jmeter-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Tech Newbie <tec...@yahoo.com>
Subject Re: ThreadGroup start and end time in date format
Date Tue, 06 Oct 2009 15:13:05 GMT
Yes.  I am guessing that must be what most users do; schedule a cron job that invokes a script
that invokes JMeter with "run now".

I was just exploring if there are other options since I'm new at JMeter.

--- On Mon, 10/5/09, Deepak Shetty <shettyd@gmail.com> wrote:

From: Deepak Shetty <shettyd@gmail.com>
Subject: Re: ThreadGroup start and end time in date format
To: "JMeter Users List" <jmeter-user@jakarta.apache.org>
Date: Monday, October 5, 2009, 8:53 PM

why not use the OS scheduling capabilities for these requirements?.
You need a way to startup jmeter anyway (irrespective of the threadgroup
scheduler)

regards
deepak

On Mon, Oct 5, 2009 at 1:51 PM, Tech Newbie <technb@yahoo.com> wrote:

> The use case I'm trying to cover is "Let's run the test at 2am tonight".
> If a SimpleDateFormat is supported, then it's a bit more intuitive to pass
> in a human readable date than the calculated the difference (number of
> seconds) between now and 2am or the Unix Epoch time.
>
> Let me know if I'm missing something.
>
> --- On Mon, 10/5/09, sebb <sebbaz@gmail.com> wrote:
>
> From: sebb <sebbaz@gmail.com>
> Subject: Re: ThreadGroup start and end time in date format
> To: "JMeter Users List" <jmeter-user@jakarta.apache.org>
> Date: Monday, October 5, 2009, 7:32 PM
>
> On 05/10/2009, Tech Newbie <technb@yahoo.com> wrote:
> > Thanks for the clarification.  So I am curious as to how to define a
> specific start time (as opposed to "now") in non-gui mode from a shell
> script..  I have managed to leverage the unix date command and calculated
> the epoch in ms that way, but it's a bit clunky, relying on the correct date
> format.  Then I passed the calculated epoch into JMeter as a property
> defined in my test plan.
> >
> >  Is this the best practice?  How do other users do this (or everyone just
> uses "now") ?
> >
> >   I was hoping there is something similar to a "--date" command line
> option accepting a SimpleDateFormat.
> >
> >  Just want to make sure I didn't miss an obvious or more straight-forward
> solution.
>
> If you can easily calculate the time difference, why not use a
> property to define the startup delay, and pass that in instead?
>
> >
> >  --- On Fri, 10/2/09, sebb <sebbaz@gmail.com> wrote:
> >
> >  From: sebb <sebbaz@gmail.com>
> >  Subject: Re: ThreadGroup start and end time in date format
> >  To: "JMeter Users List" <jmeter-user@jakarta.apache.org>
> >
> > Date: Friday, October 2, 2009, 9:50 PM
> >
> >
> >  On 02/10/2009, Tech Newbie <technb@yahoo.com> wrote:
> >  > Does this mean the timestamp format in jmeter.properties applies to
> both the csv output
> >  >  AND parsing a thread group's start_time property?  This is what I
> have:
> >
> >  No it doesn't apply to the start_time property.
> >
> >  Sorry, I misread your original question.
> >
> >  You can only use milliseconds in the JMX file.
> >
> >  >  jmeter.save.saveservice.timestamp_format=yyyy/MM/dd HH:mm:ss
> >  >
> >  >  and in my test plan:
> >  >  <stringProp
> name="ThreadGroup.start_time">${__P(submit_start,1254374051000)}</stringProp>
> >  >
> >  >  But when I invoke jmeter:
> >  >  ../jmeter -n -t ./HelloWorld.jmx -l ./HelloWorld.jtl
> -Jsubmit_start="2009/10/02 13:42:11"
> >  >  An error occurred: Unknown arg: 13:42:11"
> >  >
> >  >  Look like the error is caused by the space between the date and time
> eventhough the value is quoted.
> >  >
> >  >  Is this possible or do I have to resort to epoch?
> >  >
> >  >  --- On Fri, 10/2/09, sebb <sebbaz@gmail.com> wrote:
> >  >
> >  >  From: sebb <sebbaz@gmail.com>
> >  >  Subject: Re: ThreadGroup start and end time in date format
> >  >  To: "JMeter Users List" <jmeter-user@jakarta.apache.org>
> >  >  Date: Friday, October 2, 2009, 8:52 AM
> >  >
> >  >
> >  >  On 02/10/2009, Tech Newbie <technb@yahoo.com> wrote:
> >  >  > Let me clarify that the question is regarding defining the start
> and end time in the test plan (i.e. not in the gui).
> >  >  >
> >  >  >  In my test plan:
> >  >  >          <longProp
> name="ThreadGroup.start_time">1243889520000</longProp>
> >  >  >          <longProp
> name="ThreadGroup.end_time">1243889499000</longProp>
> >  >  >
> >  >  >  Can I use string for SimpleDateFormat instead?
> >  >
> >  >  Not when using XML format. However, in CSV format you can, see
> >  >
> >  >  jmeter.save.saveservice.timestamp
> >  >
> >  >  >  --- On Fri, 10/2/09, Tech Newbie <technb@yahoo.com> wrote:
> >  >  >
> >  >  >  From: Tech Newbie <technb@yahoo.com>
> >  >  >  Subject: ThreadGroup start and end time in date format
> >  >  >  To: jmeter-user@jakarta.apache.org
> >  >  >  Date: Friday, October 2, 2009, 5:37 AM
> >  >  >
> >  >  >
> >  >  >  Is it possible to specify thread group start and end time in
> SimpleDateFormat instead of epoch?  Similar to how result timestamps support
> both formats.
> >  >  >
> >  >  >  Thanks.
> >  >  >
> >  >  >
> >  >  >
> >  >  >
> >  >  >
> >  >  >
> >  >  >
> >  >  >
> >  >
> >  >
> >  > ---------------------------------------------------------------------
> >  >  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> >  >  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >  >
> >  >
> >  >
> >  >
> >  >
> >
> >  ---------------------------------------------------------------------
> >  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> >  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
> >
> >
> >
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
> For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>
>
>
>



      
Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message