jmeter-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From sebb <seb...@gmail.com>
Subject Re: simultaneous http requests
Date Mon, 01 Sep 2008 09:58:52 GMT
On 01/09/2008, Jeremy Quinton <jeremy.quinton@emea.playphone.com> wrote:
> What you have said will work fine if the http requests take less than
>  5000(ms).
>
>  The only problem is that if the first http request in your example
>  takes longer than 5000(ms)e.g. It takes 3000(ms) then the next http
>  request will only run 8 seconds later(Delay of 5000(ms) + the response
>  time
>  of the first http request).
>
>  I have the option retrieve all embedded resources from html files ticked
>  (Which are additional http requests).
>
>  It would be great if it was possible to jmeter to make the second http
>  request even if the first one is not finished. This is possible to do
>  by adding an additional thread group but then the http requests start
>  to overlap one another.
>

There are no plans to extend JMeter to allow parallel http requests
within a single thread.

JMeter has multiple threads and thread groups which allow parallel operations.

To configure JMeter, decide what load the server needs to see, and set
JMeter up accordingly.

>  Regards
>
> Jeremy
>
>
>  -----Original Message-----
>  From: Mathumathi Palani Bommu, EAS-Chennai [mailto:mathumathip@hcl.in]
>  Sent: 30 August 2008 07:28
>  To: JMeter Users List
>  Subject: RE: simultaneous http requests
>
>
>  Hi
>
>  U can configure your test plan like this
>
>  ThreadGroup
>         -- Your Http request
>         --constant timer value set to 5000(ms)
>         -- Your Second Http request
>  Note : please clear the Ramp up duration and set as blank
>  Loop count is 1
>  No of threads(users): set ur desired value
>
>  And try
>
>  It worked for me
>
>  This is the value
>  1       11:53:53.734    Thread Group 1-1        HTTP Request    109
>  Success 15638
>  2       11:53:58.843    Thread Group 1-1        HTTP Request    47
>  Success 15638
>
>
>  You can give a try to Webload opensource tool if needed
>
>  Regards
>  Mathu
>  -----Original Message-----
>  From: Jeremy Quinton [mailto:jeremy.quinton@emea.playphone.com]
>  Sent: Friday, August 29, 2008 4:44 PM
>  To: JMeter Users List
>  Subject: RE: simultaneous http requests
>
>
>  I have adjusted the ramp up time it does not seem accurate.
>  I have also been through the documentation "building a web test plan".
>
>  I created another simple test with the following values.
>
>  Number of threads(users) 1
>  Ramp up period(in seconds) 10
>  Loop Count 1
>
>  Below the thread group I have two http requests.
>  If I run the test and view the results in table format
>  the start time of the requests is 3 and then 2.6 seconds apart.
>
>  What I want to achieve is measure throughput so 1 request every 5
>  seconds. Then at a later stage 1 request every 4 seconds etc.
>
>  This is sample data when I view results in a table format.
>
>  Sample 1
>  19      12:03:15.457
>  20      12:03:18.399
>  Sample 2
>  21      12:09:37.167
>  22      12:09:39.854
>
>  Thanks for yor help in advance.
>
>  Are there any other tools you could suggest I use that are
>  free/opensource
>  and similar to jmeter but have this functionality. Ive spent three days
>  Days on this tryig different combinations and values and still no luck.
>
>
>
>  -----Original Message-----
>  From: Ronan Klyne [mailto:ronan.klyne@groupbc.com]
>  Sent: 29 August 2008 11:35
>  To: JMeter Users List
>  Subject: Re: simultaneous http requests
>
>  Jeremy Quinton wrote:
>  > Hi
>  >
>  >
>  >
>  > I have setup a basic test to apply some load to a server.
>  >
>  > I have one thread group with multiple http requests.
>  >
>  >
>  >
>  > Viewing the results of the test in a table it looks like jmeter
>  >
>  > does a http request waits for it to finish and then does the next
>  > request.
>  >
>  >
>  >
>  > What I would like to do is
>  >
>  >
>  >
>  > Send an http request
>  >
>  > Wait 5 seconds (Used a constant timer)
>  >
>  > Send another request
>  >
>  > Wait 5 seconds.(Used a constant timer)
>  >
>
>  The option you're looking for is 'Ramp up time' on the Thread Group.
>
>  > The problem is that the second request will only start after the first
>  > request has completed
>  >
>  > + the delay of 5 seconds.
>  >
>  >
>  >
>  > Is this possible? Also is there anyway of searching the archives.
>  There
>  > is no search option
>  >
>  > and so I have to manual go through each question to see if my question
>  > has been asked
>  >
>  >
>  >
>  > Thanks
>  >
>  > Jeremy Quinton
>  >
>  >
>  >
>  >
>
>
>  --
>  Ronan Klyne
>  Business Collaborator Developer
>  Tel: +44 01189 028518
>  ronan.klyne@groupbc.com
>  www.groupbc.com
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>  DISCLAIMER:
>  ------------------------------------------------------------------------
>  -----------------------------------------------
>
>  The contents of this e-mail and any attachment(s) are confidential and
>  intended for the named recipient(s) only.
>  It shall not attach any liability on the originator or HCL or its
>  affiliates. Any views or opinions presented in
>  this email are solely those of the author and may not necessarily
>  reflect the opinions of HCL or its affiliates.
>  Any form of reproduction, dissemination, copying, disclosure,
>  modification, distribution and / or publication of
>  this message without the prior written consent of the author of this
>  e-mail is strictly prohibited. If you have
>  received this email in error please delete it and notify the sender
>  immediately. Before opening any mail and
>  attachments please check them for viruses and defect.
>
>  ------------------------------------------------------------------------
>  -----------------------------------------------
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
>  For additional commands, e-mail: jmeter-user-help@jakarta.apache.org
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: jmeter-user-unsubscribe@jakarta.apache.org
For additional commands, e-mail: jmeter-user-help@jakarta.apache.org


Mime
View raw message