quickstep-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From zu...@apache.org
Subject [16/52] [partial] incubator-quickstep git commit: Make the third party directory leaner.
Date Sun, 29 Jan 2017 02:07:50 GMT
http://git-wip-us.apache.org/repos/asf/incubator-quickstep/blob/9661f956/third_party/gperftools/libtool
----------------------------------------------------------------------
diff --git a/third_party/gperftools/libtool b/third_party/gperftools/libtool
deleted file mode 100755
index 7834200..0000000
--- a/third_party/gperftools/libtool
+++ /dev/null
@@ -1,10246 +0,0 @@
-#! /bin/sh
-
-# libtool - Provide generalized library-building support services.
-# Generated automatically by config.status (gperftools) 2.4
-# Libtool was configured on host chi:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-
-# The names of the tagged configurations supported by this script.
-available_tags="CXX "
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Which release of libtool.m4 was used?
-macro_version=2.4.2
-macro_revision=1.3337
-
-# Whether or not to build shared libraries.
-build_libtool_libs=yes
-
-# Whether or not to build static libraries.
-build_old_libs=yes
-
-# What type of objects to build.
-pic_mode=default
-
-# Whether or not to optimize for fast installation.
-fast_install=yes
-
-# Shell to use when invoking shell scripts.
-SHELL="/bin/sh"
-
-# An echo program that protects backslashes.
-ECHO="printf %s\\n"
-
-# The PATH separator for the build system.
-PATH_SEPARATOR=":"
-
-# The host system.
-host_alias=
-host=x86_64-unknown-linux-gnu
-host_os=linux-gnu
-
-# The build system.
-build_alias=
-build=x86_64-unknown-linux-gnu
-build_os=linux-gnu
-
-# A sed program that does not truncate output.
-SED="/bin/sed"
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# A grep program that handles long lines.
-GREP="/bin/grep"
-
-# An ERE matcher.
-EGREP="/bin/grep -E"
-
-# A literal string matcher.
-FGREP="/bin/grep -F"
-
-# A BSD- or MS-compatible name lister.
-NM="/usr/bin/nm -B"
-
-# Whether we need soft or hard links.
-LN_S="ln -s"
-
-# What is the maximum length of a command?
-max_cmd_len=1572864
-
-# Object file suffix (normally "o").
-objext=o
-
-# Executable file suffix (normally "").
-exeext=
-
-# whether the shell understands "unset".
-lt_unset=unset
-
-# turn spaces into newlines.
-SP2NL="tr \\040 \\012"
-
-# turn newlines into spaces.
-NL2SP="tr \\015\\012 \\040\\040"
-
-# convert $build file names to $host format.
-to_host_file_cmd=func_convert_file_noop
-
-# convert $build files to toolchain format.
-to_tool_file_cmd=func_convert_file_noop
-
-# An object symbol dumper.
-OBJDUMP="objdump"
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method="pass_all"
-
-# Command to use when deplibs_check_method = "file_magic".
-file_magic_cmd="\$MAGIC_CMD"
-
-# How to find potential files when deplibs_check_method = "file_magic".
-file_magic_glob=""
-
-# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
-want_nocaseglob="no"
-
-# DLL creation program.
-DLLTOOL="false"
-
-# Command to associate shared and link libraries.
-sharedlib_from_linklib_cmd="printf %s\\n"
-
-# The archiver.
-AR="ar"
-
-# Flags to create an archive.
-AR_FLAGS="cru"
-
-# How to feed a file listing to the archiver.
-archiver_list_spec="@"
-
-# A symbol stripping program.
-STRIP="strip"
-
-# Commands used to install an old-style archive.
-RANLIB="ranlib"
-old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$tool_oldlib"
-old_postuninstall_cmds=""
-
-# Whether to use a lock for old archive extraction.
-lock_old_archive_extraction=no
-
-# A C compiler.
-LTCC="gcc"
-
-# LTCC compiler flags.
-LTCFLAGS="-g -O2"
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="sed -n -e 's/^.*[	 ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[	 ][	 ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p' | sed '/ __gnu_lto/d'"
-
-# Transform the output of nm in a proper C declaration.
-global_symbol_to_cdecl="sed -n -e 's/^T .* \\(.*\\)\$/extern int \\1();/p' -e 's/^[ABCDGIRSTW]* .* \\(.*\\)\$/extern char \\1;/p'"
-
-# Transform the output of nm in a C name address pair.
-global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\)[ ]*\$/  {\\\"\\1\\\", (void *) 0},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (void *) \\&\\2},/p'"
-
-# Transform the output of nm in a C name address pair when lib prefix is needed.
-global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \\([^ ]*\\)[ ]*\$/  {\\\"\\1\\\", (void *) 0},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\(lib[^ ]*\\)\$/  {\"\\2\", (void *) \\&\\2},/p' -e 's/^[ABCDGIRSTW]* \\([^ ]*\\) \\([^ ]*\\)\$/  {\"lib\\2\", (void *) \\&\\2},/p'"
-
-# Specify filename containing input files for $NM.
-nm_file_list_spec="@"
-
-# The root where to search for dependent libraries,and in which our libraries should be installed.
-lt_sysroot=
-
-# The name of the directory that contains temporary libtool files.
-objdir=.libs
-
-# Used to examine libraries when file_magic_cmd begins with "file".
-MAGIC_CMD=file
-
-# Must we lock files when doing compilation?
-need_locks="no"
-
-# Manifest tool.
-MANIFEST_TOOL=":"
-
-# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
-DSYMUTIL=""
-
-# Tool to change global to local symbols on Mac OS X.
-NMEDIT=""
-
-# Tool to manipulate fat objects and archives on Mac OS X.
-LIPO=""
-
-# ldd/readelf like tool for Mach-O binaries on Mac OS X.
-OTOOL=""
-
-# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
-OTOOL64=""
-
-# Old archive suffix (normally "a").
-libext=a
-
-# Shared library suffix (normally ".so").
-shrext_cmds=".so"
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=""
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at link time.
-variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-
-# Do we need the "lib" prefix for modules?
-need_lib_prefix=no
-
-# Do we need a version for libraries?
-need_version=no
-
-# Library versioning type.
-version_type=linux
-
-# Shared library runtime path variable.
-runpath_var=LD_RUN_PATH
-
-# Shared library path variable.
-shlibpath_var=LD_LIBRARY_PATH
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=no
-
-# Format of library name prefix.
-libname_spec="lib\$name"
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME
-library_names_spec="\${libname}\${release}\${shared_ext}\$versuffix \${libname}\${release}\${shared_ext}\$major \$libname\${shared_ext}"
-
-# The coded name of the library, if different from the real name.
-soname_spec="\${libname}\${release}\${shared_ext}\$major"
-
-# Permission mode override for installation of shared libraries.
-install_override_mode=""
-
-# Command to use after installation of a shared archive.
-postinstall_cmds=""
-
-# Command to use after uninstallation of a shared archive.
-postuninstall_cmds=""
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
-
-# As "finish_cmds", except a single script fragment to be evaled but
-# not shown.
-finish_eval=""
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=yes
-
-# Compile-time system search path for libraries.
-sys_lib_search_path_spec="/usr/lib/gcc/x86_64-linux-gnu/4.9 /usr/lib/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib "
-
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/lib/x86_64-linux-gnu/libfakeroot /lib/i386-linux-gnu /usr/lib/i386-linux-gnu /lib/i586-linux-gnu /usr/lib/i586-linux-gnu /usr/local/lib /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu /lib32 /usr/lib32 /libx32 /usr/libx32 "
-
-# Whether dlopen is supported.
-dlopen_support=unknown
-
-# Whether dlopen of programs is supported.
-dlopen_self=unknown
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=unknown
-
-# Commands to strip libraries.
-old_striplib="strip --strip-debug"
-striplib="strip --strip-unneeded"
-
-
-# The linker used to build libraries.
-LD="/usr/bin/ld -m elf_x86_64"
-
-# How to create reloadable object files.
-reload_flag=" -r"
-reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
-
-# Commands used to build an old-style archive.
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$tool_oldlib"
-
-# A language specific compiler.
-CC="gcc"
-
-# Is the compiler the GNU compiler?
-with_gcc=yes
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=" -fno-builtin"
-
-# Additional compiler flags for building library objects.
-pic_flag=" -fPIC -DPIC"
-
-# How to pass a linker flag through the compiler.
-wl="-Wl,"
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="-static"
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o="yes"
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=no
-
-# Whether or not to disallow shared libs when runtime libs are static.
-allow_libtool_libs_with_static_runtimes=no
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="\${wl}--export-dynamic"
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
-
-# Whether the compiler copes with passing no objects directly.
-compiler_needs_object="no"
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=""
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=""
-
-# Commands used to build a shared archive.
-archive_cmds="\$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
-archive_expsym_cmds="echo \\\"{ global:\\\" > \$output_objdir/\$libname.ver~
-	    cat \$export_symbols | sed -e \\\"s/\\\\(.*\\\\)/\\\\1;/\\\" >> \$output_objdir/\$libname.ver~
-	    echo \\\"local: *; };\\\" >> \$output_objdir/\$libname.ver~
-	    \$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-version-script \${wl}\$output_objdir/\$libname.ver -o \$lib"
-
-# Commands used to build a loadable module if different from building
-# a shared archive.
-module_cmds=""
-module_expsym_cmds=""
-
-# Whether we are building with GNU ld or not.
-with_gnu_ld="yes"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=""
-
-# Flag that enforces no undefined symbols.
-no_undefined_flag=""
-
-# Flag to hardcode $libdir into a binary during linking.
-# This must work even if $libdir does not exist
-hardcode_libdir_flag_spec="\${wl}-rpath \${wl}\$libdir"
-
-# Whether we need a single "-rpath" flag with a separated argument.
-hardcode_libdir_separator=""
-
-# Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-# DIR into the resulting binary.
-hardcode_direct=no
-
-# Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting ${shlibpath_var} if the
-# library is relocated.
-hardcode_direct_absolute=no
-
-# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-# into the resulting binary.
-hardcode_minus_L=no
-
-# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-# into the resulting binary.
-hardcode_shlibpath_var=unsupported
-
-# Set to "yes" if building a shared library automatically hardcodes DIR
-# into the library and all subsequent libraries and executables linked
-# against it.
-hardcode_automatic=no
-
-# Set to yes if linker adds runtime paths of dependent libraries
-# to runtime path list.
-inherit_rpath=no
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=no
-
-# Set to "yes" if exported symbols are required.
-always_export_symbols=no
-
-# The commands to list exported symbols.
-export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | \$SED 's/.* //' | sort | uniq > \$export_symbols"
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
-
-# Symbols that must always be exported.
-include_expsyms=""
-
-# Commands necessary for linking programs (against libraries) with templates.
-prelink_cmds=""
-
-# Commands necessary for finishing linking programs.
-postlink_cmds=""
-
-# Specify filename containing input files.
-file_list_spec=""
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=immediate
-
-# The directories searched by this compiler when creating a shared library.
-compiler_lib_search_dirs=""
-
-# Dependencies to place before and after the objects being linked to
-# create a shared library.
-predep_objects=""
-postdep_objects=""
-predeps=""
-postdeps=""
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=""
-
-# ### END LIBTOOL CONFIG
-
-
-# libtool (GNU libtool) 2.4.2
-# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions.  There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# GNU Libtool is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --no-warn            don't display warning messages
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-#         host-triplet:	$host
-#         shell:		$SHELL
-#         compiler:		$LTCC
-#         compiler flags:		$LTCFLAGS
-#         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.11
-#         automake:	$automake_version
-#         autoconf:	$autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
-
-PROGRAM=libtool
-PACKAGE=libtool
-VERSION="2.4.2 Debian-2.4.2-1.11"
-TIMESTAMP=""
-package_revision=1.3337
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
-  eval "if test \"\${$lt_var+set}\" = set; then
-          save_$lt_var=\$$lt_var
-          $lt_var=C
-	  export $lt_var
-	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
-	fi"
-done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-
-$lt_unset CDPATH
-
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-
-
-: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac
-} # Extended-shell func_dirname implementation
-
-
-# func_basename file
-func_basename ()
-{
-    func_basename_result="${1##*/}"
-} # Extended-shell func_basename implementation
-
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac
-    func_basename_result="${1##*/}"
-} # Extended-shell func_dirname_and_basename implementation
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-    # positional parameters, so assign one to ordinary parameter first.
-    func_stripname_result=${3}
-    func_stripname_result=${func_stripname_result#"${1}"}
-    func_stripname_result=${func_stripname_result%"${2}"}
-} # Extended-shell func_stripname implementation
-
-
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-		s@/\./@/@g
-		t dotsl
-		s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
-
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
-
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
-
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-
-# Make sure we have an absolute path for reexecution:
-case $progpath in
-  [\\/]*|[A-Za-z]:\\*) ;;
-  *[\\/]*)
-     progdir=$func_dirname_result
-     progdir=`cd "$progdir" && pwd`
-     progpath="$progdir/$progname"
-     ;;
-  *)
-     save_IFS="$IFS"
-     IFS=${PATH_SEPARATOR-:}
-     for progdir in $PATH; do
-       IFS="$save_IFS"
-       test -x "$progdir/$progname" && break
-     done
-     IFS="$save_IFS"
-     test -n "$progdir" || progdir=`pwd`
-     progpath="$progdir/$progname"
-     ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
-  s/$bs4/&\\
-/g
-  s/^$bs2$dollar/$bs&/
-  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
-  s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
-    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
-
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
-    $opt_verbose && func_echo ${1+"$@"}
-
-    # A bug in bash halts the script if the last line of a function
-    # fails when set -e is in force, so we need another command to
-    # work around that:
-    :
-}
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*"
-}
-
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
-    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
-
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
-    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
-
-    # bash bug again:
-    :
-}
-
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
-}
-
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
-    func_error ${1+"$@"}
-    func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information."  ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
-    $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
-    my_directory_path="$1"
-    my_dir_list=
-
-    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
-      # Protect directory names starting with `-'
-      case $my_directory_path in
-        -*) my_directory_path="./$my_directory_path" ;;
-      esac
-
-      # While some portion of DIR does not yet exist...
-      while test ! -d "$my_directory_path"; do
-        # ...make a list in topmost first order.  Use a colon delimited
-	# list incase some portion of path contains whitespace.
-        my_dir_list="$my_directory_path:$my_dir_list"
-
-        # If the last portion added has no slash in it, the list is done
-        case $my_directory_path in */*) ;; *) break ;; esac
-
-        # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
-      done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
-
-      save_mkdir_p_IFS="$IFS"; IFS=':'
-      for my_dir in $my_dir_list; do
-	IFS="$save_mkdir_p_IFS"
-        # mkdir can fail with a `File exist' error if two processes
-        # try to create one of the directories concurrently.  Don't
-        # stop in that case!
-        $MKDIR "$my_dir" 2>/dev/null || :
-      done
-      IFS="$save_mkdir_p_IFS"
-
-      # Bail out if we (or some other process) failed to create a directory.
-      test -d "$my_directory_path" || \
-        func_fatal_error "Failed to create \`$1'"
-    fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
-
-    if test "$opt_dry_run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
-
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
-      if test ! -d "$my_tmpdir"; then
-        # Failing that, at least try and use $RANDOM to avoid a race
-        my_tmpdir="${my_template}-${RANDOM-0}$$"
-
-        save_mktempdir_umask=`umask`
-        umask 0077
-        $MKDIR "$my_tmpdir"
-        umask $save_mktempdir_umask
-      fi
-
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || \
-        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
-    fi
-
-    $ECHO "$my_tmpdir"
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
-{
-    case $1 in
-      *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
-      *)
-        func_quote_for_eval_unquoted_result="$1" ;;
-    esac
-
-    case $func_quote_for_eval_unquoted_result in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting, command substitution and and variable
-      # expansion for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
-        ;;
-      *)
-        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
-    esac
-}
-
-
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
-{
-    case $1 in
-      *[\\\`\"]*)
-	my_arg=`$ECHO "$1" | $SED \
-	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
-      *)
-        my_arg="$1" ;;
-    esac
-
-    case $my_arg in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting and command substitution for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        my_arg="\"$my_arg\""
-        ;;
-    esac
-
-    func_quote_for_expand_result="$my_arg"
-}
-
-
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$my_cmd"
-      my_status=$?
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.  Use the saved locale for evaluation.
-func_show_eval_locale ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$lt_user_locale
-	    $my_cmd"
-      my_status=$?
-      eval "$lt_safe_locale"
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result.  All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
-  case $1 in
-  [0-9]* | *[!a-zA-Z0-9_]*)
-    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
-    ;;
-  * )
-    func_tr_sh_result=$1
-    ;;
-  esac
-}
-
-
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
-    $opt_debug
-
-    $SED -n '/(C)/!b go
-	:more
-	/\./!{
-	  N
-	  s/\n# / /
-	  b more
-	}
-	:go
-	/^# '$PROGRAM' (GNU /,/# warranty; / {
-        s/^# //
-	s/^# *$//
-        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-        p
-     }' < "$progpath"
-     exit $?
-}
-
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
-{
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
-        s/^# //
-	s/^# *$//
-	s/\$progname/'$progname'/
-	p
-    }' < "$progpath"
-    echo
-    $ECHO "run \`$progname --help | more' for full usage"
-    exit $?
-}
-
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
-func_help ()
-{
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/# Report bugs to/ {
-	:print
-        s/^# //
-	s/^# *$//
-	s*\$progname*'$progname'*
-	s*\$host*'"$host"'*
-	s*\$SHELL*'"$SHELL"'*
-	s*\$LTCC*'"$LTCC"'*
-	s*\$LTCFLAGS*'"$LTCFLAGS"'*
-	s*\$LD*'"$LD"'*
-	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
-	p
-	d
-     }
-     /^# .* home page:/b print
-     /^# General help using/b print
-     ' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
-}
-
-# func_missing_arg argname
-# Echo program name prefixed message to standard error and set global
-# exit_cmd.
-func_missing_arg ()
-{
-    $opt_debug
-
-    func_error "missing argument for $1."
-    exit_cmd=exit
-}
-
-
-# func_split_short_opt shortopt
-# Set func_split_short_opt_name and func_split_short_opt_arg shell
-# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
-{
-    func_split_short_opt_arg=${1#??}
-    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
-} # Extended-shell func_split_short_opt implementation
-
-
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
-{
-    func_split_long_opt_name=${1%%=*}
-    func_split_long_opt_arg=${1#*=}
-} # Extended-shell func_split_long_opt implementation
-
-exit_cmd=:
-
-
-
-
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-    eval "${1}+=\${2}"
-} # Extended-shell func_append implementation
-
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
-    func_quote_for_eval "${2}"
-    eval "${1}+=\\ \$func_quote_for_eval_result"
-} # Extended-shell func_append_quoted implementation
-
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-    func_arith_result=$(( $* ))
-} # Extended-shell func_arith implementation
-
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-    func_len_result=${#1}
-} # Extended-shell func_len implementation
-
-
-# func_lo2o object
-func_lo2o ()
-{
-    case ${1} in
-      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-      *)    func_lo2o_result=${1} ;;
-    esac
-} # Extended-shell func_lo2o implementation
-
-
-# func_xform libobj-or-source
-func_xform ()
-{
-    func_xform_result=${1%.*}.lo
-} # Extended-shell func_xform implementation
-
-
-# func_fatal_configuration arg...
-# Echo program name prefixed message to standard error, followed by
-# a configuration failure hint, and exit.
-func_fatal_configuration ()
-{
-    func_error ${1+"$@"}
-    func_error "See the $PACKAGE documentation for more information."
-    func_fatal_error "Fatal configuration error."
-}
-
-
-# func_config
-# Display the configuration for all the tags in this script.
-func_config ()
-{
-    re_begincf='^# ### BEGIN LIBTOOL'
-    re_endcf='^# ### END LIBTOOL'
-
-    # Default configuration.
-    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
-    done
-
-    exit $?
-}
-
-# func_features
-# Display the features supported by this script.
-func_features ()
-{
-    echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
-    else
-      echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
-    else
-      echo "disable static libraries"
-    fi
-
-    exit $?
-}
-
-# func_enable_tag tagname
-# Verify that TAGNAME is valid, and either flag an error and exit, or
-# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
-# variable here.
-func_enable_tag ()
-{
-  # Global variable:
-  tagname="$1"
-
-  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-  sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
-  # Validate tagname.
-  case $tagname in
-    *[!-_A-Za-z0-9,/]*)
-      func_fatal_error "invalid tag name: $tagname"
-      ;;
-  esac
-
-  # Don't test for the "default" C tag, as we know it's
-  # there but not specially marked.
-  case $tagname in
-    CC) ;;
-    *)
-      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-	taglist="$taglist $tagname"
-
-	# Evaluate the configuration.  Be careful to quote the path
-	# and the sed script, to avoid splitting on whitespace, but
-	# also don't use non-portable quotes within backquotes within
-	# quotes we have to do it in 2 steps:
-	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-	eval "$extractedcf"
-      else
-	func_error "ignoring unknown tag $tagname"
-      fi
-      ;;
-  esac
-}
-
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      else
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
-    fi
-
-    exit $EXIT_MISMATCH
-  fi
-}
-
-
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
-  shift; set dummy --mode clean ${1+"$@"}; shift
-  ;;
-compile|compil|compi|comp|com|co|c)
-  shift; set dummy --mode compile ${1+"$@"}; shift
-  ;;
-execute|execut|execu|exec|exe|ex|e)
-  shift; set dummy --mode execute ${1+"$@"}; shift
-  ;;
-finish|finis|fini|fin|fi|f)
-  shift; set dummy --mode finish ${1+"$@"}; shift
-  ;;
-install|instal|insta|inst|ins|in|i)
-  shift; set dummy --mode install ${1+"$@"}; shift
-  ;;
-link|lin|li|l)
-  shift; set dummy --mode link ${1+"$@"}; shift
-  ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-  shift; set dummy --mode uninstall ${1+"$@"}; shift
-  ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
-
-
-# Parse options once, thoroughly.  This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
-  # this just eases exit handling
-  while test $# -gt 0; do
-    opt="$1"
-    shift
-    case $opt in
-      --debug|-x)	opt_debug='set -x'
-			func_echo "enabling shell trace mode"
-			$opt_debug
-			;;
-      --dry-run|--dryrun|-n)
-			opt_dry_run=:
-			;;
-      --config)
-			opt_config=:
-func_config
-			;;
-      --dlopen|-dlopen)
-			optarg="$1"
-			opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
-			shift
-			;;
-      --preserve-dup-deps)
-			opt_preserve_dup_deps=:
-			;;
-      --features)
-			opt_features=:
-func_features
-			;;
-      --finish)
-			opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
-			;;
-      --help)
-			opt_help=:
-			;;
-      --help-all)
-			opt_help_all=:
-opt_help=': help-all'
-			;;
-      --mode)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_mode="$optarg"
-case $optarg in
-  # Valid mode arguments:
-  clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
-  # Catch anything else as an error
-  *) func_error "invalid argument for $opt"
-     exit_cmd=exit
-     break
-     ;;
-esac
-			shift
-			;;
-      --no-silent|--no-quiet)
-			opt_silent=false
-preserve_args+=" $opt"
-			;;
-      --no-warning|--no-warn)
-			opt_warning=false
-preserve_args+=" $opt"
-			;;
-      --no-verbose)
-			opt_verbose=false
-preserve_args+=" $opt"
-			;;
-      --silent|--quiet)
-			opt_silent=:
-preserve_args+=" $opt"
-        opt_verbose=false
-			;;
-      --verbose|-v)
-			opt_verbose=:
-preserve_args+=" $opt"
-opt_silent=false
-			;;
-      --tag)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_tag="$optarg"
-preserve_args+=" $opt $optarg"
-func_enable_tag "$optarg"
-			shift
-			;;
-
-      -\?|-h)		func_usage				;;
-      --help)		func_help				;;
-      --version)	func_version				;;
-
-      # Separate optargs to long options:
-      --*=*)
-			func_split_long_opt "$opt"
-			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      # Separate non-argument short options:
-      -\?*|-h*|-n*|-v*)
-			func_split_short_opt "$opt"
-			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      --)		break					;;
-      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
-      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
-    esac
-  done
-
-  # Validate options:
-
-  # save first non-option argument
-  if test "$#" -gt 0; then
-    nonopt="$opt"
-    shift
-  fi
-
-  # preserve --debug
-  test "$opt_debug" = : || preserve_args+=" --debug"
-
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
-      ;;
-  esac
-
-  $opt_help || {
-    # Sanity checks first:
-    func_check_version_match
-
-    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-      func_fatal_configuration "not configured to build any kind of library"
-    fi
-
-    # Darwin sucks
-    eval std_shrext=\"$shrext_cmds\"
-
-    # Only execute mode is allowed to have -dlopen flags.
-    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-      func_error "unrecognized option \`-dlopen'"
-      $ECHO "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Change the help message to a mode-specific one.
-    generic_help="$help"
-    help="Try \`$progname --help --mode=$opt_mode' for more information."
-  }
-
-
-  # Bail if the options were screwed
-  $exit_cmd $EXIT_FAILURE
-}
-
-
-
-
-## ----------- ##
-##    Main.    ##
-## ----------- ##
-
-# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_lalib_p ()
-{
-    test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null \
-        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
-# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function implements the same check as func_lalib_p without
-# resorting to external programs.  To this end, it redirects stdin and
-# closes it afterwards, without saving the original file descriptor.
-# As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if `file' does not exist.
-func_lalib_unsafe_p ()
-{
-    lalib_p=no
-    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
-	for lalib_p_l in 1 2 3 4
-	do
-	    read lalib_p_line
-	    case "$lalib_p_line" in
-		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
-	    esac
-	done
-	exec 0<&5 5<&-
-    fi
-    test "$lalib_p" = yes
-}
-
-# func_ltwrapper_script_p file
-# True iff FILE is a libtool wrapper script
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_script_p ()
-{
-    func_lalib_p "$1"
-}
-
-# func_ltwrapper_executable_p file
-# True iff FILE is a libtool wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_executable_p ()
-{
-    func_ltwrapper_exec_suffix=
-    case $1 in
-    *.exe) ;;
-    *) func_ltwrapper_exec_suffix=.exe ;;
-    esac
-    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
-}
-
-# func_ltwrapper_scriptname file
-# Assumes file is an ltwrapper_executable
-# uses $file to determine the appropriate filename for a
-# temporary ltwrapper_script.
-func_ltwrapper_scriptname ()
-{
-    func_dirname_and_basename "$1" "" "."
-    func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-}
-
-# func_ltwrapper_p file
-# True iff FILE is a libtool wrapper script or wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_p ()
-{
-    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
-}
-
-
-# func_execute_cmds commands fail_cmd
-# Execute tilde-delimited COMMANDS.
-# If FAIL_CMD is given, eval that upon failure.
-# FAIL_CMD may read-access the current command in variable CMD!
-func_execute_cmds ()
-{
-    $opt_debug
-    save_ifs=$IFS; IFS='~'
-    for cmd in $1; do
-      IFS=$save_ifs
-      eval cmd=\"$cmd\"
-      func_show_eval "$cmd" "${2-:}"
-    done
-    IFS=$save_ifs
-}
-
-
-# func_source file
-# Source FILE, adding directory component if necessary.
-# Note that it is not necessary on cygwin/mingw to append a dot to
-# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
-# behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
-func_source ()
-{
-    $opt_debug
-    case $1 in
-    */* | *\\*)	. "$1" ;;
-    *)		. "./$1" ;;
-    esac
-}
-
-
-# func_resolve_sysroot PATH
-# Replace a leading = in PATH with a sysroot.  Store the result into
-# func_resolve_sysroot_result
-func_resolve_sysroot ()
-{
-  func_resolve_sysroot_result=$1
-  case $func_resolve_sysroot_result in
-  =*)
-    func_stripname '=' '' "$func_resolve_sysroot_result"
-    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
-    ;;
-  esac
-}
-
-# func_replace_sysroot PATH
-# If PATH begins with the sysroot, replace it with = and
-# store the result into func_replace_sysroot_result.
-func_replace_sysroot ()
-{
-  case "$lt_sysroot:$1" in
-  ?*:"$lt_sysroot"*)
-    func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result="=$func_stripname_result"
-    ;;
-  *)
-    # Including no sysroot.
-    func_replace_sysroot_result=$1
-    ;;
-  esac
-}
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-    $opt_debug
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	func_append_quoted CC_quoted "$arg"
-      done
-      CC_expanded=`func_echo_all $CC`
-      CC_quoted_expanded=`func_echo_all $CC_quoted`
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	      # Double-quote args containing other shell metacharacters.
-	      func_append_quoted CC_quoted "$arg"
-	    done
-	    CC_expanded=`func_echo_all $CC`
-	    CC_quoted_expanded=`func_echo_all $CC_quoted`
-	    case "$@ " in
-	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  func_echo "unable to infer tagged configuration"
-	  func_fatal_error "specify a tag with \`--tag'"
-#	else
-#	  func_verbose "using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-}
-
-
-
-# func_write_libtool_object output_name pic_name nonpic_name
-# Create a libtool object file (analogous to a ".la" file),
-# but don't create it if we're doing a dry run.
-func_write_libtool_object ()
-{
-    write_libobj=${1}
-    if test "$build_libtool_libs" = yes; then
-      write_lobj=\'${2}\'
-    else
-      write_lobj=none
-    fi
-
-    if test "$build_old_libs" = yes; then
-      write_oldobj=\'${3}\'
-    else
-      write_oldobj=none
-    fi
-
-    $opt_dry_run || {
-      cat >${write_libobj}T <<EOF
-# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-pic_object=$write_lobj
-
-# Name of the non-PIC object
-non_pic_object=$write_oldobj
-
-EOF
-      $MV "${write_libobj}T" "${write_libobj}"
-    }
-}
-
-
-##################################################
-# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-##################################################
-
-# func_convert_core_file_wine_to_w32 ARG
-# Helper function used by file name conversion functions when $build is *nix,
-# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-# correctly configured wine environment available, with the winepath program
-# in $build's $PATH.
-#
-# ARG is the $build file name to be converted to w32 format.
-# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-# be empty on error (or when ARG is empty)
-func_convert_core_file_wine_to_w32 ()
-{
-  $opt_debug
-  func_convert_core_file_wine_to_w32_result="$1"
-  if test -n "$1"; then
-    # Unfortunately, winepath does not exit with a non-zero error code, so we
-    # are forced to check the contents of stdout. On the other hand, if the
-    # command is not found, the shell will set an exit code of 127 and print
-    # *an error message* to stdout. So we must check for both error code of
-    # zero AND non-empty stdout, which explains the odd construction:
-    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
-      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$lt_sed_naive_backslashify"`
-    else
-      func_convert_core_file_wine_to_w32_result=
-    fi
-  fi
-}
-# end: func_convert_core_file_wine_to_w32
-
-
-# func_convert_core_path_wine_to_w32 ARG
-# Helper function used by path conversion functions when $build is *nix, and
-# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-# configured wine environment available, with the winepath program in $build's
-# $PATH. Assumes ARG has no leading or trailing path separator characters.
-#
-# ARG is path to be converted from $build format to win32.
-# Result is available in $func_convert_core_path_wine_to_w32_result.
-# Unconvertible file (directory) names in ARG are skipped; if no directory names
-# are convertible, then the result may be empty.
-func_convert_core_path_wine_to_w32 ()
-{
-  $opt_debug
-  # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=""
-  if test -n "$1"; then
-    oldIFS=$IFS
-    IFS=:
-    for func_convert_core_path_wine_to_w32_f in $1; do
-      IFS=$oldIFS
-      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
-        if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
-        else
-          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
-        fi
-      fi
-    done
-    IFS=$oldIFS
-  fi
-}
-# end: func_convert_core_path_wine_to_w32
-
-
-# func_cygpath ARGS...
-# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-# (2), returns the Cygwin file name or path in func_cygpath_result (input
-# file name or path is assumed to be in w32 format, as previously converted
-# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-# or path in func_cygpath_result (input file name or path is assumed to be in
-# Cygwin format). Returns an empty string on error.
-#
-# ARGS are passed to cygpath, with the last one being the file name or path to
-# be converted.
-#
-# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-# environment variable; do not put it in $PATH.
-func_cygpath ()
-{
-  $opt_debug
-  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
-    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
-    if test "$?" -ne 0; then
-      # on failure, ensure result is empty
-      func_cygpath_result=
-    fi
-  else
-    func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
-  fi
-}
-#end: func_cygpath
-
-
-# func_convert_core_msys_to_w32 ARG
-# Convert file name or path ARG from MSYS format to w32 format.  Return
-# result in func_convert_core_msys_to_w32_result.
-func_convert_core_msys_to_w32 ()
-{
-  $opt_debug
-  # awkward: cmd appends spaces to result
-  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-}
-#end: func_convert_core_msys_to_w32
-
-
-# func_convert_file_check ARG1 ARG2
-# Verify that ARG1 (a file name in $build format) was converted to $host
-# format in ARG2. Otherwise, emit an error message, but continue (resetting
-# func_to_host_file_result to ARG1).
-func_convert_file_check ()
-{
-  $opt_debug
-  if test -z "$2" && test -n "$1" ; then
-    func_error "Could not determine host file name corresponding to"
-    func_error "  \`$1'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback:
-    func_to_host_file_result="$1"
-  fi
-}
-# end func_convert_file_check
-
-
-# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-# Verify that FROM_PATH (a path in $build format) was converted to $host
-# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-# func_to_host_file_result to a simplistic fallback value (see below).
-func_convert_path_check ()
-{
-  $opt_debug
-  if test -z "$4" && test -n "$3"; then
-    func_error "Could not determine the host path corresponding to"
-    func_error "  \`$3'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback.  This is a deliberately simplistic "conversion" and
-    # should not be "improved".  See libtool.info.
-    if test "x$1" != "x$2"; then
-      lt_replace_pathsep_chars="s|$1|$2|g"
-      func_to_host_path_result=`echo "$3" |
-        $SED -e "$lt_replace_pathsep_chars"`
-    else
-      func_to_host_path_result="$3"
-    fi
-  fi
-}
-# end func_convert_path_check
-
-
-# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-# and appending REPL if ORIG matches BACKPAT.
-func_convert_path_front_back_pathsep ()
-{
-  $opt_debug
-  case $4 in
-  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
-    ;;
-  esac
-  case $4 in
-  $2 ) func_to_host_path_result+="$3"
-    ;;
-  esac
-}
-# end func_convert_path_front_back_pathsep
-
-
-##################################################
-# $build to $host FILE NAME CONVERSION FUNCTIONS #
-##################################################
-# invoked via `$to_host_file_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# Result will be available in $func_to_host_file_result.
-
-
-# func_to_host_file ARG
-# Converts the file name ARG from $build format to $host format. Return result
-# in func_to_host_file_result.
-func_to_host_file ()
-{
-  $opt_debug
-  $to_host_file_cmd "$1"
-}
-# end func_to_host_file
-
-
-# func_to_tool_file ARG LAZY
-# converts the file name ARG from $build format to toolchain format. Return
-# result in func_to_tool_file_result.  If the conversion in use is listed
-# in (the comma separated) LAZY, no conversion takes place.
-func_to_tool_file ()
-{
-  $opt_debug
-  case ,$2, in
-    *,"$to_tool_file_cmd",*)
-      func_to_tool_file_result=$1
-      ;;
-    *)
-      $to_tool_file_cmd "$1"
-      func_to_tool_file_result=$func_to_host_file_result
-      ;;
-  esac
-}
-# end func_to_tool_file
-
-
-# func_convert_file_noop ARG
-# Copy ARG to func_to_host_file_result.
-func_convert_file_noop ()
-{
-  func_to_host_file_result="$1"
-}
-# end func_convert_file_noop
-
-
-# func_convert_file_msys_to_w32 ARG
-# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_file_result.
-func_convert_file_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_w32
-
-
-# func_convert_file_cygwin_to_w32 ARG
-# Convert file name ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_file_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
-    # LT_CYGPATH in this case.
-    func_to_host_file_result=`cygpath -m "$1"`
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_cygwin_to_w32
-
-
-# func_convert_file_nix_to_w32 ARG
-# Convert file name ARG from *nix to w32 format.  Requires a wine environment
-# and a working winepath. Returns result in func_to_host_file_result.
-func_convert_file_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_w32
-
-
-# func_convert_file_msys_to_cygwin ARG
-# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_file_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_cygwin
-
-
-# func_convert_file_nix_to_cygwin ARG
-# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
-# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
-# in func_to_host_file_result.
-func_convert_file_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
-    func_convert_core_file_wine_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_cygwin
-
-
-#############################################
-# $build to $host PATH CONVERSION FUNCTIONS #
-#############################################
-# invoked via `$to_host_path_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# The result will be available in $func_to_host_path_result.
-#
-# Path separators are also converted from $build format to $host format.  If
-# ARG begins or ends with a path separator character, it is preserved (but
-# converted to $host format) on output.
-#
-# All path conversion functions are named using the following convention:
-#   file name conversion function    : func_convert_file_X_to_Y ()
-#   path conversion function         : func_convert_path_X_to_Y ()
-# where, for any given $build/$host combination the 'X_to_Y' value is the
-# same.  If conversion functions are added for new $build/$host combinations,
-# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-# will break.
-
-
-# func_init_to_host_path_cmd
-# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-# appropriate value, based on the value of $to_host_file_cmd.
-to_host_path_cmd=
-func_init_to_host_path_cmd ()
-{
-  $opt_debug
-  if test -z "$to_host_path_cmd"; then
-    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd="func_convert_path_${func_stripname_result}"
-  fi
-}
-
-
-# func_to_host_path ARG
-# Converts the path ARG from $build format to $host format. Return result
-# in func_to_host_path_result.
-func_to_host_path ()
-{
-  $opt_debug
-  func_init_to_host_path_cmd
-  $to_host_path_cmd "$1"
-}
-# end func_to_host_path
-
-
-# func_convert_path_noop ARG
-# Copy ARG to func_to_host_path_result.
-func_convert_path_noop ()
-{
-  func_to_host_path_result="$1"
-}
-# end func_convert_path_noop
-
-
-# func_convert_path_msys_to_w32 ARG
-# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_path_result.
-func_convert_path_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from ARG.  MSYS
-    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
-    # and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_msys_to_w32
-
-
-# func_convert_path_cygwin_to_w32 ARG
-# Convert path ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_path_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_cygwin_to_w32
-
-
-# func_convert_path_nix_to_w32 ARG
-# Convert path ARG from *nix to w32 format.  Requires a wine environment and
-# a working winepath.  Returns result in func_to_host_file_result.
-func_convert_path_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_nix_to_w32
-
-
-# func_convert_path_msys_to_cygwin ARG
-# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_path_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_msys_to_cygwin
-
-
-# func_convert_path_nix_to_cygwin ARG
-# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
-# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
-# func_to_host_file_result.
-func_convert_path_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from
-    # ARG. msys behavior is inconsistent here, cygpath turns them
-    # into '.;' and ';.', and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_nix_to_cygwin
-
-
-# func_mode_compile arg...
-func_mode_compile ()
-{
-    $opt_debug
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
-    pie_flag=
-
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
-	arg_mode=normal
-	;;
-
-      target )
-	libobj="$arg"
-	arg_mode=normal
-	continue
-	;;
-
-      normal )
-	# Accept any command-line options.
-	case $arg in
-	-o)
-	  test -n "$libobj" && \
-	    func_fatal_error "you cannot specify \`-o' more than once"
-	  arg_mode=target
-	  continue
-	  ;;
-
-	-pie | -fpie | -fPIE)
-          pie_flag+=" $arg"
-	  continue
-	  ;;
-
-	-shared | -static | -prefer-pic | -prefer-non-pic)
-	  later+=" $arg"
-	  continue
-	  ;;
-
-	-no-suppress)
-	  suppress_opt=no
-	  continue
-	  ;;
-
-	-Xcompiler)
-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
-	  continue      #  The current "srcfile" will either be retained or
-	  ;;            #  replaced later.  I would guess that would be a bug.
-
-	-Wc,*)
-	  func_stripname '-Wc,' '' "$arg"
-	  args=$func_stripname_result
-	  lastarg=
-	  save_ifs="$IFS"; IFS=','
-	  for arg in $args; do
-	    IFS="$save_ifs"
-	    func_append_quoted lastarg "$arg"
-	  done
-	  IFS="$save_ifs"
-	  func_stripname ' ' '' "$lastarg"
-	  lastarg=$func_stripname_result
-
-	  # Add the arguments to base_compile.
-	  base_compile+=" $lastarg"
-	  continue
-	  ;;
-
-	*)
-	  # Accept the current argument as the source file.
-	  # The previous "srcfile" becomes the current argument.
-	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
-	  ;;
-	esac  #  case $arg
-	;;
-      esac    #  case $arg_mode
-
-      # Aesthetically quote the previous argument.
-      func_append_quoted base_compile "$lastarg"
-    done # for arg
-
-    case $arg_mode in
-    arg)
-      func_fatal_error "you must specify an argument for -Xcompile"
-      ;;
-    target)
-      func_fatal_error "you must specify a target with \`-o'"
-      ;;
-    *)
-      # Get the name of the library object.
-      test -z "$libobj" && {
-	func_basename "$srcfile"
-	libobj="$func_basename_result"
-      }
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    case $libobj in
-    *.[cCFSifmso] | \
-    *.ada | *.adb | *.ads | *.asm | \
-    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
-      func_xform "$libobj"
-      libobj=$func_xform_result
-      ;;
-    esac
-
-    case $libobj in
-    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
-    *)
-      func_fatal_error "cannot determine name of library object from \`$libobj'"
-      ;;
-    esac
-
-    func_infer_tag $base_compile
-
-    for arg in $later; do
-      case $arg in
-      -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
-	build_old_libs=no
-	continue
-	;;
-
-      -static)
-	build_libtool_libs=no
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-      esac
-    done
-
-    func_quote_for_eval "$libobj"
-    test "X$libobj" != "X$func_quote_for_eval_result" \
-      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
-      && func_warning "libobj name \`$libobj' may not contain shell special characters."
-    func_dirname_and_basename "$obj" "/" ""
-    objname="$func_basename_result"
-    xdir="$func_dirname_result"
-    lobj=${xdir}$objdir/$objname
-
-    test -z "$base_compile" && \
-      func_fatal_help "you must specify a compilation command"
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2* | cegcc*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-	func_echo "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	$ECHO "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-      removelist+=" $output_obj"
-      $ECHO "$srcfile" > "$lockfile"
-    fi
-
-    $opt_dry_run || $RM $removelist
-    removelist+=" $lockfile"
-    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-
-    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
-    srcfile=$func_to_tool_file_result
-    func_quote_for_eval "$srcfile"
-    qsrcfile=$func_quote_for_eval_result
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $qsrcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      fi
-
-      func_mkdir_p "$xdir$objdir"
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	command+=" -o $lobj"
-      fi
-
-      func_show_eval_locale "$command"	\
-          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	func_show_eval '$MV "$output_obj" "$lobj"' \
-	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-
-      # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
-	suppress_output=' >/dev/null 2>&1'
-      fi
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $qsrcfile$pie_flag"
-      else
-	command="$base_compile $qsrcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	command+=" -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command+="$suppress_output"
-      func_show_eval_locale "$command" \
-        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	func_show_eval '$MV "$output_obj" "$obj"' \
-	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-    fi
-
-    $opt_dry_run || {
-      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
-
-      # Unlock the critical section if it was locked
-      if test "$need_locks" != no; then
-	removelist=$lockfile
-        $RM "$lockfile"
-      fi
-    }
-
-    exit $EXIT_SUCCESS
-}
-
-$opt_help || {
-  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
-}
-
-func_mode_help ()
-{
-    # We need to display help for each of the modes.
-    case $opt_mode in
-      "")
-        # Generic help is extracted from the usage comments
-        # at the start of this file.
-        func_help
-        ;;
-
-      clean)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      compile)
-      $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to build PIC objects only
-  -prefer-non-pic   try to build non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
-  -Wc,FLAG          pass FLAG directly to the compiler
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-        ;;
-
-      execute)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-        ;;
-
-      finish)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-        ;;
-
-      install)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
-  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-        ;;
-
-      link)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -bindir BINDIR    specify path to binaries directory (for systems where
-                    libraries must be found in the PATH setting at runtime)
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -shared           only do dynamic linking of libtool libraries
-  -shrext SUFFIX    override the standard shared library file extension
-  -static           do not do any

<TRUNCATED>


Mime
View raw message