mynewt-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From ccoll...@apache.org
Subject [14/70] [abbrv] [partial] incubator-mynewt-larva git commit: Arduino zero BSP and Atmel MCU in a different repository.
Date Fri, 04 Mar 2016 00:39:54 GMT
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-larva/blob/a280628a/hw/mcu/atmel/samd21xx/src/sam0/utils/cmsis/samd21/include/component/sercom.h
----------------------------------------------------------------------
diff --git a/hw/mcu/atmel/samd21xx/src/sam0/utils/cmsis/samd21/include/component/sercom.h b/hw/mcu/atmel/samd21xx/src/sam0/utils/cmsis/samd21/include/component/sercom.h
deleted file mode 100755
index d26df24..0000000
--- a/hw/mcu/atmel/samd21xx/src/sam0/utils/cmsis/samd21/include/component/sercom.h
+++ /dev/null
@@ -1,1511 +0,0 @@
-/**
- * \file
- *
- * \brief Component description for SERCOM
- *
- * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- *    Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-/*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
- */
-
-#ifndef _SAMD21_SERCOM_COMPONENT_
-#define _SAMD21_SERCOM_COMPONENT_
-
-/* ========================================================================== */
-/**  SOFTWARE API DEFINITION FOR SERCOM */
-/* ========================================================================== */
-/** \addtogroup SAMD21_SERCOM Serial Communication Interface */
-/*@{*/
-
-#define SERCOM_U2201
-#define REV_SERCOM                  0x201
-
-/* -------- SERCOM_I2CM_CTRLA : (SERCOM Offset: 0x00) (R/W 32) I2CM I2CM Control A -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t SWRST:1;          /*!< bit:      0  Software Reset                     */
-    uint32_t ENABLE:1;         /*!< bit:      1  Enable                             */
-    uint32_t MODE:3;           /*!< bit:  2.. 4  Operating Mode                     */
-    uint32_t :2;               /*!< bit:  5.. 6  Reserved                           */
-    uint32_t RUNSTDBY:1;       /*!< bit:      7  Run in Standby                     */
-    uint32_t :8;               /*!< bit:  8..15  Reserved                           */
-    uint32_t PINOUT:1;         /*!< bit:     16  Pin Usage                          */
-    uint32_t :3;               /*!< bit: 17..19  Reserved                           */
-    uint32_t SDAHOLD:2;        /*!< bit: 20..21  SDA Hold Time                      */
-    uint32_t MEXTTOEN:1;       /*!< bit:     22  Master SCL Low Extend Timeout      */
-    uint32_t SEXTTOEN:1;       /*!< bit:     23  Slave SCL Low Extend Timeout       */
-    uint32_t SPEED:2;          /*!< bit: 24..25  Transfer Speed                     */
-    uint32_t :1;               /*!< bit:     26  Reserved                           */
-    uint32_t SCLSM:1;          /*!< bit:     27  SCL Clock Stretch Mode             */
-    uint32_t INACTOUT:2;       /*!< bit: 28..29  Inactive Time-Out                  */
-    uint32_t LOWTOUTEN:1;      /*!< bit:     30  SCL Low Timeout Enable             */
-    uint32_t :1;               /*!< bit:     31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CM_CTRLA_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CM_CTRLA_OFFSET    0x00         /**< \brief (SERCOM_I2CM_CTRLA offset) I2CM Control A */
-#define SERCOM_I2CM_CTRLA_RESETVALUE 0x00000000ul /**< \brief (SERCOM_I2CM_CTRLA reset_value) I2CM Control A */
-
-#define SERCOM_I2CM_CTRLA_SWRST_Pos 0            /**< \brief (SERCOM_I2CM_CTRLA) Software Reset */
-#define SERCOM_I2CM_CTRLA_SWRST     (0x1ul << SERCOM_I2CM_CTRLA_SWRST_Pos)
-#define SERCOM_I2CM_CTRLA_ENABLE_Pos 1            /**< \brief (SERCOM_I2CM_CTRLA) Enable */
-#define SERCOM_I2CM_CTRLA_ENABLE    (0x1ul << SERCOM_I2CM_CTRLA_ENABLE_Pos)
-#define SERCOM_I2CM_CTRLA_MODE_Pos  2            /**< \brief (SERCOM_I2CM_CTRLA) Operating Mode */
-#define SERCOM_I2CM_CTRLA_MODE_Msk  (0x7ul << SERCOM_I2CM_CTRLA_MODE_Pos)
-#define SERCOM_I2CM_CTRLA_MODE(value) ((SERCOM_I2CM_CTRLA_MODE_Msk & ((value) << SERCOM_I2CM_CTRLA_MODE_Pos)))
-#define   SERCOM_I2CM_CTRLA_MODE_USART_EXT_CLK_Val 0x0ul  /**< \brief (SERCOM_I2CM_CTRLA) USART mode with external clock */
-#define   SERCOM_I2CM_CTRLA_MODE_USART_INT_CLK_Val 0x1ul  /**< \brief (SERCOM_I2CM_CTRLA) USART mode with internal clock */
-#define   SERCOM_I2CM_CTRLA_MODE_SPI_SLAVE_Val 0x2ul  /**< \brief (SERCOM_I2CM_CTRLA) SPI mode with external clock */
-#define   SERCOM_I2CM_CTRLA_MODE_SPI_MASTER_Val 0x3ul  /**< \brief (SERCOM_I2CM_CTRLA) SPI mode with internal clock */
-#define   SERCOM_I2CM_CTRLA_MODE_I2C_SLAVE_Val 0x4ul  /**< \brief (SERCOM_I2CM_CTRLA) I2C mode with external clock */
-#define   SERCOM_I2CM_CTRLA_MODE_I2C_MASTER_Val 0x5ul  /**< \brief (SERCOM_I2CM_CTRLA) I2C mode with internal clock */
-#define SERCOM_I2CM_CTRLA_MODE_USART_EXT_CLK (SERCOM_I2CM_CTRLA_MODE_USART_EXT_CLK_Val << SERCOM_I2CM_CTRLA_MODE_Pos)
-#define SERCOM_I2CM_CTRLA_MODE_USART_INT_CLK (SERCOM_I2CM_CTRLA_MODE_USART_INT_CLK_Val << SERCOM_I2CM_CTRLA_MODE_Pos)
-#define SERCOM_I2CM_CTRLA_MODE_SPI_SLAVE (SERCOM_I2CM_CTRLA_MODE_SPI_SLAVE_Val << SERCOM_I2CM_CTRLA_MODE_Pos)
-#define SERCOM_I2CM_CTRLA_MODE_SPI_MASTER (SERCOM_I2CM_CTRLA_MODE_SPI_MASTER_Val << SERCOM_I2CM_CTRLA_MODE_Pos)
-#define SERCOM_I2CM_CTRLA_MODE_I2C_SLAVE (SERCOM_I2CM_CTRLA_MODE_I2C_SLAVE_Val << SERCOM_I2CM_CTRLA_MODE_Pos)
-#define SERCOM_I2CM_CTRLA_MODE_I2C_MASTER (SERCOM_I2CM_CTRLA_MODE_I2C_MASTER_Val << SERCOM_I2CM_CTRLA_MODE_Pos)
-#define SERCOM_I2CM_CTRLA_RUNSTDBY_Pos 7            /**< \brief (SERCOM_I2CM_CTRLA) Run in Standby */
-#define SERCOM_I2CM_CTRLA_RUNSTDBY  (0x1ul << SERCOM_I2CM_CTRLA_RUNSTDBY_Pos)
-#define SERCOM_I2CM_CTRLA_PINOUT_Pos 16           /**< \brief (SERCOM_I2CM_CTRLA) Pin Usage */
-#define SERCOM_I2CM_CTRLA_PINOUT    (0x1ul << SERCOM_I2CM_CTRLA_PINOUT_Pos)
-#define SERCOM_I2CM_CTRLA_SDAHOLD_Pos 20           /**< \brief (SERCOM_I2CM_CTRLA) SDA Hold Time */
-#define SERCOM_I2CM_CTRLA_SDAHOLD_Msk (0x3ul << SERCOM_I2CM_CTRLA_SDAHOLD_Pos)
-#define SERCOM_I2CM_CTRLA_SDAHOLD(value) ((SERCOM_I2CM_CTRLA_SDAHOLD_Msk & ((value) << SERCOM_I2CM_CTRLA_SDAHOLD_Pos)))
-#define SERCOM_I2CM_CTRLA_MEXTTOEN_Pos 22           /**< \brief (SERCOM_I2CM_CTRLA) Master SCL Low Extend Timeout */
-#define SERCOM_I2CM_CTRLA_MEXTTOEN  (0x1ul << SERCOM_I2CM_CTRLA_MEXTTOEN_Pos)
-#define SERCOM_I2CM_CTRLA_SEXTTOEN_Pos 23           /**< \brief (SERCOM_I2CM_CTRLA) Slave SCL Low Extend Timeout */
-#define SERCOM_I2CM_CTRLA_SEXTTOEN  (0x1ul << SERCOM_I2CM_CTRLA_SEXTTOEN_Pos)
-#define SERCOM_I2CM_CTRLA_SPEED_Pos 24           /**< \brief (SERCOM_I2CM_CTRLA) Transfer Speed */
-#define SERCOM_I2CM_CTRLA_SPEED_Msk (0x3ul << SERCOM_I2CM_CTRLA_SPEED_Pos)
-#define SERCOM_I2CM_CTRLA_SPEED(value) ((SERCOM_I2CM_CTRLA_SPEED_Msk & ((value) << SERCOM_I2CM_CTRLA_SPEED_Pos)))
-#define SERCOM_I2CM_CTRLA_SCLSM_Pos 27           /**< \brief (SERCOM_I2CM_CTRLA) SCL Clock Stretch Mode */
-#define SERCOM_I2CM_CTRLA_SCLSM     (0x1ul << SERCOM_I2CM_CTRLA_SCLSM_Pos)
-#define SERCOM_I2CM_CTRLA_INACTOUT_Pos 28           /**< \brief (SERCOM_I2CM_CTRLA) Inactive Time-Out */
-#define SERCOM_I2CM_CTRLA_INACTOUT_Msk (0x3ul << SERCOM_I2CM_CTRLA_INACTOUT_Pos)
-#define SERCOM_I2CM_CTRLA_INACTOUT(value) ((SERCOM_I2CM_CTRLA_INACTOUT_Msk & ((value) << SERCOM_I2CM_CTRLA_INACTOUT_Pos)))
-#define SERCOM_I2CM_CTRLA_LOWTOUTEN_Pos 30           /**< \brief (SERCOM_I2CM_CTRLA) SCL Low Timeout Enable */
-#define SERCOM_I2CM_CTRLA_LOWTOUTEN (0x1ul << SERCOM_I2CM_CTRLA_LOWTOUTEN_Pos)
-#define SERCOM_I2CM_CTRLA_MASK      0x7BF1009Ful /**< \brief (SERCOM_I2CM_CTRLA) MASK Register */
-
-/* -------- SERCOM_I2CS_CTRLA : (SERCOM Offset: 0x00) (R/W 32) I2CS I2CS Control A -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t SWRST:1;          /*!< bit:      0  Software Reset                     */
-    uint32_t ENABLE:1;         /*!< bit:      1  Enable                             */
-    uint32_t MODE:3;           /*!< bit:  2.. 4  Operating Mode                     */
-    uint32_t :2;               /*!< bit:  5.. 6  Reserved                           */
-    uint32_t RUNSTDBY:1;       /*!< bit:      7  Run during Standby                 */
-    uint32_t :8;               /*!< bit:  8..15  Reserved                           */
-    uint32_t PINOUT:1;         /*!< bit:     16  Pin Usage                          */
-    uint32_t :3;               /*!< bit: 17..19  Reserved                           */
-    uint32_t SDAHOLD:2;        /*!< bit: 20..21  SDA Hold Time                      */
-    uint32_t :1;               /*!< bit:     22  Reserved                           */
-    uint32_t SEXTTOEN:1;       /*!< bit:     23  Slave SCL Low Extend Timeout       */
-    uint32_t SPEED:2;          /*!< bit: 24..25  Transfer Speed                     */
-    uint32_t :1;               /*!< bit:     26  Reserved                           */
-    uint32_t SCLSM:1;          /*!< bit:     27  SCL Clock Stretch Mode             */
-    uint32_t :2;               /*!< bit: 28..29  Reserved                           */
-    uint32_t LOWTOUTEN:1;      /*!< bit:     30  SCL Low Timeout Enable             */
-    uint32_t :1;               /*!< bit:     31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CS_CTRLA_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CS_CTRLA_OFFSET    0x00         /**< \brief (SERCOM_I2CS_CTRLA offset) I2CS Control A */
-#define SERCOM_I2CS_CTRLA_RESETVALUE 0x00000000ul /**< \brief (SERCOM_I2CS_CTRLA reset_value) I2CS Control A */
-
-#define SERCOM_I2CS_CTRLA_SWRST_Pos 0            /**< \brief (SERCOM_I2CS_CTRLA) Software Reset */
-#define SERCOM_I2CS_CTRLA_SWRST     (0x1ul << SERCOM_I2CS_CTRLA_SWRST_Pos)
-#define SERCOM_I2CS_CTRLA_ENABLE_Pos 1            /**< \brief (SERCOM_I2CS_CTRLA) Enable */
-#define SERCOM_I2CS_CTRLA_ENABLE    (0x1ul << SERCOM_I2CS_CTRLA_ENABLE_Pos)
-#define SERCOM_I2CS_CTRLA_MODE_Pos  2            /**< \brief (SERCOM_I2CS_CTRLA) Operating Mode */
-#define SERCOM_I2CS_CTRLA_MODE_Msk  (0x7ul << SERCOM_I2CS_CTRLA_MODE_Pos)
-#define SERCOM_I2CS_CTRLA_MODE(value) ((SERCOM_I2CS_CTRLA_MODE_Msk & ((value) << SERCOM_I2CS_CTRLA_MODE_Pos)))
-#define   SERCOM_I2CS_CTRLA_MODE_USART_EXT_CLK_Val 0x0ul  /**< \brief (SERCOM_I2CS_CTRLA) USART mode with external clock */
-#define   SERCOM_I2CS_CTRLA_MODE_USART_INT_CLK_Val 0x1ul  /**< \brief (SERCOM_I2CS_CTRLA) USART mode with internal clock */
-#define   SERCOM_I2CS_CTRLA_MODE_SPI_SLAVE_Val 0x2ul  /**< \brief (SERCOM_I2CS_CTRLA) SPI mode with external clock */
-#define   SERCOM_I2CS_CTRLA_MODE_SPI_MASTER_Val 0x3ul  /**< \brief (SERCOM_I2CS_CTRLA) SPI mode with internal clock */
-#define   SERCOM_I2CS_CTRLA_MODE_I2C_SLAVE_Val 0x4ul  /**< \brief (SERCOM_I2CS_CTRLA) I2C mode with external clock */
-#define   SERCOM_I2CS_CTRLA_MODE_I2C_MASTER_Val 0x5ul  /**< \brief (SERCOM_I2CS_CTRLA) I2C mode with internal clock */
-#define SERCOM_I2CS_CTRLA_MODE_USART_EXT_CLK (SERCOM_I2CS_CTRLA_MODE_USART_EXT_CLK_Val << SERCOM_I2CS_CTRLA_MODE_Pos)
-#define SERCOM_I2CS_CTRLA_MODE_USART_INT_CLK (SERCOM_I2CS_CTRLA_MODE_USART_INT_CLK_Val << SERCOM_I2CS_CTRLA_MODE_Pos)
-#define SERCOM_I2CS_CTRLA_MODE_SPI_SLAVE (SERCOM_I2CS_CTRLA_MODE_SPI_SLAVE_Val << SERCOM_I2CS_CTRLA_MODE_Pos)
-#define SERCOM_I2CS_CTRLA_MODE_SPI_MASTER (SERCOM_I2CS_CTRLA_MODE_SPI_MASTER_Val << SERCOM_I2CS_CTRLA_MODE_Pos)
-#define SERCOM_I2CS_CTRLA_MODE_I2C_SLAVE (SERCOM_I2CS_CTRLA_MODE_I2C_SLAVE_Val << SERCOM_I2CS_CTRLA_MODE_Pos)
-#define SERCOM_I2CS_CTRLA_MODE_I2C_MASTER (SERCOM_I2CS_CTRLA_MODE_I2C_MASTER_Val << SERCOM_I2CS_CTRLA_MODE_Pos)
-#define SERCOM_I2CS_CTRLA_RUNSTDBY_Pos 7            /**< \brief (SERCOM_I2CS_CTRLA) Run during Standby */
-#define SERCOM_I2CS_CTRLA_RUNSTDBY  (0x1ul << SERCOM_I2CS_CTRLA_RUNSTDBY_Pos)
-#define SERCOM_I2CS_CTRLA_PINOUT_Pos 16           /**< \brief (SERCOM_I2CS_CTRLA) Pin Usage */
-#define SERCOM_I2CS_CTRLA_PINOUT    (0x1ul << SERCOM_I2CS_CTRLA_PINOUT_Pos)
-#define SERCOM_I2CS_CTRLA_SDAHOLD_Pos 20           /**< \brief (SERCOM_I2CS_CTRLA) SDA Hold Time */
-#define SERCOM_I2CS_CTRLA_SDAHOLD_Msk (0x3ul << SERCOM_I2CS_CTRLA_SDAHOLD_Pos)
-#define SERCOM_I2CS_CTRLA_SDAHOLD(value) ((SERCOM_I2CS_CTRLA_SDAHOLD_Msk & ((value) << SERCOM_I2CS_CTRLA_SDAHOLD_Pos)))
-#define SERCOM_I2CS_CTRLA_SEXTTOEN_Pos 23           /**< \brief (SERCOM_I2CS_CTRLA) Slave SCL Low Extend Timeout */
-#define SERCOM_I2CS_CTRLA_SEXTTOEN  (0x1ul << SERCOM_I2CS_CTRLA_SEXTTOEN_Pos)
-#define SERCOM_I2CS_CTRLA_SPEED_Pos 24           /**< \brief (SERCOM_I2CS_CTRLA) Transfer Speed */
-#define SERCOM_I2CS_CTRLA_SPEED_Msk (0x3ul << SERCOM_I2CS_CTRLA_SPEED_Pos)
-#define SERCOM_I2CS_CTRLA_SPEED(value) ((SERCOM_I2CS_CTRLA_SPEED_Msk & ((value) << SERCOM_I2CS_CTRLA_SPEED_Pos)))
-#define SERCOM_I2CS_CTRLA_SCLSM_Pos 27           /**< \brief (SERCOM_I2CS_CTRLA) SCL Clock Stretch Mode */
-#define SERCOM_I2CS_CTRLA_SCLSM     (0x1ul << SERCOM_I2CS_CTRLA_SCLSM_Pos)
-#define SERCOM_I2CS_CTRLA_LOWTOUTEN_Pos 30           /**< \brief (SERCOM_I2CS_CTRLA) SCL Low Timeout Enable */
-#define SERCOM_I2CS_CTRLA_LOWTOUTEN (0x1ul << SERCOM_I2CS_CTRLA_LOWTOUTEN_Pos)
-#define SERCOM_I2CS_CTRLA_MASK      0x4BB1009Ful /**< \brief (SERCOM_I2CS_CTRLA) MASK Register */
-
-/* -------- SERCOM_SPI_CTRLA : (SERCOM Offset: 0x00) (R/W 32) SPI SPI Control A -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t SWRST:1;          /*!< bit:      0  Software Reset                     */
-    uint32_t ENABLE:1;         /*!< bit:      1  Enable                             */
-    uint32_t MODE:3;           /*!< bit:  2.. 4  Operating Mode                     */
-    uint32_t :2;               /*!< bit:  5.. 6  Reserved                           */
-    uint32_t RUNSTDBY:1;       /*!< bit:      7  Run during Standby                 */
-    uint32_t IBON:1;           /*!< bit:      8  Immediate Buffer Overflow Notification */
-    uint32_t :7;               /*!< bit:  9..15  Reserved                           */
-    uint32_t DOPO:2;           /*!< bit: 16..17  Data Out Pinout                    */
-    uint32_t :2;               /*!< bit: 18..19  Reserved                           */
-    uint32_t DIPO:2;           /*!< bit: 20..21  Data In Pinout                     */
-    uint32_t :2;               /*!< bit: 22..23  Reserved                           */
-    uint32_t FORM:4;           /*!< bit: 24..27  Frame Format                       */
-    uint32_t CPHA:1;           /*!< bit:     28  Clock Phase                        */
-    uint32_t CPOL:1;           /*!< bit:     29  Clock Polarity                     */
-    uint32_t DORD:1;           /*!< bit:     30  Data Order                         */
-    uint32_t :1;               /*!< bit:     31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_SPI_CTRLA_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_SPI_CTRLA_OFFSET     0x00         /**< \brief (SERCOM_SPI_CTRLA offset) SPI Control A */
-#define SERCOM_SPI_CTRLA_RESETVALUE 0x00000000ul /**< \brief (SERCOM_SPI_CTRLA reset_value) SPI Control A */
-
-#define SERCOM_SPI_CTRLA_SWRST_Pos  0            /**< \brief (SERCOM_SPI_CTRLA) Software Reset */
-#define SERCOM_SPI_CTRLA_SWRST      (0x1ul << SERCOM_SPI_CTRLA_SWRST_Pos)
-#define SERCOM_SPI_CTRLA_ENABLE_Pos 1            /**< \brief (SERCOM_SPI_CTRLA) Enable */
-#define SERCOM_SPI_CTRLA_ENABLE     (0x1ul << SERCOM_SPI_CTRLA_ENABLE_Pos)
-#define SERCOM_SPI_CTRLA_MODE_Pos   2            /**< \brief (SERCOM_SPI_CTRLA) Operating Mode */
-#define SERCOM_SPI_CTRLA_MODE_Msk   (0x7ul << SERCOM_SPI_CTRLA_MODE_Pos)
-#define SERCOM_SPI_CTRLA_MODE(value) ((SERCOM_SPI_CTRLA_MODE_Msk & ((value) << SERCOM_SPI_CTRLA_MODE_Pos)))
-#define   SERCOM_SPI_CTRLA_MODE_USART_EXT_CLK_Val 0x0ul  /**< \brief (SERCOM_SPI_CTRLA) USART mode with external clock */
-#define   SERCOM_SPI_CTRLA_MODE_USART_INT_CLK_Val 0x1ul  /**< \brief (SERCOM_SPI_CTRLA) USART mode with internal clock */
-#define   SERCOM_SPI_CTRLA_MODE_SPI_SLAVE_Val 0x2ul  /**< \brief (SERCOM_SPI_CTRLA) SPI mode with external clock */
-#define   SERCOM_SPI_CTRLA_MODE_SPI_MASTER_Val 0x3ul  /**< \brief (SERCOM_SPI_CTRLA) SPI mode with internal clock */
-#define   SERCOM_SPI_CTRLA_MODE_I2C_SLAVE_Val 0x4ul  /**< \brief (SERCOM_SPI_CTRLA) I2C mode with external clock */
-#define   SERCOM_SPI_CTRLA_MODE_I2C_MASTER_Val 0x5ul  /**< \brief (SERCOM_SPI_CTRLA) I2C mode with internal clock */
-#define SERCOM_SPI_CTRLA_MODE_USART_EXT_CLK (SERCOM_SPI_CTRLA_MODE_USART_EXT_CLK_Val << SERCOM_SPI_CTRLA_MODE_Pos)
-#define SERCOM_SPI_CTRLA_MODE_USART_INT_CLK (SERCOM_SPI_CTRLA_MODE_USART_INT_CLK_Val << SERCOM_SPI_CTRLA_MODE_Pos)
-#define SERCOM_SPI_CTRLA_MODE_SPI_SLAVE (SERCOM_SPI_CTRLA_MODE_SPI_SLAVE_Val << SERCOM_SPI_CTRLA_MODE_Pos)
-#define SERCOM_SPI_CTRLA_MODE_SPI_MASTER (SERCOM_SPI_CTRLA_MODE_SPI_MASTER_Val << SERCOM_SPI_CTRLA_MODE_Pos)
-#define SERCOM_SPI_CTRLA_MODE_I2C_SLAVE (SERCOM_SPI_CTRLA_MODE_I2C_SLAVE_Val << SERCOM_SPI_CTRLA_MODE_Pos)
-#define SERCOM_SPI_CTRLA_MODE_I2C_MASTER (SERCOM_SPI_CTRLA_MODE_I2C_MASTER_Val << SERCOM_SPI_CTRLA_MODE_Pos)
-#define SERCOM_SPI_CTRLA_RUNSTDBY_Pos 7            /**< \brief (SERCOM_SPI_CTRLA) Run during Standby */
-#define SERCOM_SPI_CTRLA_RUNSTDBY   (0x1ul << SERCOM_SPI_CTRLA_RUNSTDBY_Pos)
-#define SERCOM_SPI_CTRLA_IBON_Pos   8            /**< \brief (SERCOM_SPI_CTRLA) Immediate Buffer Overflow Notification */
-#define SERCOM_SPI_CTRLA_IBON       (0x1ul << SERCOM_SPI_CTRLA_IBON_Pos)
-#define SERCOM_SPI_CTRLA_DOPO_Pos   16           /**< \brief (SERCOM_SPI_CTRLA) Data Out Pinout */
-#define SERCOM_SPI_CTRLA_DOPO_Msk   (0x3ul << SERCOM_SPI_CTRLA_DOPO_Pos)
-#define SERCOM_SPI_CTRLA_DOPO(value) ((SERCOM_SPI_CTRLA_DOPO_Msk & ((value) << SERCOM_SPI_CTRLA_DOPO_Pos)))
-#define SERCOM_SPI_CTRLA_DIPO_Pos   20           /**< \brief (SERCOM_SPI_CTRLA) Data In Pinout */
-#define SERCOM_SPI_CTRLA_DIPO_Msk   (0x3ul << SERCOM_SPI_CTRLA_DIPO_Pos)
-#define SERCOM_SPI_CTRLA_DIPO(value) ((SERCOM_SPI_CTRLA_DIPO_Msk & ((value) << SERCOM_SPI_CTRLA_DIPO_Pos)))
-#define SERCOM_SPI_CTRLA_FORM_Pos   24           /**< \brief (SERCOM_SPI_CTRLA) Frame Format */
-#define SERCOM_SPI_CTRLA_FORM_Msk   (0xFul << SERCOM_SPI_CTRLA_FORM_Pos)
-#define SERCOM_SPI_CTRLA_FORM(value) ((SERCOM_SPI_CTRLA_FORM_Msk & ((value) << SERCOM_SPI_CTRLA_FORM_Pos)))
-#define SERCOM_SPI_CTRLA_CPHA_Pos   28           /**< \brief (SERCOM_SPI_CTRLA) Clock Phase */
-#define SERCOM_SPI_CTRLA_CPHA       (0x1ul << SERCOM_SPI_CTRLA_CPHA_Pos)
-#define SERCOM_SPI_CTRLA_CPOL_Pos   29           /**< \brief (SERCOM_SPI_CTRLA) Clock Polarity */
-#define SERCOM_SPI_CTRLA_CPOL       (0x1ul << SERCOM_SPI_CTRLA_CPOL_Pos)
-#define SERCOM_SPI_CTRLA_DORD_Pos   30           /**< \brief (SERCOM_SPI_CTRLA) Data Order */
-#define SERCOM_SPI_CTRLA_DORD       (0x1ul << SERCOM_SPI_CTRLA_DORD_Pos)
-#define SERCOM_SPI_CTRLA_MASK       0x7F33019Ful /**< \brief (SERCOM_SPI_CTRLA) MASK Register */
-
-/* -------- SERCOM_USART_CTRLA : (SERCOM Offset: 0x00) (R/W 32) USART USART Control A -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t SWRST:1;          /*!< bit:      0  Software Reset                     */
-    uint32_t ENABLE:1;         /*!< bit:      1  Enable                             */
-    uint32_t MODE:3;           /*!< bit:  2.. 4  Operating Mode                     */
-    uint32_t :2;               /*!< bit:  5.. 6  Reserved                           */
-    uint32_t RUNSTDBY:1;       /*!< bit:      7  Run during Standby                 */
-    uint32_t IBON:1;           /*!< bit:      8  Immediate Buffer Overflow Notification */
-    uint32_t :4;               /*!< bit:  9..12  Reserved                           */
-    uint32_t SAMPR:3;          /*!< bit: 13..15  Sample                             */
-    uint32_t TXPO:2;           /*!< bit: 16..17  Transmit Data Pinout               */
-    uint32_t :2;               /*!< bit: 18..19  Reserved                           */
-    uint32_t RXPO:2;           /*!< bit: 20..21  Receive Data Pinout                */
-    uint32_t SAMPA:2;          /*!< bit: 22..23  Sample Adjustment                  */
-    uint32_t FORM:4;           /*!< bit: 24..27  Frame Format                       */
-    uint32_t CMODE:1;          /*!< bit:     28  Communication Mode                 */
-    uint32_t CPOL:1;           /*!< bit:     29  Clock Polarity                     */
-    uint32_t DORD:1;           /*!< bit:     30  Data Order                         */
-    uint32_t :1;               /*!< bit:     31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_USART_CTRLA_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_USART_CTRLA_OFFSET   0x00         /**< \brief (SERCOM_USART_CTRLA offset) USART Control A */
-#define SERCOM_USART_CTRLA_RESETVALUE 0x00000000ul /**< \brief (SERCOM_USART_CTRLA reset_value) USART Control A */
-
-#define SERCOM_USART_CTRLA_SWRST_Pos 0            /**< \brief (SERCOM_USART_CTRLA) Software Reset */
-#define SERCOM_USART_CTRLA_SWRST    (0x1ul << SERCOM_USART_CTRLA_SWRST_Pos)
-#define SERCOM_USART_CTRLA_ENABLE_Pos 1            /**< \brief (SERCOM_USART_CTRLA) Enable */
-#define SERCOM_USART_CTRLA_ENABLE   (0x1ul << SERCOM_USART_CTRLA_ENABLE_Pos)
-#define SERCOM_USART_CTRLA_MODE_Pos 2            /**< \brief (SERCOM_USART_CTRLA) Operating Mode */
-#define SERCOM_USART_CTRLA_MODE_Msk (0x7ul << SERCOM_USART_CTRLA_MODE_Pos)
-#define SERCOM_USART_CTRLA_MODE(value) ((SERCOM_USART_CTRLA_MODE_Msk & ((value) << SERCOM_USART_CTRLA_MODE_Pos)))
-#define   SERCOM_USART_CTRLA_MODE_USART_EXT_CLK_Val 0x0ul  /**< \brief (SERCOM_USART_CTRLA) USART mode with external clock */
-#define   SERCOM_USART_CTRLA_MODE_USART_INT_CLK_Val 0x1ul  /**< \brief (SERCOM_USART_CTRLA) USART mode with internal clock */
-#define   SERCOM_USART_CTRLA_MODE_SPI_SLAVE_Val 0x2ul  /**< \brief (SERCOM_USART_CTRLA) SPI mode with external clock */
-#define   SERCOM_USART_CTRLA_MODE_SPI_MASTER_Val 0x3ul  /**< \brief (SERCOM_USART_CTRLA) SPI mode with internal clock */
-#define   SERCOM_USART_CTRLA_MODE_I2C_SLAVE_Val 0x4ul  /**< \brief (SERCOM_USART_CTRLA) I2C mode with external clock */
-#define   SERCOM_USART_CTRLA_MODE_I2C_MASTER_Val 0x5ul  /**< \brief (SERCOM_USART_CTRLA) I2C mode with internal clock */
-#define SERCOM_USART_CTRLA_MODE_USART_EXT_CLK (SERCOM_USART_CTRLA_MODE_USART_EXT_CLK_Val << SERCOM_USART_CTRLA_MODE_Pos)
-#define SERCOM_USART_CTRLA_MODE_USART_INT_CLK (SERCOM_USART_CTRLA_MODE_USART_INT_CLK_Val << SERCOM_USART_CTRLA_MODE_Pos)
-#define SERCOM_USART_CTRLA_MODE_SPI_SLAVE (SERCOM_USART_CTRLA_MODE_SPI_SLAVE_Val << SERCOM_USART_CTRLA_MODE_Pos)
-#define SERCOM_USART_CTRLA_MODE_SPI_MASTER (SERCOM_USART_CTRLA_MODE_SPI_MASTER_Val << SERCOM_USART_CTRLA_MODE_Pos)
-#define SERCOM_USART_CTRLA_MODE_I2C_SLAVE (SERCOM_USART_CTRLA_MODE_I2C_SLAVE_Val << SERCOM_USART_CTRLA_MODE_Pos)
-#define SERCOM_USART_CTRLA_MODE_I2C_MASTER (SERCOM_USART_CTRLA_MODE_I2C_MASTER_Val << SERCOM_USART_CTRLA_MODE_Pos)
-#define SERCOM_USART_CTRLA_RUNSTDBY_Pos 7            /**< \brief (SERCOM_USART_CTRLA) Run during Standby */
-#define SERCOM_USART_CTRLA_RUNSTDBY (0x1ul << SERCOM_USART_CTRLA_RUNSTDBY_Pos)
-#define SERCOM_USART_CTRLA_IBON_Pos 8            /**< \brief (SERCOM_USART_CTRLA) Immediate Buffer Overflow Notification */
-#define SERCOM_USART_CTRLA_IBON     (0x1ul << SERCOM_USART_CTRLA_IBON_Pos)
-#define SERCOM_USART_CTRLA_SAMPR_Pos 13           /**< \brief (SERCOM_USART_CTRLA) Sample */
-#define SERCOM_USART_CTRLA_SAMPR_Msk (0x7ul << SERCOM_USART_CTRLA_SAMPR_Pos)
-#define SERCOM_USART_CTRLA_SAMPR(value) ((SERCOM_USART_CTRLA_SAMPR_Msk & ((value) << SERCOM_USART_CTRLA_SAMPR_Pos)))
-#define SERCOM_USART_CTRLA_TXPO_Pos 16           /**< \brief (SERCOM_USART_CTRLA) Transmit Data Pinout */
-#define SERCOM_USART_CTRLA_TXPO_Msk (0x3ul << SERCOM_USART_CTRLA_TXPO_Pos)
-#define SERCOM_USART_CTRLA_TXPO(value) ((SERCOM_USART_CTRLA_TXPO_Msk & ((value) << SERCOM_USART_CTRLA_TXPO_Pos)))
-#define SERCOM_USART_CTRLA_RXPO_Pos 20           /**< \brief (SERCOM_USART_CTRLA) Receive Data Pinout */
-#define SERCOM_USART_CTRLA_RXPO_Msk (0x3ul << SERCOM_USART_CTRLA_RXPO_Pos)
-#define SERCOM_USART_CTRLA_RXPO(value) ((SERCOM_USART_CTRLA_RXPO_Msk & ((value) << SERCOM_USART_CTRLA_RXPO_Pos)))
-#define SERCOM_USART_CTRLA_SAMPA_Pos 22           /**< \brief (SERCOM_USART_CTRLA) Sample Adjustment */
-#define SERCOM_USART_CTRLA_SAMPA_Msk (0x3ul << SERCOM_USART_CTRLA_SAMPA_Pos)
-#define SERCOM_USART_CTRLA_SAMPA(value) ((SERCOM_USART_CTRLA_SAMPA_Msk & ((value) << SERCOM_USART_CTRLA_SAMPA_Pos)))
-#define SERCOM_USART_CTRLA_FORM_Pos 24           /**< \brief (SERCOM_USART_CTRLA) Frame Format */
-#define SERCOM_USART_CTRLA_FORM_Msk (0xFul << SERCOM_USART_CTRLA_FORM_Pos)
-#define SERCOM_USART_CTRLA_FORM(value) ((SERCOM_USART_CTRLA_FORM_Msk & ((value) << SERCOM_USART_CTRLA_FORM_Pos)))
-#define SERCOM_USART_CTRLA_CMODE_Pos 28           /**< \brief (SERCOM_USART_CTRLA) Communication Mode */
-#define SERCOM_USART_CTRLA_CMODE    (0x1ul << SERCOM_USART_CTRLA_CMODE_Pos)
-#define SERCOM_USART_CTRLA_CPOL_Pos 29           /**< \brief (SERCOM_USART_CTRLA) Clock Polarity */
-#define SERCOM_USART_CTRLA_CPOL     (0x1ul << SERCOM_USART_CTRLA_CPOL_Pos)
-#define SERCOM_USART_CTRLA_DORD_Pos 30           /**< \brief (SERCOM_USART_CTRLA) Data Order */
-#define SERCOM_USART_CTRLA_DORD     (0x1ul << SERCOM_USART_CTRLA_DORD_Pos)
-#define SERCOM_USART_CTRLA_MASK     0x7FF3E19Ful /**< \brief (SERCOM_USART_CTRLA) MASK Register */
-
-/* -------- SERCOM_I2CM_CTRLB : (SERCOM Offset: 0x04) (R/W 32) I2CM I2CM Control B -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t :8;               /*!< bit:  0.. 7  Reserved                           */
-    uint32_t SMEN:1;           /*!< bit:      8  Smart Mode Enable                  */
-    uint32_t QCEN:1;           /*!< bit:      9  Quick Command Enable               */
-    uint32_t :6;               /*!< bit: 10..15  Reserved                           */
-    uint32_t CMD:2;            /*!< bit: 16..17  Command                            */
-    uint32_t ACKACT:1;         /*!< bit:     18  Acknowledge Action                 */
-    uint32_t :13;              /*!< bit: 19..31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CM_CTRLB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CM_CTRLB_OFFSET    0x04         /**< \brief (SERCOM_I2CM_CTRLB offset) I2CM Control B */
-#define SERCOM_I2CM_CTRLB_RESETVALUE 0x00000000ul /**< \brief (SERCOM_I2CM_CTRLB reset_value) I2CM Control B */
-
-#define SERCOM_I2CM_CTRLB_SMEN_Pos  8            /**< \brief (SERCOM_I2CM_CTRLB) Smart Mode Enable */
-#define SERCOM_I2CM_CTRLB_SMEN      (0x1ul << SERCOM_I2CM_CTRLB_SMEN_Pos)
-#define SERCOM_I2CM_CTRLB_QCEN_Pos  9            /**< \brief (SERCOM_I2CM_CTRLB) Quick Command Enable */
-#define SERCOM_I2CM_CTRLB_QCEN      (0x1ul << SERCOM_I2CM_CTRLB_QCEN_Pos)
-#define SERCOM_I2CM_CTRLB_CMD_Pos   16           /**< \brief (SERCOM_I2CM_CTRLB) Command */
-#define SERCOM_I2CM_CTRLB_CMD_Msk   (0x3ul << SERCOM_I2CM_CTRLB_CMD_Pos)
-#define SERCOM_I2CM_CTRLB_CMD(value) ((SERCOM_I2CM_CTRLB_CMD_Msk & ((value) << SERCOM_I2CM_CTRLB_CMD_Pos)))
-#define SERCOM_I2CM_CTRLB_ACKACT_Pos 18           /**< \brief (SERCOM_I2CM_CTRLB) Acknowledge Action */
-#define SERCOM_I2CM_CTRLB_ACKACT    (0x1ul << SERCOM_I2CM_CTRLB_ACKACT_Pos)
-#define SERCOM_I2CM_CTRLB_MASK      0x00070300ul /**< \brief (SERCOM_I2CM_CTRLB) MASK Register */
-
-/* -------- SERCOM_I2CS_CTRLB : (SERCOM Offset: 0x04) (R/W 32) I2CS I2CS Control B -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t :8;               /*!< bit:  0.. 7  Reserved                           */
-    uint32_t SMEN:1;           /*!< bit:      8  Smart Mode Enable                  */
-    uint32_t GCMD:1;           /*!< bit:      9  PMBus Group Command                */
-    uint32_t AACKEN:1;         /*!< bit:     10  Automatic Address Acknowledge      */
-    uint32_t :3;               /*!< bit: 11..13  Reserved                           */
-    uint32_t AMODE:2;          /*!< bit: 14..15  Address Mode                       */
-    uint32_t CMD:2;            /*!< bit: 16..17  Command                            */
-    uint32_t ACKACT:1;         /*!< bit:     18  Acknowledge Action                 */
-    uint32_t :13;              /*!< bit: 19..31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CS_CTRLB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CS_CTRLB_OFFSET    0x04         /**< \brief (SERCOM_I2CS_CTRLB offset) I2CS Control B */
-#define SERCOM_I2CS_CTRLB_RESETVALUE 0x00000000ul /**< \brief (SERCOM_I2CS_CTRLB reset_value) I2CS Control B */
-
-#define SERCOM_I2CS_CTRLB_SMEN_Pos  8            /**< \brief (SERCOM_I2CS_CTRLB) Smart Mode Enable */
-#define SERCOM_I2CS_CTRLB_SMEN      (0x1ul << SERCOM_I2CS_CTRLB_SMEN_Pos)
-#define SERCOM_I2CS_CTRLB_GCMD_Pos  9            /**< \brief (SERCOM_I2CS_CTRLB) PMBus Group Command */
-#define SERCOM_I2CS_CTRLB_GCMD      (0x1ul << SERCOM_I2CS_CTRLB_GCMD_Pos)
-#define SERCOM_I2CS_CTRLB_AACKEN_Pos 10           /**< \brief (SERCOM_I2CS_CTRLB) Automatic Address Acknowledge */
-#define SERCOM_I2CS_CTRLB_AACKEN    (0x1ul << SERCOM_I2CS_CTRLB_AACKEN_Pos)
-#define SERCOM_I2CS_CTRLB_AMODE_Pos 14           /**< \brief (SERCOM_I2CS_CTRLB) Address Mode */
-#define SERCOM_I2CS_CTRLB_AMODE_Msk (0x3ul << SERCOM_I2CS_CTRLB_AMODE_Pos)
-#define SERCOM_I2CS_CTRLB_AMODE(value) ((SERCOM_I2CS_CTRLB_AMODE_Msk & ((value) << SERCOM_I2CS_CTRLB_AMODE_Pos)))
-#define SERCOM_I2CS_CTRLB_CMD_Pos   16           /**< \brief (SERCOM_I2CS_CTRLB) Command */
-#define SERCOM_I2CS_CTRLB_CMD_Msk   (0x3ul << SERCOM_I2CS_CTRLB_CMD_Pos)
-#define SERCOM_I2CS_CTRLB_CMD(value) ((SERCOM_I2CS_CTRLB_CMD_Msk & ((value) << SERCOM_I2CS_CTRLB_CMD_Pos)))
-#define SERCOM_I2CS_CTRLB_ACKACT_Pos 18           /**< \brief (SERCOM_I2CS_CTRLB) Acknowledge Action */
-#define SERCOM_I2CS_CTRLB_ACKACT    (0x1ul << SERCOM_I2CS_CTRLB_ACKACT_Pos)
-#define SERCOM_I2CS_CTRLB_MASK      0x0007C700ul /**< \brief (SERCOM_I2CS_CTRLB) MASK Register */
-
-/* -------- SERCOM_SPI_CTRLB : (SERCOM Offset: 0x04) (R/W 32) SPI SPI Control B -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t CHSIZE:3;         /*!< bit:  0.. 2  Character Size                     */
-    uint32_t :3;               /*!< bit:  3.. 5  Reserved                           */
-    uint32_t PLOADEN:1;        /*!< bit:      6  Data Preload Enable                */
-    uint32_t :2;               /*!< bit:  7.. 8  Reserved                           */
-    uint32_t SSDE:1;           /*!< bit:      9  Slave Select Low Detect Enable     */
-    uint32_t :3;               /*!< bit: 10..12  Reserved                           */
-    uint32_t MSSEN:1;          /*!< bit:     13  Master Slave Select Enable         */
-    uint32_t AMODE:2;          /*!< bit: 14..15  Address Mode                       */
-    uint32_t :1;               /*!< bit:     16  Reserved                           */
-    uint32_t RXEN:1;           /*!< bit:     17  Receiver Enable                    */
-    uint32_t :14;              /*!< bit: 18..31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_SPI_CTRLB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_SPI_CTRLB_OFFSET     0x04         /**< \brief (SERCOM_SPI_CTRLB offset) SPI Control B */
-#define SERCOM_SPI_CTRLB_RESETVALUE 0x00000000ul /**< \brief (SERCOM_SPI_CTRLB reset_value) SPI Control B */
-
-#define SERCOM_SPI_CTRLB_CHSIZE_Pos 0            /**< \brief (SERCOM_SPI_CTRLB) Character Size */
-#define SERCOM_SPI_CTRLB_CHSIZE_Msk (0x7ul << SERCOM_SPI_CTRLB_CHSIZE_Pos)
-#define SERCOM_SPI_CTRLB_CHSIZE(value) ((SERCOM_SPI_CTRLB_CHSIZE_Msk & ((value) << SERCOM_SPI_CTRLB_CHSIZE_Pos)))
-#define SERCOM_SPI_CTRLB_PLOADEN_Pos 6            /**< \brief (SERCOM_SPI_CTRLB) Data Preload Enable */
-#define SERCOM_SPI_CTRLB_PLOADEN    (0x1ul << SERCOM_SPI_CTRLB_PLOADEN_Pos)
-#define SERCOM_SPI_CTRLB_SSDE_Pos   9            /**< \brief (SERCOM_SPI_CTRLB) Slave Select Low Detect Enable */
-#define SERCOM_SPI_CTRLB_SSDE       (0x1ul << SERCOM_SPI_CTRLB_SSDE_Pos)
-#define SERCOM_SPI_CTRLB_MSSEN_Pos  13           /**< \brief (SERCOM_SPI_CTRLB) Master Slave Select Enable */
-#define SERCOM_SPI_CTRLB_MSSEN      (0x1ul << SERCOM_SPI_CTRLB_MSSEN_Pos)
-#define SERCOM_SPI_CTRLB_AMODE_Pos  14           /**< \brief (SERCOM_SPI_CTRLB) Address Mode */
-#define SERCOM_SPI_CTRLB_AMODE_Msk  (0x3ul << SERCOM_SPI_CTRLB_AMODE_Pos)
-#define SERCOM_SPI_CTRLB_AMODE(value) ((SERCOM_SPI_CTRLB_AMODE_Msk & ((value) << SERCOM_SPI_CTRLB_AMODE_Pos)))
-#define SERCOM_SPI_CTRLB_RXEN_Pos   17           /**< \brief (SERCOM_SPI_CTRLB) Receiver Enable */
-#define SERCOM_SPI_CTRLB_RXEN       (0x1ul << SERCOM_SPI_CTRLB_RXEN_Pos)
-#define SERCOM_SPI_CTRLB_MASK       0x0002E247ul /**< \brief (SERCOM_SPI_CTRLB) MASK Register */
-
-/* -------- SERCOM_USART_CTRLB : (SERCOM Offset: 0x04) (R/W 32) USART USART Control B -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t CHSIZE:3;         /*!< bit:  0.. 2  Character Size                     */
-    uint32_t :3;               /*!< bit:  3.. 5  Reserved                           */
-    uint32_t SBMODE:1;         /*!< bit:      6  Stop Bit Mode                      */
-    uint32_t :1;               /*!< bit:      7  Reserved                           */
-    uint32_t COLDEN:1;         /*!< bit:      8  Collision Detection Enable         */
-    uint32_t SFDE:1;           /*!< bit:      9  Start of Frame Detection Enable    */
-    uint32_t ENC:1;            /*!< bit:     10  Encoding Format                    */
-    uint32_t :2;               /*!< bit: 11..12  Reserved                           */
-    uint32_t PMODE:1;          /*!< bit:     13  Parity Mode                        */
-    uint32_t :2;               /*!< bit: 14..15  Reserved                           */
-    uint32_t TXEN:1;           /*!< bit:     16  Transmitter Enable                 */
-    uint32_t RXEN:1;           /*!< bit:     17  Receiver Enable                    */
-    uint32_t :14;              /*!< bit: 18..31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_USART_CTRLB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_USART_CTRLB_OFFSET   0x04         /**< \brief (SERCOM_USART_CTRLB offset) USART Control B */
-#define SERCOM_USART_CTRLB_RESETVALUE 0x00000000ul /**< \brief (SERCOM_USART_CTRLB reset_value) USART Control B */
-
-#define SERCOM_USART_CTRLB_CHSIZE_Pos 0            /**< \brief (SERCOM_USART_CTRLB) Character Size */
-#define SERCOM_USART_CTRLB_CHSIZE_Msk (0x7ul << SERCOM_USART_CTRLB_CHSIZE_Pos)
-#define SERCOM_USART_CTRLB_CHSIZE(value) ((SERCOM_USART_CTRLB_CHSIZE_Msk & ((value) << SERCOM_USART_CTRLB_CHSIZE_Pos)))
-#define SERCOM_USART_CTRLB_SBMODE_Pos 6            /**< \brief (SERCOM_USART_CTRLB) Stop Bit Mode */
-#define SERCOM_USART_CTRLB_SBMODE   (0x1ul << SERCOM_USART_CTRLB_SBMODE_Pos)
-#define SERCOM_USART_CTRLB_COLDEN_Pos 8            /**< \brief (SERCOM_USART_CTRLB) Collision Detection Enable */
-#define SERCOM_USART_CTRLB_COLDEN   (0x1ul << SERCOM_USART_CTRLB_COLDEN_Pos)
-#define SERCOM_USART_CTRLB_SFDE_Pos 9            /**< \brief (SERCOM_USART_CTRLB) Start of Frame Detection Enable */
-#define SERCOM_USART_CTRLB_SFDE     (0x1ul << SERCOM_USART_CTRLB_SFDE_Pos)
-#define SERCOM_USART_CTRLB_ENC_Pos  10           /**< \brief (SERCOM_USART_CTRLB) Encoding Format */
-#define SERCOM_USART_CTRLB_ENC      (0x1ul << SERCOM_USART_CTRLB_ENC_Pos)
-#define SERCOM_USART_CTRLB_PMODE_Pos 13           /**< \brief (SERCOM_USART_CTRLB) Parity Mode */
-#define SERCOM_USART_CTRLB_PMODE    (0x1ul << SERCOM_USART_CTRLB_PMODE_Pos)
-#define SERCOM_USART_CTRLB_TXEN_Pos 16           /**< \brief (SERCOM_USART_CTRLB) Transmitter Enable */
-#define SERCOM_USART_CTRLB_TXEN     (0x1ul << SERCOM_USART_CTRLB_TXEN_Pos)
-#define SERCOM_USART_CTRLB_RXEN_Pos 17           /**< \brief (SERCOM_USART_CTRLB) Receiver Enable */
-#define SERCOM_USART_CTRLB_RXEN     (0x1ul << SERCOM_USART_CTRLB_RXEN_Pos)
-#define SERCOM_USART_CTRLB_MASK     0x00032747ul /**< \brief (SERCOM_USART_CTRLB) MASK Register */
-
-/* -------- SERCOM_I2CM_BAUD : (SERCOM Offset: 0x0C) (R/W 32) I2CM I2CM Baud Rate -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t BAUD:8;           /*!< bit:  0.. 7  Baud Rate Value                    */
-    uint32_t BAUDLOW:8;        /*!< bit:  8..15  Baud Rate Value Low                */
-    uint32_t HSBAUD:8;         /*!< bit: 16..23  High Speed Baud Rate Value         */
-    uint32_t HSBAUDLOW:8;      /*!< bit: 24..31  High Speed Baud Rate Value Low     */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CM_BAUD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CM_BAUD_OFFSET     0x0C         /**< \brief (SERCOM_I2CM_BAUD offset) I2CM Baud Rate */
-#define SERCOM_I2CM_BAUD_RESETVALUE 0x00000000ul /**< \brief (SERCOM_I2CM_BAUD reset_value) I2CM Baud Rate */
-
-#define SERCOM_I2CM_BAUD_BAUD_Pos   0            /**< \brief (SERCOM_I2CM_BAUD) Baud Rate Value */
-#define SERCOM_I2CM_BAUD_BAUD_Msk   (0xFFul << SERCOM_I2CM_BAUD_BAUD_Pos)
-#define SERCOM_I2CM_BAUD_BAUD(value) ((SERCOM_I2CM_BAUD_BAUD_Msk & ((value) << SERCOM_I2CM_BAUD_BAUD_Pos)))
-#define SERCOM_I2CM_BAUD_BAUDLOW_Pos 8            /**< \brief (SERCOM_I2CM_BAUD) Baud Rate Value Low */
-#define SERCOM_I2CM_BAUD_BAUDLOW_Msk (0xFFul << SERCOM_I2CM_BAUD_BAUDLOW_Pos)
-#define SERCOM_I2CM_BAUD_BAUDLOW(value) ((SERCOM_I2CM_BAUD_BAUDLOW_Msk & ((value) << SERCOM_I2CM_BAUD_BAUDLOW_Pos)))
-#define SERCOM_I2CM_BAUD_HSBAUD_Pos 16           /**< \brief (SERCOM_I2CM_BAUD) High Speed Baud Rate Value */
-#define SERCOM_I2CM_BAUD_HSBAUD_Msk (0xFFul << SERCOM_I2CM_BAUD_HSBAUD_Pos)
-#define SERCOM_I2CM_BAUD_HSBAUD(value) ((SERCOM_I2CM_BAUD_HSBAUD_Msk & ((value) << SERCOM_I2CM_BAUD_HSBAUD_Pos)))
-#define SERCOM_I2CM_BAUD_HSBAUDLOW_Pos 24           /**< \brief (SERCOM_I2CM_BAUD) High Speed Baud Rate Value Low */
-#define SERCOM_I2CM_BAUD_HSBAUDLOW_Msk (0xFFul << SERCOM_I2CM_BAUD_HSBAUDLOW_Pos)
-#define SERCOM_I2CM_BAUD_HSBAUDLOW(value) ((SERCOM_I2CM_BAUD_HSBAUDLOW_Msk & ((value) << SERCOM_I2CM_BAUD_HSBAUDLOW_Pos)))
-#define SERCOM_I2CM_BAUD_MASK       0xFFFFFFFFul /**< \brief (SERCOM_I2CM_BAUD) MASK Register */
-
-/* -------- SERCOM_SPI_BAUD : (SERCOM Offset: 0x0C) (R/W  8) SPI SPI Baud Rate -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  BAUD:8;           /*!< bit:  0.. 7  Baud Rate Value                    */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_SPI_BAUD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_SPI_BAUD_OFFSET      0x0C         /**< \brief (SERCOM_SPI_BAUD offset) SPI Baud Rate */
-#define SERCOM_SPI_BAUD_RESETVALUE  0x00ul       /**< \brief (SERCOM_SPI_BAUD reset_value) SPI Baud Rate */
-
-#define SERCOM_SPI_BAUD_BAUD_Pos    0            /**< \brief (SERCOM_SPI_BAUD) Baud Rate Value */
-#define SERCOM_SPI_BAUD_BAUD_Msk    (0xFFul << SERCOM_SPI_BAUD_BAUD_Pos)
-#define SERCOM_SPI_BAUD_BAUD(value) ((SERCOM_SPI_BAUD_BAUD_Msk & ((value) << SERCOM_SPI_BAUD_BAUD_Pos)))
-#define SERCOM_SPI_BAUD_MASK        0xFFul       /**< \brief (SERCOM_SPI_BAUD) MASK Register */
-
-/* -------- SERCOM_USART_BAUD : (SERCOM Offset: 0x0C) (R/W 16) USART USART Baud Rate -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint16_t BAUD:16;          /*!< bit:  0..15  Baud Rate Value                    */
-  } bit;                       /*!< Structure used for bit  access                  */
-  struct { // FRAC mode
-    uint16_t BAUD:13;          /*!< bit:  0..12  Baud Rate Value                    */
-    uint16_t FP:3;             /*!< bit: 13..15  Fractional Part                    */
-  } FRAC;                      /*!< Structure used for FRAC                         */
-  struct { // FRACFP mode
-    uint16_t BAUD:13;          /*!< bit:  0..12  Baud Rate Value                    */
-    uint16_t FP:3;             /*!< bit: 13..15  Fractional Part                    */
-  } FRACFP;                    /*!< Structure used for FRACFP                       */
-  struct { // USARTFP mode
-    uint16_t BAUD:16;          /*!< bit:  0..15  Baud Rate Value                    */
-  } USARTFP;                   /*!< Structure used for USARTFP                      */
-  uint16_t reg;                /*!< Type      used for register access              */
-} SERCOM_USART_BAUD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_USART_BAUD_OFFSET    0x0C         /**< \brief (SERCOM_USART_BAUD offset) USART Baud Rate */
-#define SERCOM_USART_BAUD_RESETVALUE 0x0000ul     /**< \brief (SERCOM_USART_BAUD reset_value) USART Baud Rate */
-
-#define SERCOM_USART_BAUD_BAUD_Pos  0            /**< \brief (SERCOM_USART_BAUD) Baud Rate Value */
-#define SERCOM_USART_BAUD_BAUD_Msk  (0xFFFFul << SERCOM_USART_BAUD_BAUD_Pos)
-#define SERCOM_USART_BAUD_BAUD(value) ((SERCOM_USART_BAUD_BAUD_Msk & ((value) << SERCOM_USART_BAUD_BAUD_Pos)))
-#define SERCOM_USART_BAUD_MASK      0xFFFFul     /**< \brief (SERCOM_USART_BAUD) MASK Register */
-
-// FRAC mode
-#define SERCOM_USART_BAUD_FRAC_BAUD_Pos 0            /**< \brief (SERCOM_USART_BAUD_FRAC) Baud Rate Value */
-#define SERCOM_USART_BAUD_FRAC_BAUD_Msk (0x1FFFul << SERCOM_USART_BAUD_FRAC_BAUD_Pos)
-#define SERCOM_USART_BAUD_FRAC_BAUD(value) ((SERCOM_USART_BAUD_FRAC_BAUD_Msk & ((value) << SERCOM_USART_BAUD_FRAC_BAUD_Pos)))
-#define SERCOM_USART_BAUD_FRAC_FP_Pos 13           /**< \brief (SERCOM_USART_BAUD_FRAC) Fractional Part */
-#define SERCOM_USART_BAUD_FRAC_FP_Msk (0x7ul << SERCOM_USART_BAUD_FRAC_FP_Pos)
-#define SERCOM_USART_BAUD_FRAC_FP(value) ((SERCOM_USART_BAUD_FRAC_FP_Msk & ((value) << SERCOM_USART_BAUD_FRAC_FP_Pos)))
-#define SERCOM_USART_BAUD_FRAC_MASK 0xFFFFul     /**< \brief (SERCOM_USART_BAUD_FRAC) MASK Register */
-
-// FRACFP mode
-#define SERCOM_USART_BAUD_FRACFP_BAUD_Pos 0            /**< \brief (SERCOM_USART_BAUD_FRACFP) Baud Rate Value */
-#define SERCOM_USART_BAUD_FRACFP_BAUD_Msk (0x1FFFul << SERCOM_USART_BAUD_FRACFP_BAUD_Pos)
-#define SERCOM_USART_BAUD_FRACFP_BAUD(value) ((SERCOM_USART_BAUD_FRACFP_BAUD_Msk & ((value) << SERCOM_USART_BAUD_FRACFP_BAUD_Pos)))
-#define SERCOM_USART_BAUD_FRACFP_FP_Pos 13           /**< \brief (SERCOM_USART_BAUD_FRACFP) Fractional Part */
-#define SERCOM_USART_BAUD_FRACFP_FP_Msk (0x7ul << SERCOM_USART_BAUD_FRACFP_FP_Pos)
-#define SERCOM_USART_BAUD_FRACFP_FP(value) ((SERCOM_USART_BAUD_FRACFP_FP_Msk & ((value) << SERCOM_USART_BAUD_FRACFP_FP_Pos)))
-#define SERCOM_USART_BAUD_FRACFP_MASK 0xFFFFul     /**< \brief (SERCOM_USART_BAUD_FRACFP) MASK Register */
-
-// USARTFP mode
-#define SERCOM_USART_BAUD_USARTFP_BAUD_Pos 0            /**< \brief (SERCOM_USART_BAUD_USARTFP) Baud Rate Value */
-#define SERCOM_USART_BAUD_USARTFP_BAUD_Msk (0xFFFFul << SERCOM_USART_BAUD_USARTFP_BAUD_Pos)
-#define SERCOM_USART_BAUD_USARTFP_BAUD(value) ((SERCOM_USART_BAUD_USARTFP_BAUD_Msk & ((value) << SERCOM_USART_BAUD_USARTFP_BAUD_Pos)))
-#define SERCOM_USART_BAUD_USARTFP_MASK 0xFFFFul     /**< \brief (SERCOM_USART_BAUD_USARTFP) MASK Register */
-
-/* -------- SERCOM_USART_RXPL : (SERCOM Offset: 0x0E) (R/W  8) USART USART Receive Pulse Length -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  RXPL:8;           /*!< bit:  0.. 7  Receive Pulse Length               */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_USART_RXPL_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_USART_RXPL_OFFSET    0x0E         /**< \brief (SERCOM_USART_RXPL offset) USART Receive Pulse Length */
-#define SERCOM_USART_RXPL_RESETVALUE 0x00ul       /**< \brief (SERCOM_USART_RXPL reset_value) USART Receive Pulse Length */
-
-#define SERCOM_USART_RXPL_RXPL_Pos  0            /**< \brief (SERCOM_USART_RXPL) Receive Pulse Length */
-#define SERCOM_USART_RXPL_RXPL_Msk  (0xFFul << SERCOM_USART_RXPL_RXPL_Pos)
-#define SERCOM_USART_RXPL_RXPL(value) ((SERCOM_USART_RXPL_RXPL_Msk & ((value) << SERCOM_USART_RXPL_RXPL_Pos)))
-#define SERCOM_USART_RXPL_MASK      0xFFul       /**< \brief (SERCOM_USART_RXPL) MASK Register */
-
-/* -------- SERCOM_I2CM_INTENCLR : (SERCOM Offset: 0x14) (R/W  8) I2CM I2CM Interrupt Enable Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  MB:1;             /*!< bit:      0  Master On Bus Interrupt Disable    */
-    uint8_t  SB:1;             /*!< bit:      1  Slave On Bus Interrupt Disable     */
-    uint8_t  :5;               /*!< bit:  2.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt Disable   */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_I2CM_INTENCLR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CM_INTENCLR_OFFSET 0x14         /**< \brief (SERCOM_I2CM_INTENCLR offset) I2CM Interrupt Enable Clear */
-#define SERCOM_I2CM_INTENCLR_RESETVALUE 0x00ul       /**< \brief (SERCOM_I2CM_INTENCLR reset_value) I2CM Interrupt Enable Clear */
-
-#define SERCOM_I2CM_INTENCLR_MB_Pos 0            /**< \brief (SERCOM_I2CM_INTENCLR) Master On Bus Interrupt Disable */
-#define SERCOM_I2CM_INTENCLR_MB     (0x1ul << SERCOM_I2CM_INTENCLR_MB_Pos)
-#define SERCOM_I2CM_INTENCLR_SB_Pos 1            /**< \brief (SERCOM_I2CM_INTENCLR) Slave On Bus Interrupt Disable */
-#define SERCOM_I2CM_INTENCLR_SB     (0x1ul << SERCOM_I2CM_INTENCLR_SB_Pos)
-#define SERCOM_I2CM_INTENCLR_ERROR_Pos 7            /**< \brief (SERCOM_I2CM_INTENCLR) Combined Error Interrupt Disable */
-#define SERCOM_I2CM_INTENCLR_ERROR  (0x1ul << SERCOM_I2CM_INTENCLR_ERROR_Pos)
-#define SERCOM_I2CM_INTENCLR_MASK   0x83ul       /**< \brief (SERCOM_I2CM_INTENCLR) MASK Register */
-
-/* -------- SERCOM_I2CS_INTENCLR : (SERCOM Offset: 0x14) (R/W  8) I2CS I2CS Interrupt Enable Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  PREC:1;           /*!< bit:      0  Stop Received Interrupt Disable    */
-    uint8_t  AMATCH:1;         /*!< bit:      1  Address Match Interrupt Disable    */
-    uint8_t  DRDY:1;           /*!< bit:      2  Data Interrupt Disable             */
-    uint8_t  :4;               /*!< bit:  3.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt Disable   */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_I2CS_INTENCLR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CS_INTENCLR_OFFSET 0x14         /**< \brief (SERCOM_I2CS_INTENCLR offset) I2CS Interrupt Enable Clear */
-#define SERCOM_I2CS_INTENCLR_RESETVALUE 0x00ul       /**< \brief (SERCOM_I2CS_INTENCLR reset_value) I2CS Interrupt Enable Clear */
-
-#define SERCOM_I2CS_INTENCLR_PREC_Pos 0            /**< \brief (SERCOM_I2CS_INTENCLR) Stop Received Interrupt Disable */
-#define SERCOM_I2CS_INTENCLR_PREC   (0x1ul << SERCOM_I2CS_INTENCLR_PREC_Pos)
-#define SERCOM_I2CS_INTENCLR_AMATCH_Pos 1            /**< \brief (SERCOM_I2CS_INTENCLR) Address Match Interrupt Disable */
-#define SERCOM_I2CS_INTENCLR_AMATCH (0x1ul << SERCOM_I2CS_INTENCLR_AMATCH_Pos)
-#define SERCOM_I2CS_INTENCLR_DRDY_Pos 2            /**< \brief (SERCOM_I2CS_INTENCLR) Data Interrupt Disable */
-#define SERCOM_I2CS_INTENCLR_DRDY   (0x1ul << SERCOM_I2CS_INTENCLR_DRDY_Pos)
-#define SERCOM_I2CS_INTENCLR_ERROR_Pos 7            /**< \brief (SERCOM_I2CS_INTENCLR) Combined Error Interrupt Disable */
-#define SERCOM_I2CS_INTENCLR_ERROR  (0x1ul << SERCOM_I2CS_INTENCLR_ERROR_Pos)
-#define SERCOM_I2CS_INTENCLR_MASK   0x87ul       /**< \brief (SERCOM_I2CS_INTENCLR) MASK Register */
-
-/* -------- SERCOM_SPI_INTENCLR : (SERCOM Offset: 0x14) (R/W  8) SPI SPI Interrupt Enable Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  DRE:1;            /*!< bit:      0  Data Register Empty Interrupt Disable */
-    uint8_t  TXC:1;            /*!< bit:      1  Transmit Complete Interrupt Disable */
-    uint8_t  RXC:1;            /*!< bit:      2  Receive Complete Interrupt Disable */
-    uint8_t  SSL:1;            /*!< bit:      3  Slave Select Low Interrupt Disable */
-    uint8_t  :3;               /*!< bit:  4.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt Disable   */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_SPI_INTENCLR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_SPI_INTENCLR_OFFSET  0x14         /**< \brief (SERCOM_SPI_INTENCLR offset) SPI Interrupt Enable Clear */
-#define SERCOM_SPI_INTENCLR_RESETVALUE 0x00ul       /**< \brief (SERCOM_SPI_INTENCLR reset_value) SPI Interrupt Enable Clear */
-
-#define SERCOM_SPI_INTENCLR_DRE_Pos 0            /**< \brief (SERCOM_SPI_INTENCLR) Data Register Empty Interrupt Disable */
-#define SERCOM_SPI_INTENCLR_DRE     (0x1ul << SERCOM_SPI_INTENCLR_DRE_Pos)
-#define SERCOM_SPI_INTENCLR_TXC_Pos 1            /**< \brief (SERCOM_SPI_INTENCLR) Transmit Complete Interrupt Disable */
-#define SERCOM_SPI_INTENCLR_TXC     (0x1ul << SERCOM_SPI_INTENCLR_TXC_Pos)
-#define SERCOM_SPI_INTENCLR_RXC_Pos 2            /**< \brief (SERCOM_SPI_INTENCLR) Receive Complete Interrupt Disable */
-#define SERCOM_SPI_INTENCLR_RXC     (0x1ul << SERCOM_SPI_INTENCLR_RXC_Pos)
-#define SERCOM_SPI_INTENCLR_SSL_Pos 3            /**< \brief (SERCOM_SPI_INTENCLR) Slave Select Low Interrupt Disable */
-#define SERCOM_SPI_INTENCLR_SSL     (0x1ul << SERCOM_SPI_INTENCLR_SSL_Pos)
-#define SERCOM_SPI_INTENCLR_ERROR_Pos 7            /**< \brief (SERCOM_SPI_INTENCLR) Combined Error Interrupt Disable */
-#define SERCOM_SPI_INTENCLR_ERROR   (0x1ul << SERCOM_SPI_INTENCLR_ERROR_Pos)
-#define SERCOM_SPI_INTENCLR_MASK    0x8Ful       /**< \brief (SERCOM_SPI_INTENCLR) MASK Register */
-
-/* -------- SERCOM_USART_INTENCLR : (SERCOM Offset: 0x14) (R/W  8) USART USART Interrupt Enable Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  DRE:1;            /*!< bit:      0  Data Register Empty Interrupt Disable */
-    uint8_t  TXC:1;            /*!< bit:      1  Transmit Complete Interrupt Disable */
-    uint8_t  RXC:1;            /*!< bit:      2  Receive Complete Interrupt Disable */
-    uint8_t  RXS:1;            /*!< bit:      3  Receive Start Interrupt Disable    */
-    uint8_t  CTSIC:1;          /*!< bit:      4  Clear To Send Input Change Interrupt Disable */
-    uint8_t  RXBRK:1;          /*!< bit:      5  Break Received Interrupt Disable   */
-    uint8_t  :1;               /*!< bit:      6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt Disable   */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_USART_INTENCLR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_USART_INTENCLR_OFFSET 0x14         /**< \brief (SERCOM_USART_INTENCLR offset) USART Interrupt Enable Clear */
-#define SERCOM_USART_INTENCLR_RESETVALUE 0x00ul       /**< \brief (SERCOM_USART_INTENCLR reset_value) USART Interrupt Enable Clear */
-
-#define SERCOM_USART_INTENCLR_DRE_Pos 0            /**< \brief (SERCOM_USART_INTENCLR) Data Register Empty Interrupt Disable */
-#define SERCOM_USART_INTENCLR_DRE   (0x1ul << SERCOM_USART_INTENCLR_DRE_Pos)
-#define SERCOM_USART_INTENCLR_TXC_Pos 1            /**< \brief (SERCOM_USART_INTENCLR) Transmit Complete Interrupt Disable */
-#define SERCOM_USART_INTENCLR_TXC   (0x1ul << SERCOM_USART_INTENCLR_TXC_Pos)
-#define SERCOM_USART_INTENCLR_RXC_Pos 2            /**< \brief (SERCOM_USART_INTENCLR) Receive Complete Interrupt Disable */
-#define SERCOM_USART_INTENCLR_RXC   (0x1ul << SERCOM_USART_INTENCLR_RXC_Pos)
-#define SERCOM_USART_INTENCLR_RXS_Pos 3            /**< \brief (SERCOM_USART_INTENCLR) Receive Start Interrupt Disable */
-#define SERCOM_USART_INTENCLR_RXS   (0x1ul << SERCOM_USART_INTENCLR_RXS_Pos)
-#define SERCOM_USART_INTENCLR_CTSIC_Pos 4            /**< \brief (SERCOM_USART_INTENCLR) Clear To Send Input Change Interrupt Disable */
-#define SERCOM_USART_INTENCLR_CTSIC (0x1ul << SERCOM_USART_INTENCLR_CTSIC_Pos)
-#define SERCOM_USART_INTENCLR_RXBRK_Pos 5            /**< \brief (SERCOM_USART_INTENCLR) Break Received Interrupt Disable */
-#define SERCOM_USART_INTENCLR_RXBRK (0x1ul << SERCOM_USART_INTENCLR_RXBRK_Pos)
-#define SERCOM_USART_INTENCLR_ERROR_Pos 7            /**< \brief (SERCOM_USART_INTENCLR) Combined Error Interrupt Disable */
-#define SERCOM_USART_INTENCLR_ERROR (0x1ul << SERCOM_USART_INTENCLR_ERROR_Pos)
-#define SERCOM_USART_INTENCLR_MASK  0xBFul       /**< \brief (SERCOM_USART_INTENCLR) MASK Register */
-
-/* -------- SERCOM_I2CM_INTENSET : (SERCOM Offset: 0x16) (R/W  8) I2CM I2CM Interrupt Enable Set -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  MB:1;             /*!< bit:      0  Master On Bus Interrupt Enable     */
-    uint8_t  SB:1;             /*!< bit:      1  Slave On Bus Interrupt Enable      */
-    uint8_t  :5;               /*!< bit:  2.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt Enable    */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_I2CM_INTENSET_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CM_INTENSET_OFFSET 0x16         /**< \brief (SERCOM_I2CM_INTENSET offset) I2CM Interrupt Enable Set */
-#define SERCOM_I2CM_INTENSET_RESETVALUE 0x00ul       /**< \brief (SERCOM_I2CM_INTENSET reset_value) I2CM Interrupt Enable Set */
-
-#define SERCOM_I2CM_INTENSET_MB_Pos 0            /**< \brief (SERCOM_I2CM_INTENSET) Master On Bus Interrupt Enable */
-#define SERCOM_I2CM_INTENSET_MB     (0x1ul << SERCOM_I2CM_INTENSET_MB_Pos)
-#define SERCOM_I2CM_INTENSET_SB_Pos 1            /**< \brief (SERCOM_I2CM_INTENSET) Slave On Bus Interrupt Enable */
-#define SERCOM_I2CM_INTENSET_SB     (0x1ul << SERCOM_I2CM_INTENSET_SB_Pos)
-#define SERCOM_I2CM_INTENSET_ERROR_Pos 7            /**< \brief (SERCOM_I2CM_INTENSET) Combined Error Interrupt Enable */
-#define SERCOM_I2CM_INTENSET_ERROR  (0x1ul << SERCOM_I2CM_INTENSET_ERROR_Pos)
-#define SERCOM_I2CM_INTENSET_MASK   0x83ul       /**< \brief (SERCOM_I2CM_INTENSET) MASK Register */
-
-/* -------- SERCOM_I2CS_INTENSET : (SERCOM Offset: 0x16) (R/W  8) I2CS I2CS Interrupt Enable Set -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  PREC:1;           /*!< bit:      0  Stop Received Interrupt Enable     */
-    uint8_t  AMATCH:1;         /*!< bit:      1  Address Match Interrupt Enable     */
-    uint8_t  DRDY:1;           /*!< bit:      2  Data Interrupt Enable              */
-    uint8_t  :4;               /*!< bit:  3.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt Enable    */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_I2CS_INTENSET_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CS_INTENSET_OFFSET 0x16         /**< \brief (SERCOM_I2CS_INTENSET offset) I2CS Interrupt Enable Set */
-#define SERCOM_I2CS_INTENSET_RESETVALUE 0x00ul       /**< \brief (SERCOM_I2CS_INTENSET reset_value) I2CS Interrupt Enable Set */
-
-#define SERCOM_I2CS_INTENSET_PREC_Pos 0            /**< \brief (SERCOM_I2CS_INTENSET) Stop Received Interrupt Enable */
-#define SERCOM_I2CS_INTENSET_PREC   (0x1ul << SERCOM_I2CS_INTENSET_PREC_Pos)
-#define SERCOM_I2CS_INTENSET_AMATCH_Pos 1            /**< \brief (SERCOM_I2CS_INTENSET) Address Match Interrupt Enable */
-#define SERCOM_I2CS_INTENSET_AMATCH (0x1ul << SERCOM_I2CS_INTENSET_AMATCH_Pos)
-#define SERCOM_I2CS_INTENSET_DRDY_Pos 2            /**< \brief (SERCOM_I2CS_INTENSET) Data Interrupt Enable */
-#define SERCOM_I2CS_INTENSET_DRDY   (0x1ul << SERCOM_I2CS_INTENSET_DRDY_Pos)
-#define SERCOM_I2CS_INTENSET_ERROR_Pos 7            /**< \brief (SERCOM_I2CS_INTENSET) Combined Error Interrupt Enable */
-#define SERCOM_I2CS_INTENSET_ERROR  (0x1ul << SERCOM_I2CS_INTENSET_ERROR_Pos)
-#define SERCOM_I2CS_INTENSET_MASK   0x87ul       /**< \brief (SERCOM_I2CS_INTENSET) MASK Register */
-
-/* -------- SERCOM_SPI_INTENSET : (SERCOM Offset: 0x16) (R/W  8) SPI SPI Interrupt Enable Set -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  DRE:1;            /*!< bit:      0  Data Register Empty Interrupt Enable */
-    uint8_t  TXC:1;            /*!< bit:      1  Transmit Complete Interrupt Enable */
-    uint8_t  RXC:1;            /*!< bit:      2  Receive Complete Interrupt Enable  */
-    uint8_t  SSL:1;            /*!< bit:      3  Slave Select Low Interrupt Enable  */
-    uint8_t  :3;               /*!< bit:  4.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt Enable    */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_SPI_INTENSET_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_SPI_INTENSET_OFFSET  0x16         /**< \brief (SERCOM_SPI_INTENSET offset) SPI Interrupt Enable Set */
-#define SERCOM_SPI_INTENSET_RESETVALUE 0x00ul       /**< \brief (SERCOM_SPI_INTENSET reset_value) SPI Interrupt Enable Set */
-
-#define SERCOM_SPI_INTENSET_DRE_Pos 0            /**< \brief (SERCOM_SPI_INTENSET) Data Register Empty Interrupt Enable */
-#define SERCOM_SPI_INTENSET_DRE     (0x1ul << SERCOM_SPI_INTENSET_DRE_Pos)
-#define SERCOM_SPI_INTENSET_TXC_Pos 1            /**< \brief (SERCOM_SPI_INTENSET) Transmit Complete Interrupt Enable */
-#define SERCOM_SPI_INTENSET_TXC     (0x1ul << SERCOM_SPI_INTENSET_TXC_Pos)
-#define SERCOM_SPI_INTENSET_RXC_Pos 2            /**< \brief (SERCOM_SPI_INTENSET) Receive Complete Interrupt Enable */
-#define SERCOM_SPI_INTENSET_RXC     (0x1ul << SERCOM_SPI_INTENSET_RXC_Pos)
-#define SERCOM_SPI_INTENSET_SSL_Pos 3            /**< \brief (SERCOM_SPI_INTENSET) Slave Select Low Interrupt Enable */
-#define SERCOM_SPI_INTENSET_SSL     (0x1ul << SERCOM_SPI_INTENSET_SSL_Pos)
-#define SERCOM_SPI_INTENSET_ERROR_Pos 7            /**< \brief (SERCOM_SPI_INTENSET) Combined Error Interrupt Enable */
-#define SERCOM_SPI_INTENSET_ERROR   (0x1ul << SERCOM_SPI_INTENSET_ERROR_Pos)
-#define SERCOM_SPI_INTENSET_MASK    0x8Ful       /**< \brief (SERCOM_SPI_INTENSET) MASK Register */
-
-/* -------- SERCOM_USART_INTENSET : (SERCOM Offset: 0x16) (R/W  8) USART USART Interrupt Enable Set -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  DRE:1;            /*!< bit:      0  Data Register Empty Interrupt Enable */
-    uint8_t  TXC:1;            /*!< bit:      1  Transmit Complete Interrupt Enable */
-    uint8_t  RXC:1;            /*!< bit:      2  Receive Complete Interrupt Enable  */
-    uint8_t  RXS:1;            /*!< bit:      3  Receive Start Interrupt Enable     */
-    uint8_t  CTSIC:1;          /*!< bit:      4  Clear To Send Input Change Interrupt Enable */
-    uint8_t  RXBRK:1;          /*!< bit:      5  Break Received Interrupt Enable    */
-    uint8_t  :1;               /*!< bit:      6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt Enable    */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_USART_INTENSET_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_USART_INTENSET_OFFSET 0x16         /**< \brief (SERCOM_USART_INTENSET offset) USART Interrupt Enable Set */
-#define SERCOM_USART_INTENSET_RESETVALUE 0x00ul       /**< \brief (SERCOM_USART_INTENSET reset_value) USART Interrupt Enable Set */
-
-#define SERCOM_USART_INTENSET_DRE_Pos 0            /**< \brief (SERCOM_USART_INTENSET) Data Register Empty Interrupt Enable */
-#define SERCOM_USART_INTENSET_DRE   (0x1ul << SERCOM_USART_INTENSET_DRE_Pos)
-#define SERCOM_USART_INTENSET_TXC_Pos 1            /**< \brief (SERCOM_USART_INTENSET) Transmit Complete Interrupt Enable */
-#define SERCOM_USART_INTENSET_TXC   (0x1ul << SERCOM_USART_INTENSET_TXC_Pos)
-#define SERCOM_USART_INTENSET_RXC_Pos 2            /**< \brief (SERCOM_USART_INTENSET) Receive Complete Interrupt Enable */
-#define SERCOM_USART_INTENSET_RXC   (0x1ul << SERCOM_USART_INTENSET_RXC_Pos)
-#define SERCOM_USART_INTENSET_RXS_Pos 3            /**< \brief (SERCOM_USART_INTENSET) Receive Start Interrupt Enable */
-#define SERCOM_USART_INTENSET_RXS   (0x1ul << SERCOM_USART_INTENSET_RXS_Pos)
-#define SERCOM_USART_INTENSET_CTSIC_Pos 4            /**< \brief (SERCOM_USART_INTENSET) Clear To Send Input Change Interrupt Enable */
-#define SERCOM_USART_INTENSET_CTSIC (0x1ul << SERCOM_USART_INTENSET_CTSIC_Pos)
-#define SERCOM_USART_INTENSET_RXBRK_Pos 5            /**< \brief (SERCOM_USART_INTENSET) Break Received Interrupt Enable */
-#define SERCOM_USART_INTENSET_RXBRK (0x1ul << SERCOM_USART_INTENSET_RXBRK_Pos)
-#define SERCOM_USART_INTENSET_ERROR_Pos 7            /**< \brief (SERCOM_USART_INTENSET) Combined Error Interrupt Enable */
-#define SERCOM_USART_INTENSET_ERROR (0x1ul << SERCOM_USART_INTENSET_ERROR_Pos)
-#define SERCOM_USART_INTENSET_MASK  0xBFul       /**< \brief (SERCOM_USART_INTENSET) MASK Register */
-
-/* -------- SERCOM_I2CM_INTFLAG : (SERCOM Offset: 0x18) (R/W  8) I2CM I2CM Interrupt Flag Status and Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  MB:1;             /*!< bit:      0  Master On Bus Interrupt            */
-    uint8_t  SB:1;             /*!< bit:      1  Slave On Bus Interrupt             */
-    uint8_t  :5;               /*!< bit:  2.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_I2CM_INTFLAG_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CM_INTFLAG_OFFSET  0x18         /**< \brief (SERCOM_I2CM_INTFLAG offset) I2CM Interrupt Flag Status and Clear */
-#define SERCOM_I2CM_INTFLAG_RESETVALUE 0x00ul       /**< \brief (SERCOM_I2CM_INTFLAG reset_value) I2CM Interrupt Flag Status and Clear */
-
-#define SERCOM_I2CM_INTFLAG_MB_Pos  0            /**< \brief (SERCOM_I2CM_INTFLAG) Master On Bus Interrupt */
-#define SERCOM_I2CM_INTFLAG_MB      (0x1ul << SERCOM_I2CM_INTFLAG_MB_Pos)
-#define SERCOM_I2CM_INTFLAG_SB_Pos  1            /**< \brief (SERCOM_I2CM_INTFLAG) Slave On Bus Interrupt */
-#define SERCOM_I2CM_INTFLAG_SB      (0x1ul << SERCOM_I2CM_INTFLAG_SB_Pos)
-#define SERCOM_I2CM_INTFLAG_ERROR_Pos 7            /**< \brief (SERCOM_I2CM_INTFLAG) Combined Error Interrupt */
-#define SERCOM_I2CM_INTFLAG_ERROR   (0x1ul << SERCOM_I2CM_INTFLAG_ERROR_Pos)
-#define SERCOM_I2CM_INTFLAG_MASK    0x83ul       /**< \brief (SERCOM_I2CM_INTFLAG) MASK Register */
-
-/* -------- SERCOM_I2CS_INTFLAG : (SERCOM Offset: 0x18) (R/W  8) I2CS I2CS Interrupt Flag Status and Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  PREC:1;           /*!< bit:      0  Stop Received Interrupt            */
-    uint8_t  AMATCH:1;         /*!< bit:      1  Address Match Interrupt            */
-    uint8_t  DRDY:1;           /*!< bit:      2  Data Interrupt                     */
-    uint8_t  :4;               /*!< bit:  3.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_I2CS_INTFLAG_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CS_INTFLAG_OFFSET  0x18         /**< \brief (SERCOM_I2CS_INTFLAG offset) I2CS Interrupt Flag Status and Clear */
-#define SERCOM_I2CS_INTFLAG_RESETVALUE 0x00ul       /**< \brief (SERCOM_I2CS_INTFLAG reset_value) I2CS Interrupt Flag Status and Clear */
-
-#define SERCOM_I2CS_INTFLAG_PREC_Pos 0            /**< \brief (SERCOM_I2CS_INTFLAG) Stop Received Interrupt */
-#define SERCOM_I2CS_INTFLAG_PREC    (0x1ul << SERCOM_I2CS_INTFLAG_PREC_Pos)
-#define SERCOM_I2CS_INTFLAG_AMATCH_Pos 1            /**< \brief (SERCOM_I2CS_INTFLAG) Address Match Interrupt */
-#define SERCOM_I2CS_INTFLAG_AMATCH  (0x1ul << SERCOM_I2CS_INTFLAG_AMATCH_Pos)
-#define SERCOM_I2CS_INTFLAG_DRDY_Pos 2            /**< \brief (SERCOM_I2CS_INTFLAG) Data Interrupt */
-#define SERCOM_I2CS_INTFLAG_DRDY    (0x1ul << SERCOM_I2CS_INTFLAG_DRDY_Pos)
-#define SERCOM_I2CS_INTFLAG_ERROR_Pos 7            /**< \brief (SERCOM_I2CS_INTFLAG) Combined Error Interrupt */
-#define SERCOM_I2CS_INTFLAG_ERROR   (0x1ul << SERCOM_I2CS_INTFLAG_ERROR_Pos)
-#define SERCOM_I2CS_INTFLAG_MASK    0x87ul       /**< \brief (SERCOM_I2CS_INTFLAG) MASK Register */
-
-/* -------- SERCOM_SPI_INTFLAG : (SERCOM Offset: 0x18) (R/W  8) SPI SPI Interrupt Flag Status and Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  DRE:1;            /*!< bit:      0  Data Register Empty Interrupt      */
-    uint8_t  TXC:1;            /*!< bit:      1  Transmit Complete Interrupt        */
-    uint8_t  RXC:1;            /*!< bit:      2  Receive Complete Interrupt         */
-    uint8_t  SSL:1;            /*!< bit:      3  Slave Select Low Interrupt Flag    */
-    uint8_t  :3;               /*!< bit:  4.. 6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_SPI_INTFLAG_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_SPI_INTFLAG_OFFSET   0x18         /**< \brief (SERCOM_SPI_INTFLAG offset) SPI Interrupt Flag Status and Clear */
-#define SERCOM_SPI_INTFLAG_RESETVALUE 0x00ul       /**< \brief (SERCOM_SPI_INTFLAG reset_value) SPI Interrupt Flag Status and Clear */
-
-#define SERCOM_SPI_INTFLAG_DRE_Pos  0            /**< \brief (SERCOM_SPI_INTFLAG) Data Register Empty Interrupt */
-#define SERCOM_SPI_INTFLAG_DRE      (0x1ul << SERCOM_SPI_INTFLAG_DRE_Pos)
-#define SERCOM_SPI_INTFLAG_TXC_Pos  1            /**< \brief (SERCOM_SPI_INTFLAG) Transmit Complete Interrupt */
-#define SERCOM_SPI_INTFLAG_TXC      (0x1ul << SERCOM_SPI_INTFLAG_TXC_Pos)
-#define SERCOM_SPI_INTFLAG_RXC_Pos  2            /**< \brief (SERCOM_SPI_INTFLAG) Receive Complete Interrupt */
-#define SERCOM_SPI_INTFLAG_RXC      (0x1ul << SERCOM_SPI_INTFLAG_RXC_Pos)
-#define SERCOM_SPI_INTFLAG_SSL_Pos  3            /**< \brief (SERCOM_SPI_INTFLAG) Slave Select Low Interrupt Flag */
-#define SERCOM_SPI_INTFLAG_SSL      (0x1ul << SERCOM_SPI_INTFLAG_SSL_Pos)
-#define SERCOM_SPI_INTFLAG_ERROR_Pos 7            /**< \brief (SERCOM_SPI_INTFLAG) Combined Error Interrupt */
-#define SERCOM_SPI_INTFLAG_ERROR    (0x1ul << SERCOM_SPI_INTFLAG_ERROR_Pos)
-#define SERCOM_SPI_INTFLAG_MASK     0x8Ful       /**< \brief (SERCOM_SPI_INTFLAG) MASK Register */
-
-/* -------- SERCOM_USART_INTFLAG : (SERCOM Offset: 0x18) (R/W  8) USART USART Interrupt Flag Status and Clear -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint8_t  DRE:1;            /*!< bit:      0  Data Register Empty Interrupt      */
-    uint8_t  TXC:1;            /*!< bit:      1  Transmit Complete Interrupt        */
-    uint8_t  RXC:1;            /*!< bit:      2  Receive Complete Interrupt         */
-    uint8_t  RXS:1;            /*!< bit:      3  Receive Start Interrupt            */
-    uint8_t  CTSIC:1;          /*!< bit:      4  Clear To Send Input Change Interrupt */
-    uint8_t  RXBRK:1;          /*!< bit:      5  Break Received Interrupt           */
-    uint8_t  :1;               /*!< bit:      6  Reserved                           */
-    uint8_t  ERROR:1;          /*!< bit:      7  Combined Error Interrupt           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint8_t reg;                 /*!< Type      used for register access              */
-} SERCOM_USART_INTFLAG_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_USART_INTFLAG_OFFSET 0x18         /**< \brief (SERCOM_USART_INTFLAG offset) USART Interrupt Flag Status and Clear */
-#define SERCOM_USART_INTFLAG_RESETVALUE 0x00ul       /**< \brief (SERCOM_USART_INTFLAG reset_value) USART Interrupt Flag Status and Clear */
-
-#define SERCOM_USART_INTFLAG_DRE_Pos 0            /**< \brief (SERCOM_USART_INTFLAG) Data Register Empty Interrupt */
-#define SERCOM_USART_INTFLAG_DRE    (0x1ul << SERCOM_USART_INTFLAG_DRE_Pos)
-#define SERCOM_USART_INTFLAG_TXC_Pos 1            /**< \brief (SERCOM_USART_INTFLAG) Transmit Complete Interrupt */
-#define SERCOM_USART_INTFLAG_TXC    (0x1ul << SERCOM_USART_INTFLAG_TXC_Pos)
-#define SERCOM_USART_INTFLAG_RXC_Pos 2            /**< \brief (SERCOM_USART_INTFLAG) Receive Complete Interrupt */
-#define SERCOM_USART_INTFLAG_RXC    (0x1ul << SERCOM_USART_INTFLAG_RXC_Pos)
-#define SERCOM_USART_INTFLAG_RXS_Pos 3            /**< \brief (SERCOM_USART_INTFLAG) Receive Start Interrupt */
-#define SERCOM_USART_INTFLAG_RXS    (0x1ul << SERCOM_USART_INTFLAG_RXS_Pos)
-#define SERCOM_USART_INTFLAG_CTSIC_Pos 4            /**< \brief (SERCOM_USART_INTFLAG) Clear To Send Input Change Interrupt */
-#define SERCOM_USART_INTFLAG_CTSIC  (0x1ul << SERCOM_USART_INTFLAG_CTSIC_Pos)
-#define SERCOM_USART_INTFLAG_RXBRK_Pos 5            /**< \brief (SERCOM_USART_INTFLAG) Break Received Interrupt */
-#define SERCOM_USART_INTFLAG_RXBRK  (0x1ul << SERCOM_USART_INTFLAG_RXBRK_Pos)
-#define SERCOM_USART_INTFLAG_ERROR_Pos 7            /**< \brief (SERCOM_USART_INTFLAG) Combined Error Interrupt */
-#define SERCOM_USART_INTFLAG_ERROR  (0x1ul << SERCOM_USART_INTFLAG_ERROR_Pos)
-#define SERCOM_USART_INTFLAG_MASK   0xBFul       /**< \brief (SERCOM_USART_INTFLAG) MASK Register */
-
-/* -------- SERCOM_I2CM_STATUS : (SERCOM Offset: 0x1A) (R/W 16) I2CM I2CM Status -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint16_t BUSERR:1;         /*!< bit:      0  Bus Error                          */
-    uint16_t ARBLOST:1;        /*!< bit:      1  Arbitration Lost                   */
-    uint16_t RXNACK:1;         /*!< bit:      2  Received Not Acknowledge           */
-    uint16_t :1;               /*!< bit:      3  Reserved                           */
-    uint16_t BUSSTATE:2;       /*!< bit:  4.. 5  Bus State                          */
-    uint16_t LOWTOUT:1;        /*!< bit:      6  SCL Low Timeout                    */
-    uint16_t CLKHOLD:1;        /*!< bit:      7  Clock Hold                         */
-    uint16_t MEXTTOUT:1;       /*!< bit:      8  Master SCL Low Extend Timeout      */
-    uint16_t SEXTTOUT:1;       /*!< bit:      9  Slave SCL Low Extend Timeout       */
-    uint16_t LENERR:1;         /*!< bit:     10  Length Error                       */
-    uint16_t :5;               /*!< bit: 11..15  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint16_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CM_STATUS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CM_STATUS_OFFSET   0x1A         /**< \brief (SERCOM_I2CM_STATUS offset) I2CM Status */
-#define SERCOM_I2CM_STATUS_RESETVALUE 0x0000ul     /**< \brief (SERCOM_I2CM_STATUS reset_value) I2CM Status */
-
-#define SERCOM_I2CM_STATUS_BUSERR_Pos 0            /**< \brief (SERCOM_I2CM_STATUS) Bus Error */
-#define SERCOM_I2CM_STATUS_BUSERR   (0x1ul << SERCOM_I2CM_STATUS_BUSERR_Pos)
-#define SERCOM_I2CM_STATUS_ARBLOST_Pos 1            /**< \brief (SERCOM_I2CM_STATUS) Arbitration Lost */
-#define SERCOM_I2CM_STATUS_ARBLOST  (0x1ul << SERCOM_I2CM_STATUS_ARBLOST_Pos)
-#define SERCOM_I2CM_STATUS_RXNACK_Pos 2            /**< \brief (SERCOM_I2CM_STATUS) Received Not Acknowledge */
-#define SERCOM_I2CM_STATUS_RXNACK   (0x1ul << SERCOM_I2CM_STATUS_RXNACK_Pos)
-#define SERCOM_I2CM_STATUS_BUSSTATE_Pos 4            /**< \brief (SERCOM_I2CM_STATUS) Bus State */
-#define SERCOM_I2CM_STATUS_BUSSTATE_Msk (0x3ul << SERCOM_I2CM_STATUS_BUSSTATE_Pos)
-#define SERCOM_I2CM_STATUS_BUSSTATE(value) ((SERCOM_I2CM_STATUS_BUSSTATE_Msk & ((value) << SERCOM_I2CM_STATUS_BUSSTATE_Pos)))
-#define SERCOM_I2CM_STATUS_LOWTOUT_Pos 6            /**< \brief (SERCOM_I2CM_STATUS) SCL Low Timeout */
-#define SERCOM_I2CM_STATUS_LOWTOUT  (0x1ul << SERCOM_I2CM_STATUS_LOWTOUT_Pos)
-#define SERCOM_I2CM_STATUS_CLKHOLD_Pos 7            /**< \brief (SERCOM_I2CM_STATUS) Clock Hold */
-#define SERCOM_I2CM_STATUS_CLKHOLD  (0x1ul << SERCOM_I2CM_STATUS_CLKHOLD_Pos)
-#define SERCOM_I2CM_STATUS_MEXTTOUT_Pos 8            /**< \brief (SERCOM_I2CM_STATUS) Master SCL Low Extend Timeout */
-#define SERCOM_I2CM_STATUS_MEXTTOUT (0x1ul << SERCOM_I2CM_STATUS_MEXTTOUT_Pos)
-#define SERCOM_I2CM_STATUS_SEXTTOUT_Pos 9            /**< \brief (SERCOM_I2CM_STATUS) Slave SCL Low Extend Timeout */
-#define SERCOM_I2CM_STATUS_SEXTTOUT (0x1ul << SERCOM_I2CM_STATUS_SEXTTOUT_Pos)
-#define SERCOM_I2CM_STATUS_LENERR_Pos 10           /**< \brief (SERCOM_I2CM_STATUS) Length Error */
-#define SERCOM_I2CM_STATUS_LENERR   (0x1ul << SERCOM_I2CM_STATUS_LENERR_Pos)
-#define SERCOM_I2CM_STATUS_MASK     0x07F7ul     /**< \brief (SERCOM_I2CM_STATUS) MASK Register */
-
-/* -------- SERCOM_I2CS_STATUS : (SERCOM Offset: 0x1A) (R/W 16) I2CS I2CS Status -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint16_t BUSERR:1;         /*!< bit:      0  Bus Error                          */
-    uint16_t COLL:1;           /*!< bit:      1  Transmit Collision                 */
-    uint16_t RXNACK:1;         /*!< bit:      2  Received Not Acknowledge           */
-    uint16_t DIR:1;            /*!< bit:      3  Read/Write Direction               */
-    uint16_t SR:1;             /*!< bit:      4  Repeated Start                     */
-    uint16_t :1;               /*!< bit:      5  Reserved                           */
-    uint16_t LOWTOUT:1;        /*!< bit:      6  SCL Low Timeout                    */
-    uint16_t CLKHOLD:1;        /*!< bit:      7  Clock Hold                         */
-    uint16_t :1;               /*!< bit:      8  Reserved                           */
-    uint16_t SEXTTOUT:1;       /*!< bit:      9  Slave SCL Low Extend Timeout       */
-    uint16_t HS:1;             /*!< bit:     10  High Speed                         */
-    uint16_t :5;               /*!< bit: 11..15  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint16_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CS_STATUS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CS_STATUS_OFFSET   0x1A         /**< \brief (SERCOM_I2CS_STATUS offset) I2CS Status */
-#define SERCOM_I2CS_STATUS_RESETVALUE 0x0000ul     /**< \brief (SERCOM_I2CS_STATUS reset_value) I2CS Status */
-
-#define SERCOM_I2CS_STATUS_BUSERR_Pos 0            /**< \brief (SERCOM_I2CS_STATUS) Bus Error */
-#define SERCOM_I2CS_STATUS_BUSERR   (0x1ul << SERCOM_I2CS_STATUS_BUSERR_Pos)
-#define SERCOM_I2CS_STATUS_COLL_Pos 1            /**< \brief (SERCOM_I2CS_STATUS) Transmit Collision */
-#define SERCOM_I2CS_STATUS_COLL     (0x1ul << SERCOM_I2CS_STATUS_COLL_Pos)
-#define SERCOM_I2CS_STATUS_RXNACK_Pos 2            /**< \brief (SERCOM_I2CS_STATUS) Received Not Acknowledge */
-#define SERCOM_I2CS_STATUS_RXNACK   (0x1ul << SERCOM_I2CS_STATUS_RXNACK_Pos)
-#define SERCOM_I2CS_STATUS_DIR_Pos  3            /**< \brief (SERCOM_I2CS_STATUS) Read/Write Direction */
-#define SERCOM_I2CS_STATUS_DIR      (0x1ul << SERCOM_I2CS_STATUS_DIR_Pos)
-#define SERCOM_I2CS_STATUS_SR_Pos   4            /**< \brief (SERCOM_I2CS_STATUS) Repeated Start */
-#define SERCOM_I2CS_STATUS_SR       (0x1ul << SERCOM_I2CS_STATUS_SR_Pos)
-#define SERCOM_I2CS_STATUS_LOWTOUT_Pos 6            /**< \brief (SERCOM_I2CS_STATUS) SCL Low Timeout */
-#define SERCOM_I2CS_STATUS_LOWTOUT  (0x1ul << SERCOM_I2CS_STATUS_LOWTOUT_Pos)
-#define SERCOM_I2CS_STATUS_CLKHOLD_Pos 7            /**< \brief (SERCOM_I2CS_STATUS) Clock Hold */
-#define SERCOM_I2CS_STATUS_CLKHOLD  (0x1ul << SERCOM_I2CS_STATUS_CLKHOLD_Pos)
-#define SERCOM_I2CS_STATUS_SEXTTOUT_Pos 9            /**< \brief (SERCOM_I2CS_STATUS) Slave SCL Low Extend Timeout */
-#define SERCOM_I2CS_STATUS_SEXTTOUT (0x1ul << SERCOM_I2CS_STATUS_SEXTTOUT_Pos)
-#define SERCOM_I2CS_STATUS_HS_Pos   10           /**< \brief (SERCOM_I2CS_STATUS) High Speed */
-#define SERCOM_I2CS_STATUS_HS       (0x1ul << SERCOM_I2CS_STATUS_HS_Pos)
-#define SERCOM_I2CS_STATUS_MASK     0x06DFul     /**< \brief (SERCOM_I2CS_STATUS) MASK Register */
-
-/* -------- SERCOM_SPI_STATUS : (SERCOM Offset: 0x1A) (R/W 16) SPI SPI Status -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint16_t :2;               /*!< bit:  0.. 1  Reserved                           */
-    uint16_t BUFOVF:1;         /*!< bit:      2  Buffer Overflow                    */
-    uint16_t :13;              /*!< bit:  3..15  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint16_t reg;                /*!< Type      used for register access              */
-} SERCOM_SPI_STATUS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_SPI_STATUS_OFFSET    0x1A         /**< \brief (SERCOM_SPI_STATUS offset) SPI Status */
-#define SERCOM_SPI_STATUS_RESETVALUE 0x0000ul     /**< \brief (SERCOM_SPI_STATUS reset_value) SPI Status */
-
-#define SERCOM_SPI_STATUS_BUFOVF_Pos 2            /**< \brief (SERCOM_SPI_STATUS) Buffer Overflow */
-#define SERCOM_SPI_STATUS_BUFOVF    (0x1ul << SERCOM_SPI_STATUS_BUFOVF_Pos)
-#define SERCOM_SPI_STATUS_MASK      0x0004ul     /**< \brief (SERCOM_SPI_STATUS) MASK Register */
-
-/* -------- SERCOM_USART_STATUS : (SERCOM Offset: 0x1A) (R/W 16) USART USART Status -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint16_t PERR:1;           /*!< bit:      0  Parity Error                       */
-    uint16_t FERR:1;           /*!< bit:      1  Frame Error                        */
-    uint16_t BUFOVF:1;         /*!< bit:      2  Buffer Overflow                    */
-    uint16_t CTS:1;            /*!< bit:      3  Clear To Send                      */
-    uint16_t ISF:1;            /*!< bit:      4  Inconsistent Sync Field            */
-    uint16_t COLL:1;           /*!< bit:      5  Collision Detected                 */
-    uint16_t :10;              /*!< bit:  6..15  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint16_t reg;                /*!< Type      used for register access              */
-} SERCOM_USART_STATUS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_USART_STATUS_OFFSET  0x1A         /**< \brief (SERCOM_USART_STATUS offset) USART Status */
-#define SERCOM_USART_STATUS_RESETVALUE 0x0000ul     /**< \brief (SERCOM_USART_STATUS reset_value) USART Status */
-
-#define SERCOM_USART_STATUS_PERR_Pos 0            /**< \brief (SERCOM_USART_STATUS) Parity Error */
-#define SERCOM_USART_STATUS_PERR    (0x1ul << SERCOM_USART_STATUS_PERR_Pos)
-#define SERCOM_USART_STATUS_FERR_Pos 1            /**< \brief (SERCOM_USART_STATUS) Frame Error */
-#define SERCOM_USART_STATUS_FERR    (0x1ul << SERCOM_USART_STATUS_FERR_Pos)
-#define SERCOM_USART_STATUS_BUFOVF_Pos 2            /**< \brief (SERCOM_USART_STATUS) Buffer Overflow */
-#define SERCOM_USART_STATUS_BUFOVF  (0x1ul << SERCOM_USART_STATUS_BUFOVF_Pos)
-#define SERCOM_USART_STATUS_CTS_Pos 3            /**< \brief (SERCOM_USART_STATUS) Clear To Send */
-#define SERCOM_USART_STATUS_CTS     (0x1ul << SERCOM_USART_STATUS_CTS_Pos)
-#define SERCOM_USART_STATUS_ISF_Pos 4            /**< \brief (SERCOM_USART_STATUS) Inconsistent Sync Field */
-#define SERCOM_USART_STATUS_ISF     (0x1ul << SERCOM_USART_STATUS_ISF_Pos)
-#define SERCOM_USART_STATUS_COLL_Pos 5            /**< \brief (SERCOM_USART_STATUS) Collision Detected */
-#define SERCOM_USART_STATUS_COLL    (0x1ul << SERCOM_USART_STATUS_COLL_Pos)
-#define SERCOM_USART_STATUS_MASK    0x003Ful     /**< \brief (SERCOM_USART_STATUS) MASK Register */
-
-/* -------- SERCOM_I2CM_SYNCBUSY : (SERCOM Offset: 0x1C) (R/  32) I2CM I2CM Syncbusy -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t SWRST:1;          /*!< bit:      0  Software Reset Synchronization Busy */
-    uint32_t ENABLE:1;         /*!< bit:      1  SERCOM Enable Synchronization Busy */
-    uint32_t SYSOP:1;          /*!< bit:      2  System Operation Synchronization Busy */
-    uint32_t :29;              /*!< bit:  3..31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CM_SYNCBUSY_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CM_SYNCBUSY_OFFSET 0x1C         /**< \brief (SERCOM_I2CM_SYNCBUSY offset) I2CM Syncbusy */
-#define SERCOM_I2CM_SYNCBUSY_RESETVALUE 0x00000000ul /**< \brief (SERCOM_I2CM_SYNCBUSY reset_value) I2CM Syncbusy */
-
-#define SERCOM_I2CM_SYNCBUSY_SWRST_Pos 0            /**< \brief (SERCOM_I2CM_SYNCBUSY) Software Reset Synchronization Busy */
-#define SERCOM_I2CM_SYNCBUSY_SWRST  (0x1ul << SERCOM_I2CM_SYNCBUSY_SWRST_Pos)
-#define SERCOM_I2CM_SYNCBUSY_ENABLE_Pos 1            /**< \brief (SERCOM_I2CM_SYNCBUSY) SERCOM Enable Synchronization Busy */
-#define SERCOM_I2CM_SYNCBUSY_ENABLE (0x1ul << SERCOM_I2CM_SYNCBUSY_ENABLE_Pos)
-#define SERCOM_I2CM_SYNCBUSY_SYSOP_Pos 2            /**< \brief (SERCOM_I2CM_SYNCBUSY) System Operation Synchronization Busy */
-#define SERCOM_I2CM_SYNCBUSY_SYSOP  (0x1ul << SERCOM_I2CM_SYNCBUSY_SYSOP_Pos)
-#define SERCOM_I2CM_SYNCBUSY_MASK   0x00000007ul /**< \brief (SERCOM_I2CM_SYNCBUSY) MASK Register */
-
-/* -------- SERCOM_I2CS_SYNCBUSY : (SERCOM Offset: 0x1C) (R/  32) I2CS I2CS Syncbusy -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-typedef union {
-  struct {
-    uint32_t SWRST:1;          /*!< bit:      0  Software Reset Synchronization Busy */
-    uint32_t ENABLE:1;         /*!< bit:      1  SERCOM Enable Synchronization Busy */
-    uint32_t :30;              /*!< bit:  2..31  Reserved                           */
-  } bit;                       /*!< Structure used for bit  access                  */
-  uint32_t reg;                /*!< Type      used for register access              */
-} SERCOM_I2CS_SYNCBUSY_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-#define SERCOM_I2CS_SYNCBUSY_OFFSET 0x1C         /**< \brief (SERCOM_I2CS_SYNCBUSY offset) I2CS Syncbusy */
-#define SERCOM_I2CS_SYNCBUSY_RESETVALUE 0x00000000ul /**< \brief (SERCOM_I2CS_SYNCBUSY reset_value) I2CS Syncbusy */
-
-#define SERCOM_I2CS_SYNCBUSY_SWRST_Pos 0            /**< \brief (SERCOM_I2CS_SYNCBUSY) Software Reset Synchronization Busy */
-#define SERCOM_I2CS_SYNCBUSY_SWRST  (0x1ul << SERCOM_I2CS_SYNCBUSY_SWRST_Pos)
-#define SERCOM_I2CS_SYNCBUSY_ENABLE_Pos 1            /**< \brief (SERCOM_I2CS_SYNCBUSY) SER

<TRUNCATED>


Mime
View raw message