pdfbox-users mailing list archives

Site index · List index
Message view
Top
From "Stahle, Patrick" <patrick.sta...@te.com>
Subject RE: drawing images with rotation PDFBox 2.0
Date Mon, 07 Mar 2016 17:51:21 GMT
```Hi Tillman,

Correct me if I am wrong, but it looks like the following instructions:
matrix.rotate(45);
canvas.transform(matrix);
Rotates the whole page canvas. So now the stream thinks as in the above example the page goes
up at a 45 degree angle. So cord. 0,0 is still in lower left hand corner, but if I move my
x cord only it will move from the lower left corner at a 45 degree angle towards the upper
right hand corner. So for me to put my image in the lower right hand corner I am going to
have to transform my x, y coordinates (y, will go negative in example) to put it in the right
position.  So simply I have to figure out the new x,y based off the angle....

-----Original Message-----
From: Tilman Hausherr [mailto:THausherr@t-online.de]
Sent: Monday, March 07, 2016 12:24 PM
To: users@pdfbox.apache.org
Subject: Re: drawing images with rotation PDFBox 2.0

rotation is around the lower left axis. That is why I wrote a few days
ago: "90° rotated in clock direction would be you'd have to adjust the Y value, i.e. add
the width to it."

Tilman

Am 07.03.2016 um 16:17 schrieb Stahle, Patrick:
> Hi,
>
> With the following code:
> 	Matrix matrix = new Matrix();
> 	matrix.rotate(45);
> 	canvas.saveGraphicsState();
> 	canvas.transform(matrix);
> 	canvas.drawImage(ximage, rect.getLowerLeftX(), rect.getLowerLeftY(), rect.getWidth(),
rect.getHeight());
> 	System.out.println("rect=" + rect + ", page mediabox=" + page.getMediaBox());
> 	canvas.restoreGraphicsState();
>
> System out:
> rect=[485.01,52.8,581.4,89.214], page mediabox=[0.0,0.0,612.0,792.0]
>
> I would expect my image to show up in the lower right hand corner, but I am seeing about
mid way down on the left hand side. Is the x, y position not starting form the bottom left?
>
> Thanks,
> Patrick
>
> -----Original Message-----
> From: Stahle, Patrick [mailto:patrick.stahle@te.com]
> Sent: Monday, March 07, 2016 9:57 AM
> To: users@pdfbox.apache.org
> Subject: RE: drawing images with rotation PDFBox 2.0
>
> Ok, I am lot closer. This seems to work. The only thing right now is I don't think the
position is correct, but I have to look at that a bit more...
> Seems like I have to first rotate & transform and then use the drawImage and pass
a width & height to scale it.
>
> 	Matrix matrix = new Matrix();
> 	matrix.rotate(45);
> 	canvas.saveGraphicsState();
> 	canvas.transform(matrix);
> 	canvas.drawImage(ximage, rect.getLowerLeftX(), rect.getLowerLeftY(), rect.getWidth(),
rect.getHeight());
> 	canvas.restoreGraphicsState();
>
> -----Original Message-----
> From: Stahle, Patrick [mailto:patrick.stahle@te.com]
> Sent: Monday, March 07, 2016 8:05 AM
> To: users@pdfbox.apache.org
> Subject: RE: drawing images with rotation PDFBox 2.0
>
> I don't know how to do the rotation without AffineTransform, do you have a suggestion
for at.rotate method call?
>
> -----Original Message-----
> From: Tilman Hausherr [mailto:THausherr@t-online.de]
> Sent: Friday, March 04, 2016 3:51 PM
> To: users@pdfbox.apache.org
> Subject: Re: drawing images with rotation PDFBox 2.0
>
> Am 04.03.2016 um 21:27 schrieb Stahle, Patrick:
>>   From the code below both images draw, but as soon as I uncomment out " canvas.transform(new
Matrix(at));" the first image does not draw or draws where I can't see it. I must still be
missing something?
>>
>> 	AffineTransform at = new AffineTransform(rect.getWidth(), 0, 0,
>> rect.getHeight(), 0, 0);
> Don't use the line above! Just create a pure rotation matrix.
>
>> 	PDPageContentStream canvas = new PDPageContentStream(document, page, PDPageContentStream.AppendMode.APPEND,
true, true);
>> 	canvas.saveGraphicsState();
>> 	//canvas.transform(new Matrix(at));
>> 	canvas.drawImage(ximage, 100 /*rect.getLowerLeftX()*/, 100 /*rect.getLowerLeftY()*/);
>> 	canvas.restoreGraphicsState();
>>
>> 	canvas.saveGraphicsState();
>> 	AffineTransform at2 = new AffineTransform(rect.getWidth(), 0, 0,
>> rect.getHeight(), rect.getLowerLeftX(), rect.getLowerLeftY());
> That line above too, don't use  it.
>
> Tilman
>
>
>> 	canvas.drawXObject(ximage, at2);
>> 	canvas.restoreGraphicsState();
>> 	canvas.close();
>>
>> -----Original Message-----
>> From: Tilman Hausherr [mailto:THausherr@t-online.de]
>> Sent: Friday, March 04, 2016 3:08 PM
>> To: users@pdfbox.apache.org
>> Subject: Re: drawing images with rotation PDFBox 2.0
>>
>> Am 04.03.2016 um 21:04 schrieb Stahle, Patrick:
>>> I tried the following but the image now no longer draws...
>>> 	AffineTransform at = new AffineTransform(rect.getWidth(), 0, 0, rect.getHeight(),
rect.getLowerLeftX(), rect.getLowerLeftY());
>>> 	PDPageContentStream canvas = new PDPageContentStream(document, page, PDPageContentStream.AppendMode.APPEND,
true, true);
>>> 	canvas.saveGraphicsState();
>>> 	canvas.transform(new Matrix(at));
>>> 	canvas.drawImage(ximage, rect.getLowerLeftX(), rect.getLowerLeftY());
>>> 	canvas.restoreGraphicsState();
>>> 	canvas.close();
>> No, what I meant is make a transform that has only the rotation. Then
>> draw the image at the position you're planning (however you may have
>> to adjust this, as the rotation is done around the (0,0) axis)
>>
>> The best would be to set a position like (300,300) which is about in the middle and
see what happens.
>>
>> 90° rotated in clock direction would be you'd have to adjust the Y value, i.e. add
the width to it.
>>
>> TIlman
>>
>>> Did I misunderstand something?
>>>
>>> As for the imaging squishing I am seeing. It looks to me like the rectangle size
/ position of the image non rotated stays exactly the same but the contents are rotated and
squished. I can send you a couple pdfs showing what I mean (direct email?). And maybe that
is how it is supposed to work, but I would of expected the image to look exactly the same
just rotated. In case of 90 degrees, like the example above, I would of expect simply the
width to become the height and the height to become the width.
>>>
>>> -----Original Message-----
>>> From: Tilman Hausherr [mailto:THausherr@t-online.de]
>>> Sent: Friday, March 04, 2016 2:44 PM
>>> To: users@pdfbox.apache.org
>>> Subject: Re: drawing images with rotation PDFBox 2.0
>>>
>>> Am 04.03.2016 um 20:35 schrieb Stahle, Patrick:
>>>> Hi,
>>>>
>>>> I am struggling with rotating an image. For instance I have the following
code:
>>>> AffineTransform at = new AffineTransform(rect.getWidth(), 0, 0,
>>>> rect.getHeight(), rect.getLowerLeftX(), rect.getLowerLeftY()); PDPageContentStream
canvas = new PDPageContentStream(document, page, PDPageContentStream.AppendMode.APPEND, true,
true);
>>>>                     canvas.drawXObject(ximage, at);
>>>>                     canvas.close();
>>>>
>>>> It seems to work, but not the way I would've expected it to. It rotates the
image but keeps the original boxed rectangle size which in this case squishing the image.
Is this expected behavior, and if so is there way for an image to rotate and keep the sizing?
I kind of hoped it work the same way as rotating text...
>>> Sorry I don't understand you... why should it not keep the size?
>>>
>>>> Also on a PDFBox 2.0 note, the "PDPageContentStream  -> drawXObject' is
deprecated and the source says to use drawImage instead. However I was not able to find a
drawImage method that takes AffineTransform. What is the recommended way to do this in 2.0
going forward?
>>>             saveGraphicsState();
>>>             transform(new Matrix(transform));  <== do the rotation
>>> only
>>>
>>>              drawImage()     <=== here just set the position
>>>
>>>             restoreGraphicsState();
>>>
>>>
>>>
>>> --------------------------------------------------------------------
>>> - To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>
>>>
>>> --------------------------------------------------------------------
>>> - To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
>> For additional commands, e-mail: users-help@pdfbox.apache.org
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org
> For additional commands, e-mail: users-help@pdfbox.apache.org
>

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@pdfbox.apache.org