manifoldcf-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Karl Wright <daddy...@gmail.com>
Subject Re: Question about ManifoldCF 2.8
Date Wed, 06 Sep 2017 11:18:21 GMT
No, you can use whatever supported database you like.

Karl


On Wed, Sep 6, 2017 at 6:58 AM, Beelz Ryuzaki <i93othman@gmail.com> wrote:

> As far as I know, when you use zookeeper , you obligatory need to use
> HSQLDB to go with it, right?
>
> Thanks,
> Othman
>
> On Wed, 6 Sep 2017 at 12:56, Karl Wright <daddywri@gmail.com> wrote:
>
>> Hi Othman,
>>
>> HSQLDB stores all tables in memory so you need to size it accordingly.
>> That is one reason we prefer Postgresql for production deployments.
>>
>> Thanks,
>> Karl
>>
>>
>> On Wed, Sep 6, 2017 at 6:21 AM, Beelz Ryuzaki <i93othman@gmail.com>
>> wrote:
>>
>>> Hi Karl,
>>>
>>> I resolved the elasticsearch problem however the application doesn't
>>> seem to work after I have run a job to crawl over 500k documents. I get an
>>> GC overhead limit exceeded in the hsql database. How many should I allocate
>>> for it?
>>>
>>> Best regards,
>>>
>>> Othman
>>>
>>> On Tue, 5 Sep 2017 at 12:43, Karl Wright <daddywri@gmail.com> wrote:
>>>
>>>> Hi Othman,
>>>>
>>>> Thanks for doing the evaluation of the problem.
>>>>
>>>> Generally, the ManifoldCF project does not have the expertise to
>>>> diagnose problems with external systems like Solr or Elasticsearch.  So
>>>> going to another newsgroup for those kinds of issues would be a good idea.
>>>>
>>>> Thanks!
>>>> Karl
>>>>
>>>>
>>>> On Tue, Sep 5, 2017 at 4:33 AM, Beelz Ryuzaki <i93othman@gmail.com>
>>>> wrote:
>>>>
>>>>> Hi Karl,
>>>>>
>>>>> I have analyzed the error and found out that it was mainly an
>>>>> elasticsearch problem. I saw in some forums that one of the adopted
>>>>> solution is to modify elasticsearch.yml and set the http.max_content_length
>>>>> to a greater value. However, the job got stuck in the last two indexable
>>>>> files ( two pptx files with 22Mo and 2Mo respectively). The job eventually
>>>>> ended but a stack trace showed that elasticsearch ran out of memory. For
>>>>> your information, I have allocated 4Go for elasticsearch execution. Is it
>>>>> enough in order to have a good performance. You will find attached the
>>>>> stack traces of elasticsearch.
>>>>>
>>>>> Best regards,
>>>>>
>>>>> Othman BELHAJ.
>>>>>
>>>>> On Mon, 4 Sep 2017 at 16:40, Beelz Ryuzaki <i93othman@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Karl,
>>>>>>
>>>>>> I'm sorry to bother on your holiday. I will try to analyze it today
>>>>>> and let it you know what I have found. Enjoy your day !
>>>>>>
>>>>>> Best regards,
>>>>>>
>>>>>> Othman BELHAJ.
>>>>>>
>>>>>> On Mon, 4 Sep 2017 at 16:06, Karl Wright <daddywri@gmail.com> wrote:
>>>>>>
>>>>>>> Hi Othman,
>>>>>>>
>>>>>>> I won't be able to look at this today; it is a holiday here.  But,
>>>>>>> the "socket write" error is coming from ElasticSearch.  If ES is configured
>>>>>>> to not accept documents greater than a certain size, that might explain
>>>>>>> it.  Maybe the ES logs would help?
>>>>>>>
>>>>>>> I'm afraid you're going to need to do the work to find out what is
>>>>>>> going wrong in those cases now.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Karl
>>>>>>>
>>>>>>>
>>>>>>> On Mon, Sep 4, 2017 at 4:53 AM, Beelz Ryuzaki <i93othman@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi Karl,
>>>>>>>>
>>>>>>>> This morning, I have tried the zookeeper based file and it worked
>>>>>>>> really good. However, I still have one error which is bugging me. It is a
>>>>>>>> socket write error. You will find attached the simple history report.
>>>>>>>> Surprisingly, I didn't have any stack trace in the ManifoldCF log file.
>>>>>>>>
>>>>>>>> Best regards,
>>>>>>>>
>>>>>>>> Othman.
>>>>>>>>
>>>>>>>> On Fri, 1 Sep 2017 at 19:39, Karl Wright <daddywri@gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> This is from file locking yet again.
>>>>>>>>>
>>>>>>>>> I have uploaded a new RC.  Please download and try out the
>>>>>>>>> zookeeper locking.
>>>>>>>>>
>>>>>>>>> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-
>>>>>>>>> manifoldcf-2.8.1
>>>>>>>>>
>>>>>>>>> Karl
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Fri, Sep 1, 2017 at 1:11 PM, Beelz Ryuzaki <i93othman@gmail.com
>>>>>>>>> > wrote:
>>>>>>>>>
>>>>>>>>>> There is another issue as well that gives the following stack
>>>>>>>>>> trace.
>>>>>>>>>>
>>>>>>>>>> Othman.
>>>>>>>>>>
>>>>>>>>>> On Fri, 1 Sep 2017 at 18:05, Beelz Ryuzaki <i93othman@gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>
>>>>>>>>>>> I took the binary from the ManifoldCF 2.8.1 RC0. It had the
>>>>>>>>>>> version 3.9 of POI and when I changed the version to 3.15 it worked fine. I
>>>>>>>>>>> really want to try the zookeeper if as you told me its performance is
>>>>>>>>>>> better than the file-based example. For the time being, I'm using the
>>>>>>>>>>> file-based because it is the only part that works for me but I actually
>>>>>>>>>>> need a stable version for my production environment. That is one point.
>>>>>>>>>>> Another point is, the path's tab is still an issue for me
>>>>>>>>>>> because I exclude some files and it still crawls them. I want to exclude
>>>>>>>>>>> some specific extensions of files and some specific directories. For
>>>>>>>>>>> instance, i don't want to index .exe files and contains a specific word. I
>>>>>>>>>>> do as follows I make the first exclude with *.exe and the second one with
>>>>>>>>>>> *word*. Only the second one which doesn't work. How can I solve this issue,
>>>>>>>>>>> please?
>>>>>>>>>>>
>>>>>>>>>>> Thank you very much, have a nice week-end,
>>>>>>>>>>>
>>>>>>>>>>> Othman
>>>>>>>>>>> On Fri, 1 Sep 2017 at 16:46, Karl Wright <daddywri@gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>
>>>>>>>>>>>> I will respin a new 2.8.1 (RC1) to address the zookeeper issue.
>>>>>>>>>>>>
>>>>>>>>>>>> The failure you are seeing is "NoSuchMethodError".  Therefore,
>>>>>>>>>>>> the class is being found, but it is the *wrong* class.  When you deployed
>>>>>>>>>>>> the new release, did you deploy it in a new directory, or did you overwrite
>>>>>>>>>>>> the previous deployment?  If you overwrote it, you probably have multiple
>>>>>>>>>>>> versions of the POI jars.
>>>>>>>>>>>>
>>>>>>>>>>>> Karl
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Fri, Sep 1, 2017 at 9:59 AM, Beelz Ryuzaki <
>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have just tried the new release of ManifoldCF. At first, the
>>>>>>>>>>>>> first job ended normally, but in the second I got a new stack trace
>>>>>>>>>>>>> concerning the POI. Moreover, the runzookeeper.bat doesn't run properly. It
>>>>>>>>>>>>> shows me the stack trace attached.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Ps:
>>>>>>>>>>>>> The second attached file contains the POI stack trace.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, 1 Sep 2017 at 12:21, Karl Wright <daddywri@gmail.com>
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You do not need a new database instance.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You can download MCF 2.8.1 RC0 from here:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-
>>>>>>>>>>>>>> manifoldcf-2.8.1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Fri, Sep 1, 2017 at 5:42 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thank you very much for your help, I'm going to try out the
>>>>>>>>>>>>>>> zookeeper example. Should I initialize a new database? And how can I run
>>>>>>>>>>>>>>> the zookeeper start-agent ?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Fri, 1 Sep 2017 at 11:37, Karl Wright <daddywri@gmail.com>
>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> These exceptions are now coming from file locking and are
>>>>>>>>>>>>>>>> due to permissions problems.  I suggest you go to Zookeeper for file
>>>>>>>>>>>>>>>> locking.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I am building a 2.8.1 release candidate.  When it available
>>>>>>>>>>>>>>>> for download, I'll send you the URL.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Fri, Sep 1, 2017 at 5:27 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> This morning, I have followed the steps you told me to do
>>>>>>>>>>>>>>>>> and I still got stack traces. I have attached the stack traces as well as
>>>>>>>>>>>>>>>>> the content of my lib repo and option.env.
>>>>>>>>>>>>>>>>> I have installed zookeeper and I'm ready to use the
>>>>>>>>>>>>>>>>> zookeeper example. Could you guide through it? I don't know if I follow the
>>>>>>>>>>>>>>>>> same steps in the file based example, I may not get stack traces.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 18:19, Karl Wright <
>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Please do the following:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> (0) Shut down all ManifoldCF processes.
>>>>>>>>>>>>>>>>>> (1) Move poi*.jar from connector-common-lib to lib.
>>>>>>>>>>>>>>>>>> (2) Move dom4j*.jar from connector-common-lib to lib.
>>>>>>>>>>>>>>>>>> (3) Move commons-collections4*.jar from
>>>>>>>>>>>>>>>>>> connector-common-lib to lib.
>>>>>>>>>>>>>>>>>> (4) Move xmlbeans*.java from connector-common-lib to lib.
>>>>>>>>>>>>>>>>>> (5) Move curvesapi*.jar from connector-common-lib to lib.
>>>>>>>>>>>>>>>>>> (6) Modify your options.env to include all of the jars
>>>>>>>>>>>>>>>>>> you moved.
>>>>>>>>>>>>>>>>>> (7) Start up all ManifoldCF processes.
>>>>>>>>>>>>>>>>>> (8) If you still get stack traces, please send them to me.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 12:12 PM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> By 'other place', do you mean the \lib repository? If
>>>>>>>>>>>>>>>>>>> that so, then I have already tried it and it didn't work.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 18:07, Karl Wright <
>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I used the java dependency inspector to see what the
>>>>>>>>>>>>>>>>>>>> issue is and it turns out that poi-ooxml.jar does refer back to poi.jar in
>>>>>>>>>>>>>>>>>>>> the class that is failing.  So you will need to move poi-3.15.jar and
>>>>>>>>>>>>>>>>>>>> commons-collections4-1.4.jar to the other place as well.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Let's hope that finally fixes this issue.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I'm very unhappy about the quality of the POI project
>>>>>>>>>>>>>>>>>>>> code; it is definitely not using reasonable engineering practices, and I
>>>>>>>>>>>>>>>>>>>> will be opening a ticket with them.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 11:57 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I'm using the file based example and all the changes
>>>>>>>>>>>>>>>>>>>>> you told me to do. I reproduced them in the file based example. I'll try to
>>>>>>>>>>>>>>>>>>>>> install zookeeper and use the zookeeper example. Will I need a
>>>>>>>>>>>>>>>>>>>>> configuration to do in order to run the zookeeper example ?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:46, Karl Wright <
>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Are you using the zookeeper example, or the
>>>>>>>>>>>>>>>>>>>>>> file-based example?
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> If these jars have all been moved, and the
>>>>>>>>>>>>>>>>>>>>>> options.env includes them, then I have to conclude that Apache POI's
>>>>>>>>>>>>>>>>>>>>>> pom.xml is incorrect too.  It will take a while to figure out what's
>>>>>>>>>>>>>>>>>>>>>> missing that poi-ooxml.jar needs that is not listed.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 11:39 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> All the dependencies you mentioned have already been
>>>>>>>>>>>>>>>>>>>>>>> added in the options.env.win file in the multiprocess-file-example
>>>>>>>>>>>>>>>>>>>>>>> repository.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:33, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Yes, I added it in the options.env.win file. Should
>>>>>>>>>>>>>>>>>>>>>>>> it be the one in the multiprocess-zk-example document or
>>>>>>>>>>>>>>>>>>>>>>>> multiprocess-file-example ?
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:30, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> It's not related at all to elasticsearch.
>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 11:26 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Could it be a problem of elasticsearch's version
>>>>>>>>>>>>>>>>>>>>>>>>>> ? I'm actually using 2.1.0 which is pretty old for this new version of
>>>>>>>>>>>>>>>>>>>>>>>>>> ManifoldCF?
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:23, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> I moved back both the jars you mentioned and a
>>>>>>>>>>>>>>>>>>>>>>>>>>> different is showing. You will find the stack trace attached.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:09, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> I've looked at the dependencies; you should not
>>>>>>>>>>>>>>>>>>>>>>>>>>>> have moved poi-3.15.jar.  Please move that back, and
>>>>>>>>>>>>>>>>>>>>>>>>>>>> commons-collections4-4.1.jar too.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> You *will* need to move curvesapi-1.04.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>> though.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 11:04 AM, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you include poi.jar, then all dependencies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of poi.jar must also be included.  This would mean that curvesapi-1.04.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and commons-collections4-4.1.jar should also be included.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 10:23 AM, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I added the two jars that you have mentioned
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and another one : poi-3.15.jar . Unfortunately, there is another error
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> showing. This time, it concerns excel files. You will find attached the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> stack trace.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 15:32, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, this shows that the jar we moved calls
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> back into another jar, which will also need to be moved.  *That* jar has
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> yet another dependency too.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The list of jars is thus extended to include:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> poi-ooxml-3.15.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dom4j-1.6.1.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 9:25 AM, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You will find attached the stack trace. My
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> apologies for the bad quality of the image, I'm doing my best to send you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the stack trace as I don't have the right to send documents outside the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> company.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your time,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 15:16, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Once again, I need a stack trace to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> diagnose what the problem is.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 9:14 AM, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Oh, actually it didn't solve the problem.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I looked into the log file and saw the following error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Error tossed : org/apache/poi/
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> POIXMLTypeLoader
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> java.lang.NoClassDefFoundError:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> org/apache/poi/POIXMLTypeLoader.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Maybe another jar is missing ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 15:01, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have tried what you told me to do, and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you expected the crawling resumed. How about the regular expressions? How
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can I make complex regular expressions in the job's paths tab ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you very much for your help.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 14:47, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ok, I will try it right away and let
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you know if it works.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 14:15, Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wright <daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Oh, and you also may need to edit your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> options.env files to include them in the classpath for startup.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 7:53 AM, Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wright <daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are amenable, there is another
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> workaround you could try.  Specifically:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (1) Shut down all MCF processes.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (2) Move the following two files from
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> connector-common-lib to lib:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> xmlbeans-2.6.0.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> poi-ooxml-schemas-3.15.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (3) Restart everything and see if
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your crawl resumes.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please let me know what happens.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 7:33 AM, Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wright <daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I created a ticket for this:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CONNECTORS-1450.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> One simple workaround is to use the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> external Tika server transformer rather than the embedded Tika Extractor.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm still looking into why the jar is not being found.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 7:08 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Beelz Ryuzaki <i93othman@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, I'm actually using the latest
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> binary version, and my job got stuck on that specific file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The job status is still Running.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can see it in the attached file. For your information, the job started
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> yesterday.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 13:04, Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wright <daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> It looks like a dependency of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache POI is missing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I think we will need a ticket to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> address this, if you are indeed using the binary distribution.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 6:57 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Beelz Ryuzaki <i93othman@gmail.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm actually using the binary
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version. For security reasons, I can't send any files from my computer. I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have copied the stack trace and scanned it with my cellphone. I hope it
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will be helpful. Meanwhile, I have read the documentation about how to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restrict the crawling and I don't think the '|' works in the specified. For
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instance, I would like to restrict the crawling for the documents that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> counts the 'sound' word . I proceed as follows: *(SON)* . the document is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with capital letters and I noticed that it didn't take it into
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> consideration.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 12:40,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl Wright <daddywri@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The way you restrict documents
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with the windows share connector is by specifying information on the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Paths" tab in jobs that crawl windows shares.  There is end-user
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documentation both online and distributed with all binary distributions
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that describe how to do this.  Have you found it?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 5:25 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Karl,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your response, I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will start using zookeeper and I will let you know if it works. I have
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> another question to ask. Actually, I need to make some filters while
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> crawling. I don't want to crawl some files and some folders. Could you give
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> me an example of how to use the regex. Does the regex allow to use /i to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ignore cases ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, 30 Aug 2017 at 19:53,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl Wright <daddywri@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Beelz,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> File-based sync is deprecated
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because people often have problems with getting file permissions right, and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> they do not understand how to shut processes down cleanly, and zookeeper is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> resilient against that.  I highly recommend using zookeeper sync.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ManifoldCF is engineered to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not put files into memory so you do not need huge amounts of memory.  The
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> default values are more than enough for 35,000 files, which is a pretty
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> small job for ManifoldCF.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 30, 2017 at 11:58
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm actually not using
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> zookeeper. i want to know how is zookeeper different from file based sync?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I also need a guidance on how to manage my pc's memory. How many Go should
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I allocate for the start-agent of ManifoldCF? Is 4Go enough in order to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> crawler 35K files ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, 30 Aug 2017 at 16:11,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Your disk is not writable
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for some reason, and that's interfering with ManifoldCF 2.8 locking.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I would suggest two things:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (1) Use Zookeeper for sync
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instead of file-based sync.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (2) Have a look if you still
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> get failures after that.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 30, 2017 at 9:37
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Mr Karl,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you Mr Karl for your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> quick response. I have looked into the ManifoldCF log file and extracted
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the following warnings :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Attempt to set file lock
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'D:\xxxx\apache_manifoldcf-2.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 8\multiprocess-file-example\.\.\synch
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> area\569\352\lock-_POOLTARGET_OUTPUTCONNECTORPOOL_ES
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (Lowercase) Synapses.lock' failed : Access is denied.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Couldn't write to lock
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file; disk may be full. Shutting down process; locks may be left dangling.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You must cleanup before restarting.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ES (lowercase) synapses
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> being the elasticsearch output connection. Moreover, the job uses Tika to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extract metadata and a file system as a repository connection. During the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> job, I don't extract the content of the documents. I was wandering if the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> issue comes from elasticsearch ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, 30 Aug 2017 at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 14:08, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ManifoldCF aborts a job if
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there's an error that looks like it might go away on retry, but does not.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> It can be either on the repository side or on the output side.  If you look
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> at the Simple History in the UI, or at the manifoldcf.log file, you should
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be able to get a better sense of what went wrong.  Without further
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> information, I can't say any more.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 30, 2017 at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5:33 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm Othman Belhaj, a
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> software engineer from société générale in France. I'm actually using your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> recent version of manifoldCF 2.8 . I'm working on an internal search
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine. For this reason, I'm using manifoldcf in order to index documents
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> on windows shares. I encountered a serious problem while crawling 35K
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documents. Most of the time, when manifoldcf start crawling a big sized
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documents (19Mo for example), it ends the job with the following error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> repeated service interruptions - failure processing document : software
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> caused connection abort: socket write error.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you give me some tips
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> on how to solve this problem, please ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I use PostgreSQL 9.3.x
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and elasticsearch 2.1.0 .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm looking forward for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your response.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman BELHAJ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>
>>

Mime
View raw message