Akira AJISAKA (JIRA) |
[jira] [Updated] (TEZ-872) Both tez.runtime.intermediate-output.should-compress and tez.runtime.intermediate-input.is-compressed seem unnecessary |
Fri, 21 Feb, 20:05 |
Akira AJISAKA (JIRA) |
[jira] [Updated] (TEZ-872) Both tez.runtime.intermediate-output.should-compress and tez.runtime.intermediate-input.is-compressed seem unnecessary |
Fri, 21 Feb, 20:07 |
Akira AJISAKA (JIRA) |
[jira] [Commented] (TEZ-872) Both tez.runtime.intermediate-output.should-compress and tez.runtime.intermediate-input.is-compressed seem unnecessary |
Sat, 22 Feb, 01:18 |
Akira AJISAKA (JIRA) |
[jira] [Comment Edited] (TEZ-872) Both tez.runtime.intermediate-output.should-compress and tez.runtime.intermediate-input.is-compressed seem unnecessary |
Sat, 22 Feb, 01:18 |
Ashish Singh (JIRA) |
[jira] [Created] (TEZ-894) Tez should have a way to know build manifest |
Wed, 26 Feb, 21:58 |
Ashish Singh (JIRA) |
[jira] [Updated] (TEZ-894) Tez should have a way to know build manifest |
Wed, 26 Feb, 22:04 |
Ashish Singh (JIRA) |
[jira] [Updated] (TEZ-894) Tez should have a way to know build manifest |
Wed, 26 Feb, 22:12 |
Ashish Singh (JIRA) |
[jira] [Comment Edited] (TEZ-894) Tez should have a way to know build manifest |
Wed, 26 Feb, 22:14 |
Ashish Singh (JIRA) |
[jira] [Updated] (TEZ-894) Tez should have a way to know build manifest |
Thu, 27 Feb, 00:05 |
Ashish Singh (JIRA) |
[jira] [Comment Edited] (TEZ-894) Tez should have a way to know build manifest |
Thu, 27 Feb, 00:09 |
Ashish Singh (JIRA) |
[jira] [Comment Edited] (TEZ-894) Tez should have a way to know build manifest |
Thu, 27 Feb, 00:09 |
Ashish Singh (JIRA) |
[jira] [Updated] (TEZ-894) Tez should have a way to know build manifest |
Thu, 27 Feb, 02:19 |
Ashish Singh (JIRA) |
[jira] [Updated] (TEZ-894) Tez should have a way to know build manifest |
Thu, 27 Feb, 02:19 |
Ashish Singh (JIRA) |
[jira] [Updated] (TEZ-894) Tez should have a way to know build manifest |
Thu, 27 Feb, 02:19 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-784) Add TestDriver to allow cmd line submission of tests to a cluster |
Sat, 01 Feb, 00:20 |
Bikas Saha (JIRA) |
[jira] [Assigned] (TEZ-784) Add TestDriver to allow cmd line submission of tests to a cluster |
Sat, 01 Feb, 00:20 |
Bikas Saha (JIRA) |
[jira] [Resolved] (TEZ-784) Add TestDriver to allow cmd line submission of tests to a cluster |
Sat, 01 Feb, 00:26 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-766) Support an api to pre-warm containers for a session |
Sun, 02 Feb, 19:14 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-790) Addendum patch for TEZ-784: failing config constants renaming is incomplete. |
Mon, 03 Feb, 22:17 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-745) Rename TEZ_AM_ABORT_ALL_OUTPUTS_ON_DAG_FAILURE in TezConfiguration to TEZ_AM_COMMIT_ALL_OUTPUTS_ON_DAG_SUCCESS |
Mon, 03 Feb, 22:31 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-745) Rename TEZ_AM_ABORT_ALL_OUTPUTS_ON_DAG_FAILURE in TezConfiguration to TEZ_AM_COMMIT_ALL_OUTPUTS_ON_DAG_SUCCESS |
Mon, 03 Feb, 22:39 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-782) Scale I/O mem requirements if misconfigured |
Mon, 03 Feb, 22:57 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-782) Scale I/O mem requirements if misconfigured |
Mon, 03 Feb, 22:59 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Mon, 03 Feb, 23:15 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Mon, 03 Feb, 23:15 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-781) Add unit test for fault tolerance (input failure causes re-run of previous task which also has attempt failures) |
Mon, 03 Feb, 23:21 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-781) Add unit test for fault tolerance (input failure causes re-run of previous task which also has attempt failures) |
Tue, 04 Feb, 00:01 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Tue, 04 Feb, 00:07 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-781) Add unit test for fault tolerance (input failure causes re-run of previous task which also has attempt failures) |
Tue, 04 Feb, 01:53 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Tue, 04 Feb, 02:07 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Tue, 04 Feb, 02:36 |
Bikas Saha (JIRA) |
[jira] [Assigned] (TEZ-775) Fix usage of env vars |
Tue, 04 Feb, 02:52 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-775) Fix usage of env vars |
Tue, 04 Feb, 02:54 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Tue, 04 Feb, 03:02 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-775) Fix usage of env vars |
Tue, 04 Feb, 03:18 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Tue, 04 Feb, 03:22 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Tue, 04 Feb, 03:26 |
Bikas Saha (JIRA) |
[jira] [Assigned] (TEZ-774) Fix name resolution for local addresses in test |
Tue, 04 Feb, 03:40 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-774) Fix name resolution for local addresses in test |
Tue, 04 Feb, 03:42 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-774) Fix name resolution for local addresses in test |
Tue, 04 Feb, 03:56 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-792) Default staging path should have user name |
Wed, 05 Feb, 06:30 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-793) Staging directories accumulate and pollute the home directory |
Wed, 05 Feb, 06:34 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Wed, 05 Feb, 06:56 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Wed, 05 Feb, 06:58 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Wed, 05 Feb, 17:12 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Wed, 05 Feb, 19:56 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Wed, 05 Feb, 20:00 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Wed, 05 Feb, 21:04 |
Bikas Saha (JIRA) |
[jira] [Resolved] (TEZ-783) Add standard DAGs using failing processors/inputs for test purpose |
Wed, 05 Feb, 21:16 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-745) Rename TEZ_AM_ABORT_ALL_OUTPUTS_ON_DAG_FAILURE in TezConfiguration to TEZ_AM_COMMIT_ALL_OUTPUTS_ON_DAG_SUCCESS |
Wed, 05 Feb, 21:24 |
Bikas Saha (JIRA) |
[jira] [Resolved] (TEZ-745) Rename TEZ_AM_ABORT_ALL_OUTPUTS_ON_DAG_FAILURE in TezConfiguration to TEZ_AM_COMMIT_ALL_OUTPUTS_ON_DAG_SUCCESS |
Wed, 05 Feb, 21:34 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-799) Generate data to be used for recovery |
Wed, 05 Feb, 22:22 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-781) Add unit test for fault tolerance (input failure causes re-run of previous task which also has attempt failures) |
Thu, 06 Feb, 00:36 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-781) Add unit test for fault tolerance (input failure causes re-run of previous task which also has attempt failures) |
Thu, 06 Feb, 01:44 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-782) Scale I/O mem requirements if misconfigured |
Thu, 06 Feb, 03:04 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-781) Add unit test for fault tolerance (input failure causes re-run of previous task under allowed maximum failed attempt) |
Thu, 06 Feb, 03:26 |
Bikas Saha (JIRA) |
[jira] [Resolved] (TEZ-781) Add unit test for fault tolerance (input failure causes re-run of previous task under allowed maximum failed attempt) |
Thu, 06 Feb, 03:36 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-782) Scale I/O mem requirements if misconfigured |
Thu, 06 Feb, 18:36 |
Bikas Saha (JIRA) |
[jira] [Assigned] (TEZ-800) One-one edge with parallelism -1 fails if source vertex parallelism is not -1 as well |
Thu, 06 Feb, 18:44 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-800) One-one edge with parallelism -1 fails if source vertex parallelism is not -1 as well |
Thu, 06 Feb, 18:48 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-801) Failure handling broken for Auto-Reduce |
Thu, 06 Feb, 19:50 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-802) Determination of Task Placement for 1-1 Edges |
Thu, 06 Feb, 19:54 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-803) Fault Tolerance In Tez |
Thu, 06 Feb, 19:56 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-748) Test Tez Fault Tolerance |
Thu, 06 Feb, 19:58 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-781) Add unit test for fault tolerance (input failure causes re-run of previous task under allowed maximum failed attempt) |
Thu, 06 Feb, 19:58 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-784) Add TestDriver to allow cmd line submission of tests to a cluster |
Thu, 06 Feb, 20:00 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-780) Add unit test for fault tolerance (input failure causes re-run of previous task but new attempt exceeds allowed number of attempts) |
Thu, 06 Feb, 20:00 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-801) Failure handling broken for Auto-Reduce |
Thu, 06 Feb, 20:00 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-800) One-one edge with parallelism -1 fails if source vertex parallelism is not -1 as well |
Thu, 06 Feb, 21:55 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-804) Handle node loss |
Thu, 06 Feb, 22:15 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-802) Determination of Task Placement for 1-1 Edges |
Thu, 06 Feb, 22:57 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-805) Add functional test for Auto-Reduce |
Thu, 06 Feb, 22:59 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-800) One-one edge with parallelism -1 fails if source vertex parallelism is not -1 as well |
Thu, 06 Feb, 23:13 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-806) Ensure appropriate number of data movement events are generated by a task |
Thu, 06 Feb, 23:25 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-806) Ensure appropriate number of data movement events are generated by a task |
Thu, 06 Feb, 23:25 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-808) Handle task attempts that are not making progress |
Thu, 06 Feb, 23:27 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-782) Scale I/O mem requirements if misconfigured |
Fri, 07 Feb, 07:14 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-814) Improve heuristic for determining a task has failed outputs |
Fri, 07 Feb, 07:16 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-817) TEZ_LIB_URI are always uploaded as public Local Resource |
Fri, 07 Feb, 18:39 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Fri, 07 Feb, 18:59 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Fri, 07 Feb, 19:44 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-819) YARNRunner should not put -m/-r in output name when using mapred API |
Fri, 07 Feb, 21:14 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-819) YARNRunner should not put -m/-r in output name when using mapred API |
Fri, 07 Feb, 21:26 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-819) YARNRunner should not put -m/-r in output name when using mapred API |
Fri, 07 Feb, 21:26 |
Bikas Saha (JIRA) |
[jira] [Resolved] (TEZ-819) YARNRunner should not put -m/-r in output name when using mapred API |
Fri, 07 Feb, 21:26 |
Bikas Saha (JIRA) |
[jira] [Resolved] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Sat, 08 Feb, 01:55 |
Bikas Saha (JIRA) |
[jira] [Resolved] (TEZ-774) Fix name resolution for local addresses in test |
Sat, 08 Feb, 01:55 |
Bikas Saha (JIRA) |
[jira] [Assigned] (TEZ-773) Fix configuration of tez jars location in MiniTezCluster |
Sat, 08 Feb, 01:55 |
Bikas Saha (JIRA) |
[jira] [Resolved] (TEZ-775) Fix usage of env vars |
Sat, 08 Feb, 01:57 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-816) Add unit test for cascading input failure |
Sat, 08 Feb, 22:20 |
Bikas Saha (JIRA) |
[jira] [Assigned] (TEZ-804) Handle node loss |
Sat, 08 Feb, 22:38 |
Bikas Saha (JIRA) |
[jira] [Created] (TEZ-820) Tez needs to use consistent hosts and racks |
Sun, 09 Feb, 01:10 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-804) Handle node loss/bad nodes |
Sun, 09 Feb, 01:23 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-782) Scale I/O mem requirements if misconfigured |
Mon, 10 Feb, 20:16 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-804) Handle node loss/bad nodes |
Mon, 10 Feb, 22:17 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-804) Handle node loss/bad nodes |
Mon, 10 Feb, 22:33 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-804) Handle node loss/bad nodes |
Mon, 10 Feb, 22:33 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-804) Handle node loss/bad nodes |
Mon, 10 Feb, 22:57 |
Bikas Saha (JIRA) |
[jira] [Updated] (TEZ-804) Handle node loss/bad nodes |
Mon, 10 Feb, 22:57 |
Bikas Saha (JIRA) |
[jira] [Commented] (TEZ-804) Handle node loss/bad nodes |
Tue, 11 Feb, 01:07 |