openwhisk-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Duy Nguyen <duy.phngu...@gmail.com>
Subject Re: Error when deploying Whisk-Controller in dcos
Date Fri, 09 Mar 2018 13:29:34 GMT
Hi Kumar,

> 1) What should be the APIGATEWAY_DNS value? It is needed to install the
next packages.
> 2) You mentioned “make sure Route53 record was set up correctly” in
README . What should be done to verify it? Can you please give me step by
step instructions on how to verify it?

I think both questions come down to the point that you need a DNS to expose
the gateway.
There are various options for this. Our team uses Route53, basically by
mapping our DC/OS public slave address to a wildcard DNS (e.g. *.
openwhisk.example.com, which is set for APIGATEWAY_DNS in the deploy script).
I think the approach is the same even if you are using a different DNS
service.
If all go well, you should be able to access to your marathon services by
their service names, like controller.openwhisk.example.com.
We are aware that the api gateway flow is not perfect atm, and still
working on improving it. If you have any idea for this, please let us know.
:)

> Also some of the environment variables are missing like
DB_WHISK_ACTIVATIONS,KAFKA_HOSTS,CONTROLLER_INSTANCES,
CONTROLLER_LOCALBOOKKEEPING,AKKA_CLUSTER_SEED_NODES etc….

Those are defined in the mustache configs, which are exposed via DC/OS
configs.
https://github.com/apache/incubator-openwhisk-deploy-mesos/pull/2/files#diff-168a01e8dada294dd2d623a1aee704ed

cheers,
Duy


On Wed, Mar 7, 2018 at 10:06 PM, Kumar Subramanian <kumarsubrama@vmware.com>
wrote:

> Just consolidating the questions <<below>>
>
> On 3/7/18, 11:56 AM, "Kumar Subramanian" <kumarsubrama@vmware.com> wrote:
>
>     Hi Duy,
>     I was able to install the api gateway by calling make api-gateway.
> But, it was not straight forward. The api-gateway was in the waiting state
> for a long time. I had to suspend the deployment; set the acceptedRoles to
> null and restart the deployment then it worked (please see my earlier mails
> regarding probem with Api gateway installation)
>
>     Question:
> 1) What should be the APIGATEWAY_DNS value? It is needed to install the
> next packages.
> 2) You mentioned “make sure Route53 record was set up correctly” in README
> . What should be done to verify it? Can you please give me step by step
> instructions on how to verify it?
>
>     Thanks,
>     Kumar.
>
>     On 3/7/18, 11:15 AM, "Kumar Subramanian" <kumarsubrama@vmware.com>
> wrote:
>
>         Hi Duy,
>         One your instructions at https://github.com/duynguyen/
> incubator-openwhisk-deploy-mesos/tree/dcos-universe/dcos-deploy-script
>
>         You mention “make sure Route53 record was set up correctly” . What
> should be done to verify it? Can you please give me step by step
> instructions on how to verify it?
>
>         Thanks,
>         Kumar.
>
>         On 3/7/18, 10:52 AM, "Kumar Subramanian" <kumarsubrama@vmware.com>
> wrote:
>
>             Hi Duy,
>             I got your PR on my local MAC. I have a dcos cluster on remote
> machines. What are the instructions to deploy openwhisk to this dcos
> cluster?
>
>             Thanks,
>             Kumar.
>
>             On 3/7/18, 1:38 AM, "Duy Nguyen" <duy.phnguyen@gmail.com>
> wrote:
>
>                 Kumar - The PR has not been merged yet. Could you pull the
> PR itself to try?
>                 https://urldefense.proofpoint.
> com/v2/url?u=https-3A__github.com_apache_incubator-
> 2Dopenwhisk-2Ddeploy-2Dmesos_pull_2&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
> F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-
> 5iIC7nrIHVkvZv8gM&s=8q_6zaOcuwSuhZ4IcwVYfBZL2SAx6Jf9NGoyYbitGp0&e=
>
>                 cheers,
>                 Duy
>
>                 On Tue, Mar 6, 2018 at 7:45 PM, Kumar Subramanian <
> kumarsubrama@vmware.com>
>                 wrote:
>
>                 > Hi Duy,
>                 > I would love to try it.
>                 >
>                 > Is your changes in master? If so what’s master link?
>                 >
>                 > In the link https://urldefense.proofpoint.
> com/v2/url?u=https-3A__github.com_apache_incubator-
> 2Dopenwhisk-2Ddeploy-2Dmesos&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
> F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-
> 5iIC7nrIHVkvZv8gM&s=V6KK9cxXZORCCW_qK6d4qxaZC5vg-CajM4UQnusaP4c&e= I
>                 > only see a license.txt file in it.
>                 >
>                 > Thanks,
>                 > Kumar.
>                 >
>                 > On 3/6/18, 9:41 AM, "Duy Nguyen" <duy.phnguyen@gmail.com>
> wrote:
>                 >
>                 >     Hi Kumar,
>                 >
>                 >     I have updated the universe to latest Openwhisk
> changes, verified it
>                 > on a
>                 >     vanilla DC/OS 1.11 cluster, and opened a PR at [1],
> do you mind trying
>                 > it
>                 >     out?
>                 >     Hope it would solve bunch of issues you got earlier.
>                 >
>                 >     cheers,
>                 >     Duy
>                 >
>                 >     [1] https://urldefense.proofpoint.
> com/v2/url?u=https-3A__github.
>                 > com_apache_incubator-2Dopenwhisk-2Ddeploy-2Dmesos_
> pull_2&d=DwIFaQ&c=
>                 > uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLa
> p8zItxk8laWpo&m=
>                 > Wd0tt9Y6emKuk7HzgaeTCmlXjND8hGbhr2r-NAd74ug&s=
>                 > 6lelXSxZQpZSLezJ62bqfqxgcZkF3SNgkzaFNM_qZGU&e=
>                 >
>                 >
>                 >     On Tue, Mar 6, 2018 at 12:00 AM, Kumar Subramanian <
>                 > kumarsubrama@vmware.com>
>                 >     wrote:
>                 >
>                 >     > After I increased the timeout on the health checks
> I get the
>                 > following
>                 >     > [2018-03-05T22:58:34.042Z] [ERROR] [??]
> [KafkaMessagingProvider]
>                 >     > ensureTopic for completed0 failed due to
> java.util.concurrent.
>                 > ExecutionException:
>                 >     > org.apache.kafka.common.errors.TimeoutException:
> Timed out waiting
>                 > for a
>                 >     > node assignment.
>                 >     > [2018-03-05T22:58:34.044Z] [ERROR] [??]
> [Controller] failure during
>                 >     > msgProvider.ensureTopic for topic completed0
>                 >     > [INFO] [03/05/2018 22:58:34.070]
> [kamon-shutdown-hook-1]
>                 >     > [CoordinatedShutdown(akka://kamon)] Starting
> coordinated shutdown
>                 > from
>                 >     > JVM shutdown hook
>                 >     >
>                 >     > On 3/5/18, 2:58 PM, "Kumar Subramanian" <
> kumarsubrama@vmware.com>
>                 > wrote:
>                 >     >
>                 >     >     Hi Carlos/Tyson/Chetan,
>                 >     >     Any Suggestions?
>                 >     >
>                 >     >     Note: I just tried to increase the timeout on
> the health checks
>                 > …no
>                 >     > luck.
>                 >     >
>                 >     >     Thanks,
>                 >     >     Kumar.
>                 >     >
>                 >     >     On 3/5/18, 12:28 PM, "Kumar Subramanian" <
>                 > kumarsubrama@vmware.com>
>                 >     > wrote:
>                 >     >
>                 >     >         This is the output log
>                 >     >         [2018-03-05T20:24:10.016Z] [INFO]
> Initializing Kamon...
>                 >     >         [INFO] [03/05/2018 20:24:10.301] [main]
>                 >     > [StatsDExtension(akka://kamon)] Starting the
> Kamon(StatsD) extension
>                 >     >         [2018-03-05T20:24:10.352Z] [INFO]
> Slf4jLogger started
>                 >     >         [2018-03-05T20:24:10.706Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.whisk.actions
>                 >     >         [2018-03-05T20:24:10.707Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.protocol
>                 >     >         [2018-03-05T20:24:10.708Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for limits.actions.sequence.maxLength
>                 >     >         [2018-03-05T20:24:10.708Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for limits.triggers.fires.perMinute
>                 >     >         [2018-03-05T20:24:10.708Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for akka.cluster.seed.nodes
>                 >     >         [2018-03-05T20:24:10.709Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for limits.actions.invokes.concurrent
>                 >     >         [2018-03-05T20:24:10.709Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for controller.instances
>                 >     >         [2018-03-05T20:24:10.710Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for controller.localBookkeeping
>                 >     >         [2018-03-05T20:24:10.710Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for whisk.version.date
>                 >     >         [2018-03-05T20:24:10.710Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.port
>                 >     >         [2018-03-05T20:24:10.711Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for whisk.version.buildno
>                 >     >         [2018-03-05T20:24:10.711Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.whisk.activations
>                 >     >         [2018-03-05T20:24:10.711Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.username
>                 >     >         [2018-03-05T20:24:10.712Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for limits.actions.invokes.perMinute
>                 >     >         [2018-03-05T20:24:10.712Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.whisk.auths
>                 >     >         [2018-03-05T20:24:10.712Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for limits.actions.invokes.
> concurrentInSystem
>                 >     >         [2018-03-05T20:24:10.712Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for runtimes.manifest
>                 >     >         [2018-03-05T20:24:10.713Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for kafka.hosts
>                 >     >         [2018-03-05T20:24:10.713Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.host
>                 >     >         [2018-03-05T20:24:10.713Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for port
>                 >     >         [2018-03-05T20:24:10.714Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.password
>                 >     >         [2018-03-05T20:24:10.714Z] [INFO] [??]
> [Config] environment
>                 > set
>                 >     > value for db.provider
>                 >     >         Received killTask for task
> whisk-controller.28d25d91-
>                 >     > 20b3-11e8-8754-3afdc003616b
>                 >     >         [INFO] [03/05/2018 20:25:38.974]
> [kamon-shutdown-hook-1]
>                 >     > [CoordinatedShutdown(akka://kamon)] Starting
> coordinated shutdown
>                 > from
>                 >     > JVM shutdown hook
>                 >     >         [2018-03-05T20:25:38.975Z] [INFO] Starting
> coordinated
>                 > shutdown
>                 >     > from JVM shutdown hook
>                 >     >         [2018-03-05T20:25:38.982Z] [INFO] [??]
> [Controller] Shutting
>                 > down
>                 >     > Kamon with coordinated shutdown
>                 >     >
>                 >     >         ERROR_LOG
>                 >     >         I0305 20:24:09.220711  1337 exec.cpp:162]
> Version: 1.2.3
>                 >     >         I0305 20:24:09.227144  1338 exec.cpp:237]
> Executor
>                 > registered on
>                 >     > agent 995020e0-5129-44a3-8cf4-65900838b3af-S7
>                 >     >         W0305 20:24:09.227144  1341
> logging.cpp:91] RAW: Received
>                 > signal
>                 >     > SIGTERM from process 10243 of user 0; exiting
>                 >     >
>                 >     >         On 3/5/18, 12:24 PM, "Kumar Subramanian" <
>                 > kumarsubrama@vmware.com>
>                 >     > wrote:
>                 >     >
>                 >     >             I get the following error while in the
> deploying state
>                 > (then
>                 >     > kills it automatically and re-installs and goes
> on…)
>                 >     >             Task was killed since health check
> failed. Reason:
>                 >     > ConnectionAttemptFailedException: Connection
> attempt to
>                 >     > <whisk_controller_ip>>:8888 failed
>                 >     >
>                 >     >
>                 >     >
>                 >     >             On 3/5/18, 12:21 PM, "Kumar
> Subramanian" <
>                 >     > kumarsubrama@vmware.com> wrote:
>                 >     >
>                 >     >                 Gave the value as
> mykafka.marathon.mesos:9092…it
>                 > seems to
>                 >     > be going forward now with the deployment…hope it
> succeeds
>                 >     >
>                 >     >                 On 3/5/18, 12:13 PM, "Kumar
> Subramanian" <
>                 >     > kumarsubrama@vmware.com> wrote:
>                 >     >
>                 >     >                     Hi Chetan,
>                 >     >                     I resolved all the settings
> (not sure about some
>                 > those
>                 >     > values set)….now I’m getting the following error
>                 >     >                     I0305 20:07:00.341622 21216
> exec.cpp:162]
>                 > Version:
>                 >     > 1.2.3
>                 >     >                     I0305 20:07:00.347102 21224
> exec.cpp:237]
>                 > Executor
>                 >     > registered on agent 995020e0-5129-44a3-8cf4-
> 65900838b3af-S4
>                 >     >                     Exception in thread "main"
>                 > org.apache.kafka.common.KafkaException:
>                 >     > Failed create new KafkaAdminClient
>                 >     >                         at
> org.apache.kafka.clients.
>                 >     > admin.KafkaAdminClient.createInternal(
> KafkaAdminClient.java:322)
>                 >     >                         at
> org.apache.kafka.clients.
>                 >     > admin.AdminClient.create(AdminClient.java:50)
>                 >     >                         at whisk.connector.kafka.
>                 > KafkaMessagingProvider$.
>                 >     > ensureTopic(KafkaMessagingProvider.scala:70)
>                 >     >                         at whisk.core.controller.
>                 >     > Controller$.main(Controller.scala:217)
>                 >     >                         at whisk.core.controller.
>                 >     > Controller.main(Controller.scala)
>                 >     >                     Caused by:
> org.apache.kafka.common.
>                 > config.ConfigException:
>                 >     > No resolvable bootstrap urls given in
> bootstrap.servers
>                 >     >                         at
> org.apache.kafka.clients.ClientUtils.
>                 >     > parseAndValidateAddresses(ClientUtils.java:64)
>                 >     >                         at
> org.apache.kafka.clients.
>                 >     > admin.KafkaAdminClient.<init>(
> KafkaAdminClient.java:345)
>                 >     >                         at
> org.apache.kafka.clients.
>                 >     > admin.KafkaAdminClient.createInternal(
> KafkaAdminClient.java:315)
>                 >     >                         ... 4 more
>                 >     >                     <<WHISK_CONTROLLER ENVIRONMENT
> SETTINGS>>
>                 >     >                     The config environment values
> are:
>                 >     >                     "KAFKA_HOST":
> "broker-0.kafka.mesos"
>                 >     >                     "KAFKA_HOSTS":
> "mykafka.docker:9092"
>                 >     >
>                 >     >
>                 >     >                     Here is the Kakfka service in
> my dcos services
>                 >     >                     <<KAFKA_SERVICE>>
>                 >     >                     ID: mykafka.654fa8cd-1e56-11e8-
> 8754-3afdc003616b
>                 >     >                     Name: mykafka
>                 >     >                     Address: <<internal_ip>>
>                 >     >                     Status: Running
>                 >     >
>                 >     >                     On 3/5/18, 12:01 PM, "Kumar
> Subramanian" <
>                 >     > kumarsubrama@vmware.com> wrote:
>                 >     >
>                 >     >                         Also what is
> DB_WHISK_ACTIVATIONS=local_
>                 > activations,
>                 >     > what does it mean by “local” activations? This
> setting is also
>                 > needed, what
>                 >     > should the value be in my dcos env? Should it
> still be
>                 > local_activations?
>                 >     >
>                 >     >                         On 3/5/18, 11:48 AM,
> "Kumar Subramanian" <
>                 >     > kumarsubrama@vmware.com> wrote:
>                 >     >
>                 >     >                             Thanks Chetan, I added
> that now I’m
>                 > getting the
>                 >     >
>                 >     >
>  [2018-03-05T19:43:45.025Z] [ERROR] [??]
>                 >     > [Config] required property kafka.hosts still not
> set
>                 >     >
>                 >     >                             what is kafka.hosts is
> that the kafka
>                 > host
>                 >     > name? (as in mykafka…that;s the kafka name I gave
> when I installed
>                 > kakfa).
>                 >     > Should it be just the name or is FQDN ?
>                 >     >
>                 >     >
>                 >     >                             On 3/5/18, 11:32 AM,
> "Chetan Mehrotra" <
>                 >     > chetan.mehrotra@gmail.com> wrote:
>                 >     >
>                 >     >                                 > required property
>                 > controller.instances
>                 >     > still not set
>                 >     >
>                 >     >                                 Looks like some
> configs are missing.
>                 > You
>                 >     > would need to this or few
>                 >     >                                 more props. The
> configs are generally
>                 >     > managed via Ansible for default
>                 >     >                                 setup. For dcos
> you may need to
>                 > configure
>                 >     > them explicitly. You can see
>                 >     >                                 various configs
> and there values as
>                 > an
>                 >     > example at [1]
>                 >     >
>  (controller.instances becomes
>                 >     > CONTROLLER_INSTANCES). They would need
>                 >     >                                 to be tweaked as
> per your setup
>                 > though
>                 >     >
>                 >     >                                 Chetan Mehrotra
>                 >     >                                 [1]
> https://urldefense.proofpoint.com/v2/url?u=https-3A__
> urldefense.proofpoint&d=DwIFaQ&c=uilaK90D4TOVoH58JNXRgQ&r=
> F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=afQz0NoScGRmefphc9MyV-bV9-
> 5iIC7nrIHVkvZv8gM&s=krGGBEv7Z5rMpichLLcCKYj4GYHLFGSXDB7se_zq9t8&e=.
>                 > com/v2/url?u=https-3A__urldefense.proofpoint&d=DwIFaQ&c=
>                 > uilaK90D4TOVoH58JNXRgQ&r=F5C8fYlpBJ270qrdwLq2iRQrPd1CLa
> p8zItxk8laWpo&m=
>                 > Wd0tt9Y6emKuk7HzgaeTCmlXjND8hG
> bhr2r-NAd74ug&s=hoaE2rcIjVS-9GdlR2d-
>                 > rNVCuHc4I3L3hG3J5MxHMss&e=.
>                 >     > com/v2/url?u=https-3A__github.
> com_apache_incubator-
>                 >     > 2Dopenwhisk-2Ddevtools_blob_
> master_docker-2Dcompose_
>                 >     > docker-2Dwhisk-2Dcontroller.env&d=DwIFaQ&c=
> uilaK90D4TOVoH58JNXRgQ&r=
>                 >     > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
>                 > K8Rzl5BrVqOWFx5b1fYG8EjdY-
>                 >     > 6JVyi-x_eMD0thaKY&s=VfbixlUG4tFbgBNxiMr-
> KCNJOakmlGuNcnXLlbQMrVY&e=
>                 >     >
>                 >     >
>                 >     >                                 On Tue, Mar 6,
> 2018 at 12:09 AM,
>                 > Kumar
>                 >     > Subramanian
>                 >     >                                 <
> kumarsubrama@vmware.com> wrote:
>                 >     >                                 > Hi,
>                 >     >                                 > I was able to
> successfully do the
>                 >     > following
>                 >     >                                 > 1) Build the
> Controller image
>                 >     >                                 > 2) Push the image
>                 >     >                                 >
>                 >     >                                 > However when I
> installed the
>                 > controller
>                 >     > package it gives me the following error in the
> output; then it shuts
>                 > down
>                 >     > and retries the installation (goes on…)
>                 >     >                                 >
>                 >     >                                 > Registered
> docker executor on
>                 > 10.0.6.13
>                 >     >                                 > Starting task
>                 > whisk-controller.a46ae612-
>                 >     > 20a2-11e8-8754-3afdc003616b
>                 >     >                                 >
> [2018-03-05T18:25:55.853Z] [INFO]
>                 >     > Initializing Kamon...
>                 >     >                                 > [INFO]
> [03/05/2018 18:25:56.151]
>                 > [main]
>                 >     > [StatsDExtension(akka://kamon)] Starting the
> Kamon(StatsD) extension
>                 >     >                                 >
> [2018-03-05T18:25:56.193Z] [INFO]
>                 >     > Slf4jLogger started
>                 >     >                                 >
> [2018-03-05T18:25:56.552Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for db.whisk.actions
>                 >     >                                 >
> [2018-03-05T18:25:56.554Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for db.protocol
>                 >     >                                 >
> [2018-03-05T18:25:56.554Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for
> limits.triggers.fires.perMinute
>                 >     >                                 >
> [2018-03-05T18:25:56.554Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for
> limits.actions.invokes.concurrent
>                 >     >                                 >
> [2018-03-05T18:25:56.555Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for
> whisk.version.date
>                 >     >                                 >
> [2018-03-05T18:25:56.555Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for db.port
>                 >     >                                 >
> [2018-03-05T18:25:56.555Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for
> whisk.version.buildno
>                 >     >                                 >
> [2018-03-05T18:25:56.556Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for db.username
>                 >     >                                 >
> [2018-03-05T18:25:56.556Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for
> limits.actions.invokes.perMinute
>                 >     >                                 >
> [2018-03-05T18:25:56.556Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for db.whisk.auths
>                 >     >                                 >
> [2018-03-05T18:25:56.556Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for
> limits.actions.invokes.
>                 >     > concurrentInSystem
>                 >     >                                 >
> [2018-03-05T18:25:56.557Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for
> runtimes.manifest
>                 >     >                                 >
> [2018-03-05T18:25:56.557Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for db.host
>                 >     >                                 >
> [2018-03-05T18:25:56.558Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for port
>                 >     >                                 >
> [2018-03-05T18:25:56.558Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for db.password
>                 >     >                                 >
> [2018-03-05T18:25:56.558Z] [INFO]
>                 > [??]
>                 >     > [Config] environment set value for db.provider
>                 >     >                                 >
> [2018-03-05T18:25:56.561Z] [ERROR]
>                 > [??]
>                 >     > [Config] required property controller.instances
> still not set
>                 >     >                                 >
> [2018-03-05T18:25:56.561Z] [ERROR]
>                 > [??]
>                 >     > [Controller] Bad configuration, cannot start.
>                 >     >                                 >
>                 >     >                                 > Any suggestions?
>                 >     >                                 >
>                 >     >                                 >
>                 >     >                                 > On 3/2/18, 4:05
> PM, "Kumar
>                 > Subramanian" <
>                 >     > kumarsubrama@vmware.com> wrote:
>                 >     >                                 >
>                 >     >                                 >     This is the
> error I get when I
>                 > did
>                 >     > docker build (for Controller)
>                 >     >                                 >
>                 >     >                                 >     Step 1/7 :
> FROM scala
>                 >     >                                 >     repository
> scala not found:
>                 > does not
>                 >     > exist or no pull access
>                 >     >                                 >
>                 >     >                                 >
>                 >     >                                 >     Any
> Suggestions?
>                 >     >                                 >
>                 >     >                                 >     On 3/2/18,
> 3:34 PM, "Carlos
>                 > Santana"
>                 >     > <csantana23@gmail.com> wrote:
>                 >     >                                 >
>                 >     >                                 >         No that
> it’s still in PR
>                 >     >                                 >
>                 >     >                                 >         Just
> pull the changes
>                 > locally
>                 >     > and build
>                 >     >                                 >
>                 >     >                                 >         - Carlos
> Santana
>                 >     >                                 >
>  @csantanapr
>                 >     >                                 >
>                 >     >                                 >         > On Mar
> 2, 2018, at 6:20
>                 > PM,
>                 >     > Kumar Subramanian <kumarsubrama@vmware.com> wrote:
>                 >     >                                 >         >
>                 >     >                                 >         > Is
> that change at
>                 >     > https://urldefense.proofpoint.
> com/v2/url?u=https-3A__github.
>                 >     > com_chetanmeh_incubator-2Dopenwhisk_blob_
>                 > fa302249f4f9b4e6b3084956f18bda
>                 >     > 987674f46f_core_controller_Dockerfile&d=DwIFaQ&c=
>                 > uilaK90D4TOVoH58JNXRgQ&r=
>                 >     > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
> nLubLAFijdQ4pOPqIydDI_
>                 >     > wguMgbdmdmoMXcP7g-m8k&s=0_zv4jTDip5Uk9oBB5-6Ka_
>                 > Iug3KYWIhy7qzSDryqM0&e=
>                 >     > not merged? I don’t see change in master
>                 > https://urldefense.proofpoint.com/v2/url?u=https-3A__
>                 > urldefense.proofpoint&d=DwIFaQ&c=
> uilaK90D4TOVoH58JNXRgQ&r=
>                 > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
>                 > Wd0tt9Y6emKuk7HzgaeTCmlXjND8hG
> bhr2r-NAd74ug&s=hoaE2rcIjVS-9GdlR2d-
>                 > rNVCuHc4I3L3hG3J5MxHMss&e=.
>                 >     > com/v2/url?u=https-3A__github.
> com_apache_incubator-
>                 >     > 2Dopenwhisk_blob_master_core_
> controller_Dockerfile&d=DwIFaQ&c=
>                 >     > uilaK90D4TOVoH58JNXRgQ&r=
> F5C8fYlpBJ270qrdwLq2iRQrPd1CLa
>                 > p8zItxk8laWpo&m=
>                 >     > nLubLAFijdQ4pOPqIydDI_wguMgbdmdmoMXcP7g-m8k&s=TdB-
> IjihM3-
>                 >     > 0dqBF029dSMkoWbZHBAUXXqeDjfQMlhg&e=
>                 >     >                                 >         >
>                 >     >                                 >         > Thanks,
>                 >     >                                 >         > Kumar.
>                 >     >                                 >         >
>                 >     >                                 >         > On
> 3/2/18, 2:59 PM,
>                 > "Kumar
>                 >     > Subramanian" <kumarsubrama@vmware.com> wrote:
>                 >     >                                 >         >
>                 >     >                                 >         >    Ok,
> I will try to
>                 > build the
>                 >     > controller image and see. Will keep you posted.
>                 >     >                                 >         >
>                 >     >                                 >         >    On
> 3/2/18, 2:39 PM,
>                 > "Tyson
>                 >     > Norris" <tnorris@adobe.com.INVALID> wrote:
>                 >     >                                 >         >
>                 >     >                                 >         >
> Thanks Carlos - I
>                 > think
>                 >     > you’re right.
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
> Kumar you can
>                 > either
>                 >     > build the controller image with that PR, or else
> you should be able
>                 > to
>                 >     > manually set the docker cmd, e.g. /bin/sh -c
> \"exec /init.sh 0 >>
>                 >     > /dev/stdout\” on the dcos service for controller;
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
> I think you will
>                 > have
>                 >     > similar issue with invoker, mostly because this
> universe is far out
>                 > of date
>                 >     > from current openwhisk images.
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
> For invoker can
>                 > you use
>                 >     > the docker cmd as /bin/sh -c \"exec /init.sh
> --name $LIBPROCESS_IP >>
>                 >     > /dev/stdout\”
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
> Additionally, the
>                 > env
>                 >     > vars (both invoker and controller) have changed
> substantially, so I
>                 > would
>                 >     > expect a few hiccups there as well.
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
> We are working on
>                 >     > getting updates to the universe so that our
> internal deployment
>                 > details are
>                 >     > not included, and it will actually work with
> recent openwhisk images
>                 > (and
>                 >     > stay working) but haven’t gotten everything set
> just yet.
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
> Hope that helps
>                 >     >                                 >         >
>                 >     >                                 >         >
> Tyson
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >>> On
> Mar 2, 2018, at
>                 > 2:21 PM,
>                 >     > Carlos Santana <csantana23@gmail.com> wrote:
>                 >     >                                 >         >>
>                 >     >                                 >         >>
>                 >     >                                 >         >
>                 >     >                                 >         >> Maybe
> for the init.sh
>                 > this PR
>                 >     > is related
>                 >     >                                 >         >
>                 >     >                                 >         >>
>                 >     > https://urldefense.proofpoint.
> com/v2/url?u=https-3A__na01.
>                 >     > safelinks.protection.outlook.
> com_-3Furl-3Dhttps-253A-252F-
>                 >     > 252Fgithub.com-252Fapache-
> 252Fincubator-2Dopenwhisk-
>                 >     > 252Fpull-252F3374-252Ffiles-2523diff-
> 2D8f445fbdf6253dd176975ff6c629
>                 >     > def4R18-26data-3D02-257C01-
> 257Ctnorris-2540adobe.com-
>                 >     > 257C605cc50c7a484ccb833708d5808bfe64-
> 257Cfa7b1b5a7b34438794aed2c178
>                 >     > decee1-257C0-257C0-257C636556261107863657-26sdata-
>                 >     > 3Dtk8Des10hubLs7FNSgzDlsk1ibxD
> TIqSlXti-252FcAUyz0-253D-
>                 >     > 26reserved-3D0&d=DwIGaQ&c=
> uilaK90D4TOVoH58JNXRgQ&r=
>                 >     > F5C8fYlpBJ270qrdwLq2iRQrPd1CLap8zItxk8laWpo&m=
>                 >     > LUthdew4Dt10vSAZSYRBbREqgwWk2PUWc4KDBJtt0uU&s=
>                 >     > 3UqWljTQjItMnzWhPrsfD1AF2IX6abtc9dYRfrxb2_M&e=
>                 >     >                                 >         >
>                 >     >                                 >         >>
>                 >     >                                 >         >
>                 >     >                                 >         >>
>                 >     >                                 >         >
>                 >     >                                 >         >> On
> Fri, Mar 2, 2018 at
>                 > 5:09
>                 >     > PM Tyson Norris <tnorris@adobe.com.invalid>
>                 >     >                                 >         >
>                 >     >                                 >         >> wrote:
>                 >     >                                 >         >
>                 >     >                                 >         >>
>                 >     >                                 >         >
>                 >     >                                 >         >>>
> Check your
>                 > marathon/dcos
>                 >     > service config to verify what image is used, and
>                 >     >                                 >         >
>                 >     >                                 >         >>> that
> you have the
>                 > latest
>                 >     > image pulled?
>                 >     >                                 >         >
>                 >     >                                 >         >>>
>                 >     >                                 >         >
>                 >     >                                 >         >>> The
> default should be
>                 >     > openwhisk/controller - but I see that universe
>                 >     >                                 >         >
>                 >     >                                 >         >>>
> package marathon
>                 > config is
>                 >     > not set to force pull, so if you are using that
>                 >     >                                 >         >
>                 >     >                                 >         >>>
> image, make sure you
>                 > have
>                 >     > pulled the latest manually (or change the config
>                 >     >                                 >         >
>                 >     >                                 >         >>> to
> force pull in
>                 >     > dcos/marathon ui).
>                 >     >                                 >         >
>                 >     >                                 >         >>>
>                 >     >                                 >         >
>                 >     >                                 >         >>> Tyson
>                 >     >                                 >         >
>                 >     >                                 >         >>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>> On
> Mar 2, 2018, at
>                 > 12:45
>                 >     > PM, Kumar Subramanian <kumarsubrama@vmware.com>
>                 >     >                                 >         >
>                 >     >                                 >         >>>
> wrote:
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>> Hi,
>                 >     >                                 >         >
>                 >     >                                 >         >>>> I
> have installed the
>                 >     > following in DCOS successfully:
>                 >     >                                 >         >
>                 >     >                                 >         >>>> 1.
> Apigateway
>                 >     >                                 >         >
>                 >     >                                 >         >>>> 2.
> Exhibitor-dcos
>                 >     >                                 >         >
>                 >     >                                 >         >>>> 3.
> Kafka (name given
>                 > is
>                 >     > mykafka at the time of installation)
>                 >     >                                 >         >
>                 >     >                                 >         >>>> 4.
> Whisk-couchdb
>                 >     >                                 >         >
>                 >     >                                 >         >>>> 5.
> Consul
>                 >     >                                 >         >
>                 >     >                                 >         >>>> 6.
> Registrator
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> Eror when deploying
>                 >     > Whisk-Controller in DCOS:
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> When I tried to deploy
>                 >     > whisk-controller with default settings, then the
>                 >     >                                 >         >
>                 >     >                                 >         >>>
> service fails to
>                 > deploy (it
>                 >     > just kills and redploys the service
>                 >     >                                 >         >
>                 >     >                                 >         >>>
> continuously on its
>                 > own when
>                 >     > deploying)
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> Here is the content
>                 > in the
>                 >     > Error and Output
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> STDERR:
>                 >     >                                 >         >
>                 >     >                                 >         >>>> (AT
> BEGINNING OF FILE)
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> I0302 20:38:35.176177
>                 > 19822
>                 >     > exec.cpp:162] Version: 1.2.3
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> I0302 20:38:35.180703
>                 > 19824
>                 >     > exec.cpp:237] Executor registered on agent
>                 >     >                                 >         >
>                 >     >                                 >         >>>
>                 > 995020e0-5129-44a3-8cf4-
>                 >     > 65900838b3af-S6
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> docker: Error
>                 > response from
>                 >     > daemon: Container command 'init.sh' not
>                 >     >                                 >         >
>                 >     >                                 >         >>>
> found or does not
>                 > exist..
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> OUTPUT:
>                 >     >                                 >         >
>                 >     >                                 >         >>>> (AT
> BEGINNING OF FILE)
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> Registered docker
>                 > executor
>                 >     > on 10.0.6.55
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> Starting task
>                 >     > whisk-controller.adb62c44-
> 1e59-11e8-8754-3afdc003616b
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>> Can
> you please
>                 > provide your
>                 >     > valuable inputs on how to get
>                 >     >                                 >         >
>                 >     >                                 >         >>>
> whisk-controller
>                 > deployed in
>                 >     > dcos?
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> Thanks,
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
> Kumar.
>                 >     >                                 >         >
>                 >     >                                 >         >>>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>
>                 >     >                                 >         >
>                 >     >                                 >         >>>
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >         >
>                 >     >                                 >
>                 >     >                                 >
>                 >     >                                 >
>                 >     >                                 >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >     >
>                 >
>                 >
>                 >
>
>
>
>
>
>
>
>
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message