tomcat-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Debbie Coyle <dco...@mediaone.net>
Subject mod_jk
Date Tue, 28 Aug 2001 23:56:24 GMT
I'm trying to integrate Tomcat to Apache.  I get the following error
message when I start Apache:
"One of the library files needed to run this application cannot be
found"

Here is my httpd.conf file.
#
# Based upon the NCSA server configuration files originally by Rob
McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are
unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# C:/Program Files/Apache Group/Apache/conf/srm.conf and then C:/Program
Files/Apache Group/Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process
as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default'
server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to

#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32),
the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located

# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,

# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone.  Inetd mode is only
supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
ServerRoot "C:/Program Files/Apache Group/Apache"

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile logs/httpd.pid

#
# ScoreBoardFile: File used to store internal server process
information.
# Not all architectures require this.  But if yours does (you'll know
because
# this file will be  created when you run Apache) then you *must* ensure
that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile logs/apache_runtime_status

#
# In the standard configuration, the server will process httpd.conf
(this
# file, specified by the -f command line option), srm.conf, and
access.conf
# in that order.  The latter two files are now distributed empty, as it
is
# recommended that all directives be kept in a single file for
simplicity.
# The commented-out values below are the built-in defaults.  You can
have the
# server ignore these files altogether by using "/dev/null" (for Unix)
or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from
the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Apache on Win32 always creates one child process to handle requests.
If it
# dies, another child process is created automatically.  Within the
child
# process multiple threads handle incoming requests.  The next two
# directives control the behaviour of the threads and processes.
#

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.  The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources.  On most systems,
this
# isn't really needed, but a few (such as Solaris) do have notable leaks

# in the libraries.  For Win32, set this value to zero (unlimited)
# unless advised otherwise.
#
# NOTE: This value does not include keepalive requests after the initial

#       request per connection. For example, if a child process handles
#       an initial request and 10 subsequent "keptalive" requests, it
#       would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
#
ThreadsPerChild 50

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80

#
# BindAddress: You can support virtual hosts with this option. This
directive
# is used to tell the server which IP address to listen to. It can
either
# contain "*", an IP address, or a fully qualified Internet domain name.

# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Apache Modules compiled into the standard Windows build
#
# The following modules are bound into the standard Apache binary
distribution
# for Windows.  To change the standard behavior, uncomment the following
lines
# and modify the list of those specific modules to be enabled in the
server.
#
# WARNING: This is an advanced option that may render your server
inoperable!
# Do not use these directives without expert guidance.
#
#ClearModuleList
#AddModule mod_so.c mod_mime.c mod_access.c mod_auth.c mod_negotiation.c

#AddModule mod_include.c mod_autoindex.c mod_dir.c mod_cgi.c
mod_userdir.c
#AddModule mod_alias.c mod_env.c mod_log_config.c mod_asis.c mod_imap.c
#AddModule mod_actions.c mod_setenvif.c mod_isapi.c

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are
used.
# Please read the file README.DSO in the Apache 1.3 distribution for
more
# details about the DSO mechanism and run `apache -l' for the list of
already
# built-in (statically linked and thus always available) modules in your
Apache
# binary.
#
# Note: The order in which modules are loaded is important.  Don't
change
# the order below without expert advice.
#
#LoadModule anon_auth_module modules/mod_auth_anon.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
#LoadModule digest_auth_module modules/mod_auth_digest.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule digest_module modules/mod_digest.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule info_module modules/mod_info.so
#LoadModule status_module modules/mod_status.so
#LoadModule usertrack_module modules/mod_usertrack.so

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information
(ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# Port: The port to which the standalone server listens.  Certain
firewall
# products must be configured before Apache can listen to a specific
port.
# Other running httpd servers will also interfere with this port.
Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
#
Port 80

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin dcoyle@mediaone.net

#
# ServerName allows you to set a host name which is sent back to clients
for
# your server if it's different than the one the program would get
(i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name
you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address
here.
# You will have to access it by its address (e.g., http://123.45.67.89/)

# anyway, and this will make redirections work in a sensible way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often named
localhost. Your
# machine always knows itself by this address. If you use Apache
strictly for
# local testing and development, you may use 127.0.0.1 as the server
name.
#
ServerName ct-coyle.hphood


#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/Program Files/Apache Group/Apache/htdocs"

#
# Each directory to which Apache has access, can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/Program Files/Apache Group/Apache/htdocs">

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
    Options Indexes FollowSymLinks MultiViews

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options",
"FileInfo",
# "AuthConfig", and "Limit"
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto a user's
home
# directory if a ~user request is received.
#
# Under Win32, we do not currently try to determine the home directory
of
# a Windows login, so a format such as that below needs to be used.  See

# the UserDir documentation for details.
#
<IfModule mod_userdir.c>
    UserDir "C:/Program Files/Apache Group/Apache/users/"
</IfModule>

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory "C:/Program Files/Apache Group/Apache/users">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
#
# Control access to CD rom directories.
#
Alias /java/ "E:/"


#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML

# directory index.  Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
    DirectoryIndex index.html
</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with
each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line
disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName:  (new for 1.3)  With this setting turned on,
whenever
# Apache needs to construct a self-referencing URL (a URL that refers
back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
    TypesConfig conf/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from
the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include
mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule>
container.
# This means that the MIMEMagicFile directive will only be processed if
the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if
people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent

#
# If you prefer a single logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory
listings,
# mod_status and mod_info output etc., but not CGI generated documents).

# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the
symbols
# pound (#) and exclamation (!) followed by the path of the program that

# can execute this specific script.  For a perl script, with perl.exe in

# the C:\Program Files\Perl directory, the shebang line should be:

   #!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the

# first line of the file.  Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the
files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or
can
# use the Registry to match files by extention.  The command to execute
# a file of this type is retrieved from the registry by the same method
as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View
menu,
# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the
Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts
to
# perform the 'Open' Action, and failing that it will try the shebang
line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the
means
# to run a program you didn't intend the website owner to invoke, and
the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable-
the
# equivilant Unix behavior), uncomment the following directive:
#
ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or
the
# .htaccess file, with either the 'registry' (Windows behavior) or
'script'
# (Unix behavior) option, and will override this server default option.
#

#
# Aliases: Add here as many aliases as you need (with no limit). The
format is
# Alias fakename realname
#
<IfModule mod_alias.c>

    #
    # Note that if you include a trailing / on fakename then the server
will
    # require it to be present in the URL.  So "/icons" isn't aliased in
this
    # example, only "/icons/".  If the fakename is slash-terminated,
then the
    # realname must also be slash terminated, and if the fakename omits
the
    # trailing slash, the realname must also omit it.
    #
    Alias /icons/ "C:/Program Files/Apache Group/Apache/icons/"

    <Directory "C:/Program Files/Apache Group/Apache/icons">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    #
    # ScriptAlias: This controls which directories contain server
scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications
and
    # run by the server when requested rather than as documents sent to
the client.
    # The same rules about trailing "/" apply to ScriptAlias directives
as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache
Group/Apache/cgi-bin/"

    #
    # "C:/Program Files/Apache Group/Apache/cgi-bin" should be changed
to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "C:/Program Files/Apache Group/Apache/cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>

</IfModule>
# End of aliases.

#
# Redirect allows you to tell clients about documents which used to
exist in
# your server's namespace, but do not anymore. This allows you to tell
the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory
listings.
#
<IfModule mod_autoindex.c>

    #
    # FancyIndexing is whether you want fancy directory indexing or
standard
    #
    # Note, add the option TrackModified to the IndexOptions default
list only
    # if all indexed directories reside on NTFS volumes.  The
TrackModified flag
    # will report the Last-Modified date to assist caches and proxies to
properly
    # track directory changes, but it does _not_ work on FAT volumes.
    #
    IndexOptions FancyIndexing

    #
    # AddIcon* directives tell the server which icon to show for
different
    # files or filename extensions.  These are only displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*

    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core

    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^

    #
    # DefaultIcon is which icon to show for files which do not have an
icon
    # explicitly set.
    #
    DefaultIcon /icons/unknown.gif

    #
    # AddDescription allows you to place a short description after a
file in
    # server-generated indexes.  These are only displayed for
FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz

    #
    # ReadmeName is the name of the README file the server will look for
by
    # default, and append to directory listings.
    #
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    #
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found.  If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    #
    ReadmeName README
    HeaderName HEADER

    #
    # IndexIgnore is a set of filenames which directory indexing should
ignore
    # and not include in the listing.  Shell-style wildcarding is
permitted.
    #
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

    #
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have
nothing
    # to do with the FancyIndexing customization directives above.
    #
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    #
    # AddLanguage allows you to specify the language of a document. You
can
    # then use content negotiation to give a browser a file in a
language
    # it can understand.
    #
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    #
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbreviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    #
    # Note 3: In the case of 'ltz' we violate the RFC by using a three
char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    #
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    #
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .se
    AddLanguage cz .cz
    AddLanguage ru .ru
    AddLanguage tw .tw
    AddLanguage zh-tw .tw
    AddCharset Big5         .Big5    .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866        .cp866
    AddCharset ISO-8859-5   .iso-ru
    AddCharset KOI8-R       .koi8-r
    AddCharset UCS-2        .ucs2
    AddCharset UCS-4        .ucs4
    AddCharset UTF-8        .utf8

    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of preference. We have

    # more or less alphabetized them here. You probably want to change
this.
    #
    <IfModule mod_negotiation.c>
        LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru
ltz ca es sv tw
    </IfModule>

    #
    # AddType allows you to tweak mime.types without actually editing
it, or to
    # make certain files to be certain types.
    #
    # For example, the PHP 3.x module (not part of the Apache
distribution - see
    # http://www.php.net) will typically use:
    #
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    #
    # And for PHP 4.x, use:
    #
    #AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps

    AddType application/x-tar .tgz

    #
    # AddHandler allows you to map certain file extensions to
"handlers",
    # actions unrelated to filetype. These can be either built into the
server
    # or added with the Action command (see below)
    #
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    #
    # To use CGI scripts:
    #
    #AddHandler cgi-script .cgi

    #
    # To use server-parsed HTML files
    #
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml

    #
    # Uncomment the following line to enable Apache's send-asis HTTP
file
    # feature
    #
    #AddHandler send-as-is asis

    #
    # If you wish to use server-parsed imagemap files, use
    #
    #AddHandler imap-file map

    #
    # To enable type maps, you might want to use
    #
    #AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script whenever

# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing the

# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo.
#  n.b.  the single leading (") marks it as text, it does not get output

#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using
server-side-includes.
#
#    3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
#  N.B.: Many of the environment variables associated with the original
#  request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

    #
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and
browsers that
    # spoof it. There are known problems with these browser
implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect)
responses.
    #
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-1.0

    #
    # The following directive disables HTTP/1.1 responses to browsers
which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    #
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0

</IfModule>
# End of browser customization directives

#
# Allow server status reports, with the URL of
http://servername/server-status
# Change the "hphood" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from hphood
#</Location>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the "hphood" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from hphood
#</Location>

#
# There have been reports of people trying to abuse an old bug from
pre-1.1
# days.  This bug involved a CGI script distributed as a part of Apache.

# By uncommenting these lines you can redirect these attacks to a
logging
# script on phf.apache.org.  Or, you can record them yourself, using the
script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#    ProxyRequests On

#    <Directory proxy:*>
#        Order deny,allow
#        Deny from all
#        Allow from hphood
#    </Directory>

    #
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via:
headers)
    # Set to one of: Off | On | Full | Block
    #
#    ProxyVia On

    #
    # To enable the cache as well, edit and uncomment the following
lines:
    # (no cacheing without CacheRoot)
    #
#    CacheRoot "C:/Program Files/Apache Group/Apache/proxy"
#    CacheSize 5
#    CacheGcInterval 4
#    CacheMaxExpire 24
#    CacheLastModifiedFactor 0.1
#    CacheDefaultExpire 1
#    NoCache a_domain.com another_domain.edu joes.garage_sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on
your
# machine you can setup VirtualHost containers for them. Most
configurations
# use only name-based virtual hosts so the server doesn't need to worry
about
# IP addresses. This is indicated by the asterisks in the directives
below.
#
# Please see the documentation at
<URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

Include "c:/Program Files/Apache
Group/Tomcat/jakarta-tomcat-3.2.2/conf/mod_jk.conf-auto"




Mime
View raw message