mynewt-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From ma...@apache.org
Subject [03/52] [partial] incubator-mynewt-core git commit: Add support for STM32F7xx and NUCLEO-F767
Date Fri, 10 Mar 2017 19:51:08 GMT
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd.h
----------------------------------------------------------------------
diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd.h
new file mode 100644
index 0000000..f57645a
--- /dev/null
+++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd.h
@@ -0,0 +1,337 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pcd.h
+  * @author  MCD Application Team
+  * @version V1.2.0
+  * @date    30-December-2016
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PCD_H
+#define __STM32F7xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_usb.h"
+   
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCD
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup PCD_Exported_Types PCD Exported Types
+  * @{
+  */
+   
+/**
+  * @brief  PCD State structure definition
+  */ 
+typedef enum 
+{
+  HAL_PCD_STATE_RESET   = 0x00U,
+  HAL_PCD_STATE_READY   = 0x01U,
+  HAL_PCD_STATE_ERROR   = 0x02U,
+  HAL_PCD_STATE_BUSY    = 0x03U,
+  HAL_PCD_STATE_TIMEOUT = 0x04U
+} PCD_StateTypeDef;
+
+/* Device LPM suspend state */
+typedef enum  
+{
+  LPM_L0 = 0x00U, /* on */
+  LPM_L1 = 0x01U, /* LPM L1 sleep */
+  LPM_L2 = 0x02U, /* suspend */
+  LPM_L3 = 0x03U, /* off */
+}PCD_LPM_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef  PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef     PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef      PCD_EPTypeDef ;                          
+
+/** 
+  * @brief  PCD Handle Structure definition  
+  */ 
+typedef struct
+{
+  PCD_TypeDef             *Instance;   /*!< Register base address              */ 
+  PCD_InitTypeDef         Init;       /*!< PCD required parameters            */
+  PCD_EPTypeDef           IN_ep[16];  /*!< IN endpoint parameters             */
+  PCD_EPTypeDef           OUT_ep[16]; /*!< OUT endpoint parameters            */ 
+  HAL_LockTypeDef         Lock;       /*!< PCD peripheral status              */
+  __IO PCD_StateTypeDef   State;      /*!< PCD communication state            */
+  uint32_t                Setup[12];  /*!< Setup packet buffer                */
+  PCD_LPM_StateTypeDef    LPM_State;    /*!< LPM State                          */
+  uint32_t                BESL;
+  uint32_t                lpm_active;   /*!< Enable or disable the Link Power Management .                                  
+                                        This parameter can be set to ENABLE or DISABLE */
+  
+  uint32_t battery_charging_active;     /*!< Enable or disable Battery charging.                                  
+                                        This parameter can be set to ENABLE or DISABLE                      */
+  void                    *pData;       /*!< Pointer to upper stack Handler */  
+} PCD_HandleTypeDef;
+
+/**
+  * @}
+  */
+    
+/* Include PCD HAL Extension module */
+#include "stm32f7xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+/** @defgroup PCD_Speed PCD Speed
+  * @{
+  */
+#define PCD_SPEED_HIGH               0U
+#define PCD_SPEED_HIGH_IN_FULL       1U
+#define PCD_SPEED_FULL               2U
+/**
+  * @}
+  */
+  
+/** @defgroup PCD_PHY_Module PCD PHY Module
+  * @{
+  */
+#define PCD_PHY_ULPI                 1U
+#define PCD_PHY_EMBEDDED             2U
+#define PCD_PHY_UTMI                 3U
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
+  * @{
+  */
+#ifndef USBD_HS_TRDT_VALUE
+ #define USBD_HS_TRDT_VALUE           9U
+#endif /* USBD_HS_TRDT_VALUE */
+#ifndef USBD_FS_TRDT_VALUE
+ #define USBD_FS_TRDT_VALUE           5U
+#endif /* USBD_HS_TRDT_VALUE */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__)                   USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__)                  USB_DisableGlobalInt ((__HANDLE__)->Instance)
+   
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__)             *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+                                                       ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__)               *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+                                                      
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__)            ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+                                                         
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE                ((uint32_t)0x08U) 
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE               ((uint32_t)0x0CU) 
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE        ((uint32_t)0x10U) 
+
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE                ((uint32_t)0x08U) 
+#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE               ((uint32_t)0x0CU) 
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE        ((uint32_t)0x10U) 
+
+#define USB_OTG_HS_WAKEUP_EXTI_LINE                       ((uint32_t)0x00100000U)  /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_OTG_FS_WAKEUP_EXTI_LINE                       ((uint32_t)0x00040000U)  /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                          EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE
+                                                      
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE()  EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                            EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()   EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                                    EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE;)\
+                                                                    EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+                                                                    EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT()   (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) 
+                                                                                                                    
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                          EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+
+                                                      
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE()  EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                            EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()  EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                                   EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                                   EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+                                                                   EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE 
+                                                         
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT()  (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)                                                     
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+/** @defgroup PCD_Instance_definition PCD Instance definition
+  * @{
+  */
+#define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+                                       ((INSTANCE) == USB_OTG_HS))
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd_ex.h
----------------------------------------------------------------------
diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd_ex.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd_ex.h
new file mode 100644
index 0000000..3b37abb
--- /dev/null
+++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pcd_ex.h
@@ -0,0 +1,116 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pcd_ex.h
+  * @author  MCD Application Team
+  * @version V1.2.0
+  * @date    30-December-2016
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PCD_EX_H
+#define __STM32F7xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+   
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCDEx
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+typedef enum  
+{
+  PCD_LPM_L0_ACTIVE = 0x00U, /* on */
+  PCD_LPM_L1_ACTIVE = 0x01U, /* LPM L1 sleep */
+}PCD_LPM_MsgTypeDef;
+
+typedef enum  
+{
+  PCD_BCD_ERROR                     = 0xFF, 
+  PCD_BCD_CONTACT_DETECTION         = 0xFE,
+  PCD_BCD_STD_DOWNSTREAM_PORT       = 0xFD,
+  PCD_BCD_CHARGING_DOWNSTREAM_PORT  = 0xFC,
+  PCD_BCD_DEDICATED_CHARGING_PORT   = 0xFB,
+  PCD_BCD_DISCOVERY_COMPLETED       = 0x00,
+  
+}PCD_BCD_MsgTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
+  * @{
+  */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
----------------------------------------------------------------------
diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
new file mode 100644
index 0000000..08b034b
--- /dev/null
+++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h
@@ -0,0 +1,422 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @version V1.2.0
+  * @date    30-December-2016
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_H
+#define __STM32F7xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */
+   
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
+                            This parameter can be a value of @ref PWR_PVD_detection_level */
+
+  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+  * @{
+  */ 
+#define PWR_PVDLEVEL_0                  PWR_CR1_PLS_LEV0
+#define PWR_PVDLEVEL_1                  PWR_CR1_PLS_LEV1
+#define PWR_PVDLEVEL_2                  PWR_CR1_PLS_LEV2
+#define PWR_PVDLEVEL_3                  PWR_CR1_PLS_LEV3
+#define PWR_PVDLEVEL_4                  PWR_CR1_PLS_LEV4
+#define PWR_PVDLEVEL_5                  PWR_CR1_PLS_LEV5
+#define PWR_PVDLEVEL_6                  PWR_CR1_PLS_LEV6
+#define PWR_PVDLEVEL_7                  PWR_CR1_PLS_LEV7/* External input analog voltage 
+                                                          (Compare internally to VREFINT) */
+
+/**
+  * @}
+  */   
+ 
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 ((uint32_t)0x00000000U)   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              ((uint32_t)0x00010001U)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             ((uint32_t)0x00010002U)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      ((uint32_t)0x00010003U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           ((uint32_t)0x00020001U)   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          ((uint32_t)0x00020002U)   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   ((uint32_t)0x00020003U)   /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000U)
+#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR1_LPDS
+/**
+  * @}
+  */
+    
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01U)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02U)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01U)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02U)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
+  * @{
+  */
+#define PWR_REGULATOR_VOLTAGE_SCALE1         PWR_CR1_VOS
+#define PWR_REGULATOR_VOLTAGE_SCALE2         PWR_CR1_VOS_1
+#define PWR_REGULATOR_VOLTAGE_SCALE3         PWR_CR1_VOS_0
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag PWR Flag
+  * @{
+  */
+#define PWR_FLAG_WU                     PWR_CSR1_WUIF
+#define PWR_FLAG_SB                     PWR_CSR1_SBF
+#define PWR_FLAG_PVDO                   PWR_CSR1_PVDO
+#define PWR_FLAG_BRR                    PWR_CSR1_BRR
+#define PWR_FLAG_VOSRDY                 PWR_CSR1_VOSRDY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+  * @{
+  */
+
+/** @brief  macros configure the main internal regulator output voltage.
+  * @param  __REGULATOR__: specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption when the device does
+  *         not operate at the maximum frequency (refer to the datasheets for more details).
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+  * @retval None
+  */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do {                                                     \
+                                                            __IO uint32_t tmpreg;                               \
+                                                            MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
+                                                            /* Delay after an RCC peripheral clock enabling */  \
+                                                            tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS);           \
+                                                            UNUSED(tmpreg);                                     \
+				                                                	} while(0)
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event 
+  *                  was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B),
+  *                  RTC Tamper event, RTC TimeStamp event or RTC Wakeup)).
+  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+  *                  resumed from StandBy mode.    
+  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled 
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode 
+  *                  For this reason, this bit is equal to 0 after Standby or reset
+  *                  until the PVDE bit is set.
+  *            @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset 
+  *                  when the device wakes up from Standby mode or by a system reset 
+  *                  or power reset.  
+  *            @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage 
+  *                 scaling output selection is ready.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the PWR's pending flags.
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_FLAG_SB: StandBy flag
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |=  (__FLAG__) << 2)
+
+/**
+  * @brief Enable the PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()   (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable the PVD EXTI Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()  (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()   SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  PVD EXTI line configuration: set rising & falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()   __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()  (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Clear the PVD Exti flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()  (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief  Generates a Software interrupt on PVD EXTI line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @}
+  */
+
+/* Include PWR HAL Extension module */
+#include "stm32f7xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+  
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+  * @}
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions  *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+  * @{
+  */
+#define PWR_EXTI_LINE_PVD  ((uint32_t)EXTI_IMR_IM16)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+  * @{
+  */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+  * @{
+  */
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+                              ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+                                           ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+                                           ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
----------------------------------------------------------------------
diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
new file mode 100644
index 0000000..072719a
--- /dev/null
+++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h
@@ -0,0 +1,280 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pwr_ex.h
+  * @author  MCD Application Team
+  * @version V1.2.0
+  * @date    30-December-2016
+  * @brief   Header file of PWR HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_EX_H
+#define __STM32F7xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWREx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+  * @{
+  */
+/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins
+  * @{
+  */
+#define PWR_WAKEUP_PIN1                PWR_CSR2_EWUP1
+#define PWR_WAKEUP_PIN2                PWR_CSR2_EWUP2
+#define PWR_WAKEUP_PIN3                PWR_CSR2_EWUP3
+#define PWR_WAKEUP_PIN4                PWR_CSR2_EWUP4
+#define PWR_WAKEUP_PIN5                PWR_CSR2_EWUP5
+#define PWR_WAKEUP_PIN6                PWR_CSR2_EWUP6
+#define PWR_WAKEUP_PIN1_HIGH           PWR_CSR2_EWUP1
+#define PWR_WAKEUP_PIN2_HIGH           PWR_CSR2_EWUP2
+#define PWR_WAKEUP_PIN3_HIGH           PWR_CSR2_EWUP3
+#define PWR_WAKEUP_PIN4_HIGH           PWR_CSR2_EWUP4
+#define PWR_WAKEUP_PIN5_HIGH           PWR_CSR2_EWUP5
+#define PWR_WAKEUP_PIN6_HIGH           PWR_CSR2_EWUP6
+#define PWR_WAKEUP_PIN1_LOW            (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1)
+#define PWR_WAKEUP_PIN2_LOW            (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2)
+#define PWR_WAKEUP_PIN3_LOW            (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3)
+#define PWR_WAKEUP_PIN4_LOW            (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4)
+#define PWR_WAKEUP_PIN5_LOW            (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5)
+#define PWR_WAKEUP_PIN6_LOW            (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6)
+
+/**
+  * @}
+  */
+	
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON                       PWR_CR1_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON                   ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS))
+/**
+  * @}
+  */ 
+  
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+  * @{
+  */
+#define PWR_FLAG_ODRDY                  PWR_CSR1_ODRDY
+#define PWR_FLAG_ODSWRDY                PWR_CSR1_ODSWRDY
+#define PWR_FLAG_UDRDY                  PWR_CSR1_UDRDY
+/**
+  * @}
+  */
+	
+/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags
+  * @{
+  */
+#define PWR_WAKEUP_PIN_FLAG1            PWR_CSR2_WUPF1
+#define PWR_WAKEUP_PIN_FLAG2            PWR_CSR2_WUPF2
+#define PWR_WAKEUP_PIN_FLAG3            PWR_CSR2_WUPF3
+#define PWR_WAKEUP_PIN_FLAG4            PWR_CSR2_WUPF4
+#define PWR_WAKEUP_PIN_FLAG5            PWR_CSR2_WUPF5
+#define PWR_WAKEUP_PIN_FLAG6            PWR_CSR2_WUPF6
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
+  *  @{
+  */
+/** @brief Macros to enable or disable the Over drive mode.
+  */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN))
+
+/** @brief Macros to enable or disable the Over drive switching.
+  */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN))
+
+/** @brief Macros to enable or disable the Under drive mode.
+  * @note  This mode is enabled only with STOP low power mode.
+  *        In this mode, the 1.2V domain is preserved in reduced leakage mode. This 
+  *        mode is only available when the main regulator or the low power regulator 
+  *        is in low voltage mode.      
+  * @note  If the Under-drive mode was enabled, it is automatically disabled after 
+  *        exiting Stop mode. 
+  *        When the voltage regulator operates in Under-drive mode, an additional  
+  *        startup delay is induced when waking up from Stop mode.
+  */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN))
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+  *                                 is ready 
+  *            @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+  *                                   switching is ready  
+  *            @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+  *                                 is enabled in Stop mode
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+  */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY)
+
+/** @brief  Check Wake Up flag is set or not.
+  * @param  __WUFLAG__: specifies the Wake Up flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
+  *            @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
+  *            @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
+  *            @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
+  *            @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
+  *            @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11          
+  */
+#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__))
+
+/** @brief  Clear the WakeUp pins flags.
+  * @param  __WUFLAG__: specifies the Wake Up pin flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
+  *            @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
+  *            @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
+  *            @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
+  *            @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
+  *            @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11          
+  */
+#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |=  (__WUFLAG__))
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+  *  @{
+  */
+ 
+/** @addtogroup PWREx_Exported_Functions_Group1
+  * @{
+  */
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void); 
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); 
+
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+  * @{
+  */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+  * @{
+  */
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+                                                ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#define IS_PWR_WAKEUP_PIN(__PIN__)         (((__PIN__) == PWR_WAKEUP_PIN1)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN2)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN3)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN4)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN5)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN6)  		 || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN1_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN2_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN3_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN4_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN5_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN6_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN1_LOW)   || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN2_LOW)   || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN3_LOW)   || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN4_LOW)   || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN5_LOW)	 || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN6_LOW))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h
----------------------------------------------------------------------
diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h
new file mode 100644
index 0000000..89d7e03
--- /dev/null
+++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h
@@ -0,0 +1,781 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_qspi.h
+  * @author  MCD Application Team
+  * @version V1.2.0
+  * @date    30-December-2016
+  * @brief   Header file of QSPI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_QSPI_H
+#define __STM32F7xx_HAL_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup QSPI
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup QSPI_Exported_Types QSPI Exported Types
+  * @{
+  */
+  
+/** 
+  * @brief  QSPI Init structure definition  
+  */
+
+typedef struct
+{
+  uint32_t ClockPrescaler;     /* Specifies the prescaler factor for generating clock based on the AHB clock.
+                                  This parameter can be a number between 0 and 255 */ 
+                                  
+  uint32_t FifoThreshold;      /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
+                                  This parameter can be a value between 1 and 32 */
+                                  
+  uint32_t SampleShifting;     /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to 
+                                  take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
+                                  This parameter can be a value of @ref QSPI_SampleShifting */
+                                  
+  uint32_t FlashSize;          /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits 
+                                  required to address the flash memory. The flash capacity can be up to 4GB 
+                                  (addressed using 32 bits) in indirect mode, but the addressable space in 
+                                  memory-mapped mode is limited to 256MB
+                                  This parameter can be a number between 0 and 31 */
+                                  
+  uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number 
+                                  of clock cycles which the chip select must remain high between commands.
+                                  This parameter can be a value of @ref QSPI_ChipSelectHighTime */ 
+                                    
+  uint32_t ClockMode;          /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
+                                  This parameter can be a value of @ref QSPI_ClockMode */
+                                 
+  uint32_t FlashID;            /* Specifies the Flash which will be used,
+                                  This parameter can be a value of @ref QSPI_Flash_Select */
+                                 
+  uint32_t DualFlash;          /* Specifies the Dual Flash Mode State
+                                  This parameter can be a value of @ref QSPI_DualFlash_Mode */                                               
+}QSPI_InitTypeDef;
+
+/** 
+  * @brief HAL QSPI State structures definition  
+  */ 
+typedef enum
+{
+  HAL_QSPI_STATE_RESET             = 0x00U,    /*!< Peripheral not initialized                            */
+  HAL_QSPI_STATE_READY             = 0x01U,    /*!< Peripheral initialized and ready for use              */
+  HAL_QSPI_STATE_BUSY              = 0x02U,    /*!< Peripheral in indirect mode and busy                  */ 
+  HAL_QSPI_STATE_BUSY_INDIRECT_TX  = 0x12U,    /*!< Peripheral in indirect mode with transmission ongoing */ 
+  HAL_QSPI_STATE_BUSY_INDIRECT_RX  = 0x22U,    /*!< Peripheral in indirect mode with reception ongoing    */
+  HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42U,    /*!< Peripheral in auto polling mode ongoing               */
+  HAL_QSPI_STATE_BUSY_MEM_MAPPED   = 0x82U,    /*!< Peripheral in memory mapped mode ongoing              */
+  HAL_QSPI_STATE_ABORT             = 0x08U,    /*!< Peripheral with abort request ongoing                 */
+  HAL_QSPI_STATE_ERROR             = 0x04U     /*!< Peripheral in error                                   */
+}HAL_QSPI_StateTypeDef;
+
+/** 
+  * @brief  QSPI Handle Structure definition  
+  */  
+typedef struct
+{
+  QUADSPI_TypeDef            *Instance;        /* QSPI registers base address        */
+  QSPI_InitTypeDef           Init;             /* QSPI communication parameters      */
+  uint8_t                    *pTxBuffPtr;      /* Pointer to QSPI Tx transfer Buffer */
+  __IO uint32_t              TxXferSize;       /* QSPI Tx Transfer size              */
+  __IO uint32_t              TxXferCount;      /* QSPI Tx Transfer Counter           */
+  uint8_t                    *pRxBuffPtr;      /* Pointer to QSPI Rx transfer Buffer */
+  __IO uint32_t              RxXferSize;       /* QSPI Rx Transfer size              */
+  __IO uint32_t              RxXferCount;      /* QSPI Rx Transfer Counter           */
+  DMA_HandleTypeDef          *hdma;            /* QSPI Rx/Tx DMA Handle parameters   */
+  __IO HAL_LockTypeDef       Lock;             /* Locking object                     */
+  __IO HAL_QSPI_StateTypeDef State;            /* QSPI communication state           */
+  __IO uint32_t              ErrorCode;        /* QSPI Error code                    */
+  uint32_t                   Timeout;          /* Timeout for the QSPI memory access */ 
+}QSPI_HandleTypeDef;
+
+/** 
+  * @brief  QSPI Command structure definition  
+  */
+typedef struct
+{
+  uint32_t Instruction;        /* Specifies the Instruction to be sent
+                                  This parameter can be a value (8-bit) between 0x00 and 0xFF */
+  uint32_t Address;            /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
+                                  This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+  uint32_t AlternateBytes;     /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
+                                  This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+  uint32_t AddressSize;        /* Specifies the Address Size
+                                  This parameter can be a value of @ref QSPI_AddressSize */
+  uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
+                                  This parameter can be a value of @ref QSPI_AlternateBytesSize */
+  uint32_t DummyCycles;        /* Specifies the Number of Dummy Cycles.
+                                  This parameter can be a number between 0 and 31 */
+  uint32_t InstructionMode;    /* Specifies the Instruction Mode
+                                  This parameter can be a value of @ref QSPI_InstructionMode */
+  uint32_t AddressMode;        /* Specifies the Address Mode
+                                  This parameter can be a value of @ref QSPI_AddressMode */
+  uint32_t AlternateByteMode;  /* Specifies the Alternate Bytes Mode
+                                  This parameter can be a value of @ref QSPI_AlternateBytesMode */
+  uint32_t DataMode;           /* Specifies the Data Mode (used for dummy cycles and data phases)
+                                  This parameter can be a value of @ref QSPI_DataMode */
+  uint32_t NbData;             /* Specifies the number of data to transfer. 
+                                  This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length 
+                                  until end of memory)*/
+  uint32_t DdrMode;            /* Specifies the double data rate mode for address, alternate byte and data phase
+                                  This parameter can be a value of @ref QSPI_DdrMode */
+  uint32_t DdrHoldHalfCycle;   /* Specifies the DDR hold half cycle. It delays the data output by one half of 
+                                  system clock in DDR mode.
+                                  This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
+  uint32_t SIOOMode;          /* Specifies the send instruction only once mode
+                                  This parameter can be a value of @ref QSPI_SIOOMode */
+}QSPI_CommandTypeDef;
+
+/** 
+  * @brief  QSPI Auto Polling mode configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t Match;              /* Specifies the value to be compared with the masked status register to get a match.
+                                  This parameter can be any value between 0 and 0xFFFFFFFF */
+  uint32_t Mask;               /* Specifies the mask to be applied to the status bytes received. 
+                                  This parameter can be any value between 0 and 0xFFFFFFFF */
+  uint32_t Interval;           /* Specifies the number of clock cycles between two read during automatic polling phases.
+                                  This parameter can be any value between 0 and 0xFFFF */
+  uint32_t StatusBytesSize;    /* Specifies the size of the status bytes received.
+                                  This parameter can be any value between 1 and 4 */
+  uint32_t MatchMode;          /* Specifies the method used for determining a match.
+                                  This parameter can be a value of @ref QSPI_MatchMode */
+  uint32_t AutomaticStop;      /* Specifies if automatic polling is stopped after a match.
+                                  This parameter can be a value of @ref QSPI_AutomaticStop */
+}QSPI_AutoPollingTypeDef;
+                           
+/** 
+  * @brief  QSPI Memory Mapped mode configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t TimeOutPeriod;      /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
+                                  This parameter can be any value between 0 and 0xFFFF */
+  uint32_t TimeOutActivation;  /* Specifies if the time out counter is enabled to release the chip select. 
+                                  This parameter can be a value of @ref QSPI_TimeOutActivation */
+}QSPI_MemoryMappedTypeDef;                                     
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
+  * @{
+  */
+/** @defgroup QSPI_ErrorCode QSPI Error Code
+  * @{
+  */ 
+#define HAL_QSPI_ERROR_NONE            ((uint32_t)0x00000000U) /*!< No error           */
+#define HAL_QSPI_ERROR_TIMEOUT         ((uint32_t)0x00000001U) /*!< Timeout error      */
+#define HAL_QSPI_ERROR_TRANSFER        ((uint32_t)0x00000002U) /*!< Transfer error     */
+#define HAL_QSPI_ERROR_DMA             ((uint32_t)0x00000004U) /*!< DMA transfer error */
+#define HAL_QSPI_ERROR_INVALID_PARAM   ((uint32_t)0x00000008U) /*!< Invalid parameters error */
+/**
+  * @}
+  */ 
+  
+/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
+  * @{
+  */
+#define QSPI_SAMPLE_SHIFTING_NONE           ((uint32_t)0x00000000U)        /*!<No clock cycle shift to sample data*/
+#define QSPI_SAMPLE_SHIFTING_HALFCYCLE      ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
+/**
+  * @}
+  */ 
+
+/** @defgroup QSPI_ChipSelectHighTime QSPI Chip Select High Time
+  * @{
+  */
+#define QSPI_CS_HIGH_TIME_1_CYCLE           ((uint32_t)0x00000000U)                              /*!<nCS stay high for at least 1 clock cycle between commands*/
+#define QSPI_CS_HIGH_TIME_2_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_0)                      /*!<nCS stay high for at least 2 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_3_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_1)                      /*!<nCS stay high for at least 3 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_4_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_5_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2)                      /*!<nCS stay high for at least 5 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_6_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_7_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_8_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT)                        /*!<nCS stay high for at least 8 clock cycles between commands*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_ClockMode QSPI Clock Mode
+  * @{
+  */
+#define QSPI_CLOCK_MODE_0                   ((uint32_t)0x00000000U)         /*!<Clk stays low while nCS is released*/
+#define QSPI_CLOCK_MODE_3                   ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
+/**
+  * @}
+  */
+  
+/** @defgroup QSPI_Flash_Select QSPI Flash Select
+  * @{
+  */
+#define QSPI_FLASH_ID_1           ((uint32_t)0x00000000U)
+#define QSPI_FLASH_ID_2           ((uint32_t)QUADSPI_CR_FSEL)
+/**
+  * @}
+  */  
+
+  /** @defgroup QSPI_DualFlash_Mode  QSPI Dual Flash Mode
+  * @{
+  */
+#define QSPI_DUALFLASH_ENABLE            ((uint32_t)QUADSPI_CR_DFM)
+#define QSPI_DUALFLASH_DISABLE           ((uint32_t)0x00000000U) 
+/**
+  * @}
+  */ 
+
+/** @defgroup QSPI_AddressSize QSPI Address Size 
+  * @{
+  */
+#define QSPI_ADDRESS_8_BITS            ((uint32_t)0x00000000U)           /*!<8-bit address*/
+#define QSPI_ADDRESS_16_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
+#define QSPI_ADDRESS_24_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
+#define QSPI_ADDRESS_32_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE)   /*!<32-bit address*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
+  * @{
+  */
+#define QSPI_ALTERNATE_BYTES_8_BITS    ((uint32_t)0x00000000U)           /*!<8-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_16_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_24_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_32_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE)   /*!<32-bit alternate bytes*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
+* @{
+*/
+#define QSPI_INSTRUCTION_NONE          ((uint32_t)0x00000000U)          /*!<No instruction*/
+#define QSPI_INSTRUCTION_1_LINE        ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
+#define QSPI_INSTRUCTION_2_LINES       ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
+#define QSPI_INSTRUCTION_4_LINES       ((uint32_t)QUADSPI_CCR_IMODE)   /*!<Instruction on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AddressMode QSPI Address Mode
+* @{
+*/
+#define QSPI_ADDRESS_NONE              ((uint32_t)0x00000000U)           /*!<No address*/
+#define QSPI_ADDRESS_1_LINE            ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
+#define QSPI_ADDRESS_2_LINES           ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
+#define QSPI_ADDRESS_4_LINES           ((uint32_t)QUADSPI_CCR_ADMODE)   /*!<Address on four lines*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_AlternateBytesMode  QSPI Alternate Bytes Mode
+* @{                                  
+*/
+#define QSPI_ALTERNATE_BYTES_NONE      ((uint32_t)0x00000000U)           /*!<No alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_1_LINE    ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
+#define QSPI_ALTERNATE_BYTES_2_LINES   ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
+#define QSPI_ALTERNATE_BYTES_4_LINES   ((uint32_t)QUADSPI_CCR_ABMODE)   /*!<Alternate bytes on four lines*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_DataMode QSPI Data Mode
+  * @{
+  */
+#define QSPI_DATA_NONE                 ((uint32_t)0X00000000)           /*!<No data*/
+#define QSPI_DATA_1_LINE               ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
+#define QSPI_DATA_2_LINES              ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
+#define QSPI_DATA_4_LINES              ((uint32_t)QUADSPI_CCR_DMODE)   /*!<Data on four lines*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_DdrMode QSPI Ddr Mode
+  * @{
+  */
+#define QSPI_DDR_MODE_DISABLE              ((uint32_t)0x00000000U)       /*!<Double data rate mode disabled*/
+#define QSPI_DDR_MODE_ENABLE               ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_DdrHoldHalfCycle QSPI Ddr HoldHalfCycle
+  * @{
+  */
+#define QSPI_DDR_HHC_ANALOG_DELAY           ((uint32_t)0x00000000U)       /*!<Delay the data output using analog delay in DDR mode*/
+#define QSPI_DDR_HHC_HALF_CLK_DELAY         ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_SIOOMode QSPI SIOO Mode
+  * @{
+  */
+#define QSPI_SIOO_INST_EVERY_CMD       ((uint32_t)0x00000000U)       /*!<Send instruction on every transaction*/
+#define QSPI_SIOO_INST_ONLY_FIRST_CMD  ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_MatchMode QSPI Match Mode
+  * @{
+  */
+#define QSPI_MATCH_MODE_AND                 ((uint32_t)0x00000000U)     /*!<AND match mode between unmasked bits*/
+#define QSPI_MATCH_MODE_OR                  ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
+  * @{
+  */
+#define QSPI_AUTOMATIC_STOP_DISABLE        ((uint32_t)0x00000000U)      /*!<AutoPolling stops only with abort or QSPI disabling*/
+#define QSPI_AUTOMATIC_STOP_ENABLE         ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_TimeOutActivation QSPI TimeOut Activation
+  * @{
+  */
+#define QSPI_TIMEOUT_COUNTER_DISABLE       ((uint32_t)0x00000000U)      /*!<Timeout counter disabled, nCS remains active*/
+#define QSPI_TIMEOUT_COUNTER_ENABLE        ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_Flags  QSPI Flags
+  * @{
+  */
+#define QSPI_FLAG_BUSY                 QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
+#define QSPI_FLAG_TO                   QUADSPI_SR_TOF  /*!<Timeout flag: timeout occurs in memory-mapped mode*/
+#define QSPI_FLAG_SM                   QUADSPI_SR_SMF  /*!<Status match flag: received data matches in autopolling mode*/
+#define QSPI_FLAG_FT                   QUADSPI_SR_FTF  /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
+#define QSPI_FLAG_TC                   QUADSPI_SR_TCF  /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
+#define QSPI_FLAG_TE                   QUADSPI_SR_TEF  /*!<Transfer error flag: invalid address is being accessed*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Interrupts  QSPI Interrupts
+  * @{
+  */  
+#define QSPI_IT_TO                          QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
+#define QSPI_IT_SM                          QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
+#define QSPI_IT_FT                          QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
+#define QSPI_IT_TC                          QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
+#define QSPI_IT_TE                          QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
+  * @{
+  */ 
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000)/* 5 s */
+/**
+  * @}
+  */  
+    
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
+  * @{
+  */
+
+/** @brief Reset QSPI handle state
+  * @param  __HANDLE__: QSPI handle.
+  * @retval None
+  */
+#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__)           ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
+
+/** @brief  Enable QSPI
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @retval None
+  */ 
+#define __HAL_QSPI_ENABLE(__HANDLE__)                       SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief  Disable QSPI
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @retval None
+  */
+#define __HAL_QSPI_DISABLE(__HANDLE__)                      CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief  Enables the specified QSPI interrupt.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Time out interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval None
+  */
+#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)     SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+
+/** @brief  Disables the specified QSPI interrupt.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Timeout interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval None
+  */
+#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)    CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+/** @brief  Checks whether the specified QSPI interrupt source is enabled.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Time out interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__)) 
+
+/**
+  * @brief  Get the selected QSPI's flag status.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __FLAG__: specifies the QSPI flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_FLAG_BUSY: QSPI Busy flag
+  *            @arg QSPI_FLAG_TO:   QSPI Time out flag
+  *            @arg QSPI_FLAG_SM:   QSPI Status match flag
+  *            @arg QSPI_FLAG_FT:   QSPI FIFO threshold flag
+  *            @arg QSPI_FLAG_TC:   QSPI Transfer complete flag
+  *            @arg QSPI_FLAG_TE:   QSPI Transfer error flag
+  * @retval None
+  */
+#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__)           (READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0)
+
+/** @brief  Clears the specified QSPI's flag status.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __FLAG__: specifies the QSPI clear register flag that needs to be set
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_FLAG_TO: QSPI Time out flag
+  *            @arg QSPI_FLAG_SM: QSPI Status match flag
+  *            @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+  *            @arg QSPI_FLAG_TE: QSPI Transfer error flag
+  * @retval None
+  */
+#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__)         WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup QSPI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef     HAL_QSPI_Init     (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_DeInit   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_MspInit  (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group2
+  * @{
+  */  
+/* IO operation functions *****************************************************/
+/* QSPI IRQ handler method */
+void                  HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+HAL_StatusTypeDef     HAL_QSPI_Command      (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Transmit     (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Receive      (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Command_IT   (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
+HAL_StatusTypeDef     HAL_QSPI_Transmit_IT  (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Receive_IT   (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Receive_DMA  (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+
+/* QSPI status flag polling mode */
+HAL_StatusTypeDef     HAL_QSPI_AutoPolling   (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
+
+/* QSPI memory-mapped mode */
+HAL_StatusTypeDef     HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group3
+  * @{
+  */  
+/* Callback functions in non-blocking modes ***********************************/
+void                  HAL_QSPI_ErrorCallback        (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_AbortCpltCallback    (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+void                  HAL_QSPI_CmdCpltCallback      (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_RxCpltCallback       (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_TxCpltCallback       (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_RxHalfCpltCallback   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_TxHalfCpltCallback   (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI status flag polling mode */
+void                  HAL_QSPI_StatusMatchCallback  (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI memory-mapped mode */
+void                  HAL_QSPI_TimeOutCallback      (QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group4
+  * @{
+  */  
+/* Peripheral Control and State functions  ************************************/
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState        (QSPI_HandleTypeDef *hqspi);
+uint32_t              HAL_QSPI_GetError        (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_Abort           (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_Abort_IT        (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_SetTimeout      (QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold);
+uint32_t              HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup QSPI_Private_Macros QSPI Private Macros
+  * @{
+  */
+/** @defgroup QSPI_ClockPrescaler QSPI Clock Prescaler
+  * @{
+  */ 
+#define IS_QSPI_CLOCK_PRESCALER(PRESCALER)  ((PRESCALER) <= 0xFF)
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_FifoThreshold  QSPI Fifo Threshold 
+  * @{
+  */
+#define IS_QSPI_FIFO_THRESHOLD(THR)         (((THR) > 0) && ((THR) <= 32))
+/**
+  * @}
+  */
+  
+#define IS_QSPI_SSHIFT(SSHIFT)              (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
+                                             ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE)) 
+
+/** @defgroup QSPI_FlashSize QSPI Flash Size
+  * @{
+  */
+#define IS_QSPI_FLASH_SIZE(FSIZE)           (((FSIZE) <= 31))
+/**
+  * @}
+  */
+  
+#define IS_QSPI_CS_HIGH_TIME(CSHTIME)       (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))   
+
+#define IS_QSPI_CLOCK_MODE(CLKMODE)         (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
+                                             ((CLKMODE) == QSPI_CLOCK_MODE_3))
+
+#define IS_QSPI_FLASH_ID(FLA)    (((FLA) == QSPI_FLASH_ID_1) || \
+                                  ((FLA) == QSPI_FLASH_ID_2)) 
+                                  
+#define IS_QSPI_DUAL_FLASH_MODE(MODE)    (((MODE) == QSPI_DUALFLASH_ENABLE) || \
+                                          ((MODE) == QSPI_DUALFLASH_DISABLE))
+                                          
+  
+/** @defgroup QSPI_Instruction QSPI Instruction
+  * @{
+  */
+#define IS_QSPI_INSTRUCTION(INSTRUCTION)    ((INSTRUCTION) <= 0xFF) 
+/**
+  * @}
+  */ 
+
+#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE)     (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS)  || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
+
+#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE)  (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS)  || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))                                               
+
+
+/** @defgroup QSPI_DummyCycles QSPI Dummy Cycles
+  * @{
+  */
+#define IS_QSPI_DUMMY_CYCLES(DCY)           ((DCY) <= 31) 
+/**
+  * @}
+  */
+
+#define IS_QSPI_INSTRUCTION_MODE(MODE)      (((MODE) == QSPI_INSTRUCTION_NONE)    || \
+                                             ((MODE) == QSPI_INSTRUCTION_1_LINE)  || \
+                                             ((MODE) == QSPI_INSTRUCTION_2_LINES) || \
+                                             ((MODE) == QSPI_INSTRUCTION_4_LINES))  
+
+#define IS_QSPI_ADDRESS_MODE(MODE)          (((MODE) == QSPI_ADDRESS_NONE)    || \
+                                             ((MODE) == QSPI_ADDRESS_1_LINE)  || \
+                                             ((MODE) == QSPI_ADDRESS_2_LINES) || \
+                                             ((MODE) == QSPI_ADDRESS_4_LINES))
+
+#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE)  (((MODE) == QSPI_ALTERNATE_BYTES_NONE)    || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE)  || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
+
+#define IS_QSPI_DATA_MODE(MODE)             (((MODE) == QSPI_DATA_NONE)    || \
+                                             ((MODE) == QSPI_DATA_1_LINE)  || \
+                                             ((MODE) == QSPI_DATA_2_LINES) || \
+                                             ((MODE) == QSPI_DATA_4_LINES))
+
+#define IS_QSPI_DDR_MODE(DDR_MODE)          (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
+                                             ((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
+
+#define IS_QSPI_DDR_HHC(DDR_HHC)            (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
+                                             ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
+
+#define IS_QSPI_SIOO_MODE(SIOO_MODE)      (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
+                                             ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
+
+/** @defgroup QSPI_Interval QSPI Interval 
+  * @{
+  */
+#define IS_QSPI_INTERVAL(INTERVAL)        ((INTERVAL) <= QUADSPI_PIR_INTERVAL) 
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_StatusBytesSize QSPI Status Bytes Size
+  * @{
+  */
+#define IS_QSPI_STATUS_BYTES_SIZE(SIZE)   (((SIZE) >= 1) && ((SIZE) <= 4)) 
+/**
+  * @}
+  */
+#define IS_QSPI_MATCH_MODE(MODE)            (((MODE) == QSPI_MATCH_MODE_AND) || \
+                                             ((MODE) == QSPI_MATCH_MODE_OR)) 
+                                             
+#define IS_QSPI_AUTOMATIC_STOP(APMS)        (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
+                                             ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))                                                                                                                                                                                                                                    
+
+#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN)    (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
+                                             ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE)) 
+
+/** @defgroup QSPI_TimeOutPeriod  QSPI TimeOut Period
+  * @{
+  */
+#define IS_QSPI_TIMEOUT_PERIOD(PERIOD)      ((PERIOD) <= 0xFFFF) 
+/**
+  * @}
+  */
+
+#define IS_QSPI_GET_FLAG(FLAG)              (((FLAG) == QSPI_FLAG_BUSY) || \
+                                             ((FLAG) == QSPI_FLAG_TO)   || \
+                                             ((FLAG) == QSPI_FLAG_SM)   || \
+                                             ((FLAG) == QSPI_FLAG_FT)   || \
+                                             ((FLAG) == QSPI_FLAG_TC)   || \
+                                             ((FLAG) == QSPI_FLAG_TE))    
+
+#define IS_QSPI_IT(IT)                      ((((IT) & (uint32_t)0xFFE0FFFFU) == 0x00000000U) && ((IT) != 0x00000000U))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Functions QSPI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_QSPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/


Mime
View raw message