royale-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Alex Harui <aha...@adobe.com.INVALID>
Subject Re: [Discuss] Start release process 0.9.3
Date Mon, 17 Sep 2018 16:07:38 GMT
Last week, the develop branch was setup to release as 0.9.3 since the prior release was 0.9.2.  The scripts and defaults are not set up to skip a version so we discussed ways to skip a version.  It included:

1) Running "ant -f releasecandidate.xml update.versions"
2) Using "ant -f releasecandidate.xml make_branches" twice.

The first run would set the poms in the release branch to 0.9.3 and set the develop branch to 0.9.4-SNAPSHOT.
The second run would set the poms in the release branch to 0.9.4 and set the develop branch to 0.9.5-SNAPSHOT.

The correct state of the branches before executing step 4 in https://github.com/apache/royale-asjs/wiki/Release-Manager-Notes#release-steps is that the develop branch is set to 0.9.5-SNAPSHOT, the release branch is set to 0.9.4, and other version numbers are set to 0.9.4, such as build.properties in royale-asjs.  That's what update.versions did.  I did that a couple of days ago.

So, to answer your questions:

1) No, there shouldn't be any extra Ant targets to run at this time other than maybe running make_branches on some or all of the repos to get us to the desired state.  I think I've taken care of everything that make_branches doesn't take care of.  I did not try to get all of the Maven pieces in the 3 repos ready because I thought I saw that royale-typedefs was already ready so I didn't know where you were in the process.  Some of the targets in releasecandidate.xml run lots of Maven commands which will update the POMs.  Those targets also patch some other things that Maven needs but were hard to make work via Maven.  Since updating the Maven-related data could not be one simple Maven command, I chose to use Ant to take the RM through all of the steps.   But Ant builds do not use the POM (although I'm still thinking of teaching the compiler to read the POMs) so we have other Ant targets that update things for the Ant build of the framework.  This is normally done during the final "release" target after voting is over, but because we are skipping a version, I had to run it once a few days ago.

2)  IMO, the simplest thing to do is update the develop branch so it looks like we released a 0.9.3 before creating the final release branch for 0.9.4.  That is why I am suggesting running make_branches until you reach that state.  I think I've already taken care of the Ant properties.

When you think you've got the branches for all repos in this state, let me know and I will spot check it.

HTH,
-Alex

On 9/17/18, 2:06 AM, "Piotr Zarzycki" <piotrzarzycki21@gmail.com> wrote:

    Still don't understand what you did at all. I did make_branches. This is
    what happened so far:
    
    1) feature/0.9.4 -> branch has been created which contains 0.9.3 in poms
    2) develop has been updated to 0.9.4-SNAPSHOT
    
    Q 1: Should I run on develop ant command which updating for me some stuff ?
    - What ANT do ? Does it update pom or something else ?
    Q 2: Because we would like to jump to one version ahead - Should I run that
    ANT on RC1 branch or should I update it manually ?
    
    Thanks,
    Piotr
    
    
    pon., 17 wrz 2018 o 09:53 Alex Harui <aharui@adobe.com.invalid> napisał(a):
    
    > If you have run make_branches, then the branches should be showing 0.9.4
    > and the develop branch should be using 0.9.5.
    >
    > I already ran and pushed update.versions.  The Ant build should be using
    > 0.9.4.
    >
    > I'm stopping work for tonight.
    >
    > HTH,
    > -Alex
    >
    > On 9/17/18, 12:17 AM, "Piotr Zarzycki" <piotrzarzycki21@gmail.com> wrote:
    >
    >     I think I'm right now on steps 4 and 5 in ->
    >
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fwiki%2FRelease-Manager-Notes%23release-steps&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873623282&amp;sdata=4vj7M8%2BYgVfU6EnGXIPz%2BCyd3XxA4kZvCtlly334rww%3D&amp;reserved=0
    >
    >
    >     pon., 17 wrz 2018 o 09:16 Piotr Zarzycki <piotrzarzycki21@gmail.com>
    >     napisał(a):
    >
    >     > Hi Alex,
    >     >
    >     > I think I have passed problem with scm and was able to push RC1
    > branch,
    >     > but I don't understand what do you mean here:
    >     >
    >     > "I also ran the update.versions target.  It turns out I needed to run
    >     > several targets first from the empty folder:   use_develop_branch
    >     > clone-compiler clone-typedefs clone-asjs update.versions
    >     >
    >     > And then manually go to each repo and push the changes."
    >     >
    >     > Do you mean here that I need to run update.version target on develop
    > or on
    >     > RC branch? I understand that we are jumping one version up, so I
    > know that
    >     > probably need to be updated develop to 0.9.5-SNAPSHOT. Should I do
    > any of
    >     > that operation on RC branch as well ?
    >     >
    >     > Thanks,
    >     > Piotr
    >     >
    >     > sob., 15 wrz 2018 o 07:21 Alex Harui <aharui@adobe.com.invalid>
    >     > napisał(a):
    >     >
    >     >> Hi Piotr,
    >     >>
    >     >> I think I've figured out how to use maven-scm 1.10.0.  I have
    > switched
    >     >> the version of the release plugin to 3.0.0-SNAPSHOT.  You will have
    > to
    >     >> build your own release plugin from sources.  The latest published
    > snapshot
    >     >> is not based on the latest sources so we have to build it
    > ourselves.  I
    >     >> have added an Ant task to releasecandidate.xml called
    >     >> maven-release-plugin.  So, I would recommend starting with an empty
    > folder
    >     >> with just local.properties and the latest releasecandidate.xml and
    > running:
    >     >>
    >     >>     Ant -f releasecandidate.xml -Drelease.version=0.9.4 -Drc=1
    >     >> maven-release-plugin
    >     >>
    >     >> When that succeeds (it worked first try for me), then run:
    >     >>
    >     >>     Ant -f releasecandidate.xml -Drelease.version=0.9.4 -Drc=1
    >     >> make_branches
    >     >>
    >     >> I tried it with a dry run (by uncommenting the pushChanges=false)
    > and it
    >     >> worked for me on Windows from PowerShell.
    >     >>
    >     >> I also ran the update.versions target.  It turns out I needed to run
    >     >> several targets first from the empty folder:   use_develop_branch
    >     >> clone-compiler clone-typedefs clone-asjs update.versions
    >     >>
    >     >> And then manually go to each repo and push the changes.
    >     >>
    >     >> Hopefully you will be able to use the make_branches to update the
    > maven
    >     >> poms to 0.9 4-SNAPSHOT and then proceed with the releasecandidate.
    >     >>
    >     >> Good luck!
    >     >> -Alex
    >     >>
    >     >> On 9/14/18, 9:25 AM, "Alex Harui" <aharui@adobe.com.INVALID> wrote:
    >     >>
    >     >>     OK.  But by specifying setting-template you are giving it
    > different
    >     >> startup property values.  IMO, best test is to run the same thing
    > on your
    >     >> command line that Ant is trying to run.
    >     >>
    >     >>     -Alex
    >     >>
    >     >>     On 9/14/18, 9:13 AM, "Piotr Zarzycki" <
    > piotrzarzycki21@gmail.com>
    >     >> wrote:
    >     >>
    >     >>         Alex,
    >     >>
    >     >>         You understand it me wrong. I don't skip tests when I'm
    > trying to
    >     >> create
    >     >>         release candidate. This command is test command - I run it
    > just
    >     >> to check
    >     >>         what pure Maven build download for me - not connected with
    > ant at
    >     >> all.
    >     >>
    >     >>         Thanks,
    >     >>         Piotr
    >     >>
    >     >>         pt., 14 wrz 2018 o 18:09 Alex Harui
    > <aharui@adobe.com.invalid>
    >     >> napisał(a):
    >     >>
    >     >>         > Ant does not specify to use settings-template.  I never
    > specify
    >     >> that
    >     >>         > anymore when running Maven from the command-line.
    >     >>         >
    >     >>         > FWIW, I think you should not skip tests or rat when
    > trying to
    >     >> create a
    >     >>         > release candidate.
    >     >>         >
    >     >>         > Ant uses a "mvn" variable when trying to launch Maven so
    > you can
    >     >>         > -Dmvn=<some other path> although I don't think you can add
    >     >> other options to
    >     >>         > that variable.
    >     >>         >
    >     >>         > I guess I will try this out myself on Windows.
    >     >>         >
    >     >>         > HTH
    >     >>         > -Alex
    >     >>         >
    >     >>         > On 9/14/18, 9:02 AM, "Piotr Zarzycki" <
    >     >> piotrzarzycki21@gmail.com> wrote:
    >     >>         >
    >     >>         >     For the tests I run in command line following: mvn -s
    >     >>         > settings-template.xml
    >     >>         >     -DskipTests -Drat.skip=true clean install - It uses my
    >     >> Apache Maven
    >     >>         > 3.5.4.
    >     >>         >     I would be surprised that Ant run some other Maven - I
    >     >> don't have any
    >     >>         > other
    >     >>         >     installed in my system. I will check as you propose
    > from
    >     >> Ant.
    >     >>         >
    >     >>         >
    >     >>         >     pt., 14 wrz 2018 o 17:54 Alex Harui
    >     >> <aharui@adobe.com.invalid>
    >     >>         > napisał(a):
    >     >>         >
    >     >>         >     > The Ant script runs (on Windows) whatever mvn.cmd
    > maps to
    >     >> in the
    >     >>         > PATH.
    >     >>         >     > What are you typing on the command-line to run
    > Maven?
    >     >>         >     >
    >     >>         >     > There are some options for Ant that print out more
    > info
    >     >> or you might
    >     >>         > add
    >     >>         >     > some other commands to the Ant script to help
    > figure out
    >     >> what
    >     >>         > mvn.cmd it is
    >     >>         >     > running.  On Windows, I think you can run "where
    > mvn.cmd"
    >     >> to see
    >     >>         > what it is
    >     >>         >     > picking up.
    >     >>         >     >
    >     >>         >     > HTH,
    >     >>         >     > -Alex
    >     >>         >     >
    >     >>         >     >
    >     >>         >     > On 9/14/18, 8:05 AM, "Piotr Zarzycki" <
    >     >> piotrzarzycki21@gmail.com>
    >     >>         > wrote:
    >     >>         >     >
    >     >>         >     >     I have spent on that again a bunch of time and
    >     >> something is
    >     >>         > really
    >     >>         >     > weird
    >     >>         >     >     happen. I've figure out that if Maven is using
    > scm
    >     >> and we won't
    >     >>         > specify
    >     >>         >     >     inside pluginManagement tag what version of scm
    > is
    >     >> used - It will
    >     >>         >     > download
    >     >>         >     >     some older one.
    >     >>         >     >
    >     >>         >     >     However there is something wrong on the line
    > between
    >     >>         >     > releasecandidate.xml
    >     >>         >     >     and Maven.
    >     >>         >     >
    >     >>         >     >     1) If I run build of royale-compiler using cmd
    > or
    >     >> even from
    >     >>         > Intellij -
    >     >>         >     > scm
    >     >>         >     >     1.10.0 is being downloaded - correct one.
    >     >>         >     >     2) If I run release process using
    >     >> releasecandidate.xml there is
    >     >>         > being
    >     >>         >     >     downloaded 1.9.4
    >     >>         >     >
    >     >>         >     >     Any idea why it could happen like that ? This
    > file
    >     >>         >     > releasecandidate.xml is
    >     >>         >     >     used to just launch Maven build, why old scm is
    > being
    >     >>         > downloaded?!
    >     >>         >     >
    >     >>         >     >     Thanks,
    >     >>         >     >     Piotr
    >     >>         >     >
    >     >>         >     >     czw., 13 wrz 2018 o 21:43 Alex Harui
    >     >> <aharui@adobe.com.invalid>
    >     >>         >     > napisał(a):
    >     >>         >     >
    >     >>         >     >     > I think the console output will show what
    > versions
    >     >> of plugins
    >     >>         > are
    >     >>         >     >     > downloaded. You can also check out the local
    > maven
    >     >> cache.
    >     >>         >     >     >
    >     >>         >     >     > Get Outlook for Android<
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fghei36&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873623282&amp;sdata=%2BCfU%2B2Hg73Nr3bm%2FoAhf2%2B%2BbtrL9fCclN7whFIyr1B8%3D&amp;reserved=0
    >     >>         >     > >
    >     >>         >     >     >
    >     >>         >     >     > ________________________________
    >     >>         >     >     > From: Piotr Zarzycki <
    > piotrzarzycki21@gmail.com>
    >     >>         >     >     > Sent: Thursday, September 13, 2018 11:02:29 AM
    >     >>         >     >     > To: dev@royale.apache.org
    >     >>         >     >     > Subject: Re: [Discuss] Start release process
    > 0.9.3
    >     >>         >     >     >
    >     >>         >     >     > Unfortunately I don't know how to check that.
    > I can
    >     >> check only
    >     >>         >     > "Effective
    >     >>         >     >     > Pom" - Intellij is able to show me what is
    > behind
    >     >> the stage in
    >     >>         >     > specific
    >     >>         >     >     > pom. This is how it looks like for main pom in
    >     >> royale-asjs ->
    >     >>         >     >     >
    >     >>         >     >     >
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FeVmK&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873623282&amp;sdata=lU0LNypNyfW1BS0%2BtPzmr0d8haiC4AotMKQrfpMWvv8%3D&amp;reserved=0
    >     >>         >     >     >
    >     >>         >     >     > Piotr
    >     >>         >     >     >
    >     >>         >     >     >
    >     >>         >     >     >
    >     >>         >     >     > czw., 13 wrz 2018 o 19:42 Alex Harui
    >     >> <aharui@adobe.com.invalid
    >     >>         > >
    >     >>         >     >     > napisał(a):
    >     >>         >     >     >
    >     >>         >     >     > > Is maven using scm 1.10?
    >     >>         >     >     > >
    >     >>         >     >     > > Get Outlook for Android<
    >     >>         >     >     >
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fghei36&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873623282&amp;sdata=%2BCfU%2B2Hg73Nr3bm%2FoAhf2%2B%2BbtrL9fCclN7whFIyr1B8%3D&amp;reserved=0
    >     >>         >     >     > >
    >     >>         >     >     > >
    >     >>         >     >     > > ________________________________
    >     >>         >     >     > > From: Piotr Zarzycki <
    > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > Sent: Thursday, September 13, 2018 8:55:29
    > AM
    >     >>         >     >     > > To: dev@royale.apache.org
    >     >>         >     >     > > Subject: Re: [Discuss] Start release
    > process 0.9.3
    >     >>         >     >     > >
    >     >>         >     >     > > I'm unable to use releasecandidate.xml and
    >     >> prepare that
    >     >>         > release
    >     >>         >     > using
    >     >>         >     >     > that
    >     >>         >     >     > > script. It's failing constantly, despite my
    >     >> attempt of
    >     >>         > update scm.
    >     >>         >     >     > Failing
    >     >>         >     >     > > is happen only on royale-asjs.
    >     >>         >     >     > >
    >     >>         >     >     > > I see only option to prepare that release
    >     >> manually.
    >     >>         >     >     > >
    >     >>         >     >     > > Thanks,
    >     >>         >     >     > > Piotr
    >     >>         >     >     > >
    >     >>         >     >     > > czw., 13 wrz 2018 o 10:47 Alex Harui
    >     >>         > <aharui@adobe.com.invalid>
    >     >>         >     >     > > napisał(a):
    >     >>         >     >     > >
    >     >>         >     >     > > > Yes, that might work.  But you also have
    > to run
    >     >> the
    >     >>         >     > update.version
    >     >>         >     >     > target
    >     >>         >     >     > > > in Ant.  It looks like I didn't write
    > about it
    >     >> in the
    >     >>         > wiki.  I
    >     >>         >     > think
    >     >>         >     >     > the
    >     >>         >     >     > > > command would be something like:
    >     >>         >     >     > > >
    >     >>         >     >     > > >   Ant -f releasecandidate.xml
    > update.version
    >     >>         >     > -Drelease.version=0.9.3
    >     >>         >     >     > > >
    >     >>         >     >     > > > I think it will ask you for the next
    > version to
    >     >> use.  I'm
    >     >>         > done
    >     >>         >     > working
    >     >>         >     >     > > for
    >     >>         >     >     > > > today, so good luck.
    >     >>         >     >     > > >
    >     >>         >     >     > > > HTH,
    >     >>         >     >     > > > -Alex
    >     >>         >     >     > > >
    >     >>         >     >     > > > On 9/13/18, 12:52 AM, "Piotr Zarzycki" <
    >     >>         >     > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > wrote:
    >     >>         >     >     > > >
    >     >>         >     >     > > >     Alex,
    >     >>         >     >     > > >
    >     >>         >     >     > > >     By that do you mean that I basically
    > should
    >     >> go two
    >     >>         > times
    >     >>         >     > with third
    >     >>         >     >     > > > step of
    >     >>         >     >     > > >     your release steps ? It will give the
    >     >> results I think
    >     >>         > so.
    >     >>         >     >     > > >
    >     >>         >     >     > > >     [1]
    >     >>         >     >     > > >
    >     >>         >     >     > > >
    >     >>         >     >     > >
    >     >>         >     >     >
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fwiki%2FRelease-Manager-Notes%23release-steps&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873633300&amp;sdata=uns5ytN4XDOzv1Mb8U3ol%2FS49h10NXq34%2FOtRdfzgfs%3D&amp;reserved=0
    >     >>         >     >     > > >
    >     >>         >     >     > > >     Thanks,
    >     >>         >     >     > > >     Piotr
    >     >>         >     >     > > >
    >     >>         >     >     > > >     czw., 13 wrz 2018 o 09:46 Alex Harui
    >     >>         >     > <aharui@adobe.com.invalid>
    >     >>         >     >     > > > napisał(a):
    >     >>         >     >     > > >
    >     >>         >     >     > > >     > I also noticed that there are lots
    > of
    >     >> references to
    >     >>         > 0.9.3
    >     >>         >     > in the
    >     >>         >     >     > > > repo.  If
    >     >>         >     >     > > >     > we want to use 0.9.4 as the version
    >     >> number, I think
    >     >>         > you
    >     >>         >     > will have
    >     >>         >     >     > > to
    >     >>         >     >     > > > run
    >     >>         >     >     > > >     > the update.version target in
    >     >> releasecandidate.xml and
    >     >>         >     > update the
    >     >>         >     >     > > > Maven poms
    >     >>         >     >     > > >     > as well.   We've never really tried
    > to
    >     >> skip a version
    >     >>         >     > number
    >     >>         >     >     > > before,
    >     >>         >     >     > > > so not
    >     >>         >     >     > > >     > exactly sure what needs to be
    > done.  One
    >     >> way that
    >     >>         > might
    >     >>         >     > work to
    >     >>         >     >     > > > update
    >     >>         >     >     > > >     > Maven poms is to create the release
    >     >> branches.  That
    >     >>         > should
    >     >>         >     > update
    >     >>         >     >     > > the
    >     >>         >     >     > > >     > version numbers in the develop
    > branch.
    >     >> Then toss the
    >     >>         >     > release
    >     >>         >     >     > > branch
    >     >>         >     >     > > >     > without reverting and create another
    >     >> release
    >     >>         > branch.  That
    >     >>         >     > should
    >     >>         >     >     > > > update
    >     >>         >     >     > > >     > the version numbers in develop to
    >     >> 0.9.5-SNAPSHOT
    >     >>         > which is
    >     >>         >     > what we
    >     >>         >     >     > > > want, and
    >     >>         >     >     > > >     > the release branches should have
    > 0.9.4.
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     > HTH,
    >     >>         >     >     > > >     > -Alex
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     > On 9/12/18, 2:18 PM, "Alex Harui"
    >     >>         > <aharui@adobe.com.INVALID
    >     >>         >     > >
    >     >>         >     >     > > wrote:
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     >     The console output should
    > include
    >     >> what version of
    >     >>         >     > plugins are
    >     >>         >     >     > > >     > downloaded.
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     >     Get Outlook for Android<
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >
    >     >>         >     >     > >
    >     >>         >     >     >
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fghei36&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873633300&amp;sdata=9f87scY29nhZxBOLs8QigBmBad87mVwp08CxaBhMu0c%3D&amp;reserved=0
    >     >>         >     >     > > >     > >
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     >     ________________________________
    >     >>         >     >     > > >     >     From: Piotr Zarzycki <
    >     >> piotrzarzycki21@gmail.com>
    >     >>         >     >     > > >     >     Sent: Wednesday, September 12,
    > 2018
    >     >> 9:54:04 AM
    >     >>         >     >     > > >     >     To: dev@royale.apache.org
    >     >>         >     >     > > >     >     Subject: Re: [Discuss] Start
    > release
    >     >> process
    >     >>         > 0.9.3
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     >     That's not good, because I was
    >     >> updated that
    >     >>         > stuff. It
    >     >>         >     > looks
    >     >>         >     >     > > like
    >     >>         >     >     > > > it
    >     >>         >     >     > > >     > didn't
    >     >>         >     >     > > >     >     work well. Let me investigate
    > more
    >     >> scm plugin
    >     >>         > stuff
    >     >>         >     > and I'm
    >     >>         >     >     > > > reverting
    >     >>         >     >     > > >     >     current changes.
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     >     Thanks!
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     >     śr., 12 wrz 2018 o 18:39 Alex
    > Harui
    >     >>         >     > <aharui@adobe.com.invalid
    >     >>         >     >     > >
    >     >>         >     >     > > >     > napisał(a):
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >     >     > That error implies that
    > maven-scm
    >     >> 1.10.0 is not
    >     >>         >     > being used.
    >     >>         >     >     > > > Some
    >     >>         >     >     > > >     > older
    >     >>         >     >     > > >     >     > version is.  I couldn't
    > figure out
    >     >> from reading
    >     >>         >     > Maven doc
    >     >>         >     >     > > > exactly
    >     >>         >     >     > > >     > how to
    >     >>         >     >     > > >     >     > control that.  We might need
    > to
    >     >> specify it in
    >     >>         > the
    >     >>         >     > main pom,
    >     >>         >     >     > > > but I was
    >     >>         >     >     > > >     >     > hoping that if you used the
    > latest
    >     >> Maven it
    >     >>         > would
    >     >>         >     >     > > automatically
    >     >>         >     >     > > >     > bring in
    >     >>         >     >     > > >     >     > that version.
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     > Regarding canceling an RC:
    > the Ant
    >     >> scripts
    >     >>         > have
    >     >>         >     > targets
    >     >>         >     >     > that
    >     >>         >     >     > > > run
    >     >>         >     >     > > >     > other
    >     >>         >     >     > > >     >     > targets that have bunches of
    > Ant
    >     >> commands.  So
    >     >>         > when
    >     >>         >     >     > something
    >     >>         >     >     > > > fails,
    >     >>         >     >     > > >     > and
    >     >>         >     >     > > >     >     > you re-start from some Ant
    > target,
    >     >> it is
    >     >>         > expecting
    >     >>         >     > certain
    >     >>         >     >     > > > starting
    >     >>         >     >     > > >     >     > conditions.  So sometimes you
    > have
    >     >> to revert
    >     >>         > commits
    >     >>         >     > or
    >     >>         >     >     > > delete
    >     >>         >     >     > > > the
    >     >>         >     >     > > >     > branch
    >     >>         >     >     > > >     >     > and tags or sometimes you just
    >     >> delete the
    >     >>         > working
    >     >>         >     > copy.  It
    >     >>         >     >     > > > depends
    >     >>         >     >     > > >     > where
    >     >>         >     >     > > >     >     > you are starting from.  There
    > are
    >     >> some Ant
    >     >>         > tasks
    >     >>         >     > that start
    >     >>         >     >     > > at
    >     >>         >     >     > > >     > certain
    >     >>         >     >     > > >     >     > points (like after
    > royale-compiler
    >     >> and
    >     >>         >     > royale-typedefs have
    >     >>         >     >     > > > been
    >     >>         >     >     > > >     > completed)
    >     >>         >     >     > > >     >     > but it isn't so fine grain
    > that you
    >     >> can start
    >     >>         >     > exactly from
    >     >>         >     >     > > the
    >     >>         >     >     > > > point
    >     >>         >     >     > > >     > of
    >     >>         >     >     > > >     >     > failure.
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     > HTH,
    >     >>         >     >     > > >     >     > -Alex
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     > On 9/12/18, 8:46 AM, "Piotr
    >     >> Zarzycki" <
    >     >>         >     >     > > > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > >     > wrote:
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     >     I got fail on royale-asjs
    > repo
    >     >> ->
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >
    >     >>         >     >     > >
    >     >>         >     >     >
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2FBzVx&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873633300&amp;sdata=fD1%2Fqew4nUN%2Fp3%2BG710CCW8HMgpGpJCQmNG7noF9d4w%3D&amp;reserved=0
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     >     I don't understand one
    > thing
    >     >> from the
    >     >>         >     > instruction.
    >     >>         >     >     > Since
    >     >>         >     >     > > >     > something
    >     >>         >     >     > > >     >     > failed
    >     >>         >     >     > > >     >     >     during branch creation I
    > need
    >     >> to revert
    >     >>         > changes.
    >     >>         >     >     > Probably
    >     >>         >     >     > > > remove
    >     >>         >     >     > > >     >     > branches
    >     >>         >     >     > > >     >     >     and revert everything in
    >     >> develop. - Yes ?
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     >     Instruction is saying in
    >     >> Canceling RC: "To
    >     >>         >     > cancel an RC
    >     >>         >     >     > > and
    >     >>         >     >     > > >     > generate a
    >     >>         >     >     > > >     >     > new
    >     >>         >     >     > > >     >     >     RC, you have to revert
    > certain
    >     >> changes that
    >     >>         >     > Maven made
    >     >>         >     >     > to
    >     >>         >     >     > > > the
    >     >>         >     >     > > >     > release
    >     >>         >     >     > > >     >     >     branch." - Why only
    > release
    >     >> branch ?
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     >     Should I not remove
    > release
    >     >> branch ?
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     >     Thanks,
    >     >>         >     >     > > >     >     >     Piotr
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     >     śr., 12 wrz 2018 o 17:38
    > Piotr
    >     >> Zarzycki <
    >     >>         >     >     > > >     > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > >     >     >     napisał(a):
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >     >     > I just tried it from
    > Git Bash
    >     >> and
    >     >>         > something
    >     >>         >     > started
    >     >>         >     >     > to
    >     >>         >     >     > > > work :)
    >     >>         >     >     > > >     >     >     >
    >     >>         >     >     > > >     >     >     > śr., 12 wrz 2018 o 17:36
    >     >> Piotr Zarzycki <
    >     >>         >     >     > > >     > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > >     >     >     > napisał(a):
    >     >>         >     >     > > >     >     >     >
    >     >>         >     >     > > >     >     >     >> I just go through SSH
    >     >> instruction again
    >     >>         > and
    >     >>         >     > re-added
    >     >>         >     >     > > > rsa key
    >     >>         >     >     > > >     > to
    >     >>         >     >     > > >     >     > GitHub,
    >     >>         >     >     > > >     >     >     >> but no luck so far.
    >     >>         >     >     > > >     >     >     >>
    >     >>         >     >     > > >     >     >     >> śr., 12 wrz 2018 o
    > 17:36
    >     >> Piotr Zarzycki
    >     >>         > <
    >     >>         >     >     > > >     > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > >     >     >     >> napisał(a):
    >     >>         >     >     > > >     >     >     >>
    >     >>         >     >     > > >     >     >     >>> Yes - I have exactly
    > two
    >     >> files there -
    >     >>         > the
    >     >>         >     > same as
    >     >>         >     >     > > you.
    >     >>         >     >     > > >     >     >     >>>
    >     >>         >     >     > > >     >     >     >>> śr., 12 wrz 2018 o
    > 17:34
    >     >> Alex Harui
    >     >>         >     >     > > > <aharui@adobe.com.invalid
    >     >>         >     >     > > >     > >
    >     >>         >     >     > > >     >     >     >>> napisał(a):
    >     >>         >     >     > > >     >     >     >>>
    >     >>         >     >     > > >     >     >     >>>> Are you running
    >     >> releasecandidate.xml
    >     >>         > from an
    >     >>         >     >     > 'empty
    >     >>         >     >     > > > folder
    >     >>         >     >     > > >     > and
    >     >>         >     >     > > >     >     > not in
    >     >>         >     >     > > >     >     >     >>>> your working copy?  I
    >     >> think the only
    >     >>         > thing
    >     >>         >     > I have
    >     >>         >     >     > in
    >     >>         >     >     > > > the
    >     >>         >     >     > > >     > folder is
    >     >>         >     >     > > >     >     >     >>>> releasecandidate.xml
    > and
    >     >>         > local.properties.
    >     >>         >     >     > > >     >     >     >>>>
    >     >>         >     >     > > >     >     >     >>>> Get Outlook for
    > Android<
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >
    >     >>         >     >     > >
    >     >>         >     >     >
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2Fghei36&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873633300&amp;sdata=9f87scY29nhZxBOLs8QigBmBad87mVwp08CxaBhMu0c%3D&amp;reserved=0
    >     >>         >     >     > > >     >     > >
    >     >>         >     >     > > >     >     >     >>>>
    >     >>         >     >     > > >     >     >     >>>>
    >     >> ________________________________
    >     >>         >     >     > > >     >     >     >>>> From: Piotr Zarzycki
    > <
    >     >>         >     > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > >     >     >     >>>> Sent: Wednesday,
    > September
    >     >> 12, 2018
    >     >>         > 7:42:06
    >     >>         >     > AM
    >     >>         >     >     > > >     >     >     >>>> To:
    > dev@royale.apache.org
    >     >>         >     >     > > >     >     >     >>>> Subject: Re:
    > [Discuss]
    >     >> Start release
    >     >>         >     > process 0.9.3
    >     >>         >     >     > > >     >     >     >>>>
    >     >>         >     >     > > >     >     >     >>>> Yes I follow the SSH
    > link.
    >     >> I will
    >     >>         > review
    >     >>         >     > stuff
    >     >>         >     >     > > again.
    >     >>         >     >     > > >     >     >     >>>>
    >     >>         >     >     > > >     >     >     >>>>
    >     >>         >     >     > > >     >     >     >>>> On Wed, Sep 12,
    > 2018, 4:06
    >     >> PM Alex
    >     >>         > Harui
    >     >>         >     >     > > >     > <aharui@adobe.com.invalid
    >     >>         >     >     > > >     >     > >
    >     >>         >     >     > > >     >     >     >>>> wrote:
    >     >>         >     >     > > >     >     >     >>>>
    >     >>         >     >     > > >     >     >     >>>> > Did you follow the
    > SSH
    >     >> link from
    >     >>         > here?
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>>
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >
    >     >>         >     >     > >
    >     >>         >     >     >
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fapache%2Froyale-asjs%2Fwiki%2FRelease-Manager-Notes&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873633300&amp;sdata=pftethr4DtNtXG7fN0tFXKP52Vdk%2BPaC2RPF8QJh4bw%3D&amp;reserved=0
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> > HTH,
    >     >>         >     >     > > >     >     >     >>>> > -Alex
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> > On 9/12/18, 4:55
    > AM,
    >     >> "Piotr
    >     >>         > Zarzycki" <
    >     >>         >     >     > > >     >     > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > >     >     >     >>>> wrote:
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     I got first
    > fail
    >     >> using
    >     >>         >     > releasecandidate.xml
    >     >>         >     >     > > > script
    >     >>         >     >     > > >     > [1]. It
    >     >>         >     >     > > >     >     > is fail
    >     >>         >     >     > > >     >     >     >>>> > during
    >     >>         >     >     > > >     >     >     >>>> >     git push, so I
    >     >> thought that I
    >     >>         > will
    >     >>         >     > try to
    >     >>         >     >     > run
    >     >>         >     >     > > > that
    >     >>         >     >     > > >     > command
    >     >>         >     >     > > >     >     > which
    >     >>         >     >     > > >     >     >     >>>> seems
    >     >>         >     >     > > >     >     >     >>>> > to
    >     >>         >     >     > > >     >     >     >>>> >     be cause of the
    >     >> problem
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     git push
    >     >> git@github.com:
    >     >>         >     >     > > > apache/royale-compiler.git
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >  refs/heads/develop:refs/heads/develop
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     but with fetch
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     git fetch "
    >     >> git@github.com:
    >     >>         >     >     > > > apache/royale-compiler.git"
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >  refs/heads/develop:refs/heads/develop
    >     >>         >     >     > > >     >     >     >>>> >     Enter
    > passphrase for
    >     >> key
    >     >>         >     >     > > > '/c/Users/piotr/.ssh/id_rsa':
    >     >>         >     >     > > >     >     >     >>>> >     fatal:
    > Refusing to
    >     >> fetch into
    >     >>         > current
    >     >>         >     > branch
    >     >>         >     >     > > >     >     > refs/heads/develop of
    >     >>         >     >     > > >     >     >     >>>> > non-bare
    >     >>         >     >     > > >     >     >     >>>> >     repository
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     Anyone have
    > problems
    >     >> like that
    >     >>         > during
    >     >>         >     >     > release
    >     >>         >     >     > > > process
    >     >>         >     >     > > >     > ? I
    >     >>         >     >     > > >     >     > do have
    >     >>         >     >     > > >     >     >     >>>> SSH
    >     >>         >     >     > > >     >     >     >>>> > keys
    >     >>         >     >     > > >     >     >     >>>> >     added to my
    > manager
    >     >> and GitHub
    >     >>         >     > account.
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     [1]
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>>
    >     >>         >     >     > > >     >     >
    >     >>         >     >     > > >     >
    >     >>         >     >     > > >
    >     >>         >     >     > >
    >     >>         >     >     >
    >     >>         >     >
    >     >>         >
    >     >>
    > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpaste.apache.org%2Fuyba&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873633300&amp;sdata=RT4opYIHjtSy6V3Erau19v2ICJ3%2FVE1YFxo7IamvV8E%3D&amp;reserved=0
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     Thanks,
    >     >>         >     >     > > >     >     >     >>>> >     Piotr
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     śr., 12 wrz
    > 2018 o
    >     >> 11:36 Piotr
    >     >>         >     > Zarzycki <
    >     >>         >     >     > > >     >     >     >>>>
    > piotrzarzycki21@gmail.com>
    >     >>         >     >     > > >     >     >     >>>> >     napisał(a):
    >     >>         >     >     > > >     >     >     >>>> >
    >     >>         >     >     > > >     >     >     >>>> >     > Hi Harbs,
    >     >>         >     >     > > >     >     >     >>>> >     >
    >     >>         >     >     > > >     >     >     >>>> >     > What's your
    >     >> progress on
    >     >>         > fixing that
    >     >>         >     > or
    >     >>         >     >     > > > eventually
    >     >>         >     >     > > >     > moving
    >     >>         >     >     > > >     >     > to
    >     >>         >     >     > > >     >     >     >>>> branch ?
    >     >>         >     >     > > >     >     >     >>>> > Can I
    >     >>         >     >     > > >     >     >     >>>> >     > proceed with
    > stuff
    >     >> ?
    >     >>         >     >     > > >     >     >     >>>> >     >
    >     >>         >     >     > > >     >     >     >>>> >     > Thanks,
    >     >>         >     >     > > >     >     >     >>>> >     > Piotr
    >     >>         >     >     > > >     >     >     >>>> >     >
    >     >>         >     >     > > >     >     >     >>>> >     > śr., 12 wrz
    > 2018 o
    >
    
    
    
    -- 
    
    Piotr Zarzycki
    
    Patreon: *https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.patreon.com%2Fpiotrzarzycki&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873633300&amp;sdata=RSXRNRvAxYhWRheheRwtu%2FS%2FDEf4Lo6sPyOzlDBBF0A%3D&amp;reserved=0
    <https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.patreon.com%2Fpiotrzarzycki&amp;data=02%7C01%7Caharui%40adobe.com%7Cb4f3681be8ee401a9edb08d61c7cd8a8%7Cfa7b1b5a7b34438794aed2c178decee1%7C0%7C0%7C636727719873633300&amp;sdata=RSXRNRvAxYhWRheheRwtu%2FS%2FDEf4Lo6sPyOzlDBBF0A%3D&amp;reserved=0>*
    

Mime
View raw message