manifoldcf-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From <karl.wri...@nokia.com>
Subject RE: Sharepoint Connector
Date Mon, 21 Jun 2010 15:34:33 GMT
Yes.  You are still missing:

Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral,
 PublicKeyToken=71e9bce111e9429c, processorArchitecture=MSIL

That's a file, usually called "SharePoint.dll", which should be put in the place the error
message below tells you.  Alternatively, you can simply install SharePoint and it should put
the file in the right place.

Karl


-----Original Message-----
From: ext Rohan.GPatil@cognizant.com [mailto:Rohan.GPatil@cognizant.com]
Sent: Monday, June 21, 2010 11:17 AM
To: connectors-user@incubator.apache.org
Subject: RE: Sharepoint Connector


Hi,

Well fixed the registry settings and still encounter this,


Are some references missing?



Buildfile: D:\Rohan\LCF\modules\connectors\sharepoint\build.xml

calculate-condition:

precompile-check:

build-webservice:
     [exec] Microsoft (R) Build Engine Version 2.0.50727.4927
     [exec] [Microsoft .NET Framework, Version 2.0.50727.4927]
     [exec] Copyright (C) Microsoft Corporation 2005. All rights reserved.
     [exec]
     [exec] Could Not Find D:\Rohan\LCF\modules\connectors\sharepoint\webservice
\bin\*.dll
     [exec] The system cannot find the file specified.
     [exec] Build started 6/21/2010 8:41:09 PM.
     [exec] __________________________________________________
     [exec] Project "D:\Rohan\LCF\modules\connectors\sharepoint\webservice\MCPer
missionsService.csproj" (default targets):
     [exec]
     [exec] Target ResolveAssemblyReferences:
     [exec]     Primary reference "Microsoft.SharePoint, Version=12.0.0.0, Cultu
re=neutral, PublicKeyToken=71e9bce111e9429c, processorArchitecture=MSIL".
     [exec]     c:\windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.t
argets : warning MSB3245: Could not resolve this reference. Could not locate the
 assembly "Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyTok
en=71e9bce111e9429c, processorArchitecture=MSIL". Check to make sure the assembl
y exists on disk. If this reference is required by your code, you may get compil
ation errors.
     [exec]             For SearchPath "{TargetFrameworkDirectory}".
     [exec]             Considered "C:\Windows\Microsoft.NET\Framework\v2.0.5072
7\Microsoft.SharePoint.exe", but it didn't exist.
     [exec]             Considered "C:\Windows\Microsoft.NET\Framework\v2.0.5072
7\Microsoft.SharePoint.dll", but it didn't exist.
     [exec]             For SearchPath "{AssemblyFolders}".
     [exec]             Considered "C:\Program Files\Reference Assemblies\Micros
oft\Framework\v3.5\Microsoft.SharePoint.exe", but it didn't exist.
     [exec]             Considered "C:\Program Files\Reference Assemblies\Micros
oft\Framework\v3.5\Microsoft.SharePoint.dll", but it didn't exist.
     [exec]             For SearchPath "{GAC}".
     [exec]             Considered "Microsoft.SharePoint, Version=12.0.0.0, Cult
ure=neutral, PublicKeyToken=71e9bce111e9429c, processorArchitecture=MSIL", which
 was not found in the GAC.
     [exec]             For SearchPath "{RawFileName}".
     [exec]             Considered treating "Microsoft.SharePoint, Version=12.0.
0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c, processorArchitecture=MSI
L" as a file name, but it didn't exist.
     [exec]             For SearchPath "bin\".
     [exec]             Considered "bin\Microsoft.SharePoint.exe", but it didn't
 exist.
     [exec]             Considered "bin\Microsoft.SharePoint.dll", but it didn't
 exist.
     [exec] Done building target "ResolveAssemblyReferences" in project "MCPermi
ssionsService.csproj".
     [exec] Target CoreCompile:
     [exec]     C:\Windows\Microsoft.NET\Framework\v2.0.50727\Csc.exe /noconfig
/nowarn:1701,1702 /errorreport:prompt /warn:4 /define:DEBUG;TRACE /reference:C:\
Windows\Microsoft.NET\Framework\v2.0.50727\System.Configuration.dll /reference:C
:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Data.dll /reference:C:\Windo
ws\Microsoft.NET\Framework\v2.0.50727\System.dll /reference:C:\Windows\Microsoft
.NET\Framework\v2.0.50727\System.Drawing.dll /reference:C:\Windows\Microsoft.NET
\Framework\v2.0.50727\System.EnterpriseServices.dll /reference:C:\Windows\Micros
oft.NET\Framework\v2.0.50727\System.Web.dll /reference:C:\Windows\Microsoft.NET\
Framework\v2.0.50727\System.Web.Mobile.dll /reference:C:\Windows\Microsoft.NET\F
ramework\v2.0.50727\System.Web.Services.dll /reference:C:\Windows\Microsoft.NET\
Framework\v2.0.50727\System.Xml.dll /debug+ /debug:full /keyfile:MetaCarta.snk /
optimize- /out:obj\Debug\MetaCarta.SharePoint.dll /target:library MCPermissions.
cs Properties\AssemblyInfo.cs Properties\Settings.Designer.cs "Web References\SP
PermissionsService\Reference.cs"
     [exec]     MCPermissions.cs(28,17): error CS0234: The type or namespace nam
e 'SharePoint' does not exist in the namespace 'Microsoft' (are you missing an a
ssembly reference?)
     [exec]     MCPermissions.cs(137,63): error CS0246: The type or namespace na
me 'SPPrincipal' could not be found (are you missing a using directive or an ass
embly reference?)
     [exec]     MCPermissions.cs(137,83): error CS0246: The type or namespace na
me 'SPRoleDefinition' could not be found (are you missing a using directive or a
n assembly reference?)
     [exec] Done building target "CoreCompile" in project "MCPermissionsService.
csproj" -- FAILED.
     [exec]
     [exec] Done building project "MCPermissionsService.csproj" -- FAILED.
     [exec]
     [exec] Build FAILED.
     [exec] c:\windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targe
ts : warning MSB3245: Could not resolve this reference. Could not locate the ass
embly "Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=7
1e9bce111e9429c, processorArchitecture=MSIL". Check to make sure the assembly ex
ists on disk. If this reference is required by your code, you may get compilatio
n errors.
     [exec] MCPermissions.cs(28,17): error CS0234: The type or namespace name 'S
harePoint' does not exist in the namespace 'Microsoft' (are you missing an assem
bly reference?)
     [exec] MCPermissions.cs(137,63): error CS0246: The type or namespace name '
SPPrincipal' could not be found (are you missing a using directive or an assembl
y reference?)
     [exec] MCPermissions.cs(137,83): error CS0246: The type or namespace name '
SPRoleDefinition' could not be found (are you missing a using directive or an as
sembly reference?)
     [exec]     1 Warning(s)
     [exec]     3 Error(s)
     [exec]
     [exec] Time Elapsed 00:00:00.43
     [exec] Cabinet Maker - Lossless Data Compression Tool
     [exec]
     [exec] Parsing directives
     [exec] Parsing directives (MCPermissionsService.ddf: 1 lines)MCPermissionsS
ervice.ddf(26): ERROR: Could not find file: bin\MetaCarta.SharePoint.dll
     [exec] ERROR: MakeCAB aborted: 1 errors encountered
     [exec] Result: 1

BUILD SUCCESSFUL
Total time: 1 second



Thanks & Regards,
Rohan G Patil
Cognizant  Programmer Analyst Trainee,Bangalore || Mob # +91 9535577001
Rohan.GPatil@cognizant.com


-----Original Message-----
From: G Patil, Rohan (Cognizant)
Sent: Monday, June 21, 2010 8:25 PM
To: 'connectors-user@incubator.apache.org'
Subject: RE: Sharepoint Connector

Hi,

Encountered this



Buildfile: D:\Rohan\LCF\modules\connectors\sharepoint\build.xml

calculate-condition:

precompile-check:

build-webservice:
     [copy] Copying 1 file to D:\Rohan\LCF\modules\connectors\sharepoint\webserv
ice\References\SPPermissionsService
     [exec] The system cannot find the file specified.
     [exec] The system cannot find the file specified.
     [exec] Microsoft (R) Build Engine Version 2.0.50727.4927
     [exec] [Microsoft .NET Framework, Version 2.0.50727.4927]
     [exec] Copyright (C) Microsoft Corporation 2005. All rights reserved.
     [exec]
     [exec] Build started 6/21/2010 8:06:03 PM.
     [exec] __________________________________________________
     [exec] Project "D:\Rohan\LCF\modules\connectors\sharepoint\webservice\MCPer
missionsService.csproj" (default targets):
     [exec]
     [exec] Target GetFrameworkPaths:
     [exec]     Could not locate the .NET Framework SDK.  The task is looking fo
r the path to the .NET Framework SDK at the location specified in the SDKInstall
Rootv2.0 value of the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFra
mework.  You may be able to solve the problem by doing one of the following:  1.
) Install the .NET Framework SDK.  2.) Manually set the above registry key to th
e correct location.
     [exec] Target PrepareForBuild:
     [exec]     Creating directory "bin\".
     [exec]     Creating directory "obj\Debug\".
     [exec] Target ResolveAssemblyReferences:
     [exec]     Primary reference "Microsoft.SharePoint, Version=12.0.0.0, Cultu
re=neutral, PublicKeyToken=71e9bce111e9429c, processorArchitecture=MSIL".
     [exec]     c:\windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.t
argets : warning MSB3245: Could not resolve this reference. Could not locate the
 assembly "Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyTok
en=71e9bce111e9429c, processorArchitecture=MSIL". Check to make sure the assembl
y exists on disk. If this reference is required by your code, you may get compil
ation errors.
     [exec]             For SearchPath "{TargetFrameworkDirectory}".
     [exec]             Considered "C:\Windows\Microsoft.NET\Framework\v2.0.5072
7\Microsoft.SharePoint.exe", but it didn't exist.
     [exec]             Considered "C:\Windows\Microsoft.NET\Framework\v2.0.5072
7\Microsoft.SharePoint.dll", but it didn't exist.
     [exec]             For SearchPath "{AssemblyFolders}".
     [exec]             Considered "C:\Program Files\Reference Assemblies\Micros
oft\Framework\v3.5\Microsoft.SharePoint.exe", but it didn't exist.
     [exec]             Considered "C:\Program Files\Reference Assemblies\Micros
oft\Framework\v3.5\Microsoft.SharePoint.dll", but it didn't exist.
     [exec]             For SearchPath "{GAC}".
     [exec]             Considered "Microsoft.SharePoint, Version=12.0.0.0, Cult
ure=neutral, PublicKeyToken=71e9bce111e9429c, processorArchitecture=MSIL", which
 was not found in the GAC.
     [exec]             For SearchPath "{RawFileName}".
     [exec]             Considered treating "Microsoft.SharePoint, Version=12.0.
0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c, processorArchitecture=MSI
L" as a file name, but it didn't exist.
     [exec]             For SearchPath "bin\".
     [exec]             Considered "bin\Microsoft.SharePoint.exe", but it didn't
 exist.
     [exec]             Considered "bin\Microsoft.SharePoint.dll", but it didn't
 exist.
     [exec] Done building target "ResolveAssemblyReferences" in project "MCPermi
ssionsService.csproj".
     [exec] Target CoreCompile:
     [exec]     C:\Windows\Microsoft.NET\Framework\v2.0.50727\Csc.exe /noconfig
/nowarn:1701,1702 /errorreport:prompt /warn:4 /define:DEBUG;TRACE /reference:C:\
Windows\Microsoft.NET\Framework\v2.0.50727\System.Configuration.dll /reference:C
:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Data.dll /reference:C:\Windo
ws\Microsoft.NET\Framework\v2.0.50727\System.dll /reference:C:\Windows\Microsoft
.NET\Framework\v2.0.50727\System.Drawing.dll /reference:C:\Windows\Microsoft.NET
\Framework\v2.0.50727\System.EnterpriseServices.dll /reference:C:\Windows\Micros
oft.NET\Framework\v2.0.50727\System.Web.dll /reference:C:\Windows\Microsoft.NET\
Framework\v2.0.50727\System.Web.Mobile.dll /reference:C:\Windows\Microsoft.NET\F
ramework\v2.0.50727\System.Web.Services.dll /reference:C:\Windows\Microsoft.NET\
Framework\v2.0.50727\System.Xml.dll /debug+ /debug:full /keyfile:MetaCarta.snk /
optimize- /out:obj\Debug\MetaCarta.SharePoint.dll /target:library MCPermissions.
cs Properties\AssemblyInfo.cs Properties\Settings.Designer.cs "Web References\SP
PermissionsService\Reference.cs"
     [exec]     MCPermissions.cs(28,17): error CS0234: The type or namespace nam
e 'SharePoint' does not exist in the namespace 'Microsoft' (are you missing an a
ssembly reference?)
     [exec]     MCPermissions.cs(137,63): error CS0246: The type or namespace na
me 'SPPrincipal' could not be found (are you missing a using directive or an ass
embly reference?)
     [exec]     MCPermissions.cs(137,83): error CS0246: The type or namespace na
me 'SPRoleDefinition' could not be found (are you missing a using directive or a
n assembly reference?)
     [exec] Done building target "CoreCompile" in project "MCPermissionsService.
csproj" -- FAILED.
     [exec]
     [exec] Done building project "MCPermissionsService.csproj" -- FAILED.
     [exec]
     [exec] Build FAILED.
     [exec] c:\windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targe
ts : warning MSB3245: Could not resolve this reference. Could not locate the ass
embly "Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=7
1e9bce111e9429c, processorArchitecture=MSIL". Check to make sure the assembly ex
ists on disk. If this reference is required by your code, you may get compilatio
n errors.
     [exec] MCPermissions.cs(28,17): error CS0234: The type or namespace name 'S
harePoint' does not exist in the namespace 'Microsoft' (are you missing an assem
bly reference?)
     [exec] MCPermissions.cs(137,63): error CS0246: The type or namespace name '
SPPrincipal' could not be found (are you missing a using directive or an assembl
y reference?)
     [exec] MCPermissions.cs(137,83): error CS0246: The type or namespace name '
SPRoleDefinition' could not be found (are you missing a using directive or an as
sembly reference?)
     [exec]     1 Warning(s)
     [exec]     3 Error(s)
     [exec]
     [exec] Time Elapsed 00:00:01.89
     [exec] Cabinet Maker - Lossless Data Compression Tool
     [exec]
     [exec] Parsing directives
     [exec] Parsing directives (MCPermissionsService.ddf: 1 lines)MCPermissionsS
ervice.ddf(26): ERROR: Could not find file: bin\MetaCarta.SharePoint.dll
     [exec] ERROR: MakeCAB aborted: 1 errors encountered
     [exec] Result: 1

BUILD SUCCESSFUL
Total time: 3 seconds


I have the latest .Net Framework installed. And the Registry also is reflecting the proper
Path to the .Net Framework path.

Is visual Studio absolutely necessary ?


Thanks & Regards,
Rohan G Patil
Cognizant  Programmer Analyst Trainee,Bangalore || Mob # +91 9535577001
Rohan.GPatil@cognizant.com




-----Original Message-----
From: karl.wright@nokia.com [mailto:karl.wright@nokia.com]
Sent: Monday, June 21, 2010 7:58 PM
To: connectors-user@incubator.apache.org
Subject: RE: Sharepoint Connector

That's because you need to follow the instructions to build it.
Karl

-----Original Message-----
From: ext Rohan.GPatil@cognizant.com [mailto:Rohan.GPatil@cognizant.com]
Sent: Monday, June 21, 2010 9:22 AM
To: connectors-user@incubator.apache.org
Subject: RE: Sharepoint Connector


Hi,

But there seems to be one more problem the file "MetaCarta.SharePoint.MCPermissionsService.wsp"
is not available. Which is needed to install the webservice.

Thanks & Regards,
Rohan G Patil
Cognizant  Programmer Analyst Trainee,Bangalore || Mob # +91 9535577001
Rohan.GPatil@cognizant.com


-----Original Message-----
From: karl.wright@nokia.com [mailto:karl.wright@nokia.com]
Sent: Monday, June 21, 2010 3:34 PM
To: connectors-user@incubator.apache.org
Subject: RE: Sharepoint Connector

(1) Please read the deployment directions.  You must install the MCPermissions service on
the SharePoint server, if it is SharePoint 3.0 or higher and you need security.  (If you don't
need security, just select SharePoint 2.0).
(2) Authentication errors are difficult to diagnose, but I would certainly fix problem (1)
before assuming there's a problem.

Karl

________________________________________
From: ext Rohan.GPatil@cognizant.com [Rohan.GPatil@cognizant.com]
Sent: Monday, June 21, 2010 2:19 AM
To: connectors-user@incubator.apache.org
Cc: Wright Karl (Nokia-S/Cambridge)
Subject: Sharepoint Connector

Hi! (especially Karl!)

I have two doubts about the Sharepoint Connector.

1) There is a wsdl called MCPermissions in the wsdls directory of
Sharepoint Connector.

Should I delete that, Or should I leave it as it is with the other wsdls
which we put there prior to building LCF and due to that 302 error is
displayed i.e. on hitting this
"http://corp.organisation.com/sites/somewhere/_vti_bin/MCPermissions.asm
x" link in the browser, its being redirected to file not found error
page.


2) And using the credentials, I can access the wsdls from the browser
i.e. Only by GET method.

But the POST is throwing Authentication errors.

Which type of credentials should I use to connect to Sharepoint.



Thanks & Regards,
Rohan G Patil





This e-mail and any files transmitted with it are for the sole use of
the intended recipient(s) and may contain confidential and privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on this
e-mail is strictly prohibited and may be unlawful.



This e-mail and any files transmitted with it are for the sole use of
the intended recipient(s) and may contain confidential and privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on this
e-mail is strictly prohibited and may be unlawful.



This e-mail and any files transmitted with it are for the sole use of
the intended recipient(s) and may contain confidential and privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorized review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on this
e-mail is strictly prohibited and may be unlawful.



Mime
View raw message