royale-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Carlos Rovira <carlosrov...@apache.org>
Subject Re: [Discuss] Start release process 0.9.3
Date Fri, 12 Oct 2018 00:09:12 GMT
Hi Alex,
if you check in actual develop for "0.9.5-SNAPSHOT" and "0.9.4-SNAPSHOT"
you'll see maven build compiler and typedefs 0.9.5-SNAPSHOT, but when build
framework, it downloads compiler and typedefs 0.9.4-SNAPSHOT since the
versions in framework are not updated. This is the reason you don't see any
fail when building with maven. If you update all to use the same number it
will fail. I recommend you as well to remove royale folder in your local
.m2 to see how maven generates compiler and typedefs and then download
other version.

Maybe the rest of people didn't see this because they use ANT and that
build system is not affected by the release process. But I think we can't
left the failed release process without revert it for days, since we are
all seeing different things.

For example, I was able to run your MX RO example with ANT, but I can make
it work with Maven, what means to me that I still can't use it since my
entire project is in maven.

I'm trying to fix this for several hours now and still couldn't test mx RO
nor working on my project...

I'm closing for today with all messed up. Tomorrow will try again, or will
need to block me in a branch to be able to continue working.

Thanks

Carlos





El vie., 12 oct. 2018 a las 1:53, Alex Harui (<aharui@adobe.com.invalid>)
escribió:

> The 0.9.4 release branch has been cut.  I have not seen any problems
> reported against it, so I don't know of any reason to delete it.  Thus, the
> develop branch should be at 0.9.5-SNAPSHOT.
>
> I noticed you messed around with the versions so I have no idea what state
> we are in, plus I continue to see that tags are being updated.  You will
> probably have to stop using your Git GUI.  We cannot have tags be modified.
>
> -Alex
>
> On 10/11/18, 3:14 PM, "Carlos Rovira" <carlosrovira@apache.org> wrote:
>
>     Hi,
>
>     I'm a bit confused with the actual state of the repo. We should stay in
>     0.9.4-SNAPSHOT? or 0.9.5-SNAPSHOT?
>     I'm building with the latest since 1-2 days but removed all royale
> folder
>     with all maven artifacts and rebuild from scratch, makes me have mixed
>     versions, since some artifacts are downloading 0.9.4 instead of use
> 0.9.5
>
>     Piotr, seems nobody  take the request to continue with the release for
> now,
>     so I propose to stabilize the repo.
>
>     Thoughts?
>
>     Carlos
>
>
>
>
>
>     El jue., 11 oct. 2018 a las 20:33, Piotr Zarzycki (<
>     piotrzarzycki21@gmail.com>) escribió:
>
>     > Hi Alex,
>     >
>     > Unfortunately in the next couple of days I won't have time for that.
> If
>     > someone can do that feel free jump into it.
>     >
>     > Piotr
>     >
>     > On Thu, Oct 11, 2018, 6:43 PM Alex Harui <aharui@adobe.com.invalid>
> wrote:
>     >
>     > > After digging through the output you pasted, it appears that the
>     > > "check-empty-folder" target isn't quite right and didn't catch
> that you
>     > > didn't run "maven" against an empty folder.  Although I am a bit
> puzzled
>     > > why there were modified files in the working copy.
>     > >
>     > > Maven and the scripts have some expectation that you are starting
> from
>     > the
>     > > beginning, so if Maven got far enough to create a tag and you have
> to
>     > start
>     > > over, you have to remove the tag.  These scripts are still under
>     > > development so you should not expect that every situation has been
>     > > accounted for.
>     > >
>     > > So, go delete the tag.  Instructions for doing so are in the
> wiki.  Maybe
>     > > figure out why those files were modified, but maybe because your
> earlier
>     > > run didn't have the right gpg password.
>     > >
>     > > Try changing the check-empty-folder to also test for:
>     > >
>     > >         <available file="${basedir}/royale-asjs/build.properties"
>     > >             type="file"
>     > >             property="found.build.properties" value="true" />
>     > >
>     > > Then it should catch you on the steps where you are supposed to
> start by
>     > > pulling down the repos again.
>     > >
>     > > If you don't have time for any of that, let us know here so the
> next RM
>     > > can know where to start.
>     > >
>     > > -Alex
>     > >
>     > > On 10/11/18, 2:05 AM, "Piotr Zarzycki" <piotrzarzycki21@gmail.com>
>     > wrote:
>     > >
>     > >     I gave up again :) It costs me to much time. I thought since
> Om did
>     > so
>     > > much
>     > >     progress I will launch the script and will work. It's still
> failing.
>     > >
>     > >
>     > >
>     >
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FWJ44&amp;data=02%7C01%7Caharui%40adobe.com%7C7c0ea8e9184948214bd708d62fc6f7bc%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748928943992619&amp;sdata=CFWLhE7oI2pHZxOiwACtVmfMj8wohAbA3DnOeXgd8vs%3D&amp;reserved=0
>     > >
>     > >     I run first time and had problem with gpg password - just
> forgot it,
>     > > but
>     > >     run it again and type correct password. Probably first time
> this tag
>     > > was
>     > >     created and now script failing cause tag exits. Never ending
> story.
>     > >
>     > >     I'm in that step - If someone would like to try it out let me
> know
>     > and
>     > > I
>     > >     won't revert anything for now:
>     > >
>     > >     ant -f releasecandidate.xml -Drelease.version="0.9.4"
>     > > -Dbrowser="c:\Program
>     > >     Files\Mozilla Firefox\firefox.exe" -Drc=1 maven
>     > >
>     > >     Thanks,
>     > >     Piotr
>     > >
>     > >
>     > >     czw., 11 paź 2018 o 10:13 Piotr Zarzycki <
> piotrzarzycki21@gmail.com>
>     > >     napisał(a):
>     > >
>     > >     > Hi Alex,
>     > >     >
>     > >     > This is what I'm getting for git status for royale-compiler
> [1]
>     > >     >
>     > >     > [1]
>     > >
>     >
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FYuiH&amp;data=02%7C01%7Caharui%40adobe.com%7C7c0ea8e9184948214bd708d62fc6f7bc%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748928944002615&amp;sdata=V50Y98oIF4e26BqGHAapQWDoLApb4TxexoDZ7P7WGaM%3D&amp;reserved=0
>     > >     >
>     > >     > Thanks,
>     > >     > Piotr
>     > >     >
>     > >     > śr., 10 paź 2018 o 17:50 Alex Harui <aharui@adobe.com.invalid
> >
>     > > napisał(a):
>     > >     >
>     > >     >> What does 'git status' return for that local copy of the
>     > > royale-compiler
>     > >     >> repo?
>     > >     >>
>     > >     >> That part of the script is trying to see if
> compiler-jburg-types
>     > and
>     > >     >> compiler-build-tools needed a version update that needs to
> be
>     > > pushed.
>     > >     >> Those two projects should be at 1.0.0 since we rarely, if
> ever,
>     > > will need
>     > >     >> to modify it.  There shouldn't have been modifications in
> this
>     > > release, yet
>     > >     >> Git status is reporting modifications to some file.  A test
> is
>     > done
>     > > to
>     > >     >> check for the word "modified:" in the 'git status' output,
> then
>     > that
>     > >     >> attempt to push is executed.  Somehow, the git status is
> implying
>     > >     >> modifications but the files we are trying to push are not
>     > modified.
>     > >     >>
>     > >     >> The solutions should not require reverting of the release
> branch.
>     > > It
>     > >     >> looks like you have successfully created a correct set of
> branches
>     > > and the
>     > >     >> steps you are running start by pulling down the release
> branch.  I
>     > > didn't
>     > >     >> see any commits to the release branch from the scripts, so
> to
>     > > re-start, it
>     > >     >> should just be manually deleting the local copies of the
> repos and
>     > > running
>     > >     >> the Ant command again after making one of the changes to
>     > >     >> releasecandidate.xml I will describe below:
>     > >     >>
>     > >     >> IMO, the choices are (and there may be more choices)
>     > >     >> 1.  Figure out how to be smarter about what 'git status'
> output
>     > > will say
>     > >     >> so the test works correctly
>     > >     >> 2. Set failonerror="false" on the push step and not care if
> that
>     > > push
>     > >     >> succeeds.  This is slightly risky if we ever do want to push
>     > > changes, but
>     > >     >> again, that is low probability, IMO.
>     > >     >> 3. Comment out those steps since it will be rare we will
> need
>     > > them.  If
>     > >     >> we do need them some day, the RM will have to remember to
>     > uncomment
>     > > those
>     > >     >> steps.
>     > >     >>
>     > >     >> HTH,
>     > >     >> -Alex
>     > >     >>
>     > >     >> On 10/10/18, 2:52 AM, "Piotr Zarzycki" <
> piotrzarzycki21@gmail.com
>     > >
>     > >     >> wrote:
>     > >     >>
>     > >     >>     Ok It's failed :) However I passed step 3 in
> instruction. Step
>     > > 4 is
>     > >     >> failing
>     > >     >>     [1] - if someone know what could it be - I will wait
> with
>     > > reverting
>     > >     >> changes.
>     > >     >>
>     > >     >>     Lines in stacktrace are pointing in ant script to
> following
>     > > targets:
>     > >     >>
>     > >     >>     Line 556: git-commit-and-push-utils
>     > >     >>     Line 487: git-commit-and-push-utils-if-modified
>     > >     >>     Line 473:
>     > >     >>
>     > >     >>     <exec executable="${git}" dir="${compiler}"
>     > failonerror="true" >
>     > >     >>                 <arg value="commit" />
>     > >     >>                 <arg value="-m" />
>     > >     >>                 <arg value="remove SNAPSHOT from
>     > > compiler-jburg-types and
>     > >     >>     compiler-build-tools versions" />
>     > >     >>             </exec>
>     > >     >>
>     > >     >>     [1]
>     > >     >>
>     > >
>     >
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2Fbg5e&amp;data=02%7C01%7Caharui%40adobe.com%7C7c0ea8e9184948214bd708d62fc6f7bc%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748928944002615&amp;sdata=Xk6y%2FTfm7z2ggaECmFAZeDb4PJQKQOxm5C4Yuu9jWhY%3D&amp;reserved=0
>     > >     >>
>     > >     >>     Thanks,
>     > >     >>     Piotr
>     > >     >>
>     > >     >>
>     > >     >>     śr., 10 paź 2018 o 11:34 Carlos Rovira <
>     > carlosrovira@apache.org
>     > > >
>     > >     >> napisał(a):
>     > >     >>
>     > >     >>     > Ok Piotr, good luck! :)
>     > >     >>     >
>     > >     >>     > El mié., 10 oct. 2018 a las 10:34, Piotr Zarzycki (<
>     > >     >>     > piotrzarzycki21@gmail.com>) escribió:
>     > >     >>     >
>     > >     >>     > > Hi Guys,
>     > >     >>     > >
>     > >     >>     > > I will try right now process from my PC. We will
> see how
>     > > far I
>     > >     >> will go
>     > >     >>     > with
>     > >     >>     > > that.
>     > >     >>     > >
>     > >     >>     > > Piotr
>     > >     >>     > >
>     > >     >>     > > czw., 4 paź 2018 o 22:01 Alex Harui
>     > > <aharui@adobe.com.invalid>
>     > >     >>     > napisał(a):
>     > >     >>     > >
>     > >     >>     > > > Hi Om,
>     > >     >>     > > >
>     > >     >>     > > > If make_branches succeeds, then you shouldn't
> need to go
>     > > back
>     > >     >> and
>     > >     >>     > delete
>     > >     >>     > > > branches and tags and run make_branches again if
> the
>     > > "maven"
>     > >     >> step
>     > >     >>     > fails.
>     > >     >>     > > >
>     > >     >>     > > > You might need to revert any changes to the
> release
>     > > branch that
>     > >     >> the
>     > >     >>     > > > "maven" step did, but then you should be able to
> delete
>     > > the
>     > >     >> local copy
>     > >     >>     > of
>     > >     >>     > > > the branches and start again with "maven" or
>     > >     >>     > > > "maven_skip_compiler_and_typedefs" if you got all
> the
>     > way
>     > > up to
>     > >     >>     > > royale-asjs.
>     > >     >>     > > >
>     > >     >>     > > > What are some of the 200+ files that don't get
> reverted
>     > > back to
>     > >     >> 0.9.4?
>     > >     >>     > > >
>     > >     >>     > > > You are welcome to try to add the "continue"
> option.  I
>     > > would
>     > >     >> suggest
>     > >     >>     > > > adding a dummy parameter.  So if the script
> currently
>     > > calls
>     > >     >> Maven like
>     > >     >>     > > this:
>     > >     >>     > > >
>     > >     >>     > > >         <exec executable="${mvn}"
>     > >     >> dir="${basedir}/maven-release-plugin"
>     > >     >>     > > > failonerror="true" >
>     > >     >>     > > >             <arg value="clean" />
>     > >     >>     > > >             <arg value="install" />
>     > >     >>     > > >         </exec>
>     > >     >>     > > >
>     > >     >>     > > > You can try changing it to something like this:
>     > >     >>     > > >
>     > >     >>     > > >         <property name="continueOption"
>     > value="-Ddummy=0"
>     > > />
>     > >     >>     > > >         <exec executable="${mvn}"
>     > >     >> dir="${basedir}/maven-release-plugin"
>     > >     >>     > > > failonerror="true" >
>     > >     >>     > > >             <arg value="${continueOption}" />
>     > >     >>     > > >             <arg value="clean" />
>     > >     >>     > > >             <arg value="install" />
>     > >     >>     > > >         </exec>
>     > >     >>     > > >
>     > >     >>     > > > Then you should be able to set in your
> local.properties:
>     > >     >>     > > >
>     > >     >>     > > > continueOption=-rf JewelExample
>     > >     >>     > > >
>     > >     >>     > > > You will probably need to use different names for
> each
>     > > call to
>     > >     >> Maven so
>     > >     >>     > > > subsequent Maven calls don't pick up the same
> option.
>     > >     >>     > > >
>     > >     >>     > > > HTH,
>     > >     >>     > > > -Alex
>     > >     >>     > > >
>     > >     >>     > > > On 10/4/18, 11:58 AM, "OmPrakash Muppirala" <
>     > >     >> bigosmallm@gmail.com>
>     > >     >>     > > wrote:
>     > >     >>     > > >
>     > >     >>     > > >     On Thu, Oct 4, 2018 at 1:48 AM Alex Harui
>     > >     >> <aharui@adobe.com.invalid
>     > >     >>     > >
>     > >     >>     > > > wrote:
>     > >     >>     > > >
>     > >     >>     > > >     > Om, it looks like you are still deleting and
>     > > recreating
>     > >     >> the
>     > >     >>     > > branches.
>     > >     >>     > > >     > Does this mean you have never completed the
>     > > make_branches
>     > >     >> step?
>     > >     >>     > > >
>     > >     >>     > > >
>     > >     >>     > > >     Yes, I delete the tags, branches (remote)
> each time
>     > >     >> something
>     > >     >>     > fails.
>     > >     >>     > > > Then
>     > >     >>     > > >     I do a global search for 0.9.5 and replace it
> with
>     > > 0.9.4
>     > >     >> (some 200+
>     > >     >>     > > > files
>     > >     >>     > > >     across 3 repos), then push them into
> remote/develop.
>     > >     >>     > > >
>     > >     >>     > > >     Then I do the make_branches step first.  Then
> do a
>     > > git push
>     > >     >> in
>     > >     >>     > > > roayale-asjs
>     > >     >>     > > >     as per the instructions in the commandline. I
> have
>     > > never
>     > >     >> had issues
>     > >     >>     > > > with
>     > >     >>     > > >     this step.  It is always the maven step that
> fails
>     > > for some
>     > >     >> reason
>     > >     >>     > or
>     > >     >>     > > > the
>     > >     >>     > > >     other.
>     > >     >>     > > >
>     > >     >>     > > >
>     > >     >>     > > >     > Is make_branches failing trying to run a
> build in
>     > > the
>     > >     >> develop
>     > >     >>     > > branch
>     > >     >>     > > > and
>     > >     >>     > > >     > uploading 0.9.5-SNAPSHOT artifacts?
>     > >     >>     > > >
>     > >     >>     > > >
>     > >     >>     > > >     No
>     > >     >>     > > >
>     > >     >>     > > >
>     > >     >>     > > >     > I supposed we could try to find a way to
> skip
>     > that,
>     > > but
>     > >     >> you will
>     > >     >>     > > need
>     > >     >>     > > >     > reliable uploading to repository.a.o to be
> an RM
>     > > without
>     > >     >> going
>     > >     >>     > > crazy.
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     > > >     Hmm, I use the same internet connection for
> personal
>     > > and
>     > >     >> work
>     > >     >>     > related
>     > >     >>     > > >     activities.  I don't usually have issues with
>     > > internet.
>     > >     >> Either we
>     > >     >>     > > are
>     > >     >>     > > > very
>     > >     >>     > > >     unlucky here or we need a more reselient way
> to pick
>     > > up
>     > >     >> things if
>     > >     >>     > we
>     > >     >>     > > > lose
>     > >     >>     > > >     internet connectivity momentarily.
>     > >     >>     > > >
>     > >     >>     > > >     It takes upwards of 90 minutes of uploading
> stuff. I
>     > > dont
>     > >     >> do this
>     > >     >>     > > kind
>     > >     >>     > > > of
>     > >     >>     > > >     uploading for my regular work, so that is
> probably I
>     > > have
>     > >     >> never hit
>     > >     >>     > > > this
>     > >     >>     > > >     issue before.
>     > >     >>     > > >
>     > >     >>     > > >     I still think that looking into the
> 'resume-from'
>     > > directive
>     > >     >> in
>     > >     >>     > maven
>     > >     >>     > > is
>     > >     >>     > > >     worthwhile.
>     > >     >>     > > >
>     > >     >>     > > >     Thanks,
>     > >     >>     > > >     Om
>     > >     >>     > > >
>     > >     >>     > > >
>     > >     >>     > > >     >
>     > >     >>     > > >     > -Alex
>     > >     >>     > > >     >
>     > >     >>     > > >     > On 10/3/18, 2:11 PM, "OmPrakash Muppirala" <
>     > >     >> bigosmallm@gmail.com
>     > >     >>     > >
>     > >     >>     > > > wrote:
>     > >     >>     > > >     >
>     > >     >>     > > >     >     On Wed, Oct 3, 2018 at 2:02 PM Alex
> Harui
>     > >     >>     > > > <aharui@adobe.com.invalid>
>     > >     >>     > > >     > wrote:
>     > >     >>     > > >     >
>     > >     >>     > > >     >     > Hi Om,
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     > Does anything deploy, or is that the
> first
>     > > thing
>     > >     >> that is
>     > >     >>     > > > attempted to
>     > >     >>     > > >     >     > deploy?  I found this article that
> might
>     > help:
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     > >
>     > >     >>     >
>     > >     >>
>     > >
>     >
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcommunity.apigee.com%2Fquestions%2F50756%2Funable-to-deploy-using-maven-script-due-to-error-r.html&amp;data=02%7C01%7Caharui%40adobe.com%7C7c0ea8e9184948214bd708d62fc6f7bc%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748928944002615&amp;sdata=y8kx6qyyaqqCInHK2yXLbXW5UUtnvP93JlY%2FfFFUd4Y%3D&amp;reserved=0
>     > >     >>     > > >     >
>     > >     >>     > > >     >
>     > >     >>     > > >     >     It deployed a lot of artifacts before
> hitting
>     > > this
>     > >     >> error.  I
>     > >     >>     > > > don't see
>     > >     >>     > > >     >     anything special with this artifact.
> So, I am
>     > >     >> guessing that
>     > >     >>     > it
>     > >     >>     > > > was a
>     > >     >>     > > >     >     momentary bad connection that caused
> this.
>     > >     >>     > > >     >
>     > >     >>     > > >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     > I would be concerned about restarting
> from
>     > the
>     > >     >> middle of a
>     > >     >>     > > > Maven
>     > >     >>     > > >     > call.  I
>     > >     >>     > > >     >     > suppose you could try it, but what if
> it
>     > > skipped an
>     > >     >>     > artifact?
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >     >     The maven error message explicitly says
> this:
>     > >     >>     > > >     >
>     > >     >>     > > >     >          [exec] [INFO] [ERROR] After
> correcting
>     > the
>     > >     >> problems, you
>     > >     >>     > > can
>     > >     >>     > > >     > resume
>     > >     >>     > > >     >     the build with the command
>     > >     >>     > > >     >
>     > >     >>     > > >     >          [exec] [INFO] [ERROR]   mvn
> <goals> -rf
>     > >     >>     > > >     >
>  :Jewel-Light-NoFlat-Primary-Sunflower-Theme
>     > >     >>     > > >     >
>     > >     >>     > > >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     > There should be Ant targets for
> starting
>     > only
>     > > on
>     > >     >>     > royale-asjs
>     > >     >>     > > if
>     > >     >>     > > >     >     > royale-compiler and royale=typedefs
> worked
>     > ok.
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     > HTH,
>     > >     >>     > > >     >     > -Alex
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     > On 10/3/18, 11:58 AM, "OmPrakash
> Muppirala"
>     > <
>     > >     >>     > > > bigosmallm@gmail.com>
>     > >     >>     > > >     > wrote:
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     >     Another suggestion I have is -
> can we do
>     > > all
>     > >     >> the pushes
>     > >     >>     > > to
>     > >     >>     > > >     > remote after
>     > >     >>     > > >     >     >     everything is done locally?  That
> way,
>     > if
>     > >     >> something
>     > >     >>     > goes
>     > >     >>     > > > wrong
>     > >     >>     > > >     >     > halfway, we
>     > >     >>     > > >     >     >     can just delete the royale-* dirs
>     > locally
>     > > and
>     > >     >> rerun the
>     > >     >>     > > >     >     > releasecandiate ant
>     > >     >>     > > >     >     >     script?
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     >     Not sure if this is an easy
> change?
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     >     Thanks,
>     > >     >>     > > >     >     >     Om
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     >     On Wed, Oct 3, 2018 at 11:42 AM
>     > OmPrakash
>     > >     >> Muppirala <
>     > >     >>     > > >     >     > bigosmallm@gmail.com>
>     > >     >>     > > >     >     >     wrote:
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >     >     > Okay, I tried a couple of times
> and I
>     > > have
>     > >     >> started
>     > >     >>     > > > getting
>     > >     >>     > > >     > `SSL peer
>     > >     >>     > > >     >     > shut
>     > >     >>     > > >     >     >     > down incorrectly errors`
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [INFO]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     >
>     > >     >>
>     > >
> ------------------------------------------------------------------------
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [INFO] BUILD
>     > FAILURE
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [INFO]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     >
>     > >     >>
>     > >
> ------------------------------------------------------------------------
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [INFO] Total
> time:
>     > > 16:04
>     > >     >> min
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [INFO]
> Finished at:
>     > >     >>     > > >     > 2018-10-03T11:38:49-07:00
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [INFO]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     >
>     > >     >>
>     > >
> ------------------------------------------------------------------------
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR]
> Failed to
>     > > execute
>     > >     >> goal
>     > >     >>     > > >     >     >     >
>     > >     >>     > >
> org.apache.maven.plugins:maven-deploy-plugin:2.8.2:deploy
>     > >     >>     > > >     >     > (default-deploy)
>     > >     >>     > > >     >     >     > on project
>     > >     >>     > Jewel-Light-NoFlat-Primary-Sunflower-Theme:
>     > >     >>     > > > Failed
>     > >     >>     > > >     > to
>     > >     >>     > > >     >     > deploy
>     > >     >>     > > >     >     >     > artifacts: Could not transfer
> artifact
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     > >
>     > >     >>     >
>     > >     >>
>     > >
>     >
> org.apache.royale.framework:Jewel-Light-NoFlat-Primary-Sunflower-Theme:swc:0.9.4
>     > >     >>     > > >     >     >     > from/to apache.releases.https (
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     > >
>     > >     >>     >
>     > >     >>
>     > >
>     >
> https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Frepository.apache.org%2Fservice%2Flocal%2Fstaging%2Fdeploy%2Fmaven2&amp;data=02%7C01%7Caharui%40adobe.com%7C7c0ea8e9184948214bd708d62fc6f7bc%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748928944002615&amp;sdata=ETJMJdSRyzhfviU%2BcjhQNqaVC5PecGPa3Pu0YBPgS24%3D&amp;reserved=0
>     > >     >>     > > >     >     > ):
>     > >     >>     > > >     >     >     > Remote host closed connection
> during
>     > >     >> handshake: SSL
>     > >     >>     > > peer
>     > >     >>     > > > shut
>     > >     >>     > > >     > down
>     > >     >>     > > >     >     >     > incorrectly -> [Help 1]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR] To
> see the
>     > > full
>     > >     >> stack
>     > >     >>     > trace
>     > >     >>     > > > of the
>     > >     >>     > > >     > errors,
>     > >     >>     > > >     >     >     > re-run Maven with the -e switch.
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR]
> Re-run
>     > Maven
>     > > using
>     > >     >> the -X
>     > >     >>     > > > switch to
>     > >     >>     > > >     > enable
>     > >     >>     > > >     >     >     > full debug logging.
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR] For
> more
>     > >     >> information about
>     > >     >>     > > the
>     > >     >>     > > >     > errors and
>     > >     >>     > > >     >     >     > possible solutions, please read
> the
>     > > following
>     > >     >>     > articles:
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR]
> [Help 1]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     > >
>     > >     >>     >
>     > >     >>
>     > >
>     >
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcwiki.apache.org%2Fconfluence%2Fdisplay%2FMAVEN%2FMojoExecutionException&amp;data=02%7C01%7Caharui%40adobe.com%7C7c0ea8e9184948214bd708d62fc6f7bc%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748928944002615&amp;sdata=kwdBnwFaYTYepWogQSAyftGXVtwDk7dst%2FIwG5TT8dY%3D&amp;reserved=0
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR] After
>     > > correcting
>     > >     >> the
>     > >     >>     > > > problems, you
>     > >     >>     > > >     > can
>     > >     >>     > > >     >     > resume
>     > >     >>     > > >     >     >     > the build with the command
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO] [ERROR]   mvn
>     > > <goals> -rf
>     > >     >>     > > >     >     >     >
>     > > :Jewel-Light-NoFlat-Primary-Sunflower-Theme
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >      [exec] [INFO]
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     >
>     > >     >>
>     > >
> ------------------------------------------------------------------------
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     > I am guessing it is a bad
> internet
>     > >     >> connection.  I am
>     > >     >>     > > > wondering
>     > >     >>     > > >     > if we
>     > >     >>     > > >     >     > can
>     > >     >>     > > >     >     >     > pass a -rf (resume from) option
> to the
>     > > maven
>     > >     >> call
>     > >     >>     > from
>     > >     >>     > > > ant?
>     > >     >>     > > >     >     > Otherwise
>     > >     >>     > > >     >     >     > doing all this from scratch
> everytime
>     > > is a
>     > >     >> big pain.
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     > Thanks,
>     > >     >>     > > >     >     >     > Om
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     > On Wed, Oct 3, 2018 at 12:47 AM
> Alex
>     > > Harui
>     > >     >>     > > >     > <aharui@adobe.com.invalid
>     > >     >>     > > >     >     > >
>     > >     >>     > > >     >     >     > wrote:
>     > >     >>     > > >     >     >     >
>     > >     >>     > > >     >     >     >> Looks like it was a missing [
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >     >> MXRoyale and SparkRoyale built
> for
>     > me.
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >     >> HTH,
>     > >     >>     > > >     >     >     >> -Alex
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >     >> On 10/3/18, 12:43 AM,
> "OmPrakash
>     > > Muppirala" <
>     > >     >>     > > >     > bigosmallm@gmail.com>
>     > >     >>     > > >     >     >     >> wrote:
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >     >>     Thanks!
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >     >>     I reverted everything back
> to
>     > > previous
>     > >     >> state.  I
>     > >     >>     > > > can give
>     > >     >>     > > >     > it a
>     > >     >>     > > >     >     > shot
>     > >     >>     > > >     >     >     >>     tomorrow evening.
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >     >>     Regards,
>     > >     >>     > > >     >     >     >>     Om
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >     >>     On Wed, Oct 3, 2018 at
> 12:41 AM
>     > > Alex
>     > >     >> Harui
>     > >     >>     > > >     >     > <aharui@adobe.com.invalid>
>     > >     >>     > > >     >     >     >> wrote:
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >     >>     > It was in a releasable
> state.
>     > >     >> TourDeFlex was
>     > >     >>     > > > running
>     > >     >>     > > >     > on it.
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     > I'm trying to track down
> the
>     > > change
>     > >     >> that broke
>     > >     >>     > > it.
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     > -Alex
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     > On 10/3/18, 12:32 AM,
>     > "OmPrakash
>     > >     >> Muppirala" <
>     > >     >>     > > >     >     > bigosmallm@gmail.com>
>     > >     >>     > > >     >     >     >> wrote:
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >     A bit more progress.
> Now we
>     > > are
>     > >     >> failing on
>     > >     >>     > > the
>     > >     >>     > > >     > MXRoyale
>     > >     >>     > > >     >     > project:
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [INFO]
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     >
>     > >     >>
>     > >
> ------------------------------------------------------------------------
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [INFO]
>     > > BUILD
>     > >     >> FAILURE
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [INFO]
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     >
>     > >     >>
>     > >
> ------------------------------------------------------------------------
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [INFO]
>     > > Total
>     > >     >> time:
>     > >     >>     > 01:34
>     > >     >>     > > > min
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [INFO]
>     > > Finished
>     > >     >> at:
>     > >     >>     > > >     >     > 2018-10-03T00:28:14-07:00
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [INFO]
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     >
>     > >     >>
>     > >
> ------------------------------------------------------------------------
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > > Failed
>     > >     >> to
>     > >     >>     > execute
>     > >     >>     > > > goal
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >
>     > >     >>     > > >
>     > > org.apache.royale.compiler:royale-maven-plugin:0.9.4:compile-as
>     > >     >>     > > >     >     >     >>     >     (default-compile-as)
> on
>     > > project
>     > >     >> MXRoyale:
>     > >     >>     > > > There were
>     > >     >>     > > >     >     > errors
>     > >     >>     > > >     >     >     >> during the
>     > >     >>     > > >     >     >     >>     >     build. Got return
> code 3 ->
>     > > [Help
>     > >     >> 1]
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > > To see
>     > >     >> the full
>     > >     >>     > > > stack
>     > >     >>     > > >     > trace of
>     > >     >>     > > >     >     > the
>     > >     >>     > > >     >     >     >> errors,
>     > >     >>     > > >     >     >     >>     >     re-run Maven with
> the -e
>     > > switch.
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > > Re-run
>     > >     >> Maven
>     > >     >>     > > using
>     > >     >>     > > > the -X
>     > >     >>     > > >     >     > switch to
>     > >     >>     > > >     >     >     >> enable
>     > >     >>     > > >     >     >     >>     > full
>     > >     >>     > > >     >     >     >>     >     debug logging.
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > > For more
>     > >     >>     > > > information
>     > >     >>     > > >     > about the
>     > >     >>     > > >     >     >     >> errors and
>     > >     >>     > > >     >     >     >>     >     possible solutions,
> please
>     > > read the
>     > >     >>     > > following
>     > >     >>     > > >     > articles:
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > > [Help 1]
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>
>     > >     >>     > > >     >     >
>     > >     >>     > > >     >
>     > >     >>     > > >
>     > >     >>     > >
>     > >     >>     >
>     > >     >>
>     > >
>     >
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcwiki.apache.org%2Fconfluence%2Fdisplay%2FMAVEN%2FMojoExecutionException&amp;data=02%7C01%7Caharui%40adobe.com%7C7c0ea8e9184948214bd708d62fc6f7bc%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636748928944002615&amp;sdata=kwdBnwFaYTYepWogQSAyftGXVtwDk7dst%2FIwG5TT8dY%3D&amp;reserved=0
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > > After
>     > >     >>     > correcting
>     > >     >>     > > > the
>     > >     >>     > > >     > problems,
>     > >     >>     > > >     >     > you
>     > >     >>     > > >     >     >     >> can
>     > >     >>     > > >     >     >     >>     > resume
>     > >     >>     > > >     >     >     >>     >     the build with the
> command
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >          [exec] [INFO]
> [ERROR]
>     > >  mvn
>     > >     >> <goals>
>     > >     >>     > -rf
>     > >     >>     > > >     > :MXRoyale
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >
>     > >     >>     > > >     >     >     >>     >     Can we perhaps turn
> this
>     > > project
>     > >     >> off?  Is
>     > >     >>     > it
>



-- 
Carlos Rovira
http://about.me/carlosrovira

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message