mxnet-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Lv, Tao A" <tao.a...@intel.com>
Subject RE: [VOTE] Release Apache MXNet (incubating) version 1.4.1.rc0
Date Mon, 06 May 2019 01:59:01 GMT
Hi Kellen, does the problem still exist for you? I just built mxnet 1.4.1rc0 + mkldnn from
source with cmake on my centos machine and everything works well:

-- Downloading MKLML...
-- [download 0% complete]
...
-- [download 100% complete]
-- Setting MKLROOT path to /home/lvtao/Workspace/mxnet-official/build/mklml/mklml_lnx_2019.0.1.20180928
-- CMAKE_BUILD_TYPE is unset, defaulting to Release
-- Detecting Intel(R) MKL: trying mklml_intel
-- Intel(R) MKL: include /home/lvtao/Workspace/mxnet-official/build/mklml/mklml_lnx_2019.0.1.20180928/include
-- Intel(R) MKL: lib /home/lvtao/Workspace/mxnet-official/build/mklml/mklml_lnx_2019.0.1.20180928/lib/libmklml_intel.so

Thank you Junru for managing this release. We also verified MKL-DNN related tests, convergence,
quantization and FP32/INT8 performance. They all look good to me.

-tao

-----Original Message-----
From: kellen sunderland [mailto:kellen.sunderland@gmail.com] 
Sent: Monday, May 6, 2019 3:20 AM
To: dev@mxnet.incubator.apache.org
Subject: Re: [VOTE] Release Apache MXNet (incubating) version 1.4.1.rc0

I gave checking a shot but am now getting

-- Downloading MKLML...
CMake Error at cmake/DownloadMKLML.cmake:62 (file):
  file DOWNLOAD HASH mismatch

Assuming that's a transient mkl dep download error, I'll try again later.


On Sat, May 4, 2019 at 12:09 AM Junru Shao <junrushao1994@gmail.com> wrote:

> Thank you Anirudh for your quick response! I will change the result 
> accordingly :-)
>
> On Fri, May 3, 2019 at 11:58 PM Anirudh Subramanian 
> <anirudh2290@gmail.com
> >
> wrote:
>
> > No worries, maybe its just something with my setup.
> > Moving my vote to +0, pending someone else check.
> >
> > On Fri, May 3, 2019 at 11:39 PM Junru Shao <junrushao1994@gmail.com>
> > wrote:
> >
> > > Hi Anirudh,
> > >
> > > Thanks for reporting this!
> > >
> > > I verified on my EC2 machine for the second time. It perfectly 
> > > builds
> > with
> > > your commands. It is a bit weird...I noticed that there is a 
> > > subtle difference that my ninja progress bar is like "[xxx/506]", 
> > > while yours
> is
> > > "[xxx/488]". I am not sure if there is anything different between 
> > > our settings.
> > >
> > > My understanding is that cmake should work because it is tested in 
> > > our
> CI
> > > system under "ci/jenkins/incubator-mxnet" (
> > >
> > >
> >
> http://jenkins.mxnet-ci.amazon-ml.com/blue/organizations/jenkins/incub
> ator-mxnet/detail/v1.4.x/201/pipeline
> > > ).
> > >
> > > It will be much appreciated if someone could help confirm whether 
> > > cmake works on their side.
> > >
> > > Thanks,
> > > Junru
> > >
> > >
> > > On Fri, May 3, 2019 at 9:43 PM Anirudh Subramanian <
> > anirudh2290@gmail.com>
> > > wrote:
> > >
> > > > Hi Junru,
> > > >
> > > > I am on v1.4.x , and my dmlc-core commit is this one :
> > > >
> > > >
> > >
> >
> https://github.com/dmlc/dmlc-core/tree/0a0e8addf92e1287fd7a25c6314016b
> 8c0138dee
> > > >
> > > > Anirudh
> > > >
> > > > On Fri, May 3, 2019 at 8:30 PM Junru Shao 
> > > > <junrushao1994@gmail.com>
> > > wrote:
> > > >
> > > > > Hey Anirudh,
> > > > >
> > > > > Although the vote has been closed, I am very interested in 
> > > > > digging
> > into
> > > > > this issue.
> > > > >
> > > > > I build on my EC2 machine using your instructions, and it 
> > > > > seems
> that
> > > > > everything is working fine...
> > > > >
> > > > > Then, I noticed that your issue seems to be related to 
> > > > > unittests in dmlc-core, not in mxnet. Could you kindly check 
> > > > > the submodule git
> > hash?
> > > > > Also, could you check if you are testing on v1.4.x branch?
> > > > >
> > > > > Thanks,
> > > > > Junru
> > > > >
> > > > >
> > > > >
> > > > > On Fri, May 3, 2019 at 4:33 PM Anirudh Subramanian <
> > > > anirudh2290@gmail.com>
> > > > > wrote:
> > > > >
> > > > > > -1 (binding)
> > > > > >
> > > > > > Is the cmake build failing for the 1.4.1 release tag ? Is 
> > > > > > this a
> > > known
> > > > > > issue ?
> > > > > >
> > > > > > Did the following:
> > > > > >
> > > > > > cd build && cmake VERBOSE=1 -DUSE_CUDA=ON -DUSE_CUDNN=ON
> > > > -DUSE_OPENMP=ON
> > > > > > -DCMAKE_BUILD_TYPE=Debug -DUSE_DIST_KVSTORE=0 -DUSE_OPENCV=1

> > > > > > -DCUDA_TOOLKIT_ROOT_DIR=/usr/local/cuda
> > -DCUDNN_ROOT=/usr/local/cuda
> > > > > > -DUSE_MKLDNN=1 -DUSE_MKL_IF_AVAILABLE=1 -DUSE_MKLML_MKL=1
> > > -DUSE_ASAN=0
> > > > > > -GNinja -DUSE_OPERATOR_TUNING=1 -DUSE_CPP_PACKAGE=0
> > > > -DCUDA_ARCH_NAME=Auto
> > > > > > .. && ninja -v
> > > > > >
> > > > > > [272/488] : && /usr/bin/c++   -Wall -Wno-unknown-pragmas
-fPIC -g
> > -O0
> > > > > > -msse2 -std=c++11 -fopenmp -g  -pthread
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_lockfree.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_param.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_parser.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_array_view.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_any.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_config.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_threaditer.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_serializer.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_threaditer_exc_handling.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_inputsplit.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_logging.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_json.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_optional.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_main.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_env.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_thread_group.cc.o
> > > > > > -o 3rdparty/dmlc-core/test/unittest/dmlc_unit_tests  
> > > > > > -rdynamic lib/libgtestd.a 3rdparty/dmlc-core/libdmlc.a -lpthread
&& :
> > > > > > FAILED: : && /usr/bin/c++   -Wall -Wno-unknown-pragmas
-fPIC -g
> -O0
> > > > > -msse2
> > > > > > -std=c++11 -fopenmp -g  -pthread
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_lockfree.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_param.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_parser.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_array_view.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_any.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_config.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_threaditer.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_serializer.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_threaditer_exc_handling.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_inputsplit.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_logging.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_json.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_optional.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_main.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_env.cc.o
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unitte
> st_thread_group.cc.o
> > > > > > -o 3rdparty/dmlc-core/test/unittest/dmlc_unit_tests  
> > > > > > -rdynamic lib/libgtestd.a 3rdparty/dmlc-core/libdmlc.a -lpthread
&& :
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> 3rdparty/dmlc-core/test/unittest/CMakeFiles/dmlc_unit_tests.dir/unittest_logging.cc.o:
> > > > > > In function `Logging_basics_Test::TestBody()':
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /home/ubuntu/experimentals/master_mxnet/build/../3rdparty/dmlc-core/test/unittest/unittest_logging.cc:19:
> > > > > > undefined reference to 
> > > > > > `testing::internal::DeathTest::Create(char
> > > > const*,
> > > > > > testing::internal::RE const*, char const*, int, 
> > > > > > testing::internal::DeathTest**)'
> > > > > > collect2: error: ld returned 1 exit status
> > > > > >
> > > > > > Anirudh
> > > > > >
> > > > > > On Fri, May 3, 2019 at 8:04 AM kellen sunderland < 
> > > > > > kellen.sunderland@gmail.com> wrote:
> > > > > >
> > > > > > > No problem Damien, glad to have you helping us validating

> > > > > > > the
> > > > release.
> > > > > > > Just wanted to make suer we have enough votes to pass the
> general
> > > > vote
> > > > > > (the
> > > > > > > next release step) and with Sheng I think we should.
> > > > > > >
> > > > > > > On Fri, May 3, 2019 at 7:52 AM Damien Stanton <
> > > > > damien.stanton@gmail.com>
> > > > > > > wrote:
> > > > > > >
> > > > > > > > Ah, I misunderstood the binding/non-binding distinction.

> > > > > > > > I am
> > > not a
> > > > > > PPMC
> > > > > > > > member, so my vote is non-binding.
> > > > > > > >
> > > > > > > > Best,
> > > > > > > > Damien
> > > > > > > >
> > > > > > > > On Fri, May 3, 2019 at 3:19 AM kellen sunderland <

> > > > > > > > kellen.sunderland@gmail.com> wrote:
> > > > > > > >
> > > > > > > > > Hi Junru could you give a quick summary of the
binding 
> > > > > > > > > /
> > > > > non-binding
> > > > > > > > votes.
> > > > > > > > >
> > > > > > > > > Damien just want to confirm, are you a member
of the 
> > > > > > > > > PPMC
> for
> > > > > MXNet?
> > > > > > > > > Usually committers or community members (like
most of 
> > > > > > > > > us)
> are
> > > > > > > encouraged
> > > > > > > > to
> > > > > > > > > test and vote, but technically count as non-binding

> > > > > > > > > for
> > > releases.
> > > > > > > > >
> > > > > > > > > Sheng can we assume you're +1 on the release?
> > > > > > > > >
> > > > > > > > > On Fri, May 3, 2019 at 12:09 AM Junru Shao <
> > > > > junrushao1994@gmail.com>
> > > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > > Hi folks,
> > > > > > > > > >
> > > > > > > > > > So far we have collected enough binding
votes. Thank 
> > > > > > > > > > you
> > guys
> > > > for
> > > > > > the
> > > > > > > > > hard
> > > > > > > > > > work testing the release!
> > > > > > > > > >
> > > > > > > > > > The vote on dev@ is closed on May 02 23:59:59
(PST).
> Next,
> > > we
> > > > > are
> > > > > > > > going
> > > > > > > > > to
> > > > > > > > > > vote for the Apache MXNet (incubating) release
1.4.1 
> > > > > > > > > > on
> > > > general@
> > > > > > > > > tomorrow,
> > > > > > > > > > which starts on May 3 2019, 23:59:59 PST,
and ends 
> > > > > > > > > > on May
> > 07
> > > > > 2019,
> > > > > > > > > 23:59:59
> > > > > > > > > > PST.
> > > > > > > > > >
> > > > > > > > > > Best,
> > > > > > > > > > Junru
> > > > > > > > > >
> > > > > > > > > > On Thu, May 2, 2019 at 11:29 PM Aston Zhang
<
> > > > > astonlzhang@gmail.com
> > > > > > >
> > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > > +1 (non-binding)
> > > > > > > > > > >
> > > > > > > > > > > Passed all the code at zh.d2l.ai
> > > > > > > > > > >
> > > > > > > > > > > On Thu, May 2, 2019 at 1:46 PM Joshua
Z. Zhang <
> > > > > > > cheungchih@gmail.com
> > > > > > > > >
> > > > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > > +1 (non-binding)
> > > > > > > > > > > >
> > > > > > > > > > > > Build from source with cuda/cudnn.
> > > > > > > > > > > >
> > > > > > > > > > > > - All tests passed
> > > > > > > > > > > > - GluonCV unittest scripts passed
> > > > > > > > > > > > - GluonCV training scripts passed
> > > > > > > > > > > > - No issue with python multiprocessing
> > > > > > > > > > > >
> > > > > > > > > > > > Best,
> > > > > > > > > > > > Zhi
> > > > > > > > > > > > > On May 2, 2019, at 11:34
AM, kellen sunderland 
> > > > > > > > > > > > > <
> > > > > > > > > > > > kellen.sunderland@gmail.com>
wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > +1 (non-binding)
> > > > > > > > > > > > >
> > > > > > > > > > > > > I checked TRT integration
builds and tests pass.
> > > > > > > > > > > > > MD5s
> > > > > > > > > > > > > Sigs look good.
> > > > > > > > > > > > >
> > > > > > > > > > > > > -Kellen
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Thu, May 2, 2019 at 10:51
AM Damien Stanton 
> > > > > > > > > > > > > <
> > > > > > > > > > > damien.stanton@gmail.com
> > > > > > > > > > > > >
> > > > > > > > > > > > > wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > >> +1 (binding)
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> Built from source / Scala
/ Clojure. All 
> > > > > > > > > > > > >> tests
> pass.
> > > The
> > > > > > only
> > > > > > > > > issue
> > > > > > > > > > of
> > > > > > > > > > > > >> minor note: The macOS
build guide indicates a
> > > directive
> > > > > > `brew
> > > > > > > > > > install
> > > > > > > > > > > > >> opencv` however this
installs OpenCV 4, which 
> > > > > > > > > > > > >> is
> > > > currently
> > > > > > > > > > > incompatible
> > > > > > > > > > > > >> with mxnet and causes
a failed build. The 
> > > > > > > > > > > > >> guide
> > should
> > > > > > specify
> > > > > > > > > `brew
> > > > > > > > > > > > >> install opencv@3` until/if
version 4 is
> supported.
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> Best,
> > > > > > > > > > > > >> Damien
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> On Thu, May 2, 2019 at
12:53 PM Lai Wei <
> > > > > > royweilai@gmail.com>
> > > > > > > > > > wrote:
> > > > > > > > > > > > >>
> > > > > > > > > > > > >>> +1
> > > > > > > > > > > > >>>
> > > > > > > > > > > > >>> Built from source
and tested keras-mxnet 
> > > > > > > > > > > > >>> working
> > > fine.
> > > > > > > > > > > > >>>
> > > > > > > > > > > > >>> Best Regards
> > > > > > > > > > > > >>>
> > > > > > > > > > > > >>> Lai
> > > > > > > > > > > > >>>
> > > > > > > > > > > > >>>
> > > > > > > > > > > > >>> On Wed, May 1, 2019
at 4:22 PM Carin Meier <
> > > > > > > > carinmeier@gmail.com
> > > > > > > > > >
> > > > > > > > > > > > wrote:
> > > > > > > > > > > > >>>
> > > > > > > > > > > > >>>> + 1 (binding)
> > > > > > > > > > > > >>>>
> > > > > > > > > > > > >>>> Built Scala/
Clojure and ran tests
> > > > > > > > > > > > >>>>
> > > > > > > > > > > > >>>> On Wed, May 1,
2019 at 7:06 PM Aaron 
> > > > > > > > > > > > >>>> Markham <
> > > > > > > > > > > > >> aaron.s.markham@gmail.com>
> > > > > > > > > > > > >>>> wrote:
> > > > > > > > > > > > >>>>
> > > > > > > > > > > > >>>>> Make that
+1 (non-binding)
> > > > > > > > > > > > >>>>>
> > > > > > > > > > > > >>>>> On Wed, May
1, 2019 at 3:42 PM Aaron 
> > > > > > > > > > > > >>>>> Markham <
> > > > > > > > > > > > >>> aaron.s.markham@gmail.com>
> > > > > > > > > > > > >>>>> wrote:
> > > > > > > > > > > > >>>>>>
> > > > > > > > > > > > >>>>>> +1 (binding)
> > > > > > > > > > > > >>>>>>
> > > > > > > > > > > > >>>>>> * Built
with GPU and tested the first 
> > > > > > > > > > > > >>>>>> part
of
> > the
> > > > ssd
> > > > > > > > example.
> > > > > > > > > > > > >>>>>> * Built
with GPU / cross-compiled to arm8 
> > > > > > > > > > > > >>>>>> for
> > > > Jetson.
> > > > > > > > > > > > >>>>>> * Built
Scala/Java on top of the
> cross-compiled
> > > arm8
> > > > > > (ran
> > > > > > > > into
> > > > > > > > > > > > >>> trouble
> > > > > > > > > > > > >>>>>> here,
but I think this is not popular 
> > > > > > > > > > > > >>>>>> enough
> yet
> > > to
> > > > > > derail
> > > > > > > > > > things,
> > > > > > > > > > > > >>>>>> plus
there are workarounds)
> > > > > > > > > > > > >>>>>> * Built
on CPU instance and tested docs.
> > > > > > > > > > > > >>>>>>
> > > > > > http://34.201.8.176/versions/1.4.1/api/python/io/io.html
> > > > > > > > > > > > >>>>>> I don't
see anything specific being 
> > > > > > > > > > > > >>>>>> different
> in
> > > > this
> > > > > > > patch
> > > > > > > > > for
> > > > > > > > > > > > >> docs,
> > > > > > > > > > > > >>>>>> so hard
to tell if there's an issue. I'll
> assume
> > > not
> > > > > > given
> > > > > > > > the
> > > > > > > > > > > > >>>>>> successful
generation of the API docs.
> > > > > > > > > > > > >>>>>>
> > > > > > > > > > > > >>>>>>
> > > > > > > > > > > > >>>>>> On Wed,
May 1, 2019 at 1:28 PM Pedro 
> > > > > > > > > > > > >>>>>> Larroy
<pedro.larroy.lists@gmail.com> wrote:
> > > > > > > > > > > > >>>>>>>
> > > > > > > > > > > > >>>>>>> +1
(non-binding)
> > > > > > > > > > > > >>>>>>>
> > > > > > > > > > > > >>>>>>> Tried
CPU build + C++ tests + 714 Python 
> > > > > > > > > > > > >>>>>>> unit
> > > tests
> > > > > in
> > > > > > > > 605s.
> > > > > > > > > > > > >>>>>>> ARMv7
build + small unit test in QEMU + 
> > > > > > > > > > > > >>>>>>> ARMv8
> > > > builds.
> > > > > > > > > > > > >>>>>>>
> > > > > > > > > > > > >>>>>>> Thanks.
Regards
> > > > > > > > > > > > >>>>>>>
> > > > > > > > > > > > >>>>>>> Pedro.
> > > > > > > > > > > > >>>>>>>
> > > > > > > > > > > > >>>>>>> On
Wed, May 1, 2019 at 10:41 AM Qing Lan 
> > > > > > > > > > > > >>>>>>> <
> > > > > > > > > lanking520@live.com>
> > > > > > > > > > > > >>>> wrote:
> > > > > > > > > > > > >>>>>>>>
> > > > > > > > > > > > >>>>>>>>
+1 (binding)
> > > > > > > > > > > > >>>>>>>>
> > > > > > > > > > > > >>>>>>>>
build from source works for OSX and 
> > > > > > > > > > > > >>>>>>>>
Ubuntu
> CPU
> > > > > > > > > > > > >>>>>>>>
Scala build/test successfully with 
> > > > > > > > > > > > >>>>>>>>
Dynamic
> > link
> > > > and
> > > > > > > static
> > > > > > > > > > > > >> link.
> > > > > > > > > > > > >>>>>>>>
> > > > > > > > > > > > >>>>>>>>
Thanks, Qing
> > > > > > > > > > > > >>>>>>>>
> > > > > > > > > > > > >>>>>>>>
________________________________
> > > > > > > > > > > > >>>>>>>>
From: Sheng Zha <zhasheng@apache.org>
> > > > > > > > > > > > >>>>>>>>
Sent: Wednesday, May 1, 2019 13:14
> > > > > > > > > > > > >>>>>>>>
To: dev@mxnet.apache.org
> > > > > > > > > > > > >>>>>>>>
Subject: Re: [VOTE] Release Apache 
> > > > > > > > > > > > >>>>>>>>
MXNet
> > > > > (incubating)
> > > > > > > > > version
> > > > > > > > > > > > >>>>> 1.4.1.rc0
> > > > > > > > > > > > >>>>>>>>
> > > > > > > > > > > > >>>>>>>>
Hi all,
> > > > > > > > > > > > >>>>>>>>
> > > > > > > > > > > > >>>>>>>>
Reminder that the vote for 1.4.1 
> > > > > > > > > > > > >>>>>>>>
release is
> > > still
> > > > > > > ongoing.
> > > > > > > > > If
> > > > > > > > > > > > >> you
> > > > > > > > > > > > >>>>> can, please
help out. Thank you.
> > > > > > > > > > > > >>>>>>>>
> > > > > > > > > > > > >>>>>>>>
-sz
> > > > > > > > > > > > >>>>>>>>
> > > > > > > > > > > > >>>>>>>>
On 2019/04/30 06:51:45, Junru Shao <
> > > > > > > > junrushao1994@gmail.com
> > > > > > > > > >
> > > > > > > > > > > > >>>> wrote:
> > > > > > > > > > > > >>>>>>>>>
Dear MXNet community,
> > > > > > > > > > > > >>>>>>>>>
> > > > > > > > > > > > >>>>>>>>>
This is the 3-day vote to release 
> > > > > > > > > > > > >>>>>>>>>
Apache
> > MXNet
> > > > > > > > (incubating)
> > > > > > > > > > > > >>>>> version v1.4.1.
> > > > > > > > > > > > >>>>>>>>>
The voting on dev@ list will start Apr 
> > > > > > > > > > > > >>>>>>>>>
29
> > > > 23:59:59
> > > > > > > (PST)
> > > > > > > > > and
> > > > > > > > > > > > >>>>> close on
May
> > > > > > > > > > > > >>>>>>>>>
02 23:59:59.
> > > > > > > > > > > > >>>>>>>>>
> > > > > > > > > > > > >>>>>>>>>
Below are links to
> > > > > > > > > > > > >>>>>>>>>
1) Release notes:
> > > > > > > > > > > > >>>>>>>>>
> > > > > > > > > > > > >>>>>
> > > > > > > > > > > > >>>>
> > > > > > > > > > > > >>>
> > > > > > > > > > > > >>
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> https://cwiki.apache.org/confluence/display/MXNET/Apache+MXNet+%28incu
> bating%29+1.4.1+Release+Notes
> > > > > > > > > > > > >>>>>>>>>
.
> > > > > > > > > > > > >>>>>>>>>
2) Release Candidate:
> > > > > > > > > > > > >>>>>>>>>
> > > > > > > > > > > > >>>
> > > > > > > >
> > https://github.com/apache/incubator-mxnet/releases/tag/1.4.1.rc0
> > > > > > > > > > > > >>>> .
> > > > > > > > > > > > >>>>>>>>>
3) Source and signatures on Apache 
> > > > > > > > > > > > >>>>>>>>>
dist
> > server:
> > > > > > > > > > > > >>>>>>>>>
> > > > > > > > > > > > >>>>
> > > > > > > > >
> > > > https://dist.apache.org/repos/dist/dev/incubator/mxnet/1.4.1.rc0
> > > > /
> > > > > > > > > > .
> > > > > > > > > > > > >>>>>>>>>
> > > > > > > > > > > > >>>>>>>>>
Please remember to TEST first before 
> > > > > > > > > > > > >>>>>>>>>
voting
> > > > > > > accordingly:
> > > > > > > > > > > > >>>>>>>>>
+1 = approve
> > > > > > > > > > > > >>>>>>>>>
+0 = no opinion
> > > > > > > > > > > > >>>>>>>>>
-1 = disapprove (provide reason)
> > > > > > > > > > > > >>>>>>>>>
> > > > > > > > > > > > >>>>>>>>>
Best regards, Junru Shao
> > > > > > > > > > > > >>>>>>>>>
> > > > > > > > > > > > >>>>>
> > > > > > > > > > > > >>>>
> > > > > > > > > > > > >>>
> > > > > > > > > > > > >>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
Mime
View raw message