predictionio-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Jim Miller <jemiller1...@gmail.com>
Subject Re: Unable to connect to all storage backends successfully
Date Mon, 02 Oct 2017 18:59:17 GMT
Hi Guys,

The template that I am using is*
incubator-predictionio-template-recommender.*

Thanks,

Jim

On Wed, Sep 27, 2017 at 3:49 PM, Jim Miller <jemiller1963@gmail.com> wrote:

> incubator-predictionio-template-recommender
>
>
> On Wed, Sep 27, 2017 at 2:25 PM, Donald Szeto <donald@apache.org> wrote:
>
>> What template and version are you using?
>>
>> On Tue, Sep 26, 2017 at 9:28 PM Jim Miller <jemiller1963@gmail.com>
>> wrote:
>>
>>> Hi guys,
>>>
>>> I have another error that I cannot get past:
>>>
>>> *vagrant:MyRecommendation/ (develop*) $ pio train
>>>
>>>
>>>  [21:47:39]*
>>> *[ERROR] [Console$] unable to read engine factory from
>>> /home/vagrant/MyRecommendation/engine.json. Aborting.*
>>>
>>>
>>> Does anyone have any advice?
>>>
>>> Thanks,
>>>
>>> Jim
>>>
>>> --
>>> Jim Miller
>>>
>>> On September 26, 2017 at 7:42:02 PM, Jim Miller (jemiller1963@gmail.com)
>>> wrote:
>>>
>>> Shinsuke, you rock!  That was it.
>>>
>>> Thank you so much,
>>>
>>> Jim
>>>
>>> --
>>> Jim Miller
>>>
>>> On September 24, 2017 at 7:29:28 PM, Shinsuke Sugaya (
>>> shinsuke.sugaya@gmail.com) wrote:
>>>
>>> Hi,
>>>
>>> > PIO_STORAGE_SOURCES_ELASTICSEARCH_PORTS=9300
>>>
>>> Elasticsearch 5 uses 9200 port.
>>> Could you try 9200 port?
>>>
>>> Thanks,
>>> shinsuke
>>>
>>>
>>> 2017-09-24 3:02 GMT+09:00 Jim Miller <jemiller1963@gmail.com>:
>>> > Hi Donald,
>>> >
>>> > Tried just now and received the following error:
>>> >
>>> > vagrant:~/ $ pio status
>>> > [13:34:52]
>>> > [INFO] [Management$] Inspecting PredictionIO...
>>> > [INFO] [Management$] PredictionIO 0.12.0-incubating is installed at
>>> > /home/vagrant/pio/PredictionIO-0.12.0-incubating
>>> > [INFO] [Management$] Inspecting Apache Spark...
>>> > [INFO] [Management$] Apache Spark is installed at
>>> > /home/vagrant/pio/PredictionIO-0.12.0-incubating/vendors/
>>> spark-2.1.1-bin-hadoop2.7
>>> > [INFO] [Management$] Apache Spark 2.1.1 detected (meets minimum
>>> requirement
>>> > of 1.3.0)
>>> > [INFO] [Management$] Inspecting storage backend connections...
>>> > [INFO] [Storage$] Verifying Meta Data Backend (Source:
>>> ELASTICSEARCH)...
>>> > [ERROR] [Management$] Unable to connect to all storage backends
>>> > successfully.
>>> > The following shows the error message from the storage backend.
>>> >
>>> > error while performing request (java.lang.RuntimeException)
>>> >
>>> > Dumping configuration of initialized storage backend sources.
>>> > Please make sure they are correct.
>>> >
>>> > Source Name: ELASTICSEARCH; Type: elasticsearch; Configuration: HOME ->
>>> > /home/vagrant/pio/PredictionIO-0.12.0-incubating/vendors/ela
>>> sticsearch-5.5.2,
>>> > HOSTS -> localhost, PORTS -> 9300, CLUSTERNAME -> firstCluster,
TYPE ->
>>> > elastic search
>>> >
>>> >
>>> > HERE IS MY PIO-ENV.SH
>>> >
>>> > # PredictionIO Main Configuration
>>> > #
>>> > # This section controls core behavior of PredictionIO. It is very
>>> likely
>>> > that
>>> > # you need to change these to fit your site.
>>> >
>>> > # SPARK_HOME: Apache Spark is a hard dependency and must be configured.
>>> > # SPARK_HOME=$PIO_HOME/vendors/spark-2.0.2-bin-hadoop2.7
>>> > SPARK_HOME=$PIO_HOME/vendors/spark-2.1.1-bin-hadoop2.7
>>> >
>>> > POSTGRES_JDBC_DRIVER=$PIO_HOME/lib/postgresql-42.0.0.jar
>>> > MYSQL_JDBC_DRIVER=$PIO_HOME/lib/mysql-connector-java-5.1.41.jar
>>> >
>>> > # ES_CONF_DIR: You must configure this if you have advanced
>>> configuration
>>> > for
>>> > # your Elasticsearch setup.
>>> > ES_CONF_DIR=$PIO_HOME/vendors/elasticsearch-5.5.2
>>> > # HADOOP_CONF_DIR=/opt/hadoop
>>> >
>>> > # HBASE_CONF_DIR: You must configure this if you intend to run
>>> PredictionIO
>>> > # with HBase on a remote cluster.
>>> > HBASE_CONF_DIR=$PIO_HOME/hbase-1.3.1/conf
>>> >
>>> > # Filesystem paths where PredictionIO uses as block storage.
>>> > PIO_FS_BASEDIR=$HOME/.pio_store
>>> > PIO_FS_ENGINESDIR=$PIO_FS_BASEDIR/engines
>>> > PIO_FS_TMPDIR=$PIO_FS_BASEDIR/tmp
>>> >
>>> > # PredictionIO Storage Configuration
>>> > #
>>> > # This section controls programs that make use of PredictionIO's
>>> built-in
>>> > # storage facilities. Default values are shown below.
>>> > #
>>> > # For more information on storage configuration please refer to
>>> > # http://predictionio.incubator.apache.org/system/anotherdatastore/
>>> >
>>> > # Storage Repositories
>>> >
>>> > # Default is to use PostgreSQL
>>> > PIO_STORAGE_REPOSITORIES_METADATA_NAME=pio_meta
>>> > PIO_STORAGE_REPOSITORIES_METADATA_SOURCE=ELASTICSEARCH
>>> >
>>> > PIO_STORAGE_REPOSITORIES_EVENTDATA_NAME=pio_event
>>> > PIO_STORAGE_REPOSITORIES_EVENTDATA_SOURCE=HBASE
>>> >
>>> > PIO_STORAGE_REPOSITORIES_MODELDATA_NAME=pio_model
>>> > PIO_STORAGE_REPOSITORIES_MODELDATA_SOURCE=LOCALFS
>>> >
>>> > # Storage Data Sources
>>> >
>>> > # PostgreSQL Default Settings
>>> > # Please change "pio" to your database name in
>>> PIO_STORAGE_SOURCES_PGSQL_URL
>>> > # Please change PIO_STORAGE_SOURCES_PGSQL_USERNAME and
>>> > # PIO_STORAGE_SOURCES_PGSQL_PASSWORD accordingly
>>> > # PIO_STORAGE_SOURCES_PGSQL_TYPE=jdbc
>>> > # PIO_STORAGE_SOURCES_PGSQL_URL=jdbc:postgresql://localhost/pio
>>> > # PIO_STORAGE_SOURCES_PGSQL_USERNAME=pio
>>> > # PIO_STORAGE_SOURCES_PGSQL_PASSWORD=pio
>>> >
>>> > # MySQL Example
>>> > # PIO_STORAGE_SOURCES_MYSQL_TYPE=jdbc
>>> > # PIO_STORAGE_SOURCES_MYSQL_URL=jdbc:mysql://localhost/pio
>>> > # PIO_STORAGE_SOURCES_MYSQL_USERNAME=pio
>>> > # PIO_STORAGE_SOURCES_MYSQL_PASSWORD=pio
>>> >
>>> > # Elasticsearch Example
>>> > # PIO_STORAGE_SOURCES_ELASTICSEARCH_TYPE=elasticsearch
>>> > # PIO_STORAGE_SOURCES_ELASTICSEARCH_HOSTS=localhost
>>> > # PIO_STORAGE_SOURCES_ELASTICSEARCH_PORTS=9200
>>> > # PIO_STORAGE_SOURCES_ELASTICSEARCH_SCHEMES=http
>>> > #
>>> > PIO_STORAGE_SOURCES_ELASTICSEARCH_HOME=$PIO_HOME/vendors/
>>> elasticsearch-5.5.2
>>> > # Optional basic HTTP auth
>>> > # PIO_STORAGE_SOURCES_ELASTICSEARCH_USERNAME=my-name
>>> > # PIO_STORAGE_SOURCES_ELASTICSEARCH_PASSWORD=my-secret
>>> > # Elasticsearch 1.x Example
>>> > PIO_STORAGE_SOURCES_ELASTICSEARCH_TYPE=elasticsearch
>>> > PIO_STORAGE_SOURCES_ELASTICSEARCH_CLUSTERNAME=firstCluster
>>> > PIO_STORAGE_SOURCES_ELASTICSEARCH_HOSTS=localhost
>>> > PIO_STORAGE_SOURCES_ELASTICSEARCH_PORTS=9300
>>> > PIO_STORAGE_SOURCES_ELASTICSEARCH_HOME=$PIO_HOME/vendors/
>>> elasticsearch-5.5.2
>>> >
>>> > # Local File System Example
>>> > PIO_STORAGE_SOURCES_LOCALFS_TYPE=localfs
>>> > PIO_STORAGE_SOURCES_LOCALFS_PATH=$PIO_FS_BASEDIR/models
>>> >
>>> > # HBase Example
>>> > PIO_STORAGE_SOURCES_HBASE_TYPE=hbase
>>> > PIO_STORAGE_SOURCES_HBASE_HOME=$PIO_HOME/vendors/hbase-1.3.1
>>> >
>>> > # AWS S3 Example
>>> > # PIO_STORAGE_SOURCES_S3_TYPE=s3
>>> > # PIO_STORAGE_SOURCES_S3_BUCKET_NAME=pio_bucket
>>> > # PIO_STORAGE_SOURCES_S3_BASE_PATH=pio_model
>>> >
>>> >
>>> > ELASTICSEARCH.YML
>>> >
>>> > #======================== Elasticsearch Configuration
>>> > =========================
>>> > #
>>> > # NOTE: Elasticsearch comes with reasonable defaults for most settings.
>>> > # Before you set out to tweak and tune the configuration, make sure
>>> > you
>>> > # understand what are you trying to accomplish and the consequences.
>>> > #
>>> > # The primary way of configuring a node is via this file. This template
>>> > lists
>>> > # the most important settings you may want to configure for a
>>> production
>>> > cluster.
>>> > #
>>> > # Please consult the documentation for further information on
>>> configuration
>>> > options:
>>> > # https://www.elastic.co/guide/en/elasticsearch/reference/index.html
>>> > #
>>> > # ---------------------------------- Cluster
>>> > -----------------------------------
>>> > #
>>> > # Use a descriptive name for your cluster:
>>> > #
>>> > cluster.name: firstCluster
>>> > #
>>> > # ------------------------------------ Node
>>> > ------------------------------------
>>> > #
>>> > # Use a descriptive name for the node:
>>> > #
>>> > #node.name: node-1
>>> > #
>>> > # Add custom attributes to the node:
>>> > #
>>> > #node.attr.rack: r1
>>> > #
>>> > # ----------------------------------- Paths
>>> > ------------------------------------
>>> > #
>>> > # Path to directory where to store the data (separate multiple
>>> locations by
>>> > comma):
>>> > #
>>> > #path.data: /path/to/data
>>> > #
>>> > # Path to log files:
>>> > #
>>> > #path.logs: /path/to/logs
>>> > #
>>> > # ----------------------------------- Memory
>>> > -----------------------------------
>>> > #
>>> > # Lock the memory on startup:
>>> > #
>>> > #bootstrap.memory_lock: true
>>> > #
>>> > # Make sure that the heap size is set to about half the memory
>>> available
>>> > # on the system and that the owner of the process is allowed to use
>>> this
>>> > # limit.
>>> > #
>>> > # Elasticsearch performs poorly when the system is swapping the memory.
>>> > #
>>> > # ---------------------------------- Network
>>> > -----------------------------------
>>> > #
>>> > # Set the bind address to a specific IP (IPv4 or IPv6):
>>> > #
>>> > #network.host: 192.168.0.1
>>> > #
>>> > # Set a custom port for HTTP:
>>> > #
>>> > #http.port: 9200
>>> > #
>>> > # For more information, consult the network module documentation.
>>> > #
>>> > # --------------------------------- Discovery
>>> > ----------------------------------
>>> > #
>>> > # Pass an initial list of hosts to perform discovery when new node is
>>> > started:
>>> > # The default list of hosts is ["127.0.0.1", "[::1]"]
>>> > #
>>> > #discovery.zen.ping.unicast.hosts: ["host1", "host2"]
>>> > #
>>> > # Prevent the "split brain" by configuring the majority of nodes (total
>>> > number of master-eligible nodes / 2 + 1):
>>> > #
>>> > #discovery.zen.minimum_master_nodes: 3
>>> > #
>>> > # For more information, consult the zen discovery module documentation.
>>> > #
>>> > # ---------------------------------- Gateway
>>> > -----------------------------------
>>> > #
>>> > # Block initial recovery after a full cluster restart until N nodes are
>>> > started:
>>> > #
>>> > #gateway.recover_after_nodes: 3
>>> > #
>>> > # For more information, consult the gateway module documentation.
>>> > #
>>> > # ---------------------------------- Various
>>> > -----------------------------------
>>> > #
>>> > # Require explicit names when deleting indices:
>>> > #
>>> > #action.destructive_requires_name: true
>>> >
>>> >
>>> > Thanks for all of your help!
>>> >
>>> > Jim
>>> > --
>>> > Jim Miller
>>> >
>>> > On September 20, 2017 at 9:14:37 PM, Jim Miller (
>>> jemiller1963@gmail.com)
>>> > wrote:
>>> >
>>> > Hi Donald,
>>> >
>>> > I did not. I will read the release notes and update accordingly.
>>> >
>>> > Thanks!
>>> >
>>> > Jim
>>> >
>>> > --
>>> > Jim Miller
>>> >
>>> > On September 20, 2017 at 1:01:53 PM, Donald Szeto (donald@apache.org)
>>> wrote:
>>> >
>>> > Hey Jim,
>>> >
>>> > Did you build PIO 0.12 with ES 1.4 support? ES 1.x is being deprecated
>>> in
>>> > 0.12 so the default build will use ES 5.x support.
>>> >
>>> > See the upcoming release notes:
>>> > https://github.com/apache/incubator-predictionio/blob/releas
>>> e/0.12.0/RELEASE.md#behavior-changes
>>> >
>>> > Regards,
>>> > Donald
>>> >
>>> > On Wed, Sep 20, 2017 at 8:14 AM, Jim Miller <jemiller1963@gmail.com>
>>> wrote:
>>> >>
>>> >> Yes. I’m following this tutorial but using 0.12.0 instead of 0.10.0:
>>> >>
>>> >> https://medium.freecodecamp.org/building-an-recommendation-
>>> engine-with-apache-prediction-io-ml-server-aed0319e0d8
>>> >>
>>> >> --
>>> >> Jim Miller
>>> >>
>>> >> On September 20, 2017 at 10:51:39 AM, Pat Ferrel (
>>> pat@occamsmachete.com)
>>> >> wrote:
>>> >>
>>> >> meaning is “firstcluster” the cluster name in your Elasticsearch
>>> >> configuration?
>>> >>
>>> >>
>>> >> On Sep 19, 2017, at 8:54 PM, Vaghawan Ojha <vaghawan781@gmail.com>
>>> wrote:
>>> >>
>>> >> I think the problem is with Elasticsearch, are you sure the cluster
>>> exists
>>> >> in elasticsearch configuration?
>>> >>
>>> >> On Wed, Sep 20, 2017 at 8:17 AM, Jim Miller <jemiller1963@gmail.com>
>>> >> wrote:
>>> >>>
>>> >>> Hi,
>>> >>>
>>> >>> I’m using PredictionIO 0.12.0-incubating with ElasticSearch and
>>> Hbase:
>>> >>>
>>> >>> PredictionIO-0.12.0-incubating/vendors/elasticsearch-1.4.4
>>> >>> PredictionIO-0.12.0-incubating/vendors/hbase-1.0.0
>>> >>> PredictionIO-0.12.0-incubating/vendors/spark-1.5.1-bin-hadoop2.6
>>> >>>
>>> >>>
>>> >>> All starts with no errors but with pio status I get:
>>> >>>
>>> >>> [INFO] [Management$] Inspecting PredictionIO...
>>> >>> [INFO] [Management$] PredictionIO 0.12.0-incubating is installed
at
>>> >>> /home/vagrant/pio/PredictionIO-0.12.0-incubating
>>> >>> [INFO] [Management$] Inspecting Apache Spark...
>>> >>> [INFO] [Management$] Apache Spark is installed at
>>> >>> /home/vagrant/pio/PredictionIO-0.12.0-incubating/vendors/
>>> spark-1.5.1-bin-hadoop2.6
>>> >>> [INFO] [Management$] Apache Spark 1.5.1 detected (meets minimum
>>> >>> requirement of 1.3.0)
>>> >>> [INFO] [Management$] Inspecting storage backend connections...
>>> >>> [INFO] [Storage$] Verifying Meta Data Backend (Source:
>>> ELASTICSEARCH)...
>>> >>> [ERROR] [Management$] Unable to connect to all storage backends
>>> >>> successfully.
>>> >>> The following shows the error message from the storage backend.
>>> >>>
>>> >>> Connection closed
>>> >>> (org.apache.predictionio.shaded.org.apache.http.ConnectionCl
>>> osedException)
>>> >>>
>>> >>> Dumping configuration of initialized storage backend sources.
>>> >>> Please make sure they are correct.
>>> >>>
>>> >>> Source Name: ELASTICSEARCH; Type: elasticsearch; Configuration:
HOME
>>> ->
>>> >>> /home/vagrant/pio/PredictionIO-0.12.0-incubating/vendors/ela
>>> sticsearch-1.4.4,
>>> >>> HOSTS -> localhost, PORTS -> 9300, CLUSTERNAME -> firstcluster,
TYPE
>>> ->
>>> >>> elasticsearch
>>> >>>
>>> >>>
>>> >>> Can anyone give me an idea of what I need to fix this issue? Here
is
>>> >>>
>>> >>>
>>> >>> # PredictionIO Main Configuration
>>> >>> #
>>> >>> # This section controls core behavior of PredictionIO. It is very
>>> likely
>>> >>> that
>>> >>> # you need to change these to fit your site.
>>> >>>
>>> >>> # SPARK_HOME: Apache Spark is a hard dependency and must be
>>> configured.
>>> >>> # SPARK_HOME=$PIO_HOME/vendors/spark-2.0.2-bin-hadoop2.7
>>> >>> SPARK_HOME=$PIO_HOME/vendors/spark-1.5.1-bin-hadoop2.6
>>> >>>
>>> >>> POSTGRES_JDBC_DRIVER=$PIO_HOME/lib/postgresql-42.0.0.jar
>>> >>> MYSQL_JDBC_DRIVER=$PIO_HOME/lib/mysql-connector-java-5.1.41.jar
>>> >>>
>>> >>> # ES_CONF_DIR: You must configure this if you have advanced
>>> configuration
>>> >>> for
>>> >>> # your Elasticsearch setup.
>>> >>> ES_CONF_DIR=$PIO_HOME/vendors/elasticsearch-1.4.4/conf
>>> >>>
>>> >>> # HADOOP_CONF_DIR: You must configure this if you intend to run
>>> >>> PredictionIO
>>> >>> # with Hadoop 2.
>>> >>> HADOOP_CONF_DIR=$PIO_HOME/vendors/spark-1.5.1-bin-hadoop2.6/conf
>>> >>>
>>> >>> # HBASE_CONF_DIR: You must configure this if you intend to run
>>> >>> PredictionIO
>>> >>> # with HBase on a remote cluster.
>>> >>> HBASE_CONF_DIR=$PIO_HOME/vendors/hbase-1.0.0/conf
>>> >>>
>>> >>> # Filesystem paths where PredictionIO uses as block storage.
>>> >>> PIO_FS_BASEDIR=$HOME/.pio_store
>>> >>> PIO_FS_ENGINESDIR=$PIO_FS_BASEDIR/engines
>>> >>> PIO_FS_TMPDIR=$PIO_FS_BASEDIR/tmp
>>> >>>
>>> >>> # PredictionIO Storage Configuration
>>> >>> #
>>> >>> # This section controls programs that make use of PredictionIO's
>>> built-in
>>> >>> # storage facilities. Default values are shown below.
>>> >>> #
>>> >>> # For more information on storage configuration please refer to
>>> >>> # http://predictionio.incubator.apache.org/system/anotherdatastore/
>>> >>>
>>> >>> # Storage Repositories
>>> >>>
>>> >>> # Default is to use PostgreSQL
>>> >>> PIO_STORAGE_REPOSITORIES_METADATA_NAME=pio_meta
>>> >>> PIO_STORAGE_REPOSITORIES_METADATA_SOURCE=ELASTICSEARCH
>>> >>>
>>> >>> PIO_STORAGE_REPOSITORIES_EVENTDATA_NAME=pio_event
>>> >>> PIO_STORAGE_REPOSITORIES_EVENTDATA_SOURCE=HBASE
>>> >>>
>>> >>> PIO_STORAGE_REPOSITORIES_MODELDATA_NAME=pio_model
>>> >>> PIO_STORAGE_REPOSITORIES_MODELDATA_SOURCE=LOCALFS
>>> >>>
>>> >>> # Storage Data Sources
>>> >>>
>>> >>> # PostgreSQL Default Settings
>>> >>> # Please change "pio" to your database name in
>>> >>> PIO_STORAGE_SOURCES_PGSQL_URL
>>> >>> # Please change PIO_STORAGE_SOURCES_PGSQL_USERNAME and
>>> >>> # PIO_STORAGE_SOURCES_PGSQL_PASSWORD accordingly
>>> >>> # PIO_STORAGE_SOURCES_PGSQL_TYPE=jdbc
>>> >>> # PIO_STORAGE_SOURCES_PGSQL_URL=jdbc:postgresql://localhost/pio
>>> >>> # PIO_STORAGE_SOURCES_PGSQL_USERNAME=pio
>>> >>> # PIO_STORAGE_SOURCES_PGSQL_PASSWORD=pio
>>> >>>
>>> >>> # MySQL Example
>>> >>> # PIO_STORAGE_SOURCES_MYSQL_TYPE=jdbc
>>> >>> # PIO_STORAGE_SOURCES_MYSQL_URL=jdbc:mysql://localhost/pio
>>> >>> # PIO_STORAGE_SOURCES_MYSQL_USERNAME=pio
>>> >>> # PIO_STORAGE_SOURCES_MYSQL_PASSWORD=pio
>>> >>>
>>> >>> # Elasticsearch Example
>>> >>> # PIO_STORAGE_SOURCES_ELASTICSEARCH_TYPE=elasticsearch
>>> >>> # PIO_STORAGE_SOURCES_ELASTICSEARCH_HOSTS=localhost
>>> >>> # PIO_STORAGE_SOURCES_ELASTICSEARCH_PORTS=9200
>>> >>> # PIO_STORAGE_SOURCES_ELASTICSEARCH_SCHEMES=http
>>> >>> #
>>> >>> PIO_STORAGE_SOURCES_ELASTICSEARCH_HOME=$PIO_HOME/vendors/
>>> elasticsearch-5.5.2
>>> >>> # Optional basic HTTP auth
>>> >>> # PIO_STORAGE_SOURCES_ELASTICSEARCH_USERNAME=my-name
>>> >>> # PIO_STORAGE_SOURCES_ELASTICSEARCH_PASSWORD=my-secret
>>> >>> # Elasticsearch 1.x Example
>>> >>> PIO_STORAGE_SOURCES_ELASTICSEARCH_TYPE=elasticsearch
>>> >>> PIO_STORAGE_SOURCES_ELASTICSEARCH_CLUSTERNAME=firstcluster
>>> >>> PIO_STORAGE_SOURCES_ELASTICSEARCH_HOSTS=localhost
>>> >>> PIO_STORAGE_SOURCES_ELASTICSEARCH_PORTS=9300
>>> >>>
>>> >>> PIO_STORAGE_SOURCES_ELASTICSEARCH_HOME=$PIO_HOME/vendors/
>>> elasticsearch-1.4.4
>>> >>>
>>> >>> # Local File System Example
>>> >>> PIO_STORAGE_SOURCES_LOCALFS_TYPE=localfs
>>> >>> PIO_STORAGE_SOURCES_LOCALFS_PATH=$PIO_FS_BASEDIR/models
>>> >>>
>>> >>> # HBase Example
>>> >>> PIO_STORAGE_SOURCES_HBASE_TYPE=hbase
>>> >>> PIO_STORAGE_SOURCES_HBASE_HOME=$PIO_HOME/vendors/hbase-1.0.0
>>> >>>
>>> >>> # AWS S3 Example
>>> >>> # PIO_STORAGE_SOURCES_S3_TYPE=s3
>>> >>> # PIO_STORAGE_SOURCES_S3_BUCKET_NAME=pio_bucket
>>> >>> # PIO_STORAGE_SOURCES_S3_BASE_PATH=pio_model
>>> >>>
>>> >>>
>>> >>> Thanks,
>>> >>>
>>> >>> Jim
>>> >>>
>>> >>>
>>> >>> --
>>> >>> Jim Miller
>>> >>
>>> >>
>>> >>
>>> >
>>>
>>>
>

Mime
View raw message