directory "/usr/local/jakarta-tomcat-4.0.3/webapps/examples">
>   Options Indexes FollowSymLinks
> </Directory>
>
> JkMount /examples/tomcat/servlet/*      tomcat1
> JkMount /examples/tomcat/*.jsp      tomcat1
>
> <Location "/examples/tomcat/META-INF/">
>   AllowOverride None
>   deny from all
> </Location>
>
>
>
>
>
> httpd.conf :
>
> #
> # Based upon the NCSA server configuration files originally by Rob
> McCool.
> #
> # This is the main Apache server configuration file.  It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information
> about
> # the directives.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do.  They're here only as hints or reminders.  If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # The configuration directives are grouped into three basic sections:
> #  1. Directives that control the operation of the Apache server
process
> as a
> #     whole (the 'global environment').
> #  2. Directives that define the parameters of the 'main' or 'default'
> server,
> #     which responds to requests that aren't handled by a virtual
host.
> #     These directives also provide default values for the settings
> #     of all virtual hosts.
> #  3. Settings for virtual hosts, which allow Web requests to be sent
to
> #     different IP addresses or hostnames and have them handled by the
> #     same Apache server process.
> #
> # Configuration and logfile names: If the filenames you specify for
many
> # of the server's control files begin with "/" (or "drive:/" for
Win32),
> the
> # server will use that explicit path.  If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "/usr/local/apache2" will be interpreted by
the
> # server as "/usr/local/apache2/logs/foo.log".
> #
>
> ### Section 1: Global Environment
> #
> # The directives in this section affect the overall operation of
Apache,
> # such as the number of concurrent requests it can handle or where it
> # can find its configuration files.
> #
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # NOTE!  If you intend to place this on an NFS (or otherwise network)
> # mounted filesystem then please read the LockFile documentation
> # (available at
> <URL:http://httpd.apache.org/docs-2.0/mod/core.html#lockfile>);
> # you will save yourself a lot of trouble.
> #
> # Do NOT add a slash at the end of the directory path.
> #
> ServerRoot "/usr/local/apache2"
>
> #
> # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
> #
> <IfModule !mpm_winnt.c>
> <IfModule !mpm_netware.c>
> #LockFile logs/accept.lock
> </IfModule>
> </IfModule>
>
> #
> # ScoreBoardFile: File used to store internal server process
> information.
> # If unspecified (the default), the scoreboard will be stored in an
> # anonymous shared memory segment, and will be unavailable to
> third-party
> # applications.
> # If specified, ensure that no two invocations of Apache share the
same
> # scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
> #
> <IfModule !mpm_netware.c>
> <IfModule !perchild.c>
> #ScoreBoardFile logs/apache_runtime_status
> </IfModule>
> </IfModule>
>
>
> #
> # PidFile: The file in which the server should record its process
> # identification number when it starts.
> #
> <IfModule !mpm_netware.c>
> PidFile logs/httpd.pid
> </IfModule>
>
> #
> # Timeout: The number of seconds before receives and sends time out.
> #
> Timeout 300
>
> #
> # KeepAlive: Whether or not to allow persistent connections (more than
> # one request per connection). Set to "Off" to deactivate.
> #
> KeepAlive On
>
> #
> # MaxKeepAliveRequests: The maximum number of requests to allow
> # during a persistent connection. Set to 0 to allow an unlimited
amount.
> # We recommend you leave this number high, for maximum performance.
> #
> MaxKeepAliveRequests 100
>
> #
> # KeepAliveTimeout: Number of seconds to wait for the next request
from
> the
> # same client on the same connection.
> #
> KeepAliveTimeout 15
>
> ##
> ## Server-Pool Size Regulation (MPM specific)
> ##
>
> # prefork MPM
> # StartServers: number of server processes to start
> # MinSpareServers: minimum number of server processes which are kept
> spare
> # MaxSpareServers: maximum number of server processes which are kept
> spare
> # MaxClients: maximum number of server processes allowed to start
> # MaxRequestsPerChild: maximum number of requests a server process
> serves
> <IfModule prefork.c>
> StartServers         5
> MinSpareServers      5
> MaxSpareServers     10
> MaxClients         150
> MaxRequestsPerChild  0
> </IfModule>
>
> # worker MPM
> # StartServers: initial number of server processes to start
> # MaxClients: maximum number of simultaneous client connections
> # MinSpareThreads: minimum number of worker threads which are kept
spare
> # MaxSpareThreads: maximum number of worker threads which are kept
spare
> # ThreadsPerChild: constant number of worker threads in each server
> process
> # MaxRequestsPerChild: maximum number of requests a server process
> serves
> <IfModule worker.c>
> StartServers         2
> MaxClients         150
> MinSpareThreads     25
> MaxSpareThreads     75
> ThreadsPerChild     25
> MaxRequestsPerChild  0
> </IfModule>
>
> # perchild MPM
> # NumServers: constant number of server processes
> # StartThreads: initial number of worker threads in each server
process
> # MinSpareThreads: minimum number of worker threads which are kept
spare
> # MaxSpareThreads: maximum number of worker threads which are kept
spare
> # MaxThreadsPerChild: maximum number of worker threads in each server
> process
> # MaxRequestsPerChild: maximum number of connections per server
process
> <IfModule perchild.c>
> NumServers           5
> StartThreads         5
> MinSpareThreads      5
> MaxSpareThreads     10
> MaxThreadsPerChild  20
> MaxRequestsPerChild  0
> </IfModule>
>
> # WinNT MPM
> # ThreadsPerChild: constant number of worker threads in the server
> process
> # MaxRequestsPerChild: maximum  number of requests a server process
> serves
> <IfModule mpm_winnt.c>
> ThreadsPerChild 250
> MaxRequestsPerChild  0
> </IfModule>
>
> # BeOS MPM
> # StartThreads: how many threads do we initially spawn?
> # MaxClients:   max number of threads we can have (1 thread == 1
client)
> # MaxRequestsPerThread: maximum number of requests each thread will
> process
> <IfModule beos.c>
> StartThreads               10
> MaxClients                 50
> MaxRequestsPerThread       10000
> </IfModule>
>
> # NetWare MPM
> # ThreadStackSize: Stack size allocated for each worker thread
> # StartThreads: Number of worker threads launched at server startup
> # MinSpareThreads: Minimum number of idle threads, to handle request
> spikes
> # MaxSpareThreads: Maximum number of idle threads
> # MaxThreads: Maximum number of worker threads alive at the same time
> # MaxRequestsPerChild: Maximum  number of requests a thread serves. It
> is
> #                      recommended that the default value of 0 be set
> for this
> #                      directive on NetWare.  This will allow the
thread
> to
> #                      continue to service requests indefinitely.
>
> <IfModule mpm_netware.c>
> ThreadStackSize      65536
> StartThreads           250
> MinSpareThreads         25
> MaxSpareThreads        250
> MaxThreads            1000
> MaxRequestsPerChild      0
> </IfModule>
>
> # OS/2 MPM
> # StartServers: Number of server processes to maintain
> # MinSpareThreads: Minimum number of idle threads per process,
> #                  to handle request spikes
> # MaxSpareThreads: Maximum number of idle threads per process
> # MaxRequestsPerChild: Maximum number of connections per server
process
> <IfModule mpmt_os2.c>
> StartServers           2
> MinSpareThreads        5
> MaxSpareThreads       10
> MaxRequestsPerChild    0
> </IfModule>
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, in addition to the default. See also the <VirtualHost>
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
> #
> #Listen 12.34.56.78:80
> Listen 80
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a
> DSO you
> # have to place corresponding `LoadModule' lines at this location so
the
> # directives contained in it are actually available _before_ they are
> used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
>
> #
> # ExtendedStatus controls whether Apache will generate "full" status
> # information (ExtendedStatus On) or just basic information
> (ExtendedStatus
> # Off) when the "server-status" handler is called. The default is Off.
> #
> #ExtendedStatus On
>
> ### Section 2: 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition.  These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> <IfModule !mpm_winnt.c>
> <IfModule !mpm_netware.c>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> #  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
> #  . On HPUX you may not be able to use shared memory as nobody, and
the
> #    suggested workaround is to create a user www and use that user.
> #  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
> #  when the value of (unsigned)Group is above 60000;
> #  don't use Group #-1 on these systems!
> #
> User nobody
> Group #-1
> </IfModule>
> </IfModule>
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed.  This address appears on some server-generated pages, such
> # as error documents.  e.g. admin@your-domain.com
> #
> #ServerAdmin you@your.address
> ServerAdmin cmarakas@rsimail.com
> #
> # ServerName gives the name and port that the server uses to identify
> itself.
> # This can often be determined automatically, but we recommend you
> specify
> # it explicitly to prevent problems during startup.
> #
> # If this is not set to valid DNS name for your host, server-generated
> # redirections will not work.  See also the UseCanonicalName
directive.
> #
> # If your host doesn't have a registered DNS name, enter its IP
address
> here.
> # You will have to access it by its address anyway, and this will make
> # redirections work in a sensible way.
> #
> #ServerName new.host.name:80
> ServerName 64.209.95.250:80
> #
> # UseCanonicalName: Determines how Apache constructs self-referencing
> # URLs and the SERVER_NAME and SERVER_PORT variables.
> # When set "Off", Apache will use the Hostname and Port supplied
> # by the client.  When set "On", Apache will use the value of the
> # ServerName directive.
> #
> UseCanonicalName Off
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory,
but
> # symbolic links and aliases may be used to point to other locations.
> #
> #DocumentRoot "/usr/local/apache2/htdocs"
> DocumentRoot "/webs/web1.2"
> #
> # Each directory to which Apache has access can be configured with
> respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # features.
> #
> <Directory />
>     Options FollowSymLinks
>     AllowOverride None
> </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
> #<Directory "/usr/local/apache2/htdocs">
> <Directory "/webs/web1.2">
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> Multiviews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important.  Please see
> # http://httpd.apache.org/docs-2.0/mod/core.html#options
> # for more information.
> #
>     Options Indexes FollowSymLinks
>
> #
> # AllowOverride controls what directives may be placed in .htaccess
> files.
> # It can be "All", "None", or any combination of the keywords:
> #   Options FileInfo AuthConfig Limit
> #
>     AllowOverride All
>     IndexOptions FancyIndexing
> #
> # Controls who can get stuff from this server.
> #
>     Order allow,deny
>     Allow from all
>
> </Directory>
>
> #
> # UserDir: The name of the directory that is appended onto a user's
home
> # directory if a ~user request is received.
> #
> #UserDir public_html
> UserDir /home/sandbox/*
> #
> # Control access to UserDir directories.  The following is an example
> # for a site where these directories are restricted to read-only.
> #
> #<Directory /home/*/public_html>
> #    AllowOverride FileInfo AuthConfig Limit
> #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> #    <Limit GET POST OPTIONS PROPFIND>
> #        Order allow,deny
> #        Allow from all
> #    </Limit>
> #    <LimitExcept GET POST OPTIONS PROPFIND>
> #        Order deny,allow
> #        Deny from all
> #    </LimitExcept>
> #</Directory>
> <Directory /home/sandbox/*>
>       Options Indexes
>       IndexOptions FancyIndexing
>       AllowOverride All
> #    AllowOverride FileInfo AuthConfig Limit
> #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> #    <Limit GET POST OPTIONS PROPFIND>
> #        Order allow,deny
> #        Allow from all
> #    </Limit>
> #    <LimitExcept GET POST OPTIONS PROPFIND>
> #        Order deny,allow
> #        Deny from all
> #    </LimitExcept>
> </Directory>
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
> # The index.html.var file (a type-map) is used to deliver content-
> # negotiated documents.  The MultiViews Option can be used for the
> # same purpose, but it is much slower.
> #
> DirectoryIndex index.html index.html.var index.htm
> #
> # AccessFileName: The name of the file to look for in each directory
> # for additional configuration directives.  See also the AllowOverride
> # directive.
> #
> AccessFileName .htaccess
>
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients.
> #
> <Files ~ "^\.ht">
>     Order allow,deny
>     Deny from all
> </Files>
>
> #
> # TypesConfig describes where the mime.types file (or equivalent) is
> # to be found.
> #
> TypesConfig conf/mime.types
>
> #
> # DefaultType is the default MIME type the server will use for a
> document
> # if it cannot otherwise determine one, such as from filename
> extensions.
> # If your server contains mostly text or HTML documents, "text/plain"
is
> # a good value.  If most of your content is binary, such as
applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> #
> # The mod_mime_magic module allows the server to use various hints
from
> the
> # contents of the file itself to determine its type.  The
MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> #
> <IfModule mod_mime_magic.c>
>     MIMEMagicFile conf/magic
> </IfModule>
>
> #
> # HostnameLookups: Log the names of clients or just their IP addresses
> # e.g., www.apache.org (on) or 204.62.129.132 (off).
> # The default is off because it'd be overall better for the net if
> people
> # had to knowingly turn this feature on, since enabling it means that
> # each client request will result in AT LEAST one lookup request to
the
> # nameserver.
> #
> HostnameLookups Off
>
> #
> # EnableMMAP: Control whether memory-mapping is used to deliver
> # files (assuming that the underlying OS supports it).
> # The default is on; turn this off if you serve from NFS-mounted
> # filesystems.  On some systems, turning it off (regardless of
> # filesystem) can improve performance; for details, please see
> # http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
> #
> # EnableMMAP off
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here.  If you *do* define an error logfile for a
<VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog logs/error_log
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel debug
>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\""
> combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
> LogFormat "%{Referer}i -> %U" referer
> LogFormat "%{User-agent}i" agent
>
> #
> # The location and format of the access logfile (Common Logfile
Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here.  Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog logs/access_log common
>
> #
> # If you would like to have agent and referer logfiles, uncomment the
> # following directives.
> #
> #CustomLog logs/referer_log referer
> #CustomLog logs/agent_log agent
>
> #
> # If you prefer a single logfile with access, agent, and referer
> information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog logs/access_log combined
>
> #
> # Optionally add a line containing the server version and virtual host
> # name to server-generated pages (error documents, FTP directory
> listings,
> # mod_status and mod_info output etc., but not CGI generated
documents).
> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
> # Set to one of:  On | Off | EMail
> #
> ServerSignature On
>
> #
> # Aliases: Add here as many aliases as you need (with no limit). The
> format is
> # Alias fakename realname
> #
> # Note that if you include a trailing / on fakename then the server
will
> # require it to be present in the URL.  So "/icons" isn't aliased in
> this
> # example, only "/icons/".  If the fakename is slash-terminated, then
> the
> # realname must also be slash terminated, and if the fakename omits
the
> # trailing slash, the realname must also omit it.
> #
> # We include the /icons/ alias for FancyIndexed directory listings.
If
> you
> # do not use FancyIndexing, you may comment this out.
> #
> Alias /icons/ "/usr/local/apache2/icons/"
>
> <Directory "/usr/local/apache2/icons">
>     Options Indexes MultiViews
>     AllowOverride None
>     Order allow,deny
>     Allow from all
> </Directory>
>
> #
> # This should be changed to the ServerRoot/manual/.  The alias
provides
> # the manual, even if you choose to move your DocumentRoot.  You may
> comment
> # this out if you do not care for the documentation.
> #
> Alias /manual "/usr/local/apache2/manual"
>
> <Directory "/usr/local/apache2/manual">
>     Options Indexes FollowSymLinks MultiViews IncludesNoExec
>     AddOutputFilter Includes html
>     AllowOverride None
>     Order allow,deny
>     Allow from all
> </Directory>
>
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the realname directory are treated as applications and
> # run by the server when requested rather than as documents sent to
the
> client.
> # The same rules about trailing "/" apply to ScriptAlias directives as
> to
> # Alias.
> #
> ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
>
> <IfModule mod_cgid.c>
> #
> # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
> # for setting UNIX socket for communicating with cgid.
> #
> #Scriptsock            logs/cgisock
> </IfModule>
>
> #
> # "/usr/local/apache2/cgi-bin" should be changed to whatever your
> ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "/usr/local/apache2/cgi-bin">
>     AllowOverride None
>     Options None
>     Order allow,deny
>     Allow from all
> </Directory>
>
> #
> # Redirect allows you to tell clients about documents which used to
> exist in
> # your server's namespace, but do not anymore. This allows you to tell
> the
> # clients where to look for the relocated document.
> # Example:
> # Redirect permanent /foo http://www.example.com/bar
>
> #
> # Directives controlling the display of server-generated directory
> listings.
> #
>
> #
> # IndexOptions: Controls the appearance of server-generated directory
> # listings.
> #
> IndexOptions FancyIndexing VersionSort
>
> #
> # AddIcon* directives tell the server which icon to show for different
> # files or filename extensions.  These are only displayed for
> # FancyIndexed directories.
> #
> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>
> AddIconByType (TXT,/icons/text.gif) text/*
> AddIconByType (IMG,/icons/image2.gif) image/*
> AddIconByType (SND,/icons/sound2.gif) audio/*
> AddIconByType (VID,/icons/movie.gif) video/*
>
> AddIcon /icons/binary.gif .bin .exe
> AddIcon /icons/binhex.gif .hqx
> AddIcon /icons/tar.gif .tar
> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
> AddIcon /icons/a.gif .ps .ai .eps
> AddIcon /icons/layout.gif .html .shtml .htm .pdf
> AddIcon /icons/text.gif .txt
> AddIcon /icons/c.gif .c
> AddIcon /icons/p.gif .pl .py
> AddIcon /icons/f.gif .for
> AddIcon /icons/dvi.gif .dvi
> AddIcon /icons/uuencoded.gif .uu
> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
> AddIcon /icons/tex.gif .tex
> AddIcon /icons/bomb.gif core
>
> AddIcon /icons/back.gif ..
> AddIcon /icons/hand.right.gif README
> AddIcon /icons/folder.gif ^^DIRECTORY^^
> AddIcon /icons/blank.gif ^^BLANKICON^^
>
> #
> # DefaultIcon is which icon to show for files which do not have an
icon
> # explicitly set.
> #
> DefaultIcon /icons/unknown.gif
>
> #
> # AddDescription allows you to place a short description after a file
in
> # server-generated indexes.  These are only displayed for FancyIndexed
> # directories.
> # Format: AddDescription "description" filename
> #
> #AddDescription "GZIP compressed document" .gz
> #AddDescription "tar archive" .tar
> #AddDescription "GZIP compressed tar archive" .tgz
>
> #
> # ReadmeName is the name of the README file the server will look for
by
> # default, and append to directory listings.
> #
> # HeaderName is the name of a file which should be prepended to
> # directory indexes.
> ReadmeName README.html
> HeaderName HEADER.html
>
> #
> # IndexIgnore is a set of filenames which directory indexing should
> ignore
> # and not include in the listing.  Shell-style wildcarding is
permitted.
> #
> IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
>
> #
> # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
> uncompress
> # information on the fly. Note: Not all browsers support this.
> # Despite the name similarity, the following Add* directives have
> nothing
> # to do with the FancyIndexing customization directives above.
> #
> AddEncoding x-compress Z
> AddEncoding x-gzip gz tgz
>
> #
> # DefaultLanguage and AddLanguage allows you to specify the language
of
> # a document. You can then use content negotiation to give a browser a
> # file in a language the user can understand.
> #
> # Specify a default language. This means that all data
> # going out without a specific language tag (see below) will
> # be marked with this one. You probably do NOT want to set
> # this unless you are sure it is correct for all cases.
> #
> # * It is generally better to not mark a page as
> # * being a certain language than marking it with the wrong
> # * language!
> #
> # DefaultLanguage nl
> #
> # Note 1: The suffix does not have to be the same as the language
> # keyword --- those with documents in Polish (whose net-standard
> # language code is pl) may wish to use "AddLanguage pl .po" to
> # avoid the ambiguity with the common suffix for perl scripts.
> #
> # Note 2: The example entries below illustrate that in some cases
> # the two character 'Language' abbreviation is not identical to
> # the two character 'Country' code for its country,
> # E.g. 'Danmark/dk' versus 'Danish/da'.
> #
> # Note 3: In the case of 'ltz' we violate the RFC by using a three
char
> # specifier. There is 'work in progress' to fix this and get
> # the reference data for rfc1766 cleaned up.
> #
> # Danish (da) - Dutch (nl) - English (en) - Estonian (et)
> # French (fr) - German (de) - Greek-Modern (el)
> # Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
> # Portugese (pt) - Luxembourgeois* (ltz)
> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
> # Russian (ru) - Croatian (hr)
> #
> AddLanguage da .dk
> AddLanguage nl .nl
> AddLanguage en .en
> AddLanguage et .et
> AddLanguage fr .fr
> AddLanguage de .de
> AddLanguage he .he
> AddLanguage el .el
> AddLanguage it .it
> AddLanguage ja .ja
> AddLanguage pl .po
> AddLanguage ko .ko
> AddLanguage pt .pt
> AddLanguage nn .nn
> AddLanguage no .no
> AddLanguage pt-br .pt-br
> AddLanguage ltz .ltz
> AddLanguage ca .ca
> AddLanguage es .es
> AddLanguage sv .se
> AddLanguage cz .cz
> AddLanguage ru .ru
> AddLanguage tw .tw
> AddLanguage zh-tw .tw
> AddLanguage hr .hr
>
> #
> # LanguagePriority allows you to give precedence to some languages
> # in case of a tie during content negotiation.
> #
> # Just list the languages in decreasing order of preference. We have
> # more or less alphabetized them here. You probably want to change
this.
> #
> LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca
es
> sv tw
>
> #
> # ForceLanguagePriority allows you to serve a result page rather than
> # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE
> (Fallback)
> # [in case no accepted languages matched the available variants]
> #
> ForceLanguagePriority Prefer Fallback
>
> #
> # Specify a default charset for all pages sent out. This is
> # always a good idea and opens the door for future
internationalisation
> # of your web site, should you ever want it. Specifying it as
> # a default does little harm; as the standard dictates that a page
> # is in iso-8859-1 (latin1) unless specified otherwise i.e. you
> # are merely stating the obvious. There are also some security
> # reasons in browsers, related to javascript and URL parsing
> # which encourage you to always set a default char set.
> #
> AddDefaultCharset ISO-8859-1
>
> #
> # Commonly used filename extensions to character sets. You probably
> # want to avoid clashes with the language extensions, unless you
> # are good at carefully testing your setup after each change.
> # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
> # the official list of charset names and their respective RFCs
> #
> AddCharset ISO-8859-1  .iso8859-1  .latin1
> AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
> AddCharset ISO-8859-3  .iso8859-3  .latin3
> AddCharset ISO-8859-4  .iso8859-4  .latin4
> AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
> AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
> AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
> AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
> AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
> AddCharset ISO-2022-JP .iso2022-jp .jis
> AddCharset ISO-2022-KR .iso2022-kr .kis
> AddCharset ISO-2022-CN .iso2022-cn .cis
> AddCharset Big5        .Big5       .big5
> # For russian, more than one charset is used (depends on client,
> mostly):
> AddCharset WINDOWS-1251 .cp-1251   .win-1251
> AddCharset CP866       .cp866
> AddCharset KOI8-r      .koi8-r .koi8-ru
> AddCharset KOI8-ru     .koi8-uk .ua
> AddCharset ISO-10646-UCS-2 .ucs2
> AddCharset ISO-10646-UCS-4 .ucs4
> AddCharset UTF-8       .utf8
>
> # The set below does not map to a specific (iso) standard
> # but works on a fairly wide range of browsers. Note that
> # capitalization actually matters (it should not, but it
> # does for some browsers).
> #
> # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
> # for a list of sorts. But browsers support few.
> #
> AddCharset GB2312      .gb2312 .gb
> AddCharset utf-7       .utf7
> AddCharset utf-8       .utf8
> AddCharset big5        .big5 .b5
> AddCharset EUC-TW      .euc-tw
> AddCharset EUC-JP      .euc-jp
> AddCharset EUC-KR      .euc-kr
> AddCharset shift_jis   .sjis
>
> #
> # AddType allows you to add to or override the MIME configuration
> # file mime.types for specific file types.
> #
> AddType application/x-tar .tgz
>
> #
> # AddHandler allows you to map certain file extensions to "handlers":
> # actions unrelated to filetype. These can be either built into the
> server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add "ExecCGI" to the "Options" directive.)
> #
> #AddHandler cgi-script .cgi
>
> #
> # For files that include their own HTTP headers:
> #
> #AddHandler send-as-is asis
>
> #
> # For server-parsed imagemap files:
> #
> #AddHandler imap-file map
>
> #
> # For type maps (negotiated resources):
> # (This is enabled by default to allow the Apache "It Worked" page
> #  to be distributed in multiple languages.)
> #
> AddHandler type-map var
>
> # Filters allow you to process content before it is sent to the
client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add "Includes" to the "Options" directive.)
> #
> #AddType text/html .shtml
> #AddOutputFilter INCLUDES .shtml
>
> #
> # Action lets you define media types that will execute a script
whenever
> # a matching file is called. This eliminates the need for repeated URL
> # pathnames for oft-used CGI file processors.
> # Format: Action media/type /cgi-script/location
> # Format: Action handler-name /cgi-script/location
> #
>
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> #ErrorDocument 500 "The server made a boo boo."
> #ErrorDocument 404 /missing.html
> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> #ErrorDocument 402 http://www.example.com/subscription_info.html
> #
>
> #
> # Putting this all together, we can Internationalize error responses.
> #
> # We use Alias to redirect any /error/HTTP_<error>.html.var response
to
> # our collection of by-error message multi-language collections.  We
use
>
> # includes to substitute the appropriate text.
> #
> # You can modify the messages' appearance without changing any of the
> # default HTTP_<error>.html.var files by adding the line;
> #
> #   Alias /error/include/ "/your/include/path/"
> #
> # which allows you to create your own set of files by starting with
the
> # /usr/local/apache2/error/include/ files and
> # copying them to /your/include/path/, even on a per-VirtualHost
basis.
> #
>
> <IfModule mod_negotiation.c>
> <IfModule mod_include.c>
>     Alias /error/ "/usr/local/apache2/error/"
>
>     <Directory "/usr/local/apache2/error">
>         AllowOverride None
>         Options IncludesNoExec
>         AddOutputFilter Includes html
>         AddHandler type-map var
>         Order allow,deny
>         Allow from all
>         LanguagePriority en es de fr
>         ForceLanguagePriority Prefer Fallback
>     </Directory>
>
>     ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
>     ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
>     ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
>     ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
>     ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
>     ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
>     ErrorDocument 410 /error/HTTP_GONE.html.var
>     ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
>     ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
>     ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
>     ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
>     ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
>     ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
>     ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
>     ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
>     ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
>     ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
>
> </IfModule>
> </IfModule>
>
> #
> # The following directives modify normal HTTP response behavior to
> # handle known problems with browser implementations.
> #
> BrowserMatch "Mozilla/2" nokeepalive
> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-1.0
> BrowserMatch "RealPlayer 4\.0" force-response-1.0
> BrowserMatch "Java/1\.0" force-response-1.0
> BrowserMatch "JDK/1\.0" force-response-1.0
>
> #
> # The following directive disables redirects on non-GET requests for
> # a directory that does not include the trailing slash.  This fixes a
> # problem with Microsoft WebFolders which does not appropriately
handle
> # redirects for folders with DAV methods.
> #
> BrowserMatch "Microsoft Data Access Internet Publishing Provider"
> redirect-carefully
> BrowserMatch "^WebDrive" redirect-carefully
>
> #
> # Allow server status reports, with the URL of
> http://servername/server-status
> # Change the ".your-domain.com" to match your domain to enable.
> #
> #<Location /server-status>
> #    SetHandler server-status
> #    Order deny,allow
> #    Deny from all
> #    Allow from .your-domain.com
> #</Location>
>
> #
> # Allow remote server configuration reports, with the URL of
> #  http://servername/server-info (requires that mod_info.c be loaded).
> # Change the ".your-domain.com" to match your domain to enable.
> #
> #<Location /server-info>
> #    SetHandler server-info
> #    Order deny,allow
> #    Deny from all
> #    Allow from .your-domain.com
> #</Location>
>
> #
> # Proxy Server directives. Uncomment the following lines to
> # enable the proxy server:
> #
> #<IfModule mod_proxy.c>
> #ProxyRequests On
> #
> #<Proxy *>
> #    Order deny,allow
> #    Deny from all
> #    Allow from .your-domain.com
> #</Proxy>
>
> #
> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
> # ("Full" adds the server version; "Block" removes all outgoing Via:
> headers)
> # Set to one of: Off | On | Full | Block
> #
> #ProxyVia On
>
> #
> # To enable the cache as well, edit and uncomment the following lines:
> # (no cacheing without CacheRoot)
> #
> #CacheRoot "/usr/local/apache2/proxy"
> #CacheSize 5
> #CacheGcInterval 4
> #CacheMaxExpire 24
> #CacheLastModifiedFactor 0.1
> #CacheDefaultExpire 1
> #NoCache a-domain.com another-domain.edu joes.garage-sale.com
>
> #</IfModule>
> # End of proxy directives.
>
> #
> # Bring in additional module-specific configurations
> #
> <IfModule mod_ssl.c>
>     Include conf/ssl.conf
> </IfModule>
>
>
> ### Section 3: Virtual Hosts
> #
> # VirtualHost: If you want to maintain multiple domains/hostnames on
> your
> # machine you can setup VirtualHost containers for them. Most
> configurations
> # use only name-based virtual hosts so the server doesn't need to
worry
> about
> # IP addresses. This is indicated by the asterisks in the directives
> below.
> #
> # Please see the documentation at
> # <URL:http://httpd.apache.org/docs-2.0/vhosts/>
> # for further details before you try to setup virtual hosts.
> #
> # You may use the command line option '-S' to verify your virtual host
> # configuration.
>
> #
> # Use name-based virtual hosting.
> #
> #NameVirtualHost *
>
> #
> # VirtualHost example:
> # Almost any Apache directive may go into a VirtualHost container.
> # The first VirtualHost section is used for requests without a known
> # server name.
> #
> #<VirtualHost *>
> #    ServerAdmin webmaster@dummy-host.example.com
> #    DocumentRoot /www/docs/dummy-host.example.com
> #    ServerName dummy-host.example.com
> #    ErrorLog logs/dummy-host.example.com-error_log
> #    CustomLog logs/dummy-host.example.com-access_log common
> #</VirtualHost>
>
> <VirtualHost 10.0.0.251>
>     ServerAdmin cmarakas@rsimail.com
>     DocumentRoot /home/testsite/rsiwebs/web1.2
>     ServerName RSITestWeb
>     ErrorLog logs/testsite_log
>     CustomLog logs/testsite_log common
> </VirtualHost>
> # This should be changed to whatever you set DocumentRoot to.
> <Directory "/home/testsite/rsiwebs/web1.2">
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> Multiviews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important.  Please see
> # http://httpd.apache.org/docs-2.0/mod/core.html#options
> # for more information.
> #
>     Options Indexes FollowSymLinks
>
> #
> # AllowOverride controls what directives may be placed in .htaccess
> files.
> # It can be "All", "None", or any combination of the keywords:
> #   Options FileInfo AuthConfig Limit
> #
>     AllowOverride All
>     IndexOptions FancyIndexing
> #
> # Controls who can get stuff from this server.
> #
>     Order allow,deny
>     Allow from all
> </Directory>
> #cmarakas-testing
> <VirtualHost 10.0.0.252>
>     ServerAdmin cmarakas@rsimail.com
>     DocumentRoot /home/virtual/rsiwebs/web1.2
>     ServerName RSITestWeb
>     ErrorLog logs/testsite_log
>     CustomLog logs/testsite_log common
> </VirtualHost>
> # This should be changed to whatever you set DocumentRoot to.
> <Directory "/home/virtual/rsiwebs/web1.2">
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> Multiviews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important.  Please see
> # http://httpd.apache.org/docs-2.0/mod/core.html#options
> # for more information.
> #
>     Options Indexes FollowSymLinks
>
> #
> # AllowOverride controls what directives may be placed in .htaccess
> files.
> # It can be "All", "None", or any combination of the keywords:
> #   Options FileInfo AuthConfig Limit
> #
>     AllowOverride All
>     IndexOptions FancyIndexing
> #
> # Controls who can get stuff from this server.
> #
>     Order allow,deny
>     Allow from all
> </Directory>
>
>
> ### RSI - B.Orledge
> Include conf/mod_jk.conf
>
>
>
>


--
To unsubscribe, e-mail:
<mailto:tomcat-user-unsubscribe@jakarta.apache.org>
For additional commands, e-mail:
<mailto:tomcat-user-help@jakarta.apache.org>

--
To unsubscribe, e-mail:
<mailto:tomcat-user-unsubscribe@jakarta.apache.org>
For additional commands, e-mail:
<mailto:tomcat-user-help@jakarta.apache.org>


--
To unsubscribe, e-mail:   <mailto:tomcat-user-unsubscribe@jakarta.apache.org>
For additional commands, e-mail: <mailto:tomcat-user-help@jakarta.apache.org>


Mime
View raw message