mesos-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Alex Rukletsov <a...@mesosphere.io>
Subject Re: Unable to install Mesos on Ubuntu 14.04. Error during 'make'
Date Fri, 07 Nov 2014 12:37:51 GMT
Got it. I was wrong (thanks Till for correcting me on IRC!), you do need
the SVN repo. At this point, I'll let the others chime in.

Best,
Alex

On Fri, Nov 7, 2014 at 11:59 AM, Sweta Rani <swetarani3007@gmail.com> wrote:

> Alex,
> I am referring to http://mesos.apache.org/assets/css/main.css.
> On Fri Nov 07 2014 at 4:11:10 PM Sweta Rani <swetarani3007@gmail.com>
> wrote:
>
> > Alex,
> > I had followed those instruction and for that I cloned git repository but
> > I don't have the asset folder in it where I need to make changes. So, how
> > shall I proceed then.
> > On Fri Nov 07 2014 at 4:07:58 PM Alex Rukletsov <alex@mesosphere.io>
> > wrote:
> >
> >> You're welcome! If you would like to contribute to Mesos (what is highly
> >> encouraged!) please check this guide
> >> <https://mesos.apache.org/documentation/latest/mesos-developers-guide/
> >.
> >> AFAIK, you don't need to clone any svn repos for this : ).
> >>
> >> On Fri, Nov 7, 2014 at 11:29 AM, Sweta Rani <swetarani3007@gmail.com>
> >> wrote:
> >>
> >> > But next I was trying to clone svn repo as I need to make changes in
> >> > main.css so I would need help in that
> >> >
> >> >
> >> > On Fri Nov 07 2014 at 3:57:52 PM Sweta Rani <swetarani3007@gmail.com>
> >> > wrote:
> >> >
> >> > > Yes I have done that. Now master and slave both are working. Thanks
> >> for
> >> > > help :)
> >> > >
> >> > >
> >> > > On Fri Nov 07 2014 at 3:55:29 PM Alex Rukletsov <alex@mesosphere.io
> >
> >> > > wrote:
> >> > >
> >> > >> Hi Sweta,
> >> > >>
> >> > >> I'm a bit confused about what works for you and what doesn't. Are
> you
> >> > now
> >> > >> able to start mesos-master and mesos-slave and launch an example
> >> > >> framework?
> >> > >>
> >> > >> On Thu, Nov 6, 2014 at 9:16 PM, Sweta Rani <
> swetarani3007@gmail.com>
> >> > >> wrote:
> >> > >>
> >> > >> > Cloning from svn repo gave following error:
> >> > >> >
> >> > >> > proxima@proxima-HP-Pavilion-m6-Notebook-PC:~/mesodoc$ rake
> >> > >> > Cloning Apache Mesos codebase
> >> > >> > Cloning into '/home/proxima/mesodoc/tmp/mesos'...
> >> > >> > remote: Counting objects: 1075, done.
> >> > >> > remote: Compressing objects: 100% (935/935), done.
> >> > >> > remote: Total 1075 (delta 221), reused 537 (delta 83)
> >> > >> > Receiving objects: 100% (1075/1075), 26.77 MiB | 171.00 KiB/s,
> >> done.
> >> > >> > Resolving deltas: 100% (221/221), done.
> >> > >> > Checking connectivity... done.
> >> > >> > Updating latest documentation from the Apache Mesos codebase
> >> > >> > Updating docs to the latest version
> >> > >> > rake aborted!
> >> > >> > Errno::ENOENT: No such file or directory -
> >> > >> > /home/proxima/mesodoc/source/documentation/latest/
> >> > >> > running-torque-or-mpi-on-mesos.md
> >> > >> > /home/proxima/mesodoc/Rakefile:43:in `block in <top (required)>'
> >> > >> > Tasks: TOP => default => update_docs
> >> > >> >
> >> > >> > Neither I could get assets folder in this. How will I make
> changes?
> >> > >> >
> >> > >> > On Thu Nov 06 2014 at 10:55:38 PM Joris Van Remoortere <
> >> > >> > joris@mesosphere.io>
> >> > >> > wrote:
> >> > >> >
> >> > >> > > If you run: mesos-slave.sh --help
> >> > >> > > Then you will see all the options you can pass to the slave.
> One
> >> of
> >> > >> them
> >> > >> > > is --port=VALUE
> >> > >> > >
> >> > >> > > Joris
> >> > >> > >
> >> > >> > > On Thu, Nov 6, 2014 at 6:39 AM, Sweta Rani <
> >> swetarani3007@gmail.com
> >> > >
> >> > >> > > wrote:
> >> > >> > >
> >> > >> > > > How can I change port for mesos-slave from default 5051 to
> >> 5052?
> >> > >> > > >
> >> > >> > > > *Sweta Rani*
> >> > >> > > >
> >> > >> > > > On Thu, Nov 6, 2014 at 7:58 PM, Sweta Rani <
> >> > swetarani3007@gmail.com
> >> > >> >
> >> > >> > > > wrote:
> >> > >> > > >
> >> > >> > > > > Alex,
> >> > >> > > > >
> >> > >> > > > > Done with master but unable to run slave using command
> >> > >> > > > "./bin/mesos-slave.sh
> >> > >> > > > > --master=127.0.0.1:5050"
> >> > >> > > > > Also the port 5051 is allocated with random work '-'. See
> >> this:
> >> > >> > > > > proxima@proxima:~/mesos/build$ netstat -ltnp | grep
> ':5051'
> >> > >> > > > > (Not all processes could be identified, non-owned process
> >> info
> >> > >> > > > >  will not be shown, you would have to be root to see it
> all.)
> >> > >> > > > > tcp        0      0 0.0.0.0:5051            0.0.0.0:*
> >> > >> > > > > LISTEN      -
> >> > >> > > > > proxima@proxima:~/mesos/build$ sudo kill -9 -
> >> > >> > > > > kill: failed to parse argument: '-'
> >> > >> > > > > proxima@proxima:~/mesos/build$ netstat -ltnp | grep
> ':5051'
> >> > >> > > > > (Not all processes could be identified, non-owned process
> >> info
> >> > >> > > > >  will not be shown, you would have to be root to see it
> all.)
> >> > >> > > > > tcp        0      0 0.0.0.0:5051            0.0.0.0:*
> >> > >> > > > > LISTEN      -
> >> > >> > > > > proxima@:~/mesos/build$ ./bin/mesos-slave.sh --master=
> >> > >> 127.0.0.1:5050
> >> > >> > > > > WARNING: Logging before InitGoogleLogging() is written to
> >> STDERR
> >> > >> > > > > F1106 19:51:22.737992 6367 process.cpp:1532] Failed to
> >> > initialize,
> >> > >> > bind
> >> > >> > > > > 0.0.0.0:5051: Address already in use [98]
> >> > >> > > > > *** Check failure stack trace: ***
> >> > >> > > > > Aborted (core dumped)
> >> > >> > > > >
> >> > >> > > > >
> >> > >> > > > > *Sweta Rani*
> >> > >> > > > >
> >> > >> > > > > On Thu, Nov 6, 2014 at 7:07 PM, Alex Rukletsov <
> >> > >> alex@mesosphere.io>
> >> > >> > > > wrote:
> >> > >> > > > >
> >> > >> > > > >> Sweta,
> >> > >> > > > >>
> >> > >> > > > >> have you tried another port?
> >> > >> > > > >>
> >> > >> > > > >> On Thu, Nov 6, 2014 at 2:24 PM, Sweta Rani <
> >> > >> swetarani3007@gmail.com
> >> > >> > >
> >> > >> > > > >> wrote:
> >> > >> > > > >>
> >> > >> > > > >> > Joris
> >> > >> > > > >> >
> >> > >> > > > >> > Done with above commands, but now it gives following
> >> error:
> >> > >> > > > >> > WARNING: Logging before InitGoogleLogging() is written
> to
> >> > >> STDERR
> >> > >> > > > >> > F1106 18:50:48.117947  9706 process.cpp:1532] Failed to
> >> > >> > initialize,
> >> > >> > > > bind
> >> > >> > > > >> > 127.0.0.1:5050: Address already in use [98]
> >> > >> > > > >> > *** Check failure stack trace: ***
> >> > >> > > > >> >
> >> > >> > > > >> > I tried to solve it by
> >> > >> > > > >> >
> >> > >> > > > >> >
> >> > >> > > > >>
> >> > >> > > > http://stackoverflow.com/questions/10745878/ubuntu-
> >> > >> > > error-with-apache-98address-already-in-use
> >> > >> > > > >> >  but it didnt work for me.
> >> > >> > > > >> >
> >> > >> > > > >> >
> >> > >> > > > >> > *Sweta Rani*
> >> > >> > > > >> >
> >> > >> > > > >> > On Wed, Nov 5, 2014 at 3:50 AM, Joris Van Remoortere <
> >> > >> > > > >> joris@mesosphere.io>
> >> > >> > > > >> > wrote:
> >> > >> > > > >> >
> >> > >> > > > >> > > You need to make the directory and set the permissions
> >> to
> >> > the
> >> > >> > user
> >> > >> > > > you
> >> > >> > > > >> > are
> >> > >> > > > >> > > running the master as.
> >> > >> > > > >> > >
> >> > >> > > > >> > > For example:
> >> > >> > > > >> > >
> >> > >> > > > >> > > sudo mkdir /var/lib/mesos
> >> > >> > > > >> > > sudo chown jmlvanre /var/lib/mesos
> >> > >> > > > >> > >
> >> > >> > > > >> > > [jmlvanre] <run mesos master...>
> >> > >> > > > >> > >
> >> > >> > > > >> > > On Tue, Nov 4, 2014 at 2:07 PM, Sweta Rani <
> >> > >> > > swetarani3007@gmail.com
> >> > >> > > > >
> >> > >> > > > >> > > wrote:
> >> > >> > > > >> > >
> >> > >> > > > >> > > > Thanks for your help. I have installed mesos but
> >> unable
> >> > to
> >> > >> > > start
> >> > >> > > > >> mesos
> >> > >> > > > >> > > > master by the command
> >> > >> > > > >> > > > "./bin/mesos-master.sh --ip=127.0.0.1
> >> > >> > > --work_dir=/var/lib/mesos".
> >> > >> > > > >> > > >
> >> > >> > > > >> > > > The file exists as "mesos-master.sh.in" in the bin
> >> > folder.
> >> > >> > > > >> > > >
> >> > >> > > > >> > > > It reports:
> >> > >> > > > >> > > > Failed to create work directory '/var/lib/mesos':
> >> > >> Permission
> >> > >> > > > denied
> >> > >> > > > >> > > >
> >> > >> > > > >> > > > *Sweta Rani*
> >> > >> > > > >> > > >
> >> > >> > > > >> > > > On Tue, Nov 4, 2014 at 2:50 PM, Adam Bordelon <
> >> > >> > > adam@mesosphere.io
> >> > >> > > > >
> >> > >> > > > >> > > wrote:
> >> > >> > > > >> > > >
> >> > >> > > > >> > > > > As an alternate workaround, if you don't need the
> >> Java
> >> > >> > support
> >> > >> > > > >> > (you're
> >> > >> > > > >> > > > not
> >> > >> > > > >> > > > > running a JVM framework like
> Spark/Hadoop/Marathon),
> >> > then
> >> > >> > you
> >> > >> > > > >> could
> >> > >> > > > >> > use
> >> > >> > > > >> > > > > `configure --disable-java` to skip all the
> maven/pom
> >> > >> build
> >> > >> > > > steps.
> >> > >> > > > >> > > > >
> >> > >> > > > >> > > > > By disabling Java, you could at least check that
> the
> >> > >> rest of
> >> > >> > > > Mesos
> >> > >> > > > >> > > builds
> >> > >> > > > >> > > > > and runs fine, which would still work with C++,
> >> Python,
> >> > >> or
> >> > >> > Go
> >> > >> > > > >> > > frameworks,
> >> > >> > > > >> > > > > or even any Java frameworks using the pure Java
> >> > bindings
> >> > >> > > > (jesos).
> >> > >> > > > >> > > > >
> >> > >> > > > >> > > > > On Mon, Nov 3, 2014 at 2:01 PM, Joris Van
> >> Remoortere <
> >> > >> > > > >> > > > joris@mesosphere.io>
> >> > >> > > > >> > > > > wrote:
> >> > >> > > > >> > > > >
> >> > >> > > > >> > > > > > Did you verify that the settings.xml file was
> >> parsed
> >> > >> using
> >> > >> > > mvn
> >> > >> > > > >> -X?
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > > > > > Specifically after the first few lines you will
> >> see
> >> > >> > > something
> >> > >> > > > >> along
> >> > >> > > > >> > > the
> >> > >> > > > >> > > > > > lines of:
> >> > >> > > > >> > > > > > [DEBUG] Reading global settings from
> >> > >> > > > >> > > /usr/share/maven/conf/settings.xml
> >> > >> > > > >> > > > > > [DEBUG] Reading user settings from
> >> > >> > > /home/abc/.m2/settings.xml
> >> > >> > > > >> > > > > > [DEBUG] Using local repository at
> >> > >> /home/abc/.m2/repository
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > > > > > Make sure your settings file is in the right
> >> > location.
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > > > > > On Mon, Nov 3, 2014 at 11:51 AM, Sweta Rani <
> >> > >> > > > >> > swetarani3007@gmail.com
> >> > >> > > > >> > > >
> >> > >> > > > >> > > > > > wrote:
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > > > > > > I use campus proxy configuration for internet.
> >> But
> >> > I
> >> > >> am
> >> > >> > > > >> unable to
> >> > >> > > > >> > > run
> >> > >> > > > >> > > > > > make
> >> > >> > > > >> > > > > > > in installing Mesos on my Ubuntu -14.04, as it
> >> ends
> >> > >> up
> >> > >> > > with
> >> > >> > > > >> > > ERROR(1).
> >> > >> > > > >> > > > > > Upon
> >> > >> > > > >> > > > > > > searching, I created settings.xml file inside
> >> .m2
> >> > >> with
> >> > >> > the
> >> > >> > > > >> > required
> >> > >> > > > >> > > > > > > configuration but failed again. Please help me
> >> out,
> >> > >> as
> >> > >> > it
> >> > >> > > is
> >> > >> > > > >> > > greatly
> >> > >> > > > >> > > > > > > hindering me from my work.
> >> > >> > > > >> > > > > > >
> >> > >> > > > >> > > > > > > On Sat Nov 01 2014 at 3:38:57 AM Joris Van
> >> > >> Remoortere <
> >> > >> > > > >> > > > > > joris@mesosphere.io
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > wrote:
> >> > >> > > > >> > > > > > >
> >> > >> > > > >> > > > > > > > I think this suggests you're fetching
> through
> >> a
> >> > >> proxy:
> >> > >> > > > >> > > > > > > > *Proxy request sent, awaiting response...
> 200
> >> OK*
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > > When I wget this is my output:
> >> > >> > > > >> > > > > > > >  wget
> >> > >> > > > >> >
> http://repo.maven.apache.org/maven2/org/apache/apache/11/
> >> > >> > > > >> > > > > > > > apache-11.pom
> >> > >> > > > >> > > > > > > > --2014-10-31
> >> > >> > > > >> > > > > > > > <
> >> > >> > > > >> > > > > > >
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > > > >
> >> > >> > > > >> > > >
> >> > >> > > > >> > >
> >> > >> > > > >> >
> >> > >> > > > >>
> >> > >> > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/
> >> > >> > > apache-11.pom--2014-10-31
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > > 15:05:32--
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > >
> >> > >> > > > >> >
> >> > >> > > > http://repo.maven.apache.org/maven2/org/apache/apache/11/apa
> >> > >> che-11.pom
> >> > >> > > > >> > > > > > > > Resolving repo.maven.apache.org (
> >> > >> > repo.maven.apache.org
> >> > >> > > > )...
> >> > >> > > > >> > > > > > 23.235.47.215
> >> > >> > > > >> > > > > > > > Connecting to repo.maven.apache.org
> >> > >> > > > >> > > > > > > > (repo.maven.apache.org
> )|23.235.47.215|:80...
> >> > >> > > > >> > > > > > > > connected.
> >> > >> > > > >> > > > > > > > *HTTP request sent, awaiting response... 200
> >> OK*
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > > I think you might need to set up your proxy
> >> along
> >> > >> > these
> >> > >> > > > >> lines:
> >> > >> > > > >> > > > > > > >
> >> > >> > http://maven.apache.org/guides/mini/guide-proxies.html
> >> > >> > > > ...
> >> > >> > > > >> > but I
> >> > >> > > > >> > > > am
> >> > >> > > > >> > > > > > not
> >> > >> > > > >> > > > > > > > familiar with Maven.
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > > Joris
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > > On Fri, Oct 31, 2014 at 2:36 PM, Sweta Rani
> <
> >> > >> > > > >> > > > swetarani3007@gmail.com
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > > > > > > > wrote:
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > > > Tried wget for all the given https, it was
> >> > >> > successful
> >> > >> > > > but
> >> > >> > > > >> > still
> >> > >> > > > >> > > > > after
> >> > >> > > > >> > > > > > > > that
> >> > >> > > > >> > > > > > > > > make was not successful and make check
> says
> >> > "YOU
> >> > >> > HAVE
> >> > >> > > 3
> >> > >> > > > >> > > DISABLED
> >> > >> > > > >> > > > > > TESTS"
> >> > >> > > > >> > > > > > > > >
> >> > >> > > > >> > > > > > > > > proxima@Centauri:~/mesos/build$ wget
> >> > >> > > > >> > > > > > > > >
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > >
> >> > >> > > > >> http://repo.maven.apache.org/maven2/org/apache/apache/11/
> >> > >> > > apache-11.pom
> >> > >> > > > >> > > > > > > > > --2014-11-01 02:55:51--
> >> > >> > > > >> > > > > > > > >
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > >
> >> > >> > > > >> http://repo.maven.apache.org/maven2/org/apache/apache/11/
> >> > >> > > apache-11.pom
> >> > >> > > > >> > > > > > > > > Connecting to 10.3.100.207:8080...
> >> connected.
> >> > >> > > > >> > > > > > > > > Proxy request sent, awaiting response...
> >> 200 OK
> >> > >> > > > >> > > > > > > > > Length: 14811 (14K) [text/xml]
> >> > >> > > > >> > > > > > > > > Saving to: ‘apache-11.pom’
> >> > >> > > > >> > > > > > > > >
> >> > >> > > > >> > > > > > > > > >> *Joris Van Remoortere*
> >> > >> > > > >> > > > > > > > >
> >> > >> > > > >> > > > > > > > > On Sat Nov 01 2014 at 2:36:27 AM Joris Van
> >> > >> > Remoortere
> >> > >> > > <
> >> > >> > > > >> > > > > > > > joris@mesosphere.io
> >> > >> > > > >> > > > > > > > > >
> >> > >> > > > >> > > > > > > > > wrote:
> >> > >> > > > >> > > > > > > > >
> >> > >> > > > >> > > > > > > > > > That seems like you might have a
> >> > connectivity /
> >> > >> > > > firewall
> >> > >> > > > >> > > issue.
> >> > >> > > > >> > > > > > > > > > Can you try just doing a wget on that
> >> > artifact?
> >> > >> > > > >> > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > On Fri, Oct 31, 2014 at 1:56 PM, Sweta
> >> Rani <
> >> > >> > > > >> > > > > > swetarani3007@gmail.com
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > > > > > wrote:
> >> > >> > > > >> > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > I tried it again but failed with
> >> following
> >> > >> > errors
> >> > >> > > :
> >> > >> > > > >> > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > make[1]: Entering directory
> >> > >> > > > >> > `/home/proxima/mesos/build/src'
> >> > >> > > > >> > > > > > > > > > > Building mesos-0.21.0.jar ...
> >> > >> > > > >> > > > > > > > > > > [INFO] Scanning for projects...
> >> > >> > > > >> > > > > > > > > > > Downloading:
> >> > >> > > > >> > > > > > > > > > >
> >> > >> > > > >> >
> http://repo.maven.apache.org/maven2/org/apache/apache/11/
> >> > >> > > > >> > > > > > > > apache-11.pom
> >> > >> > > > >> > > > > > > > > > > [ERROR] The build could not read 1
> >> project
> >> > ->
> >> > >> > > [Help
> >> > >> > > > 1]
> >> > >> > > > >> > > > > > > > > > > [ERROR]
> >> > >> > > > >> > > > > > > > > > > [ERROR]   The project
> >> > >> > > org.apache.mesos:mesos:0.21.0
> >> > >> > > > >> > > > > > > > > > > (/home/proxima/mesos/build/src
> >> > >> /java/mesos.pom)
> >> > >> > > has 1
> >> > >> > > > >> > error
> >> > >> > > > >> > > > > > > > > > > [ERROR]     Non-resolvable parent POM:
> >> > Could
> >> > >> not
> >> > >> > > > >> transfer
> >> > >> > > > >> > > > > > artifact
> >> > >> > > > >> > > > > > > > > > > org.apache:apache:pom:11 from/to
> >> central (
> >> > >> > > > >> > > > > > > > > > > http://repo.maven.apache.org/maven2):
> >> > >> > Connection
> >> > >> > > to
> >> > >> > > > >> > > > > > > > > > > http://repo.maven.apache.org refused
> >> and
> >> > >> > > > >> > > > 'parent.relativePath'
> >> > >> > > > >> > > > > > > > points
> >> > >> > > > >> > > > > > > > > at
> >> > >> > > > >> > > > > > > > > > > wrong local POM @ line 18, column 11:
> >> > >> Connection
> >> > >> > > > >> refused
> >> > >> > > > >> > ->
> >> > >> > > > >> > > > > [Help
> >> > >> > > > >> > > > > > > 2]
> >> > >> > > > >> > > > > > > > > > > [ERROR]
> >> > >> > > > >> > > > > > > > > > > [ERROR] To see the full stack trace of
> >> the
> >> > >> > errors,
> >> > >> > > > >> re-run
> >> > >> > > > >> > > > Maven
> >> > >> > > > >> > > > > > > with
> >> > >> > > > >> > > > > > > > > the
> >> > >> > > > >> > > > > > > > > > -e
> >> > >> > > > >> > > > > > > > > > > switch.
> >> > >> > > > >> > > > > > > > > > > [ERROR] Re-run Maven using the -X
> >> switch to
> >> > >> > enable
> >> > >> > > > >> full
> >> > >> > > > >> > > debug
> >> > >> > > > >> > > > > > > > logging.
> >> > >> > > > >> > > > > > > > > > > [ERROR]
> >> > >> > > > >> > > > > > > > > > > [ERROR] For more information about the
> >> > errors
> >> > >> > and
> >> > >> > > > >> > possible
> >> > >> > > > >> > > > > > > solutions,
> >> > >> > > > >> > > > > > > > > > > please read the following articles:
> >> > >> > > > >> > > > > > > > > > > [ERROR] [Help 1]
> >> > >> > > > >> > > > > > > > > > >
> >> > >> > > > >> > >
> >> > http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuil
> >> > >> > > > >> > > > > > > > > > dingException
> >> > >> > > > >> > > > > > > > > > > [ERROR] [Help 2]
> >> > >> > > > >> > > > > > > > > > >
> >> > >> > > > >> > >
> >> > http://cwiki.apache.org/confluence/display/MAVEN/Unresolvabl
> >> > >> > > > >> > > > > > > > > > eModelException
> >> > >> > > > >> > > > > > > > > > > make[1]: ***
> >> [java/target/mesos-0.21.0.jar]
> >> > >> > Error
> >> > >> > > 1
> >> > >> > > > >> > > > > > > > > > > make[1]: Leaving directory
> >> > >> > > > >> > `/home/proxima/mesos/build/src'
> >> > >> > > > >> > > > > > > > > > > make: *** [all-recursive] Error 1
> >> > >> > > > >> > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > On Fri Oct 31 2014 at 1:09:15 PM Sweta
> >> > Rani <
> >> > >> > > > >> > > > > > > swetarani3007@gmail.com
> >> > >> > > > >> > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > wrote:
> >> > >> > > > >> > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > > yaa..  followed the steps as
> directed
> >> in
> >> > >> the
> >> > >> > > > >> > > documentation
> >> > >> > > > >> > > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > > *Sweta Rani*
> >> > >> > > > >> > > > > > > > > > > > *3rd Year Undergraduate*
> >> > >> > > > >> > > > > > > > > > > > *Department of Electrical
> Engineering*
> >> > >> > > > >> > > > > > > > > > > > *IIT Kharagpur <
> >> http://www.iitkgp.ac.in/
> >> > >*
> >> > >> > > > >> > > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > > On Fri, Oct 31, 2014 at 3:14 AM,
> >> Dominic
> >> > >> > Hamon <
> >> > >> > > > >> > > > > > > > > > dhamon@twopensource.com>
> >> > >> > > > >> > > > > > > > > > > > wrote:
> >> > >> > > > >> > > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > >> Let's tackle the easy stuff: did
> you
> >> run
> >> > >> > > > bootstrap
> >> > >> > > > >> and
> >> > >> > > > >> > > > > > configure
> >> > >> > > > >> > > > > > > > as
> >> > >> > > > >> > > > > > > > > > per
> >> > >> > > > >> > > > > > > > > > > >> the
> >> > >> > > > >> > > > > > > > > > > >> getting started doc?
> >> > >> > > > >> > > > > > > > > > > >> On Oct 30, 2014 2:04 PM, "Sweta
> >> Rani" <
> >> > >> > > > >> > > > > > swetarani3007@gmail.com>
> >> > >> > > > >> > > > > > > > > > wrote:
> >> > >> > > > >> > > > > > > > > > > >>
> >> > >> > > > >> > > > > > > > > > > >> > Tried all the suggestions and
> tips
> >> > >> given in
> >> > >> > > > JIRA
> >> > >> > > > >> and
> >> > >> > > > >> > > > > > different
> >> > >> > > > >> > > > > > > > > > google
> >> > >> > > > >> > > > > > > > > > > >> > forums but still the error
> remains
> >> > same.
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > > > > > > > > >> > Making all in .
> >> > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory
> >> > >> > > > >> > > `/home/proxima/mesos/build'
> >> > >> > > > >> > > > > > > > > > > >> > make[1]: Nothing to be done for
> >> > >> `all-am'.
> >> > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory
> >> > >> > > > >> > `/home/proxima/mesos/build'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in 3rdparty
> >> > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory
> >> > >> > > > >> > > `/home/proxima/mesos/build/
> >> > >> > > > >> > > > > > > > 3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > make  all-recursive
> >> > >> > > > >> > > > > > > > > > > >> > make[2]: Entering directory
> >> > >> > > > >> > > `/home/proxima/mesos/build/
> >> > >> > > > >> > > > > > > > 3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in libprocess
> >> > >> > > > >> > > > > > > > > > > >> > make[3]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/
> >> > >> > > 3rdparty/libprocess'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in 3rdparty
> >> > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > `/home/proxima/mesos/build/3rd
> >> party/libprocess/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > make  all-recursive
> >> > >> > > > >> > > > > > > > > > > >> > make[5]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > `/home/proxima/mesos/build/3rd
> >> party/libprocess/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in stout
> >> > >> > > > >> > > > > > > > > > > >> > make[6]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd
> >> > >> party/libprocess/3rdparty/
> >> > >> > > stout'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in .
> >> > >> > > > >> > > > > > > > > > > >> > make[7]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd
> >> > >> party/libprocess/3rdparty/
> >> > >> > > stout'
> >> > >> > > > >> > > > > > > > > > > >> > make[7]: Nothing to be done for
> >> > >> `all-am'.
> >> > >> > > > >> > > > > > > > > > > >> > make[7]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd
> >> > >> party/libprocess/3rdparty/
> >> > >> > > stout'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in include
> >> > >> > > > >> > > > > > > > > > > >> > make[7]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > >
> >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/
> >> > >> stou
> >> > >> > > > >> > > > > > > > > > t/include'
> >> > >> > > > >> > > > > > > > > > > >> > make[7]: Nothing to be done for
> >> `all'.
> >> > >> > > > >> > > > > > > > > > > >> > make[7]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > >
> >> > `/home/proxima/mesos/build/3rdparty/libprocess/3rdparty/
> >> > >> stou
> >> > >> > > > >> > > > > > > > > > t/include'
> >> > >> > > > >> > > > > > > > > > > >> > make[6]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > > > `/home/proxima/mesos/build/3rd
> >> > >> party/libprocess/3rdparty/
> >> > >> > > stout'
> >> > >> > > > >> > > > > > > > > > > >> > make[6]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > `/home/proxima/mesos/build/3rd
> >> party/libprocess/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > make[6]: Nothing to be done for
> >> > >> `all-am'.
> >> > >> > > > >> > > > > > > > > > > >> > make[6]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > `/home/proxima/mesos/build/3rd
> >> party/libprocess/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > make[5]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > `/home/proxima/mesos/build/3rd
> >> party/libprocess/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > `/home/proxima/mesos/build/3rd
> >> party/libprocess/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in .
> >> > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/
> >> > >> > > 3rdparty/libprocess'
> >> > >> > > > >> > > > > > > > > > > >> > make[4]: Nothing to be done for
> >> > >> `all-am'.
> >> > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/
> >> > >> > > 3rdparty/libprocess'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in include
> >> > >> > > > >> > > > > > > > > > > >> > make[4]: Entering directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > >
> `/home/proxima/mesos/build/3rdparty/libprocess/include'
> >> > >> > > > >> > > > > > > > > > > >> > make[4]: Nothing to be done for
> >> `all'.
> >> > >> > > > >> > > > > > > > > > > >> > make[4]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > >
> `/home/proxima/mesos/build/3rdparty/libprocess/include'
> >> > >> > > > >> > > > > > > > > > > >> > make[3]: Leaving directory
> >> > >> > > > >> > > > > > > > > > > >> `/home/proxima/mesos/build/
> >> > >> > > 3rdparty/libprocess'
> >> > >> > > > >> > > > > > > > > > > >> > make[3]: Entering directory
> >> > >> > > > >> > > `/home/proxima/mesos/build/
> >> > >> > > > >> > > > > > > > 3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > make[3]: Nothing to be done for
> >> > >> `all-am'.
> >> > >> > > > >> > > > > > > > > > > >> > make[3]: Leaving directory
> >> > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > make[2]: Leaving directory
> >> > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory
> >> > >> > > > >> > > > > > > `/home/proxima/mesos/build/3rdparty'
> >> > >> > > > >> > > > > > > > > > > >> > Making all in src
> >> > >> > > > >> > > > > > > > > > > >> > make[1]: Entering directory
> >> > >> > > > >> > > > > `/home/proxima/mesos/build/src'
> >> > >> > > > >> > > > > > > > > > > >> > make[1]: *** No rule to make
> target
> >> > >> `all'.
> >> > >> > > > Stop.
> >> > >> > > > >> > > > > > > > > > > >> > make[1]: Leaving directory
> >> > >> > > > >> > > > `/home/proxima/mesos/build/src'
> >> > >> > > > >> > > > > > > > > > > >> > make: *** [all-recursive] Error 1
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > > > > > > > > >> > *Sweta Rani*
> >> > >> > > > >> > > > > > > > > > > >> >
> >> > >> > > > >> > > > > > > > > > > >>
> >> > >> > > > >> > > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > > >
> >> > >> > > > >> > > > > > > > > >
> >> > >> > > > >> > > > > > > > >
> >> > >> > > > >> > > > > > > >
> >> > >> > > > >> > > > > > >
> >> > >> > > > >> > > > > >
> >> > >> > > > >> > > > >
> >> > >> > > > >> > > >
> >> > >> > > > >> > >
> >> > >> > > > >> >
> >> > >> > > > >>
> >> > >> > > > >
> >> > >> > > > >
> >> > >> > > >
> >> > >> > >
> >> > >> >
> >> > >>
> >> > >
> >> >
> >>
> >
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message