ignite-issues mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Vasilisa Sidorova (JIRA)" <j...@apache.org>
Subject [jira] [Updated] (IGNITE-1943) visorcmd: wrong behavior for "mclear" command
Date Wed, 18 Nov 2015 13:33:10 GMT

     [ https://issues.apache.org/jira/browse/IGNITE-1943?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]

Vasilisa  Sidorova updated IGNITE-1943:
---------------------------------------
    Description: 
---------------------------------------------
DESCRIPTION
---------------------------------------------
"mclear" should clears all Visor console variables before they will be updated during next
run of the corresponding command. It OK for all type of shortcut (@cX, @tX, @aX, @eX) exept
shortcut for node-id variables. After "mclear" @nX are disappear from any statistics 
---------------------------------------------
STEPS FOR REPRODUCE
---------------------------------------------
# Start cluster
# Start visorcmd ([IGNITE_HOME]/bin/ignitevisorcmd.sh)
# Connect to the ctarted cluster (visor> open)
# Execute any tasks in it (for example, run any example from EventsExample, DeploymentExample,
ComputeContinuousMapperExample, ComputeTaskMapExample, ComputeTaskSplitExample) 
# Create several alerts (visor> alert)
# Run visor "mclear" command
# Run visor "node" command
---------------------------------------------
ACTUAL RESULT
---------------------------------------------
There isn't @nX values in the first table's column:
{noformat}
visor> node
Select node from:
+==================================================================+
| # |   Node ID8(@), IP   | Up Time  | CPUs | CPU Load | Free Heap |
+==================================================================+
| 0 | 6B3E4033, 127.0.0.1 | 00:38:41 | 8    | 0.20 %   | 97.00 %   |
| 1 | 0A0D6989, 127.0.0.1 | 00:38:22 | 8    | 0.17 %   | 97.00 %   |
| 2 | 0941E33F, 127.0.0.1 | 00:35:46 | 8    | 0.23 %   | 97.00 %   |
+------------------------------------------------------------------+
{noformat}
---------------------------------------------
EXPECTED RESULT
---------------------------------------------
There is @nX values in the first table's column:
{noformat}
visor> node
Select node from:
+=======================================================================+
| # |     Node ID8(@), IP      | Up Time  | CPUs | CPU Load | Free Heap |
+=======================================================================+
| 0 | 6B3E4033(@n0), 127.0.0.1 | 00:38:13 | 8    | 0.23 %   | 97.00 %   |
| 1 | 0A0D6989(@n1), 127.0.0.1 | 00:37:54 | 8    | 0.27 %   | 97.00 %   |
| 2 | 0941E33F(@n2), 127.0.0.1 | 00:35:18 | 8    | 0.20 %   | 97.00 %   |
+-----------------------------------------------------------------------+
{noformat}

"mclear" should get effect only for "mget @nX" command (with result "Missing variable with
name: '@nX'") and @ variables  should get new values after "node" (or "tasks") command execution.
Like in case for all others @ variables (@cX, @tX, @aX, @eX) 


  was:
---------------------------------------------
DESCRIPTION
---------------------------------------------
"mclear" should clears all Visor console variables before they will be updated during next
run of the corresponding command. It OK for all type of shortcut (@cX, @tX, @aX, @eX) exept
shortcut for node-id variables. After "mclear" @nX are disappear from any statistic 
---------------------------------------------
STEPS FOR REPRODUCE
---------------------------------------------
# Start cluster
# Start visorcmd ([IGNITE_HOME]/bin/ignitevisorcmd.sh)
# Connect to the ctarted cluster (visor> open)
# Execute any tasks in it (for example, run any example from EventsExample, DeploymentExample,
ComputeContinuousMapperExample, ComputeTaskMapExample, ComputeTaskSplitExample) 
# Create several alerts (visor> alert)
# Run visor "mclear" command
# Run visor "node" command
---------------------------------------------
ACTUAL RESULT
---------------------------------------------
There isn't @nX values in the first table's column:
{noformat}
visor> node
Select node from:
+==================================================================+
| # |   Node ID8(@), IP   | Up Time  | CPUs | CPU Load | Free Heap |
+==================================================================+
| 0 | 6B3E4033, 127.0.0.1 | 00:38:41 | 8    | 0.20 %   | 97.00 %   |
| 1 | 0A0D6989, 127.0.0.1 | 00:38:22 | 8    | 0.17 %   | 97.00 %   |
| 2 | 0941E33F, 127.0.0.1 | 00:35:46 | 8    | 0.23 %   | 97.00 %   |
+------------------------------------------------------------------+
{noformat}
---------------------------------------------
EXPECTED RESULT
---------------------------------------------
There is @nX values in the first table's column:
{noformat}
visor> node
Select node from:
+=======================================================================+
| # |     Node ID8(@), IP      | Up Time  | CPUs | CPU Load | Free Heap |
+=======================================================================+
| 0 | 6B3E4033(@n0), 127.0.0.1 | 00:38:13 | 8    | 0.23 %   | 97.00 %   |
| 1 | 0A0D6989(@n1), 127.0.0.1 | 00:37:54 | 8    | 0.27 %   | 97.00 %   |
| 2 | 0941E33F(@n2), 127.0.0.1 | 00:35:18 | 8    | 0.20 %   | 97.00 %   |
+-----------------------------------------------------------------------+
{noformat}

"mclear" should get effect only for "mget @nX" command (with result "Missing variable with
name: '@nX'") and @ variables  should get new values after "node" (or "tasks") command execution.
Like in case for all others @ variables (@cX, @tX, @aX, @eX) 



> visorcmd: wrong behavior for "mclear" command
> ---------------------------------------------
>
>                 Key: IGNITE-1943
>                 URL: https://issues.apache.org/jira/browse/IGNITE-1943
>             Project: Ignite
>          Issue Type: Bug
>          Components: wizards
>    Affects Versions: 1.5
>            Reporter: Vasilisa  Sidorova
>             Fix For: 1.6
>
>
> ---------------------------------------------
> DESCRIPTION
> ---------------------------------------------
> "mclear" should clears all Visor console variables before they will be updated during
next run of the corresponding command. It OK for all type of shortcut (@cX, @tX, @aX, @eX)
exept shortcut for node-id variables. After "mclear" @nX are disappear from any statistics

> ---------------------------------------------
> STEPS FOR REPRODUCE
> ---------------------------------------------
> # Start cluster
> # Start visorcmd ([IGNITE_HOME]/bin/ignitevisorcmd.sh)
> # Connect to the ctarted cluster (visor> open)
> # Execute any tasks in it (for example, run any example from EventsExample, DeploymentExample,
ComputeContinuousMapperExample, ComputeTaskMapExample, ComputeTaskSplitExample) 
> # Create several alerts (visor> alert)
> # Run visor "mclear" command
> # Run visor "node" command
> ---------------------------------------------
> ACTUAL RESULT
> ---------------------------------------------
> There isn't @nX values in the first table's column:
> {noformat}
> visor> node
> Select node from:
> +==================================================================+
> | # |   Node ID8(@), IP   | Up Time  | CPUs | CPU Load | Free Heap |
> +==================================================================+
> | 0 | 6B3E4033, 127.0.0.1 | 00:38:41 | 8    | 0.20 %   | 97.00 %   |
> | 1 | 0A0D6989, 127.0.0.1 | 00:38:22 | 8    | 0.17 %   | 97.00 %   |
> | 2 | 0941E33F, 127.0.0.1 | 00:35:46 | 8    | 0.23 %   | 97.00 %   |
> +------------------------------------------------------------------+
> {noformat}
> ---------------------------------------------
> EXPECTED RESULT
> ---------------------------------------------
> There is @nX values in the first table's column:
> {noformat}
> visor> node
> Select node from:
> +=======================================================================+
> | # |     Node ID8(@), IP      | Up Time  | CPUs | CPU Load | Free Heap |
> +=======================================================================+
> | 0 | 6B3E4033(@n0), 127.0.0.1 | 00:38:13 | 8    | 0.23 %   | 97.00 %   |
> | 1 | 0A0D6989(@n1), 127.0.0.1 | 00:37:54 | 8    | 0.27 %   | 97.00 %   |
> | 2 | 0941E33F(@n2), 127.0.0.1 | 00:35:18 | 8    | 0.20 %   | 97.00 %   |
> +-----------------------------------------------------------------------+
> {noformat}
> "mclear" should get effect only for "mget @nX" command (with result "Missing variable
with name: '@nX'") and @ variables  should get new values after "node" (or "tasks") command
execution. Like in case for all others @ variables (@cX, @tX, @aX, @eX) 



--
This message was sent by Atlassian JIRA
(v6.3.4#6332)

Mime
View raw message