incubator-cloudstack-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Mike Tutkowski <mike.tutkow...@solidfire.com>
Subject Re: CloudStack and Networking Question
Date Tue, 22 Jan 2013 20:24:40 GMT
OK, thanks - I haven't gotten around to installing any agent software on a
host.  I'm just at the part where I was installing the MS on my OS in a VM.


On Tue, Jan 22, 2013 at 1:22 PM, Clayton Weise <cweise@iswest.net> wrote:

> The agent is what runs on KVM hosts to carry out requests from the
> management server(s).  The management server is the cloud-management
> service which oversees all the stuff CloudStack does.
>
> -----Original Message-----
> From: Mike Tutkowski [mailto:mike.tutkowski@solidfire.com]
> Sent: Tuesday, January 22, 2013 12:17 PM
> To: cloudstack-dev@incubator.apache.org
> Subject: Re: CloudStack and Networking Question
>
> Pranav = Yeah, good idea...I hooked my MacBook up via cable to the network
> and disabled the wireless, but it didn't work. :( I did get an IP address
> and could access web sites on the Internet, but Tomcat was not running.
>
> Marcus = What is the difference between the Agent and the Management
> Server?  I followed the instructions here:
>
>
> http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0.0-incubating/html/Installation_Guide/management-server-install-flow.html
>
> In NAT mode, I usually get 10.0.2.15 as my IP address (no access from my
> Mac).
> In bridged mode, as expected, I get an IP address on my company's LAN.
>
> I do have the source code in my Mac OX X environment, so maybe that is the
> route I will have to take.
>
> As an oddity on top of this all, if I run Tomcat 6 manually using the
> tomcat6 script in /etc/init.d/, Tomcat works.  I can hit
> http://localhost:8080, but it doesn't know about
> http://localhost:8080/client/
>
>
> On Tue, Jan 22, 2013 at 11:59 AM, Marcus Sorensen <shadowsor@gmail.com
> >wrote:
>
> > Mike, are you just trying to run the management server, not the agent,
> in a
> > VM? If you are trying to run the whole thing, it will fail with
> virtualbox
> > because cloudstack verifies that there is hardware support for
> > virtualization before starting the agent. This is not related to your
> issue
> > now, but you may run into it. If you want to run the agent and VMs inside
> > this VM, you will need to use VMware fusion and enable the nested
> > virtualization.
> >
> > Aside from that, check your network in the Ubuntu box and see what you're
> > getting in each mode. In NAT mode with virtualbox, you'll have no access
> to
> > the VM from your Mac, because your mac has no IP inside the NAT. This is
> > why devcloud uses both NAT and host-only.
> >
> > But it sounds like your issue is deeper because you cannot even get
> > cloud-management to start. In the past, if I have seen no errors in the
> > log, but no success, I have edited the startup script to print out the
> > actual command being run to start the management server (with class paths
> > and all), and then run it manually, perhaps adding a debug flag. That
> > usually gives me the error.
> >
> > As an alternative, you can pull the source code, build it, and do the
> > 'jetty:run' per devcloud instructions, and that should print debug code
> to
> > your screen. It could at least tell you why the management server won't
> > start, even if you don't want to install from master. That will require
> > cleaning out the database though, and then setting up the database again
> > when going back to 4.0.
> >
> > mvn -P developer,systemvm clean install
> >
> > mvn -P developer -pl developer,tools/devcloud -Ddeploydb
> >
> > mvn -pl :cloud-client-ui jetty:run
> >
> >
> > On Tue, Jan 22, 2013 at 11:42 AM, Mike Tutkowski <
> > mike.tutkowski@solidfire.com> wrote:
> >
> > > Hi,
> > >
> > > I'm running CloudStack on Ubuntu 12.04.1 in a VirtualBox VM.
> > >
> > > When I run it in NAT mode, it works (I can bring up the web page to log
> > in
> > > and my login works).
> > >
> > > In any other networking mode (bridged, internal, host only), it does
> not
> > > work (Tomcat is not running and I cannot get it to run (even though
> > there's
> > > no obvious error message) by running the cloud-management script).
> > >
> > > My host OS is Mac OS X and I am connected to my company's network over
> > > Mac's wireless network (AirPort).
> > >
> > > I have tried to use VMware instead of VirtualBox and come across the
> same
> > > problem.
> > >
> > > Can anyone think of some reason this might be happening?  Does anyone
> > else
> > > develop CloudStack on Mac OS X using virtual machines?
> > >
> > > Thanks!
> > >
> > > --
> > > *Mike Tutkowski*
> > > *Senior CloudStack Developer, SolidFire Inc.*
> > > e: mike.tutkowski@solidfire.com
> > > o: 303.746.7302
> > > Advancing the way the world uses the
> > > cloud<http://solidfire.com/solution/overview/?video=play>
> > > *(tm)*
> > >
> >
>
>
>
> --
> *Mike Tutkowski*
> *Senior CloudStack Developer, SolidFire Inc.*
> e: mike.tutkowski@solidfire.com
> o: 303.746.7302
> Advancing the way the world uses the
> cloud<http://solidfire.com/solution/overview/?video=play>
> *(tm)*
>



-- 
*Mike Tutkowski*
*Senior CloudStack Developer, SolidFire Inc.*
e: mike.tutkowski@solidfire.com
o: 303.746.7302
Advancing the way the world uses the
cloud<http://solidfire.com/solution/overview/?video=play>
*™*

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message