lucene-lucene-net-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From mhern...@apache.org
Subject [Lucene.Net] svn commit: r1157480 [15/18] - in /incubator/lucene.net/branches/Lucene.Net_2_9_4g: ./ build/scripts/ lib/Gallio.3.2.750/ lib/Gallio.3.2.750/licenses/ lib/Gallio.3.2.750/tools/ lib/Gallio.3.2.750/tools/NCover/ lib/Gallio.3.2.750/tools/NCover/Resources/...
Date Sun, 14 Aug 2011 07:13:16 GMT
Added: incubator/lucene.net/branches/Lucene.Net_2_9_4g/lib/Gallio.3.2.750/tools/NUnit/Latest/nunit.framework.xml
URL: http://svn.apache.org/viewvc/incubator/lucene.net/branches/Lucene.Net_2_9_4g/lib/Gallio.3.2.750/tools/NUnit/Latest/nunit.framework.xml?rev=1157480&view=auto
==============================================================================
--- incubator/lucene.net/branches/Lucene.Net_2_9_4g/lib/Gallio.3.2.750/tools/NUnit/Latest/nunit.framework.xml (added)
+++ incubator/lucene.net/branches/Lucene.Net_2_9_4g/lib/Gallio.3.2.750/tools/NUnit/Latest/nunit.framework.xml Sun Aug 14 07:13:10 2011
@@ -0,0 +1,10385 @@
+<?xml version="1.0"?>
+<doc>
+    <assembly>
+        <name>nunit.framework</name>
+    </assembly>
+    <members>
+        <member name="T:NUnit.Framework.CategoryAttribute">
+            <summary>
+            Attribute used to apply a category to a test
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.CategoryAttribute.categoryName">
+            <summary>
+            The name of the category
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.CategoryAttribute.#ctor(System.String)">
+            <summary>
+            Construct attribute for a given category based on
+            a name. The name may not contain the characters ',',
+            '+', '-' or '!'. However, this is not checked in the
+            constructor since it would cause an error to arise at
+            as the test was loaded without giving a clear indication
+            of where the problem is located. The error is handled
+            in NUnitFramework.cs by marking the test as not
+            runnable.
+            </summary>
+            <param name="name">The name of the category</param>
+        </member>
+        <member name="M:NUnit.Framework.CategoryAttribute.#ctor">
+            <summary>
+            Protected constructor uses the Type name as the name
+            of the category.
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.CategoryAttribute.Name">
+            <summary>
+            The name of the category
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.DatapointAttribute">
+            <summary>
+            Used to mark a field for use as a datapoint when executing a theory
+            within the same fixture that requires an argument of the field's Type.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.DatapointsAttribute">
+            <summary>
+            Used to mark an array as containing a set of datapoints to be used
+            executing a theory within the same fixture that requires an argument 
+            of the Type of the array elements.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.DescriptionAttribute">
+            <summary>
+            Attribute used to provide descriptive text about a 
+            test case or fixture.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.DescriptionAttribute.#ctor(System.String)">
+            <summary>
+            Construct the attribute
+            </summary>
+            <param name="description">Text describing the test</param>
+        </member>
+        <member name="P:NUnit.Framework.DescriptionAttribute.Description">
+            <summary>
+            Gets the test description
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.MessageMatch">
+            <summary>
+            Enumeration indicating how the expected message parameter is to be used
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.MessageMatch.Exact">
+            Expect an exact match
+        </member>
+        <member name="F:NUnit.Framework.MessageMatch.Contains">
+            Expect a message containing the parameter string
+        </member>
+        <member name="F:NUnit.Framework.MessageMatch.Regex">
+            Match the regular expression provided as a parameter
+        </member>
+        <member name="F:NUnit.Framework.MessageMatch.StartsWith">
+            Expect a message that starts with the parameter string
+        </member>
+        <member name="T:NUnit.Framework.ExpectedExceptionAttribute">
+            <summary>
+            ExpectedExceptionAttribute
+            </summary>
+            
+        </member>
+        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor">
+            <summary>
+            Constructor for a non-specific exception
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.Type)">
+            <summary>
+            Constructor for a given type of exception
+            </summary>
+            <param name="exceptionType">The type of the expected exception</param>
+        </member>
+        <member name="M:NUnit.Framework.ExpectedExceptionAttribute.#ctor(System.String)">
+            <summary>
+            Constructor for a given exception name
+            </summary>
+            <param name="exceptionName">The full name of the expected exception</param>
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedException">
+            <summary>
+            Gets or sets the expected exception type
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedExceptionName">
+            <summary>
+            Gets or sets the full Type name of the expected exception
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.ExpectedMessage">
+            <summary>
+            Gets or sets the expected message text
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.UserMessage">
+            <summary>
+            Gets or sets the user message displayed in case of failure
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.MatchType">
+            <summary>
+             Gets or sets the type of match to be performed on the expected message
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ExpectedExceptionAttribute.Handler">
+            <summary>
+             Gets the name of a method to be used as an exception handler
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.ExplicitAttribute">
+            <summary>
+            ExplicitAttribute marks a test or test fixture so that it will
+            only be run if explicitly executed from the gui or command line
+            or if it is included by use of a filter. The test will not be
+            run simply because an enclosing suite is run.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.ExplicitAttribute.#ctor">
+            <summary>
+            Default constructor
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.ExplicitAttribute.#ctor(System.String)">
+            <summary>
+            Constructor with a reason
+            </summary>
+            <param name="reason">The reason test is marked explicit</param>
+        </member>
+        <member name="P:NUnit.Framework.ExplicitAttribute.Reason">
+            <summary>
+            The reason test is marked explicit
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.IgnoreAttribute">
+            <summary>
+            Attribute used to mark a test that is to be ignored.
+            Ignored tests result in a warning message when the
+            tests are run.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.IgnoreAttribute.#ctor">
+            <summary>
+            Constructs the attribute without giving a reason 
+            for ignoring the test.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.IgnoreAttribute.#ctor(System.String)">
+            <summary>
+            Constructs the attribute giving a reason for ignoring the test
+            </summary>
+            <param name="reason">The reason for ignoring the test</param>
+        </member>
+        <member name="P:NUnit.Framework.IgnoreAttribute.Reason">
+            <summary>
+            The reason for ignoring a test
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.IncludeExcludeAttribute">
+            <summary>
+            Abstract base for Attributes that are used to include tests
+            in the test run based on environmental settings.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor">
+            <summary>
+            Constructor with no included items specified, for use
+            with named property syntax.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.IncludeExcludeAttribute.#ctor(System.String)">
+            <summary>
+            Constructor taking one or more included items
+            </summary>
+            <param name="include">Comma-delimited list of included items</param>
+        </member>
+        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Include">
+            <summary>
+            Name of the item that is needed in order for
+            a test to run. Multiple itemss may be given,
+            separated by a comma.
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Exclude">
+            <summary>
+            Name of the item to be excluded. Multiple items
+            may be given, separated by a comma.
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.IncludeExcludeAttribute.Reason">
+            <summary>
+            The reason for including or excluding the test
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.PlatformAttribute">
+            <summary>
+            PlatformAttribute is used to mark a test fixture or an
+            individual method as applying to a particular platform only.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.PlatformAttribute.#ctor">
+            <summary>
+            Constructor with no platforms specified, for use
+            with named property syntax.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.PlatformAttribute.#ctor(System.String)">
+            <summary>
+            Constructor taking one or more platforms
+            </summary>
+            <param name="platforms">Comma-deliminted list of platforms</param>
+        </member>
+        <member name="T:NUnit.Framework.CultureAttribute">
+            <summary>
+            CultureAttribute is used to mark a test fixture or an
+            individual method as applying to a particular Culture only.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.CultureAttribute.#ctor">
+            <summary>
+            Constructor with no cultures specified, for use
+            with named property syntax.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.CultureAttribute.#ctor(System.String)">
+            <summary>
+            Constructor taking one or more cultures
+            </summary>
+            <param name="cultures">Comma-deliminted list of cultures</param>
+        </member>
+        <member name="T:NUnit.Framework.CombinatorialAttribute">
+            <summary>
+            Marks a test to use a combinatorial join of any argument data 
+            provided. NUnit will create a test case for every combination of 
+            the arguments provided. This can result in a large number of test
+            cases and so should be used judiciously. This is the default join
+            type, so the attribute need not be used except as documentation.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.PropertyAttribute">
+            <summary>
+            PropertyAttribute is used to attach information to a test as a name/value pair..
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.String)">
+            <summary>
+            Construct a PropertyAttribute with a name and string value
+            </summary>
+            <param name="propertyName">The name of the property</param>
+            <param name="propertyValue">The property value</param>
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Int32)">
+            <summary>
+            Construct a PropertyAttribute with a name and int value
+            </summary>
+            <param name="propertyName">The name of the property</param>
+            <param name="propertyValue">The property value</param>
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.String,System.Double)">
+            <summary>
+            Construct a PropertyAttribute with a name and double value
+            </summary>
+            <param name="propertyName">The name of the property</param>
+            <param name="propertyValue">The property value</param>
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor">
+            <summary>
+            Constructor for derived classes that set the
+            property dictionary directly.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.PropertyAttribute.#ctor(System.Object)">
+            <summary>
+            Constructor for use by derived classes that use the
+            name of the type as the property name. Derived classes
+            must ensure that the Type of the property value is
+            a standard type supported by the BCL. Any custom
+            types will cause a serialization Exception when
+            in the client.
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.PropertyAttribute.Properties">
+            <summary>
+            Gets the property dictionary for this attribute
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.CombinatorialAttribute.#ctor">
+            <summary>
+            Default constructor
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.PairwiseAttribute">
+            <summary>
+            Marks a test to use pairwise join of any argument data provided. 
+            NUnit will attempt too excercise every pair of argument values at 
+            least once, using as small a number of test cases as it can. With
+            only two arguments, this is the same as a combinatorial join.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.PairwiseAttribute.#ctor">
+            <summary>
+            Default constructor
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.SequentialAttribute">
+            <summary>
+            Marks a test to use a sequential join of any argument data
+            provided. NUnit will use arguements for each parameter in
+            sequence, generating test cases up to the largest number
+            of argument values provided and using null for any arguments
+            for which it runs out of values. Normally, this should be
+            used with the same number of arguments for each parameter.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.SequentialAttribute.#ctor">
+            <summary>
+            Default constructor
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.MaxTimeAttribute">
+            <summary>
+            Summary description for MaxTimeAttribute.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.MaxTimeAttribute.#ctor(System.Int32)">
+            <summary>
+            Construct a MaxTimeAttribute, given a time in milliseconds.
+            </summary>
+            <param name="milliseconds">The maximum elapsed time in milliseconds</param>
+        </member>
+        <member name="T:NUnit.Framework.RandomAttribute">
+            <summary>
+            RandomAttribute is used to supply a set of random values
+            to a single parameter of a parameterized test.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.ValuesAttribute">
+            <summary>
+            ValuesAttribute is used to provide literal arguments for
+            an individual parameter of a test.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.ParameterDataAttribute">
+            <summary>
+            Abstract base class for attributes that apply to parameters 
+            and supply data for the parameter.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.ParameterDataAttribute.GetData(System.Reflection.ParameterInfo)">
+            <summary>
+            Gets the data to be provided to the specified parameter
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.ValuesAttribute.data">
+            <summary>
+            The collection of data to be returned. Must
+            be set by any derived attribute classes.
+            We use an object[] so that the individual
+            elements may have their type changed in GetData
+            if necessary.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object)">
+            <summary>
+            Construct with one argument
+            </summary>
+            <param name="arg1"></param>
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object)">
+            <summary>
+            Construct with two arguments
+            </summary>
+            <param name="arg1"></param>
+            <param name="arg2"></param>
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object,System.Object,System.Object)">
+            <summary>
+            Construct with three arguments
+            </summary>
+            <param name="arg1"></param>
+            <param name="arg2"></param>
+            <param name="arg3"></param>
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.#ctor(System.Object[])">
+            <summary>
+            Construct with an array of arguments
+            </summary>
+            <param name="args"></param>
+        </member>
+        <member name="M:NUnit.Framework.ValuesAttribute.GetData(System.Reflection.ParameterInfo)">
+            <summary>
+            Get the collection of values to be used as arguments
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32)">
+            <summary>
+            Construct a set of doubles from 0.0 to 1.0,
+            specifying only the count.
+            </summary>
+            <param name="count"></param>
+        </member>
+        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Double,System.Double,System.Int32)">
+            <summary>
+            Construct a set of doubles from min to max
+            </summary>
+            <param name="min"></param>
+            <param name="max"></param>
+            <param name="count"></param>
+        </member>
+        <member name="M:NUnit.Framework.RandomAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
+            <summary>
+            Construct a set of ints from min to max
+            </summary>
+            <param name="min"></param>
+            <param name="max"></param>
+            <param name="count"></param>
+        </member>
+        <member name="M:NUnit.Framework.RandomAttribute.GetData(System.Reflection.ParameterInfo)">
+            <summary>
+            Get the collection of values to be used as arguments
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.RangeAttribute">
+            <summary>
+            RangeAttribute is used to supply a range of values to an
+            individual parameter of a parameterized test.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32)">
+            <summary>
+            Construct a range of ints using default step of 1
+            </summary>
+            <param name="from"></param>
+            <param name="to"></param>
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int32,System.Int32,System.Int32)">
+            <summary>
+            Construct a range of ints specifying the step size 
+            </summary>
+            <param name="from"></param>
+            <param name="to"></param>
+            <param name="step"></param>
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Int64,System.Int64,System.Int64)">
+            <summary>
+            Construct a range of longs
+            </summary>
+            <param name="from"></param>
+            <param name="to"></param>
+            <param name="step"></param>
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Double,System.Double,System.Double)">
+            <summary>
+            Construct a range of doubles
+            </summary>
+            <param name="from"></param>
+            <param name="to"></param>
+            <param name="step"></param>
+        </member>
+        <member name="M:NUnit.Framework.RangeAttribute.#ctor(System.Single,System.Single,System.Single)">
+            <summary>
+            Construct a range of floats
+            </summary>
+            <param name="from"></param>
+            <param name="to"></param>
+            <param name="step"></param>
+        </member>
+        <member name="T:NUnit.Framework.RepeatAttribute">
+            <summary>
+            RepeatAttribute may be applied to test case in order
+            to run it multiple times.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.RepeatAttribute.#ctor(System.Int32)">
+            <summary>
+            Construct a RepeatAttribute
+            </summary>
+            <param name="count">The number of times to run the test</param>
+        </member>
+        <member name="T:NUnit.Framework.RequiredAddinAttribute">
+            <summary>
+            RequiredAddinAttribute may be used to indicate the names of any addins
+            that must be present in order to run some or all of the tests in an
+            assembly. If the addin is not loaded, the entire assembly is marked
+            as NotRunnable.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.RequiredAddinAttribute.#ctor(System.String)">
+            <summary>
+            Initializes a new instance of the <see cref="T:RequiredAddinAttribute"/> class.
+            </summary>
+            <param name="requiredAddin">The required addin.</param>
+        </member>
+        <member name="P:NUnit.Framework.RequiredAddinAttribute.RequiredAddin">
+            <summary>
+            Gets the name of required addin.
+            </summary>
+            <value>The required addin name.</value>
+        </member>
+        <member name="T:NUnit.Framework.SetCultureAttribute">
+            <summary>
+            Summary description for SetCultureAttribute.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.SetCultureAttribute.#ctor(System.String)">
+            <summary>
+            Construct given the name of a culture
+            </summary>
+            <param name="culture"></param>
+        </member>
+        <member name="T:NUnit.Framework.SetUICultureAttribute">
+            <summary>
+            Summary description for SetUICultureAttribute.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.SetUICultureAttribute.#ctor(System.String)">
+            <summary>
+            Construct given the name of a culture
+            </summary>
+            <param name="culture"></param>
+        </member>
+        <member name="T:NUnit.Framework.SetUpAttribute">
+            <summary>
+            Attribute used to mark a class that contains one-time SetUp 
+            and/or TearDown methods that apply to all the tests in a
+            namespace or an assembly.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.SetUpFixtureAttribute">
+            <summary>
+            SetUpFixtureAttribute is used to identify a SetUpFixture
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.SuiteAttribute">
+            <summary>
+            Attribute used to mark a static (shared in VB) property
+            that returns a list of tests.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.TearDownAttribute">
+            <summary>
+            Attribute used to identify a method that is called 
+            immediately after each test is run. The method is 
+            guaranteed to be called, even if an exception is thrown.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.TestAttribute">
+            <summary>
+            Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/> 
+            class makes the method callable from the NUnit test runner. There is a property 
+            called Description which is optional which you can provide a more detailed test
+            description. This class cannot be inherited.
+            </summary>
+            
+            <example>
+            [TestFixture]
+            public class Fixture
+            {
+              [Test]
+              public void MethodToTest()
+              {}
+              
+              [Test(Description = "more detailed description")]
+              publc void TestDescriptionMethod()
+              {}
+            }
+            </example>
+            
+        </member>
+        <member name="P:NUnit.Framework.TestAttribute.Description">
+            <summary>
+            Descriptive text for this test
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.TestCaseAttribute">
+            <summary>
+            TestCaseAttribute is used to mark parameterized test cases
+            and provide them with their arguments.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.ITestCaseData">
+            <summary>
+            The ITestCaseData interface is implemented by a class
+            that is able to return complete testcases for use by
+            a parameterized test method.
+            
+            NOTE: This interface is used in both the framework
+            and the core, even though that results in two different
+            types. However, sharing the source code guarantees that
+            the various implementations will be compatible and that
+            the core is able to reflect successfully over the
+            framework implementations of ITestCaseData.
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.Arguments">
+            <summary>
+            Gets the argument list to be provided to the test
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.Result">
+            <summary>
+            Gets the expected result
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.ExpectedException">
+            <summary>
+             Gets the expected exception Type
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.ExpectedExceptionName">
+            <summary>
+            Gets the FullName of the expected exception
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.TestName">
+            <summary>
+            Gets the name to be used for the test
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.Description">
+            <summary>
+            Gets the description of the test
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.Ignored">
+            <summary>
+            Gets a value indicating whether this <see cref="T:NUnit.Framework.ITestCaseData"/> is ignored.
+            </summary>
+            <value><c>true</c> if ignored; otherwise, <c>false</c>.</value>
+        </member>
+        <member name="P:NUnit.Framework.ITestCaseData.IgnoreReason">
+            <summary>
+            Gets the ignore reason.
+            </summary>
+            <value>The ignore reason.</value>
+        </member>
+        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object[])">
+            <summary>
+            Construct a TestCaseAttribute with a list of arguments.
+            This constructor is not CLS-Compliant
+            </summary>
+            <param name="arguments"></param>
+        </member>
+        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object)">
+            <summary>
+            Construct a TestCaseAttribute with a single argument
+            </summary>
+            <param name="arg"></param>
+        </member>
+        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object)">
+            <summary>
+            Construct a TestCaseAttribute with a two arguments
+            </summary>
+            <param name="arg1"></param>
+            <param name="arg2"></param>
+        </member>
+        <member name="M:NUnit.Framework.TestCaseAttribute.#ctor(System.Object,System.Object,System.Object)">
+            <summary>
+            Construct a TestCaseAttribute with a three arguments
+            </summary>
+            <param name="arg1"></param>
+            <param name="arg2"></param>
+            <param name="arg3"></param>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Arguments">
+            <summary>
+            Gets the list of arguments to a test case
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Result">
+            <summary>
+            Gets or sets the expected result.
+            </summary>
+            <value>The result.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedException">
+            <summary>
+            Gets or sets the expected exception.
+            </summary>
+            <value>The expected exception.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedExceptionName">
+            <summary>
+            Gets or sets the name the expected exception.
+            </summary>
+            <value>The expected name of the exception.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.ExpectedMessage">
+            <summary>
+            Gets or sets the expected message of the expected exception
+            </summary>
+            <value>The expected message of the exception.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.MatchType">
+            <summary>
+             Gets or sets the type of match to be performed on the expected message
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Description">
+            <summary>
+            Gets or sets the description.
+            </summary>
+            <value>The description.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.TestName">
+            <summary>
+            Gets or sets the name of the test.
+            </summary>
+            <value>The name of the test.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Ignore">
+            <summary>
+            Gets or sets the ignored status of the test
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.Ignored">
+            <summary>
+            Gets or sets the ignored status of the test
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseAttribute.IgnoreReason">
+            <summary>
+            Gets the ignore reason.
+            </summary>
+            <value>The ignore reason.</value>
+        </member>
+        <member name="T:NUnit.Framework.TestCaseSourceAttribute">
+            <summary>
+            FactoryAttribute indicates the source to be used to
+            provide test cases for a test method.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.String)">
+            <summary>
+            Construct with the name of the factory - for use with languages
+            that don't support params arrays.
+            </summary>
+            <param name="sourceName">An array of the names of the factories that will provide data</param>
+        </member>
+        <member name="M:NUnit.Framework.TestCaseSourceAttribute.#ctor(System.Type,System.String)">
+            <summary>
+            Construct with a Type and name - for use with languages
+            that don't support params arrays.
+            </summary>
+            <param name="sourceType">The Type that will provide data</param>
+            <param name="sourceName">The name of the method, property or field that will provide data</param>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceName">
+            <summary>
+            The name of a the method, property or fiend to be used as a source
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.TestCaseSourceAttribute.SourceType">
+            <summary>
+            A Type to be used as a source
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.TestFixtureAttribute">
+            <example>
+            [TestFixture]
+            public class ExampleClass 
+            {}
+            </example>
+        </member>
+        <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor">
+            <summary>
+            Default constructor
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.TestFixtureAttribute.#ctor(System.Object[])">
+            <summary>
+            Construct with a object[] representing a set of arguments. 
+            In .NET 2.0, the arguments may later be separated into
+            type arguments and constructor arguments.
+            </summary>
+            <param name="arguments"></param>
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.Description">
+            <summary>
+            Descriptive text for this fixture
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.Arguments">
+            <summary>
+            The arguments originally provided to the attribute
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.Ignore">
+            <summary>
+            Gets or sets a value indicating whether this <see cref="T:NUnit.Framework.TestFixtureAttribute"/> should be ignored.
+            </summary>
+            <value><c>true</c> if ignore; otherwise, <c>false</c>.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.IgnoreReason">
+            <summary>
+            Gets or sets the ignore reason. May set Ignored as a side effect.
+            </summary>
+            <value>The ignore reason.</value>
+        </member>
+        <member name="P:NUnit.Framework.TestFixtureAttribute.TypeArgs">
+            <summary>
+            Get or set the type arguments. If not set
+            explicitly, any leading arguments that are
+            Types are taken as type arguments.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.TestFixtureSetUpAttribute">
+            <summary>
+            Attribute used to identify a method that is 
+            called before any tests in a fixture are run.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.TestFixtureTearDownAttribute">
+            <summary>
+            Attribute used to identify a method that is called after
+            all the tests in a fixture have run. The method is 
+            guaranteed to be called, even if an exception is thrown.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.TheoryAttribute">
+            <summary>
+            Adding this attribute to a method within a <seealso cref="T:NUnit.Framework.TestFixtureAttribute"/> 
+            class makes the method callable from the NUnit test runner. There is a property 
+            called Description which is optional which you can provide a more detailed test
+            description. This class cannot be inherited.
+            </summary>
+            
+            <example>
+            [TestFixture]
+            public class Fixture
+            {
+              [Test]
+              public void MethodToTest()
+              {}
+              
+              [Test(Description = "more detailed description")]
+              publc void TestDescriptionMethod()
+              {}
+            }
+            </example>
+            
+        </member>
+        <member name="T:NUnit.Framework.TimeoutAttribute">
+            <summary>
+            WUsed on a method, marks the test with a timeout value in milliseconds. 
+            The test will be run in a separate thread and is cancelled if the timeout 
+            is exceeded. Used on a method or assembly, sets the default timeout 
+            for all contained test methods.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.TimeoutAttribute.#ctor(System.Int32)">
+            <summary>
+            Construct a TimeoutAttribute given a time in milliseconds
+            </summary>
+            <param name="timeout">The timeout value in milliseconds</param>
+        </member>
+        <member name="T:NUnit.Framework.RequiresSTAAttribute">
+            <summary>
+            Marks a test that must run in the STA, causing it
+            to run in a separate thread if necessary.
+            
+            On methods, you may also use STAThreadAttribute
+            to serve the same purpose.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.RequiresSTAAttribute.#ctor">
+            <summary>
+            Construct a RequiresSTAAttribute
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.RequiresMTAAttribute">
+            <summary>
+            Marks a test that must run in the MTA, causing it
+            to run in a separate thread if necessary.
+            
+            On methods, you may also use MTAThreadAttribute
+            to serve the same purpose.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.RequiresMTAAttribute.#ctor">
+            <summary>
+            Construct a RequiresMTAAttribute
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.RequiresThreadAttribute">
+            <summary>
+            Marks a test that must run on a separate thread.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor">
+            <summary>
+            Construct a RequiresThreadAttribute
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.RequiresThreadAttribute.#ctor(System.Threading.ApartmentState)">
+            <summary>
+            Construct a RequiresThreadAttribute, specifying the apartment
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.ValueSourceAttribute">
+            <summary>
+            ValueSourceAttribute indicates the source to be used to
+            provide data for one parameter of a test method.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.String)">
+            <summary>
+            Construct with the name of the factory - for use with languages
+            that don't support params arrays.
+            </summary>
+            <param name="sourceName">The name of the data source to be used</param>
+        </member>
+        <member name="M:NUnit.Framework.ValueSourceAttribute.#ctor(System.Type,System.String)">
+            <summary>
+            Construct with a Type and name - for use with languages
+            that don't support params arrays.
+            </summary>
+            <param name="sourceType">The Type that will provide data</param>
+            <param name="sourceName">The name of the method, property or field that will provide data</param>
+        </member>
+        <member name="P:NUnit.Framework.ValueSourceAttribute.SourceName">
+            <summary>
+            The name of a the method, property or fiend to be used as a source
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.ValueSourceAttribute.SourceType">
+            <summary>
+            A Type to be used as a source
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.AttributeExistsConstraint">
+            <summary>
+            AttributeExistsConstraint tests for the presence of a
+            specified attribute on  a Type.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.Constraint">
+            <summary>
+            The Constraint class is the base of all built-in constraints
+            within NUnit. It provides the operator overloads used to combine 
+            constraints.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.IResolveConstraint">
+            <summary>
+            The IConstraintExpression interface is implemented by all
+            complete and resolvable constraints and expressions.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.IResolveConstraint.Resolve">
+            <summary>
+            Return the top-level constraint for this expression
+            </summary>
+            <returns></returns>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.UNSET">
+            <summary>
+            Static UnsetObject used to detect derived constraints
+            failing to set the actual value.
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.actual">
+            <summary>
+            The actual value being tested against a constraint
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.displayName">
+            <summary>
+            The display name of this Constraint for use by ToString()
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.argcnt">
+            <summary>
+            Argument fields used by ToString();
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.Constraint.builder">
+            <summary>
+            The builder holding this constraint
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor">
+            <summary>
+            Construct a constraint with no arguments
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object)">
+            <summary>
+            Construct a constraint with one argument
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.#ctor(System.Object,System.Object)">
+            <summary>
+            Construct a constraint with two arguments
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.SetBuilder(NUnit.Framework.Constraints.ConstraintBuilder)">
+            <summary>
+            Sets the ConstraintBuilder holding this constraint
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.WriteMessageTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write the failure message to the MessageWriter provided
+            as an argument. The default implementation simply passes
+            the constraint and the actual value to the writer, which
+            then displays the constraint description and the value.
+            
+            Constraints that need to provide additional details,
+            such as where the error occured can override this.
+            </summary>
+            <param name="writer">The MessageWriter on which to display the message</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(System.Object)">
+            <summary>
+            Test whether the constraint is satisfied by a given value
+            </summary>
+            <param name="actual">The value to be tested</param>
+            <returns>True for success, false for failure</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.Matches(NUnit.Framework.Constraints.ActualValueDelegate)">
+            <summary>
+            Test whether the constraint is satisfied by an
+            ActualValueDelegate that returns the value to be tested.
+            The default implementation simply evaluates the delegate
+            but derived classes may override it to provide for delayed 
+            processing.
+            </summary>
+            <param name="del">An ActualValueDelegate</param>
+            <returns>True for success, false for failure</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.Matches``1(``0@)">
+            <summary>
+            Test whether the constraint is satisfied by a given reference.
+            The default implementation simply dereferences the value but
+            derived classes may override it to provide for delayed processing.
+            </summary>
+            <param name="actual">A reference to the value to be tested</param>
+            <returns>True for success, false for failure</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write the constraint description to a MessageWriter
+            </summary>
+            <param name="writer">The writer on which the description is displayed</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write the actual value for a failing constraint test to a
+            MessageWriter. The default implementation simply writes
+            the raw value of actual, leaving it to the writer to
+            perform any formatting.
+            </summary>
+            <param name="writer">The writer on which the actual value is displayed</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.ToString">
+            <summary>
+            Default override of ToString returns the constraint DisplayName
+            followed by any arguments within angle brackets.
+            </summary>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.GetStringRepresentation">
+            <summary>
+            Returns the string representation of this constraint
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseAnd(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+            <summary>
+            This operator creates a constraint that is satisfied only if both 
+            argument constraints are satisfied.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.op_BitwiseOr(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+            <summary>
+            This operator creates a constraint that is satisfied if either 
+            of the argument constraints is satisfied.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.op_LogicalNot(NUnit.Framework.Constraints.Constraint)">
+            <summary>
+            This operator creates a constraint that is satisfied if the 
+            argument constraint is not satisfied.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32)">
+            <summary>
+            Returns a DelayedConstraint with the specified delay time.
+            </summary>
+            <param name="delayInMilliseconds">The delay in milliseconds.</param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.Constraint.After(System.Int32,System.Int32)">
+            <summary>
+            Returns a DelayedConstraint with the specified delay time
+            and polling interval.
+            </summary>
+            <param name="delayInMilliseconds">The delay in milliseconds.</param>
+            <param name="pollingInterval">The interval at which to test the constraint.</param>
+            <returns></returns>
+        </member>
+        <member name="P:NUnit.Framework.Constraints.Constraint.DisplayName">
+            <summary>
+            The display name of this Constraint for use by ToString().
+            The default value is the name of the constraint with
+            trailing "Constraint" removed. Derived classes may set
+            this to another name in their constructors.
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.Constraints.Constraint.And">
+            <summary>
+            Returns a ConstraintExpression by appending And
+            to the current constraint.
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.Constraints.Constraint.With">
+            <summary>
+            Returns a ConstraintExpression by appending And
+            to the current constraint.
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.Constraints.Constraint.Or">
+            <summary>
+            Returns a ConstraintExpression by appending Or
+            to the current constraint.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.Constraint.UnsetObject">
+            <summary>
+            Class used to detect any derived constraints
+            that fail to set the actual value in their
+            Matches override.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.#ctor(System.Type)">
+            <summary>
+            Constructs an AttributeExistsConstraint for a specific attribute Type
+            </summary>
+            <param name="type"></param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.Matches(System.Object)">
+            <summary>
+            Tests whether the object provides the expected attribute.
+            </summary>
+            <param name="actual">A Type, MethodInfo, or other ICustomAttributeProvider</param>
+            <returns>True if the expected attribute is present, otherwise false</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeExistsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Writes the description of the constraint to the specified writer
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.AttributeConstraint">
+            <summary>
+            AttributeConstraint tests that a specified attribute is present
+            on a Type or other provider and that the value of the attribute
+            satisfies some other constraint.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.PrefixConstraint">
+            <summary>
+            Abstract base class used for prefixes
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.PrefixConstraint.baseConstraint">
+            <summary>
+            The base constraint
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.PrefixConstraint.#ctor(NUnit.Framework.Constraints.IResolveConstraint)">
+            <summary>
+            Construct given a base constraint
+            </summary>
+            <param name="resolvable"></param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.#ctor(System.Type,NUnit.Framework.Constraints.Constraint)">
+            <summary>
+            Constructs an AttributeConstraint for a specified attriute
+            Type and base constraint.
+            </summary>
+            <param name="type"></param>
+            <param name="baseConstraint"></param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.Matches(System.Object)">
+            <summary>
+            Determines whether the Type or other provider has the 
+            expected attribute and if its value matches the
+            additional constraint specified.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Writes a description of the attribute to the specified writer.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Writes the actual value supplied to the specified writer.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AttributeConstraint.GetStringRepresentation">
+            <summary>
+            Returns a string representation of the constraint.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.BasicConstraint">
+            <summary>
+            BasicConstraint is the abstract base for constraints that
+            perform a simple comparison to a constant value.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.BasicConstraint.#ctor(System.Object,System.String)">
+            <summary>
+            Initializes a new instance of the <see cref="T:BasicConstraint"/> class.
+            </summary>
+            <param name="expected">The expected.</param>
+            <param name="description">The description.</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.BasicConstraint.Matches(System.Object)">
+            <summary>
+            Test whether the constraint is satisfied by a given value
+            </summary>
+            <param name="actual">The value to be tested</param>
+            <returns>True for success, false for failure</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.BasicConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write the constraint description to a MessageWriter
+            </summary>
+            <param name="writer">The writer on which the description is displayed</param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.NullConstraint">
+            <summary>
+            NullConstraint tests that the actual value is null
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.NullConstraint.#ctor">
+            <summary>
+            Initializes a new instance of the <see cref="T:NullConstraint"/> class.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.TrueConstraint">
+            <summary>
+            TrueConstraint tests that the actual value is true
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.TrueConstraint.#ctor">
+            <summary>
+            Initializes a new instance of the <see cref="T:TrueConstraint"/> class.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.FalseConstraint">
+            <summary>
+            FalseConstraint tests that the actual value is false
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.FalseConstraint.#ctor">
+            <summary>
+            Initializes a new instance of the <see cref="T:FalseConstraint"/> class.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.NaNConstraint">
+            <summary>
+            NaNConstraint tests that the actual value is a double or float NaN
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.NaNConstraint.Matches(System.Object)">
+            <summary>
+            Test that the actual value is an NaN
+            </summary>
+            <param name="actual"></param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.NaNConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write the constraint description to a specified writer
+            </summary>
+            <param name="writer"></param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.BinaryConstraint">
+            <summary>
+            BinaryConstraint is the abstract base of all constraints
+            that combine two other constraints in some fashion.
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.BinaryConstraint.left">
+            <summary>
+            The first constraint being combined
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.BinaryConstraint.right">
+            <summary>
+            The second constraint being combined
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.BinaryConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+            <summary>
+            Construct a BinaryConstraint from two other constraints
+            </summary>
+            <param name="left">The first constraint</param>
+            <param name="right">The second constraint</param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.AndConstraint">
+            <summary>
+            AndConstraint succeeds only if both members succeed.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AndConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+            <summary>
+            Create an AndConstraint from two other constraints
+            </summary>
+            <param name="left">The first constraint</param>
+            <param name="right">The second constraint</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AndConstraint.Matches(System.Object)">
+            <summary>
+            Apply both member constraints to an actual value, succeeding 
+            succeeding only if both of them succeed.
+            </summary>
+            <param name="actual">The actual value</param>
+            <returns>True if the constraints both succeeded</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write a description for this contraint to a MessageWriter
+            </summary>
+            <param name="writer">The MessageWriter to receive the description</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.AndConstraint.WriteActualValueTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write the actual value for a failing constraint test to a
+            MessageWriter. The default implementation simply writes
+            the raw value of actual, leaving it to the writer to
+            perform any formatting.
+            </summary>
+            <param name="writer">The writer on which the actual value is displayed</param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.OrConstraint">
+            <summary>
+            OrConstraint succeeds if either member succeeds
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.OrConstraint.#ctor(NUnit.Framework.Constraints.Constraint,NUnit.Framework.Constraints.Constraint)">
+            <summary>
+            Create an OrConstraint from two other constraints
+            </summary>
+            <param name="left">The first constraint</param>
+            <param name="right">The second constraint</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.OrConstraint.Matches(System.Object)">
+            <summary>
+            Apply the member constraints to an actual value, succeeding 
+            succeeding as soon as one of them succeeds.
+            </summary>
+            <param name="actual">The actual value</param>
+            <returns>True if either constraint succeeded</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.OrConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write a description for this contraint to a MessageWriter
+            </summary>
+            <param name="writer">The MessageWriter to receive the description</param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionConstraint">
+            <summary>
+            CollectionConstraint is the abstract base class for
+            constraints that operate on collections.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor">
+            <summary>
+            Construct an empty CollectionConstraint
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.#ctor(System.Object)">
+            <summary>
+            Construct a CollectionConstraint
+            </summary>
+            <param name="arg"></param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.IsEmpty(System.Collections.IEnumerable)">
+            <summary>
+            Determines whether the specified enumerable is empty.
+            </summary>
+            <param name="enumerable">The enumerable.</param>
+            <returns>
+            	<c>true</c> if the specified enumerable is empty; otherwise, <c>false</c>.
+            </returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.Matches(System.Object)">
+            <summary>
+            Test whether the constraint is satisfied by a given value
+            </summary>
+            <param name="actual">The value to be tested</param>
+            <returns>True for success, false for failure</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionConstraint.doMatch(System.Collections.IEnumerable)">
+            <summary>
+            Protected method to be implemented by derived classes
+            </summary>
+            <param name="collection"></param>
+            <returns></returns>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionItemsEqualConstraint">
+            <summary>
+            CollectionItemsEqualConstraint is the abstract base class for all
+            collection constraints that apply some notion of item equality
+            as a part of their operation.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor">
+            <summary>
+            Construct an empty CollectionConstraint
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.#ctor(System.Object)">
+            <summary>
+            Construct a CollectionConstraint
+            </summary>
+            <param name="arg"></param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using(System.Collections.IComparer)">
+            <summary>
+            Flag the constraint to use the supplied IComparer object.
+            </summary>
+            <param name="comparer">The IComparer object to use.</param>
+            <returns>Self.</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using``1(System.Collections.Generic.IComparer{``0})">
+            <summary>
+            Flag the constraint to use the supplied IComparer object.
+            </summary>
+            <param name="comparer">The IComparer object to use.</param>
+            <returns>Self.</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using``1(System.Comparison{``0})">
+            <summary>
+            Flag the constraint to use the supplied Comparison object.
+            </summary>
+            <param name="comparer">The IComparer object to use.</param>
+            <returns>Self.</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using(System.Collections.IEqualityComparer)">
+            <summary>
+            Flag the constraint to use the supplied IEqualityComparer object.
+            </summary>
+            <param name="comparer">The IComparer object to use.</param>
+            <returns>Self.</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Using``1(System.Collections.Generic.IEqualityComparer{``0})">
+            <summary>
+            Flag the constraint to use the supplied IEqualityComparer object.
+            </summary>
+            <param name="comparer">The IComparer object to use.</param>
+            <returns>Self.</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.ItemsEqual(System.Object,System.Object)">
+            <summary>
+            Compares two collection members for equality
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.Tally(System.Collections.IEnumerable)">
+            <summary>
+            Return a new CollectionTally for use in making tests
+            </summary>
+            <param name="c">The collection to be included in the tally</param>
+        </member>
+        <member name="P:NUnit.Framework.Constraints.CollectionItemsEqualConstraint.IgnoreCase">
+            <summary>
+            Flag the constraint to ignore case and return self.
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.EmptyCollectionConstraint">
+            <summary>
+            EmptyCollectionConstraint tests whether a collection is empty. 
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.EmptyCollectionConstraint.doMatch(System.Collections.IEnumerable)">
+            <summary>
+            Check that the collection is empty
+            </summary>
+            <param name="collection"></param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.EmptyCollectionConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write the constraint description to a MessageWriter
+            </summary>
+            <param name="writer"></param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.UniqueItemsConstraint">
+            <summary>
+            UniqueItemsConstraint tests whether all the items in a 
+            collection are unique.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.UniqueItemsConstraint.doMatch(System.Collections.IEnumerable)">
+            <summary>
+            Check that all items are unique.
+            </summary>
+            <param name="actual"></param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.UniqueItemsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write a description of this constraint to a MessageWriter
+            </summary>
+            <param name="writer"></param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionContainsConstraint">
+            <summary>
+            CollectionContainsConstraint is used to test whether a collection
+            contains an expected object as a member.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.#ctor(System.Object)">
+            <summary>
+            Construct a CollectionContainsConstraint
+            </summary>
+            <param name="expected"></param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.doMatch(System.Collections.IEnumerable)">
+            <summary>
+            Test whether the expected item is contained in the collection
+            </summary>
+            <param name="actual"></param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionContainsConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write a descripton of the constraint to a MessageWriter
+            </summary>
+            <param name="writer"></param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionEquivalentConstraint">
+            <summary>
+            CollectionEquivalentCOnstraint is used to determine whether two
+            collections are equivalent.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.#ctor(System.Collections.IEnumerable)">
+            <summary>
+            Construct a CollectionEquivalentConstraint
+            </summary>
+            <param name="expected"></param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.doMatch(System.Collections.IEnumerable)">
+            <summary>
+            Test whether two collections are equivalent
+            </summary>
+            <param name="actual"></param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionEquivalentConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write a description of this constraint to a MessageWriter
+            </summary>
+            <param name="writer"></param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionSubsetConstraint">
+            <summary>
+            CollectionSubsetConstraint is used to determine whether
+            one collection is a subset of another
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.#ctor(System.Collections.IEnumerable)">
+            <summary>
+            Construct a CollectionSubsetConstraint
+            </summary>
+            <param name="expected">The collection that the actual value is expected to be a subset of</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.doMatch(System.Collections.IEnumerable)">
+            <summary>
+            Test whether the actual collection is a subset of 
+            the expected collection provided.
+            </summary>
+            <param name="actual"></param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionSubsetConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write a description of this constraint to a MessageWriter
+            </summary>
+            <param name="writer"></param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionOrderedConstraint">
+            <summary>
+            CollectionOrderedConstraint is used to test whether a collection is ordered.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.#ctor">
+            <summary>
+            Construct a CollectionOrderedConstraint
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.Using(System.Collections.IComparer)">
+            <summary>
+            Modifies the constraint to use an IComparer and returns self.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.Using``1(System.Collections.Generic.IComparer{``0})">
+            <summary>
+            Modifies the constraint to use an IComparer&lt;T&gt; and returns self.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.Using``1(System.Comparison{``0})">
+            <summary>
+            Modifies the constraint to use a Comparison&lt;T&gt; and returns self.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.By(System.String)">
+            <summary>
+            Modifies the constraint to test ordering by the value of
+            a specified property and returns self.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.doMatch(System.Collections.IEnumerable)">
+            <summary>
+            Test whether the collection is ordered
+            </summary>
+            <param name="actual"></param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write a description of the constraint to a MessageWriter
+            </summary>
+            <param name="writer"></param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionOrderedConstraint.GetStringRepresentation">
+            <summary>
+            Returns the string representation of the constraint.
+            </summary>
+            <returns></returns>
+        </member>
+        <member name="P:NUnit.Framework.Constraints.CollectionOrderedConstraint.Descending">
+            <summary>
+             If used performs a reverse comparison
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.CollectionTally">
+            <summary>
+            CollectionTally counts (tallies) the number of
+            occurences of each object in one or more enumerations.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionTally.#ctor(NUnit.Framework.Constraints.NUnitEqualityComparer,System.Collections.IEnumerable)">
+            <summary>
+            Construct a CollectionTally object from a comparer and a collection
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionTally.TryRemove(System.Object)">
+            <summary>
+            Try to remove an object from the tally
+            </summary>
+            <param name="o">The object to remove</param>
+            <returns>True if successful, false if the object was not found</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.CollectionTally.TryRemove(System.Collections.IEnumerable)">
+            <summary>
+            Try to remove a set of objects from the tally
+            </summary>
+            <param name="c">The objects to remove</param>
+            <returns>True if successful, false if any object was not found</returns>
+        </member>
+        <member name="P:NUnit.Framework.Constraints.CollectionTally.Count">
+            <summary>
+            The number of objects remaining in the tally
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.ComparisonAdapter">
+            <summary>
+            ComparisonAdapter class centralizes all comparisons of
+            values in NUnit, adapting to the use of any provided
+            IComparer, IComparer&lt;T&gt; or Comparison&lt;T&gt;
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.For(System.Collections.IComparer)">
+            <summary>
+            Returns a ComparisonAdapter that wraps an IComparer
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.For``1(System.Collections.Generic.IComparer{``0})">
+            <summary>
+            Returns a ComparisonAdapter that wraps an IComparer&lt;T&gt;
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.For``1(System.Comparison{``0})">
+            <summary>
+            Returns a ComparisonAdapter that wraps a Comparison&lt;T&gt;
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.Compare(System.Object,System.Object)">
+            <summary>
+            Compares two objects
+            </summary>
+        </member>
+        <member name="P:NUnit.Framework.Constraints.ComparisonAdapter.Default">
+            <summary>
+            Gets the default ComparisonAdapter, which wraps an
+            NUnitComparer object.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter.#ctor(System.Collections.IComparer)">
+            <summary>
+            Construct a ComparisonAdapter for an IComparer
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter.Compare(System.Object,System.Object)">
+            <summary>
+            Compares two objects
+            </summary>
+            <param name="expected"></param>
+            <param name="actual"></param>
+            <returns></returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.DefaultComparisonAdapter.#ctor">
+            <summary>
+            Construct a default ComparisonAdapter
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter`1">
+            <summary>
+            ComparisonAdapter&lt;T&gt; extends ComparisonAdapter and
+            allows use of an IComparer&lt;T&gt; or Comparison&lt;T&gt;
+            to actually perform the comparison.
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter`1.#ctor(System.Collections.Generic.IComparer{`0})">
+            <summary>
+            Construct a ComparisonAdapter for an IComparer&lt;T&gt;
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparerAdapter`1.Compare(System.Object,System.Object)">
+            <summary>
+            Compare a Type T to an object
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparisonAdapterForComparison`1.#ctor(System.Comparison{`0})">
+            <summary>
+            Construct a ComparisonAdapter for a Comparison&lt;T&gt;
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonAdapter.ComparisonAdapterForComparison`1.Compare(System.Object,System.Object)">
+            <summary>
+            Compare a Type T to an object
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.ComparisonConstraint">
+            <summary>
+            Abstract base class for constraints that compare values to
+            determine if one is greater than, equal to or less than
+            the other.
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.expected">
+            <summary>
+            The value against which a comparison is to be made
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.ltOK">
+            <summary>
+            If true, less than returns success
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.eqOK">
+            <summary>
+            if true, equal returns success
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.gtOK">
+            <summary>
+            if true, greater than returns success
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.predicate">
+            <summary>
+            The predicate used as a part of the description
+            </summary>
+        </member>
+        <member name="F:NUnit.Framework.Constraints.ComparisonConstraint.comparer">
+            <summary>
+            ComparisonAdapter to be used in making the comparison
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.#ctor(System.Object,System.Boolean,System.Boolean,System.Boolean,System.String)">
+            <summary>
+            Initializes a new instance of the <see cref="T:ComparisonConstraint"/> class.
+            </summary>
+            <param name="value">The value against which to make a comparison.</param>
+            <param name="ltOK">if set to <c>true</c> less succeeds.</param>
+            <param name="eqOK">if set to <c>true</c> equal succeeds.</param>
+            <param name="gtOK">if set to <c>true</c> greater succeeds.</param>
+            <param name="predicate">String used in describing the constraint.</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Matches(System.Object)">
+            <summary>
+            Test whether the constraint is satisfied by a given value
+            </summary>
+            <param name="actual">The value to be tested</param>
+            <returns>True for success, false for failure</returns>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.WriteDescriptionTo(NUnit.Framework.Constraints.MessageWriter)">
+            <summary>
+            Write the constraint description to a MessageWriter
+            </summary>
+            <param name="writer">The writer on which the description is displayed</param>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Using(System.Collections.IComparer)">
+            <summary>
+            Modifies the constraint to use an IComparer and returns self
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Using``1(System.Collections.Generic.IComparer{``0})">
+            <summary>
+            Modifies the constraint to use an IComparer&lt;T&gt; and returns self
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.ComparisonConstraint.Using``1(System.Comparison{``0})">
+            <summary>
+            Modifies the constraint to use a Comparison&lt;T&gt; and returns self
+            </summary>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.GreaterThanConstraint">
+            <summary>
+            Tests whether a value is greater than the value supplied to its constructor
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.GreaterThanConstraint.#ctor(System.Object)">
+            <summary>
+            Initializes a new instance of the <see cref="T:GreaterThanConstraint"/> class.
+            </summary>
+            <param name="expected">The expected value.</param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.GreaterThanOrEqualConstraint">
+            <summary>
+            Tests whether a value is greater than or equal to the value supplied to its constructor
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.GreaterThanOrEqualConstraint.#ctor(System.Object)">
+            <summary>
+            Initializes a new instance of the <see cref="T:GreaterThanOrEqualConstraint"/> class.
+            </summary>
+            <param name="expected">The expected value.</param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.LessThanConstraint">
+            <summary>
+            Tests whether a value is less than the value supplied to its constructor
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.LessThanConstraint.#ctor(System.Object)">
+            <summary>
+            Initializes a new instance of the <see cref="T:LessThanConstraint"/> class.
+            </summary>
+            <param name="expected">The expected value.</param>
+        </member>
+        <member name="T:NUnit.Framework.Constraints.LessThanOrEqualConstraint">
+            <summary>
+            Tests whether a value is less than or equal to the value supplied to its constructor
+            </summary>
+        </member>
+        <member name="M:NUnit.Framework.Constraints.LessThanOrEqualConstraint.#ctor(System.Object)">
+            <summary>
+            Initializes a new instance of the <see cref="T:LessThanOrEqualConstraint"/> class.

[... 8492 lines stripped ...]


Mime
View raw message