lucenenet-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From ccurr...@apache.org
Subject [Lucene.Net] svn commit: r1294826 [2/6] - in /incubator/lucene.net/branches/Lucene.Net.3.0.3/trunk: ./ build/vs2010/contrib/ build/vs2010/test/ lib/ lib/NUnit.org/NUnit/2.5.9/ lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/ lib/NUnit.org/NUnit/2.5.9/doc/ src/ src/...
Date Tue, 28 Feb 2012 20:52:36 GMT
Modified: incubator/lucene.net/branches/Lucene.Net.3.0.3/trunk/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.framework.xml
URL: http://svn.apache.org/viewvc/incubator/lucene.net/branches/Lucene.Net.3.0.3/trunk/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.framework.xml?rev=1294826&r1=1294825&r2=1294826&view=diff
==============================================================================
--- incubator/lucene.net/branches/Lucene.Net.3.0.3/trunk/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.framework.xml (original)
+++ incubator/lucene.net/branches/Lucene.Net.3.0.3/trunk/lib/NUnit.org/NUnit/2.5.9/bin/net-1.1/framework/nunit.framework.xml Tue Feb 28 20:52:32 2012
@@ -1,20 +1,20 @@
-<?xml version="1.0"?>
-<doc>
-    <assembly>
-        <name>nunit.framework</name>
-    </assembly>
-    <members>
-        <member name="T:NUnit.Framework.CategoryAttribute">
+<?xml version="1.0"?>
+<doc>
+    <assembly>
+        <name>nunit.framework</name>
+    </assembly>
+    <members>
+        <member name="T:NUnit.Framework.CategoryAttribute">
             <summary>
             Attribute used to apply a category to a test
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.CategoryAttribute.categoryName">
+        </member>
+        <member name="F:NUnit.Framework.CategoryAttribute.categoryName">
             <summary>
             The name of the category
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.CategoryAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.CategoryAttribute.#ctor(System.String)">
             <summary>
             Construct attribute for a given category based on
             a name. The name may not contain the characters ',',
@@ -26,239 +26,239 @@
             runnable.
             </summary>
             <param name="name">The name of the category</param>
-        </member>
-        <member name="M:NUnit.Framework.CategoryAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.CategoryAttribute.#ctor">
             <summary>
             Protected constructor uses the Type name as the name
             of the category.
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.CategoryAttribute.Name">
+        </member>
+        <member name="P:NUnit.Framework.CategoryAttribute.Name">
             <summary>
             The name of the category
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.DatapointAttribute">
+        </member>
+        <member name="T:NUnit.Framework.DatapointAttribute">
             <summary>
             Used to mark a field for use as a datapoint when executing a theory
             within the same fixture that requires an argument of the field's Type.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.DatapointsAttribute">
+        </member>
+        <member name="T:NUnit.Framework.DatapointsAttribute">
             <summary>
             Used to mark an array as containing a set of datapoints to be used
             executing a theory within the same fixture that requires an argument 
             of the Type of the array elements.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.DescriptionAttribute">
+        </member>
+        <member name="T:NUnit.Framework.DescriptionAttribute">
             <summary>
             Attribute used to provide descriptive text about a 
             test case or fixture.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.DescriptionAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.DescriptionAttribute.#ctor(System.String)">
             <summary>
             Construct the attribute
             </summary>
             <param name="description">Text describing the test</param>
-        </member>
-        <member name="P:NUnit.Framework.DescriptionAttribute.Description">
+        </member>
+        <member name="P:NUnit.Framework.DescriptionAttribute.Description">
             <summary>
             Gets the test description
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.MessageMatch">
+        </member>
+        <member name="T:NUnit.Framework.MessageMatch">
             <summary>
             Enumeration indicating how the expected message parameter is to be used
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.MessageMatch.Exact">
+        </member>
+        <member name="F:NUnit.Framework.MessageMatch.Exact">
             Expect an exact match
-        </member>
-        <member name="F:NUnit.Framework.MessageMatch.Contains">
+        </member>
+        <member name="F:NUnit.Framework.MessageMatch.Contains">
             Expect a message containing the parameter string
-        </member>
-        <member name="F:NUnit.Framework.MessageMatch.Regex">
+        </member>
+        <member name="F:NUnit.Framework.MessageMatch.Regex">
             Match the regular expression provided as a parameter
-        </member>
-        <member name="F:NUnit.Framework.MessageMatch.StartsWith">
+        </member>
+        <member name="F:NUnit.Framework.MessageMatch.StartsWith">
             Expect a message that starts with the parameter string
-        </member>
-        <member name="T:NUnit.Framework.ExpectedExceptionAttribute">
+        </member>
+        <member name="T:NUnit.Framework.ExpectedExceptionAttribute">
             <summary>
             ExpectedExceptionAttribute
             </summary>
             
-        </member>
-        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor">
             <summary>
             Constructor for a non-specific exception
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.Type)">
+        </member>
+        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.Type)">
             <summary>
             Constructor for a given type of exception
             </summary>
             <param name="exceptionType">The type of the expected exception</param>
-        </member>
-        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.String)">
             <summary>
             Constructor for a given exception name
             </summary>
             <param name="exceptionName">The full name of the expected exception</param>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedException">
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedException">
             <summary>
             Gets or sets the expected exception type
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedExceptionName">
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedExceptionName">
             <summary>
             Gets or sets the full Type name of the expected exception
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedMessage">
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedMessage">
             <summary>
             Gets or sets the expected message text
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.UserMessage">
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.UserMessage">
             <summary>
             Gets or sets the user message displayed in case of failure
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.MatchType">
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.MatchType">
             <summary>
              Gets or sets the type of match to be performed on the expected message
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.Handler">
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.Handler">
             <summary>
              Gets the name of a method to be used as an exception handler
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.ExplicitAttribute">
+        </member>
+        <member name="T:NUnit.Framework.ExplicitAttribute">
             <summary>
             ExplicitAttribute marks a test or test fixture so that it will
             only be run if explicitly executed from the gui or command line
             or if it is included by use of a filter. The test will not be
             run simply because an enclosing suite is run.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.ExplicitAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.ExplicitAttribute.#ctor">
             <summary>
             Default constructor
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.ExplicitAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.ExplicitAttribute.#ctor(System.String)">
             <summary>
             Constructor with a reason
             </summary>
             <param name="reason">The reason test is marked explicit</param>
-        </member>
-        <member name="P:NUnit.Framework.ExplicitAttribute.Reason">
+        </member>
+        <member name="P:NUnit.Framework.ExplicitAttribute.Reason">
             <summary>
             The reason test is marked explicit
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.IgnoreAttribute">
+        </member>
+        <member name="T:NUnit.Framework.IgnoreAttribute">
             <summary>
             Attribute used to mark a test that is to be ignored.
             Ignored tests result in a warning message when the
             tests are run.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.IgnoreAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.IgnoreAttribute.#ctor">
             <summary>
             Constructs the attribute without giving a reason 
             for ignoring the test.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.IgnoreAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.IgnoreAttribute.#ctor(System.String)">
             <summary>
             Constructs the attribute giving a reason for ignoring the test
             </summary>
             <param name="reason">The reason for ignoring the test</param>
-        </member>
-        <member name="P:NUnit.Framework.IgnoreAttribute.Reason">
+        </member>
+        <member name="P:NUnit.Framework.IgnoreAttribute.Reason">
             <summary>
             The reason for ignoring a test
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.IncludeExcludeAttribute">
+        </member>
+        <member name="T:NUnit.Framework.IncludeExcludeAttribute">
             <summary>
             Abstract base for Attributes that are used to include tests
             in the test run based on environmental settings.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor">
             <summary>
             Constructor with no included items specified, for use
             with named property syntax.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor(System.String)">
             <summary>
             Constructor taking one or more included items
             </summary>
             <param name="include">Comma-delimited list of included items</param>
-        </member>
-        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Include">
+        </member>
+        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Include">
             <summary>
             Name of the item that is needed in order for
             a test to run. Multiple itemss may be given,
             separated by a comma.
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Exclude">
+        </member>
+        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Exclude">
             <summary>
             Name of the item to be excluded. Multiple items
             may be given, separated by a comma.
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Reason">
+        </member>
+        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Reason">
             <summary>
             The reason for including or excluding the test
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.PlatformAttribute">
+        </member>
+        <member name="T:NUnit.Framework.PlatformAttribute">
             <summary>
             PlatformAttribute is used to mark a test fixture or an
             individual method as applying to a particular platform only.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.PlatformAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.PlatformAttribute.#ctor">
             <summary>
             Constructor with no platforms specified, for use
             with named property syntax.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.PlatformAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.PlatformAttribute.#ctor(System.String)">
             <summary>
             Constructor taking one or more platforms
             </summary>
             <param name="platforms">Comma-deliminted list of platforms</param>
-        </member>
-        <member name="T:NUnit.Framework.CultureAttribute">
+        </member>
+        <member name="T:NUnit.Framework.CultureAttribute">
             <summary>
             CultureAttribute is used to mark a test fixture or an
             individual method as applying to a particular Culture only.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.CultureAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.CultureAttribute.#ctor">
             <summary>
             Constructor with no cultures specified, for use
             with named property syntax.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.CultureAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.CultureAttribute.#ctor(System.String)">
             <summary>
             Constructor taking one or more cultures
             </summary>
             <param name="cultures">Comma-deliminted list of cultures</param>
-        </member>
-        <member name="T:NUnit.Framework.CombinatorialAttribute">
+        </member>
+        <member name="T:NUnit.Framework.CombinatorialAttribute">
             <summary>
             Marks a test to use a combinatorial join of any argument data 
             provided. NUnit will create a test case for every combination of 
@@ -266,40 +266,40 @@
             cases and so should be used judiciously. This is the default join
             type, so the attribute need not be used except as documentation.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.PropertyAttribute">
+        </member>
+        <member name="T:NUnit.Framework.PropertyAttribute">
             <summary>
             PropertyAttribute is used to attach information to a test as a name/value pair..
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.String)">
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.String)">
             <summary>
             Construct a PropertyAttribute with a name and string value
             </summary>
             <param name="propertyName">The name of the property</param>
             <param name="propertyValue">The property value</param>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Int32)">
             <summary>
             Construct a PropertyAttribute with a name and int value
             </summary>
             <param name="propertyName">The name of the property</param>
             <param name="propertyValue">The property value</param>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Double)">
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Double)">
             <summary>
             Construct a PropertyAttribute with a name and double value
             </summary>
             <param name="propertyName">The name of the property</param>
             <param name="propertyValue">The property value</param>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor">
             <summary>
             Constructor for derived classes that set the
             property dictionary directly.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.Object)">
             <summary>
             Constructor for use by derived classes that use the
             name of the type as the property name. Derived classes
@@ -308,31 +308,31 @@
             types will cause a serialization Exception when
             in the client.
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.PropertyAttribute.Properties">
+        </member>
+        <member name="P:NUnit.Framework.PropertyAttribute.Properties">
             <summary>
             Gets the property dictionary for this attribute
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.CombinatorialAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.CombinatorialAttribute.#ctor">
             <summary>
             Default constructor
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.PairwiseAttribute">
+        </member>
+        <member name="T:NUnit.Framework.PairwiseAttribute">
             <summary>
             Marks a test to use pairwise join of any argument data provided. 
             NUnit will attempt too excercise every pair of argument values at 
             least once, using as small a number of test cases as it can. With
             only two arguments, this is the same as a combinatorial join.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.PairwiseAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.PairwiseAttribute.#ctor">
             <summary>
             Default constructor
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.SequentialAttribute">
+        </member>
+        <member name="T:NUnit.Framework.SequentialAttribute">
             <summary>
             Marks a test to use a sequential join of any argument data
             provided. NUnit will use arguements for each parameter in
@@ -341,47 +341,47 @@
             for which it runs out of values. Normally, this should be
             used with the same number of arguments for each parameter.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.SequentialAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.SequentialAttribute.#ctor">
             <summary>
             Default constructor
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.MaxTimeAttribute">
+        </member>
+        <member name="T:NUnit.Framework.MaxTimeAttribute">
             <summary>
             Summary description for MaxTimeAttribute.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.MaxTimeAttribute.#ctor(System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.MaxTimeAttribute.#ctor(System.Int32)">
             <summary>
             Construct a MaxTimeAttribute, given a time in milliseconds.
             </summary>
             <param name="milliseconds">The maximum elapsed time in milliseconds</param>
-        </member>
-        <member name="T:NUnit.Framework.RandomAttribute">
+        </member>
+        <member name="T:NUnit.Framework.RandomAttribute">
             <summary>
             RandomAttribute is used to supply a set of random values
             to a single parameter of a parameterized test.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.ValuesAttribute">
+        </member>
+        <member name="T:NUnit.Framework.ValuesAttribute">
             <summary>
             ValuesAttribute is used to provide literal arguments for
             an individual parameter of a test.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.ParameterDataAttribute">
+        </member>
+        <member name="T:NUnit.Framework.ParameterDataAttribute">
             <summary>
             Abstract base class for attributes that apply to parameters 
             and supply data for the parameter.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.ParameterDataAttribute.GetData(System.Reflection.ParameterInfo)">
+        </member>
+        <member name="M:NUnit.Framework.ParameterDataAttribute.GetData(System.Reflection.ParameterInfo)">
             <summary>
             Gets the data to be provided to the specified parameter
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.ValuesAttribute.data">
+        </member>
+        <member name="F:NUnit.Framework.ValuesAttribute.data">
             <summary>
             The collection of data to be returned. Must
             be set by any derived attribute classes.
@@ -389,226 +389,226 @@
             elements may have their type changed in GetData
             if necessary.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object)">
             <summary>
             Construct with one argument
             </summary>
             <param name="arg1"></param>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object)">
             <summary>
             Construct with two arguments
             </summary>
             <param name="arg1"></param>
             <param name="arg2"></param>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object,System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object,System.Object)">
             <summary>
             Construct with three arguments
             </summary>
             <param name="arg1"></param>
             <param name="arg2"></param>
             <param name="arg3"></param>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object[])">
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object[])">
             <summary>
             Construct with an array of arguments
             </summary>
             <param name="args"></param>
-        </member>
-        <member name="M:NUnit.Framework.ValuesAttribute.GetData(System.Reflection.ParameterInfo)">
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.GetData(System.Reflection.ParameterInfo)">
             <summary>
             Get the collection of values to be used as arguments
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32)">
             <summary>
             Construct a set of doubles from 0.0 to 1.0,
             specifying only the count.
             </summary>
             <param name="count"></param>
-        </member>
-        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Double,System.Double,System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Double,System.Double,System.Int32)">
             <summary>
             Construct a set of doubles from min to max
             </summary>
             <param name="min"></param>
             <param name="max"></param>
             <param name="count"></param>
-        </member>
-        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
             <summary>
             Construct a set of ints from min to max
             </summary>
             <param name="min"></param>
             <param name="max"></param>
             <param name="count"></param>
-        </member>
-        <member name="M:NUnit.Framework.RandomAttribute.GetData(System.Reflection.ParameterInfo)">
+        </member>
+        <member name="M:NUnit.Framework.RandomAttribute.GetData(System.Reflection.ParameterInfo)">
             <summary>
             Get the collection of values to be used as arguments
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.RangeAttribute">
+        </member>
+        <member name="T:NUnit.Framework.RangeAttribute">
             <summary>
             RangeAttribute is used to supply a range of values to an
             individual parameter of a parameterized test.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32)">
             <summary>
             Construct a range of ints using default step of 1
             </summary>
             <param name="from"></param>
             <param name="to"></param>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
             <summary>
             Construct a range of ints specifying the step size 
             </summary>
             <param name="from"></param>
             <param name="to"></param>
             <param name="step"></param>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int64,System.Int64,System.Int64)">
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int64,System.Int64,System.Int64)">
             <summary>
             Construct a range of longs
             </summary>
             <param name="from"></param>
             <param name="to"></param>
             <param name="step"></param>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Double,System.Double,System.Double)">
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Double,System.Double,System.Double)">
             <summary>
             Construct a range of doubles
             </summary>
             <param name="from"></param>
             <param name="to"></param>
             <param name="step"></param>
-        </member>
-        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Single,System.Single,System.Single)">
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Single,System.Single,System.Single)">
             <summary>
             Construct a range of floats
             </summary>
             <param name="from"></param>
             <param name="to"></param>
             <param name="step"></param>
-        </member>
-        <member name="T:NUnit.Framework.RepeatAttribute">
+        </member>
+        <member name="T:NUnit.Framework.RepeatAttribute">
             <summary>
             RepeatAttribute may be applied to test case in order
             to run it multiple times.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.RepeatAttribute.#ctor(System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.RepeatAttribute.#ctor(System.Int32)">
             <summary>
             Construct a RepeatAttribute
             </summary>
             <param name="count">The number of times to run the test</param>
-        </member>
-        <member name="T:NUnit.Framework.RequiredAddinAttribute">
+        </member>
+        <member name="T:NUnit.Framework.RequiredAddinAttribute">
             <summary>
             RequiredAddinAttribute may be used to indicate the names of any addins
             that must be present in order to run some or all of the tests in an
             assembly. If the addin is not loaded, the entire assembly is marked
             as NotRunnable.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiredAddinAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.RequiredAddinAttribute.#ctor(System.String)">
             <summary>
             Initializes a new instance of the <see cref="T:RequiredAddinAttribute"/> class.
             </summary>
             <param name="requiredAddin">The required addin.</param>
-        </member>
-        <member name="P:NUnit.Framework.RequiredAddinAttribute.RequiredAddin">
+        </member>
+        <member name="P:NUnit.Framework.RequiredAddinAttribute.RequiredAddin">
             <summary>
             Gets the name of required addin.
             </summary>
             <value>The required addin name.</value>
-        </member>
-        <member name="T:NUnit.Framework.SetCultureAttribute">
+        </member>
+        <member name="T:NUnit.Framework.SetCultureAttribute">
             <summary>
             Summary description for SetCultureAttribute.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.SetCultureAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.SetCultureAttribute.#ctor(System.String)">
             <summary>
             Construct given the name of a culture
             </summary>
             <param name="culture"></param>
-        </member>
-        <member name="T:NUnit.Framework.SetUICultureAttribute">
+        </member>
+        <member name="T:NUnit.Framework.SetUICultureAttribute">
             <summary>
             Summary description for SetUICultureAttribute.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.SetUICultureAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.SetUICultureAttribute.#ctor(System.String)">
             <summary>
             Construct given the name of a culture
             </summary>
             <param name="culture"></param>
-        </member>
-        <member name="T:NUnit.Framework.SetUpAttribute">
+        </member>
+        <member name="T:NUnit.Framework.SetUpAttribute">
             <summary>
             Attribute used to mark a class that contains one-time SetUp 
             and/or TearDown methods that apply to all the tests in a
             namespace or an assembly.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.SetUpFixtureAttribute">
+        </member>
+        <member name="T:NUnit.Framework.SetUpFixtureAttribute">
             <summary>
             SetUpFixtureAttribute is used to identify a SetUpFixture
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.SuiteAttribute">
+        </member>
+        <member name="T:NUnit.Framework.SuiteAttribute">
             <summary>
             Attribute used to mark a static (shared in VB) property
             that returns a list of tests.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.TearDownAttribute">
+        </member>
+        <member name="T:NUnit.Framework.TearDownAttribute">
             <summary>
             Attribute used to identify a method that is called 
             immediately after each test is run. The method is 
             guaranteed to be called, even if an exception is thrown.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestAttribute">
-            <summary>
-            Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/> 
-            class makes the method callable from the NUnit test runner. There is a property 
-            called Description which is optional which you can provide a more detailed test
-            description. This class cannot be inherited.
-            </summary>
-            
-            <example>
-            [TestFixture]
-            public class Fixture
-            {
-              [Test]
-              public void MethodToTest()
-              {}
-              
-              [Test(Description = "more detailed description")]
-              publc void TestDescriptionMethod()
-              {}
-            }
-            </example>
-            
-        </member>
-        <member name="P:NUnit.Framework.TestAttribute.Description">
+        </member>
+        <member name="T:NUnit.Framework.TestAttribute">
+            <summary>
+            Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/> 
+            class makes the method callable from the NUnit test runner. There is a property 
+            called Description which is optional which you can provide a more detailed test
+            description. This class cannot be inherited.
+            </summary>
+            
+            <example>
+            [TestFixture]
+            public class Fixture
+            {
+              [Test]
+              public void MethodToTest()
+              {}
+              
+              [Test(Description = "more detailed description")]
+              publc void TestDescriptionMethod()
+              {}
+            }
+            </example>
+            
+        </member>
+        <member name="P:NUnit.Framework.TestAttribute.Description">
             <summary>
             Descriptive text for this test
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestCaseAttribute">
+        </member>
+        <member name="T:NUnit.Framework.TestCaseAttribute">
             <summary>
             TestCaseAttribute is used to mark parameterized test cases
             and provide them with their arguments.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.ITestCaseData">
+        </member>
+        <member name="T:NUnit.Framework.ITestCaseData">
             <summary>
             The ITestCaseData interface is implemented by a class
             that is able to return complete testcases for use by
@@ -621,263 +621,263 @@
             the core is able to reflect successfully over the
             framework implementations of ITestCaseData.
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Arguments">
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.Arguments">
             <summary>
             Gets the argument list to be provided to the test
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Result">
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.Result">
             <summary>
             Gets the expected result
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.ExpectedException">
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.ExpectedException">
             <summary>
              Gets the expected exception Type
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.ExpectedExceptionName">
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.ExpectedExceptionName">
             <summary>
             Gets the FullName of the expected exception
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.TestName">
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.TestName">
             <summary>
             Gets the name to be used for the test
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Description">
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.Description">
             <summary>
             Gets the description of the test
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.Ignored">
-            <summary>
-            Gets a value indicating whether this <see cref="T:NUnit.Framework.ITestCaseData"/> is ignored.
-            </summary>
-            <value><c>true</c> if ignored; otherwise, <c>false</c>.</value>
-        </member>
-        <member name="P:NUnit.Framework.ITestCaseData.IgnoreReason">
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.Ignored">
+            <summary>
+            Gets a value indicating whether this <see cref="T:NUnit.Framework.ITestCaseData"/> is ignored.
+            </summary>
+            <value><c>true</c> if ignored; otherwise, <c>false</c>.</value>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.IgnoreReason">
             <summary>
             Gets the ignore reason.
             </summary>
             <value>The ignore reason.</value>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object[])">
+        </member>
+        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object[])">
             <summary>
             Construct a TestCaseAttribute with a list of arguments.
             This constructor is not CLS-Compliant
             </summary>
             <param name="arguments"></param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object)">
             <summary>
             Construct a TestCaseAttribute with a single argument
             </summary>
             <param name="arg"></param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object)">
             <summary>
             Construct a TestCaseAttribute with a two arguments
             </summary>
             <param name="arg1"></param>
             <param name="arg2"></param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object,System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object,System.Object)">
             <summary>
             Construct a TestCaseAttribute with a three arguments
             </summary>
             <param name="arg1"></param>
             <param name="arg2"></param>
             <param name="arg3"></param>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Arguments">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Arguments">
             <summary>
             Gets the list of arguments to a test case
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Result">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Result">
             <summary>
             Gets or sets the expected result.
             </summary>
             <value>The result.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedException">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedException">
             <summary>
             Gets or sets the expected exception.
             </summary>
             <value>The expected exception.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedExceptionName">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedExceptionName">
             <summary>
             Gets or sets the name the expected exception.
             </summary>
             <value>The expected name of the exception.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedMessage">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedMessage">
             <summary>
             Gets or sets the expected message of the expected exception
             </summary>
             <value>The expected message of the exception.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.MatchType">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.MatchType">
             <summary>
              Gets or sets the type of match to be performed on the expected message
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Description">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Description">
             <summary>
             Gets or sets the description.
             </summary>
             <value>The description.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.TestName">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.TestName">
             <summary>
             Gets or sets the name of the test.
             </summary>
             <value>The name of the test.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Ignore">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Ignore">
             <summary>
             Gets or sets the ignored status of the test
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.Ignored">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Ignored">
             <summary>
             Gets or sets the ignored status of the test
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseAttribute.IgnoreReason">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.IgnoreReason">
             <summary>
             Gets the ignore reason.
             </summary>
             <value>The ignore reason.</value>
-        </member>
-        <member name="T:NUnit.Framework.TestCaseSourceAttribute">
+        </member>
+        <member name="T:NUnit.Framework.TestCaseSourceAttribute">
             <summary>
             FactoryAttribute indicates the source to be used to
             provide test cases for a test method.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.String)">
             <summary>
             Construct with the name of the factory - for use with languages
             that don't support params arrays.
             </summary>
             <param name="sourceName">An array of the names of the factories that will provide data</param>
-        </member>
-        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.Type,System.String)">
+        </member>
+        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.Type,System.String)">
             <summary>
             Construct with a Type and name - for use with languages
             that don't support params arrays.
             </summary>
             <param name="sourceType">The Type that will provide data</param>
             <param name="sourceName">The name of the method, property or field that will provide data</param>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceName">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceName">
             <summary>
             The name of a the method, property or fiend to be used as a source
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceType">
+        </member>
+        <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceType">
             <summary>
             A Type to be used as a source
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestFixtureAttribute">
+        </member>
+        <member name="T:NUnit.Framework.TestFixtureAttribute">
             <example>
             [TestFixture]
             public class ExampleClass 
             {}
             </example>
-        </member>
-        <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor">
             <summary>
             Default constructor
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor(System.Object[])">
+        </member>
+        <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor(System.Object[])">
             <summary>
             Construct with a object[] representing a set of arguments. 
             In .NET 2.0, the arguments may later be separated into
             type arguments and constructor arguments.
             </summary>
             <param name="arguments"></param>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.Description">
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.Description">
             <summary>
             Descriptive text for this fixture
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.Arguments">
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.Arguments">
             <summary>
             The arguments originally provided to the attribute
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.Ignore">
-            <summary>
-            Gets or sets a value indicating whether this <see cref="T:NUnit.Framework.TestFixtureAttribute"/> should be ignored.
-            </summary>
-            <value><c>true</c> if ignore; otherwise, <c>false</c>.</value>
-        </member>
-        <member name="P:NUnit.Framework.TestFixtureAttribute.IgnoreReason">
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.Ignore">
+            <summary>
+            Gets or sets a value indicating whether this <see cref="T:NUnit.Framework.TestFixtureAttribute"/> should be ignored.
+            </summary>
+            <value><c>true</c> if ignore; otherwise, <c>false</c>.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.IgnoreReason">
             <summary>
             Gets or sets the ignore reason. May set Ignored as a side effect.
             </summary>
             <value>The ignore reason.</value>
-        </member>
-        <member name="T:NUnit.Framework.TestFixtureSetUpAttribute">
+        </member>
+        <member name="T:NUnit.Framework.TestFixtureSetUpAttribute">
             <summary>
             Attribute used to identify a method that is 
             called before any tests in a fixture are run.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.TestFixtureTearDownAttribute">
+        </member>
+        <member name="T:NUnit.Framework.TestFixtureTearDownAttribute">
             <summary>
             Attribute used to identify a method that is called after
             all the tests in a fixture have run. The method is 
             guaranteed to be called, even if an exception is thrown.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.TheoryAttribute">
-            <summary>
-            Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/> 
-            class makes the method callable from the NUnit test runner. There is a property 
-            called Description which is optional which you can provide a more detailed test
-            description. This class cannot be inherited.
-            </summary>
-            
-            <example>
-            [TestFixture]
-            public class Fixture
-            {
-              [Test]
-              public void MethodToTest()
-              {}
-              
-              [Test(Description = "more detailed description")]
-              publc void TestDescriptionMethod()
-              {}
-            }
-            </example>
-            
-        </member>
-        <member name="T:NUnit.Framework.TimeoutAttribute">
+        </member>
+        <member name="T:NUnit.Framework.TheoryAttribute">
+            <summary>
+            Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/> 
+            class makes the method callable from the NUnit test runner. There is a property 
+            called Description which is optional which you can provide a more detailed test
+            description. This class cannot be inherited.
+            </summary>
+            
+            <example>
+            [TestFixture]
+            public class Fixture
+            {
+              [Test]
+              public void MethodToTest()
+              {}
+              
+              [Test(Description = "more detailed description")]
+              publc void TestDescriptionMethod()
+              {}
+            }
+            </example>
+            
+        </member>
+        <member name="T:NUnit.Framework.TimeoutAttribute">
             <summary>
             WUsed on a method, marks the test with a timeout value in milliseconds. 
             The test will be run in a separate thread and is cancelled if the timeout 
             is exceeded. Used on a method or assembly, sets the default timeout 
             for all contained test methods.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.TimeoutAttribute.#ctor(System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.TimeoutAttribute.#ctor(System.Int32)">
             <summary>
             Construct a TimeoutAttribute given a time in milliseconds
             </summary>
             <param name="timeout">The timeout value in milliseconds</param>
-        </member>
-        <member name="T:NUnit.Framework.RequiresSTAAttribute">
+        </member>
+        <member name="T:NUnit.Framework.RequiresSTAAttribute">
             <summary>
             Marks a test that must run in the STA, causing it
             to run in a separate thread if necessary.
@@ -885,13 +885,13 @@
             On methods, you may also use STAThreadAttribute
             to serve the same purpose.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiresSTAAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.RequiresSTAAttribute.#ctor">
             <summary>
             Construct a RequiresSTAAttribute
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.RequiresMTAAttribute">
+        </member>
+        <member name="T:NUnit.Framework.RequiresMTAAttribute">
             <summary>
             Marks a test that must run in the MTA, causing it
             to run in a separate thread if necessary.
@@ -899,130 +899,130 @@
             On methods, you may also use MTAThreadAttribute
             to serve the same purpose.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiresMTAAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.RequiresMTAAttribute.#ctor">
             <summary>
             Construct a RequiresMTAAttribute
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.RequiresThreadAttribute">
+        </member>
+        <member name="T:NUnit.Framework.RequiresThreadAttribute">
             <summary>
             Marks a test that must run on a separate thread.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor">
             <summary>
             Construct a RequiresThreadAttribute
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor(System.Threading.ApartmentState)">
+        </member>
+        <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor(System.Threading.ApartmentState)">
             <summary>
             Construct a RequiresThreadAttribute, specifying the apartment
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.ValueSourceAttribute">
+        </member>
+        <member name="T:NUnit.Framework.ValueSourceAttribute">
             <summary>
             ValueSourceAttribute indicates the source to be used to
             provide data for one parameter of a test method.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.String)">
+        </member>
+        <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.String)">
             <summary>
             Construct with the name of the factory - for use with languages
             that don't support params arrays.
             </summary>
             <param name="sourceName">The name of the data source to be used</param>
-        </member>
-        <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.Type,System.String)">
+        </member>
+        <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.Type,System.String)">
             <summary>
             Construct with a Type and name - for use with languages
             that don't support params arrays.
             </summary>
             <param name="sourceType">The Type that will provide data</param>
             <param name="sourceName">The name of the method, property or field that will provide data</param>
-        </member>
-        <member name="P:NUnit.Framework.ValueSourceAttribute.SourceName">
+        </member>
+        <member name="P:NUnit.Framework.ValueSourceAttribute.SourceName">
             <summary>
             The name of a the method, property or fiend to be used as a source
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.ValueSourceAttribute.SourceType">
+        </member>
+        <member name="P:NUnit.Framework.ValueSourceAttribute.SourceType">
             <summary>
             A Type to be used as a source
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.AttributeExistsConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.AttributeExistsConstraint">
             <summary>
             AttributeExistsConstraint tests for the presence of a
             specified attribute on  a Type.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.Constraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.Constraint">
             <summary>
             The Constraint class is the base of all built-in constraints
             within NUnit. It provides the operator overloads used to combine 
             constraints.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.IResolveConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.IResolveConstraint">
             <summary>
             The IConstraintExpression interface is implemented by all
             complete and resolvable constraints and expressions.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.IResolveConstraint.Resolve">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.IResolveConstraint.Resolve">
             <summary>
             Return the top-level constraint for this expression
             </summary>
             <returns></returns>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.UNSET">
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.UNSET">
             <summary>
             Static UnsetObject used to detect derived constraints
             failing to set the actual value.
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.actual">
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.actual">
             <summary>
             The actual value being tested against a constraint
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.displayName">
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.displayName">
             <summary>
             The display name of this Constraint for use by ToString()
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.argcnt">
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.argcnt">
             <summary>
             Argument fields used by ToString();
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.Constraint.builder">
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.builder">
             <summary>
             The builder holding this constraint
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor">
             <summary>
             Construct a constraint with no arguments
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object)">
             <summary>
             Construct a constraint with one argument
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object,System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object,System.Object)">
             <summary>
             Construct a constraint with two arguments
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.SetBuilder(NUnit.Framework.Constraints.ConstraintBuilder)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.SetBuilder(NUnit.Framework.Constraints.ConstraintBuilder)">
             <summary>
             Sets the ConstraintBuilder holding this constraint
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.WriteMessageTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.WriteMessageTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Write the failure message to the MessageWriter provided
             as an argument. The default implementation simply passes
@@ -1033,15 +1033,15 @@
             such as where the error occured can override this.
             </summary>
             <param name="writer">The MessageWriter on which to display the message</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(System.Object)">
             <summary>
             Test whether the constraint is satisfied by a given value
             </summary>
             <param name="actual">The value to be tested</param>
             <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(NUnit.Framework.Constraints.ActualValueDelegate)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(NUnit.Framework.Constraints.ActualValueDelegate)">
             <summary>
             Test whether the constraint is satisfied by an
             ActualValueDelegate that returns the value to be tested.
@@ -1051,8 +1051,8 @@
             </summary>
             <param name="del">An ActualValueDelegate</param>
             <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(System.Boolean@)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(System.Boolean@)">
             <summary>
             Test whether the constraint is satisfied by a given bool reference.
             The default implementation simply dereferences the value but
@@ -1060,14 +1060,14 @@
             </summary>
             <param name="actual">A reference to the value to be tested</param>
             <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Write the constraint description to a MessageWriter
             </summary>
             <param name="writer">The writer on which the description is displayed</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Write the actual value for a failing constraint test to a
             MessageWriter. The default implementation simply writes
@@ -1075,45 +1075,45 @@
             perform any formatting.
             </summary>
             <param name="writer">The writer on which the actual value is displayed</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.ToString">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.ToString">
             <summary>
             Default override of ToString returns the constraint DisplayName
             followed by any arguments within angle brackets.
             </summary>
             <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.GetStringRepresentation">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.GetStringRepresentation">
             <summary>
             Returns the string representation of this constraint
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseAnd(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseAnd(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
             <summary>
             This operator creates a constraint that is satisfied only if both 
             argument constraints are satisfied.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseOr(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseOr(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
             <summary>
             This operator creates a constraint that is satisfied if either 
             of the argument constraints is satisfied.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.op_LogicalNot(NUnit.Framework.Constraints.Constraint)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.op_LogicalNot(NUnit.Framework.Constraints.Constraint)">
             <summary>
             This operator creates a constraint that is satisfied if the 
             argument constraint is not satisfied.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32)">
             <summary>
             Returns a DelayedConstraint with the specified delay time.
             </summary>
             <param name="delayInMilliseconds">The delay in milliseconds.</param>
             <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32,System.Int32)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32,System.Int32)">
             <summary>
             Returns a DelayedConstraint with the specified delay time
             and polling interval.
@@ -1121,235 +1121,235 @@
             <param name="delayInMilliseconds">The delay in milliseconds.</param>
             <param name="pollingInterval">The interval at which to test the constraint.</param>
             <returns></returns>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.Constraint.DisplayName">
+        </member>
+        <member name="P:NUnit.Framework.Constraints.Constraint.DisplayName">
             <summary>
             The display name of this Constraint for use by ToString().
             The default value is the name of the constraint with
             trailing "Constraint" removed. Derived classes may set
             this to another name in their constructors.
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.Constraint.And">
+        </member>
+        <member name="P:NUnit.Framework.Constraints.Constraint.And">
             <summary>
             Returns a ConstraintExpression by appending And
             to the current constraint.
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.Constraint.With">
+        </member>
+        <member name="P:NUnit.Framework.Constraints.Constraint.With">
             <summary>
             Returns a ConstraintExpression by appending And
             to the current constraint.
             </summary>
-        </member>
-        <member name="P:NUnit.Framework.Constraints.Constraint.Or">
+        </member>
+        <member name="P:NUnit.Framework.Constraints.Constraint.Or">
             <summary>
             Returns a ConstraintExpression by appending Or
             to the current constraint.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.Constraint.UnsetObject">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.Constraint.UnsetObject">
             <summary>
             Class used to detect any derived constraints
             that fail to set the actual value in their
             Matches override.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.#ctor(System.Type)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.#ctor(System.Type)">
             <summary>
             Constructs an AttributeExistsConstraint for a specific attribute Type
             </summary>
             <param name="type"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.Matches(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.Matches(System.Object)">
             <summary>
             Tests whether the object provides the expected attribute.
             </summary>
             <param name="actual">A Type, MethodInfo, or other ICustomAttributeProvider</param>
             <returns>True if the expected attribute is present, otherwise false</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Writes the description of the constraint to the specified writer
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.AttributeConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.AttributeConstraint">
             <summary>
             AttributeConstraint tests that a specified attribute is present
             on a Type or other provider and that the value of the attribute
             satisfies some other constraint.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.PrefixConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.PrefixConstraint">
             <summary>
             Abstract base class used for prefixes
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.PrefixConstraint.baseConstraint">
+        </member>
+        <member name="F:NUnit.Framework.Constraints.PrefixConstraint.baseConstraint">
             <summary>
             The base constraint
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.PrefixConstraint.#ctor(NUnit.Framework.Constraints.IResolveConstraint)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.PrefixConstraint.#ctor(NUnit.Framework.Constraints.IResolveConstraint)">
             <summary>
             Construct given a base constraint
             </summary>
             <param name="resolvable"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.#ctor(System.Type,NUnit.Framework.Constraints.Constraint)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.#ctor(System.Type,NUnit.Framework.Constraints.Constraint)">
             <summary>
             Constructs an AttributeConstraint for a specified attriute
             Type and base constraint.
             </summary>
             <param name="type"></param>
             <param name="baseConstraint"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.Matches(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.Matches(System.Object)">
             <summary>
             Determines whether the Type or other provider has the 
             expected attribute and if its value matches the
             additional constraint specified.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Writes a description of the attribute to the specified writer.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Writes the actual value supplied to the specified writer.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.GetStringRepresentation">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.GetStringRepresentation">
             <summary>
             Returns a string representation of the constraint.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.BasicConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.BasicConstraint">
             <summary>
             BasicConstraint is the abstract base for constraints that
             perform a simple comparison to a constant value.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.BasicConstraint.#ctor(System.Object,System.String)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.BasicConstraint.#ctor(System.Object,System.String)">
             <summary>
             Initializes a new instance of the <see cref="T:BasicConstraint"/> class.
             </summary>
             <param name="expected">The expected.</param>
             <param name="description">The description.</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.BasicConstraint.Matches(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.BasicConstraint.Matches(System.Object)">
             <summary>
             Test whether the constraint is satisfied by a given value
             </summary>
             <param name="actual">The value to be tested</param>
             <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.BasicConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.BasicConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Write the constraint description to a MessageWriter
             </summary>
             <param name="writer">The writer on which the description is displayed</param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.NullConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.NullConstraint">
             <summary>
             NullConstraint tests that the actual value is null
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.NullConstraint.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.NullConstraint.#ctor">
             <summary>
             Initializes a new instance of the <see cref="T:NullConstraint"/> class.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.TrueConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.TrueConstraint">
             <summary>
             TrueConstraint tests that the actual value is true
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.TrueConstraint.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.TrueConstraint.#ctor">
             <summary>
             Initializes a new instance of the <see cref="T:TrueConstraint"/> class.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.FalseConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.FalseConstraint">
             <summary>
             FalseConstraint tests that the actual value is false
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.FalseConstraint.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.FalseConstraint.#ctor">
             <summary>
             Initializes a new instance of the <see cref="T:FalseConstraint"/> class.
             </summary>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.NaNConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.NaNConstraint">
             <summary>
             NaNConstraint tests that the actual value is a double or float NaN
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.NaNConstraint.Matches(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.NaNConstraint.Matches(System.Object)">
             <summary>
             Test that the actual value is an NaN
             </summary>
             <param name="actual"></param>
             <returns></returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.NaNConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.NaNConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Write the constraint description to a specified writer
             </summary>
             <param name="writer"></param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.BinaryConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.BinaryConstraint">
             <summary>
             BinaryConstraint is the abstract base of all constraints
             that combine two other constraints in some fashion.
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.BinaryConstraint.left">
+        </member>
+        <member name="F:NUnit.Framework.Constraints.BinaryConstraint.left">
             <summary>
             The first constraint being combined
             </summary>
-        </member>
-        <member name="F:NUnit.Framework.Constraints.BinaryConstraint.right">
+        </member>
+        <member name="F:NUnit.Framework.Constraints.BinaryConstraint.right">
             <summary>
             The second constraint being combined
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.BinaryConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.BinaryConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
             <summary>
             Construct a BinaryConstraint from two other constraints
             </summary>
             <param name="left">The first constraint</param>
             <param name="right">The second constraint</param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.AndConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.AndConstraint">
             <summary>
             AndConstraint succeeds only if both members succeed.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AndConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AndConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
             <summary>
             Create an AndConstraint from two other constraints
             </summary>
             <param name="left">The first constraint</param>
             <param name="right">The second constraint</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AndConstraint.Matches(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AndConstraint.Matches(System.Object)">
             <summary>
             Apply both member constraints to an actual value, succeeding 
             succeeding only if both of them succeed.
             </summary>
             <param name="actual">The actual value</param>
             <returns>True if the constraints both succeeded</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Write a description for this contraint to a MessageWriter
             </summary>
             <param name="writer">The MessageWriter to receive the description</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Write the actual value for a failing constraint test to a
             MessageWriter. The default implementation simply writes
@@ -1357,51 +1357,51 @@
             perform any formatting.
             </summary>
             <param name="writer">The writer on which the actual value is displayed</param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.OrConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.OrConstraint">
             <summary>
             OrConstraint succeeds if either member succeeds
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.OrConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.OrConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
             <summary>
             Create an OrConstraint from two other constraints
             </summary>
             <param name="left">The first constraint</param>
             <param name="right">The second constraint</param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.OrConstraint.Matches(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.OrConstraint.Matches(System.Object)">
             <summary>
             Apply the member constraints to an actual value, succeeding 
             succeeding as soon as one of them succeeds.
             </summary>
             <param name="actual">The actual value</param>
             <returns>True if either constraint succeeded</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.OrConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.OrConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
             <summary>
             Write a description for this contraint to a MessageWriter
             </summary>
             <param name="writer">The MessageWriter to receive the description</param>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionConstraint">
             <summary>
             CollectionConstraint is the abstract base class for
             constraints that operate on collections.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor">
             <summary>
             Construct an empty CollectionConstraint
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor(System.Object)">
             <summary>
             Construct a CollectionConstraint
             </summary>
             <param name="arg"></param>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.IsEmpty(System.Collections.IEnumerable)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.IsEmpty(System.Collections.IEnumerable)">
             <summary>
             Determines whether the specified enumerable is empty.
             </summary>
@@ -1409,329 +1409,329 @@
             <returns>
             	<c>true</c> if the specified enumerable is empty; otherwise, <c>false</c>.
             </returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.Matches(System.Object)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.Matches(System.Object)">
             <summary>
             Test whether the constraint is satisfied by a given value
             </summary>
             <param name="actual">The value to be tested</param>
             <returns>True for success, false for failure</returns>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.doMatch(System.Collections.IEnumerable)">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.doMatch(System.Collections.IEnumerable)">
             <summary>
             Protected method to be implemented by derived classes
             </summary>
             <param name="collection"></param>
             <returns></returns>
-        </member>
-        <member name="T:NUnit.Framework.Constraints.CollectionItemsEqualConstraint">
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionItemsEqualConstraint">
             <summary>
             CollectionItemsEqualConstraint is the abstract base class for all
             collection constraints that apply some notion of item equality
             as a part of their operation.
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor">
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor">
             <summary>
             Construct an empty CollectionConstraint
             </summary>
-        </member>
-        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor(System.Object)">
+        </member>

[... 12581 lines stripped ...]


Mime
View raw message