jmeter-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Scott Dean <psd...@ncsu.edu>
Subject Re: getting error when loading a results file; how do I get more details?
Date Wed, 08 Mar 2017 21:54:32 GMT
The transaction controller "voucher nav/create/submit" has neither
"Generate parent sample" nor "Included duration of timer and pre-post
processors in generated sample" checked.  It does contain 5 sub transaction
controlers that have "Generate parent sample" checked, 1 sub transaction
controller without "Generate parent sample" checked, and two Test Actions
set to Pause (duration = 0), which contain Uniform Random Timers (to
represent "think time").  All in all within the contained sub transaction
controllers, there are about 200 HTTP Request samplers.

Is that the info you are looking for?

Thanks!

-- Scott Dean

On Wed, Mar 8, 2017 at 3:43 PM, Philippe Mouawad <philippe.mouawad@gmail.com
> wrote:

> Hello,
> How does the corresponding Transaction Controller look like ? Which fields
> did you check ?
> Thanks
>
> On Tue, Mar 7, 2017 at 10:57 PM, Scott Dean <psdean@ncsu.edu> wrote:
>
> > In line
> > >
> > > 1487361334636,301358,Voucher nav/create/submit,,"Number of samples in
> > > transaction : 23, number of failing samples : 0",,false,0,0,0,0,0,1,1,
> > > NCSU202LRG11,0,0
> >
> >
> > after "number of failing samples : 0", the next field is empty followed
> by
> > false then a bunch of 0s.  The empty field should contain the thread name
> > value which should  be something like "voucher fluid TG 4-14".  In
> addition
> > the values after "false" should be numbers other than zero.
> >
> > Thanks
> >
> > -- Scott Dean
> >
> >
> > On Tue, Mar 7, 2017 at 3:01 PM, Philippe Mouawad <
> > philippe.mouawad@gmail.com
> > > wrote:
> >
> > > Hi Scott,
> > > What is missing in the lines below ?
> > >
> > > Can you show a "complete" line and an "incomplete" line from your point
> > of
> > > view ?
> > >
> > > Thank you
> > > Regards
> > >
> > > On Tue, Mar 7, 2017 at 2:46 PM, Scott Dean <psdean@ncsu.edu> wrote:
> > >
> > > > My corruption occurred in the middle of the file and the test was not
> > > > interrupted.  It ran continuously for the 3hr 36 minutes that it was
> > > > scheduled for.  As for interrupting a test with Ctrl-C and restarting
> > it
> > > > using the same CSV results file, I would not be surprised to have
> > > > corruption, and even expect it, under those conditions.
> > > >
> > > > Regarding the corruption, the line appears to be complete in that it
> > has
> > > > all the fields represented.  What is missing is the values as shown
> > > below.
> > > >   This is an excerpt from the results file with the two lines that
> > > preceded
> > > > it and the two lines that followed:
> > > >
> > > > 1487361635421,107,Portal display login page 240,200,"Number of
> samples
> > in
> > > > >> transaction : 9, number of failing samples : 0",background TG
> > > > >> 1-10,true,98122,9884,80,185,0,1,0,NCSU202LRG11,3,0
> > > > >
> > > > > 1487361632433,3189,Voucher Navbar 415,200,"Number of samples in
> > > > >> transaction : 23, number of failing samples : 0",voucher fluid
TG
> > > > >> 4-4,true,106343,114891,15,185,0,1,0,NCSU202LRG11,6,0
> > > > >
> > > > > 1487361334636,301358,Voucher nav/create/submit,,"Number of samples
> in
> > > > >> transaction : 23, number of failing samples :
> > > > >> 0",,false,0,0,0,0,0,1,1,NCSU202LRG11,0,0
> > > > >
> > > > > 1487361289503,321134,Voucher fluid package,,"Number of samples in
> > > > >> transaction : 132, number of failing samples : 0",voucher fluid
TG
> > > > >> 4-14,false,413053,404133,15,185,133,1,1,NCSU202LRG11,25357,1
> > > > >
> > > > > 1487361334636,301352,Voucher Navbar 415,502,"Number of samples in
> > > > >> transaction : 23, number of failing samples : 1",voucher fluid
TG
> > > > >> 4-14,false,93924,112116,15,185,0,1,1,NCSU202LRG11,6,0
> > > > >
> > > > >
> > > > > All the lines came from the same remote server (NCSU202LRG11).
> > > >
> > > > Hope this helps!
> > > >
> > > > -- Scott Dean
> > > >
> > > >
> > > > On Tue, Mar 7, 2017 at 2:46 AM, Felix Schumacher <
> > > > felix.schumacher@internetallee.de> wrote:
> > > >
> > > > >
> > > > >
> > > > > Am 7. März 2017 05:03:58 MEZ schrieb Scott Dean <psdean@ncsu.edu>:
> > > > > >I am using java 1.8.0_121 on Windows 2008r2 x64.
> > > > > >
> > > > > >Regarding the test plan, I need to scrub the plan of sensitive
> data
> > > > > >before
> > > > > >I can upload it.
> > > > >
> > > > > I have looked into my test results, that showed CSV corruption.
> > > > >
> > > > > The easiest and only way I could reproduce those was by stopping
a
> > > > running
> > > > > test with Ctrl-c and restarting them using the same CSV file.
> > > > >
> > > > > The stopping could leave the last line incomplete and the next run
> > > would
> > > > > fill it with new results, leaving the line still corrupt.
> > > > >
> > > > > So on my end there was no concurrency issue, but rather a test end
> > > issue.
> > > > >
> > > > > Could your corruption have the same origin?
> > > > >
> > > > > Felix
> > > > >
> > > > > >
> > > > > >Just to be clear, the test plan was actually executed on four
> remote
> > > > > >servers via the command line with the name of the results file
> > > > > >specified as
> > > > > >a commandline parameter and located on a network file share.
 It
> is
> > > not
> > > > > >clear to me if each remote server instance wrote its own data
to
> the
> > > > > >results file or if the data was passed back to the jmeter master
> > > > > >instance
> > > > > >for the master to actually write to the results file.  In
> addition,
> > I
> > > > > >was
> > > > > >loadtesting as part of an application upgrade project where we
are
> > > also
> > > > > >moving from Solaris-based servers to linux-based servers.  I
was
> > > > > >loadtesting against upgraded application and my time windows
for
> > > > > >running
> > > > > >tests has expired.  The system has wiped and rebuilt in
> preparation
> > > for
> > > > > >going live later this week.  I cannot go back and retest anything
> at
> > > > > >this
> > > > > >point.
> > > > > >
> > > > > >Thanks!
> > > > > >
> > > > > >-- Scott Dean
> > > > > >   NC State University
> > > > > >
> > > > > >On Sat, Mar 4, 2017 at 4:34 PM, Philippe Mouawad
> > > > > ><philippe.mouawad@gmail.com
> > > > > >> wrote:
> > > > > >
> > > > > >> Hi Again,
> > > > > >> Could you also tell which JVM you're using and which version
?
> > > > > >> Thank you
> > > > > >> Regards
> > > > > >>
> > > > > >> On Sat, Mar 4, 2017 at 10:14 PM, Philippe Mouawad <
> > > > > >> philippe.mouawad@gmail.com> wrote:
> > > > > >>
> > > > > >> > Hello,
> > > > > >> > Would it be possible to upload your test plan to Bug
60818?
> > > > > >> >
> > > > > >> > We'd like to understand how this occured.
> > > > > >> > It may be a bug , but it may also be due to your test
plan.
> > > > > >> >
> > > > > >> > Regards
> > > > > >> >
> > > > > >> > On Thu, Mar 2, 2017 at 5:02 PM, Scott Dean <psdean@ncsu.edu>
> > > wrote:
> > > > > >> >
> > > > > >> >> Found the problem.  It was a data error in the
.csv results
> > file.
> > > > > >One
> > > > > >> of
> > > > > >> >> the lines did not have a value for Group Name and
this caused
> > the
> > > > > >import
> > > > > >> >> to
> > > > > >> >> fail when there was no value to add to the append
to the
> label
> > > > > >value.
> > > > > >> No
> > > > > >> >> clue why there was no thread group name for the
record or how
> > to
> > > > > >> reproduce
> > > > > >> >> the bad result data.
> > > > > >> >>
> > > > > >> >> -- Scott Dean
> > > > > >> >>    North Carolina State University
> > > > > >> >>
> > > > > >> >> On Wed, Mar 1, 2017 at 11:58 AM, Scott Dean <psdean@ncsu.edu
> >
> > > > > >wrote:
> > > > > >> >>
> > > > > >> >> > I have run my tests in non-gui mode and generated
a results
> > > > > >file.  I
> > > > > >> am
> > > > > >> >> > now trying to pull the results into a summary
report
> listener
> > > > > >and
> > > > > >> >> getting a
> > > > > >> >> > error message in Result File Loader: "Error
loading result
> > file
> > > > > >-- see
> > > > > >> >> log
> > > > > >> >> > file".  When I look in the jmeter.log file,
all I see is
> > "WARN
> > > -
> > > > > >> >> > jmeter.reporters.ResultCollector: Problem
reading JTL:
> <name
> > > of
> > > > > >the
> > > > > >> >> > file>".  I am assuming that this is the
log file I am
> > supposed
> > > > > >to look
> > > > > >> >> in.
> > > > > >> >> > In addition, I get the error when "Include
group name in
> > > label?"
> > > > > >is
> > > > > >> >> checked
> > > > > >> >> > but I do not  when that setting is not checked.
> > > > > >> >> >
> > > > > >> >> >  Is there anything I can do to get more info
about the
> error,
> > > > > >like a
> > > > > >> >> > setting that will give more verbose log output?
 I am
> running
> > > > > >jmeter
> > > > > >> >> with a
> > > > > >> >> > heap size of 2048m and the result file is
81.6 MB.
> > > > > >> >> >
> > > > > >> >> > Thanks
> > > > > >> >> >
> > > > > >> >> > -- Scott Dean
> > > > > >> >> >    North Carolina State University
> > > > > >> >> >    Raleigh NC.
> > > > > >> >> >
> > > > > >> >>
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > --
> > > > > >> > Cordialement.
> > > > > >> > Philippe Mouawad.
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >>
> > > > > >>
> > > > > >> --
> > > > > >> Cordialement.
> > > > > >> Philippe Mouawad.
> > > > > >>
> > > > >
> > > > > ------------------------------------------------------------
> > ---------
> > > > > To unsubscribe, e-mail: user-unsubscribe@jmeter.apache.org
> > > > > For additional commands, e-mail: user-help@jmeter.apache.org
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Cordialement.
> > > Philippe Mouawad.
> > >
> >
>
>
>
> --
> Cordialement.
> Philippe Mouawad.
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message