ignite-dev mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Valentin Kulichenko <valentin.kuliche...@gmail.com>
Subject Re: ScanQuery With BinaryObject
Date Wed, 05 Apr 2017 08:40:07 GMT
Can you provide the test?

-Val

On Wed, Apr 5, 2017 at 1:37 AM, Andrey Mashenkov <andrey.mashenkov@gmail.com
> wrote:

> Hi Val,
>
> I run test with no filter class in server classpath. I've got an error
> wiith peerClassLoading disabled, which is ok as server can't unmarshal
> filter object.
> But with peerClassLoading enabled, query works fine but looks like filter
> class won't be updated on server.
>
> On Wed, Apr 5, 2017 at 11:14 AM, Valentin Kulichenko <
> valentin.kulichenko@gmail.com> wrote:
>
> > Andrey,
> >
> > Marshaller cache does not store classes, only class names. So I'm not
> sure
> > what you mean by this.
> >
> > I looked at the code and it seems I was wrong - peer class loading does
> > work for scan query filter, which is good. But as I mentioned before, if
> > the class is available on local classpath, it will never be dynamically
> > loaded, even if peer class loading is enabled. Therefore server will not
> > know about any changes happening to the class definition on the client.
> > This is correct behavior.
> >
> > -Val
> >
> > On Wed, Apr 5, 2017 at 12:01 AM, Andrey Mashenkov <
> > andrey.mashenkov@gmail.com> wrote:
> >
> > > Hi Val,
> > >
> > > Filter object serialized and send inside GridCacheQueryRequest, and
> then
> > it
> > > is deserialized on server side and loaded by cache class loader.
> > > Looks like filter class is cached in marshaller cache.
> > >
> > >
> > > On Tue, Apr 4, 2017 at 4:43 PM, Valentin Kulichenko <
> > > valentin.kulichenko@gmail.com> wrote:
> > >
> > > > Andrey,
> > > >
> > > > To my knowledge, peer class loading is not supported for scan query
> > > > filters, but I'm not sure though. Can you please check?
> > > >
> > > > Note that this actually doesn't matter if the class is available on
> > > > server's local classpath. In this case it will be always used
> > regardless
> > > of
> > > > any changes done on a client (i.e. will never be dynamically loaded).
> > > This
> > > > is true for any functionality, including Compute Grid.
> > > >
> > > > -Val
> > > >
> > > > On Mon, Apr 3, 2017 at 10:19 AM, Andrey Mashenkov <
> > > > andrey.mashenkov@gmail.com> wrote:
> > > >
> > > > > Crossposted to dev:
> > > > >
> > > > > Guys,
> > > > >
> > > > > ScanQuery filter code (see IgniteBiPredicate implementation below)
> > can
> > > be
> > > > > cached on server side
> > > > > that can cause unexpected results.
> > > > > The main point here is server node never restarts while client does
> > it
> > > > with
> > > > > filter code changed.
> > > > >
> > > > > Is it ok?
> > > > >
> > > > > I try to add *serialVersionUID* and it was useless. The only class
> > > > renaming
> > > > > was helpful.
> > > > >
> > > > >
> > > > > ---------- Forwarded message ----------
> > > > > From: David Li <david.li.sg@gmail.com>
> > > > > Date: Mon, Apr 3, 2017 at 9:24 AM
> > > > > Subject: Re: ScanQuery With BinaryObject
> > > > > To: user@ignite.apache.org
> > > > >
> > > > >
> > > > > Sorry, please ignore the previous email, it was sent by mistake.
> > > > >
> > > > > 1. I download apache-ignite-fabric-1.9.0-bin.zip, and unzip it.
> > > > > 2. In terminal, I start an ignite instance by *bin/ignite.sh
> > > > > examples/config/example-ignite.xml*
> > > > > 3. I create a Java application, source code as below:
> > > > >
> > > > > public static void main(String[] args) {
> > > > >     String ORG_CACHE = "org_cache_remote";
> > > > >    * Ignition.setClientMode(true);*
> > > > >     Ignite ignite = Ignition.start("example-ignite.xml");
> > > > >     CacheConfiguration<Long, Organization> orgCacheCfg = new
> > > > > CacheConfiguration<>(ORG_CACHE);
> > > > >     orgCacheCfg.setIndexedTypes(Long.class, Organization.class);
> > > > >     ignite.destroyCache(ORG_CACHE);
> > > > >     IgniteCache<Long, Organization> cache = ignite.createCache(
> > > > > orgCacheCfg);
> > > > >     cache.put(1L, new Organization(1L, "org1", true, "jurong east",
> > > > > "1111"));
> > > > >     cache.put(2L, new Organization(2L, "org2", false, "orchard",
> > > > "2222"));
> > > > >     cache.put(3L, new Organization(3L, "org3", true, "jurong west",
> > > > > "3333"));
> > > > >     cache.put(4L, new Organization(4L, "org4", false, "woodlands",
> > > > > "4444"));
> > > > >     cache.put(5L, new Organization(5L, "org5", false, "changi",
> > > "5555"));
> > > > >     // cache.put(6L, new Organization(6L, "org6", true, "jurong
> > > island",
> > > > > "6666"));
> > > > >
> > > > >     IgniteCache<Long, BinaryObject> binaryCache =
> > > cache.withKeepBinary();
> > > > >
> > > > >     List<Cache.Entry<Long, BinaryObject>> result;
> > > > >
> > > > >     System.out.println("Scan by address");
> > > > >     ScanQuery<Long, BinaryObject> scanAddress = new ScanQuery<>(
> > > > >         new IgniteBiPredicate<Long, BinaryObject>() {
> > > > >             @Override
> > > > >             public boolean apply(Long aLong, BinaryObject
> > > binaryObject) {
> > > > >                 *// first time filter by jurong, got two entries,
> > org1
> > > > and
> > > > > org3*
> > > > > *                // second time filter by changi, got two entries,
> > org1
> > > > and
> > > > > org3*
> > > > > *                // third time filter by changi as well, uncomment
> > > org6,
> > > > > got three entries, org1, org3 and org6*
> > > > > *                return
> > > > > binaryObject.<String>field("address").startsWith("jurong");*
> > > > >             }
> > > > >         }
> > > > >     );
> > > > >     result = binaryCache.query(scanAddress).getAll();
> > > > >     System.out.println("result: " + result.size());
> > > > >     for (Cache.Entry<Long, BinaryObject> entry : result) {
> > > > >         System.out.println(entry.getValue().deserialize().
> > toString());
> > > > >     }
> > > > >
> > > > >     ignite.close();
> > > > > }
> > > > >
> > > > > Here what I want to do is start a client node, connect to the
> server
> > > node
> > > > > started in step 2. Then I create a cache, put some data inside,
> > > > > then try to run a scan query to find entries by its address.
> > > > > The problem is when I run this program first time, it will return
> two
> > > > > entries, their addresses are started with "jurong", which is
> correct.
> > > > > When I run the program again, with changed value, eg. "changi", it
> > > should
> > > > > return one entry, somehow, it still return two entries with address
> > > > started
> > > > > with "jurong", rather than "changi".
> > > > > When I uncomment the line of "org6", and run the program again, it
> > will
> > > > > return three entries, all of their addresses are started with
> > "jurong".
> > > > >
> > > > > I have no idea what is going on.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Best regards,
> > > > > Andrey V. Mashenkov
> > > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Best regards,
> > > Andrey V. Mashenkov
> > >
> >
>
>
>
> --
> Best regards,
> Andrey V. Mashenkov
>

Mime
  • Unnamed multipart/alternative (inline, None, 0 bytes)
View raw message