incubator-ooo-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From er...@apache.org
Subject svn commit: r1162539 [1/3] - in /incubator/ooo/trunk/main: ./ filter/source/xsltfilter/ hunspell/ hyphen/ libwpd/ lingucomponent/source/hyphenator/altlinuxhyph/hyphen/ lingucomponent/source/lingutil/ lingucomponent/source/spellcheck/spell/ lingucompone...
Date Sun, 28 Aug 2011 15:46:32 GMT
Author: erack
Date: Sun Aug 28 15:46:31 2011
New Revision: 1162539

URL: http://svn.apache.org/viewvc?rev=1162539&view=rev
Log:
make copylefts an option

Based on original work by Mathias Bauer <mbauer@apache.org>

Modified:
    incubator/ooo/trunk/main/aclocal.m4
    incubator/ooo/trunk/main/configure
    incubator/ooo/trunk/main/configure.in
    incubator/ooo/trunk/main/filter/source/xsltfilter/makefile.mk
    incubator/ooo/trunk/main/hunspell/makefile.mk
    incubator/ooo/trunk/main/hyphen/makefile.mk
    incubator/ooo/trunk/main/libwpd/makefile.mk
    incubator/ooo/trunk/main/lingucomponent/source/hyphenator/altlinuxhyph/hyphen/makefile.mk
    incubator/ooo/trunk/main/lingucomponent/source/lingutil/makefile.mk
    incubator/ooo/trunk/main/lingucomponent/source/spellcheck/spell/makefile.mk
    incubator/ooo/trunk/main/lingucomponent/source/thesaurus/libnth/makefile.mk
    incubator/ooo/trunk/main/mythes/makefile.mk
    incubator/ooo/trunk/main/postprocess/packcomponents/makefile.mk
    incubator/ooo/trunk/main/rhino/makefile.mk
    incubator/ooo/trunk/main/saxon/makefile.mk
    incubator/ooo/trunk/main/scp2/source/ooo/file_library_ooo.scp
    incubator/ooo/trunk/main/scp2/source/ooo/file_ooo.scp
    incubator/ooo/trunk/main/scp2/source/ooo/makefile.mk
    incubator/ooo/trunk/main/set_soenv.in
    incubator/ooo/trunk/main/sw/prj/build.lst
    incubator/ooo/trunk/main/writerperfect/source/filter/makefile.mk
    incubator/ooo/trunk/main/writerperfect/source/stream/makefile.mk
    incubator/ooo/trunk/main/writerperfect/source/wpdimp/makefile.mk
    incubator/ooo/trunk/main/writerperfect/util/makefile.mk

Modified: incubator/ooo/trunk/main/aclocal.m4
URL: http://svn.apache.org/viewvc/incubator/ooo/trunk/main/aclocal.m4?rev=1162539&r1=1162538&r2=1162539&view=diff
==============================================================================
--- incubator/ooo/trunk/main/aclocal.m4 (original)
+++ incubator/ooo/trunk/main/aclocal.m4 Sun Aug 28 15:46:31 2011
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,122 +11,208 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-
-dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
-dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
-dnl also defines GSTUFF_PKG_ERRORS on error
-AC_DEFUN(PKG_CHECK_MODULES, [
-  succeeded=no
-
-  if test -z "$PKG_CONFIG"; then
-    AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
-  fi
-
-  if test "$PKG_CONFIG" = "no" ; then
-     echo "*** The pkg-config script could not be found. Make sure it is"
-     echo "*** in your path, or set the PKG_CONFIG environment variable"
-     echo "*** to the full path to pkg-config."
-     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
-  else
-     PKG_CONFIG_MIN_VERSION=0.9.0
-     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
-        AC_MSG_CHECKING(for $2)
-
-        if $PKG_CONFIG --exists "$2" ; then
-            AC_MSG_RESULT(yes)
-            succeeded=yes
-
-            AC_MSG_CHECKING($1_CFLAGS)
-            $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
-            AC_MSG_RESULT($$1_CFLAGS)
-
-            AC_MSG_CHECKING($1_LIBS)
-            $1_LIBS=`$PKG_CONFIG --libs "$2"`
-            AC_MSG_RESULT($$1_LIBS)
-        else
-            $1_CFLAGS=""
-            $1_LIBS=""
-            ## If we have a custom action on failure, don't print errors, but 
-            ## do set a variable so people can do so.
-            $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
-            ifelse([$4], ,echo $$1_PKG_ERRORS,)
+# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
+# serial 1 (pkg-config-0.24)
+# 
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists.  Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+# only at the first occurence in configure.ac, so if the first place
+# it's called might be skipped (such as if it is within an "if", you
+# have to call PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+   	AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2"
2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
         fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
 
-        AC_SUBST($1_CFLAGS)
-        AC_SUBST($1_LIBS)
-     else
-        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION
or newer."
-        echo "*** See http://www.freedesktop.org/software/pkgconfig"
-     fi
-  fi
+	m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
 
-  if test $succeeded = yes; then
-     ifelse([$3], , :, [$3])
-  else
-     ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the
PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config
can find them.]), [$4])
-  fi
-])
+$$1_PKG_ERRORS
 
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	$3
+fi[]dnl
+])# PKG_CHECK_MODULES
 
-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008, 2009
 # Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-
+# ---------------------------------------------------------------------------
 # Adds support for distributing Python modules and packages.  To
 # install modules, copy them to $(pythondir), using the python_PYTHON
 # automake variable.  To install a package with the same name as the
 # automake package, install to $(pkgpythondir), or use the
 # pkgpython_PYTHON automake variable.
-
+#
 # The variables $(pyexecdir) and $(pkgpyexecdir) are provided as
 # locations to install python extension modules (shared libraries).
 # Another macro is required to find the appropriate flags to compile
 # extension modules.
-
+#
 # If your package is configured with a different prefix to python,
 # users will have to add the install directory to the PYTHONPATH
 # environment variable, or create a .pth file (see the python
 # documentation for details).
-
+#
 # If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will
 # cause an error if the version of python installed on the system
 # doesn't meet the requirement.  MINIMUM-VERSION should consist of
 # numbers and dots only.
-
 AC_DEFUN([AM_PATH_PYTHON],
  [
-  dnl Find a Python interpreter.  Python versions prior to 1.5 are not
-  dnl supported because the default installation locations changed from
-  dnl $prefix/lib/site-python in 1.4 to $prefix/lib/python1.5/site-packages
-  dnl in 1.5.
-  m4_define([_AM_PYTHON_INTERPRETER_LIST],
-            [python python2 python2.6 python2.5 python2.4 python2.3 python2.2 dnl
-python2.1 python2.0 python1.6 python1.5])
+  dnl Find a Python interpreter.  Python versions prior to 2.0 are not
+  dnl supported. (2.0 was released on October 16, 2000).
+  m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
+                    [python python2 python3 python3.0 python2.5 python2.4 python2.3 python2.2
dnl
+python2.1 python2.0])
 
   m4_if([$1],[],[
     dnl No version check is needed.
     # Find any Python interpreter.
     if test -z "$PYTHON"; then
-      PYTHON=:
-      AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST)
+      AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)
     fi
     am_display_PYTHON=python
   ], [
@@ -167,7 +253,7 @@ python2.1 python2.0 python1.6 python1.5]
   dnl library.
 
   AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
-    [am_cv_python_version=`$PYTHON -c "import sys; print sys.version[[:3]]"`])
+    [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])
   AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
 
   dnl Use the values of $prefix and $exec_prefix for the corresponding
@@ -182,7 +268,7 @@ python2.1 python2.0 python1.6 python1.5]
   dnl to know which OS platform Python thinks this is.
 
   AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
-    [am_cv_python_platform=`$PYTHON -c "import sys; print sys.platform"`])
+    [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])
   AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
 
 
@@ -197,8 +283,29 @@ python2.1 python2.0 python1.6 python1.5]
   dnl doesn't work.
   AC_CACHE_CHECK([for $am_display_PYTHON script directory],
     [am_cv_python_pythondir],
-    [am_cv_python_pythondir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(0,0,prefix='$PYTHON_PREFIX')"
2>/dev/null ||
-     echo "$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages"`])
+    [if test "x$prefix" = xNONE
+     then
+       am_py_prefix=$ac_default_prefix
+     else
+       am_py_prefix=$prefix
+     fi
+     am_cv_python_pythondir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(0,0,prefix='$am_py_prefix'))"
2>/dev/null ||
+     echo "$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages"`
+     case $am_cv_python_pythondir in
+     $am_py_prefix*)
+       am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
+       am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
+       ;;
+     *)
+       case $am_py_prefix in
+         /usr|/System*) ;;
+         *)
+	  am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
+	  ;;
+       esac
+       ;;
+     esac
+    ])
   AC_SUBST([pythondir], [$am_cv_python_pythondir])
 
   dnl pkgpythondir -- $PACKAGE directory under pythondir.  Was
@@ -214,8 +321,29 @@ python2.1 python2.0 python1.6 python1.5]
   dnl doesn't work.
   AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],
     [am_cv_python_pyexecdir],
-    [am_cv_python_pyexecdir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(1,0,prefix='$PYTHON_EXEC_PREFIX')"
2>/dev/null ||
-     echo "${PYTHON_EXEC_PREFIX}/lib/python${PYTHON_VERSION}/site-packages"`])
+    [if test "x$exec_prefix" = xNONE
+     then
+       am_py_exec_prefix=$am_py_prefix
+     else
+       am_py_exec_prefix=$exec_prefix
+     fi
+     am_cv_python_pyexecdir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(1,0,prefix='$am_py_exec_prefix'))"
2>/dev/null ||
+     echo "$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages"`
+     case $am_cv_python_pyexecdir in
+     $am_py_exec_prefix*)
+       am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
+       am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
+       ;;
+     *)
+       case $am_py_exec_prefix in
+         /usr|/System*) ;;
+         *)
+	   am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
+	   ;;
+       esac
+       ;;
+     esac
+    ])
   AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])
 
   dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)
@@ -235,34 +363,24 @@ python2.1 python2.0 python1.6 python1.5]
 # Run ACTION-IF-FALSE otherwise.
 # This test uses sys.hexversion instead of the string equivalent (first
 # word of sys.version), in order to cope with versions such as 2.2c1.
-# hexversion has been introduced in Python 1.5.2; it's probably not
-# worth to support older versions (1.5.1 was released on October 31, 1998).
+# This supports Python 2.0 or higher. (2.0 was released on October 16, 2000).
 AC_DEFUN([AM_PYTHON_CHECK_VERSION],
- [prog="import sys, string
+ [prog="import sys
 # split strings by '.' and convert to numeric.  Append some zeros
 # because we need at least 4 digits for the hex conversion.
-minver = map(int, string.split('$2', '.')) + [[0, 0, 0]]
+# map returns an iterator in Python 3.0 and a list in 2.x
+minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]]
 minverhex = 0
-for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[[i]]
+# xrange is not present in Python 3.0 and range returns an iterator
+for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]]
 sys.exit(sys.hexversion < minverhex)"
   AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])
 
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.     -*- Autoconf -*-
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # AM_RUN_LOG(COMMAND)
 # -------------------



Mime
View raw message