qpid-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From jr...@apache.org
Subject [43/51] [partial] qpid-site git commit: QPID-7353: Update for the Qpid C++ 1.35.0 release
Date Tue, 06 Sep 2016 17:00:06 GMT
http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html
new file mode 100644
index 0000000..7297dbe
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html
@@ -0,0 +1,251 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements.  See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership.  The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License.  You may obtain a copy of the License at
+ -
+ -   http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied.  See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+  <head>
+    <title>AMQP Messaging Broker (Implemented in C++) - Apache Qpid&#8482;</title>
+    <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+    <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+    <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+    <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+    <script type="text/javascript">var _deferredFunctions = [];</script>
+    <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+    <!--[if lte IE 8]>
+      <link rel="stylesheet" href="/ie.css" type="text/css"/>
+      <script type="text/javascript" src="/html5shiv.js"></script>
+    <![endif]-->
+
+    <!-- Redirects for `go get` and godoc.org -->
+    <meta name="go-import"
+          content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+    <meta name="go-source"
+          content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+  </head>
+  <body>
+    <div id="-content">
+      <div id="-top" class="panel">
+        <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+        <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+        <ul id="-global-navigation">
+          <li><a id="-logotype" href="/index.html">Apache Qpid<sup>&#8482;</sup></a></li>
+          <li><a href="/documentation.html">Documentation</a></li>
+          <li><a href="/download.html">Download</a></li>
+          <li><a href="/discussion.html">Discussion</a></li>
+        </ul>
+      </div>
+
+      <div id="-menu" class="panel" style="display: none;">
+        <div class="flex">
+          <section>
+            <h3>Project</h3>
+
+            <ul>
+              <li><a href="/overview.html">Overview</a></li>
+              <li><a href="/components/index.html">Components</a></li>
+              <li><a href="/releases/index.html">Releases</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Messaging APIs</h3>
+
+            <ul>
+              <li><a href="/proton/index.html">Qpid Proton</a></li>
+              <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+              <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Servers and tools</h3>
+
+            <ul>
+              <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+              <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+              <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Resources</h3>
+
+            <ul>
+              <li><a href="/dashboard.html">Dashboard</a></li>
+              <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+              <li><a href="/resources.html">More resources</a></li>
+            </ul>
+          </section>
+        </div>
+      </div>
+
+      <div id="-search" class="panel" style="display: none;">
+        <form action="http://www.google.com/search" method="get">
+          <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+          <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+          <button type="submit">Search</button>
+          <a href="/search.html">More ways to search</a>
+        </form>
+      </div>
+
+      <div id="-middle" class="panel">
+        <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li><a href="/releases/qpid-cpp-1.35.0/index.html">Qpid C++ 1.35.0</a></li><li>AMQP Messaging Broker (Implemented in C++)</li></ul>
+
+        <div id="-middle-content">
+          <div class="docbook"><div class="navheader"><table summary="Navigation header" width="100%"><tr><th align="center" colspan="3">AMQP Messaging Broker (Implemented in C++)</th></tr><tr><td align="left" width="20%">&#160;</td><th align="center" width="60%">&#160;</th><td align="right" width="20%">&#160;<a accesskey="n" href="pr01.html">Next</a></td></tr></table><hr /></div><div class="book"><div class="titlepage"><div><div><h1 class="title"><a id="idm140173367409168"></a>AMQP Messaging Broker (Implemented in C++)</h1></div></div><hr /></div><div class="toc"><p><strong>Table of Contents</strong></p><dl class="toc"><dt><span class="preface"><a href="pr01.html">Introduction</a></span></dt><dt><span class="chapter"><a href="ch01.html">1. 
+      Running the AMQP Messaging Broker
+    </a></span></dt><dd><dl><dt><span class="section"><a href="ch01.html#section-Running-a-Qpid-CPP-Broker">1.1. 
+    Running a Qpid C++ Broker
+  </a></span></dt><dd><dl><dt><span class="section"><a href="ch01.html#RASC-BuildingtheCppBrokerandClientLibraries">1.1.1. 
+            Building the
+            C++ Broker and Client Libraries
+          </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-RunningtheCppBroker">1.1.2. 
+            Running the C++ Broker
+          </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-Mostcommonquestionsgettingqpiddrunning">1.1.3. 
+            Most
+            common questions getting qpidd running
+          </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-Authentication">1.1.4. 
+            Authentication
+          </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-Slightlymorecomplexconfiguration">1.1.5. 
+            Slightly more
+            complex configuration
+          </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-Loadingextramodules">1.1.6. 
+            Loading extra modules
+          </a></span></dt><dt><span class="section"><a href="ch01.html#RASC-message-timestamps">1.1.7. Timestamping Received Messages</a></span></dt><dt><span class="section"><a href="ch01.html#RASC-logging-options">1.1.8. Logging Options</a></span></dt></dl></dd><dt><span class="section"><a href="ch01s02.html">1.2. 
+      Cheat Sheet for configuring Queue Options
+    </a></span></dt><dd><dl><dt><span class="section"><a href="ch01s02.html#CheatSheetforconfiguringQueueOptions-ConfiguringQueueOptions">1.2.1. 
+            Configuring
+            Queue Options
+          </a></span></dt></dl></dd><dt><span class="section"><a href="ch01s03.html">1.3. 
+    Cheat Sheet for configuring Exchange Options
+  </a></span></dt><dd><dl><dt><span class="section"><a href="ch01s03.html#CheatSheetforconfiguringExchangeOptions-ConfiguringExchangeOptions">1.3.1. 
+      Configuring Exchange Options
+    </a></span></dt></dl></dd><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html">1.4. Broker Federation</a></span></dt><dd><dl><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#sect-Messaging_User_Guide-Broker_Federation-Message_Routes">1.4.1. Message Routes</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#sect-Messaging_User_Guide-Broker_Federation-Federation_Topologies">1.4.2. Federation Topologies</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#sect-Messaging_User_Guide-Broker_Federation-Federation_among_High_Availability_Message_Clusters">1.4.3. Federation among High Availability Message Clusters</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#sect-Messaging_User_Guide-Broker_Federation-The_qpid_route_Utility">1.4.4. The qpid-route Utility</a></span></dt><dt><spa
 n class="section"><a href="chap-Messaging_User_Guide-Broker_Federation.html#federation-broker-options">1.4.5. Broker options affecting federation</a></span></dt></dl></dd><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html">1.5. Security</a></span></dt><dd><dl><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html#sect-Messaging_User_Guide-Security-User_Authentication">1.5.1. User Authentication</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html#sect-Messaging_User_Guide-Security-Authorization">1.5.2. Authorization</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html#sect-Messaging_User_Guide-Authorization-Specifying_ACL_Quotas">1.5.3. User Connection and Queue Quotas</a></span></dt><dt><span class="section"><a href="chap-Messaging_User_Guide-Security.html#sect-Messaging_User_Guide-Security-Encryption_using_SSL">1.5.4. Encryption using SSL</a></span></dt></dl></dd><
 dt><span class="section"><a href="ch01s06.html">1.6. LVQ - Last Value Queue</a></span></dt><dd><dl><dt><span class="section"><a href="ch01s06.html#LVQ-UnderstandingLVQ">1.6.1. Understanding LVQ</a></span></dt><dt><span class="section"><a href="ch01s06.html#LVQ-Creating">1.6.2. Creating a Last Value Queue</a></span></dt><dt><span class="section"><a href="ch01s06.html#LVQ-Example">1.6.3. LVQ Example</a></span></dt><dt><span class="section"><a href="ch01s06.html#LVQ-Deprecated">1.6.4. Deprecated LVQ Modes</a></span></dt></dl></dd><dt><span class="section"><a href="queue-state-replication.html">1.7. 
+    Queue State Replication
+  </a></span></dt><dd><dl><dt><span class="section"><a href="queue-state-replication.html#queuestatereplication-AsynchronousReplicationofQueueState">1.7.1. 
+      Asynchronous
+      Replication of Queue State
+    </a></span></dt></dl></dd><dt><span class="section"><a href="producer-flow-control.html">1.8. 
+    Producer Flow Control
+  </a></span></dt><dd><dl><dt><span class="section"><a href="producer-flow-control.html#producerflowcontrol-Overview">1.8.1. 
+      Overview
+    </a></span></dt><dt><span class="section"><a href="producer-flow-control.html#producerflowcontrol-UserInterface">1.8.2. 
+        User Interface
+      </a></span></dt></dl></dd><dt><span class="section"><a href="AMQP-Compatibility.html">1.9. 
+      AMQP compatibility
+    </a></span></dt><dd><dl><dt><span class="section"><a href="AMQP-Compatibility.html#AMQPcompatibility-AMQPCompatibilityofQpidreleases-3A">1.9.1. 
+            AMQP
+            Compatibility of Qpid releases:
+          </a></span></dt><dt><span class="section"><a href="AMQP-Compatibility.html#AMQPcompatibility-InteroptablebyAMQPspecificationversion">1.9.2. 
+            Interop
+            table by AMQP specification version
+          </a></span></dt></dl></dd><dt><span class="section"><a href="QpidInteroperabilityDocumentation-QpidInteroperabilityDocumentation.html">1.10. Qpid Interoperability Documentation</a></span></dt><dd><dl><dt><span class="section"><a href="QpidInteroperabilityDocumentation-QpidInteroperabilityDocumentation.html#QpidInteroperabilityDocumentation-SASL">1.10.1. 
+            SASL
+          </a></span></dt></dl></dd><dt><span class="section"><a href="Using-message-groups.html">1.11. 
+    Using Message Groups
+  </a></span></dt><dd><dl><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-Overview">1.11.1. 
+      Overview
+    </a></span></dt><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-GroupingMessages">1.11.2. 
+        Grouping Messages
+      </a></span></dt><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-BrokerRole">1.11.3. 
+        The Role of the Broker
+      </a></span></dt><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-ConsumerGuide">1.11.4. 
+        Well Behaved Consumers
+      </a></span></dt><dt><span class="section"><a href="Using-message-groups.html#usingmessagegroups-BrokerConfig">1.11.5. 
+        Broker Configuration
+      </a></span></dt></dl></dd><dt><span class="section"><a href="chapter-ha.html">1.12. Active-Passive Messaging Clusters</a></span></dt><dd><dl><dt><span class="section"><a href="chapter-ha.html#ha-overview">1.12.1. Overview</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-virtual-ip">1.12.2. Virtual IP Addresses</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-broker-config">1.12.3. Configuring the Brokers</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-rm">1.12.4. The Cluster Resource Manager</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-rm-config">1.12.5. Configuring with <span class="command"><strong>rgmanager</strong></span> as resource manager</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-broker-admin">1.12.6. Broker Administration Tools</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-replicate-values">1.12.7. Controlling replication of queues and 
 exchanges</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-failover">1.12.8. Client Connection and Fail-over</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-security">1.12.9. Security and Access Control.</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-other-rm">1.12.10. Integrating with other Cluster Resource Managers</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-store">1.12.11. Using a message store in a cluster</a></span></dt><dt><span class="section"><a href="chapter-ha.html#ha-troubleshoot">1.12.12. Troubleshooting a cluster</a></span></dt></dl></dd><dt><span class="section"><a href="ha-queue-replication.html">1.13. Replicating Queues with the HA module</a></span></dt><dd><dl><dt><span class="section"><a href="ha-queue-replication.html#idm140173354836560">1.13.1. Replicating queues</a></span></dt><dt><span class="section"><a href="ha-queue-replication.html#idm140173356524352">1.13.2. Replicating
  queues between clusters</a></span></dt></dl></dd></dl></dd><dt><span class="chapter"><a href="chapter-Managing-CPP-Broker.html">2. 
+      Managing the AMQP Messaging Broker
+    </a></span></dt><dd><dl><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#section-Managing-CPP-Broker">2.1.  Managing the C++ Broker </a></span></dt><dd><dl><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#MgmtC-2B-2B-Usingqpidconfig">2.1.1. 
+            Using qpid-config
+          </a></span></dt><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#MgmtC-2B-2B-Usingqpidroute">2.1.2. 
+            Using qpid-route
+          </a></span></dt><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#MgmtC-2B-2B-Usingqpidtool">2.1.3. 
+            Using qpid-tool
+          </a></span></dt><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#MgmtC-2B-2B-Usingqpidprintevents">2.1.4. 
+            Using
+            qpid-printevents
+          </a></span></dt><dt><span class="section"><a href="chapter-Managing-CPP-Broker.html#idm140173356835712">2.1.5. Using qpid-ha</a></span></dt></dl></dd><dt><span class="section"><a href="ch02s02.html">2.2. 
+      Qpid Management Framework
+    </a></span></dt><dd><dl><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-WhatIsQMF">2.2.1. 
+            What Is QMF
+          </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-GettingStartedwithQMF">2.2.2. 
+            Getting
+            Started with QMF
+          </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-QMFConcepts">2.2.3. 
+            QMF Concepts
+          </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-TheQMFProtocol">2.2.4. 
+            The QMF
+            Protocol
+          </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-HowtoWriteaQMFConsole">2.2.5. 
+            How
+            to Write a QMF Console
+          </a></span></dt><dt><span class="section"><a href="ch02s02.html#QpidManagementFramework-HowtoWriteaQMFAgent">2.2.6. 
+            How to
+            Write a QMF Agent
+          </a></span></dt></dl></dd><dt><span class="section"><a href="ch02s03.html">2.3. 
+      QMF Python Console Tutorial
+    </a></span></dt><dd><dl><dt><span class="section"><a href="ch02s03.html#QMFPythonConsoleTutorial-PrerequisiteInstallQpidMessaging">2.3.1. 
+            Prerequisite
+            - Install Qpid Messaging
+          </a></span></dt><dt><span class="section"><a href="ch02s03.html#QMFPythonConsoleTutorial-SynchronousConsoleOperations">2.3.2. 
+            Synchronous
+            Console Operations
+          </a></span></dt><dt><span class="section"><a href="ch02s03.html#QMFPythonConsoleTutorial-AsynchronousConsoleOperations">2.3.3. 
+            Asynchronous
+            Console Operations
+          </a></span></dt><dt><span class="section"><a href="ch02s03.html#QMFPythonConsoleTutorial-DiscoveringwhatKindsofObjectsareAvailable">2.3.4. 
+            Discovering what Kinds of Objects are Available
+          </a></span></dt></dl></dd></dl></dd></dl></div><div class="list-of-tables"><p><strong>List of Tables</strong></p><dl><dt>1.1. <a href="ch01.html#idm140173359592576">QMF Management - Broker Methods for Managing the Timestamp Configuration</a></dt><dt>1.2. <a href="ch01.html#idm140173359579408">C++ Broker Log Severity Levels</a></dt><dt>1.3. <a href="ch01.html#idm140173359567776">C++ Broker Log Categories</a></dt><dt>1.4. <a href="ch01.html#idm140173359554912">C++ Broker Log Statement Attributes</a></dt><dt>1.5. <a href="ch01.html#idm140173359543920">C++ Broker Log Enable/Disable RULE Format</a></dt><dt>1.6. <a href="ch01.html#idm140173359533472">C++ Broker Log Enable/Disable Settings Tables</a></dt><dt>1.7. <a href="ch01.html#idm140173359522352">C++ Broker Log Statement Visibility Determination</a></dt><dt>1.8. <a href="ch01.html#idm140173359509056">QMF Management - Broker Methods for Managing the Log Enable/Disable Settings</a></dt><dt>1.9. <a href="chap-Messaging_User_Gui
 de-Broker_Federation.html#tabl-Messaging_User_Guide-The_qpid_route_Utility-qpid_route_options"><span class="command">qpid-route</span> options</a></dt><dt>1.10. <a href="chap-Messaging_User_Guide-Broker_Federation.html#tabl-Messaging_User_Guide-Resilient_Connections-State_values_in_qpid_route_list_connections">State values in <span class="command">$ qpid-route list connections</span></a></dt><dt>1.11. <a href="chap-Messaging_User_Guide-Broker_Federation.html#federation-broker-options-table">Broker Options for Federation</a></dt><dt>1.12. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_Rules_permission">ACL Rules: permission</a></dt><dt>1.13. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_Rulesaction">ACL Rules: action</a></dt><dt>1.14. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_Rulesobject">ACL Rules:object</a></dt><dt>1.15. <a href="chap-Messaging_User
 _Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_Rulesproperty">ACL Rules: property</a></dt><dt>1.16. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_ActionObject_properties">Broker Lookup Events With Allowed Action, Object, and Properties</a></dt><dt>1.17. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_UsernameSubstitution">ACL User Name and Domain Name Substitution Keywords</a></dt><dt>1.18. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-ACL_Syntax-ACL_TopicExchangeMatch">Topic Exchange Wildcard Match Examples</a></dt><dt>1.19. <a href="chap-Messaging_User_Guide-Security.html#tabl-Messaging_User_Guide-Enabling_SSL_in_Clients-SSL_Client_Environment_Variables_for_C_clients">SSL Client Environment Variables for C++ clients</a></dt><dt>1.20. <a href="producer-flow-control.html#idm140173355457344">Queue Declare Method Flow Control Arguments</a></dt><dt>1.21. <a 
 href="producer-flow-control.html#idm140173358710048">Flow Control Statistics available in Queue's QMF Class</a></dt><dt>1.22. <a href="AMQP-Compatibility.html#idm140173353934112">AMQP Version Support by Qpid Release</a></dt><dt>1.23. <a href="AMQP-Compatibility.html#idm140173355678896">AMQP Version Support - alternate format</a></dt><dt>1.24. <a href="QpidInteroperabilityDocumentation-QpidInteroperabilityDocumentation.html#idm140173357589616">SASL Mechanism Support</a></dt><dt>1.25. <a href="QpidInteroperabilityDocumentation-QpidInteroperabilityDocumentation.html#idm140173356693152">SASL Custom Mechanisms</a></dt><dt>1.26. <a href="Using-message-groups.html#idm140173354541888">qpid-config options for creating message group queues</a></dt><dt>1.27. <a href="Using-message-groups.html#idm140173355737184">Queue Declare/Address Syntax Message Group Configuration Arguments</a></dt><dt>1.28. <a href="chapter-ha.html#ha-broker-options">Broker Options for High Availability Messaging Cluster<
 /a></dt><dt>1.29. <a href="chapter-ha.html#ha-security-options">HA Security Options</a></dt><dt>2.1. <a href="ch02s02.html#idm140173358965968">XML Attributes for QMF Properties and Statistics</a></dt><dt>2.2. <a href="ch02s02.html#idm140173355554944">QMF Datatypes</a></dt><dt>2.3. <a href="ch02s02.html#idm140173353645952">XML Schema Mapping for QMF Types</a></dt><dt>2.4. <a href="ch02s03.html#idm140173354776496">QMF Python Console Class Methods</a></dt></dl></div><div class="list-of-examples"><p><strong>List of Examples</strong></p><dl><dt>1.1. <a href="ch01.html#idm140173359586608">Enabling Message Timestamping via QMF - Python</a></dt><dt>1.2. <a href="ch01.html#idm140173359500912">
+	Querying Log Settings via qpid-ctrl utility
+      </a></dt><dt>1.3. <a href="ch01.html#idm140173359497056">
+	Setting Log Settings via qpid-ctrl utility
+      </a></dt><dt>1.4. <a href="Using-message-groups.html#idm140173354612320">Creating a message group queue via qpid-config</a></dt><dt>1.5. <a href="Using-message-groups.html#idm140173353726960">Creating a message group queue using address syntax (C++)</a></dt><dt>1.6. <a href="Using-message-groups.html#idm140173354094592">Overriding the default message group identifier for the broker</a></dt></dl></div></div><div class="navfooter"><hr /><table summary="Navigation footer" width="100%"><tr><td align="left" width="40%">&#160;</td><td align="center" width="20%">&#160;</td><td align="right" width="40%">&#160;<a accesskey="n" href="pr01.html">Next</a></td></tr><tr><td align="left" valign="top" width="40%">&#160;</td><td align="center" width="20%">&#160;</td><td align="right" valign="top" width="40%">&#160;Introduction</td></tr></table></div></div>
+
+          <hr/>
+
+          <ul id="-apache-navigation">
+            <li><a href="http://www.apache.org/">Apache</a></li>
+            <li><a href="http://www.apache.org/licenses/">License</a></li>
+            <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+            <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+            <li><a href="/security.html">Security</a></li>
+            <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+          </ul>
+
+          <p id="-legal">
+            Apache Qpid, Messaging built on AMQP; Copyright &#169; 2015
+            The Apache Software Foundation; Licensed under
+            the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+            License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+            Proton, Apache, the Apache feather logo, and the Apache Qpid
+            project logo are trademarks of The Apache Software
+            Foundation; All other marks mentioned may be trademarks or
+            registered trademarks of their respective owners
+          </p>
+        </div>
+      </div>
+    </div>
+  </body>
+</html>

http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/book/pr01.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/book/pr01.html b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/pr01.html
new file mode 100644
index 0000000..fde0699
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/pr01.html
@@ -0,0 +1,149 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements.  See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership.  The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License.  You may obtain a copy of the License at
+ -
+ -   http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied.  See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+  <head>
+    <title>Introduction - Apache Qpid&#8482;</title>
+    <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+    <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+    <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+    <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+    <script type="text/javascript">var _deferredFunctions = [];</script>
+    <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+    <!--[if lte IE 8]>
+      <link rel="stylesheet" href="/ie.css" type="text/css"/>
+      <script type="text/javascript" src="/html5shiv.js"></script>
+    <![endif]-->
+
+    <!-- Redirects for `go get` and godoc.org -->
+    <meta name="go-import"
+          content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+    <meta name="go-source"
+          content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+  </head>
+  <body>
+    <div id="-content">
+      <div id="-top" class="panel">
+        <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+        <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+        <ul id="-global-navigation">
+          <li><a id="-logotype" href="/index.html">Apache Qpid<sup>&#8482;</sup></a></li>
+          <li><a href="/documentation.html">Documentation</a></li>
+          <li><a href="/download.html">Download</a></li>
+          <li><a href="/discussion.html">Discussion</a></li>
+        </ul>
+      </div>
+
+      <div id="-menu" class="panel" style="display: none;">
+        <div class="flex">
+          <section>
+            <h3>Project</h3>
+
+            <ul>
+              <li><a href="/overview.html">Overview</a></li>
+              <li><a href="/components/index.html">Components</a></li>
+              <li><a href="/releases/index.html">Releases</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Messaging APIs</h3>
+
+            <ul>
+              <li><a href="/proton/index.html">Qpid Proton</a></li>
+              <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+              <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Servers and tools</h3>
+
+            <ul>
+              <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+              <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+              <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Resources</h3>
+
+            <ul>
+              <li><a href="/dashboard.html">Dashboard</a></li>
+              <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+              <li><a href="/resources.html">More resources</a></li>
+            </ul>
+          </section>
+        </div>
+      </div>
+
+      <div id="-search" class="panel" style="display: none;">
+        <form action="http://www.google.com/search" method="get">
+          <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+          <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+          <button type="submit">Search</button>
+          <a href="/search.html">More ways to search</a>
+        </form>
+      </div>
+
+      <div id="-middle" class="panel">
+        <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li><a href="/releases/qpid-cpp-1.35.0/index.html">Qpid C++ 1.35.0</a></li><li><a href="/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html">AMQP Messaging Broker (Implemented in C++)</a></li><li>Introduction</li></ul>
+
+        <div id="-middle-content">
+          <div class="docbook"><div class="navheader"><table summary="Navigation header" width="100%"><tr><th align="center" colspan="3">Introduction</th></tr><tr><td align="left" width="20%"><a accesskey="p" href="index.html">Prev</a>&#160;</td><th align="center" width="60%">&#160;</th><td align="right" width="20%">&#160;<a accesskey="n" href="ch01.html">Next</a></td></tr></table><hr /></div><div class="preface"><div class="titlepage"><div><div><h1 class="title"><a id="idm140173359849712"></a>Introduction</h1></div></div></div><p>Qpid provides two AMQP messaging brokers:</p><div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem"><p>Implemented in C++ - high performance, low latency, and RDMA support.</p></li><li class="listitem"><p>Implemented in Java - Fully JMS compliant, runs on any Java platform.</p></li></ul></div><p>Both AMQP messaging brokers support clients in multiple
+    languages, as long as the messaging client and the messaging
+    broker use the same version of AMQP. See <a class="link" href="AMQP-Compatibility.html" title="1.9.&#160; AMQP compatibility">AMQP Compatibility</a> to see
+    which messaging clients work with each broker.</p><p>This manual contains information specific to the broker that is implemented in C++.</p></div><div class="navfooter"><hr /><table summary="Navigation footer" width="100%"><tr><td align="left" width="40%"><a accesskey="p" href="index.html">Prev</a>&#160;</td><td align="center" width="20%">&#160;</td><td align="right" width="40%">&#160;<a accesskey="n" href="ch01.html">Next</a></td></tr><tr><td align="left" valign="top" width="40%">AMQP Messaging Broker (Implemented in C++)&#160;</td><td align="center" width="20%"><a accesskey="h" href="index.html">Home</a></td><td align="right" valign="top" width="40%">&#160;Chapter&#160;1.&#160;
+      Running the AMQP Messaging Broker
+    </td></tr></table></div></div>
+
+          <hr/>
+
+          <ul id="-apache-navigation">
+            <li><a href="http://www.apache.org/">Apache</a></li>
+            <li><a href="http://www.apache.org/licenses/">License</a></li>
+            <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+            <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+            <li><a href="/security.html">Security</a></li>
+            <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+          </ul>
+
+          <p id="-legal">
+            Apache Qpid, Messaging built on AMQP; Copyright &#169; 2015
+            The Apache Software Foundation; Licensed under
+            the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+            License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+            Proton, Apache, the Apache feather logo, and the Apache Qpid
+            project logo are trademarks of The Apache Software
+            Foundation; All other marks mentioned may be trademarks or
+            registered trademarks of their respective owners
+          </p>
+        </div>
+      </div>
+    </div>
+  </body>
+</html>

http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/book/producer-flow-control.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/book/producer-flow-control.html b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/producer-flow-control.html
new file mode 100644
index 0000000..3494d99
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/producer-flow-control.html
@@ -0,0 +1,334 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements.  See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership.  The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License.  You may obtain a copy of the License at
+ -
+ -   http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied.  See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+  <head>
+    <title>producer-flow-control.html - Apache Qpid&#8482;</title>
+    <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+    <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+    <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+    <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+    <script type="text/javascript">var _deferredFunctions = [];</script>
+    <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+    <!--[if lte IE 8]>
+      <link rel="stylesheet" href="/ie.css" type="text/css"/>
+      <script type="text/javascript" src="/html5shiv.js"></script>
+    <![endif]-->
+
+    <!-- Redirects for `go get` and godoc.org -->
+    <meta name="go-import"
+          content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+    <meta name="go-source"
+          content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+  </head>
+  <body>
+    <div id="-content">
+      <div id="-top" class="panel">
+        <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+        <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+        <ul id="-global-navigation">
+          <li><a id="-logotype" href="/index.html">Apache Qpid<sup>&#8482;</sup></a></li>
+          <li><a href="/documentation.html">Documentation</a></li>
+          <li><a href="/download.html">Download</a></li>
+          <li><a href="/discussion.html">Discussion</a></li>
+        </ul>
+      </div>
+
+      <div id="-menu" class="panel" style="display: none;">
+        <div class="flex">
+          <section>
+            <h3>Project</h3>
+
+            <ul>
+              <li><a href="/overview.html">Overview</a></li>
+              <li><a href="/components/index.html">Components</a></li>
+              <li><a href="/releases/index.html">Releases</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Messaging APIs</h3>
+
+            <ul>
+              <li><a href="/proton/index.html">Qpid Proton</a></li>
+              <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+              <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Servers and tools</h3>
+
+            <ul>
+              <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+              <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+              <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Resources</h3>
+
+            <ul>
+              <li><a href="/dashboard.html">Dashboard</a></li>
+              <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+              <li><a href="/resources.html">More resources</a></li>
+            </ul>
+          </section>
+        </div>
+      </div>
+
+      <div id="-search" class="panel" style="display: none;">
+        <form action="http://www.google.com/search" method="get">
+          <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+          <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+          <button type="submit">Search</button>
+          <a href="/search.html">More ways to search</a>
+        </form>
+      </div>
+
+      <div id="-middle" class="panel">
+        <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li><a href="/releases/qpid-cpp-1.35.0/index.html">Qpid C++ 1.35.0</a></li><li><a href="/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html">AMQP Messaging Broker (Implemented in C++)</a></li><li>producer-flow-control.html</li></ul>
+
+        <div id="-middle-content">
+          <div class="docbook"><div class="navheader"><table summary="Navigation header" width="100%"><tr><th align="center" colspan="3">1.8.&#160;
+    Producer Flow Control
+  </th></tr><tr><td align="left" width="20%"><a accesskey="p" href="queue-state-replication.html">Prev</a>&#160;</td><th align="center" width="60%">Chapter&#160;1.&#160;
+      Running the AMQP Messaging Broker
+    </th><td align="right" width="20%">&#160;<a accesskey="n" href="AMQP-Compatibility.html">Next</a></td></tr></table><hr /></div><div class="section"><div class="titlepage"><div><div><h2 class="title"><a id="producer-flow-control"></a>1.8.&#160;
+    Producer Flow Control
+  </h2></div></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="producerflowcontrol-Overview"></a>1.8.1.&#160;
+      Overview
+    </h3></div></div></div><p>
+	As of release 0.10, the C++ broker supports the use of flow control to
+	throttle back message producers that are at risk of overflowing a
+	destination queue.
+      </p><p>
+        Each queue in the C++ broker has two threshold values associated with it:
+      </p><p>
+        Flow Stop Threshold: this is the level of queue resource
+        utilization above which flow control will be enabled.  Once this
+        threshold is crossed, the queue is considered in danger of overflow.
+      </p><p>
+        Flow Resume Threshold - this is the level of queue resource utilization
+        below which flow control will be disabled.  Once this threshold is
+        crossed, the queue is no longer considered in danger of overflow.
+      </p><p>
+        In the above description, queue resource utilization may be
+        defined as the total count of messages currently enqueued, or the total
+        sum of all message content in bytes.
+      </p><p>
+        The value for a queue's Flow Stop Threshold must be greater than or
+        equal to the value of the queue's Flow Resume Threshold.
+      </p><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="producerflowcontrol-QueueThresholdsExample"></a>1.8.1.1.&#160;
+	Example
+      </h4></div></div></div><p>
+        Let's consider a queue with a maximum limit set on the total number of
+        messages that may be enqueued to that queue.  Assume this maximum
+        message limit is 1000 messages.  Assume also that the user configures a
+        Flow Stop Threshold of 900 messages, and a Flow Resume Threshold of 500
+        messages.  Then the following holds:
+      </p><p>
+        The queue's initial flow control state is "OFF".
+      </p><p>
+        While the total number of enqueued messages is less than or equal to
+        900, the queue's flow control state remains "OFF".
+      </p><p>
+        When the total number of enqueued messages is greater than 900, the
+        queue's flow control state transitions to "ON".
+      </p><p>
+        When the queue's flow control state is "ON", it remains "ON" until the
+        total number of enqueued messages is less than 500.  At that point, the queue's
+        flow control state transitions to "OFF".
+      </p><p>
+        A similar example using total enqueued content bytes as the threshold
+        units are permitted.
+      </p></div><p>
+      Thresholds may be set using both total message counts and total byte
+      counts.  In this case, the following rules apply:
+    </p><p>
+      1) Flow control is "ON" when either stop threshold value is crossed.
+    </p><p>
+      2) Flow control remains "ON" until both resume thresholds are satisfied.
+    </p><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="producerflowcontro-MultiThresholdExample"></a>1.8.1.2.&#160;
+	Example
+      </h4></div></div></div><p>
+      Let's consider a queue with a maximum size limit of 10K bytes, and 5000
+      messages.  A user may assign a Flow Stop Threshold based on a total
+      message count of 4000 messages.  They may also assigne a Flow Stop
+      Threshold of 8K bytes.  The queue's flow control state transitions to
+      "ON" if either threshold is crossed: (total-msgs greater-than 4000 OR total-bytes
+      greater-than 8K).
+    </p><p>
+      Assume the user has assigned Flow Resume threshold's of 3000 messages and
+      6K bytes.  Then the queue's flow control will remain active until both
+      thresholds are satified: (total-msg less-than 3000 AND total-bytes less-than 6K).
+    </p></div><p>
+      The Broker enforces flow control by delaying the completion of the
+      Message.Transfer command that causes a message to be delivered to a queue
+      with active flow control.  The completion of the Message.Transfer command
+      is held off until flow control state transitions to "OFF" for all queues
+      that are a destination for that command.
+    </p><p>
+      A message producing client is permitted to have a finite number of
+      commands pending completion.  When the total number of these outstanding
+      commands reaches the limit, the client must not issue further commands
+      until one or more of the outstanding commands have completed.  This
+      window of outstanding commands is considered the sender's "capacity".
+      This allows any given producer to have a "capacity's" worth of messages
+      blocked due to flow control before the sender must stop sending further
+      messages.
+      </p><p>
+        This capacity window must be considered when determining a suitable
+        flow stop threshold for a given queue, as a producer may send its
+        capacity worth of messages _after_ a queue has reached the flow stop
+        threshold.  Therefore, a flow stop threshould should be set such that
+        the queue can accomodate more messages without overflowing.
+      </p><p>
+        For example, assume two clients, C1 and C2, are producing messages to
+        one particular destination queue.  Assume client C1 has a configured
+        capacity of 50 messages, and client C2's capacity is 15 messages.  In
+        this example, assume C1 and C2 are the only clients queuing messages to
+        a given queue.  If this queue has a Flow Stop Threshold of 100
+        messages, then, worst-case, the queue may receive up to 165 messages
+        before clients C1 and C2 are blocked from sending further messages.
+        This is due to the fact that the queue will enable flow control on
+        receipt of its 101'st message - preventing the completion of the
+        Message.Transfer command that carried the 101'st message.  However, C1
+        and C2 are allowed to have a total of 65 (50 for C1 and 15 for C2)
+        messages pending completion of Message.Transfer before they will stop
+        producing messages.  Thus, up to 65 messages may be enqueued beyond the
+        flow stop threshold before the producers will be blocked.
+      </p></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="producerflowcontrol-UserInterface"></a>1.8.2.&#160;
+        User Interface
+      </h3></div></div></div><p>
+        By default, the C++ broker assigns a queue's flow stop and flow resume
+        thresholds when the queue is created.  The C++ broker also allows the
+        user to manually specify the flow control thresholds on a per queue
+        basis.
+      </p><p>
+        However, queues that have been configured with a Limit Policy of type
+        RING or RING-STRICT do NOT have queue flow thresholds enabled by
+        default.  The nature of a RING queue defines its behavior when its
+        capacity is reach: replace the oldest message.
+      </p><p>
+        The flow control state of a queue can be determined by the "flowState"
+        boolean in the queue's QMF management object.  The queue's management
+        object also contains a counter that increments each time flow control
+        becomes active for the queue.
+      </p><p>
+        The broker applies a threshold ratio to compute a queue's default flow
+        control configuration.  These thresholds are expressed as a percentage
+        of a queue's maximum capacity.  There is one value for determining the
+        stop threshold, and another for determining the resume threshold.  The
+        user may configure these percentages using the following broker
+        configuration options:
+      </p><pre class="programlisting">
+        --default-flow-stop-threshold ("Queue capacity level at which flow control is activated.")
+        --default-flow-resume-threshold ("Queue capacity level at which flow control is de-activated.")
+      </pre><p>
+        For example:
+      </p><pre class="programlisting">
+        qpidd --default-flow-stop-threshold=90 --default-flow-resume-threshold=75
+      </pre><p>
+        Sets the default flow stop threshold to 90% of a queue's maximum
+        capacity and the flow resume threshold to 75% of the maximum capacity.
+        If a queue is created with a default-queue-limit of 10000 bytes, then
+        the default flow stop threshold would be 90% of 10000 = 9000 bytes and
+        the flow resume threshold would be 75% of 10000 = 7500.  The same
+        computation is performed should a queue be created with a maximum size
+        expressed as a message count instead of a byte count.
+      </p><p>
+        If not overridden by the user, the value of the
+        default-flow-stop-threshold is 80% and the value of the
+        default-flow-resume-threshold is 70%.
+      </p><p>
+        The user may disable default queue flow control broker-wide by
+        specifying the value 0 for both of these configuration options.  Note
+        that flow control may still be applied manually on a per-queue basis in
+        this case.
+      </p><p>
+        The user may manually set the flow thresholds when creating a queue.
+        The following options may be provided when adding a queue using the
+        <span class="command"><strong>qpid-config</strong></span> command line tool:
+      </p><pre class="programlisting">
+        --flow-stop-size=<em class="replaceable"><code>N</code></em>  Sets the queue's flow stop threshold to <em class="replaceable"><code>N</code></em> total bytes.
+        --flow-resume-size=<em class="replaceable"><code>N</code></em>  Sets the queue's flow resume threshold to <em class="replaceable"><code>N</code></em> total bytes.
+        --flow-stop-count=<em class="replaceable"><code>N</code></em> Sets the queue's flow stop threshold to <em class="replaceable"><code>N</code></em> total messages.
+        --flow-resume-count=<em class="replaceable"><code>N</code></em> Sets the queue's flow resume threshold to <em class="replaceable"><code>N</code></em> total messages.
+      </pre><p>
+        Flow thresholds may also be specified in the
+        <span class="command"><strong>queue.declare</strong></span> method, via the
+        <span class="command"><strong>arguments</strong></span> parameter map.  The following keys can be
+        provided in the arguments map for setting flow thresholds:
+      </p><div class="table"><a id="idm140173355457344"></a><p class="title"><strong>Table&#160;1.20.&#160;Queue Declare Method Flow Control Arguments</strong></p><div class="table-contents"><table border="1" summary="Queue Declare Method Flow Control Arguments"><colgroup><col /><col /></colgroup><thead><tr><th>Key</th><th>Value</th></tr></thead><tbody><tr><td>qpid.flow_stop_size</td><td>integer - queue's flow stop threshold value in bytes</td></tr><tr><td>qpid.flow_resume_size</td><td>integer - queue's flow resume threshold value in bytes</td></tr><tr><td>qpid.flow_stop_count</td><td>integer - queue's flow stop threshold value as a message count</td></tr><tr><td>qpid.flow_resume_count</td><td>integer - queue's flow resume threshold value as a message count</td></tr></tbody></table></div></div><br class="table-break" /><p>
+        The user may disable flow control on a per queue basis by setting
+        the flow-stop-size and flow-stop-count to zero for the queue.
+      </p><p>
+        The current state of flow control for a given queue can be
+        determined by the "flowStopped" statistic.  This statistic is
+        available in the queue's QMF management object. The value of
+        flowStopped is True when the queue's capacity has exceeded the
+        flow stop threshold.  The value of flowStopped is False when the
+        queue is no longer blocking due to flow control.
+      </p><p>
+        A queue will also track the number of times flow control has been
+        activated.  The "flowStoppedCount" statistic is incremented each time
+        the queue's capacity exceeds a flow stop threshold.  This statistic can
+        be used to monitor the activity of flow control for any given queue
+        over time.
+      </p><div class="table"><a id="idm140173358710048"></a><p class="title"><strong>Table&#160;1.21.&#160;Flow Control Statistics available in Queue's QMF Class</strong></p><div class="table-contents"><table border="1" summary="Flow Control Statistics available in Queue's QMF Class"><colgroup><col /><col /><col /></colgroup><thead><tr><th>Statistic Name</th><th>Type</th><th>Description</th></tr></thead><tbody><tr><td>flowStopped</td><td>Boolean</td><td>If true, producers are blocked by flow control.</td></tr><tr><td>flowStoppedCount</td><td>count32</td><td>Number of times flow control was activated for this queue</td></tr></tbody></table></div></div><br class="table-break" /></div></div><div class="navfooter"><hr /><table summary="Navigation footer" width="100%"><tr><td align="left" width="40%"><a accesskey="p" href="queue-state-replication.html">Prev</a>&#160;</td><td align="center" width="20%"><a accesskey="u" href="ch01.html">Up</a></td><td align="right" width="40%">&#160;<a acc
 esskey="n" href="AMQP-Compatibility.html">Next</a></td></tr><tr><td align="left" valign="top" width="40%">1.7.&#160;
+    Queue State Replication
+  &#160;</td><td align="center" width="20%"><a accesskey="h" href="index.html">Home</a></td><td align="right" valign="top" width="40%">&#160;1.9.&#160;
+      AMQP compatibility
+    </td></tr></table></div></div>
+
+          <hr/>
+
+          <ul id="-apache-navigation">
+            <li><a href="http://www.apache.org/">Apache</a></li>
+            <li><a href="http://www.apache.org/licenses/">License</a></li>
+            <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+            <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+            <li><a href="/security.html">Security</a></li>
+            <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+          </ul>
+
+          <p id="-legal">
+            Apache Qpid, Messaging built on AMQP; Copyright &#169; 2015
+            The Apache Software Foundation; Licensed under
+            the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+            License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+            Proton, Apache, the Apache feather logo, and the Apache Qpid
+            project logo are trademarks of The Apache Software
+            Foundation; All other marks mentioned may be trademarks or
+            registered trademarks of their respective owners
+          </p>
+        </div>
+      </div>
+    </div>
+  </body>
+</html>

http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/book/queue-state-replication.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/book/queue-state-replication.html b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/queue-state-replication.html
new file mode 100644
index 0000000..9a87e51
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/cpp-broker/book/queue-state-replication.html
@@ -0,0 +1,372 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements.  See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership.  The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License.  You may obtain a copy of the License at
+ -
+ -   http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied.  See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+  <head>
+    <title>queue-state-replication.html - Apache Qpid&#8482;</title>
+    <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+    <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+    <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+    <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+    <script type="text/javascript">var _deferredFunctions = [];</script>
+    <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+    <!--[if lte IE 8]>
+      <link rel="stylesheet" href="/ie.css" type="text/css"/>
+      <script type="text/javascript" src="/html5shiv.js"></script>
+    <![endif]-->
+
+    <!-- Redirects for `go get` and godoc.org -->
+    <meta name="go-import"
+          content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+    <meta name="go-source"
+          content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+  </head>
+  <body>
+    <div id="-content">
+      <div id="-top" class="panel">
+        <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+        <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+        <ul id="-global-navigation">
+          <li><a id="-logotype" href="/index.html">Apache Qpid<sup>&#8482;</sup></a></li>
+          <li><a href="/documentation.html">Documentation</a></li>
+          <li><a href="/download.html">Download</a></li>
+          <li><a href="/discussion.html">Discussion</a></li>
+        </ul>
+      </div>
+
+      <div id="-menu" class="panel" style="display: none;">
+        <div class="flex">
+          <section>
+            <h3>Project</h3>
+
+            <ul>
+              <li><a href="/overview.html">Overview</a></li>
+              <li><a href="/components/index.html">Components</a></li>
+              <li><a href="/releases/index.html">Releases</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Messaging APIs</h3>
+
+            <ul>
+              <li><a href="/proton/index.html">Qpid Proton</a></li>
+              <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+              <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Servers and tools</h3>
+
+            <ul>
+              <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+              <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+              <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Resources</h3>
+
+            <ul>
+              <li><a href="/dashboard.html">Dashboard</a></li>
+              <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+              <li><a href="/resources.html">More resources</a></li>
+            </ul>
+          </section>
+        </div>
+      </div>
+
+      <div id="-search" class="panel" style="display: none;">
+        <form action="http://www.google.com/search" method="get">
+          <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+          <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+          <button type="submit">Search</button>
+          <a href="/search.html">More ways to search</a>
+        </form>
+      </div>
+
+      <div id="-middle" class="panel">
+        <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li><a href="/releases/qpid-cpp-1.35.0/index.html">Qpid C++ 1.35.0</a></li><li><a href="/releases/qpid-cpp-1.35.0/cpp-broker/book/index.html">AMQP Messaging Broker (Implemented in C++)</a></li><li>queue-state-replication.html</li></ul>
+
+        <div id="-middle-content">
+          <div class="docbook"><div class="navheader"><table summary="Navigation header" width="100%"><tr><th align="center" colspan="3">1.7.&#160;
+    Queue State Replication
+  </th></tr><tr><td align="left" width="20%"><a accesskey="p" href="ch01s06.html">Prev</a>&#160;</td><th align="center" width="60%">Chapter&#160;1.&#160;
+      Running the AMQP Messaging Broker
+    </th><td align="right" width="20%">&#160;<a accesskey="n" href="producer-flow-control.html">Next</a></td></tr></table><hr /></div><div class="section"><div class="titlepage"><div><div><h2 class="title"><a id="queue-state-replication"></a>1.7.&#160;
+    Queue State Replication
+  </h2></div></div></div><div class="section"><div class="titlepage"><div><div><h3 class="title"><a id="queuestatereplication-AsynchronousReplicationofQueueState"></a>1.7.1.&#160;
+      Asynchronous
+      Replication of Queue State
+    </h3></div></div></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-Overview"></a>1.7.1.1.&#160;
+	Overview
+      </h4></div></div></div><p>
+	There is support in qpidd for selective asynchronous replication
+	of queue state. This is achieved by:
+      </p><p>
+	(a) enabling event generation for the queues in question
+      </p><p>
+	(b) loading a plugin on the 'source' broker to encode those
+	events as messages on a replication queue (this plugin is
+	called
+	replicating_listener.so)
+      </p><p>
+	(c) loading a custom exchange plugin on the 'backup' broker (this
+	plugin is called replication_exchange.so)
+      </p><p>
+	(d) creating an instance of the replication exchange type on the
+	backup broker
+      </p><p>
+	(e) establishing a federation bridge between the replication
+	queue on the source broker and the replication exchange on the
+	backup broker
+      </p><p>
+	The bridge established between the source and backup brokers for
+	replication (step (e) above) should have acknowledgements turned
+	on (this may be done through the --ack N option to qpid-route).
+	This ensures that replication events are not lost if the bridge
+	fails.
+      </p><p>
+	The replication protocol will also eliminate duplicates to ensure
+	reliably replicated state. Note though that only one bridge per
+	replication exchange is supported. If clients try to publish to
+	the replication exchange or if more than a the single required
+	bridge from the replication queue on the source broker is
+	created, replication will be corrupted. (Access control may be
+	used to restrict access and help prevent this).
+      </p><p>
+	The replicating event listener plugin (step (b) above) has the
+	following options:
+      </p><pre class="programlisting">
+Queue Replication Options:
+  --replication-queue QUEUE                      Queue on which events for
+                                                 other queues are recorded
+  --replication-listener-name NAME (replicator)  name by which to register the
+                                                 replicating event listener
+  --create-replication-queue                     if set, the replication will
+                                                 be created if it does not
+                                                 exist
+      </pre><p>
+	The name of the queue is required. It can either point to a
+	durable queue whose definition has been previously recorded, or
+	the --create-replication-queue option can be specified in which
+	case the queue will be created a simple non-durable queue if it
+	does not already exist.
+      </p></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-UsewithClustering"></a>1.7.1.2.&#160;
+	Use with
+	Clustering
+      </h4></div></div></div><p>
+	The source and/or backup brokers may also be clustered brokers.
+	In this case the federated bridge will be re-established between
+	replicas should either of the originally connected nodes fail.
+	There are however the following limitations at present:
+      </p><div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem"><p>The backup site does not process membership updates after it
+	  establishes the first connection. In order for newly added
+	  members on a source cluster to be eligible as failover targets,
+	  the bridge must be recreated after those members have been added
+	  to the source cluster.
+	  </p></li></ul></div><div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem"><p>New members added to a backup cluster will not receive
+	  information about currently established bridges. Therefore in
+	  order to allow the bridge to be re-established from these members
+	  in the event of failure of older nodes, the bridge must be
+	  recreated after the new members have joined.
+	  </p></li></ul></div><div class="itemizedlist"><ul class="itemizedlist" type="disc"><li class="listitem"><p>Only a single URL can be passed to create the initial link
+	  from backup site to the primary site. this means that at the time
+	  of creating the initial connection the initial node in the
+	  primary site to which the connection is made needs to be running.
+	  Once connected the backup site will receive a membership update
+	  of all the nodes in the primary site, and if the initial
+	  connection node in the primary fails, the link will be
+	  re-established on the next node that was started (time) on the
+	  primary site.
+	  </p></li></ul></div><p>
+	Due to the acknowledged transfer of events over the bridge (see
+	note above) manual recreation of the bridge and automatic
+	re-establishment of te bridge after connection failure (including
+	failover where either or both ends are clustered brokers) will
+	not result in event loss.
+      </p></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-OperationsonBackupQueues"></a>1.7.1.3.&#160;
+	Operations
+	on Backup Queues
+      </h4></div></div></div><p>
+	When replicating the state of a queue to a backup broker it is
+	important to recognise that any other operations performed
+	directly on the backup queue may break the replication.
+      </p><p>
+	If the backup queue is to be an active (i.e. accessed by clients
+	while replication is on) only enqueues should be selected
+	for
+	replication. In this mode, any message enqueued on the source
+	brokers copy of the queue will also be enqueued on the backup
+	brokers copy. However not attempt will be made to remove messages
+	from the backup queue in response to removal of messages from the
+	source queue.
+      </p></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-SelectingQueuesforReplication"></a>1.7.1.4.&#160;
+	Selecting
+	Queues for Replication
+      </h4></div></div></div><p>
+	Queues are selected for replication by specifying the types of
+	events they should generate (it is from these events that the
+	replicating plugin constructs messages which are then pulled and
+	processed by the backup site). This is done through options
+	passed to the initial queue-declare command that creates the
+	queue and may be done either through qpid-config or similar
+	tools, or by the application.
+      </p><p>
+	With qpid-config, the --generate-queue-events options is used:
+      </p><pre class="programlisting">
+    --generate-queue-events N
+                         If set to 1, every enqueue will generate an event that can be processed by
+                         registered listeners (e.g. for replication). If set to 2, events will be
+                         generated for enqueues and dequeues
+      </pre><p>
+	From an application, the arguments field of the queue-declare
+	AMQP command is used to convey this information. An entry should
+	be added to the map with key 'qpid.queue_event_generation' and an
+	integer value of 1 (to replicate only enqueue events) or 2 (to
+	replicate both enqueue and dequeue events).
+      </p><p>
+	Applications written using the c++ client API may fine the
+	qpid::client::QueueOptions class convenient. This has a
+	enableQueueEvents() method on it that can be used to set the
+	option (the instance of QueueOptions is then passed as the value
+	of the arguments field in the queue-declare command. The boolean
+	option to that method should be set to true if only enequeue
+	events should be replicated; by default it is false meaning that
+	both enqueues and dequeues will be replicated. E.g.
+      </p><pre class="programlisting">
+    QueueOptions options;
+    options.enableQueueEvents(false);
+    session.queueDeclare(arg::queue="my-queue", arg::arguments=options);
+      </pre></div><div class="section"><div class="titlepage"><div><div><h4 class="title"><a id="queuestatereplication-Example"></a>1.7.1.5.&#160;
+	Example
+      </h4></div></div></div><p>
+	Lets assume we will run the primary broker on host1 and the
+	backup on host2, have installed qpidd on both and have the
+	replicating_listener and replication_exchange plugins in qpidd's
+	module directory(*1).
+      </p><p>
+	On host1 we start the source broker and specifcy that a queue
+	called 'replication' should be used for storing the events until
+	consumed by the backup. We also request that this queue be
+	created (as transient) if not already specified:
+      </p><pre class="programlisting">
+    qpidd --replication-queue replication-queue --create-replication-queue true --log-enable info+
+      </pre><p>
+	On host2 we start up the backup broker ensuring that the
+	replication exchange module is loaded:
+      </p><pre class="programlisting">
+    qpidd
+      </pre><p>
+	We can then create the instance of that replication exchange that
+	we will use to process the events:
+      </p><pre class="programlisting">
+    qpid-config -a host2 add exchange replication replication-exchange
+      </pre><p>
+	If this fails with the message "Exchange type not implemented:
+	replication", it means the replication exchange module was
+	not
+	loaded. Check that the module is installed on your system and if
+	necessary provide the full path to the library.
+      </p><p>
+	We then connect the replication queue on the source broker with
+	the replication exchange on the backup broker using the
+	qpid-route command:
+      </p><pre class="programlisting">
+    qpid-route --ack 50 queue add host2 host1 replication-exchange replication-queue
+</pre><p>
+            The example above configures the bridge to acknowledge messages
+            in batches of 50.
+          </p><p>
+            Now create two queues (on both source and backup brokers), one
+            replicating both enqueues and dequeues (queue-a) and the
+            other
+            replicating only dequeues (queue-b):
+          </p><pre class="programlisting">
+    qpid-config -a host1 add queue queue-a --generate-queue-events 2
+    qpid-config -a host1 add queue queue-b --generate-queue-events 1
+
+    qpid-config -a host2 add queue queue-a
+    qpid-config -a host2 add queue queue-b
+	    </pre><p>
+	      We are now ready to use the queues and see the replication.
+	    </p><p>
+	      Any message enqueued on queue-a will be replicated to the backup
+	      broker. When the message is acknowledged by a client connected to
+	      host1 (and thus dequeued), that message will be removed from the
+	      copy of the queue on host2. The state of queue-a on host2 will
+	      thus mirror that of the equivalent queue on host1, albeit with a
+	      small lag. (Note
+	      however that we must not have clients connected to host2 publish
+	      to-or consume from- queue-a or the state will fail to replicate
+	      correctly due to conflicts).
+	    </p><p>
+	      Any message enqueued on queue-b on host1 will also be enqueued on
+	      the equivalent queue on host2. However the acknowledgement and
+	      consequent dequeuing of messages from queue-b on host1 will have
+	      no effect on the state of queue-b on host2.
+	    </p><p>
+	      (*1) If not the paths in the above may need to be modified. E.g.
+	      if using modules built from a qpid svn checkout, the following
+	      would be added to the command line used to start qpidd on host1:
+	    </p><pre class="programlisting">
+    --load-module &lt;path-to-qpid-dir&gt;/src/.libs/replicating_listener.so
+	    </pre><p>
+	      and the following for the equivalent command line on host2:
+	    </p><pre class="programlisting">
+    --load-module &lt;path-to-qpid-dir&gt;/src/.libs/replication_exchange.so
+	    </pre></div></div></div><div class="navfooter"><hr /><table summary="Navigation footer" width="100%"><tr><td align="left" width="40%"><a accesskey="p" href="ch01s06.html">Prev</a>&#160;</td><td align="center" width="20%"><a accesskey="u" href="ch01.html">Up</a></td><td align="right" width="40%">&#160;<a accesskey="n" href="producer-flow-control.html">Next</a></td></tr><tr><td align="left" valign="top" width="40%">1.6.&#160;LVQ - Last Value Queue&#160;</td><td align="center" width="20%"><a accesskey="h" href="index.html">Home</a></td><td align="right" valign="top" width="40%">&#160;1.8.&#160;
+    Producer Flow Control
+  </td></tr></table></div></div>
+
+          <hr/>
+
+          <ul id="-apache-navigation">
+            <li><a href="http://www.apache.org/">Apache</a></li>
+            <li><a href="http://www.apache.org/licenses/">License</a></li>
+            <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+            <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+            <li><a href="/security.html">Security</a></li>
+            <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+          </ul>
+
+          <p id="-legal">
+            Apache Qpid, Messaging built on AMQP; Copyright &#169; 2015
+            The Apache Software Foundation; Licensed under
+            the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+            License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+            Proton, Apache, the Apache feather logo, and the Apache Qpid
+            project logo are trademarks of The Apache Software
+            Foundation; All other marks mentioned may be trademarks or
+            registered trademarks of their respective owners
+          </p>
+        </div>
+      </div>
+    </div>
+  </body>
+</html>

http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/cpp-broker/cpp-broker-book.pdf
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/cpp-broker/cpp-broker-book.pdf b/content/releases/qpid-cpp-1.35.0/cpp-broker/cpp-broker-book.pdf
new file mode 100755
index 0000000..50f781b
Binary files /dev/null and b/content/releases/qpid-cpp-1.35.0/cpp-broker/cpp-broker-book.pdf differ

http://git-wip-us.apache.org/repos/asf/qpid-site/blob/eff0fe55/content/releases/qpid-cpp-1.35.0/index.html
----------------------------------------------------------------------
diff --git a/content/releases/qpid-cpp-1.35.0/index.html b/content/releases/qpid-cpp-1.35.0/index.html
new file mode 100644
index 0000000..09286d4
--- /dev/null
+++ b/content/releases/qpid-cpp-1.35.0/index.html
@@ -0,0 +1,230 @@
+<!DOCTYPE html>
+<!--
+ -
+ - Licensed to the Apache Software Foundation (ASF) under one
+ - or more contributor license agreements.  See the NOTICE file
+ - distributed with this work for additional information
+ - regarding copyright ownership.  The ASF licenses this file
+ - to you under the Apache License, Version 2.0 (the
+ - "License"); you may not use this file except in compliance
+ - with the License.  You may obtain a copy of the License at
+ -
+ -   http://www.apache.org/licenses/LICENSE-2.0
+ -
+ - Unless required by applicable law or agreed to in writing,
+ - software distributed under the License is distributed on an
+ - "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ - KIND, either express or implied.  See the License for the
+ - specific language governing permissions and limitations
+ - under the License.
+ -
+-->
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+  <head>
+    <title>Qpid C++ 1.35.0 - Apache Qpid&#8482;</title>
+    <meta http-equiv="X-UA-Compatible" content="IE=edge"/>
+    <meta name="viewport" content="width=device-width, initial-scale=1.0"/>
+    <link rel="stylesheet" href="/site.css" type="text/css" async="async"/>
+    <link rel="stylesheet" href="/deferred.css" type="text/css" defer="defer"/>
+    <script type="text/javascript">var _deferredFunctions = [];</script>
+    <script type="text/javascript" src="/deferred.js" defer="defer"></script>
+    <!--[if lte IE 8]>
+      <link rel="stylesheet" href="/ie.css" type="text/css"/>
+      <script type="text/javascript" src="/html5shiv.js"></script>
+    <![endif]-->
+
+    <!-- Redirects for `go get` and godoc.org -->
+    <meta name="go-import"
+          content="qpid.apache.org git https://git-wip-us.apache.org/repos/asf/qpid-proton.git"/>
+    <meta name="go-source"
+          content="qpid.apache.org
+https://github.com/apache/qpid-proton/blob/go1/README.md
+https://github.com/apache/qpid-proton/tree/go1{/dir}
+https://github.com/apache/qpid-proton/blob/go1{/dir}/{file}#L{line}"/>
+  </head>
+  <body>
+    <div id="-content">
+      <div id="-top" class="panel">
+        <a id="-menu-link"><img width="16" height="16" src="" alt="Menu"/></a>
+
+        <a id="-search-link"><img width="22" height="16" src="" alt="Search"/></a>
+
+        <ul id="-global-navigation">
+          <li><a id="-logotype" href="/index.html">Apache Qpid<sup>&#8482;</sup></a></li>
+          <li><a href="/documentation.html">Documentation</a></li>
+          <li><a href="/download.html">Download</a></li>
+          <li><a href="/discussion.html">Discussion</a></li>
+        </ul>
+      </div>
+
+      <div id="-menu" class="panel" style="display: none;">
+        <div class="flex">
+          <section>
+            <h3>Project</h3>
+
+            <ul>
+              <li><a href="/overview.html">Overview</a></li>
+              <li><a href="/components/index.html">Components</a></li>
+              <li><a href="/releases/index.html">Releases</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Messaging APIs</h3>
+
+            <ul>
+              <li><a href="/proton/index.html">Qpid Proton</a></li>
+              <li><a href="/components/jms/index.html">Qpid JMS</a></li>
+              <li><a href="/components/messaging-api/index.html">Qpid Messaging API</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Servers and tools</h3>
+
+            <ul>
+              <li><a href="/components/java-broker/index.html">Broker for Java</a></li>
+              <li><a href="/components/cpp-broker/index.html">C++ broker</a></li>
+              <li><a href="/components/dispatch-router/index.html">Dispatch router</a></li>
+            </ul>
+          </section>
+
+          <section>
+            <h3>Resources</h3>
+
+            <ul>
+              <li><a href="/dashboard.html">Dashboard</a></li>
+              <li><a href="https://cwiki.apache.org/confluence/display/qpid/Index">Wiki</a></li>
+              <li><a href="/resources.html">More resources</a></li>
+            </ul>
+          </section>
+        </div>
+      </div>
+
+      <div id="-search" class="panel" style="display: none;">
+        <form action="http://www.google.com/search" method="get">
+          <input type="hidden" name="sitesearch" value="qpid.apache.org"/>
+          <input type="text" name="q" maxlength="255" autofocus="autofocus" tabindex="1"/>
+          <button type="submit">Search</button>
+          <a href="/search.html">More ways to search</a>
+        </form>
+      </div>
+
+      <div id="-middle" class="panel">
+        <ul id="-path-navigation"><li><a href="/index.html">Home</a></li><li><a href="/releases/index.html">Releases</a></li><li>Qpid C++ 1.35.0</li></ul>
+
+        <div id="-middle-content">
+          <h1 id="qpid-c-1350">Qpid C++ 1.35.0</h1>
+
+<p>Qpid C++ offers a connection-oriented messaging API and a message
+broker written in C++ that stores, routes, and forwards messages using
+AMQP. More about <a href="/index.html">Qpid</a>.</p>
+
+<p>For a detailed list of the changes in this release, see the <a href="release-notes.html">release
+notes</a>.</p>
+
+<p>It's important to <a href="/download.html#verify-what-you-download">verify the
+integrity</a> of the
+files you download.</p>
+
+<h2 id="source-archives">Source archives</h2>
+
+<table>
+<thead>
+<tr>
+  <th>Content</th>
+  <th>Download</th>
+  <th>Verify</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+  <td>C++ broker, Qpid Messaging API (C++)</td>
+  <td><a href="http://archive.apache.org/dist/qpid/cpp/1.35.0/qpid-cpp-1.35.0.tar.gz">qpid-cpp-1.35.0.tar.gz</a></td>
+  <td><a href="http://archive.apache.org/dist/qpid/cpp/1.35.0/qpid-cpp-1.35.0.tar.gz.asc">ASC</a>, <a href="http://archive.apache.org/dist/qpid/cpp/1.35.0/qpid-cpp-1.35.0.tar.gz.md5">MD5</a>, <a href="http://archive.apache.org/dist/qpid/cpp/1.35.0/qpid-cpp-1.35.0.tar.gz.sha1">SHA1</a></td>
+</tr>
+</tbody>
+</table>
+
+<h2 id="components">Components</h2>
+
+<table>
+<thead>
+<tr>
+  <th>Component</th>
+  <th>Languages</th>
+  <th>Platforms</th>
+  <th>AMQP versions</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+  <td><a href="/components/cpp-broker/index.html">C++ broker</a></td>
+  <td>C++</td>
+  <td>Linux, Windows</td>
+  <td>1.0, 0-10</td>
+</tr>
+<tr>
+  <td><a href="/components/messaging-api/index.html">Qpid Messaging API</a></td>
+  <td>C++</td>
+  <td>Linux, Windows</td>
+  <td>1.0, 0-10</td>
+</tr>
+</tbody>
+</table>
+
+<h2 id="documentation">Documentation</h2>
+
+<div class="two-column">
+
+<ul>
+<li><a href="https://git-wip-us.apache.org/repos/asf?p=qpid-cpp.git;a=blob_plain;f=INSTALL.txt;hb=HEAD">Installing Qpid C++</a></li>
+<li><a href="cpp-broker/book/index.html">C++ broker book</a> (<a href="cpp-broker/cpp-broker-book.pdf">PDF</a>)</li>
+<li><a href="messaging-api/cpp/api/index.html">C++ API reference</a></li>
+<li><a href="messaging-api/cpp/examples/index.html">C++ examples</a></li>
+</ul>
+
+</div>
+
+<h2 id="more-information">More information</h2>
+
+<ul>
+<li><a href="https://issues.apache.org/jira/issues/?jql=project+%3D+QPID+AND+fixVersion+%3D+%27qpid-cpp-1.35.0%27+AND+resolution+%3D+%27fixed%27+ORDER+BY+priority+DESC">Resolved issues in JIRA</a></li>
+<li><a href="http://svn.apache.org/repos/asf/qpid/tags/qpid-cpp-1.35.0">Source repository tag</a></li>
+</ul>
+
+<script type="text/javascript">
+  _deferredFunctions.push(function() {
+      if ("1.35.0" === "1.35.0") {
+          _modifyCurrentReleaseLinks();
+      }
+  });
+</script>
+
+
+          <hr/>
+
+          <ul id="-apache-navigation">
+            <li><a href="http://www.apache.org/">Apache</a></li>
+            <li><a href="http://www.apache.org/licenses/">License</a></li>
+            <li><a href="http://www.apache.org/foundation/sponsorship.html">Sponsorship</a></li>
+            <li><a href="http://www.apache.org/foundation/thanks.html">Thanks!</a></li>
+            <li><a href="/security.html">Security</a></li>
+            <li><a href="http://www.apache.org/"><img id="-apache-feather" width="48" height="14" src="" alt="Apache"/></a></li>
+          </ul>
+
+          <p id="-legal">
+            Apache Qpid, Messaging built on AMQP; Copyright &#169; 2015
+            The Apache Software Foundation; Licensed under
+            the <a href="http://www.apache.org/licenses/LICENSE-2.0">Apache
+            License, Version 2.0</a>; Apache Qpid, Qpid, Qpid Proton,
+            Proton, Apache, the Apache feather logo, and the Apache Qpid
+            project logo are trademarks of The Apache Software
+            Foundation; All other marks mentioned may be trademarks or
+            registered trademarks of their respective owners
+          </p>
+        </div>
+      </div>
+    </div>
+  </body>
+</html>


---------------------------------------------------------------------
To unsubscribe, e-mail: commits-unsubscribe@qpid.apache.org
For additional commands, e-mail: commits-help@qpid.apache.org


Mime
View raw message