perl-embperl mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Gerald Richter - ECOS GmbH" <rich...@ecos.de>
Subject RE: RE: make test error (was Introduction / SuSE Installation)
Date Thu, 07 Jun 2007 06:03:25 GMT

Hi,

> 
> Success!
> 

Great to hear that it works now. If you like you can write down a few 
lines of what you have done, so I can include these informations in the 
INSTALL documentation of Embperl

Gerald


> I went ahead with the make install and that went fine. I then 
> had a problem with getting it to work with the recommended 
> apache configuration, but I didn't want to bother the list 
> any more than I already have today. ;) I figured that out on 
> my own; turns out that even though I had mod_perl installed, 
> I didn't have it enabled in /etc/sysconfig/apache2. 
> Everything is copasetic now.
> 
> Thanks Gerald! I am SO stoked to have embperl at my disposal 
> again!! :D Have a great weekend.
> 
> - Gavin
> 
> P.S. It's amazing what one can accomplish after a 20 minute nap. ;)
> 
> >>> Gerald Richter - ECOS GmbH <richter@ecos.de> 05/25/07 12:03 PM >>>
> It looks like httpd (which runs as nobody) does not have 
> access to the embperl/test/html directory.
> 
> Normaly you should be able to run make install and use it 
> without problems
> 
> Gerald
> 
> 
> --------------------------------------------------------------
> ----------
> --
> Gerald Richter       ECOS electronic communication services GmbH
> *******************  SECURING YOUR NETWORK  ********************
> 
> Post:       Tulpenstrasse 5            D-55276 Dienheim b. Mainz
> E-Mail:     richter@ecos.de            Voice:   +49 6133 939-122
> WWW:        http://www.BB-5000.info    Fax:     +49 6133 939-333
> 
> Sitz der Gesellschaft: Dienheim; AG Mainz HRB 6889; GF: 
> W.Heck, G.Richter
> --------------------------------------------------------------
> ----------
> --
>  
>   
> 
> > -----Original Message-----
> > From: Gavin Spomer [mailto:spomerg@cwu.EDU]
> > Sent: Friday, May 25, 2007 8:54 PM
> > To: embperl@perl.apache.org
> > Subject: make test error (was Introduction / SuSE Installation)
> > 
> > Okay, made it through the perl Makefile.PL step just fine 
> and MOST of 
> > the make test step. At the end of that I encountered:
> > 
> >    Testing mod_perl mode...
> > 
> >    #0 ascii...                   ERR:Forbidden
> >    Input:          test/html/ascii
> >    Output:         test/tmp/out.htm
> >    Log:            test/tmp/test.log
> > 
> >     ERRORS detected! NOT all tests have been passed successfully
> > 
> > 
> >    Found unexpected output in httpd errorlog:
> >    [Fri May 25 11:21:47 2007] [crit] [client 127.0.0.1] 
> (13)Permission 
> > denied: /root/.htaccess pcfg_openfile: unable to check  
> htaccess file, 
> > ensure it is readable
> >    make: *** [test_dynamic] Error 1
> > 
> > Is this anything to be concerned with or can I proceed with 
> the make 
> > install step? I don't even have a .htaccess file in my /root/ 
> > directory. Is that the problem? Was I supposed to create 
> one or does 
> > the make test create that? I've searched the list archives for the 
> > solution to my problem with no luck.
> > 
> > - Gavin
> > 
> > >>> Gerald Richter - ECOS GmbH <richter@ecos.de> 05/25/07 
> 11:05 AM >>>
> > Hi,
> > 
> > You should also install, mod-perl, which is in a package called 
> > apache-perl (or similar), then Makefile.PL should 
> automaticly find the 
> > right paths
> > 
> > Gerald
> > 
> > 
> > --------------------------------------------------------------
> > ----------
> > --
> > Gerald Richter       ECOS electronic communication services GmbH
> > *******************  SECURING YOUR NETWORK  ********************
> > 
> > Post:       Tulpenstrasse 5            D-55276 Dienheim b. Mainz
> > E-Mail:     richter@ecos.de            Voice:   +49 6133 939-122
> > WWW:        http://www.BB-5000.info    Fax:     +49 6133 939-333
> > 
> > Sitz der Gesellschaft: Dienheim; AG Mainz HRB 6889; GF: 
> > W.Heck, G.Richter
> > --------------------------------------------------------------
> > ----------
> > --
> >  
> >   
> > 
> > > -----Original Message-----
> > > From: Gavin Spomer [mailto:spomerg@cwu.EDU]
> > > Sent: Friday, May 25, 2007 7:03 PM
> > > To: embperl@perl.apache.org
> > > Subject: RE: Introduction / SuSE Installation
> > > 
> > > >>> Gerald Richter - ECOS GmbH <richter@ecos.de> 05/25/07
> > 9:39 AM >>>
> > > > even uses an older version of SuSE. However I cannot locate the 
> > > > httpd.h header(?) file. I found the httpd daemon and the
> > mod_env.so
> > > > shared object files just fine. I use the the SuSE packaged 
> > > > apache-2.2.3-20 with apache2-prefork-2.2.3-20 for my web
> > server. Is
> > > > Embperl still do-able? Is there a file to locate other than the 
> > > > httpd.h that will work?
> > > > 
> > > 
> > > You need to install a SuSE package call something like 
> apache2-dev, 
> > > this will contains the developer sources and header files. (maybe 
> > > there is also a mod_perl (or
> > > apache-perl) /-dev which you need)
> > > 
> > > Gerald
> > > 
> > >    Excellent. I installed the apache2-devel package and now have 
> > > /usr/include/apache2/httpd.h.
> > > 
> > >    Also, my apache daemon is httpd2 (instead of httpd) which is 
> > > actually a symbolic link pointing to httpd2-prefork. When I
> > >    get to the part in the installation that will ask me for the 
> > > location of the daemon, can I enter /usr/sbin/httpd2 or will I
> > >    have to make a symbolic link from httpd (no "2") to
> > httpd2-prefork?
> > > 
> > >    Thanks a million, Gerald. I'm so excited to have my own 
> > > installation of embperl! :D
> > > 
> > >    - Gavin
> > > 
> > > 
> > 
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: embperl-unsubscribe@perl.apache.org
> > > For additional commands, e-mail: embperl-help@perl.apache.org
> > > 
> > > 
> > > ** Virus checked by BB-5000 Mailfilter ** 
> > > !DSPAM:416,4657187c188881847460177!
> > > 
> > > 
> > 
> > ** Virus checked by BB-5000 Mailfilter **
> > 
> > 
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: embperl-unsubscribe@perl.apache.org
> > For additional commands, e-mail: embperl-help@perl.apache.org
> > 
> > 
> > 
> > 
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: embperl-unsubscribe@perl.apache.org
> > For additional commands, e-mail: embperl-help@perl.apache.org
> > 
> > 
> > ** Virus checked by BB-5000 Mailfilter ** 
> > !DSPAM:416,46573270235711621998344!
> > 
> > 
> 
> ** Virus checked by BB-5000 Mailfilter **
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: embperl-unsubscribe@perl.apache.org
> For additional commands, e-mail: embperl-help@perl.apache.org
> 
> 
> ** Virus checked by BB-5000 Mailfilter ** 
> !DSPAM:416,4657700822041758320998!
> 
> 

** Virus checked by BB-5000 Mailfilter **

---------------------------------------------------------------------
To unsubscribe, e-mail: embperl-unsubscribe@perl.apache.org
For additional commands, e-mail: embperl-help@perl.apache.org


Mime
View raw message