incubator-couchdb-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From till <klimp...@gmail.com>
Subject Re: CouchDB packaging for Ubuntu
Date Tue, 12 Jun 2012 16:06:24 GMT
3> test_util:config_files().
["/usr/etc/couchdb/default.ini",
 "/home/vagrant/buildbox/testsuite/tests/random_port.ini",
 "/usr/etc/couchdb/local.ini"]

This is the problem – the prefix is not used for sysconfdir. The dir is in /etc not in PREFIX/etc.

Till  

--  
till
Sent with Sparrow (http://www.sparrowmailapp.com/?sig)


On Tuesday, June 12, 2012 at 5:52 PM, CGS wrote:

> Can you do a test for me? Please, open an Erlang shell (erl) in tests/
> directory (hopefully you will still have the test_util.beam file) and
> copy-paste these lines (exit with CTRL+g and q<Enter>):
>  
> l(test_util).
> test_util:init_code_path().
> test_util:config_files().
> l(couch_config).
> couch_config:start_link(test_util:config_files()).
> l(couch_drv).
> couch_drv:start_link().
>  
> Your result should look like this:
>  
> 1> l(test_util).
> {module,test_util}
> 2> test_util:init_code_path().
> ok
> 3> test_util:config_files().
> ["/usr/etc/couchdb/default.ini",
> "<path_to_tests_dir>/random_port.ini",
> "/usr/etc/couchdb/local.ini"]
> 4> l(couch_config).
> {module,couch_config}
> 5> couch_config:start_link(test_util:config_files()).
> {ok,<0.38.0>}
> 6> l(couch_drv).
> {module,couch_drv}
> 7> couch_drv:start_link().
> {ok,<0.41.0>}
>  
> where <path_to_local_dir> should be the same set COUCHDB_TEST_ETAP_PATH and
> the same with the result of pwd (considering you are still in tests
> directory). Let me know the output, please.
>  
> CGS
>  
>  
>  
>  
> On Tue, Jun 12, 2012 at 5:21 PM, till <klimpong@gmail.com (mailto:klimpong@gmail.com)>
wrote:
>  
> >  
> >  
> > On Tuesday, June 12, 2012 at 4:30 PM, CGS wrote:
> >  
> > > COUCHDB_TEST_PATH should be the same as PREFIX and/or EPREFIX from
> > > configure options. The rest gets this variable in front (e.g., if PREFIX
> > > was set to "/" at the configuration stage, then COUCHDB_TEST_PATH should
> > >  
> >  
> > be
> > > set to ""). E.g., few things from my installation, I have:
> > >  
> > > - default.ini and local.ini in /usr/local/etc/coucdb/ and that requires:
> > > COUCHDB_TEST_PATH "/usr/local"
> > > COUCHDB_TEST_ETC_PATH "etc/couchdb"
> > >  
> >  
> >  
> > Ok, so basically I am trying to integrate as much as possible with Ubuntu
> > – so I set my prefix to /usr (see github link).
> >  
> > COUCHDB_TEST_PATH "/usr"
> > >  
> > > - CouchDB .beam files path in
> > > /usr/local/lib/couchdb/erlang/lib/couch-1.2.0/ebin and that requires:
> > > COUCHDB_TEST_PATH "/usr/local"
> > > COUCHDB_TEST_LIB_PATH "lib/couchdb"
> > > COUCHDB_TEST_EXTRA "erlang/lib"
> > > COUCHDB_TEST_VERSION "-1.2.0"
> > > COUCHDB_TEST_EBIN "ebin"
> > >  
> >  
> >  
> > This is the path when I install my package:
> > /usr/lib/couchdb/erlang/lib/couch-1.2.0/
> >  
> >  
> > >  
> > > The problem may be in COUCHDB_TEST_ETAP_PATH "./tests" (preferable full
> > > path and not relative because the tests don't know too much about
> > >  
> >  
> > relative
> > > paths). Can you try to set it as a full path and execute the tests again?
> > > You don't need to clean anything from the previous executions.
> > >  
> >  
> >  
> >  
> > I just did that – tests fail the same way.
> >  
> > I can't really tell what the cause is since the erl_crash.dump is kinda
> > hard to read. Signal vs. noise. :)
> >  
> > Till
> > >  
> > > CGS
> > >  
> > >  
> > >  
> > >  
> > > On Tue, Jun 12, 2012 at 4:06 PM, till <klimpong@gmail.com (mailto:klimpong@gmail.com)
(mailto:
> > klimpong@gmail.com (mailto:klimpong@gmail.com))> wrote:
> > >  
> > > > Yes, pretty much:
> > > > https://github.com/till/couchdb-deb/blob/master/testsuite/test.cfg
> > > >  
> > > > I haven't checked in detail, but – do those lib/etc paths get prefixed
> > > > with COUCHDB_TEST_PATH?
> > > >  
> > > > Till
> > > >  
> > > > --
> > > > till
> > > > Sent with Sparrow (http://www.sparrowmailapp.com/?sig)
> > > >  
> > > >  
> > > > On Tuesday, June 12, 2012 at 3:07 PM, CGS wrote:
> > > >  
> > > > > Have you modified the parameters from test.cfg to point to your
> > CouchDB
> > > > > installation?
> > > > >  
> > > > > CGS
> > > > >  
> > > > >  
> > > > >  
> > > > > On Tue, Jun 12, 2012 at 2:57 PM, till <klimpong@gmail.com (mailto:klimpong@gmail.com)
(mailto:
> > klimpong@gmail.com (mailto:klimpong@gmail.com)) (mailto:
> > > > klimpong@gmail.com (mailto:klimpong@gmail.com))> wrote:
> > > > >  
> > > > > >  
> > > > > >  
> > > > > > On Tuesday, June 12, 2012 at 2:36 PM, CGS wrote:
> > > > > >  
> > > > > > > Well, the default installation requires root permissions
as many
> > > > paths
> > > > > > are
> > > > > > > accessible only as root (you did 'sudo make install', didn't
> > > > > >  
> > > > > >  
> > > > >  
> > > >  
> > > >  
> > >  
> >  
> > you?).
> > > > > >  
> > > > >  
> > > >  
> > > >  
> > > > Also,
> > > > > > > you do sudo apt-get install, so, the tests will be run
under root
> > > > > > > permissions. That's why I said in the README file that
these
> > > > > > >  
> > > > > >  
> > > > >  
> > > >  
> > > >  
> > >  
> >  
> > tests
> > > > > > >  
> > > > > >  
> > > > >  
> > > >  
> > > >  
> > > > should
> > > > > > > be run as root (a.k.a. sudo command).
> > > > > > >  
> > > > > > > CGS
> > > > > > Sorry, over read that before, but the failures are still happening
> > > > > >  
> > > > >  
> > > >  
> > > >  
> > >  
> >  
> > with
> > > > > > sudo:
> > > > > > https://gist.github.com/2917336
> > > > > >  
> > > > >  
> > > >  
> > >  
> >  
> >  
>  
>  
>  



Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message