syncope-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From ma...@apache.org
Subject [2/3] syncope git commit: Renamed files, client library and syntax error, SYNCOPE-700
Date Wed, 02 Dec 2015 13:04:00 GMT
http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/cli-schema.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/cli-schema.adoc b/src/main/asciidoc/cli/cli-schema.adoc
deleted file mode 100644
index 0e88f07..0000000
--- a/src/main/asciidoc/cli/cli-schema.adoc
+++ /dev/null
@@ -1,303 +0,0 @@
-//
-// Licensed to the Apache Software Foundation (ASF) under one
-// or more contributor license agreements.  See the NOTICE file
-// distributed with this work for additional information
-// regarding copyright ownership.  The ASF licenses this file
-// to you under the Apache License, Version 2.0 (the
-// "License"); you may not use this file except in compliance
-// with the License.  You may obtain a copy of the License at
-//
-//   http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing,
-// software distributed under the License is distributed on an
-// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-// KIND, either express or implied.  See the License for the
-// specific language governing permissions and limitations
-// under the License.
-//
-
-==== Schema command
-The schema command serves to retrieve the information about every schema categories.
-
-===== Help message
-[source,bash]
-----
-Usage: schema [options]
-  Options:
-    --help 
-    --details 
-    --list-all
-    --list-plain
-    --list-derived
-    --list-virtual
-    --read {SCHEMA-TYPE} {SCHEMA-KEY}
-        Schema type: PLAIN / DERIVED / VIRTUAL
-    --delete {SCHEMA-TYPE} {SCHEMA-KEY}
-        Schema type: PLAIN / DERIVED / VIRTUAL
-----
-
-===== Details option
-This option shows a table with some details about the schemas and their categories.
-
-[source]
---
-$ ./syncopeadm.sh schema --details
---
-
-[source]
---
-
-You are runnig: schema --details 
-
-##############################
-#                            #
-#      SCHEMAS DETAILS       #
-#                            #
-##############################
-#                  #         #
-#      DETAIL      #  VALUE  #
-#                  #         #
-##############################
-#                  #         #
-#   total number   #   57    #
-#   plain schema   #   44    #
-#  derived schema  #   10    #
-#  virtual schema  #    3    #
-#                  #         #
-##############################
-
---
-
-===== List all option
-Running the command with this option you will see the list of all (PLAIN, DERIVED, VIRTUAL) schemas configured.
-
-[source]
---
-$ ./syncopeadm.sh schema --list-all
---
-
-===== List plain option
-Running the command with this option you will see the list of the plain schemas available in Syncope.
-
-[source]
---
-$ ./syncopeadm.sh schema --list-plain
---
-
-[source]
---
-
-You are runnig: schema --list-plain 
-
-################################################################
-#                                                              #
-#                        PLAIN SCHEMAS                         #
-#                                                              #
-################################################################
-#                                  #             #             #
-#            SCHEMA KEY            #    TYPE     #  MANDATORY  #
-#                                  #             #             #
-################################################################
-#                                  #             #             #
-#    password.cipher.algorithm     #   String    #    true     #
-#  notificationjob.cronExpression  #   String    #    false    #
-#     notification.maxRetries      #    Long     #    true     #
-#           token.length           #    Long     #    true     #
-#         token.expireTime         #    Long     #    true     #
-#     selfRegistration.allowed     #   Boolean   #    true     #
-#      passwordReset.allowed       #   Boolean   #    true     #
-#  passwordReset.securityQuestion  #   Boolean   #    true     #
-#     authentication.statuses      #   String    #    true     #
-#        log.lastlogindate         #   Boolean   #    true     #
-#    tasks.interruptMaxRetries     #    Long     #    true     #
-#      return.password.value       #   Boolean   #    false    #
-#        admin.user.layout         #   String    #    false    #
-#         self.user.layout         #   String    #    false    #
-#        admin.group.layout        #   String    #    false    #
-#        self.group.layout         #   String    #    false    #
-#     admin.membership.layout      #   String    #    false    #
-#      self.membership.layout      #   String    #    false    #
-#             fullname             #   String    #    true     #
-#              userId              #   String    #    true     #
-#            loginDate             #    Date     #    false    #
-#            firstname             #   String    #    false    #
-#             surname              #   String    #    true     #
-#               type               #   String    #    false    #
-#              email               #   String    #    false    #
-#          activationDate          #    Date     #    false    #
-#         uselessReadonly          #   String    #    false    #
-#               cool               #   Boolean   #    false    #
-#              gender              #    Enum     #    false    #
-#              aLong               #    Long     #    false    #
-#           makeItDouble           #    Long     #    false    #
-#             obscure              #  Encrypted  #    false    #
-#              photo               #   Binary    #    false    #
-#               icon               #   String    #    false    #
-#               show               #   Boolean   #    false    #
-#           rderived_sx            #   String    #    false    #
-#           rderived_dx            #   String    #    false    #
-#              title               #   String    #    false    #
-#         subscriptionDate         #    Date     #    false    #
-#           mderived_sx            #   String    #    false    #
-#           mderived_dx            #   String    #    false    #
-#          postalAddress           #   String    #    false    #
-#              model               #   String    #    false    #
-#             location             #   String    #    false    #
-#                                  #             #             #
-################################################################
-
---
-
-===== List derived option
-Running the command with this option you will see the list of the derived schemas available in Syncope with 
-their expression.
-
-[source]
---
-$ ./syncopeadm.sh schema --list-derived
---
-
-[source]
---
-
-You are runnig: schema --list-derived 
-
-#######################################################################################
-#                                                                                     #
-#                                   DERIVED SCHEMAS                                   #
-#                                                                                     #
-#######################################################################################
-#                      #                                                              #
-#      SCHEMA KEY      #                          EXPRESSION                          #
-#                      #                                                              #
-#######################################################################################
-#                      #                                                              #
-#      csvuserid       #                  firstname + ',' + surname                   #
-#          cn          #                  surname + ', ' + firstname                  #
-#       noschema       #                  surname + ', ' + notfound                   #
-#         info         #  username + ' - ' + creationDate + '[' + failedLogins + ']'  #
-#     rderiveddata     #               rderived_sx + '-' + rderived_dx                #
-#   displayProperty    #                      icon + ': ' + show                      #
-#  rderToBePropagated  #               rderived_sx + '-' + rderived_dx                #
-#    rderivedschema    #               rderived_sx + '-' + rderived_dx                #
-#     mderiveddata     #               mderived_sx + '-' + mderived_dx                #
-#  mderToBePropagated  #               mderived_sx + '-' + mderived_dx                #
-#                      #                                                              #
-#######################################################################################
-
---
-
-===== List virtual option
-Running the command with this option you will see the list of the virtual schemas available in Syncope.
-
-[source]
---
-$ ./syncopeadm.sh schema --list-virtual
---
-
-[source]
---
-
-You are runnig: schema --list-virtual 
-
-##################################
-#                                #
-#        VIRTUAL SCHEMAS         #
-#                                #
-##################################
-#                   #            #
-#    SCHEMA KEY     #  READONLY  #
-#                   #            #
-##################################
-#                   #            #
-#  virtualReadOnly  #    true    #
-#   rvirtualdata    #   false    #
-#    virtualdata    #   false    #
-#                   #            #
-##################################
-
---
-
-===== Read option
-The option to read all the information of specified schema.
-
-[source]
---
-$ ./syncopeadm.sh schema --read {SCHEMA-TYPE} {SCHEMA-KEY}
-   Schema type: PLAIN / DERIVED / VIRTUAL
---
-
-Unlike the list option, the read one shows the schema passed as input and, in case of PLAIN category, the full 
-attributes of it.
-
-[source]
---
-
-You are runnig: schema --read PLAIN email 
-
- > SCHEMA ID: email
-    type: String
-    any type class: minimal user
-    conversion pattern: null
-    mandatory condition: false
-    mime type: null
-    validator class: org.apache.syncope.core.persistence.jpa.attrvalue.validation.EmailAddressValidator
-    chiper algorithm: 
-
---
-[source]
---
-
-You are runnig: schema --read DERIVED info 
-
-###############################################################################
-#                                                                             #
-#                               DERIVED SCHEMAS                               #
-#                                                                             #
-###############################################################################
-#              #                                                              #
-#  SCHEMA KEY  #                          EXPRESSION                          #
-#              #                                                              #
-###############################################################################
-#              #                                                              #
-#     info     #  username + ' - ' + creationDate + '[' + failedLogins + ']'  #
-#              #                                                              #
-###############################################################################
-
---
-[source]
---
-
-You are runnig: schema --read VIRTUAL virtualReadOnly 
-
-##################################
-#                                #
-#        VIRTUAL SCHEMAS         #
-#                                #
-##################################
-#                   #            #
-#    SCHEMA KEY     #  READONLY  #
-#                   #            #
-##################################
-#                   #            #
-#  virtualReadOnly  #    true    #
-#                   #            #
-##################################
-
---
-
-===== Delete option
-The option to delete a specified schema.
-
-[source]
---
-$ ./syncopeadm.sh schema --delete {SCHEMA-TYPE} {SCHEMA-KEY}
-        Schema type: PLAIN / DERIVED / VIRTUAL
---
-
-The delete option, as can be imagined, tries to remove a specified schema.
-[source]
---
- - Schema {SCHEMA-KEY} successfully deleted
---
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/cli-task.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/cli-task.adoc b/src/main/asciidoc/cli/cli-task.adoc
deleted file mode 100644
index b57a535..0000000
--- a/src/main/asciidoc/cli/cli-task.adoc
+++ /dev/null
@@ -1,315 +0,0 @@
-//
-// Licensed to the Apache Software Foundation (ASF) under one
-// or more contributor license agreements.  See the NOTICE file
-// distributed with this work for additional information
-// regarding copyright ownership.  The ASF licenses this file
-// to you under the Apache License, Version 2.0 (the
-// "License"); you may not use this file except in compliance
-// with the License.  You may obtain a copy of the License at
-//
-//   http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing,
-// software distributed under the License is distributed on an
-// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-// KIND, either express or implied.  See the License for the
-// specific language governing permissions and limitations
-// under the License.
-//
-
-==== Task command
-The connector command serves to retrieve the information around the connector configuration in Apache Syncope.
-
-===== Help message
-[source,bash]
-----
-Usage: task [options]
-  Options:
-    --help 
-    --details
-    --list
-       Syntax: --list {TASK-TYPE} 
-          Task type: NOTIFICATION / PROPAGATION / PUSH / SCHEDULED / SYNCHRONIZATION
-    --list-running-jobs 
-    --list-scheduled-jobs 
-    --read 
-       Syntax: --read {TASK-ID} {TASK-ID} [...]
-    --read-execution 
-       Syntax: --read-execution {TASK-EXEC-ID} {TASK-EXEC-ID} [...]
-    --delete 
-       Syntax: --delete {TASK-ID} {TASK-ID} [...]
-    --delete-execution 
-       Syntax: --delete-execution {TASK-EXEC-ID} {TASK-EXEC-ID} [...]
-    --execute 
-       Syntax: --execute {TASK-ID} {DRY-RUN}
-          Dry run: true / false
-----
-
-===== Details option
-This option shows a table with some details about tasks and jobs.
-
-[source]
---
-$ ./syncopeadm.sh task --details
---
-
-[source]
---
-
-You are runnig: task --details 
-
-##############################################################
-#                                                            #
-#                       TASKS DETAILS                        #
-#                                                            #
-##############################################################
-#                                                  #         #
-#                      DETAIL                      #  VALUE  #
-#                                                  #         #
-##############################################################
-#                                                  #         #
-#                   total number                   #   28    #
-#                notification tasks                #    1    #
-#         notification tasks not executed          #    1    #
-#                propagation tasks                 #    5    #
-#          propagation tasks not executed          #    3    #
-#                    push tasks                    #   11    #
-#             push tasks not executed              #   11    #
-#                 scheduled tasks                  #    1    #
-#           scheduled tasks not executed           #    1    #
-#              synchronization tasks               #   10    #
-#        synchronization tasks not executed        #   10    #
-#  synchronization tasks with full reconciliation  #    5    #
-#                   running jobs                   #    0    #
-#                  scheduled jobs                  #    1    #
-#                                                  #         #
-##############################################################
-
---
-
-===== List option
-Running the command with this option you will see the list of selected tasks type with their information.
-
-[source]
---
-$ ./syncopeadm.sh - task --list {TASK-TYPE}
-   Task type: NOTIFICATION / PROPAGATION / PUSH / SCHEDULED / SYNCHRONIZATION
---
-
-[source]
---
-
-You are runnig: task --list SCHEDULED 
-
- - Scheduled task key: 5
-     name: SampleJob Task
-     cron expression: 0 0 0 1 * ?
-     description: null
-     start date: null
-     end date: null
-     last execution: null
-     next execution: Tue Dec 01 00:00:00 CET 2015
-     latest execution status: 
-     job delegate class: org.apache.syncope.fit.core.reference.TestSampleJobDelegate
-
---
-
-The last snippet code shows the information of the scheduled tasks.
-
-===== List running jobs
-Running the command with this option you will see the list of the actual running jobs.
-
-[source]
---
-$ ./syncopeadm.sh task --list-running-jobs
---
-
-[source]
---
- - There is NOT running jobs available
---
-
-===== List scheduled jobs
-Running the command with this option you will see the list of the actual scheduled jobs.
-
-[source]
---
-$ ./syncopeadm.sh task --list-scheduled-jobs
---
-
-[source]
---
- EXECUTIONS: 
-     - task execution key: 0
-       task: 5
-       message: 
-       ###############     <BEGIN MESSAGE>     ###############
-       message: null
-       ###############     <END   MESSAGE>     ###############
-       status: NORMAL
-       start date: Fri Nov 27 15:11:23 CET 2015
-       end date: null
---
-
-===== Read option
-The option to read all the information of specified tasks.
-
-[source]
---
-$ ./syncopeadm.sh task --read {TASK-ID} {TASK-ID} [...]
---
-
-Unlike the list option, the read one shows only the tasks passed as input. Below the commad to read the task with 
-id 13
-[source]
---
-You are runnig: task --read 13 
-
- - Push task key: 13
-     name: Export on resource-testdb2
-     resource: resource-testdb2
-     cron expression: null
-     description: null
-     is perform create: true
-     is perform delete: true
-     is perform update: true
-     is sync status: true
-     start date: null
-     end date: null
-     last execution: null
-     next execution: null
-     latest execution status: 
-     filters: {GROUP=name==_NO_ONE_, USER=surname==Vivaldi}
-     delegate class: null
-     action class: []
-     matching rule: IGNORE
-     not matching rule: ASSIGN
---
-
-===== Read execution option
-The option to read all the information of executions task.
-
-[source]
---
-$ ./syncopeadm.sh task --read-execution {TASK-EXEC-ID} {TASK-EXEC-ID} [...]
---
-
-===== Delete option
-The option to delete a specified tasks.
-
-[source]
---
-$ ./syncopeadm.sh task --delete {TASK-ID} TASK-ID} [...]
---
-
-The delete option, as can be imagined, tries to remove a specified tasks.
-[source]
---
- - task {TASK-ID} successfully deleted
---
-
-===== Delete execution option
-The option to delete a specified execution tasks.
-[source]
---
-$ ./syncopeadm.sh task --delete {TASK-EXEC-ID} {TASK-EXEC-ID} [...]
---
-
-The delete option, as can be imagined, tries to remove a specified execution tasks.
-[source]
---
- - task {TASK-EXEC-ID} successfully deleted
---
-
-===== Execute option
-The option to execute a specified execution tasks.
-[source]
---
-$ ./syncopeadm.sh task --execute {TASK-ID} {DRY-RUN}
-          Dry run: true / false
---
-
-For instance, executing the PUSH task with id 13 in dry run mode the result is
-[source]
---
- You are runnig: task --execute 13 false 
-     EXECUTIONS: 
-     - task execution key: 0
-       task: 13
-       message: 
-       ###############     <BEGIN MESSAGE>     ###############
-       message: Job fired; waiting for results...
-       ###############     <END   MESSAGE>     ###############
-       status: JOB_FIRED
-       start date: Fri Nov 27 16:02:24 CET 2015
-       end date: null
---
-then reading again the task id you will find the execution results among the other task information
-[source]
---
-- Push task key: 13
-     name: Export on resource-testdb2
-     resource: resource-testdb2
-     cron expression: null
-     description: null
-     is perform create: true
-     is perform delete: true
-     is perform update: true
-     is sync status: true
-     start date: Fri Nov 27 16:02:24 CET 2015
-     end date: Fri Nov 27 16:02:26 CET 2015
-     last execution: null
-     next execution: null
-     latest execution status: SUCCESS
-     filters: {GROUP=name==_NO_ONE_, USER=surname==Vivaldi}
-     delegate class: null
-     action class: []
-     matching rule: IGNORE
-     not matching rule: ASSIGN
-     EXECUTIONS: 
-     - task execution key: 15
-       task: 13
-       message: 
-       ###############     <BEGIN MESSAGE>     ###############
-       message: Users [created/failures]: 1/0 [updated/failures]: 0/0 [deleted/failures]: 0/0 [no operation/ignored]: 0/0
-Groups [created/failures]: 0/0 [updated/failures]: 0/0 [deleted/failures]: 0/0 [no operation/ignored]: 0/0
-Any objects [created/failures]: 0/0 [updated/failures]: 0/0 [deleted/failures]: 0/0 [no operation/ignored]: 0/0
-
-Users created:
-CREATE SUCCESS (id/name): 3/vivaldi 
-
-Users updated:
-
-Users deleted:
-
-Users no operation:
-
-Users ignored:
-
-
-Groups created:
-
-Groups updated:
-
-Groups deleted:
-
-Groups no operation:
-
-Groups ignored:
-
-
-Any objects created:
-
-Any objects updated:
-
-Any objects deleted:
-
-Any objects no operation:
-
-Any objects ignored:
-
-       ###############     <END   MESSAGE>     ###############
-       status: SUCCESS
-       start date: Fri Nov 27 16:02:24 CET 2015
-       end date: Fri Nov 27 16:02:26 CET 2015
---
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/cli-user.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/cli-user.adoc b/src/main/asciidoc/cli/cli-user.adoc
deleted file mode 100644
index 155de69..0000000
--- a/src/main/asciidoc/cli/cli-user.adoc
+++ /dev/null
@@ -1,535 +0,0 @@
-//
-// Licensed to the Apache Software Foundation (ASF) under one
-// or more contributor license agreements.  See the NOTICE file
-// distributed with this work for additional information
-// regarding copyright ownership.  The ASF licenses this file
-// to you under the Apache License, Version 2.0 (the
-// "License"); you may not use this file except in compliance
-// with the License.  You may obtain a copy of the License at
-//
-//   http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing,
-// software distributed under the License is distributed on an
-// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-// KIND, either express or implied.  See the License for the
-// specific language governing permissions and limitations
-// under the License.
-//
-
-==== User command
-The user command serves to retrieve the information about the users.
-
-===== Help message
-[source,bash]
-----
-Usage: user [options]
-  Options:
-    --help 
-    --list 
-    --details 
-    --get-user-key
-       Syntax: --get-user-key {USERNAME} {USERNAME} [...]
-    --get-username
-       Syntax: --get-username {USER-ID} {USER-ID} [...]
-    --read 
-       Syntax: --read {USER-ID} {USER-ID} [...]
-    --search-by-attribute 
-       Syntax: --search-by-attribute {REALM} {ATTR-NAME}={ATTR-VALUE}
-    --search-by-role 
-       Syntax: --search-by-role {REALM} {ROLE-ID}
-    --search-by-resource 
-       Syntax: --search-by-resource {REALM} {RESOURCE-NAME}
-    --delete 
-       Syntax: --delete {USER-ID} {USER-ID} [...]
-    --delete-all 
-       Syntax: --delete-all {REALM}
-    --delete-by-attribute 
-       Syntax: --delete-by-attribute {REALM} {ATTR-NAME}={ATTR-VALUE}
-----
-
-===== Details option
-This option shows a table with some details about the users.
-
-[source]
---
-$ ./syncopeadm.sh user --details
---
-
-[source]
---
-
-You are runnig: user --details 
-
-#################################
-#                               #
-#         USERS DETAILS         #
-#                               #
-#################################
-#                     #         #
-#       DETAIL        #  VALUE  #
-#                     #         #
-#################################
-#                     #         #
-#    Total number     #    5    #
-#       Active        #    5    #
-#      Suspended      #    0    #
-#  Without resources  #    0    #
-#    Without roles    #    2    #
-#                     #         #
-#################################
-
---
-
-===== List option
-Running the command with this option you will see the list of all user in the environment but, before the execution, 
-the system will ask you a confirmation because as you can imagine this operation might produce very heavy output.
-
-[source]
---
-$ ./syncopeadm.sh user --list
---
-[source]
---
-You are runnig: user --list 
-
-This operation might produce very heavy output. Do you want to continue? [yes/no]
-yes
-
- > USER ID: 2
-    username: verdi
-    realm: /
-    status: active
-    RESOURCES: 
-       - ws-target-resource-list-mappings-1
-       - ws-target-resource-list-mappings-2
-    ROLES: 
-    creation date: Wed Oct 20 11:00:00 CEST 2010
-    change password date: null
-    PLAIN ATTRIBUTES: 
-       fullname: [Giuseppe Verdi]
-       firstname: [Giuseppe]
-       surname: [Verdi]
-       userId: [verdi@apache.org]
-       email: [verdi@syncope.org]
-    DERIVED ATTRIBUTES: 
-       info: [verdi - 2010-10-20T11:00:00+0200[0]] - is readonly.
-       noschema: [Verdi, ] - is readonly.
-       cn: [Verdi, Giuseppe] - is readonly.
-    VIRTUAL ATTRIBUTES: 
-    creator: admin
-    last modifier: admin
-    token: null
-    token expiration time: null
-    last change: Wed Oct 20 11:00:00 CEST 2010
-    last login: null
-    failed logins: 0
-RELATIONSHIPS:
-    security question id: null
-    security question answer id: null
-
---
-
-===== Get user key option
-The option to get the user key starting from an username.
-
-[source]
---
-$ ./syncopeadm.sh user --get-user-key {USERNAME}
---
-
-[source]
---
-You are runnig: user --get-user-key rossini 
-
- - rossini user ID is 1
---
-
-===== Get username option
-The option to get the username starting from an user id.
-
-[source]
---
-$ ./syncopeadm.sh user --get-user-key {USER-ID}
---
-
-[source]
---
-You are runnig: user --get-username 1 
-
- - 1 username is rossini
---
-
-===== Read by user id option
-The option to read user information by his user id.
-
-[source]
---
-$ ./syncopeadm.sh user --read {USER-ID} {USER-ID} [...]
---
-
-[source]
---
-
-You are runnig: user --read 1 
-
- > USER ID: 1
-    username: rossini
-    realm: /even
-    status: active
-    RESOURCES: 
-       - resource-testdb2
-       - ws-target-resource-2
-    ROLES: 
-       - Other
-    creation date: Wed Oct 20 11:00:00 CEST 2010
-    change password date: null
-    PLAIN ATTRIBUTES: 
-       type: [G]
-       fullname: [Gioacchino Rossini]
-       firstname: [Gioacchino]
-       surname: [Rossini]
-       userId: [rossini@apache.org]
-       loginDate: [2009-05-26, 2010-05-26]
-    DERIVED ATTRIBUTES: 
-       info: [rossini - 2010-10-20[0]] - is readonly.
-       noschema: [Rossini, ] - is readonly.
-       cn: [Rossini, Gioacchino] - is readonly.
-    VIRTUAL ATTRIBUTES: 
-    creator: admin
-    last modifier: admin
-    token: null
-    token expiration time: null
-    last change: Wed Oct 20 11:00:00 CEST 2010
-    last login: null
-    failed logins: 0
-RELATIONSHIPS:
-    security question id: null
-    security question answer id: null
-
---
-
-===== Read by username option
-The option to read user information by his username.
-
-[source]
---
-$ ./syncopeadm.sh user --read {USERNAME} {USERNAME} [...]
---
-
-[source]
---
-
-You are runnig: user --read rossini
-
- > USER ID: 1
-    username: rossini
-    realm: /even
-    status: active
-    RESOURCES: 
-       - resource-testdb2
-       - ws-target-resource-2
-    ROLES: 
-       - Other
-    creation date: Wed Oct 20 11:00:00 CEST 2010
-    change password date: null
-    PLAIN ATTRIBUTES: 
-       type: [G]
-       fullname: [Gioacchino Rossini]
-       firstname: [Gioacchino]
-       surname: [Rossini]
-       userId: [rossini@apache.org]
-       loginDate: [2009-05-26, 2010-05-26]
-    DERIVED ATTRIBUTES: 
-       info: [rossini - 2010-10-20[0]] - is readonly.
-       noschema: [Rossini, ] - is readonly.
-       cn: [Rossini, Gioacchino] - is readonly.
-    VIRTUAL ATTRIBUTES: 
-    creator: admin
-    last modifier: admin
-    token: null
-    token expiration time: null
-    last change: Wed Oct 20 11:00:00 CEST 2010
-    last login: null
-    failed logins: 0
-RELATIONSHIPS:
-    security question id: null
-    security question answer id: null
-
---
-
-===== Search by attribute option
-The option to searcn a list of users with a common attribute.
-
-[source]
---
-$ ./syncopeadm.sh user --search-by-attribute {REALM} {ATTR-NAME}={ATTR-VALUE}
---
-
-For instance if you want to search the active users under the root realm:
-
-[source]
---
-
-You are runnig: user --search-by-attribute / status=active 
-
- > USER ID: 2
-    username: verdi
-    realm: /
-    status: active
-    RESOURCES: 
-       - ws-target-resource-list-mappings-1
-       - ws-target-resource-list-mappings-2
-    ROLES: 
-    creation date: Wed Oct 20 11:00:00 CEST 2010
-    change password date: null
-    PLAIN ATTRIBUTES: 
-       fullname: [Giuseppe Verdi]
-       firstname: [Giuseppe]
-       surname: [Verdi]
-       userId: [verdi@apache.org]
-       email: [verdi@syncope.org]
-    DERIVED ATTRIBUTES: 
-       info: [verdi - 2010-10-20T11:00:00+0200[0]] - is readonly.
-       noschema: [Verdi, ] - is readonly.
-       cn: [Verdi, Giuseppe] - is readonly.
-    VIRTUAL ATTRIBUTES: 
-    creator: admin
-    last modifier: admin
-    token: null
-    token expiration time: null
-    last change: Wed Oct 20 11:00:00 CEST 2010
-    last login: null
-    failed logins: 0
-RELATIONSHIPS:
-    security question id: null
-    security question answer id: null
-
- > USER ID: 3
-    username: vivaldi
-    realm: /
-    status: active
-    RESOURCES: 
-       - ws-target-resource-delete
-       - ws-target-resource-1
-       - ws-target-resource-2
-[...]
---
-
-===== Search by role option
-The option to searcn a list of users with a specified role.
-
-[source]
---
-$ ./syncopeadm.sh user --search-by-role {REALM} {ROLE-NAME}
---
-
-[source]
---
-
-You are runnig: user --search-by-role / Other 
-
- > USER ID: 1
-    username: rossini
-    realm: /even
-    status: active
-    RESOURCES: 
-       - resource-testdb2
-       - ws-target-resource-2
-    ROLES: 
-       - Other
-    creation date: Wed Oct 20 11:00:00 CEST 2010
-    change password date: null
-    PLAIN ATTRIBUTES: 
-       type: [G]
-       fullname: [Gioacchino Rossini]
-       firstname: [Gioacchino]
-       surname: [Rossini]
-       userId: [rossini@apache.org]
-       loginDate: [2009-05-26, 2010-05-26]
-    DERIVED ATTRIBUTES: 
-       info: [rossini - 2010-10-20[0]] - is readonly.
-       noschema: [Rossini, ] - is readonly.
-       cn: [Rossini, Gioacchino] - is readonly.
-    VIRTUAL ATTRIBUTES: 
-    creator: admin
-    last modifier: admin
-    token: null
-    token expiration time: null
-    last change: Wed Oct 20 11:00:00 CEST 2010
-    last login: null
-    failed logins: 0
-RELATIONSHIPS:
-    security question id: null
-    security question answer id: null
-
---
-
-===== Search by resource option
-The option to searcn a list of users with a specified resource.
-
-[source]
---
-$ ./syncopeadm.sh user --search-by-resource {REALM} {RESOURCE-NAME}
---
-
-[source]
---
-
-You are runnig: user --search-by-resource / ws-target-resource-2 
-
- > USER ID: 3
-    username: vivaldi
-    realm: /
-    status: active
-    RESOURCES: 
-       - ws-target-resource-delete
-       - ws-target-resource-1
-       - ws-target-resource-2
-    ROLES: 
-    creation date: Wed Oct 20 11:00:00 CEST 2010
-    change password date: null
-    PLAIN ATTRIBUTES: 
-       firstname: [Antonio]
-       surname: [Vivaldi]
-       fullname: [Antonio Vivaldi]
-       userId: [vivaldi@apache.org]
-       email: [vivaldi@syncope.org]
-       type: [F]
-    DERIVED ATTRIBUTES: 
-       cn: [Vivaldi, Antonio] - is readonly.
-       noschema: [Vivaldi, ] - is readonly.
-       info: [vivaldi - 2010-10-20T11:00:00+0200[0]] - is readonly.
-    VIRTUAL ATTRIBUTES: 
-    creator: admin
-    last modifier: admin
-    token: null
-    token expiration time: null
-    last change: Wed Oct 20 11:00:00 CEST 2010
-    last login: null
-    failed logins: 0
-RELATIONSHIPS:
-    security question id: null
-    security question answer id: null
-
- > USER ID: 1
-    username: rossini
-    realm: /even
-    status: active
-    RESOURCES: 
-       - resource-testdb2
-       - ws-target-resource-2
-    ROLES: 
-       - Other
-    creation date: Wed Oct 20 11:00:00 CEST 2010
-    change password date: null
-    PLAIN ATTRIBUTES: 
-       type: [G]
-       fullname: [Gioacchino Rossini]
-       firstname: [Gioacchino]
-       surname: [Rossini]
-       userId: [rossini@apache.org]
-       loginDate: [2009-05-26, 2010-05-26]
-    DERIVED ATTRIBUTES: 
-       info: [rossini - 2010-10-20[0]] - is readonly.
-       noschema: [Rossini, ] - is readonly.
-       cn: [Rossini, Gioacchino] - is readonly.
-    VIRTUAL ATTRIBUTES: 
-    creator: admin
-    last modifier: admin
-    token: null
-    token expiration time: null
-    last change: Wed Oct 20 11:00:00 CEST 2010
-    last login: null
-    failed logins: 0
-RELATIONSHIPS:
-    security question id: null
-    security question answer id: null
-
---
-
-===== Delete option
-The option to delete a specified user.
-
-[source]
---
-$ ./syncopeadm.sh user --delete {{USER-ID} {USER-ID} [...]
---
-
-The delete option, as can be imagined, tries to remove a specified user.
-[source]
---
- - User {USER-ID} successfully deleted
---
-
-===== Delete by attribute option
-The option to delete the users with a common attribute.
-
-[source]
---
-$ ./syncopeadm.sh user --delete-by-attribute {REALM} {ATTR-NAME}={ATTR-VALUE}
---
-
-[source]
---
- You are runnig: user --delete-by-attribute / surname=Rossini 
-
- - Deleted users: 1
---
-
-===== Delete all option
-The option to delete all users of the realm passe as input.
-
-[source]
---
-$ ./syncopeadm.sh user --delete-all {REALM}
---
-
-The delete option, as can be imagined, tries to remove every users under the passed realm.
-
-[NOTE]
-To run this operation the system asks you again the admin credential.
-
-[source]
---
-You are runnig: user --delete-all / 
-
-Running this operation you will delete all the realm users managed by Syncope, are you sure? [yes/no]
-yes
-
-Username:
-admin
-
-Password:
-password
-Deleting process started
-
- - Deleted users: 2
-
-#########################
-#                       #
-#   USERS NOT DELETED   #
-#                       #
-#########################
-#           #           #
-#  USER ID  #   CAUSE   #
-#           #           #
-#########################
-#           #           #
-#     5     #  FAILURE  #
-#           #           #
-#########################
-
---
-
-As you can read the output is composed of two parts.
-The first one is the number of deleted users; the second one is a table with the users (user id) don't removed.
-
-To know the reason why the deletion failed you need to run the command with the standard delete option.
-
-[source]
---
-You are runnig: user --delete 5 
-
- - Error: GroupOwnership [6 director]
---
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/cli.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/cli.adoc b/src/main/asciidoc/cli/cli.adoc
index 4d6784d..b97345c 100644
--- a/src/main/asciidoc/cli/cli.adoc
+++ b/src/main/asciidoc/cli/cli.adoc
@@ -18,40 +18,40 @@
 //
 === CLI
 
-include::cli-introduction.adoc[]
+include::introduction.adoc[]
 
-include::cli-installation.adoc[]
+include::installation.adoc[]
 
-include::cli-connector.adoc[]
+include::connector.adoc[]
 
-include::cli-question.adoc[]
+include::question.adoc[]
 
-include::cli-role.adoc[]
+include::role.adoc[]
 
-include::cli-configuration.adoc[]
+include::configuration.adoc[]
 
-include::cli-logger.adoc[]
+include::logger.adoc[]
 
-include::cli-task.adoc[]
+include::task.adoc[]
 
-include::cli-notification.adoc[]
+include::notification.adoc[]
 
-include::cli-schema.adoc[]
+include::schema.adoc[]
 
-include::cli-user.adoc[]
+include::user.adoc[]
 
-include::cli-report.adoc[]
+include::report.adoc[]
 
-include::cli-resource.adoc[]
+include::resource.adoc[]
 
-include::cli-policy.adoc[]
+include::policy.adoc[]
 
-include::cli-info.adoc[]
+include::info.adoc[]
 
-include::cli-entitlement.adoc[]
+include::entitlement.adoc[]
 
-include::cli-domain.adoc[]
+include::domain.adoc[]
 
-include::cli-realm.adoc[]
+include::realm.adoc[]
 
-include::cli-group.adoc[]
\ No newline at end of file
+include::group.adoc[]
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/configuration.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/configuration.adoc b/src/main/asciidoc/cli/configuration.adoc
new file mode 100644
index 0000000..9bb0884
--- /dev/null
+++ b/src/main/asciidoc/cli/configuration.adoc
@@ -0,0 +1,172 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Configuration command
+The configuration command serves to retrieve the information about the Syncope configuration.
+
+===== Help message
+[source,bash]
+----
+Usage: configuration [options]
+  Options:
+    --help 
+    --get 
+    --read 
+       Syntax: --read {CONF-NAME} {CONF-NAME} [...] 
+    --update 
+       Syntax: --update {CONF-NAME}={CONF-VALUE} {CONF-NAME}={CONF-VALUE} [...]
+    --delete 
+       Syntax: --delete {CONF-NAME} {CONF-NAME} [...]
+    --export 
+       Syntax: --export {WHERE-DIR}
+
+----
+
+===== Get option
+This get option shows a table with the Syncope configuration.
+
+[source]
+--
+$ ./syncopeadm.sh configuration --get
+--
+
+[source]
+--
+
+You are runnig: configuration --get 
+
+########################################################
+#                                                      #
+#                SYNCOPE CONFIGURATION                 #
+#                                                      #
+########################################################
+#                                  #                   #
+#            ATTRIBUTE             #       VALUE       #
+#                                  #                   #
+########################################################
+#                                  #                   #
+#    password.cipher.algorithm     #       SHA1        #
+#  notificationjob.cronExpression  #  0/20 * * * * ?   #
+#     notification.maxRetries      #         3         #
+#           token.length           #        256        #
+#         token.expireTime         #        60         #
+#     selfRegistration.allowed     #       true        #
+#      passwordReset.allowed       #       true        #
+#  passwordReset.securityQuestion  #       true        #
+#     authentication.statuses      #  created, active  #
+#        log.lastlogindate         #       true        #
+#    tasks.interruptMaxRetries     #        20         #
+#      return.password.value       #       false       #
+#                                  #                   #
+########################################################
+
+--
+
+===== Read option
+The option to read the value of a specified configuration attributes.
+
+[source]
+--
+$ ./syncopeadm.sh configuration --read {CONF-NAME} {CONF-NAME} [...]
+--
+
+[source]
+--
+
+You are runnig: configuration --read passwordReset.allowed 
+
+#####################################
+#                                   #
+#       SYNCOPE CONFIGURATION       #
+#                                   #
+#####################################
+#                         #         #
+#        ATTRIBUTE        #  VALUE  #
+#                         #         #
+#####################################
+#                         #         #
+#  passwordReset.allowed  #  true   #
+#                         #         #
+#####################################
+
+--
+
+===== Update option
+The option to update a value of a specified configuration attributes.
+
+[source]
+--
+$ ./syncopeadm.sh configuration --update {CONF-NAME}={CONF-VALUE} {CONF-NAME}={CONF-VALUE} [...]
+--
+
+[source]
+--
+
+You are runnig: configuration --update passwordReset.allowed=false 
+
+#####################################
+#                                   #
+#  UPDATED CONFIGURATION ATTRIBUTES #
+#                                   #
+#####################################
+#                         #         #
+#        ATTRIBUTE        #  VALUE  #
+#                         #         #
+#####################################
+#                         #         #
+#  passwordReset.allowed  #  false  #
+#                         #         #
+#####################################
+
+--
+
+===== Delete option
+The option to delete a specified configuration attributes.
+
+[source]
+--
+$ ./syncopeadm.sh configuration --delete {CONF-NAME} {CONF-NAME} [...]
+--
+
+The delete option, as can be imagined, tries to remove a specified roles. 
+The output will be something like:
+[source]
+--
+ - Configuration {CONF-NAME} successfully deleted
+--
+
+===== Export option
+The option to export the Syncope configuration under specified directory.
+
+[source]
+--
+$ ./syncopeadm.sh  - Usage: configuration --export {WHERE-DIR}
+--
+
+[source,xml]
+----
+<?xml version="1.0" encoding="UTF-8" standalone="no"?><dataset>
+<RELATIONSHIPTYPE DESCRIPTION="Models the act that an object is included in another" NAME="inclusion"/>
+<RELATIONSHIPTYPE NAME="neighborhood"/>
+<PASSWORDPOLICY ALLOWNULLPASSWORD="1" DESCRIPTION="a password policy" HISTORYLENGTH="1" ID="2" TYPE="PASSWORD"/>
+<PASSWORDPOLICY ALLOWNULLPASSWORD="1" DESCRIPTION="sample password policy" HISTORYLENGTH="0" ID="4" TYPE="PASSWORD"/>
+<PASSWORDPOLICY ALLOWNULLPASSWORD="0" DESCRIPTION="sample password policy" HISTORYLENGTH="0" ID="8" TYPE="PASSWORD"/>
+
+[...]
+----
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/connector.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/connector.adoc b/src/main/asciidoc/cli/connector.adoc
new file mode 100644
index 0000000..bf508a5
--- /dev/null
+++ b/src/main/asciidoc/cli/connector.adoc
@@ -0,0 +1,259 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Connector command
+The connector command serves to retrieve the information around the connector configuration in Apache Syncope.
+
+===== Help message
+[source,bash]
+----
+Usage: connector [options]
+  Options:
+    --help 
+    --details 
+    --list 
+    --list-bundles 
+    --list-configuration-properties
+       Syntax: --list-configuration-properties {CONNECTOR-ID} {CONNECTOR-ID} [...]
+    --read 
+       Syntax: --read {CONNECTOR-ID} {CONNECTOR-ID} [...]
+    --delete 
+       Syntax: --delete {CONNECTOR-ID} {CONNECTOR-ID} [...]
+----
+
+===== Details option
+This option shows a table with some details about connectors and bundles.
+
+[source]
+--
+$ ./syncopeadm.sh connector --details
+--
+
+[source]
+--
+
+You are runnig: connector --details 
+
+######################################
+#                                    #
+#         CONNECTORS DETAILS         #
+#                                    #
+######################################
+#                          #         #
+#          DETAIL          #  VALUE  #
+#                          #         #
+######################################
+#                          #         #
+#       Total number       #    9    #
+#  With create capability  #    8    #
+#  With delete capability  #    7    #
+#  With search capability  #    8    #
+#   With sync capability   #    4    #
+#  With update capability  #    8    #
+#      Bundles number      #    8    #
+#                          #         #
+######################################
+
+--
+
+Total number::
+    number of created connectors;
+With create capability::
+    number of connectors configured with create capability;
+With delete capability::
+    number of connectors configured with delete capability;
+With search capability::
+    number of connectors configured with search capability;
+With sync capability::
+    number of connectors configured with sync capability;
+With update capability::
+    number of connectors configured with update capability;
+Bundles number::
+    number of bundles read by Syncope.
+
+===== List option
+Running the command with this option you will see the list of connectors with their configuration.
+
+[source]
+--
+$ ./syncopeadm.sh connector --list
+--
+
+[source]
+--
+
+You are runnig: connector --list 
+
+ > CONNECTOR ID: 108
+    bundle name: net.tirasa.connid.bundles.db.scriptedsql
+    connector name: net.tirasa.connid.bundles.db.scriptedsql.ScriptedSQLConnector
+    display name: Scripted SQL
+    location: connid://testconnectorserver@localhost:4554
+    version: 2.2.3-SNAPSHOT
+    timeout: 10
+    CAPABILITIES:
+       - CREATE
+       - SEARCH
+       - DELETE
+       - UPDATE
+       - SYNC
+    CONFIGURATION:
+       name: enableEmptyString
+       values: [false]
+       type: boolean
+       display name: Enable writing empty string
+       help message: <b>Enable writing empty string</b><br/>Select to enable support for writing an empty strings, instead of a NULL value, in character based columns defined as not-null in the table schema. This option does not influence the way strings are written for Oracle based tables. By default empty strings are written as a NULL value.
+       order: 12
+       default values: [false]
+       confidential: false
+       required: false
+       overridable: false
+
+       name: autoCommit
+       values: [true]
+       type: boolean
+       display name: autoCommit
+       help message: autoCommit
+       order: 0
+       default values: [true]
+       confidential: false
+       required: false
+       overridable: false
+
+       name: testScriptFileName
+       values: [/home/massi/Lavoro/syncopeMaster/fit/core-reference/target/test-classes/scriptedsql/TestScript.groovy]
+       type: java.lang.String
+       display name: testScriptFileName
+       help message: testScriptFileName
+       order: 0
+       default values: []
+       confidential: false
+       required: false
+       overridable: true
+
+--
+
+The last snippet code shows a part of the screen output. Basically you can read the configuration about every connectors
+configured in Syncope.
+
+===== List bundles option
+Running the command with this option you will see the list of the bundles available in Syncope.
+
+[source]
+--
+$ ./syncopeadm.sh connector --list-bundles
+--
+
+[source]
+--
+
+You are runnig: connector --list-bundles 
+
+ > BUNDLE NAME: net.tirasa.connid.bundles.soap
+    connector name: net.tirasa.connid.bundles.soap.WebServiceConnector
+    display name: net.tirasa.connid.bundles.soap.WebServiceConnector
+    location: file:/home/massi/Lavoro/syncopeMaster/fit/core-reference/target/bundles/
+    version: 1.4.0-SNAPSHOT
+ > BUNDLE NAME: net.tirasa.connid.bundles.db.scriptedsql
+    connector name: net.tirasa.connid.bundles.db.scriptedsql.ScriptedSQLConnector
+    display name: Scripted SQL Connector
+    location: file:/home/massi/Lavoro/syncopeMaster/fit/core-reference/target/bundles/
+    version: 2.2.3-SNAPSHOT
+ > BUNDLE NAME: net.tirasa.connid.bundles.ldap
+    connector name: net.tirasa.connid.bundles.ldap.LdapConnector
+    display name: net.tirasa.connid.bundles.ldap.LdapConnector
+    location: file:/home/massi/Lavoro/syncopeMaster/fit/core-reference/target/bundles/
+    version: 1.5.0-SNAPSHOT
+ > BUNDLE NAME: net.tirasa.connid.bundles.ad
+    connector name: net.tirasa.connid.bundles.ad.ADConnector
+    display name: net.tirasa.connid.bundles.ad.ADConnector
+    location: file:/home/massi/Lavoro/syncopeMaster/fit/core-reference/target/bundles/
+    version: 1.3.0-SNAPSHOT
+ > BUNDLE NAME: net.tirasa.connid.bundles.db.table
+    connector name: net.tirasa.connid.bundles.db.table.DatabaseTableConnector
+    display name: Database Table Connector
+    location: file:/home/massi/Lavoro/syncopeMaster/fit/core-reference/target/bundles/
+    version: 2.2.3-SNAPSHOT
+ > BUNDLE NAME: net.tirasa.connid.bundles.csvdir
+    connector name: net.tirasa.connid.bundles.csvdir.CSVDirConnector
+    display name: net.tirasa.connid.bundles.csvdir.CSVDirConnector
+    location: file:/home/massi/Lavoro/syncopeMaster/fit/core-reference/target/bundles/
+    version: 0.8.2
+ > BUNDLE NAME: net.tirasa.connid.bundles.db.table
+    connector name: net.tirasa.connid.bundles.db.table.DatabaseTableConnector
+    display name: Database Table Connector
+    location: connid://testconnectorserver@localhost:4554
+    version: 2.2.3-SNAPSHOT
+ > BUNDLE NAME: net.tirasa.connid.bundles.db.scriptedsql
+    connector name: net.tirasa.connid.bundles.db.scriptedsql.ScriptedSQLConnector
+    display name: Scripted SQL Connector
+    location: connid://testconnectorserver@localhost:4554
+    version: 2.2.3-SNAPSHOT
+
+--
+
+The most useful information are:
+
+location::
+    where the bundle is, it could be on the same server where Syncope is deployed or on a remote one linked by 
+connid protocol;
+version:
+    the bundle version;
+
+===== List configuration properties option
+The option to read only the configuration of specified connectors.
+
+[source]
+--
+$ ./syncopeadm.sh connector --list-configuration-properties {CONNECTOR-ID} {CONNECTOR-ID} [...]
+--
+
+The output is only the configuration of the connectors passed as input.
+
+===== Read option
+The option to read all the information of specified connectors.
+
+[source]
+--
+$ ./syncopeadm.sh connector --read {CONNECTOR-ID} {CONNECTOR-ID} [...]
+--
+
+Unlike the list option, the read one shows only the connectors passed as input.
+
+===== Delete option
+The option to delete a specified connectors.
+
+[source]
+--
+$ ./syncopeadm.sh connector --delete {CONNECTOR-ID} {CONNECTOR-ID} [...]
+--
+
+The delete option, as can be imagined, tries to remove a specified connectors. This operation works only if the 
+connector isn't associated to a resource.
+If the connector isn't associated to anything the output will be
+[source]
+--
+ - Connector {CONNECTOR-ID} successfully deleted
+--
+
+otherwise the output will be something like:
+[source]
+--
+ - Error: AssociatedResources [ws-target-resource-nopropagation, ws-target-resource-nopropagation2]
+--
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/domain.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/domain.adoc b/src/main/asciidoc/cli/domain.adoc
new file mode 100644
index 0000000..3ff78d9
--- /dev/null
+++ b/src/main/asciidoc/cli/domain.adoc
@@ -0,0 +1,95 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Domain command
+The domain command serves to retrieve the information about the configured domains.
+
+===== Help message
+[source,bash]
+----
+Usage: domain [options]
+  Options:
+    --help 
+    --details 
+    --list 
+    --delete 
+       Syntax: --delete {DOMAIN-NAME} {DOMAIN-NAME} [...]
+----
+
+===== Details option
+This option shows a table with domain amount.
+
+[source]
+--
+$ ./syncopeadm.sh domain --details
+--
+
+[source]
+--
+
+You are runnig: domain --details 
+
+############################
+#                          #
+#     DOMAINS DETAILS      #
+#                          #
+############################
+#                #         #
+#     DETAIL     #  VALUE  #
+#                #         #
+############################
+#                #         #
+#  Total number  #    1    #
+#                #         #
+############################
+
+--
+
+===== List option
+Running the command with this option you will see the list of the domains.
+
+[source]
+--
+$ ./syncopeadm.sh domain --list 
+--
+
+[source]
+--
+
+You are runnig: domain --list 
+
+ > DOIMAIN NAME: Two
+    chiper algorithm: SHA
+
+--
+
+===== Delete option
+The option to delete a specified domain.
+
+[source]
+--
+$ ./syncopeadm.sh domain --delete {DOMAIN-NAME} {DOMAIN-NAME} [...]
+--
+
+The delete option, as can be imagined, tries to remove a specified domain. 
+The output will be something like:
+[source]
+--
+ - Domain {DOMAIN-NAME} successfully deleted
+--
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/entitlement.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/entitlement.adoc b/src/main/asciidoc/cli/entitlement.adoc
new file mode 100644
index 0000000..c7bc30f
--- /dev/null
+++ b/src/main/asciidoc/cli/entitlement.adoc
@@ -0,0 +1,140 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Entitlement command
+The entitlement command serves to retrieve the information about the entitlments.
+
+===== Help message
+[source,bash]
+----
+Usage: entitlement [options]
+  Options:
+    --help 
+    --list
+    --list-role
+       Syntax: --list-role {ENTITLEMENT-NAME}
+    --read-by-username
+       Syntax: --read-by-username {USERNAME}
+    --read-by-userid
+       Syntax: --read-by-userid {USER-ID}
+    --search-by-role
+       Syntax: --search-by-role {ROLE-ID}
+----
+
+===== List option
+Running the command with this option you will see the list of the entitlements.
+
+[source]
+--
+$ ./syncopeadm.sh entitlement --list
+--
+
+[source]
+--
+
+You are runnig: entitlement --list 
+
+- CONNECTOR_READ
+- NOTIFICATION_DELETE
+- ANYTYPE_UPDATE
+- RELATIONSHIPTYPE_UPDATE
+- SCHEMA_CREATE
+[...]
+
+--
+
+===== List role option
+Running the command with this option you will see the list of the roles with a certain entitlement.
+
+[source]
+--
+$ ./syncopeadm.sh entitlement --list
+--
+
+[source]
+--
+
+You are runnig: entitlement --list-role PRINTER_DELETE 
+
+ > ROLE ID: Search for realm evenTwo
+    REALMS: 
+       - /even/two
+
+ > ROLE ID: User manager
+    REALMS: 
+       - /
+
+ > ROLE ID: User reviewer
+    REALMS: 
+       - /odd
+       - /even
+
+ > ROLE ID: Other
+    REALMS: 
+       - /odd
+
+--
+
+===== Read by username option
+The option to read the entitlements of the username passed as input.
+
+[source]
+--
+$ ./syncopeadm.sh entitlement --read-by-username {USERNAME}
+--
+[source]
+--
+You are runnig: entitlement --read-by-username rossini 
+
+- GROUP_READ
+- SCHEMA_READ
+- WORKFLOW_FORM_CLAIM
+--
+
+===== Read by userid option
+The option to read the entitlements of the userid passed as input.
+
+[source]
+--
+$ ./syncopeadm.sh entitlement --read-by-userid {USER-ID}
+--
+[source]
+--
+You are runnig: entitlement --read-by-userid 5 
+
+- USER_READ
+- USER_SEARCH
+--
+
+===== Search by role option
+The option to read the entitlements of a certain role.
+
+[source]
+--
+$ ./syncopeadm.sh entitlement --search-by-role {ROLE-ID}
+--
+
+[source]
+--
+You are runnig: entitlement --search-by-role Other 
+
+- SCHEMA_READ
+- GROUP_READ
+- WORKFLOW_FORM_CLAIM
+--
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/group.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/group.adoc b/src/main/asciidoc/cli/group.adoc
new file mode 100644
index 0000000..c9a41a2
--- /dev/null
+++ b/src/main/asciidoc/cli/group.adoc
@@ -0,0 +1,206 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Group command
+The group command serves to retrieve the information about the configured groups.
+
+===== Help message
+[source,bash]
+----
+Usage: group [options]
+  Options:
+    --help 
+    --details 
+    --list 
+    --read 
+       Syntax: --read {GROUP-ID} {GROUP-ID} [...]
+    --read-attr-by-schema-type {GROUP-ID} {SCHEMA-TYPE}
+       Schema type: PLAIN / DERIVED / VIRTUAL
+    --read-attr-by-schema {GROUP-ID} {SCHEMA-TYPE} {SCHEMA-NAME}
+       Schema type: PLAIN / DERIVED / VIRTUAL
+    --delete 
+       Syntax: --delete {GROUP-ID} {GROUP-ID} [...]
+----
+
+===== Details option
+This option shows a table with group amount and some information.
+
+[source]
+--
+$ ./syncopeadm.sh group --details
+--
+
+[source]
+--
+
+You are runnig: group --details 
+
+##################################
+#                                #
+#         GROUPS DETAILS         #
+#                                #
+##################################
+#                      #         #
+#        DETAIL        #  VALUE  #
+#                      #         #
+##################################
+#                      #         #
+#     Total number     #   16    #
+#  Without resources   #   10    #
+#  Without attributes  #    0    #
+#    On root realm     #   14    #
+#  On the other realm  #    2    #
+#                      #         #
+##################################
+
+--
+
+===== List option
+Running the command with this option you will see the list of the groups.
+
+[source]
+--
+$ ./syncopeadm.sh group --list 
+--
+
+[source]
+--
+
+You are runnig: group --list 
+
+ > GROUP ID: 1
+    name: root
+    type: GROUP
+    realm: /
+    status: null
+    user owner: null
+    group owner: null
+    RESOURCES: 
+    PLAIN ATTRIBUTES: 
+     - icon: [niceIcon]
+
+     - show: [true]
+
+     - rderived_sx: [sx]
+
+     - rderived_dx: [dx]
+
+    DERIVED ATTRIBUTES: 
+     - displayProperty: [niceIcon: true] - is readonly
+
+     - rderiveddata: [sx-dx] - is readonly
+
+     - rderivedschema: [sx-dx] - is readonly
+
+     - rderToBePropagated: [sx-dx] - is readonly
+
+    VIRTUAL ATTRIBUTES: 
+    [...]
+
+--
+
+===== Read option
+The option to read the group passed as input.
+
+[source]
+--
+$ ./syncopeadm.sh group --read {GROUP-ID} {GROUP-ID} [...] 
+--
+
+[source]
+--
+
+You are runnig: group --read 15 
+
+ > GROUP ID: 15
+    name: additional
+    type: GROUP
+    realm: /even
+    status: null
+    user owner: null
+    group owner: null
+    RESOURCES: 
+    PLAIN ATTRIBUTES: 
+    DERIVED ATTRIBUTES: 
+     - displayProperty: [: ] - is readonly
+
+     - rderToBePropagated: [-] - is readonly
+
+     - rderiveddata: [-] - is readonly
+
+     - rderivedschema: [-] - is readonly
+
+    VIRTUAL ATTRIBUTES: 
+
+--
+
+===== Read attribute of type option
+The option to read the specified attribute type of the group passed as input.
+
+[source]
+--
+$ ./syncopeadm.sh  group --read-attr-by-schema-type {GROUP-ID} {SCHEMA-TYPE}
+   Schema type: PLAIN / DERIVED / VIRTUAL
+--
+
+[source]
+--
+
+You are runnig: group --read-attr-by-schema-type 15 DERIVED 
+     - displayProperty: [: ] - is readonly
+
+     - rderToBePropagated: [-] - is readonly
+
+     - rderiveddata: [-] - is readonly
+
+     - rderivedschema: [-] - is readonly
+
+--
+
+===== Read an attribute of type option
+The option to read the specified attribute name of the group passed as input.
+
+[source]
+--
+$ ./syncopeadm.sh  group --read-attr-by-schema {GROUP-ID} {SCHEMA-TYPE} {SCHEMA-NAME}
+   Schema type: PLAIN / DERIVED / VIRTUAL
+--
+
+[source]
+--
+
+You are runnig: group --read-attr-by-schema 12 PLAIN title 
+     - title: [r12]
+
+--
+
+===== Delete option
+The option to delete a specified group.
+
+[source]
+--
+$ ./syncopeadm.sh group --delete {GROUP-ID} {GROUP-ID} [...]
+--
+
+The delete option, as can be imagined, tries to remove a specified group. 
+The output will be something like:
+[source]
+--
+ - Group {GROUP-ID} successfully deleted
+--
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/info.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/info.adoc b/src/main/asciidoc/cli/info.adoc
new file mode 100644
index 0000000..2186862
--- /dev/null
+++ b/src/main/asciidoc/cli/info.adoc
@@ -0,0 +1,52 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Info command
+The info command serves to show some information about the Syncope installation.
+
+===== Help message
+[source,bash]
+----
+Usage: info [options]
+  Options:
+    --version
+    --pwd-reset-allowed
+    --pwd-reset-with-question
+    --self-reg-allowed
+    --provisioning-manager-classes
+    --workflow-adapter-classes
+    --account-rules-classes
+    --connid-locations
+    --reconciliation-filter-builders
+    --logic-actions
+    --mail-templates
+    --mapping-item-transformers
+    --password-rules
+    --propagation-actions
+    --push-actions
+    --push-correlation-actions
+    --reportlets
+    --sync-actions
+    --sync-correlation-rules
+    --task-jobs
+    --validators
+    --password-generator
+    --vir-attr-cache
+    --help
+----
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/installation.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/installation.adoc b/src/main/asciidoc/cli/installation.adoc
new file mode 100644
index 0000000..1f93808
--- /dev/null
+++ b/src/main/asciidoc/cli/installation.adoc
@@ -0,0 +1,181 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Installation command
+The installation process serves to create a file, called _cli.properties_, uses by the script to call the Apache Syncope
+REST API services with the right credentials.
+
+The obtained file will be something like
+ 
+* *syncope.rest.services*=http://localhost:9080/syncope/rest
+* *syncope.admin.user*=admin
+* *syncope.admin.password*=QePSFVTnzwQowM4ohhaUYcE6aW47MVZ/
+
+where the properties are:
+
+syncope.rest.services::
+    is the URL where the Apache Syncope REST API services listening;
+syncope.admin.user::
+    is the user with the right permissions to call the Syncope APIs;
+syncope.admin.password::
+    is the user password;
+
+as you can read, the user password is encrypted. This only to add a security level to avoid that another user could 
+read an admin password.
+
+===== Help message
+[source,bash]
+----
+Usage: install [options]
+  Options:
+    --help 
+    --setup
+    --setup-debug
+----
+
+===== Run the installation
+After the zip file is unzipped you can start with CLI client using the syncopeadm file.
+If you tried to run a CLI command before installation process the script returns
+[source]
+--
+ - Error: It seems you need to setup the CLI client before. Run install --setup.
+--
+
+So, as suggested, you have to run the install command to use the CLI:
+[source]
+--
+$ ./syncopeadm.sh install --setup
+--
+
+A successful result will be:
+[source,bash]
+----
+
+You are runnig: install --setup 
+
+###############################################
+#                                             #
+# Welcome to Syncope CLI installation process #
+#                                             #
+###############################################
+
+Path to config files of Syncope CLI client will be: ./
+- File system permission checked
+
+Syncope server schema [http/https]: http
+Syncope server hostname [e.g. localhost]: localhost
+Syncope server port [e.g. 8080]: 9080
+Syncope server rest context [e.g. /syncope/rest/]: /syncope/rest
+Syncope admin user: admin
+Syncope admin password: password
+Installation parameters checked on Syncope core version: 2.0.0-SNAPSHOT
+
+###############################################
+#                                             #
+#           Installation successful           #
+#     now you can use Syncope CLI client      #
+#                                             #
+###############################################
+
+----
+
+During the installation you have to provide:
+
+Syncope server schema::
+    the http protocol used by the Apache Syncope core, it will be http or https;
+Syncope server hostname::
+    the hostname where the core is deployed;
+Syncope server port::
+    the port where the services are listening;
+Syncope server rest context::
+    the context wherewith the rest services are deployed (/syncope/rest is the default one);
+Syncope admin user::
+    the user with the right permissions to call the Syncope APIs;
+Syncope admin password::
+    the user password.
+
+===== Installation error
+The causes to get an error may be different, below some result samples.
+
+* Syncope unreachable (or wrong address):
+
+[source]
+--
+
+Provided address :http://localhost:9080/syncope/rest
+
+###############################################
+#                                             #
+#       Provided address is unreachable!      #
+#         Check it and if it is wrong         #
+#        START AGAIN the installation!        #
+#                                             #
+###############################################
+
+--
+
+* Authentication failed:
+
+[source]
+--
+
+###############################################
+#                                             #
+#   Username or password provided are wrong   #
+#        START AGAIN the installation!        #
+#                                             #
+###############################################
+
+--
+
+As the message suggested you have to start again the installation when error occurred.
+
+
+===== Debug installation
+To work with the debug environment provided by Syncope we added a particular installation option for it.
+It enough to run the script with the --setup-debug option
+[source]
+--
+$ ./syncopeadm.sh install --setup
+--
+[source,bash]
+----
+
+You are runnig: install --setup-debug 
+
+###############################################
+#                                             #
+# Welcome to Syncope CLI installation process #
+#                                             #
+###############################################
+
+Path to config files of Syncope CLI client will be: ./
+- File system permission checked
+
+Installation parameters checked on Syncope core version: 2.0.0-SNAPSHOT
+
+###############################################
+#                                             #
+#           Installation successful           #
+#     now you can use Syncope CLI client      #
+#                                             #
+###############################################
+
+----
+

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/introduction.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/introduction.adoc b/src/main/asciidoc/cli/introduction.adoc
new file mode 100644
index 0000000..e7bf329
--- /dev/null
+++ b/src/main/asciidoc/cli/introduction.adoc
@@ -0,0 +1,34 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Introduction
+A brief introduction about this document and the examples you will find reading it.
+
+Once you downloaded and uzipped the zip file containing the scripts, you will find a lib directory and the 
+two script files, a .bat and a .sh one, called _syncopeadm_. According with your operating system you will use 
+one of them.
+
+[NOTE]
+Every examples of this document is executed on a linux machine with _debug environment_ up.
+
+[NOTE]
+As the Wikipedia page suggests a https://en.wikipedia.org/wiki/Command-line_interface[command line interface] (CLI) 
+is a means of interacting with a computer program where the user (or client) issues commands to the program 
+in the form of successive lines of text (command lines). In our case the CLI tool is the way to call, more or less, 
+every Syncope core commands through a shell.
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/logger.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/logger.adoc b/src/main/asciidoc/cli/logger.adoc
new file mode 100644
index 0000000..83b93c0
--- /dev/null
+++ b/src/main/asciidoc/cli/logger.adoc
@@ -0,0 +1,250 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Logger command
+The logger command serves to retrieve the information about the logger configuration in Apache Syncope.
+
+===== Help message
+[source,bash]
+----
+Usage: logger [options]
+  Options:
+    --help 
+    --details 
+    --list 
+    --read 
+       Syntax: --read {LOG-NAME} {LOG-NAME} [...]
+    --update 
+       Syntax: --update {LOG-NAME}={LOG-LEVEL} {LOG-NAME}={LOG-LEVEL} [...]
+    --update-all 
+       Syntax: --update-all {LOG-LEVEL} 
+    --create 
+       Syntax: --create {LOG-NAME}={LOG-LEVEL} {LOG-NAME}={LOG-LEVEL} [...]
+    --delete 
+       Syntax: --delete {LOG-NAME} {LOG-NAME} [...]
+----
+
+===== Details option
+This option shows a table with some details about logger configuration.
+
+[source]
+--
+$ ./syncopeadm.sh logger --details
+--
+
+[source]
+--
+
+You are runnig: logger --details 
+
+############################
+#                          #
+#     LOGGERS DETAILS      #
+#                          #
+############################
+#                #         #
+#     DETAIL     #  VALUE  #
+#                #         #
+############################
+#                #         #
+#  Total number  #   16    #
+#  Set to DEBUG  #    2    #
+#  Set to ERROR  #    3    #
+#  Set to FATAL  #    0    #
+#  Set to INFO   #   11    #
+#   Set to OFF   #    0    #
+#  Set to TRACE  #    0    #
+#  Set to WARN   #    0    #
+#                #         #
+############################
+
+--
+
+===== List option
+Running the command with this option you will see the table of the loggers configuration.
+
+[source]
+--
+$ ./syncopeadm.sh logger --list
+--
+
+[source]
+--
+
+You are runnig: logger --list 
+
+############################################################################
+#                                                                          #
+#                               LIST LOGGERS                               #
+#                                                                          #
+############################################################################
+#                                                                #         #
+#                             LOGGER                             #  LEVEL  #
+#                                                                #         #
+############################################################################
+#                                                                #         #
+#                    org.springframework.web                     #  INFO   #
+#                 org.apache.syncope.core.logic                  #  INFO   #
+#                       net.tirasa.connid                        #  DEBUG  #
+#                           org.quartz                           #  INFO   #
+#              org.apache.syncope.core.persistence               #  INFO   #
+#                          org.activiti                          #  ERROR  #
+#                        org.apache.http                         #  INFO   #
+#                    org.springframework.orm                     #  INFO   #
+#                        org.apache.camel                        #  ERROR  #
+#                         org.apache.cxf                         #  ERROR  #
+#                       org.apache.syncope                       #  INFO   #
+#                     org.identityconnectors                     #  DEBUG  #
+#                      org.springframework                       #  INFO   #
+#              org.apache.syncope.core.provisioning              #  INFO   #
+#                  org.apache.syncope.core.rest                  #  INFO   #
+#  org.apache.syncope.core.provisioning.api.ConnIdBundleManager  #  INFO   #
+#                                                                #         #
+############################################################################
+
+--
+
+===== Read option
+The option to read all the information of specified loggers.
+
+[source]
+--
+$ ./syncopeadm.sh logger --read {LOG-NAME} {LOG-NAME} [...]
+--
+
+Unlike the list option, the read one shows a table with only the loggers passed as input.
+
+===== Update option
+The option to change the value of the logger passed as input.
+
+[source]
+--
+$ ./syncopeadm.sh logger --update {LOG-NAME}={LOG-LEVEL} {LOG-NAME}={LOG-LEVEL} [...]
+--
+
+[source]
+--
+
+You are runnig: logger --update org.apache.camel=DEBUG 
+
+####################################
+#                                  #
+#         UPDATED LOGGERS          #
+#                                  #
+####################################
+#                    #             #
+#       LOGGER       #  NEW LEVEL  #
+#                    #             #
+####################################
+#                    #             #
+#  org.apache.camel  #    DEBUG    #
+#                    #             #
+####################################
+
+--
+
+===== Update all option
+This option is especially helpful in production environment when every log is disable and you need to change them for a 
+while in DEBUG mode.
+
+[source]
+--
+$ ./syncopeadm.sh logger --update-all DEBUG
+--
+
+[source]
+--
+
+You are runnig: logger --update-all DEBUG 
+
+################################################################################
+#                                                                              #
+#                               UPDATED LOGGERS                                #
+#                                                                              #
+################################################################################
+#                                                                #             #
+#                             LOGGER                             #  NEW LEVEL  #
+#                                                                #             #
+################################################################################
+#                                                                #             #
+#                    org.springframework.web                     #    DEBUG    #
+#                 org.apache.syncope.core.logic                  #    DEBUG    #
+#                       net.tirasa.connid                        #    DEBUG    #
+#                           org.quartz                           #    DEBUG    #
+#              org.apache.syncope.core.persistence               #    DEBUG    #
+#                          org.activiti                          #    DEBUG    #
+#                        org.apache.http                         #    DEBUG    #
+#                    org.springframework.orm                     #    DEBUG    #
+#                         org.apache.cxf                         #    DEBUG    #
+#                       org.apache.syncope                       #    DEBUG    #
+#                     org.identityconnectors                     #    DEBUG    #
+#                      org.springframework                       #    DEBUG    #
+#              org.apache.syncope.core.provisioning              #    DEBUG    #
+#                  org.apache.syncope.core.rest                  #    DEBUG    #
+#  org.apache.syncope.core.provisioning.api.ConnIdBundleManager  #    DEBUG    #
+#                                                                #             #
+################################################################################
+
+--
+
+===== Create option
+For the moment the logger command is one of the few command with a create option to add a new logger configuration.
+
+[source]
+--
+$ ./syncopeadm.sh logger --create net.tirasa=ERROR
+--
+
+[source]
+--
+
+You are runnig: logger --create net.tirasa=ERROR 
+
+##############################
+#                            #
+#      UPDATED LOGGERS       #
+#                            #
+##############################
+#              #             #
+#    LOGGER    #  NEW LEVEL  #
+#              #             #
+##############################
+#              #             #
+#  net.tirasa  #    ERROR    #
+#              #             #
+##############################
+
+--
+
+===== Delete option
+The option to delete a specified logger.
+
+[source]
+--
+$ ./syncopeadm.sh logger --delete {LOG-NAME} {LOG-NAME} [...]
+--
+
+[source]
+--
+
+You are runnig: logger --delete org.apache.camel 
+
+ - Logger org.apache.camel successfully deleted
+
+--
\ No newline at end of file

http://git-wip-us.apache.org/repos/asf/syncope/blob/39950ccf/src/main/asciidoc/cli/notification.adoc
----------------------------------------------------------------------
diff --git a/src/main/asciidoc/cli/notification.adoc b/src/main/asciidoc/cli/notification.adoc
new file mode 100644
index 0000000..d25beb1
--- /dev/null
+++ b/src/main/asciidoc/cli/notification.adoc
@@ -0,0 +1,116 @@
+//
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+
+==== Notification command
+The notification command serves to retrieve the information about the configured notification.
+
+===== Help message
+[source,bash]
+----
+Usage: notification [options]
+  Options:
+    --help 
+    --list 
+    --read 
+       Syntax: --read {NOTIFICATION-ID} 
+    --delete 
+       Syntax: --delete {NOTIFICATION-ID}
+----
+
+===== List option
+Running the command with this option you will see the list of notificaitons with their configuration.
+
+[source]
+--
+$ ./syncopeadm.sh notification --list
+--
+
+[source]
+--
+
+You are runnig: notification --list 
+
+ > NOTIFICATION ID: 1
+    events: [[CUSTOM]:[]:[]:[requestPasswordReset]:[SUCCESS]]
+    sender: admin@syncope.apache.org
+    subject: Password Reset request
+    recipients: null
+    recipient attribute name: email
+    template: requestPasswordReset
+    abouts: {USER=token!=$null}
+    recipient attribute types: UserPlainSchema
+    static recipient: []
+    trace level: FAILURES
+    active: true
+    self as recipient: true
+
+ > NOTIFICATION ID: 2
+    events: [[CUSTOM]:[]:[]:[confirmPasswordReset]:[SUCCESS]]
+    sender: admin@syncope.apache.org
+    subject: Password Reset successful
+    recipients: null
+    recipient attribute name: email
+    template: confirmPasswordReset
+    abouts: {}
+    recipient attribute types: UserPlainSchema
+    static recipient: []
+    trace level: FAILURES
+    active: true
+    self as recipient: true
+
+ > NOTIFICATION ID: 10
+    events: [[CUSTOM]:[]:[]:[unexisting1]:[FAILURE], [CUSTOM]:[]:[]:[unexisting2]:[SUCCESS]]
+    sender: test@syncope.apache.org
+    subject: Test subject
+    recipients: $groups==7
+    recipient attribute name: email
+    template: test
+    abouts: {USER=fullname==*o*;fullname==*i*}
+    recipient attribute types: UserPlainSchema
+    static recipient: []
+    trace level: FAILURES
+    active: true
+    self as recipient: false
+
+--
+
+===== Read option
+The option to read all the information of specified notification.
+
+[source]
+--
+$ ./syncopeadm.sh notification --read {NOTIFICATION-ID} {NOTIFICATION-ID} [...]
+--
+
+Unlike the list option, the read one shows only the notifications passed as input.
+
+===== Delete option
+The option to delete a specified notification.
+
+[source]
+--
+$ ./syncopeadm.sh notification --delete {NOTIFICATION-ID} {NOTIFICATION-ID} [...]
+--
+
+The delete option, as can be imagined, tries to remove a specified notification. 
+The output will be something like:
+[source]
+--
+ - security notification {NOTIFICATION-ID} successfully deleted
+--
\ No newline at end of file


Mime
View raw message