incubator-cassandra-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Techy Teck <comptechge...@gmail.com>
Subject Re: Not able to form a Cassandra cluster of two nodes in Windows?
Date Fri, 01 Nov 2013 17:02:04 GMT
In my case, both of my laptop are running Windows 7 64 bit.. Not sure
what's the problem...


On Fri, Nov 1, 2013 at 4:48 AM, Aaron Mintz <aaron.m.mintz@gmail.com> wrote:

> One issue I ran into that produced similar symptoms: if you have
> internode_compression turned on without the proper snappy library available
> for your architecture (i had 64-bit linux), starting up will fail to link
> the nodes. It'll also be silent unless you set a certain class logging
> level to DEBUG, but it basically presented as if nodes would each form
> their own single-machine ring
>
>
> On Fri, Nov 1, 2013 at 3:52 AM, Techy Teck <comptechgeeky@gmail.com>wrote:
>
>> I am trying to setup two nodes of Cassandra cluster on my windows
>> machine. Basically, I have two windows machine. In both of my machine, I
>> have installed Cassandra 1.2.11 from Datastax. Now I was following this
>> [tutorial](
>> http://www.datastax.com/2012/01/how-to-setup-and-monitor-a-multi-node-cassandra-cluster-on-windows)
>> to setup two node Cassandra Cluster.
>>
>> After installing Cassandra into those two machines, I stopped the
>> services for the Cassandra server, DataStax OpsCenter, and the DataStax
>> OpsCenter agent in those two machines..
>>
>> And then I started making changes in the yaml file -
>>
>> My First Node details are -
>>
>>     initial_token: 0
>>     seeds: "10.0.0.4"
>>     listen_address: 10.0.0.4   #IP of Machine - A (Wireless LAN adapter
>> Wireless Network Connection)
>>     rpc_address: 10.0.0.4
>>
>> My Second Node details are -
>>
>>     initial_token: 0
>>     seeds: "10.0.0.4"
>>     listen_address: 10.0.0.7   #IP of Machine - B (Wireless LAN adapter
>> Wireless Network Connection)
>>     rpc_address: 10.0.0.7
>>
>> Both of my serves gets started up properly after I start the services for
>> server. But they are not forming a cluster of two nodes somehow? Is there
>> anything I am missing here?
>>
>> Machine-A Nodetool Information-
>>
>>     Datacenter: datacenter1
>>     ==========
>>     Replicas: 1
>>
>>     Address   Rack        Status State   Load
>> Owns                Token
>>
>>
>>     10.0.0.4  rack1       Up     Normal  212.1 KB
>> 100.00%             5264744098649860606
>>
>> Machine-B Nodetool Information-
>>
>>     Starting NodeTool
>>
>>     Datacenter: datacenter1
>>     ==========
>>     Replicas: 1
>>
>>     Address   Rack        Status State   Load
>> Owns                Token
>>
>>
>>     10.0.0.7  rack1       Up     Normal  68.46 KB
>> 100.00%             407804996740764696
>>
>>
>>
>

Mime
View raw message