nuttx-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From xiaoxi...@apache.org
Subject [incubator-nuttx] branch master updated: esp32: Another OpenOCD example config
Date Mon, 30 Mar 2020 04:55:54 GMT
This is an automated email from the ASF dual-hosted git repository.

xiaoxiang pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/incubator-nuttx.git


The following commit(s) were added to refs/heads/master by this push:
     new 34de90e  esp32: Another OpenOCD example config
34de90e is described below

commit 34de90e632451e3481c8634b9b0a82291524977d
Author: YAMAMOTO Takashi <yamamoto@midokura.com>
AuthorDate: Mon Mar 30 13:23:52 2020 +0900

    esp32: Another OpenOCD example config
---
 boards/xtensa/esp32/esp32-core/README.txt          | 22 ++++++++++++++++++++++
 .../esp32/esp32-core/scripts/esp32-ft232h.cfg      |  6 ++++++
 2 files changed, 28 insertions(+)

diff --git a/boards/xtensa/esp32/esp32-core/README.txt b/boards/xtensa/esp32/esp32-core/README.txt
index 04fecfa..ba24aab 100644
--- a/boards/xtensa/esp32/esp32-core/README.txt
+++ b/boards/xtensa/esp32/esp32-core/README.txt
@@ -289,6 +289,28 @@ OpenOCD for the ESP32
       need to specify the interface configuration file on the OpenOCD
       command line.
 
+  NOTE: Another OpenOCD configuration file is available in the NuttX
+  source tree at
+  nuttx/boards/xtensa/esp32/esp32-core/scripts/esp32-ft232h.cfg .
+  It has been tested with:
+
+    - ESP32-DevKitC V4
+
+      https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-devkitc.html
+
+    - Akizukidenshi's FT232H based JTAG adapter
+
+      http://akizukidenshi.com/catalog/g/gK-06503/
+
+    - The following version of OpenOCD from ESP-IDF (macOS version)
+
+      % openocd --version
+      Open On-Chip Debugger  v0.10.0-esp32-20191114 (2019-11-14-14:19)
+      Licensed under GNU GPL v2
+      For bug reports, read
+              http://openocd.org/doc/doxygen/bugs.html
+      %
+
   General OpenOCD build instructions
   ----------------------------------
   Installing OpenOCD.  The sources for the ESP32-enabled variant of
diff --git a/boards/xtensa/esp32/esp32-core/scripts/esp32-ft232h.cfg b/boards/xtensa/esp32/esp32-core/scripts/esp32-ft232h.cfg
new file mode 100644
index 0000000..52402c6
--- /dev/null
+++ b/boards/xtensa/esp32/esp32-core/scripts/esp32-ft232h.cfg
@@ -0,0 +1,6 @@
+source [find interface/ftdi/um232h.cfg]
+transport select jtag
+adapter_khz 2000
+set ESP32_FLASH_VOLTAGE 3.3
+set ESP32_RTOS none
+source [find target/esp32.cfg]


Mime
View raw message