incubator-cloudstack-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Charles Moulliard <ch0...@gmail.com>
Subject Re: Can we still use DevCloud VM Image ?
Date Fri, 16 Nov 2012 10:05:16 GMT
Here is the config that I use

- eth0 = NAT adapter
- eth1 = Host-In Adapter = Network 192.168.56.x

I have experienced the same issue as you. After reboot I was not able
anymore to access internet. This is why I have put in comment the xenbr0
configuration in /etc/network.interfaces

Regards,

Charles




On Fri, Nov 16, 2012 at 10:18 AM, Sebastien Goasguen <runseb@gmail.com>wrote:

>
> On Nov 16, 2012, at 8:10 AM, Charles Moulliard <ch007m@gmail.com> wrote:
>
> > Hi Rohit,
> >
> > Can you answer to this question please ? Do I have to follow instructions
> > here to configure NFS server (
> >
> http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0.0-incubating/html/Installation_Guide/management-server-install-flow.html#nfs-shares-on-management-server
> )
> > ?
> >
> > Another thing that I would like to share. If we configure the Xenbr0
> > interface like this, then the machine is not able to connect to internet
> >
> > more /etc/network/interfaces
> > # This file describes the network interfaces available on your system
> > # and how to activate them. For more information, see interfaces(5).
> >
> > # The loopback network interface
> > auto lo
> > iface lo inet loopback
> >
> > # The primary network interface
> > auto eth0
> > iface eth0 inet dhcp
> >
> > auto xenbr0
> > iface xenbr0 inet dhcp
> >    bridge_ports eth0
> >
> > auto eth1
> > iface eth1 inet static
> >   address 192.168.56.2
> >   netmask 255.255.255.0
> >   broadcast 192.168.56.255
> >   gateway 192.168.56.1
> >
> > Any idea is welcome ?
>
>
> Charles, I presume that eth0 is attached to a bridge adapter in vbox and
> that eth1 is attached to a host-only adapter in vbox ?
>
> I am having issues getting those two adapters to work simultaneously as
> well. It seems to work the first time you set it up but not after your
> reboot the machine. I tried with deleting
> /etc/udev/rules.d/70-persistent-net.rule to no avail. I believe it's a
> vbox/OSX issue.
>
> -Sebastien
>
> >
> > Regards,
> >
> > Charles
> >
> >
> > On Thu, Nov 15, 2012 at 6:47 PM, Charles Moulliard <ch007m@gmail.com>
> wrote:
> >
> >> My question was more about --> Do I have to follow instructions here to
> >> configure NFS server (
> >>
> http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0.0-incubating/html/Installation_Guide/management-server-install-flow.html#nfs-shares-on-management-server
> )
> >> ?
> >>
> >>
> >> On Thu, Nov 15, 2012 at 6:35 PM, Rohit Yadav <rohit.yadav@citrix.com
> >wrote:
> >>
> >>> Yes, hack and go through the .bash_history, setup systemvm template.
> Then
> >>> you're pretty much done as long as yout network won't fail you.
> >>> Rest, you have already built and run mgmt server. Won't be much help.
> >>>
> >>> Regards.
> >>>
> >>> ________________________________________
> >>> From: Charles Moulliard [ch007m@gmail.com]
> >>> Sent: Thursday, November 15, 2012 11:00 PM
> >>> To: cloudstack-dev
> >>> Subject: Re: Can we still use DevCloud VM Image ?
> >>>
> >>> Hi Rohit,
> >>>
> >>> I progress. I have been able to install xen, configure network to
> create a
> >>> private network and also access to internet and nfs server is
> >>> installed (apt-get
> >>> install nfs-kernel-server). Do we have something more to do for NFS ?
> >>>
> >>> Regards,
> >>>
> >>> Charles
> >>>
> >>>
> >>> On Thu, Nov 15, 2012 at 3:29 PM, Rohit Yadav <rohit.yadav@citrix.com>
> >>> wrote:
> >>>
> >>>>
> >>>> On 15-Nov-2012, at 7:12 PM, Charles Moulliard <ch007m@gmail.com>
> wrote:
> >>>>
> >>>>> As of ubuntu-11 is configured use xen,
> >>>>>
> >>>>> "As of Ubuntu 11.10 (Oneiric), the default kernel included in Ubuntu
> >>> can
> >>>> be
> >>>>> used directly with the Xen hypervisor as the management (or control)
> >>>> domain
> >>>>> (Dom0 or Domain0 in Xen terminology). "
> >>>>>
> >>>>> why don't you create an image using it ?
> >>>>
> >>>> Yes, I'm using this only. apt-get install xen-hypervisor and you're
> >>> done.
> >>>> To use xen, one just need to select the kernel with xen during booting
> >>> on
> >>>> grub.
> >>>> If you're keep, hack ~/.bash_history from the DevCloud image, the
> >>> history
> >>>> will tell you what was performed to create devcloud.
> >>>>
> >>>> About pre-seeding systemvm template, see this:
> >>>>
> >>>>
> >>>
> http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0.0-incubating/html/Installation_Guide/management-server-install-flow.html#prepare-system-vm-template
> >>>>
> >>>> You need to pre-seed, i.e. put a systemvm template on nfs with which
> >>> your
> >>>> systemvm, cpvm and domr are created.
> >>>>
> >>>> Regards.
> >>>>
> >>>>>
> >>>>>
> >>>>> On Thu, Nov 15, 2012 at 12:08 PM, Rohit Yadav <
> rohit.yadav@citrix.com
> >>>>> wrote:
> >>>>>
> >>>>>>
> >>>>>> On 15-Nov-2012, at 2:10 PM, Charles Moulliard <ch007m@gmail.com>
> >>> wrote:
> >>>>>>
> >>>>>>> Using VirtualBox R4.2.4 on MacOS 10.7.5  and the image (
> >>>>>>> http://bhaisaab.org/vms/ubuntu-12.04-x86-minimal-vm.tar.gz)
that
> >>> you
> >>>>>>> provide, the OS does not boot (screen stays black).
> >>>>>>
> >>>>>> Oh :(
> >>>>>> Will start with a new image today again. Will keep you posted.
> >>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> On Thu, Nov 15, 2012 at 9:13 AM, Charles Moulliard <
> >>> ch007m@gmail.com>
> >>>>>> wrote:
> >>>>>>>
> >>>>>>>> Many thanks. What do you mean by "*Preseed a systemvm
template and
> >>> you
> >>>>>>>> should be good to go. (2. is the tricky one)" ?*
> >>>>>>
> >>>>>> Yes, this one:
> >>>>>> 2. Configure network such that it's accessible to the host os
and
> can
> >>>>>> access Internet,
> >>>>>>
> >>>>>>>> *I have started to create a google document to define
step-by-step
> >>>> what
> >>>>>>>> do do.*
> >>>>>>
> >>>>>> Cool.
> >>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On Wed, Nov 14, 2012 at 11:19 AM, Rohit Yadav <
> >>> rohit.yadav@citrix.com
> >>>>>>> wrote:
> >>>>>>>>
> >>>>>>>>>
> >>>>>>>>> On 14-Nov-2012, at 3:23 PM, Charles Moulliard <ch007m@gmail.com>
> >>>>>> wrote:
> >>>>>>>>>
> >>>>>>>>>> Hi Rohit,
> >>>>>>>>>>
> >>>>>>>>>> Have you been able to finalize your work about
creating a new
> >>> Ubuntu
> >>>>>>>>> image
> >>>>>>>>>> for VirtualBox. If this is not the case, can
you share with us
> >>>>>>>>> (document,
> >>>>>>>>>> ...) what you have done to configure Ubunttu
(Installating
> MySQL,
> >>>>>>>>> Tomcat,
> >>>>>>>>>> ....) ?
> >>>>>>>>>
> >>>>>>>>> Hi Charles,
> >>>>>>>>>
> >>>>>>>>> Alright I'm back online, will work on releasing
a devcloud image
> >>>> that I
> >>>>>>>>> hope would work out of the box, after some code
monkey duties
> this
> >>>>>> week. In
> >>>>>>>>> the new image, mysql, tomcat, git etc. won't be
installed on
> >>>> devcloud.
> >>>>>> The
> >>>>>>>>> idea is that you develop on your host os, debug
with your fav.
> IDE
> >>>> and
> >>>>>> run
> >>>>>>>>> mgmt server, mysql, jetty/tomcat as well (if you
want to do that
> >>> on
> >>>>>>>>> devcloud that too you can do). The default image
will have only
> >>> the
> >>>>>>>>> preconfigured network, xen (kvm won't run as pv
hypervisor, I
> >>> knew it
> >>>>>>>>> required hvm/intel-vt or amd-v, and I still tried
just to see
> what
> >>>>>> happens
> >>>>>>>>> and it did not run) and nfs server.
> >>>>>>>>>
> >>>>>>>>> I've already shared the base os, which is x86 ubuntu
precise
> >>>>>>>>> http://bhaisaab.org/vms/ubuntu-12.04-x86-minimal-vm.tar.gz(note:
> >>>> this
> >>>>>>>>> is not devcloud, just the base system which is stripped
down and
> >>>>>> archived,
> >>>>>>>>> ~250MB) Till I do that, you may try to diy devcloud,
the top
> level
> >>>>>> goals
> >>>>>>>>> are to: 1. Install xen, 2. Configure network such
that it's
> >>>> accessible
> >>>>>> to
> >>>>>>>>> the host os and can access Internet, 3. Install
and configure
> >>> NFS, 4.
> >>>>>>>>> Preseed a systemvm template and you should be good
to go. (2. is
> >>> the
> >>>>>> tricky
> >>>>>>>>> one)
> >>>>>>>>>
> >>>>>>>>> Just skip the following, something frivolous but
for fun:
> >>>>>>>>> Around devcloud, I'm experimenting a lot (slow internet,
plus
> >>> every
> >>>>>> time
> >>>>>>>>> I mess I start from a fresh copy) so not able to
produce a final
> >>>>>> image; you
> >>>>>>>>> may call me crazy for what I'm going to share next:
so I've a
> >>>>>> raspberrypi
> >>>>>>>>> with me (a dirt cheap small single board arm 32bit
computer, 4 GB
> >>>>>> sdcard,
> >>>>>>>>> 512MB ram etc., http://www.raspberrypi.org and we
know devcloud
> >>> was
> >>>>>>>>> cloud in a box, I'm trying to see if I can create
a devpi or
> >>>> basically
> >>>>>>>>> devcloud but in hardware and not as a vm, basically
cloud in your
> >>>>>> pocket. I
> >>>>>>>>> installed debian wheezy on it and xen pv for arm
(xen
> cloudplaform
> >>>> for
> >>>>>> arm,
> >>>>>>>>> this just blows up, even after cpvm disabled, ssvm
etc. would
> just
> >>>>>> blow it
> >>>>>>>>> up), and this thing fails at the point when I restart
it, also
> the
> >>>>>> default
> >>>>>>>>> sd card (it's storage, think hdd) is small (4GB)
and the disk io
> >>> is
> >>>>>> very
> >>>>>>>>> small re-flashing it every time consumes a lot of
my time,
> >>> ordered a
> >>>>>> 16GB
> >>>>>>>>> class10 sd card for better disk io, will keep you
posted how this
> >>>>>>>>> experiment went, I've a gut feeling though this
won't work given
> >>> the
> >>>>>>>>> resource constraints.
> >>>>>>>>>
> >>>>>>>>> Regards.
> >>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> Regards,
> >>>>>>>>>>
> >>>>>>>>>> Charles
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> On Sun, Nov 11, 2012 at 5:50 PM, Rohit Yadav
<
> >>>> rohit.yadav@citrix.com>
> >>>>>>>>> wrote:
> >>>>>>>>>>
> >>>>>>>>>>> Not really, in my setup I want eth0 to be
host-only which is
> >>>> causing
> >>>>>>>>> some
> >>>>>>>>>>> issues; another problem is I'm making it
x86 only, so I see few
> >>>>>>>>> crashes.
> >>>>>>>>>>> Will update when I'm done.
> >>>>>>>>>>> ________________________________________
> >>>>>>>>>>> From: Charles Moulliard [ch007m@gmail.com]
> >>>>>>>>>>> Sent: Sunday, November 11, 2012 9:06 PM
> >>>>>>>>>>> To: cloudstack-dev
> >>>>>>>>>>> Subject: Re: Can we still use DevCloud VM
Image ?
> >>>>>>>>>>>
> >>>>>>>>>>> Did you succeed it to fix the routing issues
?
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> On Sat, Nov 10, 2012 at 1:53 PM, Rohit Yadav
<
> >>>> rohit.yadav@citrix.com
> >>>>>>>
> >>>>>>>>>>> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>>> Hi Charles, it won't work as the vms
inside host only network
> >>> can
> >>>>>> only
> >>>>>>>>>>>> access the host os and other vms on
it. Therefore devcloud
> >>> inside
> >>>>>>>>>>> host-only
> >>>>>>>>>>>> network won't be able to reach the Internet.
> >>>>>>>>>>>> I'm actually trying to create a new
devcloud image with two
> >>>> network
> >>>>>>>>>>>> adapters, one NAT (eth1, so devcloud
is able to reach the
> >>>> Internet)
> >>>>>>>>> and
> >>>>>>>>>>> one
> >>>>>>>>>>>> host-only adapter (eth0, so we can run
mgmt server etc.) and
> it
> >>>> will
> >>>>>>>>> be
> >>>>>>>>>>>> only 300-350MB (archived). I was trying
not the share the
> >>> image,
> >>>>>>>>> having
> >>>>>>>>>>>> some routing issues when I do that,
will share as soon I fix
> >>> those
> >>>>>>>>>>> issues.
> >>>>>>>>>>>>
> >>>>>>>>>>>> --
> >>>>>>>>>>>> Rohit
> >>>>>>>>>>>> PS. the base system is ubuntu x86 precise
and the untouched
> >>>> stripped
> >>>>>>>>> down
> >>>>>>>>>>>> vm is available here: http://bhaisaab.org/vms
> >>>>>>>>>>>> ________________________________________
> >>>>>>>>>>>> From: Charles Moulliard [ch007m@gmail.com]
> >>>>>>>>>>>> Sent: Saturday, November 10, 2012 4:46
PM
> >>>>>>>>>>>> To: cloudstack-dev
> >>>>>>>>>>>> Subject: Re: Can we still use DevCloud
VM Image ?
> >>>>>>>>>>>>
> >>>>>>>>>>>> Hi,
> >>>>>>>>>>>>
> >>>>>>>>>>>> I have been able to setup the bridged
adapter on virtualbox to
> >>>> allow
> >>>>>>>>> the
> >>>>>>>>>>>> guest machine to get an IP address (from
my DHCP server
> >>> runinng in
> >>>>>>>>> this
> >>>>>>>>>>> lan
> >>>>>>>>>>>> : 192.168.1x).
> >>>>>>>>>>>>
> >>>>>>>>>>>> The guest is configured like this :
> >>>>>>>>>>>>
> >>>>>>>>>>>> root@devcloud:/home/devcloud/download#
more
> >>>> /etc/network/interfaces
> >>>>>>>>>>>> # The loopback network interface
> >>>>>>>>>>>> auto lo
> >>>>>>>>>>>> iface lo inet loopback
> >>>>>>>>>>>>
> >>>>>>>>>>>> # The primary network interface
> >>>>>>>>>>>> auto xenbr0
> >>>>>>>>>>>> iface xenbr0 inet static
> >>>>>>>>>>>> gateway 192.168.56.1
> >>>>>>>>>>>> address 192.168.56.2
> >>>>>>>>>>>> netmask 255.255.255.0
> >>>>>>>>>>>> bridge_ports eth0
> >>>>>>>>>>>>
> >>>>>>>>>>>> auto eth0
> >>>>>>>>>>>> iface eth0 inet static
> >>>>>>>>>>>>
> >>>>>>>>>>>> auto eth1
> >>>>>>>>>>>> iface eth1 inet dhcp
> >>>>>>>>>>>> ***********************************
> >>>>>>>>>>>> eth1      Link encap:Ethernet  HWaddr
08:00:27:df:00:00
> >>>>>>>>>>>>       inet addr:192.168.1.6  Bcast:192.168.1.255
> >>>>>>>>> Mask:255.255.255.0
> >>>>>>>>>>>>       inet6 addr: fe80::a00:27ff:fedf:0/64
Scope:Link
> >>>>>>>>>>>>       UP BROADCAST RUNNING MULTICAST
 MTU:1500  Metric:1
> >>>>>>>>>>>> xenbr0    Link encap:Ethernet  HWaddr
08:00:27:7e:74:9c
> >>>>>>>>>>>>       inet addr:192.168.56.2  Bcast:192.168.56.255
> >>>>>>>>>>> Mask:255.255.255.0
> >>>>>>>>>>>>       inet6 addr: fe80::a00:27ff:fe7e:749c/64
Scope:Link
> >>>>>>>>>>>>       UP BROADCAST RUNNING MULTICAST
 MTU:1500  Metric:1
> >>>>>>>>>>>> *************************************
> >>>>>>>>>>>> ip route
> >>>>>>>>>>>> default via 192.168.56.1 dev xenbr0
 metric 100
> >>>>>>>>>>>> 192.168.1.0/24 dev eth1  proto kernel
 scope link  src
> >>>> 192.168.1.6
> >>>>>>>>>>>> 192.168.56.0/24 dev xenbr0  proto kernel
 scope link  src
> >>>>>>>>> 192.168.56.2
> >>>>>>>>>>>> **************************************
> >>>>>>>>>>>>
> >>>>>>>>>>>> Unfortunately, DNS resolution still
does not work. Is there
> >>>>>> something
> >>>>>>>>>>> else
> >>>>>>>>>>>> to do ?
> >>>>>>>>>>>>
> >>>>>>>>>>>> root@devcloud:/home/devcloud/download#
wget
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>
> >>>>>>
> >>>>
> >>>
> http://be.mirror.eurid.eu/centos/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso
> >>>>>>>>>>>> --2012-11-10 03:11:46--
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>
> >>>>>>
> >>>>
> >>>
> http://be.mirror.eurid.eu/centos/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso
> >>>>>>>>>>>> Resolving be.mirror.eurid.eu (be.mirror.eurid.eu)...
failed:
> >>>>>>>>> Temporary
> >>>>>>>>>>>> failure in name resolution.
> >>>>>>>>>>>> wget: unable to resolve host address
`be.mirror.eurid.eu'
> >>>>>>>>>>>>
> >>>>>>>>>>>> Regards,
> >>>>>>>>>>>>
> >>>>>>>>>>>> Charles
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> On Mon, Nov 5, 2012 at 7:33 PM, Edison
Su <
> >>> Edison.su@citrix.com>
> >>>>>>>>> wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>> The latest devcloud vm using host-only-network(if
you follow
> >>> the
> >>>>>>>>> steps
> >>>>>>>>>>> in
> >>>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>
> >>>>>>
> >>>>
> >>>
> https://cwiki.apache.org/CLOUDSTACK/cloudstack-devcloud-environment-setup.html
> >>>>>>>>>>>> ),
> >>>>>>>>>>>>> which means, devcloud vm can't not
access public network,
> >>> thus,
> >>>>>>>>>>> download
> >>>>>>>>>>>>> template/iso doesn't work.
> >>>>>>>>>>>>> To fix the issue:
> >>>>>>>>>>>>> 1. You can use "Bridged networking",
plug devcloud vm into
> the
> >>>>>>>>> network
> >>>>>>>>>>>>> used by your laptop. Need to change
devcloud vm's ip to the
> ip
> >>>>>>>>> address
> >>>>>>>>>>> in
> >>>>>>>>>>>>> your subnet. And also need to change
> >>> tools/devcloud/devcloud.cfg
> >>>>>>>>>>>>> 2. Add a new network adaptor to
devcloud vm, which is plugged
> >>>> into
> >>>>>>>>>>>>> "Bridged networking". So devcloud
vm will have two nics, one
> >>> is
> >>>> on
> >>>>>>>>>>>>> "host-only network", another one
is on "bridge networking",
> >>> which
> >>>>>> can
> >>>>>>>>>>>>> access public network. Then add
default route on the bridge
> >>>> network
> >>>>>>>>>>> nic.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> -----Original Message-----
> >>>>>>>>>>>>> From: Charles Moulliard [mailto:ch007m@gmail.com]
> >>>>>>>>>>>>> Sent: Sunday, November 04, 2012
11:34 PM
> >>>>>>>>>>>>> To: cloudstack-dev
> >>>>>>>>>>>>> Subject: Can we still use DevCloud
VM Image ?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Last tests with DevCloud VM (
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>
> >>>>>>
> >>>>
> >>>
> https://cwiki.apache.org/CLOUDSTACK/cloudstack-devcloud-environment-setup.html
> >>>>>>>>>>>>> )
> >>>>>>>>>>>>> does not succeed on my Linux machine.
Management server works
> >>>> fine
> >>>>>>>>> like
> >>>>>>>>>>>>> also creation of tiny instances
but there are issues with NFS
> >>>>>> mount,
> >>>>>>>>>>> DNS
> >>>>>>>>>>>>> and of course to download  new ISO
file (CentOs, ...). That
> >>> was
> >>>> not
> >>>>>>>>> the
> >>>>>>>>>>>>> case a few days ago
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> NFS & Primary/Secondary storage
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> WARN  [network.element.VpcVirtualRouterElement]
> >>> (secstorage-1:)
> >>>>>>>>> Network
> >>>>>>>>>>>>> Ntwk[204|Guest|6] is not associated
with any VPC WARN
> >>>>>>>>>>>>> [network.element.VpcVirtualRouterElement]
(consoleproxy-1:)
> >>>> Network
> >>>>>>>>>>>>> Ntwk[204|Guest|6] is not associated
with any VPC WARN
> >>>>>>>>>>>>> [network.element.VpcVirtualRouterElement]
(secstorage-1:)
> >>> Network
> >>>>>>>>>>>>> Ntwk[202|Control|3] is not associated
with any VPC WARN
> >>>>>>>>>>>>> [network.element.VpcVirtualRouterElement]
(consoleproxy-1:)
> >>>> Network
> >>>>>>>>>>>>> Ntwk[202|Control|3] is not associated
with any VPC WARN
> >>>>>>>>>>>>> [network.element.VpcVirtualRouterElement]
(secstorage-1:)
> >>> Network
> >>>>>>>>>>>>> Ntwk[201|Management|2] is not associated
with any VPC WARN
> >>>>>>>>>>>>> [network.element.VpcVirtualRouterElement]
(consoleproxy-1:)
> >>>> Network
> >>>>>>>>>>>>> Ntwk[201|Management|2] is not associated
with any VPC WARN
> >>>>>>>>>>>>> [network.element.VpcVirtualRouterElement]
(secstorage-1:)
> >>> Network
> >>>>>>>>>>>>> Ntwk[203|Storage|4] is not associated
with any VPC WARN
> >>>>>>>>>>> [utils.nio.Link]
> >>>>>>>>>>>>> (AgentManager-Selector:) SSL: Fail
to find the generated
> >>>> keystore.
> >>>>>>>>>>>> Loading
> >>>>>>>>>>>>> fail-safe one to continue.
> >>>>>>>>>>>>> WARN  [storage.download.DownloadListener]
(Timer-4:) Entering
> >>>>>>>>> download
> >>>>>>>>>>>>> error state: timeout waiting for
response from storage host,
> >>>>>>>>>>>>> template=centos.iso at host nfs://192.168.56.2:
> >>>>>>>>> /opt/storage/secondary
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> DNS
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> root@devcloud:/home/devcloud/download#
wget
> >>>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>
> >>>>>>
> >>>>
> >>>
> http://ftp.belnet.be/packages/centos/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso
> >>>>>>>>>>>>> --2012-11-04 23:17:41--
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>
> >>>>>>
> >>>>
> >>>
> http://ftp.belnet.be/packages/centos/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso
> >>>>>>>>>>>>> Resolving ftp.belnet.be (ftp.belnet.be)...
failed: Temporary
> >>>>>> failure
> >>>>>>>>>>> in
> >>>>>>>>>>>>> name resolution.
> >>>>>>>>>>>>> wget: unable to resolve host address
`ftp.belnet.be'
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Question : Is Devcloud VM image
(
> >>>>>>>>>>>>> http://download.cloud.com/templates/devcloud/DevCloud.ova)
> >>> still
> >>>>>> up
> >>>>>>>>> to
> >>>>>>>>>>>>> date to work with Cloudstack 4.10-SNAPSHOT
?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Regards,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> --
> >>>>>>>>>>>>> Charles Moulliard
> >>>>>>>>>>>>> Apache Committer / Sr. Enterprise
Architect (RedHat) Twitter
> :
> >>>>>>>>>>>> @cmoulliard
> >>>>>>>>>>>>> | Blog : http://cmoulliard.blogspot.com
> >>>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> --
> >>>>>>>>>>>> Charles Moulliard
> >>>>>>>>>>>> Apache Committer / Sr. Enterprise Architect
(RedHat)
> >>>>>>>>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> --
> >>>>>>>>>>> Charles Moulliard
> >>>>>>>>>>> Apache Committer / Sr. Enterprise Architect
(RedHat)
> >>>>>>>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> --
> >>>>>>>>>> Charles Moulliard
> >>>>>>>>>> Apache Committer / Sr. Enterprise Architect
(RedHat)
> >>>>>>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> --
> >>>>>>>> Charles Moulliard
> >>>>>>>> Apache Committer / Sr. Enterprise Architect (RedHat)
> >>>>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> --
> >>>>>>> Charles Moulliard
> >>>>>>> Apache Committer / Sr. Enterprise Architect (RedHat)
> >>>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Charles Moulliard
> >>>>> Apache Committer / Sr. Enterprise Architect (RedHat)
> >>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>>
> >>>>
> >>>
> >>>
> >>> --
> >>> Charles Moulliard
> >>> Apache Committer / Sr. Enterprise Architect (RedHat)
> >>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>>
> >>
> >>
> >>
> >> --
> >> Charles Moulliard
> >> Apache Committer / Sr. Enterprise Architect (RedHat)
> >> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
> >>
> >>
> >>
> >
> >
> > --
> > Charles Moulliard
> > Apache Committer / Sr. Enterprise Architect (RedHat)
> > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
>
>


-- 
Charles Moulliard
Apache Committer / Sr. Enterprise Architect (RedHat)
Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message