incubator-ambari-user mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Robin Carnow <ro...@goldbot.com>
Subject Re: Compatible Versions of Ganglia and Nagios
Date Tue, 02 Apr 2013 23:10:46 GMT
After following the instructions for Option I, I have found that the
following link does not work:

http://public-repo-1.hortonworks.com/HDP-UTILS-1.1.0.15/repos/centos6/HDP-UTILS-1.1.015-centos6.tar.gz

Is it missing from the server?


~Robin


On Thu, Nov 8, 2012 at 4:36 PM, Robin Carnow <robin@goldbot.com> wrote:

> Thank you Ravi and Hitesh.  I will take a look.
>
>
> On Thu, Nov 8, 2012 at 4:28 PM, Hitesh Shah <hitesh@hortonworks.com>wrote:
>
>> Ambari does not download rpms from a central location but it relies on
>> yum install which in turn depends on the repo configuration. Therefore, for
>> instaling in such environments, what you probably need is to create a local
>> yum mirror or proxies for both the HDP and epel repos.
>>
>> For more details, you can look at
>> http://docs.hortonworks.com/CURRENT/index.htm#Appendix/Deploying_HDP_In_Production_Data_Centers_with_Firewalls/Deploying_HDP_In_Production_Data_Centers.htm
>>
>> -- Hitesh
>>
>>
>> On Nov 8, 2012, at 1:14 PM, Robin Carnow wrote:
>>
>> > Thank you very much for a quick and thorough response.
>> >
>> > I am in an environment where I cannot connect to the Internet so will
>> Ambari still be able to install both ganglia and nagios? Or will I have to
>> put the rpms either on the master or on the nodes during install of
>> ambari-agent?
>> >
>> > I am in the process of collecting what I need so I can install Ambari
>> in this disconnected environment.
>> >
>> > Regards,
>> >
>> > Rob
>> >
>> >
>> >
>> > On Thu, Nov 8, 2012 at 3:19 PM, Hitesh Shah <hitesh@hortonworks.com>
>> wrote:
>> > Hi Rob,
>> >
>> > For nagios, it works with Nagios-3.2.3 ( the puppet modules have been
>> hardcoded to it as some configs generated were only tested with that
>> particular version), You are welcome to try changing the version and
>> providing a patch if you can get it to work with a newer version.
>> >
>> > For ganglia, we discovered some bugs in the version we tried with (
>> 3.2.0 ) that caused problems both in the hadoop layer as well as the
>> ganglia layer. The HDP repo that is documented provides a patched version
>> of libganglia, ganglia-[gmond|gmetad|...]-3.2.0-99 with fixes that Ambari
>> is compatible with. I believe the patches were finally committed to ganglia
>> and should be available in the latest release - however, similar to nagios,
>> the new versions have not been tested against.
>> >
>> > The same versions hold for both 0.9 and trunk.
>> >
>> > FWIW, Ambari will install and configure both ganglia and nagios for you
>> so you will likely not need to do any pre-install/setup for the monitoring
>> layer.
>> >
>> > -- Hitesh
>> >
>> >
>> > On Nov 8, 2012, at 11:51 AM, Robin Carnow wrote:
>> >
>> > > Hi,
>> > >
>> > > I'm new to Ambari and I was wondering what versions of Ganglia and
>> Nagios are compatible with the 0.9 version and the trunk version.  So what
>> versions should I be running on the nodes?
>> > >
>> > > I was not able to find this on the website.
>> > >
>> > >
>> > > Thanks,
>> > > Rob
>> >
>> >
>>
>>
>

Mime
View raw message