lucene-solr-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From ehatc...@apache.org
Subject svn commit: r491827 [3/3] - in /incubator/solr/trunk/client/ruby/flare/solr: etc/ ext/ lib/ lib/jsp/ solr/ solr/bin/ solr/conf/ solr/conf/xslt/ solr/data/ solr/data/index/ webapps/
Date Tue, 02 Jan 2007 16:11:46 GMT
Added: incubator/solr/trunk/client/ruby/flare/solr/solr/conf/solrconfig.xml
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/conf/solrconfig.xml?view=auto&rev=491827
==============================================================================
--- incubator/solr/trunk/client/ruby/flare/solr/solr/conf/solrconfig.xml (added)
+++ incubator/solr/trunk/client/ruby/flare/solr/solr/conf/solrconfig.xml Tue Jan  2 08:11:42
2007
@@ -0,0 +1,277 @@
+<?xml version="1.0" ?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License.  You may obtain a copy of the License at
+
+     http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<config>
+
+  <!-- Used to specify an alternate directory to hold all index data
+       other than the default ./data under the Solr home.
+       If replication is in use, this should match the replication configuration. -->
+  <!--
+  <dataDir>./solr/data</dataDir>
+  -->
+
+  <indexDefaults>
+   <!-- Values here affect all index writers and act as a default unless overridden. -->
+    <useCompoundFile>false</useCompoundFile>
+    <mergeFactor>10</mergeFactor>
+    <maxBufferedDocs>1000</maxBufferedDocs>
+    <maxMergeDocs>2147483647</maxMergeDocs>
+    <maxFieldLength>10000</maxFieldLength>
+    <writeLockTimeout>1000</writeLockTimeout>
+    <commitLockTimeout>10000</commitLockTimeout>
+  </indexDefaults>
+
+  <mainIndex>
+    <!-- options specific to the main on-disk lucene index -->
+    <useCompoundFile>false</useCompoundFile>
+    <mergeFactor>10</mergeFactor>
+    <maxBufferedDocs>1000</maxBufferedDocs>
+    <maxMergeDocs>2147483647</maxMergeDocs>
+    <maxFieldLength>10000</maxFieldLength>
+
+    <!-- If true, unlock any held write or commit locks on startup. 
+         This defeats the locking mechanism that allows multiple
+         processes to safely access a lucene index, and should be
+         used with care. -->
+    <unlockOnStartup>false</unlockOnStartup>
+  </mainIndex>
+
+  <!-- the default high-performance update handler -->
+  <updateHandler class="solr.DirectUpdateHandler2">
+
+    <!-- A prefix of "solr." for class names is an alias that
+         causes solr to search appropriate packages, including
+         org.apache.solr.(search|update|request|core|analysis)
+     -->
+
+    <!-- autocommit pending docs if certain criteria are met 
+    <autoCommit> 
+      <maxDocs>10000</maxDocs>
+    </autoCommit>
+    -->
+
+    <!-- The RunExecutableListener executes an external command.
+         exe - the name of the executable to run
+         dir - dir to use as the current working directory. default="."
+         wait - the calling thread waits until the executable returns. default="true"
+         args - the arguments to pass to the program.  default=nothing
+         env - environment variables to set.  default=nothing
+      -->
+    <!-- A postCommit event is fired after every commit or optimize command
+    <listener event="postCommit" class="solr.RunExecutableListener">
+      <str name="exe">snapshooter</str>
+      <str name="dir">solr/bin</str>
+      <bool name="wait">true</bool>
+      <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
+      <arr name="env"> <str>MYVAR=val1</str> </arr>
+    </listener>
+    -->
+    <!-- A postOptimize event is fired only after every optimize command, useful
+         in conjunction with index distribution to only distribute optimized indicies 
+    <listener event="postOptimize" class="solr.RunExecutableListener">
+      <str name="exe">snapshooter</str>
+      <str name="dir">solr/bin</str>
+      <bool name="wait">true</bool>
+    </listener>
+    -->
+
+  </updateHandler>
+
+
+  <query>
+    <!-- Maximum number of clauses in a boolean query... can affect
+        range or prefix queries that expand to big boolean
+        queries.  An exception is thrown if exceeded.  -->
+    <maxBooleanClauses>1024</maxBooleanClauses>
+
+    
+    <!-- Cache used by SolrIndexSearcher for filters (DocSets),
+         unordered sets of *all* documents that match a query.
+         When a new searcher is opened, its caches may be prepopulated
+         or "autowarmed" using data from caches in the old searcher.
+         autowarmCount is the number of items to prepopulate.  For LRUCache,
+         the autowarmed items will be the most recently accessed items.
+       Parameters:
+         class - the SolrCache implementation (currently only LRUCache)
+         size - the maximum number of entries in the cache
+         initialSize - the initial capacity (number of entries) of
+           the cache.  (seel java.util.HashMap)
+         autowarmCount - the number of entries to prepopulate from
+           and old cache.
+         -->
+    <filterCache
+      class="solr.LRUCache"
+      size="512"
+      initialSize="512"
+      autowarmCount="256"/>
+
+   <!-- queryResultCache caches results of searches - ordered lists of
+         document ids (DocList) based on a query, a sort, and the range
+         of documents requested.  -->
+    <queryResultCache
+      class="solr.LRUCache"
+      size="512"
+      initialSize="512"
+      autowarmCount="256"/>
+
+  <!-- documentCache caches Lucene Document objects (the stored fields for each document).
+       Since Lucene internal document ids are transient, this cache will not be autowarmed.
 -->
+    <documentCache
+      class="solr.LRUCache"
+      size="512"
+      initialSize="512"
+      autowarmCount="0"/>
+
+    <!-- If true, stored fields that are not requested will be loaded lazily.
+    -->
+    <enableLazyFieldLoading>false</enableLazyFieldLoading>
+
+    <!-- Example of a generic cache.  These caches may be accessed by name
+         through SolrIndexSearcher.getCache(),cacheLookup(), and cacheInsert().
+         The purpose is to enable easy caching of user/application level data.
+         The regenerator argument should be specified as an implementation
+         of solr.search.CacheRegenerator if autowarming is desired.  -->
+    <!--
+    <cache name="myUserCache"
+      class="solr.LRUCache"
+      size="4096"
+      initialSize="1024"
+      autowarmCount="1024"
+      regenerator="org.mycompany.mypackage.MyRegenerator"
+      />
+    -->
+
+   <!-- An optimization that attempts to use a filter to satisfy a search.
+         If the requested sort does not include score, then the filterCache
+         will be checked for a filter matching the query. If found, the filter
+         will be used as the source of document ids, and then the sort will be
+         applied to that.
+    <useFilterForSortedQuery>true</useFilterForSortedQuery>
+   -->
+
+   <!-- An optimization for use with the queryResultCache.  When a search
+         is requested, a superset of the requested number of document ids
+         are collected.  For example, if a search for a particular query
+         requests matching documents 10 through 19, and queryWindowSize is 50,
+         then documents 0 through 50 will be collected and cached.  Any further
+         requests in that range can be satisfied via the cache.  -->
+    <queryResultWindowSize>10</queryResultWindowSize>
+
+    <!-- This entry enables an int hash representation for filters (DocSets)
+         when the number of items in the set is less than maxSize.  For smaller
+         sets, this representation is more memory efficient, more efficient to
+         iterate over, and faster to take intersections.  -->
+    <HashDocSet maxSize="3000" loadFactor="0.75"/>
+
+
+    <!-- boolToFilterOptimizer converts boolean clauses with zero boost
+         into cached filters if the number of docs selected by the clause exceeds
+         the threshold (represented as a fraction of the total index) -->
+    <boolTofilterOptimizer enabled="true" cacheSize="32" threshold=".05"/>
+
+
+    <!-- a newSearcher event is fired whenever a new searcher is being prepared
+         and there is a current searcher handling requests (aka registered). -->
+    <!-- QuerySenderListener takes an array of NamedList and executes a
+         local query request for each NamedList in sequence. -->
+    <!--
+    <listener event="newSearcher" class="solr.QuerySenderListener">
+      <arr name="queries">
+        <lst> <str name="q">solr</str> <str name="start">0</str>
<str name="rows">10</str> </lst>
+        <lst> <str name="q">rocks</str> <str name="start">0</str>
<str name="rows">10</str> </lst>
+      </arr>
+    </listener>
+    -->
+
+    <!-- a firstSearcher event is fired whenever a new searcher is being
+         prepared but there is no current registered searcher to handle
+         requests or to gain autowarming data from. -->
+    <!--
+    <listener event="firstSearcher" class="solr.QuerySenderListener">
+      <arr name="queries">
+        <lst> <str name="q">fast_warm</str> <str name="start">0</str>
<str name="rows">10</str> </lst>
+      </arr>
+    </listener>
+    -->
+
+    <!-- If a search request comes in and there is no current registered searcher,
+         then immediately register the still warming searcher and use it.  If
+         "false" then all requests will block until the first searcher is done
+         warming. -->
+    <useColdSearcher>false</useColdSearcher>
+
+  </query>
+
+
+  <!-- requestHandler plugins... incoming queries will be dispatched to the
+     correct handler based on the qt (query type) param matching the
+     name of registered handlers.
+     The "standard" request handler is the default and will be used if qt
+     is not specified in the request.
+  -->
+  <requestHandler name="standard" class="solr.StandardRequestHandler">
+    <!-- default values for query parameters -->
+     <lst name="defaults">
+       <str name="echoParams">explicit</str>
+       <!-- 
+       <int name="rows">10</int>
+       <str name="fl">*</str>
+       <str name="version">2.1</str>
+        -->
+     </lst>
+  </requestHandler>
+
+  <!-- queryResponseWriter plugins... query responses will be written using the
+    writer specified by the 'wt' request parameter matching the name of a registered
+    writer.
+    The "standard" writer is the default and will be used if 'wt' is not specified 
+    in the request. XMLResponseWriter will be used if nothing is specified here.
+    The json, python, and ruby writers are also available by default.
+
+    <queryResponseWriter name="standard" class="org.apache.solr.request.XMLResponseWriter"/>
+    <queryResponseWriter name="json" class="org.apache.solr.request.JSONResponseWriter"/>
+    <queryResponseWriter name="python" class="org.apache.solr.request.PythonResponseWriter"/>
+    <queryResponseWriter name="ruby" class="org.apache.solr.request.RubyResponseWriter"/>
+
+    <queryResponseWriter name="custom" class="com.example.MyResponseWriter"/>
+  -->
+
+  <!-- XSLT response writer transforms the XML output by any xslt file found
+       in Solr's conf/xslt directory.  Changes to xslt files are checked for
+       every xsltCacheLifetimeSeconds.  
+   -->
+  <queryResponseWriter name="xslt" class="org.apache.solr.request.XSLTResponseWriter">
+    <int name="xsltCacheLifetimeSeconds">5</int>
+  </queryResponseWriter> 
+    
+  <!-- config for the admin interface --> 
+  <admin>
+    <defaultQuery>solr</defaultQuery>
+    <gettableFiles>solrconfig.xml schema.xml admin-extra.html</gettableFiles>
+    <!-- pingQuery should be "URLish" ...
+         &amp; separated key=val pairs ... but there shouldn't be any
+         URL escaping of the values -->
+    <pingQuery>
+     qt=dismax&amp;q=solr&amp;start=3&amp;fq=id:[* TO *]&amp;fq=cat:[* TO
*]
+    </pingQuery>
+    <!-- configure a healthcheck file for servers behind a loadbalancer
+    <healthcheck type="file">server-enabled</healthcheck>
+    -->
+  </admin>
+
+</config>

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/conf/solrconfig.xml
------------------------------------------------------------------------------
    svn:executable = *

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/conf/stopwords.txt
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/conf/stopwords.txt?view=auto&rev=491827
==============================================================================
--- incubator/solr/trunk/client/ruby/flare/solr/solr/conf/stopwords.txt (added)
+++ incubator/solr/trunk/client/ruby/flare/solr/solr/conf/stopwords.txt Tue Jan  2 08:11:42
2007
@@ -0,0 +1,57 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#-----------------------------------------------------------------------
+# a couple of test stopwords to test that the words are really being
+# configured from this file:
+stopworda
+stopwordb
+
+#Standard english stop words taken from Lucene's StopAnalyzer
+an
+and
+are
+as
+at
+be
+but
+by
+for
+if
+in
+into
+is
+it
+no
+not
+of
+on
+or
+s
+such
+t
+that
+the
+their
+then
+there
+these
+they
+this
+to
+was
+will
+with
+

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/conf/synonyms.txt
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/conf/synonyms.txt?view=auto&rev=491827
==============================================================================
--- incubator/solr/trunk/client/ruby/flare/solr/solr/conf/synonyms.txt (added)
+++ incubator/solr/trunk/client/ruby/flare/solr/solr/conf/synonyms.txt Tue Jan  2 08:11:42
2007
@@ -0,0 +1,31 @@
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#-----------------------------------------------------------------------
+#some test synonym mappings unlikely to appear in real input text
+aaa => aaaa
+bbb => bbbb1 bbbb2
+ccc => cccc1,cccc2
+a\=>a => b\=>b
+a\,a => b\,b
+fooaaa,baraaa,bazaaa
+
+# Some synonym groups specific to this example
+GB,gib,gigabyte,gigabytes
+MB,mib,megabyte,megabytes
+Television, Televisions, TV, TVs
+#notice we use "gib" instead of "GiB" so any WordDelimiterFilter coming
+#after us won't split it into two words.
+
+# Synonym mappings can be used for spelling correction too
+pixima => pixma
+

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/conf/xslt/example.xsl
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/conf/xslt/example.xsl?view=auto&rev=491827
==============================================================================
--- incubator/solr/trunk/client/ruby/flare/solr/solr/conf/xslt/example.xsl (added)
+++ incubator/solr/trunk/client/ruby/flare/solr/solr/conf/xslt/example.xsl Tue Jan  2 08:11:42
2007
@@ -0,0 +1,132 @@
+<?xml version='1.0' encoding='UTF-8'?>
+
+<!-- 
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License.  You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ -->
+
+<!-- 
+  Simple transform of Solr query results to HTML
+ -->
+<xsl:stylesheet version='1.0'
+    xmlns:xsl='http://www.w3.org/1999/XSL/Transform'
+>
+
+  <xsl:output media-type="text/html"/>
+  
+  <xsl:variable name="title" select="concat('Solr search results (',response/result/@numFound,'
documents)')"/>
+  
+  <xsl:template match='/'>
+    <html>
+      <head>
+        <title><xsl:value-of select="$title"/></title>
+        <xsl:call-template name="css"/>
+      </head>
+      <body>
+        <h1><xsl:value-of select="$title"/></h1>
+        <div class="note">
+          This has been formatted by the sample "example.xsl" transform -
+          use your own XSLT to get a nicer page
+        </div>
+        <xsl:apply-templates select="response/result/doc"/>
+      </body>
+    </html>
+  </xsl:template>
+  
+  <xsl:template match="doc">
+    <xsl:variable name="pos" select="position()"/>
+    <div class="doc">
+      <table width="100%">
+        <xsl:apply-templates>
+          <xsl:with-param name="pos"><xsl:value-of select="$pos"/></xsl:with-param>
+        </xsl:apply-templates>
+      </table>
+    </div>
+  </xsl:template>
+
+  <xsl:template match="doc/*[@name='score']" priority="100">
+    <xsl:param name="pos"></xsl:param>
+    <tr>
+      <td class="name">
+        <xsl:value-of select="@name"/>
+      </td>
+      <td class="value">
+        <xsl:value-of select="."/>
+
+        <xsl:if test="boolean(//lst[@name='explain'])">
+          <xsl:element name="a">
+            <!-- can't allow whitespace here -->
+            <xsl:attribute name="href">javascript:toggle("<xsl:value-of select="concat('exp-',$pos)"
/>");</xsl:attribute>?</xsl:element>
+          <br/>
+          <xsl:element name="div">
+            <xsl:attribute name="class">exp</xsl:attribute>
+            <xsl:attribute name="id">
+              <xsl:value-of select="concat('exp-',$pos)" />
+            </xsl:attribute>
+            <xsl:value-of select="//lst[@name='explain']/str[position()=$pos]"/>
+          </xsl:element>
+        </xsl:if>
+      </td>
+    </tr>
+  </xsl:template>
+
+  <xsl:template match="doc/arr" priority="100">
+    <tr>
+      <td class="name">
+        <xsl:value-of select="@name"/>
+      </td>
+      <td class="value">
+        <ul>
+        <xsl:for-each select="*">
+          <li><xsl:value-of select="."/></li>
+        </xsl:for-each>
+        </ul>
+      </td>
+    </tr>
+  </xsl:template>
+
+
+  <xsl:template match="doc/*">
+    <tr>
+      <td class="name">
+        <xsl:value-of select="@name"/>
+      </td>
+      <td class="value">
+        <xsl:value-of select="."/>
+      </td>
+    </tr>
+  </xsl:template>
+
+  <xsl:template match="*"/>
+  
+  <xsl:template name="css">
+    <script>
+      function toggle(id) {
+        var obj = document.getElementById(id);
+        obj.style.display = (obj.style.display != 'block') ? 'block' : 'none';
+      }
+    </script>
+    <style type="text/css">
+      body { font-family: "Lucida Grande", sans-serif }
+      td.name { font-style: italic; font-size:80%; }
+      td { vertical-align: top; }
+      ul { margin: 0px; margin-left: 1em; padding: 0px; }
+      .note { font-size:80%; }
+      .doc { margin-top: 1em; border-top: solid grey 1px; }
+      .exp { display: none; font-family: monospace; white-space: pre; }
+    </style>
+  </xsl:template>
+
+</xsl:stylesheet>

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.f0
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.f0?view=auto&rev=491827
==============================================================================
--- incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.f0 (added)
+++ incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.f0 Tue Jan  2 08:11:42
2007
@@ -0,0 +1 @@
+x
\ No newline at end of file

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fdt
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fdt?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fdt
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fdx
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fdx?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fdx
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fnm
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fnm?view=auto&rev=491827
==============================================================================
--- incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fnm (added)
+++ incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.fnm Tue Jan  2 08:11:42
2007
@@ -0,0 +1 @@
+textid
\ No newline at end of file

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.frq
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.frq?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.frq
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.prx
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.prx?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.prx
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.tii
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.tii?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.tii
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.tis
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.tis?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/_0.tis
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/deletable
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/deletable?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/deletable
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream

Added: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/segments
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/segments?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/solr/data/index/segments
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream

Added: incubator/solr/trunk/client/ruby/flare/solr/webapps/solr.war
URL: http://svn.apache.org/viewvc/incubator/solr/trunk/client/ruby/flare/solr/webapps/solr.war?view=auto&rev=491827
==============================================================================
Binary file - no diff available.

Propchange: incubator/solr/trunk/client/ruby/flare/solr/webapps/solr.war
------------------------------------------------------------------------------
    svn:mime-type = application/octet-stream



Mime
View raw message