incubator-cloudstack-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Marcus Sorensen <shadow...@gmail.com>
Subject Re: CloudStack and Networking Question
Date Tue, 22 Jan 2013 22:40:55 GMT
On Tue, Jan 22, 2013 at 1:43 PM, Mike Tutkowski <
mike.tutkowski@solidfire.com> wrote:

> So, it looks like DevCloud just uses NAT with port forwarding.
>
> I'm not sure how I could use DevCloud and leverage iSCSI storage on my
> company's LAN.
>
>
That should work just fine. From within my devcloud I can ping IP addresses
in my greater office network and on out into the internet, it just NATs
through. You can't hit the devcloud from the outside, but you should be
able to create an iscsi connection from devcloud out.

If you stick with your KVM setup, as mentioned you won't be able to run VMs
in your virtualbox. But to get started you can use the normal devcloud
instructions, and worry about KVM compatibility once you get used to it.


> That was the main reason I had switched over to trying to build up a
> CloudStack environment from scratch (in part, also, so I could see first
> hand how it's done).
>
>
> On Tue, Jan 22, 2013 at 1:28 PM, Mike Tutkowski <
> mike.tutkowski@solidfire.com> wrote:
>
> > Just heard back from a friend of mine.  He said he had Windows as his
> host
> > OS, was running Ubuntu in a VM under VirtualBox and had the same issue
> as I
> > had (NAT worked; bridged didn't).
> >
> >
> > On Tue, Jan 22, 2013 at 1:24 PM, Mike Tutkowski <
> > mike.tutkowski@solidfire.com> wrote:
> >
> >> OK, thanks - I haven't gotten around to installing any agent software on
> >> a host.  I'm just at the part where I was installing the MS on my OS in
> a
> >> VM.
> >>
> >>
> >> On Tue, Jan 22, 2013 at 1:22 PM, Clayton Weise <cweise@iswest.net>
> wrote:
> >>
> >>> The agent is what runs on KVM hosts to carry out requests from the
> >>> management server(s).  The management server is the cloud-management
> >>> service which oversees all the stuff CloudStack does.
> >>>
> >>> -----Original Message-----
> >>> From: Mike Tutkowski [mailto:mike.tutkowski@solidfire.com]
> >>> Sent: Tuesday, January 22, 2013 12:17 PM
> >>> To: cloudstack-dev@incubator.apache.org
> >>> Subject: Re: CloudStack and Networking Question
> >>>
> >>> Pranav = Yeah, good idea...I hooked my MacBook up via cable to the
> >>> network
> >>> and disabled the wireless, but it didn't work. :( I did get an IP
> address
> >>> and could access web sites on the Internet, but Tomcat was not running.
> >>>
> >>> Marcus = What is the difference between the Agent and the Management
> >>> Server?  I followed the instructions here:
> >>>
> >>>
> >>>
> http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0.0-incubating/html/Installation_Guide/management-server-install-flow.html
> >>>
> >>> In NAT mode, I usually get 10.0.2.15 as my IP address (no access from
> my
> >>> Mac).
> >>> In bridged mode, as expected, I get an IP address on my company's LAN.
> >>>
> >>> I do have the source code in my Mac OX X environment, so maybe that is
> >>> the
> >>> route I will have to take.
> >>>
> >>> As an oddity on top of this all, if I run Tomcat 6 manually using the
> >>> tomcat6 script in /etc/init.d/, Tomcat works.  I can hit
> >>> http://localhost:8080, but it doesn't know about
> >>> http://localhost:8080/client/
> >>>
> >>>
> >>> On Tue, Jan 22, 2013 at 11:59 AM, Marcus Sorensen <shadowsor@gmail.com
> >>> >wrote:
> >>>
> >>> > Mike, are you just trying to run the management server, not the
> agent,
> >>> in a
> >>> > VM? If you are trying to run the whole thing, it will fail with
> >>> virtualbox
> >>> > because cloudstack verifies that there is hardware support for
> >>> > virtualization before starting the agent. This is not related to your
> >>> issue
> >>> > now, but you may run into it. If you want to run the agent and VMs
> >>> inside
> >>> > this VM, you will need to use VMware fusion and enable the nested
> >>> > virtualization.
> >>> >
> >>> > Aside from that, check your network in the Ubuntu box and see what
> >>> you're
> >>> > getting in each mode. In NAT mode with virtualbox, you'll have no
> >>> access to
> >>> > the VM from your Mac, because your mac has no IP inside the NAT. This
> >>> is
> >>> > why devcloud uses both NAT and host-only.
> >>> >
> >>> > But it sounds like your issue is deeper because you cannot even get
> >>> > cloud-management to start. In the past, if I have seen no errors in
> the
> >>> > log, but no success, I have edited the startup script to print out
> the
> >>> > actual command being run to start the management server (with class
> >>> paths
> >>> > and all), and then run it manually, perhaps adding a debug flag. That
> >>> > usually gives me the error.
> >>> >
> >>> > As an alternative, you can pull the source code, build it, and do the
> >>> > 'jetty:run' per devcloud instructions, and that should print debug
> >>> code to
> >>> > your screen. It could at least tell you why the management server
> won't
> >>> > start, even if you don't want to install from master. That will
> require
> >>> > cleaning out the database though, and then setting up the database
> >>> again
> >>> > when going back to 4.0.
> >>> >
> >>> > mvn -P developer,systemvm clean install
> >>> >
> >>> > mvn -P developer -pl developer,tools/devcloud -Ddeploydb
> >>> >
> >>> > mvn -pl :cloud-client-ui jetty:run
> >>> >
> >>> >
> >>> > On Tue, Jan 22, 2013 at 11:42 AM, Mike Tutkowski <
> >>> > mike.tutkowski@solidfire.com> wrote:
> >>> >
> >>> > > Hi,
> >>> > >
> >>> > > I'm running CloudStack on Ubuntu 12.04.1 in a VirtualBox VM.
> >>> > >
> >>> > > When I run it in NAT mode, it works (I can bring up the web page
to
> >>> log
> >>> > in
> >>> > > and my login works).
> >>> > >
> >>> > > In any other networking mode (bridged, internal, host only), it
> does
> >>> not
> >>> > > work (Tomcat is not running and I cannot get it to run (even though
> >>> > there's
> >>> > > no obvious error message) by running the cloud-management script).
> >>> > >
> >>> > > My host OS is Mac OS X and I am connected to my company's network
> >>> over
> >>> > > Mac's wireless network (AirPort).
> >>> > >
> >>> > > I have tried to use VMware instead of VirtualBox and come across
> the
> >>> same
> >>> > > problem.
> >>> > >
> >>> > > Can anyone think of some reason this might be happening?  Does
> anyone
> >>> > else
> >>> > > develop CloudStack on Mac OS X using virtual machines?
> >>> > >
> >>> > > Thanks!
> >>> > >
> >>> > > --
> >>> > > *Mike Tutkowski*
> >>> > > *Senior CloudStack Developer, SolidFire Inc.*
> >>> > > e: mike.tutkowski@solidfire.com
> >>> > > o: 303.746.7302
> >>> > > Advancing the way the world uses the
> >>> > > cloud<http://solidfire.com/solution/overview/?video=play>
> >>> > > *(tm)*
> >>> > >
> >>> >
> >>>
> >>>
> >>>
> >>> --
> >>> *Mike Tutkowski*
> >>> *Senior CloudStack Developer, SolidFire Inc.*
> >>> e: mike.tutkowski@solidfire.com
> >>> o: 303.746.7302
> >>> Advancing the way the world uses the
> >>> cloud<http://solidfire.com/solution/overview/?video=play>
> >>> *(tm)*
> >>>
> >>
> >>
> >>
> >> --
> >> *Mike Tutkowski*
> >>  *Senior CloudStack Developer, SolidFire Inc.*
> >> e: mike.tutkowski@solidfire.com
> >> o: 303.746.7302
> >> Advancing the way the world uses the cloud<
> http://solidfire.com/solution/overview/?video=play>
> >> *™*
> >>
> >
> >
> >
> > --
> > *Mike Tutkowski*
> > *Senior CloudStack Developer, SolidFire Inc.*
> > e: mike.tutkowski@solidfire.com
> > o: 303.746.7302
> > Advancing the way the world uses the cloud<
> http://solidfire.com/solution/overview/?video=play>
> > *™*
> >
>
>
>
> --
> *Mike Tutkowski*
> *Senior CloudStack Developer, SolidFire Inc.*
> e: mike.tutkowski@solidfire.com
> o: 303.746.7302
> Advancing the way the world uses the
> cloud<http://solidfire.com/solution/overview/?video=play>
> *™*
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message