manifoldcf-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Beelz Ryuzaki <i93oth...@gmail.com>
Subject Re: Question about ManifoldCF 2.8
Date Wed, 06 Sep 2017 13:35:00 GMT
Thank you, Karl. I will try to combine Postgresql with zookeeper and let
you know.

Othman.

On Wed, 6 Sep 2017 at 13:18, Karl Wright <daddywri@gmail.com> wrote:

> No, you can use whatever supported database you like.
>
> Karl
>
>
> On Wed, Sep 6, 2017 at 6:58 AM, Beelz Ryuzaki <i93othman@gmail.com> wrote:
>
>> As far as I know, when you use zookeeper , you obligatory need to use
>> HSQLDB to go with it, right?
>>
>> Thanks,
>> Othman
>>
>> On Wed, 6 Sep 2017 at 12:56, Karl Wright <daddywri@gmail.com> wrote:
>>
>>> Hi Othman,
>>>
>>> HSQLDB stores all tables in memory so you need to size it accordingly.
>>> That is one reason we prefer Postgresql for production deployments.
>>>
>>> Thanks,
>>> Karl
>>>
>>>
>>> On Wed, Sep 6, 2017 at 6:21 AM, Beelz Ryuzaki <i93othman@gmail.com>
>>> wrote:
>>>
>>>> Hi Karl,
>>>>
>>>> I resolved the elasticsearch problem however the application doesn't
>>>> seem to work after I have run a job to crawl over 500k documents. I get an
>>>> GC overhead limit exceeded in the hsql database. How many should I allocate
>>>> for it?
>>>>
>>>> Best regards,
>>>>
>>>> Othman
>>>>
>>>> On Tue, 5 Sep 2017 at 12:43, Karl Wright <daddywri@gmail.com> wrote:
>>>>
>>>>> Hi Othman,
>>>>>
>>>>> Thanks for doing the evaluation of the problem.
>>>>>
>>>>> Generally, the ManifoldCF project does not have the expertise to
>>>>> diagnose problems with external systems like Solr or Elasticsearch.  So
>>>>> going to another newsgroup for those kinds of issues would be a good idea.
>>>>>
>>>>> Thanks!
>>>>> Karl
>>>>>
>>>>>
>>>>> On Tue, Sep 5, 2017 at 4:33 AM, Beelz Ryuzaki <i93othman@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Karl,
>>>>>>
>>>>>> I have analyzed the error and found out that it was mainly an
>>>>>> elasticsearch problem. I saw in some forums that one of the adopted
>>>>>> solution is to modify elasticsearch.yml and set the http.max_content_length
>>>>>> to a greater value. However, the job got stuck in the last two indexable
>>>>>> files ( two pptx files with 22Mo and 2Mo respectively). The job eventually
>>>>>> ended but a stack trace showed that elasticsearch ran out of memory. For
>>>>>> your information, I have allocated 4Go for elasticsearch execution. Is it
>>>>>> enough in order to have a good performance. You will find attached the
>>>>>> stack traces of elasticsearch.
>>>>>>
>>>>>> Best regards,
>>>>>>
>>>>>> Othman BELHAJ.
>>>>>>
>>>>>> On Mon, 4 Sep 2017 at 16:40, Beelz Ryuzaki <i93othman@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Karl,
>>>>>>>
>>>>>>> I'm sorry to bother on your holiday. I will try to analyze it today
>>>>>>> and let it you know what I have found. Enjoy your day !
>>>>>>>
>>>>>>> Best regards,
>>>>>>>
>>>>>>> Othman BELHAJ.
>>>>>>>
>>>>>>> On Mon, 4 Sep 2017 at 16:06, Karl Wright <daddywri@gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi Othman,
>>>>>>>>
>>>>>>>> I won't be able to look at this today; it is a holiday here.  But,
>>>>>>>> the "socket write" error is coming from ElasticSearch.  If ES is configured
>>>>>>>> to not accept documents greater than a certain size, that might explain
>>>>>>>> it.  Maybe the ES logs would help?
>>>>>>>>
>>>>>>>> I'm afraid you're going to need to do the work to find out what is
>>>>>>>> going wrong in those cases now.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Karl
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, Sep 4, 2017 at 4:53 AM, Beelz Ryuzaki <i93othman@gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi Karl,
>>>>>>>>>
>>>>>>>>> This morning, I have tried the zookeeper based file and it worked
>>>>>>>>> really good. However, I still have one error which is bugging me. It is a
>>>>>>>>> socket write error. You will find attached the simple history report.
>>>>>>>>> Surprisingly, I didn't have any stack trace in the ManifoldCF log file.
>>>>>>>>>
>>>>>>>>> Best regards,
>>>>>>>>>
>>>>>>>>> Othman.
>>>>>>>>>
>>>>>>>>> On Fri, 1 Sep 2017 at 19:39, Karl Wright <daddywri@gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> This is from file locking yet again.
>>>>>>>>>>
>>>>>>>>>> I have uploaded a new RC.  Please download and try out the
>>>>>>>>>> zookeeper locking.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.8.1
>>>>>>>>>>
>>>>>>>>>> Karl
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Fri, Sep 1, 2017 at 1:11 PM, Beelz Ryuzaki <
>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> There is another issue as well that gives the following stack
>>>>>>>>>>> trace.
>>>>>>>>>>>
>>>>>>>>>>> Othman.
>>>>>>>>>>>
>>>>>>>>>>> On Fri, 1 Sep 2017 at 18:05, Beelz Ryuzaki <i93othman@gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>
>>>>>>>>>>>> I took the binary from the ManifoldCF 2.8.1 RC0. It had the
>>>>>>>>>>>> version 3.9 of POI and when I changed the version to 3.15 it worked fine. I
>>>>>>>>>>>> really want to try the zookeeper if as you told me its performance is
>>>>>>>>>>>> better than the file-based example. For the time being, I'm using the
>>>>>>>>>>>> file-based because it is the only part that works for me but I actually
>>>>>>>>>>>> need a stable version for my production environment. That is one point.
>>>>>>>>>>>> Another point is, the path's tab is still an issue for me
>>>>>>>>>>>> because I exclude some files and it still crawls them. I want to exclude
>>>>>>>>>>>> some specific extensions of files and some specific directories. For
>>>>>>>>>>>> instance, i don't want to index .exe files and contains a specific word. I
>>>>>>>>>>>> do as follows I make the first exclude with *.exe and the second one with
>>>>>>>>>>>> *word*. Only the second one which doesn't work. How can I solve this issue,
>>>>>>>>>>>> please?
>>>>>>>>>>>>
>>>>>>>>>>>> Thank you very much, have a nice week-end,
>>>>>>>>>>>>
>>>>>>>>>>>> Othman
>>>>>>>>>>>> On Fri, 1 Sep 2017 at 16:46, Karl Wright <daddywri@gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I will respin a new 2.8.1 (RC1) to address the zookeeper issue.
>>>>>>>>>>>>>
>>>>>>>>>>>>> The failure you are seeing is "NoSuchMethodError".  Therefore,
>>>>>>>>>>>>> the class is being found, but it is the *wrong* class.  When you deployed
>>>>>>>>>>>>> the new release, did you deploy it in a new directory, or did you overwrite
>>>>>>>>>>>>> the previous deployment?  If you overwrote it, you probably have multiple
>>>>>>>>>>>>> versions of the POI jars.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, Sep 1, 2017 at 9:59 AM, Beelz Ryuzaki <
>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I have just tried the new release of ManifoldCF. At first,
>>>>>>>>>>>>>> the first job ended normally, but in the second I got a new stack trace
>>>>>>>>>>>>>> concerning the POI. Moreover, the runzookeeper.bat doesn't run properly. It
>>>>>>>>>>>>>> shows me the stack trace attached.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ps:
>>>>>>>>>>>>>> The second attached file contains the POI stack trace.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Fri, 1 Sep 2017 at 12:21, Karl Wright <daddywri@gmail.com>
>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> You do not need a new database instance.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> You can download MCF 2.8.1 RC0 from here:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> https://dist.apache.org/repos/dist/dev/manifoldcf/apache-manifoldcf-2.8.1
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Fri, Sep 1, 2017 at 5:42 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thank you very much for your help, I'm going to try out the
>>>>>>>>>>>>>>>> zookeeper example. Should I initialize a new database? And how can I run
>>>>>>>>>>>>>>>> the zookeeper start-agent ?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Fri, 1 Sep 2017 at 11:37, Karl Wright <
>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> These exceptions are now coming from file locking and are
>>>>>>>>>>>>>>>>> due to permissions problems.  I suggest you go to Zookeeper for file
>>>>>>>>>>>>>>>>> locking.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I am building a 2.8.1 release candidate.  When it
>>>>>>>>>>>>>>>>> available for download, I'll send you the URL.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Fri, Sep 1, 2017 at 5:27 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> This morning, I have followed the steps you told me to do
>>>>>>>>>>>>>>>>>> and I still got stack traces. I have attached the stack traces as well as
>>>>>>>>>>>>>>>>>> the content of my lib repo and option.env.
>>>>>>>>>>>>>>>>>> I have installed zookeeper and I'm ready to use the
>>>>>>>>>>>>>>>>>> zookeeper example. Could you guide through it? I don't know if I follow the
>>>>>>>>>>>>>>>>>> same steps in the file based example, I may not get stack traces.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 18:19, Karl Wright <
>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Please do the following:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> (0) Shut down all ManifoldCF processes.
>>>>>>>>>>>>>>>>>>> (1) Move poi*.jar from connector-common-lib to lib.
>>>>>>>>>>>>>>>>>>> (2) Move dom4j*.jar from connector-common-lib to lib.
>>>>>>>>>>>>>>>>>>> (3) Move commons-collections4*.jar from
>>>>>>>>>>>>>>>>>>> connector-common-lib to lib.
>>>>>>>>>>>>>>>>>>> (4) Move xmlbeans*.java from connector-common-lib to lib.
>>>>>>>>>>>>>>>>>>> (5) Move curvesapi*.jar from connector-common-lib to lib.
>>>>>>>>>>>>>>>>>>> (6) Modify your options.env to include all of the jars
>>>>>>>>>>>>>>>>>>> you moved.
>>>>>>>>>>>>>>>>>>> (7) Start up all ManifoldCF processes.
>>>>>>>>>>>>>>>>>>> (8) If you still get stack traces, please send them to
>>>>>>>>>>>>>>>>>>> me.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 12:12 PM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> By 'other place', do you mean the \lib repository? If
>>>>>>>>>>>>>>>>>>>> that so, then I have already tried it and it didn't work.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 18:07, Karl Wright <
>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I used the java dependency inspector to see what the
>>>>>>>>>>>>>>>>>>>>> issue is and it turns out that poi-ooxml.jar does refer back to poi.jar in
>>>>>>>>>>>>>>>>>>>>> the class that is failing.  So you will need to move poi-3.15.jar and
>>>>>>>>>>>>>>>>>>>>> commons-collections4-1.4.jar to the other place as well.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Let's hope that finally fixes this issue.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I'm very unhappy about the quality of the POI project
>>>>>>>>>>>>>>>>>>>>> code; it is definitely not using reasonable engineering practices, and I
>>>>>>>>>>>>>>>>>>>>> will be opening a ticket with them.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 11:57 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I'm using the file based example and all the changes
>>>>>>>>>>>>>>>>>>>>>> you told me to do. I reproduced them in the file based example. I'll try to
>>>>>>>>>>>>>>>>>>>>>> install zookeeper and use the zookeeper example. Will I need a
>>>>>>>>>>>>>>>>>>>>>> configuration to do in order to run the zookeeper example ?
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:46, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Are you using the zookeeper example, or the
>>>>>>>>>>>>>>>>>>>>>>> file-based example?
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> If these jars have all been moved, and the
>>>>>>>>>>>>>>>>>>>>>>> options.env includes them, then I have to conclude that Apache POI's
>>>>>>>>>>>>>>>>>>>>>>> pom.xml is incorrect too.  It will take a while to figure out what's
>>>>>>>>>>>>>>>>>>>>>>> missing that poi-ooxml.jar needs that is not listed.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 11:39 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> All the dependencies you mentioned have already
>>>>>>>>>>>>>>>>>>>>>>>> been added in the options.env.win file in the multiprocess-file-example
>>>>>>>>>>>>>>>>>>>>>>>> repository.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:33, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Yes, I added it in the options.env.win file.
>>>>>>>>>>>>>>>>>>>>>>>>> Should it be the one in the multiprocess-zk-example document or
>>>>>>>>>>>>>>>>>>>>>>>>> multiprocess-file-example ?
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:30, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> It's not related at all to elasticsearch.
>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 11:26 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Could it be a problem of elasticsearch's version
>>>>>>>>>>>>>>>>>>>>>>>>>>> ? I'm actually using 2.1.0 which is pretty old for this new version of
>>>>>>>>>>>>>>>>>>>>>>>>>>> ManifoldCF?
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:23, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> I moved back both the jars you mentioned and a
>>>>>>>>>>>>>>>>>>>>>>>>>>>> different is showing. You will find the stack trace attached.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 17:09, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I've looked at the dependencies; you should
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not have moved poi-3.15.jar.  Please move that back, and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> commons-collections4-4.1.jar too.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You *will* need to move curvesapi-1.04.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> though.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 11:04 AM, Karl Wright
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you include poi.jar, then all dependencies
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of poi.jar must also be included.  This would mean that curvesapi-1.04.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and commons-collections4-4.1.jar should also be included.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 10:23 AM, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Karl,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I added the two jars that you have mentioned
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and another one : poi-3.15.jar . Unfortunately, there is another error
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> showing. This time, it concerns excel files. You will find attached the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> stack trace.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 15:32, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, this shows that the jar we moved calls
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> back into another jar, which will also need to be moved.  *That* jar has
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> yet another dependency too.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The list of jars is thus extended to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> include:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> poi-ooxml-3.15.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dom4j-1.6.1.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 9:25 AM, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You will find attached the stack trace. My
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> apologies for the bad quality of the image, I'm doing my best to send you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the stack trace as I don't have the right to send documents outside the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> company.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your time,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 15:16, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Once again, I need a stack trace to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> diagnose what the problem is.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 9:14 AM, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Oh, actually it didn't solve the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problem. I looked into the log file and saw the following error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Error tossed :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> org/apache/poi/POIXMLTypeLoader
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> java.lang.NoClassDefFoundError:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> org/apache/poi/POIXMLTypeLoader.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Maybe another jar is missing ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 15:01, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I have tried what you told me to do,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and you expected the crawling resumed. How about the regular expressions?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> How can I make complex regular expressions in the job's paths tab ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you very much for your help.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 14:47, Beelz
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ryuzaki <i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ok, I will try it right away and let
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you know if it works.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 14:15, Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wright <daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Oh, and you also may need to edit
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your options.env files to include them in the classpath for startup.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 7:53 AM, Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wright <daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you are amenable, there is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> another workaround you could try.  Specifically:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (1) Shut down all MCF processes.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (2) Move the following two files
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from connector-common-lib to lib:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> xmlbeans-2.6.0.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> poi-ooxml-schemas-3.15.jar
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (3) Restart everything and see if
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your crawl resumes.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please let me know what happens.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 7:33 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl Wright <daddywri@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I created a ticket for this:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CONNECTORS-1450.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> One simple workaround is to use the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> external Tika server transformer rather than the embedded Tika Extractor.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm still looking into why the jar is not being found.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 7:08 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Beelz Ryuzaki <i93othman@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, I'm actually using the latest
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> binary version, and my job got stuck on that specific file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The job status is still Running.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can see it in the attached file. For your information, the job started
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> yesterday.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 13:04, Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Wright <daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> It looks like a dependency of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Apache POI is missing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I think we will need a ticket to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> address this, if you are indeed using the binary distribution.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 6:57 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm actually using the binary
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version. For security reasons, I can't send any files from my computer. I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have copied the stack trace and scanned it with my cellphone. I hope it
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will be helpful. Meanwhile, I have read the documentation about how to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restrict the crawling and I don't think the '|' works in the specified. For
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instance, I would like to restrict the crawling for the documents that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> counts the 'sound' word . I proceed as follows: *(SON)* . the document is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with capital letters and I noticed that it didn't take it into
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> consideration.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, 31 Aug 2017 at 12:40,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl Wright <daddywri@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The way you restrict documents
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with the windows share connector is by specifying information on the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Paths" tab in jobs that crawl windows shares.  There is end-user
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documentation both online and distributed with all binary distributions
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that describe how to do this.  Have you found it?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Thu, Aug 31, 2017 at 5:25
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello Karl,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for your response, I
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will start using zookeeper and I will let you know if it works. I have
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> another question to ask. Actually, I need to make some filters while
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> crawling. I don't want to crawl some files and some folders. Could you give
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> me an example of how to use the regex. Does the regex allow to use /i to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ignore cases ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, 30 Aug 2017 at 19:53,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Beelz,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> File-based sync is deprecated
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> because people often have problems with getting file permissions right, and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> they do not understand how to shut processes down cleanly, and zookeeper is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> resilient against that.  I highly recommend using zookeeper sync.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ManifoldCF is engineered to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not put files into memory so you do not need huge amounts of memory.  The
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> default values are more than enough for 35,000 files, which is a pretty
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> small job for ManifoldCF.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 30, 2017 at 11:58
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm actually not using
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> zookeeper. i want to know how is zookeeper different from file based sync?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I also need a guidance on how to manage my pc's memory. How many Go should
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I allocate for the start-agent of ManifoldCF? Is 4Go enough in order to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> crawler 35K files ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, 30 Aug 2017 at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 16:11, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Your disk is not writable
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for some reason, and that's interfering with ManifoldCF 2.8 locking.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I would suggest two things:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (1) Use Zookeeper for sync
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instead of file-based sync.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (2) Have a look if you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> still get failures after that.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 30, 2017 at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 9:37 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Mr Karl,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you Mr Karl for your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> quick response. I have looked into the ManifoldCF log file and extracted
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the following warnings :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Attempt to set file lock
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'D:\xxxx\apache_manifoldcf-2.8\multiprocess-file-example\.\.\synch
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> area\569\352\lock-_POOLTARGET_OUTPUTCONNECTORPOOL_ES (Lowercase)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Synapses.lock' failed : Access is denied.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> - Couldn't write to lock
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file; disk may be full. Shutting down process; locks may be left dangling.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You must cleanup before restarting.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ES (lowercase) synapses
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> being the elasticsearch output connection. Moreover, the job uses Tika to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> extract metadata and a file system as a repository connection. During the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> job, I don't extract the content of the documents. I was wandering if the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> issue comes from elasticsearch ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, 30 Aug 2017 at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 14:08, Karl Wright <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> daddywri@gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Othman,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ManifoldCF aborts a job
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if there's an error that looks like it might go away on retry, but does
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not.  It can be either on the repository side or on the output side.  If
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you look at the Simple History in the UI, or at the manifoldcf.log file,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you should be able to get a better sense of what went wrong.  Without
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> further information, I can't say any more.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Karl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 30, 2017 at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 5:33 AM, Beelz Ryuzaki <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i93othman@gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm Othman Belhaj, a
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> software engineer from société générale in France. I'm actually using your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> recent version of manifoldCF 2.8 . I'm working on an internal search
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> engine. For this reason, I'm using manifoldcf in order to index documents
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> on windows shares. I encountered a serious problem while crawling 35K
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documents. Most of the time, when manifoldcf start crawling a big sized
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> documents (19Mo for example), it ends the job with the following error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> repeated service interruptions - failure processing document : software
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> caused connection abort: socket write error.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Can you give me some
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tips on how to solve this problem, please ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I use PostgreSQL 9.3.x
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and elasticsearch 2.1.0 .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm looking forward for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your response.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Othman BELHAJ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>
>>>
>

Mime
View raw message