incubator-cloudstack-commits mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From seb...@apache.org
Subject [32/52] [partial] Revert "CLOUDSTACK-1516: Added .po files for translations"
Date Wed, 20 Mar 2013 09:55:45 GMT
http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/about-hosts.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/about-hosts.po b/docs/ko_KR/about-hosts.po
deleted file mode 100644
index 641e105..0000000
--- a/docs/ko_KR/about-hosts.po
+++ /dev/null
@@ -1,110 +0,0 @@
-# 
-# Translators:
-#  <shibaboy@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-02-02 18:32+0000\n"
-"Last-Translator: sebgoa <runseb@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "About Hosts"
-msgstr "Host에 대하여"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A host is a single computer. Hosts provide the computing resources that run "
-"the guest virtual machines. Each host has hypervisor software installed on "
-"it to manage the guest VMs. For example, a Linux KVM-enabled server, a "
-"Citrix XenServer server, and an ESXi server are hosts."
-msgstr "Host는 한개의 컴퓨터로 볼 수 있으며 Host는 가상 머신이 실행될 수 있도록 컴퓨팅 resource를 제공한다. 각각의 host는 guest VM을 관리하기 위하여 hypervisor 소프트웨어가 설치되어 있다. 예를 들면 Linux KVM, Citrix XenServer, ESXi server 와 같은 host들이 존재한다. "
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The host is the smallest organizational unit within a &PRODUCT; deployment. "
-"Hosts are contained within clusters, clusters are contained within pods, and"
-" pods are contained within zones."
-msgstr "Host는 &PRODUCT; 설치에 있어서 가장 작은 단위 조직이다. Hosts들은 cluster에 속하게 되며, cluster들은 pod에, pod들은 zone에 속하게 된다. "
-
-#. Tag: para
-#, no-c-format
-msgid "Hosts in a &PRODUCT; deployment:"
-msgstr "&PRODUCT; 설치에서의 host"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Provide the CPU, memory, storage, and networking resources needed to host "
-"the virtual machines"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Interconnect using a high bandwidth TCP/IP network and connect to the "
-"Internet"
-msgstr "높은 bandwidth의 TCP/IP를 이용하여 상호 통신하며 internet에 연결되어 있다."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"May reside in multiple data centers across different geographic locations"
-msgstr "상이한 지리학적 위치에 걸쳐 있는 다수의 데이터 센터에 존재할 수 있다."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"May have different capacities (different CPU speeds, different amounts of "
-"RAM, etc.), although the hosts within a cluster must all be homogeneous"
-msgstr "상이한 리소스를 가질 수 있다. (상이한 CPU 클럭, RAM size 등등) 하지만 cluster내에서의 host들은 모두 동일해야 한다. "
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Additional hosts can be added at any time to provide more capacity for guest"
-" VMs."
-msgstr "가상 머신에 추가적인 리소스 할당을 위하여 host의 추가는 언제든지 실행 될 수 있다. "
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; automatically detects the amount of CPU and memory resources "
-"provided by the Hosts."
-msgstr "&PRODUCT; 는 자동적으로 host들에 의하여 제공되는 CPU와 memory의 양을 감지한다."
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Hosts are not visible to the end user. An end user cannot determine which "
-"host their guest has been assigned to."
-msgstr "Host들은 end user에게 보이지 않는다. end user는 특정 host에 자신의 가상 머신이 할당 되는 것을 결정할 수 없다."
-
-#. Tag: para
-#, no-c-format
-msgid "For a host to function in &PRODUCT;, you must do the following:"
-msgstr "&PRODUCT; 에서 host의 올바른 동작을 위해서, 다음과 같이 해야한다:"
-
-#. Tag: para
-#, no-c-format
-msgid "Install hypervisor software on the host"
-msgstr "hypervisor를 host에 설치"
-
-#. Tag: para
-#, no-c-format
-msgid "Assign an IP address to the host"
-msgstr "IP를 host에 할당"
-
-#. Tag: para
-#, no-c-format
-msgid "Ensure the host is connected to the &PRODUCT; Management Server"
-msgstr "해당 host가 &PRODUCT; management server에 연결됨을 확인"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/about-pods.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/about-pods.po b/docs/ko_KR/about-pods.po
deleted file mode 100644
index 15240d8..0000000
--- a/docs/ko_KR/about-pods.po
+++ /dev/null
@@ -1,30 +0,0 @@
-# 
-# Translators:
-#  <shibaboy@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-03-19 14:02+0000\n"
-"Last-Translator: sebgoa <runseb@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "About Pods"
-msgstr "Pods에 대하여"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A pod often represents a single rack. Hosts in the same pod are in the same "
-"subnet. A pod is the second-largest organizational unit within a &PRODUCT; "
-"deployment. Pods are contained within zones. Each zone can contain one or "
-"more pods. A pod consists of one or more clusters of hosts and one or more "
-"primary storage servers. Pods are not visible to the end user."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/about-primary-storage.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/about-primary-storage.po b/docs/ko_KR/about-primary-storage.po
deleted file mode 100644
index 5ed01f0..0000000
--- a/docs/ko_KR/about-primary-storage.po
+++ /dev/null
@@ -1,59 +0,0 @@
-# 
-# Translators:
-#  <shibaboy@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-01-29 00:38+0000\n"
-"Last-Translator: shibaboy <shibaboy@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "About Primary Storage"
-msgstr "Primary Storage의 소개"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Primary storage is associated with a cluster, and it stores the disk volumes"
-" for all the VMs running on hosts in that cluster. You can add multiple "
-"primary storage servers to a cluster. At least one is required. It is "
-"typically located close to the hosts for increased performance."
-msgstr "Primary Storage는 cluster와 연계되어 있으며, 해당 cluster의 host에 상주하는 모든 VM들의 disk volume을 저장하는 곳이다. 한 cluster에 복수개의 primary storage를 추가할 수 있고 최소한 1개가 필수이다. 일반적으로 성능을 높이기 위하여 host들과 가까운 곳에 위치시킨다. "
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; is designed to work with all standards-compliant iSCSI and NFS "
-"servers that are supported by the underlying hypervisor, including, for "
-"example:"
-msgstr "&PRODUCT; 는 hypervisor를 지원하는 모든 표준 iSCSI, NFS 서버와 동작할 수 있다. 예를 들면:"
-
-#. Tag: para
-#, no-c-format
-msgid "Dell EqualLogic™ for iSCSI"
-msgstr "Dell EqualLogic™ for iSCSI"
-
-#. Tag: para
-#, no-c-format
-msgid "Network Appliances filers for NFS and iSCSI"
-msgstr "Network Appliances filers for NFS and iSCSI"
-
-#. Tag: para
-#, no-c-format
-msgid "Scale Computing for NFS"
-msgstr "Scale Computing for NFS"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you intend to use only local disk for your installation, you can skip to "
-"Add Secondary Storage."
-msgstr "설치 시에 local disk만을 사용할 예정이라면, Secondary Storage의 추가는 할 필요가 없다."

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/accounts-users-domains.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/accounts-users-domains.po b/docs/ko_KR/accounts-users-domains.po
deleted file mode 100644
index 1751d10..0000000
--- a/docs/ko_KR/accounts-users-domains.po
+++ /dev/null
@@ -1,121 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2012-09-24 02:44+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Accounts, Users, and Domains"
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Accounts"
-msgstr "계정 정보"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"An account typically represents a customer of the service provider or a "
-"department in a large organization. Multiple users can exist in an account."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Domains"
-msgstr "도메인"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Accounts are grouped by domains. Domains usually contain multiple accounts "
-"that have some logical relationship to each other and a set of delegated "
-"administrators with some authority over the domain and its subdomains. For "
-"example, a service provider with several resellers could create a domain for"
-" each reseller."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For each account created, the Cloud installation creates three different "
-"types of user accounts: root administrator, domain administrator, and user."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Users"
-msgstr "사용자"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Users are like aliases in the account. Users in the same account are not "
-"isolated from each other, but they are isolated from users in other "
-"accounts. Most installations need not surface the notion of users; they just"
-" have one user per account. The same user cannot belong to multiple "
-"accounts."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Username is unique in a domain across accounts in that domain. The same "
-"username can exist in other domains, including sub-domains. Domain name can "
-"repeat only if the full pathname from root is unique. For example, you can "
-"create root/d1, as well as root/foo/d1, and root/sales/d1."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Administrators are accounts with special privileges in the system. There may"
-" be multiple administrators in the system. Administrators can create or "
-"delete other administrators, and change the password for any user in the "
-"system."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Domain Administrators"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Domain administrators can perform administrative operations for users who "
-"belong to that domain. Domain administrators do not have visibility into "
-"physical servers or other domains."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Root Administrator"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Root administrators have complete access to the system, including managing "
-"templates, service offerings, customer care administrators, and domains"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The resources belong to the account, not individual users in that account. "
-"For example, billing, resource limits, and so on are maintained by the "
-"account, not the users. A user can operate on any resource in the account "
-"provided the user has privileges for that operation. The privileges are "
-"determined by the role."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/accounts.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/accounts.po b/docs/ko_KR/accounts.po
deleted file mode 100644
index bca0f78..0000000
--- a/docs/ko_KR/accounts.po
+++ /dev/null
@@ -1,19 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2012-09-24 02:44+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Accounts"
-msgstr "계정 정보"

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/acquire-new-ip-for-vpc.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/acquire-new-ip-for-vpc.po b/docs/ko_KR/acquire-new-ip-for-vpc.po
deleted file mode 100644
index 8f5a9fb..0000000
--- a/docs/ko_KR/acquire-new-ip-for-vpc.po
+++ /dev/null
@@ -1,117 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-02-02 18:32+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Acquiring a New IP Address for a VPC"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When you acquire an IP address, all IP addresses are allocated to VPC, not "
-"to the guest networks within the VPC. The IPs are associated to the guest "
-"network only when the first port-forwarding, load balancing, or Static NAT "
-"rule is created for the IP or the network. IP can't be associated to more "
-"than one network at a time."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Configure button of the VPC to which you want to deploy the VMs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The VPC page is displayed where all the tiers you created are listed in a "
-"diagram."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACLs"
-msgstr "네트워크 권한 관리(ACL)"
-
-#. Tag: para
-#, no-c-format
-msgid "Select IP Addresses."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The IP Addresses page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Acquire New IP, and click Yes in the confirmation dialog."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You are prompted for confirmation because, typically, IP addresses are a "
-"limited resource. Within a few moments, the new IP address should appear "
-"with the state Allocated. You can now use the IP address in port forwarding,"
-" load balancing, and static NAT rules."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/add-gateway-vpc.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/add-gateway-vpc.po b/docs/ko_KR/add-gateway-vpc.po
deleted file mode 100644
index 3b5e6bb..0000000
--- a/docs/ko_KR/add-gateway-vpc.po
+++ /dev/null
@@ -1,154 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2012-12-03 06:26+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Adding a Private Gateway to a VPC"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A private gateway can be added by the root admin only. The VPC private "
-"network has 1:1 relationship with the NIC of the physical network. No "
-"gateways with duplicated VLAN and IP are allowed in the same data center."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Configure button of the VPC to which you want to configure load "
-"balancing rules."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The VPC page is displayed where all the tiers you created are listed in a "
-"diagram."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Private Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACLs"
-msgstr "네트워크 권한 관리(ACL)"
-
-#. Tag: para
-#, no-c-format
-msgid "Select Private Gateways."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The Gateways page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Add new gateway:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Specify the following:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Physical Network</emphasis>: The physical network "
-"you have created in the zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">IP Address</emphasis>: The IP address associated "
-"with the VPC gateway."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Gateway</emphasis>: The gateway through which the "
-"traffic is routed to and from the VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Netmask</emphasis>: The netmask associated with the "
-"VPC gateway."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">VLAN</emphasis>: The VLAN associated with the VPC "
-"gateway."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The new gateway appears in the list. You can repeat these steps to add more "
-"gateway for this VPC."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/add-loadbalancer-rule-vpc.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/add-loadbalancer-rule-vpc.po b/docs/ko_KR/add-loadbalancer-rule-vpc.po
deleted file mode 100644
index 29a95ed..0000000
--- a/docs/ko_KR/add-loadbalancer-rule-vpc.po
+++ /dev/null
@@ -1,197 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-02-02 18:33+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Adding Load Balancing Rules on a VPC"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"A &PRODUCT; user or administrator may create load balancing rules that "
-"balance traffic received at a public IP to one or more VMs that belong to a "
-"network tier that provides load balancing service in a VPC. A user creates a"
-" rule, specifies an algorithm, and assigns the rule to a set of VMs within a"
-" VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Configure button of the VPC to which you want to configure load "
-"balancing rules."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The VPC page is displayed where all the tiers you created are listed in a "
-"diagram."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACLs"
-msgstr "네트워크 권한 관리(ACL)"
-
-#. Tag: para
-#, no-c-format
-msgid "Select IP Addresses."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The IP Addresses page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the IP address for which you want to create the rule, then click the "
-"Configuration tab."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Load Balancing node of the diagram, click View All."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select the tier to which you want to apply the rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a VPC, the load balancing service is supported only on a single tier."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Specify the following:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Name</emphasis>: A name for the load balancer rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Public Port</emphasis>: The port that receives the "
-"incoming traffic to be balanced."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Private Port</emphasis>: The port that the VMs will "
-"use to receive the traffic."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Algorithm</emphasis>. Choose the load balancing "
-"algorithm you want &PRODUCT; to use. &PRODUCT; supports the following well-"
-"known algorithms:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Round-robin"
-msgstr "라운드 로빈"
-
-#. Tag: para
-#, no-c-format
-msgid "Least connections"
-msgstr "최소 접속"
-
-#. Tag: para
-#, no-c-format
-msgid "Source"
-msgstr "시작 위치"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Stickiness</emphasis>. (Optional) Click Configure "
-"and choose the algorithm for the stickiness policy. See Sticky Session "
-"Policies for Load Balancer Rules."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Add VMs</emphasis>: Click Add VMs, then select two "
-"or more VMs that will divide the load of incoming traffic, and click Apply."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The new load balancing rule appears in the list. You can repeat these steps "
-"to add more load balancing rules for this IP address."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/add-more-clusters.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/add-more-clusters.po b/docs/ko_KR/add-more-clusters.po
deleted file mode 100644
index b84ff13..0000000
--- a/docs/ko_KR/add-more-clusters.po
+++ /dev/null
@@ -1,28 +0,0 @@
-# 
-# Translators:
-#  <shibaboy@gmail.com>, 2013.
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-01-30 00:13+0000\n"
-"Last-Translator: shibaboy <shibaboy@gmail.com>\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Add More Clusters (Optional)"
-msgstr "Cluster 추가하기 (선택사항)"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You need to tell &PRODUCT; about the hosts that it will manage. Hosts exist "
-"inside clusters, so before you begin adding hosts to the cloud, you must add"
-" at least one cluster."
-msgstr "Host들이 관리될 것이라는 것을 &PRODUCT; 에 알려줘야 한다. 따라서 host들을 cloud에 추가하기 전에 최소 한개 이상의 cluster에 속하게끔 해주어야 한다. "

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/add-portforward-rule-vpc.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/add-portforward-rule-vpc.po b/docs/ko_KR/add-portforward-rule-vpc.po
deleted file mode 100644
index 1a817f2..0000000
--- a/docs/ko_KR/add-portforward-rule-vpc.po
+++ /dev/null
@@ -1,161 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-02-02 18:33+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Adding a Port Forwarding Rule on a VPC"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Log in to the &PRODUCT; UI as an administrator or end user."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the left navigation, choose Network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Select view, select VPC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"All the VPCs that you have created for the account is listed in the page."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the Configure button of the VPC to which you want to deploy the VMs."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The VPC page is displayed where all the tiers you created are listed in a "
-"diagram."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click the Settings icon."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The following options are displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "IP Addresses"
-msgstr "IP 주소"
-
-#. Tag: para
-#, no-c-format
-msgid "Gateways"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Site-to-Site VPN"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network ACLs"
-msgstr "네트워크 권한 관리(ACL)"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Choose an existing IP address or acquire a new IP address. Click the name of"
-" the IP address in the list."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The IP Addresses page is displayed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Click the IP address for which you want to create the rule, then click the "
-"Configuration tab."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "In the Port Forwarding node of the diagram, click View All."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Select the tier to which you want to apply the rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Specify the following:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Public Port</emphasis>: The port to which public "
-"traffic will be addressed on the IP address you acquired in the previous "
-"step."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Private Port</emphasis>: The port on which the "
-"instance is listening for forwarded public traffic."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Protocol</emphasis>: The communication protocol in "
-"use between the two ports."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "TCP"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "UDP"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Add VM</emphasis>: Click Add VM. Select the name of "
-"the instance to which this rule applies, and click Apply."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "You can test the rule by opening an ssh session to the instance."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/add-remove-nic.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/add-remove-nic.po b/docs/ko_KR/add-remove-nic.po
deleted file mode 100644
index 9d5214f..0000000
--- a/docs/ko_KR/add-remove-nic.po
+++ /dev/null
@@ -1,170 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-03-19 14:14+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Reconfiguring Physical Networks in VMs"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; provides you the ability to move VMs between networks and "
-"reconfigure a VM's network. You can remove a VM from a physical network and "
-"add to a new physical network. You can also change the default physical "
-"network of a virtual machine. With this functionality, hybrid or traditional"
-" server loads can be accommodated with ease."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "This feature is supported on XenServer and KVM hypervisors."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following APIs have been added to support this feature. These API calls "
-"can function only while the VM is in running or stopped state."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "addNicToVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The addNicToVirtualMachine API adds a new NIC to the specified VM on a "
-"selected network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "parameter"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "description"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Value"
-msgstr "값"
-
-#. Tag: para
-#, no-c-format
-msgid "virtualmachineid"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The unique ID of the VM to which the NIC is to be added."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "true"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "networkid"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The unique ID of the network the NIC that you add should apply to."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "ipaddress"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The IP address of the VM on the network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "false"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The network and VM must reside in the same zone. Two VMs with the same name "
-"cannot reside in the same network. Therefore, adding a second VM that "
-"duplicates a name on a network will fail."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "removeNicFromVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The removeNicFromVirtualMachine API removes a NIC from the specified VM on a"
-" selected network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The unique ID of the VM from which the NIC is to be removed."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "nicid"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The unique ID of the NIC that you want to remove."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Removing the default NIC is not allowed."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "updateDefaultNicForVirtualMachine"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The updateDefaultNicForVirtualMachine API updates the specified NIC to be "
-"the default one for a selected VM."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The unique ID of the VM for which you want to specify the default NIC."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "The unique ID of the NIC that you want to set as the default one."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/advanced-zone-configuration.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/advanced-zone-configuration.po b/docs/ko_KR/advanced-zone-configuration.po
deleted file mode 100644
index a381690..0000000
--- a/docs/ko_KR/advanced-zone-configuration.po
+++ /dev/null
@@ -1,470 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2012-09-24 02:45+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Advanced Zone Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"After you select Advanced in the Add Zone wizard and click Next, you will be"
-" asked to enter the following details. Then click Next."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Name.</emphasis> A name for the zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">DNS 1 and 2.</emphasis> These are DNS servers for "
-"use by guest VMs in the zone. These DNS servers will be accessed via the "
-"public network you will add later. The public IP addresses for the zone must"
-" have a route to the DNS server named here."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Internal DNS 1 and Internal DNS 2.</emphasis> These "
-"are DNS servers for use by system VMs in the zone(these are VMs used by "
-"&PRODUCT; itself, such as virtual routers, console proxies,and Secondary "
-"Storage VMs.) These DNS servers will be accessed via the management traffic "
-"network interface of the System VMs. The private IP address you provide for "
-"the pods must have a route to the internal DNS server named here."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Network Domain.</emphasis> (Optional) If you want to"
-" assign a special domain name to the guest VM network, specify the DNS "
-"suffix."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Guest CIDR.</emphasis> This is the CIDR that "
-"describes the IP addresses in use in the guest virtual networks in this "
-"zone. For example, 10.1.1.0/24. As a matter of good practice you should set "
-"different CIDRs for different zones. This will make it easier to set up VPNs"
-" between networks in different zones."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Hypervisor.</emphasis> (Introduced in version 3.0.1)"
-" Choose the hypervisor for the first cluster in the zone. You can add "
-"clusters with different hypervisors later, after you finish adding the zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Public.</emphasis> A public zone is available to all"
-" users. A zone that is not public will be assigned to a particular domain. "
-"Only users in that domain will be allowed to create guest VMs in this zone."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Choose which traffic types will be carried by the physical network."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The traffic types are management, public, guest, and storage traffic. For "
-"more information about the types, roll over the icons to display their tool "
-"tips, or see <xref linkend=\"advanced-zone-network-traffic-types\" />. This "
-"screen starts out with one network already configured. If you have multiple "
-"physical networks, you need to add more. Drag and drop traffic types onto a "
-"greyed-out network and it will become active. You can move the traffic icons"
-" from one network to another; for example, if the default traffic types "
-"shown for Network 1 do not match your actual setup, you can move them down. "
-"You can also change the network names if desired."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"(Introduced in version 3.0.1) Assign a network traffic label to each traffic"
-" type on each physical network. These labels must match the labels you have "
-"already defined on the hypervisor host. To assign each label, click the Edit"
-" button under the traffic type icon within each physical network. A popup "
-"dialog appears where you can type the label, then click OK."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"These traffic labels will be defined only for the hypervisor selected for "
-"the first cluster. For all other hypervisors, the labels can be configured "
-"after the zone is created."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Next."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Configure the IP range for public Internet traffic. Enter the following "
-"details, then click Add. If desired, you can repeat this step to add more "
-"public Internet IP ranges. When done, click Next."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Gateway.</emphasis> The gateway in use for these IP "
-"addresses."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Netmask.</emphasis> The netmask associated with this"
-" IP range."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">VLAN.</emphasis> The VLAN that will be used for "
-"public traffic."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Start IP/End IP.</emphasis> A range of IP addresses "
-"that are assumed to be accessible from the Internet and will be allocated "
-"for access to guest networks."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new zone, &PRODUCT; adds the first pod for you. You can always add more"
-" pods later. For an overview of what a pod is, see <xref linkend=\"about-"
-"pods\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To configure the first pod, enter the following, then click Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Pod Name.</emphasis> A name for the pod."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Reserved system gateway.</emphasis> The gateway for "
-"the hosts in that pod."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Reserved system netmask.</emphasis> The network "
-"prefix that defines the pod's subnet. Use CIDR notation."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Start/End Reserved System IP.</emphasis> The IP "
-"range in the management network that &PRODUCT; uses to manage various system"
-" VMs, such as Secondary Storage VMs, Console Proxy VMs, and DHCP. For more "
-"information, see <xref linkend=\"system-reserved-ip-addresses\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Specify a range of VLAN IDs to carry guest traffic for each physical network"
-" (see VLAN Allocation Example ), then click Next."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new pod, &PRODUCT; adds the first cluster for you. You can always add "
-"more clusters later. For an overview of what a cluster is, see <xref linkend"
-"=\"about-clusters\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To configure the first cluster, enter the following, then click Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Hypervisor.</emphasis> (Version 3.0.0 only; in "
-"3.0.1, this field is read only) Choose the type of hypervisor software that "
-"all hosts in this cluster will run. If you choose VMware, additional fields "
-"appear so you can give information about a vSphere cluster. For vSphere "
-"servers, we recommend creating the cluster of hosts in vCenter and then "
-"adding the entire cluster to &PRODUCT;. See Add Cluster: vSphere ."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Cluster name.</emphasis> Enter a name for the "
-"cluster. This can be text of your choosing and is not used by &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new cluster, &PRODUCT; adds the first host for you. You can always add "
-"more hosts later. For an overview of what a host is, see <xref linkend"
-"=\"about-hosts\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"When you deploy &PRODUCT;, the hypervisor host must not have any VMs already"
-" running."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Before you can configure the host, you need to install the hypervisor "
-"software on the host. You will need to know which version of the hypervisor "
-"software version is supported by &PRODUCT; and what additional configuration"
-" is required to ensure the host will work with &PRODUCT;. To find these "
-"installation details, see:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Citrix XenServer Installation for &PRODUCT;"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VMware vSphere Installation and Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "KVM Installation and Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "To configure the first host, enter the following, then click Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Host Name.</emphasis> The DNS name or IP address of "
-"the host."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Username.</emphasis> Usually root."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Password.</emphasis> This is the password for the "
-"user named above (from your XenServer or KVM install)."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Host Tags.</emphasis> (Optional) Any labels that you"
-" use to categorize hosts for ease of maintenance. For example, you can set "
-"to the cloud's HA tag (set in the ha.tag global configuration parameter) if "
-"you want this host to be used only for VMs with the \"high availability\" "
-"feature enabled. For more information, see HA-Enabled Virtual Machines as "
-"well as HA for Hosts, both in the Administration Guide."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new cluster, &PRODUCT; adds the first primary storage server for you. "
-"You can always add more servers later. For an overview of what primary "
-"storage is, see <xref linkend=\"about-primary-storage\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"To configure the first primary storage server, enter the following, then "
-"click Next:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Name.</emphasis> The name of the storage device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Protocol.</emphasis> For XenServer, choose either "
-"NFS, iSCSI, or PreSetup. For KVM, choose NFS, SharedMountPoint, CLVM, and "
-"RBD. For vSphere choose either VMFS (iSCSI or FiberChannel) or NFS. The "
-"remaining fields in the screen vary depending on what you choose here."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "NFS"
-msgstr "NFS"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Server.</emphasis> The IP address or DNS name of the"
-" storage device."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Path.</emphasis> The exported path from the server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Tags (optional).</emphasis> The comma-separated list"
-" of tags for this storage device. It should be an equivalent set or superset"
-" of the tags on your disk offerings."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The tag sets on primary storage across clusters in a Zone must be identical."
-" For example, if cluster A provides primary storage that has tags T1 and T2,"
-" all other clusters in the Zone must also provide primary storage that has "
-"tags T1 and T2."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "iSCSI"
-msgstr "iSCSI"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Target IQN.</emphasis> The IQN of the target. For "
-"example, iqn.1986-03.com.sun:02:01ec9bb549-1271378984."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Lun.</emphasis> The LUN number. For example, 3."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "preSetup"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">SR Name-Label.</emphasis> Enter the name-label of "
-"the SR that has been set up outside &PRODUCT;."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "SharedMountPoint"
-msgstr "SharedMountPoint"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Path.</emphasis> The path on each host that is where"
-" this primary storage is mounted. For example, \"/mnt/primary\"."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VMFS"
-msgstr "VMFS"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Server.</emphasis> The IP address or DNS name of the"
-" vCenter server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Path.</emphasis> A combination of the datacenter "
-"name and the datastore name. The format is \"/\" datacenter name \"/\" "
-"datastore name. For example, \"/cloud.dc.VM/cluster1datastore\"."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In a new zone, &PRODUCT; adds the first secondary storage server for you. "
-"For an overview of what secondary storage is, see <xref linkend=\"about-"
-"secondary-storage\" />."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Before you can fill out this screen, you need to prepare the secondary "
-"storage by setting up NFS shares and installing the latest &PRODUCT; System "
-"VM template. See Adding Secondary Storage :"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">NFS Server.</emphasis> The IP address of the server."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Click Launch."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/alerts.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/alerts.po b/docs/ko_KR/alerts.po
deleted file mode 100644
index cf5e613..0000000
--- a/docs/ko_KR/alerts.po
+++ /dev/null
@@ -1,161 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2012-09-24 02:46+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Alerts"
-msgstr "알림 체계"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following is the list of alert type numbers. The current alerts can be "
-"found by calling listAlerts."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "MEMORY = 0"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "CPU = 1"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "STORAGE =2"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "STORAGE_ALLOCATED = 3"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "PUBLIC_IP = 4"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "PRIVATE_IP = 5"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "HOST = 6"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "USERVM = 7"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "DOMAIN_ROUTER = 8"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "CONSOLE_PROXY = 9"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "ROUTING = 10// lost connection to default route (to the gateway)"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "STORAGE_MISC = 11 // lost connection to default route (to the gateway)"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "USAGE_SERVER = 12 // lost connection to default route (to the gateway)"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"MANAGMENT_NODE = 13 // lost connection to default route (to the gateway)"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "DOMAIN_ROUTER_MIGRATE = 14"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "CONSOLE_PROXY_MIGRATE = 15"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "USERVM_MIGRATE = 16"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "VLAN = 17"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "SSVM = 18"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "USAGE_SERVER_RESULT = 19"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "STORAGE_DELETE = 20;"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"UPDATE_RESOURCE_COUNT = 21; //Generated when we fail to update the resource "
-"count"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "USAGE_SANITY_RESULT = 22;"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "DIRECT_ATTACHED_PUBLIC_IP = 23;"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "LOCAL_STORAGE = 24;"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"RESOURCE_LIMIT_EXCEEDED = 25; //Generated when the resource limit exceeds "
-"the limit. Currently used for recurring snapshots only"
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/asynchronous-commands-example.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/asynchronous-commands-example.po b/docs/ko_KR/asynchronous-commands-example.po
deleted file mode 100644
index 66897eb..0000000
--- a/docs/ko_KR/asynchronous-commands-example.po
+++ /dev/null
@@ -1,165 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2012-09-24 02:46+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Example"
-msgstr "예"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following shows an example of using an asynchronous command. Assume the "
-"API command:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"command=deployVirtualMachine&amp;zoneId=1&amp;serviceOfferingId=1&amp;diskOfferingId=1&amp;templateId=1\n"
-"        "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"CloudStack will immediately return a job ID and any other additional data."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"         &lt;deployvirtualmachineresponse&gt; \n"
-"              &lt;jobid&gt;1&lt;/jobid&gt;\n"
-"             &lt;id&gt;100&lt;/id&gt;\n"
-"         &lt;/deployvirtualmachineresponse&gt;\n"
-"        "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Using the job ID, you can periodically poll for the results by using the "
-"queryAsyncJobResult command."
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid "command=queryAsyncJobResult&amp;jobId=1"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Three possible results could come from this query."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Job is still pending:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"         &lt;queryasyncjobresult&gt; \n"
-"              &lt;jobid&gt;1&lt;/jobid&gt;\n"
-"              &lt;jobstatus&gt;0&lt;/jobstatus&gt;\n"
-"              &lt;jobprocstatus&gt;1&lt;/jobprocstatus&gt;\n"
-"         &lt;/queryasyncjobresult&gt;\n"
-"        "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Job has succeeded:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"            &lt;queryasyncjobresultresponse cloud-stack-version=\"3.0.1.6\"&gt;\n"
-"                  &lt;jobid&gt;1&lt;/jobid&gt;\n"
-"                  &lt;jobstatus&gt;1&lt;/jobstatus&gt;\n"
-"                  &lt;jobprocstatus&gt;0&lt;/jobprocstatus&gt;\n"
-"                 &lt;jobresultcode&gt;0&lt;/jobresultcode&gt;\n"
-"                  &lt;jobresulttype&gt;object&lt;/jobresulttype&gt;\n"
-"                  &lt;jobresult&gt;\n"
-"                    &lt;virtualmachine&gt;\n"
-"                    &lt;id&gt;450&lt;/id&gt;\n"
-"                    &lt;name&gt;i-2-450-VM&lt;/name&gt;\n"
-"                    &lt;displayname&gt;i-2-450-VM&lt;/displayname&gt;\n"
-"                    &lt;account&gt;admin&lt;/account&gt;\n"
-"                    &lt;domainid&gt;1&lt;/domainid&gt;\n"
-"                    &lt;domain&gt;ROOT&lt;/domain&gt;\n"
-"                    &lt;created&gt;2011-03-10T18:20:25-0800&lt;/created&gt;\n"
-"                    &lt;state&gt;Running&lt;/state&gt;\n"
-"                    &lt;haenable&gt;false&lt;/haenable&gt;\n"
-"                    &lt;zoneid&gt;1&lt;/zoneid&gt;\n"
-"                    &lt;zonename&gt;San Jose 1&lt;/zonename&gt;\n"
-"                    &lt;hostid&gt;2&lt;/hostid&gt;\n"
-"                    &lt;hostname&gt;905-13.sjc.lab.vmops.com&lt;/hostname&gt;\n"
-"                    &lt;templateid&gt;1&lt;/templateid&gt;\n"
-"                    &lt;templatename&gt;CentOS 5.3 64bit LAMP&lt;/templatename&gt;\n"
-"                    &lt;templatedisplaytext&gt;CentOS 5.3 64bit LAMP&lt;/templatedisplaytext&gt;\n"
-"                    &lt;passwordenabled&gt;false&lt;/passwordenabled&gt;\n"
-"                    &lt;serviceofferingid&gt;1&lt;/serviceofferingid&gt;\n"
-"                    &lt;serviceofferingname&gt;Small Instance&lt;/serviceofferingname&gt;\n"
-"                    &lt;cpunumber&gt;1&lt;/cpunumber&gt;\n"
-"                    &lt;cpuspeed&gt;500&lt;/cpuspeed&gt;\n"
-"                    &lt;memory&gt;512&lt;/memory&gt;\n"
-"                    &lt;guestosid&gt;12&lt;/guestosid&gt;\n"
-"                    &lt;rootdeviceid&gt;0&lt;/rootdeviceid&gt;\n"
-"                    &lt;rootdevicetype&gt;NetworkFilesystem&lt;/rootdevicetype&gt;\n"
-"                    &lt;nic&gt;\n"
-"                      &lt;id&gt;561&lt;/id&gt;\n"
-"                      &lt;networkid&gt;205&lt;/networkid&gt;\n"
-"                      &lt;netmask&gt;255.255.255.0&lt;/netmask&gt;\n"
-"                      &lt;gateway&gt;10.1.1.1&lt;/gateway&gt;\n"
-"                      &lt;ipaddress&gt;10.1.1.225&lt;/ipaddress&gt;\n"
-"                      &lt;isolationuri&gt;vlan://295&lt;/isolationuri&gt;\n"
-"                      &lt;broadcasturi&gt;vlan://295&lt;/broadcasturi&gt;\n"
-"                      &lt;traffictype&gt;Guest&lt;/traffictype&gt;\n"
-"                      &lt;type&gt;Virtual&lt;/type&gt;\n"
-"                      &lt;isdefault&gt;true&lt;/isdefault&gt;\n"
-"                    &lt;/nic&gt;\n"
-"                    &lt;hypervisor&gt;XenServer&lt;/hypervisor&gt;\n"
-"                   &lt;/virtualmachine&gt;\n"
-"                 &lt;/jobresult&gt;\n"
-"            &lt;/queryasyncjobresultresponse&gt;\n"
-"        "
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Job has failed:"
-msgstr ""
-
-#. Tag: programlisting
-#, no-c-format
-msgid ""
-"\n"
-"            &lt;queryasyncjobresult&gt;\n"
-"                  &lt;jobid&gt;1&lt;/jobid&gt; \n"
-"                  &lt;jobstatus&gt;2&lt;/jobstatus&gt; \n"
-"                  &lt;jobprocstatus&gt;0&lt;/jobprocstatus&gt;\n"
-"                  &lt;jobresultcode&gt;551&lt;/jobresultcode&gt;\n"
-"                  &lt;jobresulttype&gt;text&lt;/jobresulttype&gt;\n"
-"                  &lt;jobresult&gt;Unable to deploy virtual machine id = 100 due to not enough capacity&lt;/jobresult&gt; \n"
-"            &lt;/queryasyncjobresult&gt;\n"
-"        "
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/autoscale.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/autoscale.po b/docs/ko_KR/autoscale.po
deleted file mode 100644
index f25f073..0000000
--- a/docs/ko_KR/autoscale.po
+++ /dev/null
@@ -1,442 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-02-02 18:34+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Configuring AutoScale"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"AutoScaling allows you to scale your back-end services or application VMs up"
-" or down seamlessly and automatically according to the conditions you "
-"define. With AutoScaling enabled, you can ensure that the number of VMs you "
-"are using seamlessly scale up when demand increases, and automatically "
-"decreases when demand subsides. Thus it helps you save compute costs by "
-"terminating underused VMs automatically and launching new VMs when you need "
-"them, without the need for manual intervention."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"NetScaler AutoScaling is designed to seamlessly launch or terminate VMs "
-"based on user-defined conditions. Conditions for triggering a scaleup or "
-"scaledown action can vary from a simple use case like monitoring the CPU "
-"usage of a server to a complex use case of monitoring a combination of "
-"server's responsiveness and its CPU usage. For example, you can configure "
-"AutoScaling to launch an additional VM whenever CPU usage exceeds 80 percent"
-" for 15 minutes, or to remove a VM whenever CPU usage is less than 20 "
-"percent for 30 minutes."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"&PRODUCT; uses the NetScaler load balancer to monitor all aspects of a "
-"system's health and work in unison with &PRODUCT; to initiate scale-up or "
-"scale-down actions."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "AutoScale is supported on NetScaler Release 10 Build 73.e and beyond."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Prerequisites"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Before you configure an AutoScale rule, consider the following:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Ensure that the necessary template is prepared before configuring AutoScale."
-" When a VM is deployed by using a template and when it comes up, the "
-"application should be up and running."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If the application is not running, the NetScaler device considers the VM as "
-"ineffective and continues provisioning the VMs unconditionally until the "
-"resource limit is exhausted."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Deploy the templates you prepared. Ensure that the applications come up on "
-"the first boot and is ready to take the traffic. Observe the time requires "
-"to deploy the template. Consider this time when you specify the quiet time "
-"while configuring AutoScale."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The AutoScale feature supports the SNMP counters that can be used to define "
-"conditions for taking scale up or scale down actions. To monitor the SNMP-"
-"based counter, ensure that the SNMP agent is installed in the template used "
-"for creating the AutoScale VMs, and the SNMP operations work with the "
-"configured SNMP community and port by using standard SNMP managers. For "
-"example, see <xref linkend=\"configure-snmp-rhel\" /> to configure SNMP on a"
-" RHEL machine."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Ensure that the endpointe.url parameter present in the Global Settings is "
-"set to the Management Server API URL. For example, "
-"http://10.102.102.22:8080/client/api. In a multi-node Management Server "
-"deployment, use the virtual IP address configured in the load balancer for "
-"the management server’s cluster. Additionally, ensure that the NetScaler "
-"device has access to this IP address to provide AutoScale support."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you update the endpointe.url, disable the AutoScale functionality of the "
-"load balancer rules in the system, then enable them back to reflect the "
-"changes. For more information see <xref linkend=\"update-autoscale\" />"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If the API Key and Secret Key are regenerated for an AutoScale user, ensure "
-"that the AutoScale functionality of the load balancers that the user "
-"participates in are disabled and then enabled to reflect the configuration "
-"changes in the NetScaler."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"In an advanced Zone, ensure that at least one VM should be present before "
-"configuring a load balancer rule with AutoScale. Having one VM in the "
-"network ensures that the network is in implemented state for configuring "
-"AutoScale."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Configuration"
-msgstr "구성"
-
-#. Tag: para
-#, no-c-format
-msgid "Specify the following:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Template</emphasis>: A template consists of a base "
-"OS image and application. A template is used to provision the new instance "
-"of an application on a scaleup action. When a VM is deployed from a "
-"template, the VM can start taking the traffic from the load balancer without"
-" any admin intervention. For example, if the VM is deployed for a Web "
-"service, it should have the Web server running, the database connected, and "
-"so on."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Compute offering</emphasis>: A predefined set of "
-"virtual hardware attributes, including CPU speed, number of CPUs, and RAM "
-"size, that the user can select when creating a new virtual machine instance."
-" Choose one of the compute offerings to be used while provisioning a VM "
-"instance as part of scaleup action."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Min Instance</emphasis>: The minimum number of "
-"active VM instances that is assigned to a load balancing rule. The active VM"
-" instances are the application instances that are up and serving the "
-"traffic, and are being load balanced. This parameter ensures that a load "
-"balancing rule has at least the configured number of active VM instances are"
-" available to serve the traffic."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If an application, such as SAP, running on a VM instance is down for some "
-"reason, the VM is then not counted as part of Min Instance parameter, and "
-"the AutoScale feature initiates a scaleup action if the number of active VM "
-"instances is below the configured value. Similarly, when an application "
-"instance comes up from its earlier down state, this application instance is "
-"counted as part of the active instance count and the AutoScale process "
-"initiates a scaledown action when the active instance count breaches the Max"
-" instance value."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Max Instance</emphasis>: Maximum number of active VM"
-" instances that <emphasis role=\"bold\">should be assigned to </emphasis>a "
-"load balancing rule. This parameter defines the upper limit of active VM "
-"instances that can be assigned to a load balancing rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Specifying a large value for the maximum instance parameter might result in "
-"provisioning large number of VM instances, which in turn leads to a single "
-"load balancing rule exhausting the VM instances limit specified at the "
-"account or domain level."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If an application, such as SAP, running on a VM instance is down for some "
-"reason, the VM is not counted as part of Max Instance parameter. So there "
-"may be scenarios where the number of VMs provisioned for a scaleup action "
-"might be more than the configured Max Instance value. Once the application "
-"instances in the VMs are up from an earlier down state, the AutoScale "
-"feature starts aligning to the configured Max Instance value."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Specify the following scale-up and scale-down policies:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Duration</emphasis>: The duration, in seconds, for "
-"which the conditions you specify must be true to trigger a scaleup action. "
-"The conditions defined should hold true for the entire duration you specify "
-"for an AutoScale action to be invoked."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Counter</emphasis>: The performance counters expose "
-"the state of the monitored instances. By default, &PRODUCT; offers four "
-"performance counters: Three SNMP counters and one NetScaler counter. The "
-"SNMP counters are Linux User CPU, Linux System CPU, and Linux CPU Idle. The "
-"NetScaler counter is ResponseTime. The root administrator can add additional"
-" counters into &PRODUCT; by using the &PRODUCT; API."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Operator</emphasis>: The following five relational "
-"operators are supported in AutoScale feature: Greater than, Less than, Less "
-"than or equal to, Greater than or equal to, and Equal to."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Threshold</emphasis>: Threshold value to be used for"
-" the counter. Once the counter defined above breaches the threshold value, "
-"the AutoScale feature initiates a scaleup or scaledown action."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "<emphasis role=\"bold\">Add</emphasis>: Click Add to add the condition."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Additionally, if you want to configure the advanced settings, click Show "
-"advanced settings, and specify the following:"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Polling interval</emphasis>: Frequency in which the "
-"conditions, combination of counter, operator and threshold, are to be "
-"evaluated before taking a scale up or down action. The default polling "
-"interval is 30 seconds."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Quiet Time</emphasis>: This is the cool down period "
-"after an AutoScale action is initiated. The time includes the time taken to "
-"complete provisioning a VM instance from its template and the time taken by "
-"an application to be ready to serve traffic. This quiet time allows the "
-"fleet to come up to a stable state before any action can take place. The "
-"default is 300 seconds."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Destroy VM Grace Period</emphasis>: The duration in "
-"seconds, after a scaledown action is initiated, to wait before the VM is "
-"destroyed as part of scaledown action. This is to ensure graceful close of "
-"any pending sessions or transactions being served by the VM marked for "
-"destroy. The default is 120 seconds."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Security Groups</emphasis>: Security groups provide "
-"a way to isolate traffic to the VM instances. A security group is a group of"
-" VMs that filter their incoming and outgoing traffic according to a set of "
-"rules, called ingress and egress rules. These rules filter network traffic "
-"according to the IP address that is attempting to communicate with the VM."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Disk Offerings</emphasis>: A predefined set of disk "
-"size for primary data storage."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">SNMP Community</emphasis>: The SNMP community string"
-" to be used by the NetScaler device to query the configured counter value "
-"from the provisioned VM instances. Default is public."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">SNMP Port</emphasis>: The port number on which the "
-"SNMP agent that run on the provisioned VMs is listening. Default port is "
-"161."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">User</emphasis>: This is the user that the NetScaler"
-" device use to invoke scaleup and scaledown API calls to the cloud. If no "
-"option is specified, the user who configures AutoScaling is applied. Specify"
-" another user name to override."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"<emphasis role=\"bold\">Apply</emphasis>: Click Apply to create the "
-"AutoScale configuration."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Disabling and Enabling an AutoScale Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"If you want to perform any maintenance operation on the AutoScale VM "
-"instances, disable the AutoScale configuration. When the AutoScale "
-"configuration is disabled, no scaleup or scaledown action is performed. You "
-"can use this downtime for the maintenance activities. To disable the "
-"AutoScale configuration, click the Disable AutoScale<inlinemediaobject> "
-"<imageobject> <imagedata fileref=\"./images/enable-disable-autoscale.png\" "
-"/> </imageobject> <textobject> <phrase>EnableDisable.png: button to enable "
-"or disable AutoScale.</phrase> </textobject> </inlinemediaobject>button."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The button toggles between enable and disable, depending on whether "
-"AutoScale is currently enabled or not. After the maintenance operations are "
-"done, you can enable the AutoScale configuration back. To enable, open the "
-"AutoScale configuration page again, then click the Enable "
-"AutoScale<inlinemediaobject> <imageobject> <imagedata fileref=\"./images"
-"/enable-disable-autoscale.png\" /> </imageobject> <textobject> "
-"<phrase>EnableDisable.png: button to enable or disable AutoScale.</phrase> "
-"</textobject> </inlinemediaobject>button."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Updating an AutoScale Configuration"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"You can update the various parameters and add or delete the conditions in a "
-"scaleup or scaledown rule. Before you update an AutoScale configuration, "
-"ensure that you disable the AutoScale load balancer rule by clicking the "
-"Disable AutoScale button."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"After you modify the required AutoScale parameters, click Apply. To apply "
-"the new AutoScale policies, open the AutoScale configuration page again, "
-"then click the Enable AutoScale button."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Runtime Considerations"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"An administrator should not assign a VM to a load balancing rule which is "
-"configured for AutoScale."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Before a VM provisioning is completed if NetScaler is shutdown or restarted,"
-" the provisioned VM cannot be a part of the load balancing rule though the "
-"intent was to assign it to a load balancing rule. To workaround, rename the "
-"AutoScale provisioned VMs based on the rule name or ID so at any point of "
-"time the VMs can be reconciled to its load balancing rule."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Making API calls outside the context of AutoScale, such as destroyVM, on an "
-"autoscaled VM leaves the load balancing configuration in an inconsistent "
-"state. Though VM is destroyed from the load balancer rule, NetScaler "
-"continues to show the VM as a service assigned to a rule."
-msgstr ""

http://git-wip-us.apache.org/repos/asf/incubator-cloudstack/blob/ccd74602/docs/ko_KR/basic-adv-networking.po
----------------------------------------------------------------------
diff --git a/docs/ko_KR/basic-adv-networking.po b/docs/ko_KR/basic-adv-networking.po
deleted file mode 100644
index 8f8a40b..0000000
--- a/docs/ko_KR/basic-adv-networking.po
+++ /dev/null
@@ -1,202 +0,0 @@
-# 
-# Translators:
-msgid ""
-msgstr ""
-"Project-Id-Version: Apache CloudStack Docs\n"
-"POT-Creation-Date: 2013-03-19T13:38:02\n"
-"PO-Revision-Date: 2013-02-02 18:35+0000\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: None\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ko_KR\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Tag: title
-#, no-c-format
-msgid "Basic and Advanced Networking"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "&PRODUCT; provides two styles of networking:."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Basic"
-msgstr "기본"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For AWS-style networking. Provides a single network where guest isolation "
-"can be provided through layer-3 means such as security groups (IP address "
-"source filtering)."
-msgstr ""
-
-#. Tag: title
-#, no-c-format
-msgid "Advanced"
-msgstr "확장"
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"For more sophisticated network topologies. This network model provides the "
-"most flexibility in defining guest networks, but requires more configuration"
-" steps than basic networking."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Each zone has either basic or advanced networking. Once the choice of "
-"networking model for a zone has been made and configured in &PRODUCT;, it "
-"can not be changed. A zone is either basic or advanced for its entire "
-"lifetime."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The following table compares the networking features in the two networking "
-"models."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Networking Feature"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Basic Network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Advanced Network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Number of networks"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Single network"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Multiple networks"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Firewall type"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Physical"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Physical and Virtual"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Load balancer"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Isolation type"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Layer 3"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Layer 2 and Layer 3"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "VPN support"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "No"
-msgstr "아니오"
-
-#. Tag: para
-#, no-c-format
-msgid "Yes"
-msgstr "예"
-
-#. Tag: para
-#, no-c-format
-msgid "Port forwarding"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "1:1 NAT"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Source NAT"
-msgstr "전송원 NAT"
-
-#. Tag: para
-#, no-c-format
-msgid "Userdata"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Network usage monitoring"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "sFlow / netFlow at physical router"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "Hypervisor and Virtual Router"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid "DNS and DHCP"
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"The two types of networking may be in use in the same cloud. However, a "
-"given zone must use either Basic Networking or Advanced Networking."
-msgstr ""
-
-#. Tag: para
-#, no-c-format
-msgid ""
-"Different types of network traffic can be segmented on the same physical "
-"network. Guest traffic can also be segmented by account. To isolate traffic,"
-" you can use separate VLANs. If you are using separate VLANs on a single "
-"physical network, make sure the VLAN tags are in separate numerical ranges."
-msgstr ""


Mime
View raw message