httpd-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Ajay Garg <ajaygargn...@gmail.com>
Subject Re: [users@httpd] Problems in setting up a "HTTPS" based WebDAV server
Date Thu, 22 Mar 2012 12:45:00 GMT
Ping .. :-)

(On a serious note, I really need some help).

Thanks and Regards,
Ajay

On Thu, Mar 22, 2012 at 10:14 AM, Ajay Garg <ajaygargnsit@gmail.com> wrote:

> I came across talks wherein it was mentioned that there could be
> mismatches in the "modulus" and "public exponent" of "server.key" and
> "server.crt". I have done the tests (using "openssl" command), but both -
> "modulus" and "public exponent" appear to be the same.
>
> For brevity, I am posting the contents ::
>
> server.key ::
>
>
> ####################################################################################################################
> -----BEGIN RSA PRIVATE KEY-----
> Proc-Type: 4,ENCRYPTED
> DEK-Info: AES-128-CBC,06A5864C289A29E8133ECDC689F27D91
>
> PYvc38+2ReDk6ZrWBIkl6kkfFzob56ZXNMjcB/Iz0yHhKj2NI79h5wli+TLD30PP
> BdsFgF4GTjHuLseD80EulX1JpcfHWgGEL92/flO9eRpxUeu9UgE+BcMyxaa2q3HO
> mHgozrTf+GNRJ+r6ApNDVAGPv2ysf8t78nHvS16m4NuX01Asc6v9+3A5jpLgZ8L/
> /eXbE5OVCOgdU4pULrfRb79N2rcpfk9+dWKfHkAdFNpMLqK0tmyp/pzn/V9PDcQe
> 5L2xxTHnw3A9TZYwW3YG0buKeFLInt1w9ZRyJ81XfmsVtrcaZiwtNH2oEfwLtxVo
> rWDPGeIJbdPNRwCgsT8ysRFC8H6K47UN5EM95Fnn/SW/VuFo7nFtTDP73s9sJiwT
> P//PZbUxW1kAsj0KmWN70zfJIwZoQ2ar79r6aa4BS8buqumSuzVGJGEGzFD6CbuE
> 3YXnyflANuA8zvhS0x44+yqd+x2DQUb80S3tZebAyEakBqeGNQGbWwI2/VgA/mDL
> 5O8niB9wu4CoC6z4PIFlhER5Pwo5MrYVPLzmak8/Ouw2Vo+a9lRrmr6BiSTHReMr
> QZ3FMax+ZH8cWBzfd2/tp0uGu4kh0fik6JzPOY6wvOIvB6Q6nylOY0DiVkmEryt+
> z4BzpxweNd0jd6x68fl3ZfK7a9GYrUr33Dan7Z1VUZm9iuusOgIQ3IxEO74gAvOU
> +RabEs3VbeKCb9c32zAfYWnmZuqBgHRTKc0prSx/LANnjkG8VoMslXY0Uw4965Hd
> JPzQ5FGuKTK+21eLtPelMye2uXFmkzpsPi/8/2Zk91UmasuMoJWK1hlSiztEP3I7
> slbGdk2yJiC6JTCZltoAWVYH4Fr/QQasn36WwBnTTEgABXUsz+UqwIaSZK192L0Z
> yOTuxYNE4loc3cUcUDPT9e8T6L9X6qcvNMkkY4E/HdvGizXB1scb6X9+Xn3s2aTS
> cCO2udxWnBDJ21t7f8yVkRUt93dQ9JlLUEFgjWFkHkippj9N6PXE7aHnXt9LiUKs
> Ooc9iEZFIhxICw51t/NXmq/2seoV1GgwysYdTdXbN0b1C7PVP2Nsy12zpcNbyCPT
> XAqclsCGnBVU1FKA7Rjwua2uiPd05kE85pail6wRrMx0/8NnveVmQpVA1B5lcQb+
> EL2baH9MnDkuMB02UHi/x+s+qBEHKUBQ0x4zK0Fb7sxw9Hr5XejxkAfZj4vOSLem
> STajY7jcGNIcXlTkv4Uj2u065I+jiWzEI9DWZVU+AR0GnEXoTT5RzR+Dj15DjUYt
> UqawF4vXWZh9egaygNxx/PBGnSKjtUEW4mTb13xW/0ZV+WrMntFPG8JqZyZeMDPI
> 9gMW6PCr/KidIfDC8d0NRz1rWrSEVWqZ12UJJny0xvw3dnbvJ/T652iYo743owBl
> 8yIKHFBtLv5muBQ52AYrOrYlD8E55B+25jwoY7z/5Ct9kjxCMPWjRiGDdDJIkg3g
> y/LljDRLp4SFvLPAESJ6gepLPFOTuuAdiI3rQd94pTsGHCGLRamro1HW11bJ4nsk
> vPw+MDFHebycRrEHTryL5+DOrbuwo14KbQGQxbT4JC0lEx/5W7w0KwfOp5p1f3zm
> -----END RSA PRIVATE KEY-----
>
> ####################################################################################################################
>
>
>
>
> server.crt ::
>
>
> ####################################################################################################################
> -----BEGIN CERTIFICATE-----
> MIID3TCCAsWgAwIBAgIBADANBgkqhkiG9w0BAQUFADCBiDELMAkGA1UEBhMCSU4x
> DjAMBgNVBAgMBURlbGhpMQ4wDAYDVQQHDAVEZWxoaTEOMAwGA1UECgwFRGVsaGkx
> DjAMBgNVBAsMBURlbGhpMRIwEAYDVQQDDAkxMjcuMC4wLjExJTAjBgkqhkiG9w0B
> CQEWFmFqYXlnYXJnbnNpdEBnbWFpbC5jb20wHhcNMTIwMzIxMTMyMTUyWhcNMTMw
> MzIxMTMyMTUyWjCBiDELMAkGA1UEBhMCSU4xDjAMBgNVBAgMBURlbGhpMQ4wDAYD
> VQQHDAVEZWxoaTEOMAwGA1UECgwFRGVsaGkxDjAMBgNVBAsMBURlbGhpMRIwEAYD
> VQQDDAkxMjcuMC4wLjExJTAjBgkqhkiG9w0BCQEWFmFqYXlnYXJnbnNpdEBnbWFp
> bC5jb20wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCU8htaaJnsOTPD
> AZQkNE7SHGvQ5RFsTqZOZeaNEV2F6LUqvK8ysmCnKVGE8F9+2we1I/W1bxNsx5f2
> 2ifd2u/pROOPzO0xhlJzWJmJy0xeIcWceMNXUDLXr2ix8+b6LCPbzsyEGbg6IQAE
> AyIMaFv3pA1nYjfEV9ntyF4SEkMgSQdCGfhqQY4ILvWoqbRZwQwKhPxzM6NXmPxW
> kxelx6QUAlAwjqgMaHI+Fa2dk6NNTk9GWB3QYN24Cw+kFGv9f2UkJQlQ0qiC8R+d
> Bh63oNdvZG5YR4QycqCFoPEdwcL2ak5hr8TfVx1sTA/75sswkKUrZYSrAbGgerN2
> KsSWu6utAgMBAAGjUDBOMB0GA1UdDgQWBBQGl2ejA7PJlpC2bwp9gP0NlOwEgDAf
> BgNVHSMEGDAWgBQGl2ejA7PJlpC2bwp9gP0NlOwEgDAMBgNVHRMEBTADAQH/MA0G
> CSqGSIb3DQEBBQUAA4IBAQA93Hkimjlm5g8j7+rZq4sfVhBO7Opx7IoMtkcrmClM
> AECUrzWnQfJoSWQCzW+Gaj9F/CXtQYKt0VnAdGD212CJ6dzhJR1UfTzwSVdzK4gl
> C0Q7YqLZMp7GrpTSOB1rwxNAQwuhcJWiOQP1dRJF8OqSu8ywE5y2hNeCTiXZlLlH
> p+RBxdtG30NJHDDoosx76fUVE4S2Ll3UKKBqXfrQmtF+QnHPEtSHk8cesVFymNU3
> WtQhiAy58RYoU24RX/AcvV/PfFcEpXAVVNndwuZkhV+9uD2NzvkxhcVUx0CDSy/J
> xdsjcda59LByv1K0J46hsWb5AuRbVos6u+O2CpcOj028
> -----END CERTIFICATE-----
>
> ####################################################################################################################
>
>
>
> Regards,
> Ajay
>
>
> On Wed, Mar 21, 2012 at 6:55 PM, Ajay Garg <ajaygargnsit@gmail.com> wrote:
>
>> Well, I looked into "/etc/httpd/logs/error_log", and found that were some
>> errors related to server-name not matching (don't remember the exact
>> statement). But even then the service startup showed "OK", which apparently
>> is a misnomer.
>>
>> Anyways, I regenerated "server.key" and "server.crt" by ::
>>
>>
>> ##################################################################################################################
>> [ajay@ajay ~]$ cd /etc/ssl/certs/
>> [ajay@ajay certs]$ ls
>> localhost.crt  make-dummy-cert  Makefile  server.crt  server.key
>> [ajay@ajay certs]$ pwd
>> /etc/ssl/certs
>> [ajay@ajay certs]$ sudo rm server.key
>> [ajay@ajay certs]$ sudo rm server.crt
>> [ajay@ajay certs]$ sudo make server.key
>> umask 77 ; \
>> /usr/bin/openssl genrsa -aes128 2048 > server.key
>> Generating RSA private key, 2048 bit long modulus
>>
>> ...........................................................................................+++
>> .........................................+++
>> e is 65537 (0x10001)
>> Enter pass phrase:
>> Verifying - Enter pass phrase:
>> [ajay@ajay certs]$ sudo make server.crt
>> umask 77 ; \
>> /usr/bin/openssl req -utf8 -new -key server.key -x509 -days 365 -out
>> server.crt -set_serial 0
>> Enter pass phrase for server.key:
>> You are about to be asked to enter information that will be incorporated
>> into your certificate request.
>> What you are about to enter is what is called a Distinguished Name or a
>> DN.
>> There are quite a few fields but you can leave some blank
>> For some fields there will be a default value,
>> If you enter '.', the field will be left blank.
>> -----
>> Country Name (2 letter code) [XX]:IN
>> State or Province Name (full name) []:Delhi
>> Locality Name (eg, city) [Default City]:Delhi
>> Organization Name (eg, company) [Default Company Ltd]:Delhi
>> Organizational Unit Name (eg, section) []:Delhi
>> Common Name (eg, your name or your server's hostname) []:127.0.0.1
>> Email Address []:ajaygargnsit@gmail.com
>>
>> ##################################################################################################################
>>
>>
>>
>>
>>
>>
>> I then tried to start "httpd" ::
>>
>>
>> ##################################################################################################################
>> [ajay@ajay certs]$ sudo service httpd start
>> Starting httpd: [Wed Mar 21 18:52:00 2012] [warn] module ssl_module is
>> already loaded, skipping
>>
>> Apache/2.2.17 mod_ssl/2.2.17 (Pass Phrase Dialog)
>> Some of your private key files are encrypted for security reasons.
>> In order to read them you have to provide the pass phrases.
>>
>> Server 127.0.0.1:443 (RSA)
>>
>> Enter pass phrase:
>>
>> OK: Pass Phrase Dialog successful.
>>                                                            [FAILED]
>>
>> ##################################################################################################################
>>
>>
>>
>>
>>
>>
>>
>>
>> and "/etc/httpd/logs/error_log" showed ::
>>
>>
>> ##################################################################################################################
>> [Wed Mar 21 18:52:00 2012] [notice] SELinux policy enabled; httpd running
>> as context unconfined_u:system_r:httpd_t:s0
>> [Wed Mar 21 18:52:00 2012] [notice] suEXEC mechanism enabled (wrapper:
>> /usr/sbin/suexec)
>> [Wed Mar 21 18:52:00 2012] [notice] SSL FIPS mode disabled
>> [Wed Mar 21 18:52:02 2012] [warn] RSA server certificate is a CA
>> certificate (BasicConstraints: CA == TRUE !?)
>> [Wed Mar 21 18:52:02 2012] [error] Unable to configure RSA server private
>> key
>> [Wed Mar 21 18:52:02 2012] [error] SSL Library Error: 185073780
>> error:0B080074:x509 certificate routines:X509_check_private_key:key values
>> mismatch
>>
>> ##################################################################################################################
>>
>>
>>
>> Ideas.. ??
>>
>>
>> Thanks and Regards,
>> Ajay
>>
>>
>>
>>
>> On Wed, Mar 21, 2012 at 5:37 PM, Ajay Garg <ajaygargnsit@gmail.com>wrote:
>>
>>> Hi all.
>>>
>>> I am afraid I am a newbie to Apache; and have been trying to setup a
>>> HTTPS based WebDAV server using Apache2 on Fedora 14.
>>>
>>> Prior to this, I could get the HTTP based WebDAV server working, and
>>> accessing the shares via gnome-nautilus worked like a charm :-)
>>> Thus, I will present whatever I have tried to setup the HTTPS variant.
>>>
>>>
>>> 1.
>>> Following are the contents of "/etc/httpd/conf/httpd.conf"
>>>
>>> ##############################
>>>
>>> ###############################################################################################
>>> #
>>> # This is the main Apache server configuration file.  It contains the
>>> # configuration directives that give the server its instructions.
>>> # See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
>>> # In particular, see
>>> # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
>>> # for a discussion of each configuration directive.
>>> #
>>> #
>>> # Do NOT simply read the instructions in here without understanding
>>> # what they do.  They're here only as hints or reminders.  If you are
>>> unsure
>>> # consult the online docs. You have been warned.
>>> #
>>> # The configuration directives are grouped into three basic sections:
>>> #  1. Directives that control the operation of the Apache server process
>>> as a
>>> #     whole (the 'global environment').
>>> #  2. Directives that define the parameters of the 'main' or 'default'
>>> server,
>>> #     which responds to requests that aren't handled by a virtual host.
>>> #     These directives also provide default values for the settings
>>> #     of all virtual hosts.
>>> #  3. Settings for virtual hosts, which allow Web requests to be sent to
>>> #     different IP addresses or hostnames and have them handled by the
>>> #     same Apache server process.
>>> #
>>> # Configuration and logfile names: If the filenames you specify for many
>>> # of the server's control files begin with "/" (or "drive:/" for Win32),
>>> the
>>> # server will use that explicit path.  If the filenames do *not* begin
>>> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
>>> # with ServerRoot set to "/etc/httpd" will be interpreted by the
>>> # server as "/etc/httpd/logs/foo.log".
>>> #
>>>
>>> ### Section 1: Global Environment
>>> #
>>> # The directives in this section affect the overall operation of Apache,
>>> # such as the number of concurrent requests it can handle or where it
>>> # can find its configuration files.
>>> #
>>>
>>> #
>>> # Don't give away too much information about all the subcomponents
>>> # we are running.  Comment out this line if you don't mind remote sites
>>> # finding out what major optional modules you are running
>>> ServerTokens OS
>>>
>>> #
>>> # ServerRoot: The top of the directory tree under which the server's
>>> # configuration, error, and log files are kept.
>>> #
>>> # NOTE!  If you intend to place this on an NFS (or otherwise network)
>>> # mounted filesystem then please read the LockFile documentation
>>> # (available at <URL:
>>> http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
>>> # you will save yourself a lot of trouble.
>>> #
>>> # Do NOT add a slash at the end of the directory path.
>>> #
>>> ServerRoot "/etc/httpd"
>>>
>>> #
>>> # PidFile: The file in which the server should record its process
>>> # identification number when it starts.  Note the PIDFILE variable in
>>> # /etc/sysconfig/httpd must be set appropriately if this location is
>>> # changed.
>>> #
>>> PidFile run/httpd.pid
>>>
>>> #
>>> # Timeout: The number of seconds before receives and sends time out.
>>> #
>>> Timeout 60
>>>
>>> #
>>> # KeepAlive: Whether or not to allow persistent connections (more than
>>> # one request per connection). Set to "Off" to deactivate.
>>> #
>>> KeepAlive Off
>>>
>>> #
>>> # MaxKeepAliveRequests: The maximum number of requests to allow
>>> # during a persistent connection. Set to 0 to allow an unlimited amount.
>>> # We recommend you leave this number high, for maximum performance.
>>> #
>>> MaxKeepAliveRequests 100
>>>
>>> #
>>> # KeepAliveTimeout: Number of seconds to wait for the next request from
>>> the
>>> # same client on the same connection.
>>> #
>>> KeepAliveTimeout 5
>>>
>>> ##
>>> ## Server-Pool Size Regulation (MPM specific)
>>> ##
>>>
>>> # prefork MPM
>>> # StartServers: number of server processes to start
>>> # MinSpareServers: minimum number of server processes which are kept
>>> spare
>>> # MaxSpareServers: maximum number of server processes which are kept
>>> spare
>>> # ServerLimit: maximum value for MaxClients for the lifetime of the
>>> server
>>> # MaxClients: maximum number of server processes allowed to start
>>> # MaxRequestsPerChild: maximum number of requests a server process serves
>>> <IfModule prefork.c>
>>> StartServers       8
>>> MinSpareServers    5
>>> MaxSpareServers   20
>>> ServerLimit      256
>>> MaxClients       256
>>> MaxRequestsPerChild  4000
>>> </IfModule>
>>>
>>> # worker MPM
>>> # StartServers: initial number of server processes to start
>>> # MaxClients: maximum number of simultaneous client connections
>>> # MinSpareThreads: minimum number of worker threads which are kept spare
>>> # MaxSpareThreads: maximum number of worker threads which are kept spare
>>> # ThreadsPerChild: constant number of worker threads in each server
>>> process
>>> # MaxRequestsPerChild: maximum number of requests a server process serves
>>> <IfModule worker.c>
>>> StartServers         4
>>> MaxClients         300
>>> MinSpareThreads     25
>>> MaxSpareThreads     75
>>> ThreadsPerChild     25
>>> MaxRequestsPerChild  0
>>> </IfModule>
>>>
>>> #
>>> # Listen: Allows you to bind Apache to specific IP addresses and/or
>>> # ports, in addition to the default. See also the <VirtualHost>
>>> # directive.
>>> #
>>> # Change this to Listen on specific IP addresses as shown below to
>>> # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
>>> #
>>> #Listen 12.34.56.78:80 <http://12.34.56.78/>
>>> Listen 80
>>>
>>> #
>>> # Dynamic Shared Object (DSO) Support
>>> #
>>> # To be able to use the functionality of a module which was built as a
>>> DSO you
>>> # have to place corresponding `LoadModule' lines at this location so the
>>> # directives contained in it are actually available _before_ they are
>>> used.
>>> # Statically compiled modules (those listed by `httpd -l') do not need
>>> # to be loaded here.
>>> #
>>> # Example:
>>> # LoadModule foo_module modules/mod_foo.so
>>> #
>>> LoadModule auth_basic_module modules/mod_auth_basic.so
>>> LoadModule auth_digest_module modules/mod_auth_digest.so
>>> LoadModule authn_file_module modules/mod_authn_file.so
>>> LoadModule authn_alias_module modules/mod_authn_alias.so
>>> LoadModule authn_anon_module modules/mod_authn_anon.so
>>> LoadModule authn_dbm_module modules/mod_authn_dbm.so
>>> LoadModule authn_default_module modules/mod_authn_default.so
>>> LoadModule authz_host_module modules/mod_authz_host.so
>>> LoadModule authz_user_module modules/mod_authz_user.so
>>> LoadModule authz_owner_module modules/mod_authz_owner.so
>>> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
>>> LoadModule authz_dbm_module modules/mod_authz_dbm.so
>>> LoadModule authz_default_module modules/mod_authz_default.so
>>> LoadModule ldap_module modules/mod_ldap.so
>>> LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
>>> LoadModule include_module modules/mod_include.so
>>> LoadModule log_config_module modules/mod_log_config.so
>>> LoadModule logio_module modules/mod_logio.so
>>> LoadModule env_module modules/mod_env.so
>>> LoadModule ext_filter_module modules/mod_ext_filter.so
>>> LoadModule mime_magic_module modules/mod_mime_magic.so
>>> LoadModule expires_module modules/mod_expires.so
>>> LoadModule deflate_module modules/mod_deflate.so
>>> LoadModule headers_module modules/mod_headers.so
>>> LoadModule usertrack_module modules/mod_usertrack.so
>>> LoadModule setenvif_module modules/mod_setenvif.so
>>> LoadModule mime_module modules/mod_mime.so
>>> LoadModule dav_module modules/mod_dav.so
>>> LoadModule status_module modules/mod_status.so
>>> LoadModule autoindex_module modules/mod_autoindex.so
>>> LoadModule info_module modules/mod_info.so
>>> LoadModule dav_fs_module modules/mod_dav_fs.so
>>> LoadModule vhost_alias_module modules/mod_vhost_alias.so
>>> LoadModule negotiation_module modules/mod_negotiation.so
>>> LoadModule dir_module modules/mod_dir.so
>>> LoadModule actions_module modules/mod_actions.so
>>> LoadModule speling_module modules/mod_speling.so
>>> LoadModule userdir_module modules/mod_userdir.so
>>> LoadModule alias_module modules/mod_alias.so
>>> LoadModule substitute_module modules/mod_substitute.so
>>> LoadModule rewrite_module modules/mod_rewrite.so
>>> LoadModule proxy_module modules/mod_proxy.so
>>> LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
>>> LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
>>> LoadModule proxy_http_module modules/mod_proxy_http.so
>>> LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
>>> LoadModule proxy_connect_module modules/mod_proxy_connect.so
>>> LoadModule cache_module modules/mod_cache.so
>>> LoadModule suexec_module modules/mod_suexec.so
>>> LoadModule disk_cache_module modules/mod_disk_cache.so
>>> LoadModule cgi_module modules/mod_cgi.so
>>> LoadModule version_module modules/mod_version.so
>>> LoadModule ssl_module modules/mod_ssl.so
>>>
>>> #
>>> # The following modules are not loaded by default:
>>> #
>>> #LoadModule asis_module modules/mod_asis.so
>>> #LoadModule authn_dbd_module modules/mod_authn_dbd.so
>>> #LoadModule cern_meta_module modules/mod_cern_meta.so
>>> #LoadModule cgid_module modules/mod_cgid.so
>>> #LoadModule dbd_module modules/mod_dbd.so
>>> #LoadModule dumpio_module modules/mod_dumpio.so
>>> #LoadModule filter_module modules/mod_filter.so
>>> #LoadModule ident_module modules/mod_ident.so
>>> #LoadModule log_forensic_module modules/mod_log_forensic.so
>>> #LoadModule unique_id_module modules/mod_unique_id.so
>>> #
>>>
>>> #
>>> # Load config files from the config directory "/etc/httpd/conf.d".
>>> #
>>> Include conf.d/*.conf
>>>
>>> #
>>> # ExtendedStatus controls whether Apache will generate "full" status
>>> # information (ExtendedStatus On) or just basic information
>>> (ExtendedStatus
>>> # Off) when the "server-status" handler is called. The default is Off.
>>> #
>>> #ExtendedStatus On
>>>
>>> #
>>> # If you wish httpd to run as a different user or group, you must run
>>> # httpd as root initially and it will switch.
>>> #
>>> # User/Group: The name (or #number) of the user/group to run httpd as.
>>> #  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
>>> #  . On HPUX you may not be able to use shared memory as nobody, and the
>>> #    suggested workaround is to create a user www and use that user.
>>> #  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
>>> #  when the value of (unsigned)Group is above 60000;
>>> #  don't use Group #-1 on these systems!
>>> #
>>> User apache
>>> Group apache
>>>
>>> ### Section 2: 'Main' server configuration
>>> #
>>> # The directives in this section set up the values used by the 'main'
>>> # server, which responds to any requests that aren't handled by a
>>> # <VirtualHost> definition.  These values also provide defaults for
>>> # any <VirtualHost> containers you may define later in the file.
>>> #
>>> # All of these directives may appear inside <VirtualHost> containers,
>>> # in which case these default settings will be overridden for the
>>> # virtual host being defined.
>>> #
>>>
>>> #
>>> # ServerAdmin: Your address, where problems with the server should be
>>> # e-mailed.  This address appears on some server-generated pages, such
>>> # as error documents.  e.g. admin@your-domain.com
>>> #
>>> ServerAdmin root@localhost
>>>
>>> #
>>> # ServerName gives the name and port that the server uses to identify
>>> itself.
>>> # This can often be determined automatically, but we recommend you
>>> specify
>>> # it explicitly to prevent problems during startup.
>>> #
>>> # If this is not set to valid DNS name for your host, server-generated
>>> # redirections will not work.  See also the UseCanonicalName directive.
>>> #
>>> # If your host doesn't have a registered DNS name, enter its IP address
>>> here.
>>> # You will have to access it by its address anyway, and this will make
>>> # redirections work in a sensible way.
>>> #
>>> #ServerName www.example.com:80 <http://www.example.com/>
>>>
>>> #
>>> # UseCanonicalName: Determines how Apache constructs self-referencing
>>> # URLs and the SERVER_NAME and SERVER_PORT variables.
>>> # When set "Off", Apache will use the Hostname and Port supplied
>>> # by the client.  When set "On", Apache will use the value of the
>>> # ServerName directive.
>>> #
>>> UseCanonicalName Off
>>>
>>> #
>>> # DocumentRoot: The directory out of which you will serve your
>>> # documents. By default, all requests are taken from this directory, but
>>> # symbolic links and aliases may be used to point to other locations.
>>> #
>>> DocumentRoot "/var/www/html"
>>>
>>> #
>>> # Each directory to which Apache has access can be configured with
>>> respect
>>> # to which services and features are allowed and/or disabled in that
>>> # directory (and its subdirectories).
>>> #
>>> # First, we configure the "default" to be a very restrictive set of
>>> # features.
>>> #
>>> <Directory />
>>>     Options FollowSymLinks
>>>     AllowOverride None
>>> </Directory>
>>>
>>> #
>>> # Note that from this point forward you must specifically allow
>>> # particular features to be enabled - so if something's not working as
>>> # you might expect, make sure that you have specifically enabled it
>>> # below.
>>> #
>>>
>>> #
>>> # This should be changed to whatever you set DocumentRoot to.
>>> #
>>> <Directory "/var/www/html">
>>>
>>> #
>>> # Possible values for the Options directive are "None", "All",
>>> # or any combination of:
>>> #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
>>> MultiViews
>>> #
>>> # Note that "MultiViews" must be named *explicitly* --- "Options All"
>>> # doesn't give it to you.
>>> #
>>> # The Options directive is both complicated and important.  Please see
>>> # http://httpd.apache.org/docs/2.2/mod/core.html#options
>>> # for more information.
>>> #
>>>     Options Indexes FollowSymLinks
>>>
>>> #
>>> # AllowOverride controls what directives may be placed in .htaccess
>>> files.
>>> # It can be "All", "None", or any combination of the keywords:
>>> #   Options FileInfo AuthConfig Limit
>>> #
>>>     AllowOverride None
>>>
>>> #
>>> # Controls who can get stuff from this server.
>>> #
>>>     Order allow,deny
>>>     Allow from all
>>>
>>> </Directory>
>>>
>>> #
>>> # UserDir: The name of the directory that is appended onto a user's home
>>> # directory if a ~user request is received.
>>> #
>>> # The path to the end user account 'public_html' directory must be
>>> # accessible to the webserver userid.  This usually means that ~userid
>>> # must have permissions of 711, ~userid/public_html must have permissions
>>> # of 755, and documents contained therein must be world-readable.
>>> # Otherwise, the client will only receive a "403 Forbidden" message.
>>> #
>>> # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
>>> #
>>> <IfModule mod_userdir.c>
>>>     #
>>>     # UserDir is disabled by default since it can confirm the presence
>>>     # of a username on the system (depending on home directory
>>>     # permissions).
>>>     #
>>>     UserDir disabled
>>>
>>>     #
>>>     # To enable requests to /~user/ to serve the user's public_html
>>>     # directory, remove the "UserDir disabled" line above, and uncomment
>>>     # the following line instead:
>>>     #
>>>     #UserDir public_html
>>>
>>> </IfModule>
>>>
>>> #
>>> # Control access to UserDir directories.  The following is an example
>>> # for a site where these directories are restricted to read-only.
>>> #
>>> #<Directory /home/*/public_html>
>>> #    AllowOverride FileInfo AuthConfig Limit
>>> #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
>>> #    <Limit GET POST OPTIONS>
>>> #        Order allow,deny
>>> #        Allow from all
>>> #    </Limit>
>>> #    <LimitExcept GET POST OPTIONS>
>>> #        Order deny,allow
>>> #        Deny from all
>>> #    </LimitExcept>
>>> #</Directory>
>>>
>>> #
>>> # DirectoryIndex: sets the file that Apache will serve if a directory
>>> # is requested.
>>> #
>>> # The index.html.var file (a type-map) is used to deliver content-
>>> # negotiated documents.  The MultiViews Option can be used for the
>>> # same purpose, but it is much slower.
>>> #
>>> DirectoryIndex index.html index.html.var
>>>
>>> #
>>> # AccessFileName: The name of the file to look for in each directory
>>> # for additional configuration directives.  See also the AllowOverride
>>> # directive.
>>> #
>>> AccessFileName .htaccess
>>>
>>> #
>>> # The following lines prevent .htaccess and .htpasswd files from being
>>> # viewed by Web clients.
>>> #
>>> <Files ~ "^\.ht">
>>>     Order allow,deny
>>>     Deny from all
>>>     Satisfy All
>>> </Files>
>>>
>>> #
>>> # TypesConfig describes where the mime.types file (or equivalent) is
>>> # to be found.
>>> #
>>> TypesConfig /etc/mime.types
>>>
>>> #
>>> # DefaultType is the default MIME type the server will use for a document
>>> # if it cannot otherwise determine one, such as from filename extensions.
>>> # If your server contains mostly text or HTML documents, "text/plain" is
>>> # a good value.  If most of your content is binary, such as applications
>>> # or images, you may want to use "application/octet-stream" instead to
>>> # keep browsers from trying to display binary files as though they are
>>> # text.
>>> #
>>> DefaultType text/plain
>>>
>>> #
>>> # The mod_mime_magic module allows the server to use various hints from
>>> the
>>> # contents of the file itself to determine its type.  The MIMEMagicFile
>>> # directive tells the module where the hint definitions are located.
>>> #
>>> <IfModule mod_mime_magic.c>
>>> #   MIMEMagicFile /usr/share/magic.mime
>>>     MIMEMagicFile conf/magic
>>> </IfModule>
>>>
>>> #
>>> # HostnameLookups: Log the names of clients or just their IP addresses
>>> # e.g., www.apache.org (on) or 204.62.129.132 (off).
>>> # The default is off because it'd be overall better for the net if people
>>> # had to knowingly turn this feature on, since enabling it means that
>>> # each client request will result in AT LEAST one lookup request to the
>>> # nameserver.
>>> #
>>> HostnameLookups Off
>>>
>>> #
>>> # EnableMMAP: Control whether memory-mapping is used to deliver
>>> # files (assuming that the underlying OS supports it).
>>> # The default is on; turn this off if you serve from NFS-mounted
>>> # filesystems.  On some systems, turning it off (regardless of
>>> # filesystem) can improve performance; for details, please see
>>> # http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
>>> #
>>> #EnableMMAP off
>>>
>>> #
>>> # EnableSendfile: Control whether the sendfile kernel support is
>>> # used to deliver files (assuming that the OS supports it).
>>> # The default is on; turn this off if you serve from NFS-mounted
>>> # filesystems.  Please see
>>> # http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
>>> #
>>> #EnableSendfile off
>>>
>>> #
>>> # ErrorLog: The location of the error log file.
>>> # If you do not specify an ErrorLog directive within a <VirtualHost>
>>> # container, error messages relating to that virtual host will be
>>> # logged here.  If you *do* define an error logfile for a <VirtualHost>
>>> # container, that host's errors will be logged there and not here.
>>> #
>>> ErrorLog logs/error_log
>>>
>>> #
>>> # LogLevel: Control the number of messages logged to the error_log.
>>> # Possible values include: debug, info, notice, warn, error, crit,
>>> # alert, emerg.
>>> #
>>> LogLevel warn
>>>
>>> #
>>> # The following directives define some format nicknames for use with
>>> # a CustomLog directive (see below).
>>> #
>>> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
>>> combined
>>> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>>> LogFormat "%{Referer}i -> %U" referer
>>> LogFormat "%{User-agent}i" agent
>>>
>>> # "combinedio" includes actual counts of actual bytes received (%I) and
>>> sent (%O); this
>>> # requires the mod_logio module to be loaded.
>>> #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"
>>> %I %O" combinedio
>>>
>>> #
>>> # The location and format of the access logfile (Common Logfile Format).
>>> # If you do not define any access logfiles within a <VirtualHost>
>>> # container, they will be logged here.  Contrariwise, if you *do*
>>> # define per-<VirtualHost> access logfiles, transactions will be
>>> # logged therein and *not* in this file.
>>> #
>>> #CustomLog logs/access_log common
>>>
>>> #
>>> # If you would like to have separate agent and referer logfiles,
>>> uncomment
>>> # the following directives.
>>> #
>>> #CustomLog logs/referer_log referer
>>> #CustomLog logs/agent_log agent
>>>
>>> #
>>> # For a single logfile with access, agent, and referer information
>>> # (Combined Logfile Format), use the following directive:
>>> #
>>> CustomLog logs/access_log combined
>>>
>>> #
>>> # Optionally add a line containing the server version and virtual host
>>> # name to server-generated pages (internal error documents, FTP directory
>>> # listings, mod_status and mod_info output etc., but not CGI generated
>>> # documents or custom error documents).
>>> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
>>> # Set to one of:  On | Off | EMail
>>> #
>>> ServerSignature On
>>>
>>> #
>>> # Aliases: Add here as many aliases as you need (with no limit). The
>>> format is
>>> # Alias fakename realname
>>> #
>>> # Note that if you include a trailing / on fakename then the server will
>>> # require it to be present in the URL.  So "/icons" isn't aliased in this
>>> # example, only "/icons/".  If the fakename is slash-terminated, then
>>> the
>>> # realname must also be slash terminated, and if the fakename omits the
>>> # trailing slash, the realname must also omit it.
>>> #
>>> # We include the /icons/ alias for FancyIndexed directory listings.  If
>>> you
>>> # do not use FancyIndexing, you may comment this out.
>>> #
>>> Alias /icons/ "/var/www/icons/"
>>>
>>> <Directory "/var/www/icons">
>>>     Options Indexes MultiViews FollowSymLinks
>>>     AllowOverride None
>>>     Order allow,deny
>>>     Allow from all
>>> </Directory>
>>>
>>> #
>>> # WebDAV module configuration section.
>>> #
>>> <IfModule mod_dav_fs.c>
>>>     # Location of the WebDAV lock database.
>>>     DAVLockDB /var/lib/dav/lockdb
>>> </IfModule>
>>>
>>> #
>>> # ScriptAlias: This controls which directories contain server scripts.
>>> # ScriptAliases are essentially the same as Aliases, except that
>>> # documents in the realname directory are treated as applications and
>>> # run by the server when requested rather than as documents sent to the
>>> client.
>>> # The same rules about trailing "/" apply to ScriptAlias directives as to
>>> # Alias.
>>> #
>>> ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
>>>
>>> #
>>> # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
>>> # CGI directory exists, if you have that configured.
>>> #
>>> <Directory "/var/www/cgi-bin">
>>>     AllowOverride None
>>>     Options None
>>>     Order allow,deny
>>>     Allow from all
>>> </Directory>
>>>
>>> #
>>> # Redirect allows you to tell clients about documents which used to
>>> exist in
>>> # your server's namespace, but do not anymore. This allows you to tell
>>> the
>>> # clients where to look for the relocated document.
>>> # Example:
>>> # Redirect permanent /foo http://www.example.com/bar
>>>
>>> #
>>> # Directives controlling the display of server-generated directory
>>> listings.
>>> #
>>>
>>> #
>>> # IndexOptions: Controls the appearance of server-generated directory
>>> # listings.
>>> #
>>> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable
>>> Charset=UTF-8
>>>
>>> #
>>> # AddIcon* directives tell the server which icon to show for different
>>> # files or filename extensions.  These are only displayed for
>>> # FancyIndexed directories.
>>> #
>>> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>>>
>>> AddIconByType (TXT,/icons/text.gif) text/*
>>> AddIconByType (IMG,/icons/image2.gif) image/*
>>> AddIconByType (SND,/icons/sound2.gif) audio/*
>>> AddIconByType (VID,/icons/movie.gif) video/*
>>>
>>> AddIcon /icons/binary.gif .bin .exe
>>> AddIcon /icons/binhex.gif .hqx
>>> AddIcon /icons/tar.gif .tar
>>> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
>>> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
>>> AddIcon /icons/a.gif .ps .ai .eps
>>> AddIcon /icons/layout.gif .html .shtml .htm .pdf
>>> AddIcon /icons/text.gif .txt
>>> AddIcon /icons/c.gif .c
>>> AddIcon /icons/p.gif .pl .py
>>> AddIcon /icons/f.gif .for
>>> AddIcon /icons/dvi.gif .dvi
>>> AddIcon /icons/uuencoded.gif .uu
>>> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
>>> AddIcon /icons/tex.gif .tex
>>> AddIcon /icons/bomb.gif core
>>>
>>> AddIcon /icons/back.gif ..
>>> AddIcon /icons/hand.right.gif README
>>> AddIcon /icons/folder.gif ^^DIRECTORY^^
>>> AddIcon /icons/blank.gif ^^BLANKICON^^
>>>
>>> #
>>> # DefaultIcon is which icon to show for files which do not have an icon
>>> # explicitly set.
>>> #
>>> DefaultIcon /icons/unknown.gif
>>>
>>> #
>>> # AddDescription allows you to place a short description after a file in
>>> # server-generated indexes.  These are only displayed for FancyIndexed
>>> # directories.
>>> # Format: AddDescription "description" filename
>>> #
>>> #AddDescription "GZIP compressed document" .gz
>>> #AddDescription "tar archive" .tar
>>> #AddDescription "GZIP compressed tar archive" .tgz
>>>
>>> #
>>> # ReadmeName is the name of the README file the server will look for by
>>> # default, and append to directory listings.
>>> #
>>> # HeaderName is the name of a file which should be prepended to
>>> # directory indexes.
>>> ReadmeName README.html
>>> HeaderName HEADER.html
>>>
>>> #
>>> # IndexIgnore is a set of filenames which directory indexing should
>>> ignore
>>> # and not include in the listing.  Shell-style wildcarding is permitted.
>>> #
>>> IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
>>>
>>> #
>>> # DefaultLanguage and AddLanguage allows you to specify the language of
>>> # a document. You can then use content negotiation to give a browser a
>>> # file in a language the user can understand.
>>> #
>>> # Specify a default language. This means that all data
>>> # going out without a specific language tag (see below) will
>>> # be marked with this one. You probably do NOT want to set
>>> # this unless you are sure it is correct for all cases.
>>> #
>>> # * It is generally better to not mark a page as
>>> # * being a certain language than marking it with the wrong
>>> # * language!
>>> #
>>> # DefaultLanguage nl
>>> #
>>> # Note 1: The suffix does not have to be the same as the language
>>> # keyword --- those with documents in Polish (whose net-standard
>>> # language code is pl) may wish to use "AddLanguage pl .po" to
>>> # avoid the ambiguity with the common suffix for perl scripts.
>>> #
>>> # Note 2: The example entries below illustrate that in some cases
>>> # the two character 'Language' abbreviation is not identical to
>>> # the two character 'Country' code for its country,
>>> # E.g. 'Danmark/dk' versus 'Danish/da'.
>>> #
>>> # Note 3: In the case of 'ltz' we violate the RFC by using a three char
>>> # specifier. There is 'work in progress' to fix this and get
>>> # the reference data for rfc1766 cleaned up.
>>> #
>>> # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
>>> # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German
>>> (de)
>>> # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
>>> # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
>>> # Norwegian (no) - Polish (pl) - Portugese (pt)
>>> # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
>>> # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
>>> #
>>> AddLanguage ca .ca
>>> AddLanguage cs .cz .cs
>>> AddLanguage da .dk
>>> AddLanguage de .de
>>> AddLanguage el .el
>>> AddLanguage en .en
>>> AddLanguage eo .eo
>>> AddLanguage es .es
>>> AddLanguage et .et
>>> AddLanguage fr .fr
>>> AddLanguage he .he
>>> AddLanguage hr .hr
>>> AddLanguage it .it
>>> AddLanguage ja .ja
>>> AddLanguage ko .ko
>>> AddLanguage ltz .ltz
>>> AddLanguage nl .nl
>>> AddLanguage nn .nn
>>> AddLanguage no .no
>>> AddLanguage pl .po
>>> AddLanguage pt .pt
>>> AddLanguage pt-BR .pt-br
>>> AddLanguage ru .ru
>>> AddLanguage sv .sv
>>> AddLanguage zh-CN .zh-cn
>>> AddLanguage zh-TW .zh-tw
>>>
>>> #
>>> # LanguagePriority allows you to give precedence to some languages
>>> # in case of a tie during content negotiation.
>>> #
>>> # Just list the languages in decreasing order of preference. We have
>>> # more or less alphabetized them here. You probably want to change this.
>>> #
>>> LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn
>>> no pl pt pt-BR ru sv zh-CN zh-TW
>>>
>>> #
>>> # ForceLanguagePriority allows you to serve a result page rather than
>>> # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE
>>> (Fallback)
>>> # [in case no accepted languages matched the available variants]
>>> #
>>> ForceLanguagePriority Prefer Fallback
>>>
>>> #
>>> # Specify a default charset for all content served; this enables
>>> # interpretation of all content as UTF-8 by default.  To use the
>>> # default browser choice (ISO-8859-1), or to allow the META tags
>>> # in HTML content to override this choice, comment out this
>>> # directive:
>>> #
>>> AddDefaultCharset UTF-8
>>>
>>> #
>>> # AddType allows you to add to or override the MIME configuration
>>> # file mime.types for specific file types.
>>> #
>>> #AddType application/x-tar .tgz
>>>
>>> #
>>> # AddEncoding allows you to have certain browsers uncompress
>>> # information on the fly. Note: Not all browsers support this.
>>> # Despite the name similarity, the following Add* directives have nothing
>>> # to do with the FancyIndexing customization directives above.
>>> #
>>> #AddEncoding x-compress .Z
>>> #AddEncoding x-gzip .gz .tgz
>>>
>>> # If the AddEncoding directives above are commented-out, then you
>>> # probably should define those extensions to indicate media types:
>>> #
>>> AddType application/x-compress .Z
>>> AddType application/x-gzip .gz .tgz
>>>
>>> #
>>> #   MIME-types for downloading Certificates and CRLs
>>> #
>>> AddType application/x-x509-ca-cert .crt
>>> AddType application/x-pkcs7-crl    .crl
>>>
>>> #
>>> # AddHandler allows you to map certain file extensions to "handlers":
>>> # actions unrelated to filetype. These can be either built into the
>>> server
>>> # or added with the Action directive (see below)
>>> #
>>> # To use CGI scripts outside of ScriptAliased directories:
>>> # (You will also need to add "ExecCGI" to the "Options" directive.)
>>> #
>>> #AddHandler cgi-script .cgi
>>>
>>> #
>>> # For files that include their own HTTP headers:
>>> #
>>> #AddHandler send-as-is asis
>>>
>>> #
>>> # For type maps (negotiated resources):
>>> # (This is enabled by default to allow the Apache "It Worked" page
>>> #  to be distributed in multiple languages.)
>>> #
>>> AddHandler type-map var
>>>
>>> #
>>> # Filters allow you to process content before it is sent to the client.
>>> #
>>> # To parse .shtml files for server-side includes (SSI):
>>> # (You will also need to add "Includes" to the "Options" directive.)
>>> #
>>> AddType text/html .shtml
>>> AddOutputFilter INCLUDES .shtml
>>>
>>> #
>>> # Action lets you define media types that will execute a script whenever
>>> # a matching file is called. This eliminates the need for repeated URL
>>> # pathnames for oft-used CGI file processors.
>>> # Format: Action media/type /cgi-script/location
>>> # Format: Action handler-name /cgi-script/location
>>> #
>>>
>>> #
>>> # Customizable error responses come in three flavors:
>>> # 1) plain text 2) local redirects 3) external redirects
>>> #
>>> # Some examples:
>>> #ErrorDocument 500 "The server made a boo boo."
>>> #ErrorDocument 404 /missing.html
>>> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
>>> #ErrorDocument 402 http://www.example.com/subscription_info.html
>>> #
>>>
>>> #
>>> # Putting this all together, we can internationalize error responses.
>>> #
>>> # We use Alias to redirect any /error/HTTP_<error>.html.var response to
>>> # our collection of by-error message multi-language collections.  We use
>>> # includes to substitute the appropriate text.
>>> #
>>> # You can modify the messages' appearance without changing any of the
>>> # default HTTP_<error>.html.var files by adding the line:
>>> #
>>> #   Alias /error/include/ "/your/include/path/"
>>> #
>>> # which allows you to create your own set of files by starting with the
>>> # /var/www/error/include/ files and
>>> # copying them to /your/include/path/, even on a per-VirtualHost basis.
>>> #
>>>
>>> Alias /error/ "/var/www/error/"
>>>
>>> <IfModule mod_negotiation.c>
>>> <IfModule mod_include.c>
>>>     <Directory "/var/www/error">
>>>         AllowOverride None
>>>         Options IncludesNoExec
>>>         AddOutputFilter Includes html
>>>         AddHandler type-map var
>>>         Order allow,deny
>>>         Allow from all
>>>         LanguagePriority en es de fr
>>>         ForceLanguagePriority Prefer Fallback
>>>     </Directory>
>>>
>>> #    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
>>> #    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
>>> #    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
>>> #    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
>>> #    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
>>> #    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
>>> #    ErrorDocument 410 /error/HTTP_GONE.html.var
>>> #    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
>>> #    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
>>> #    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
>>> #    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
>>> #    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
>>> #    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
>>> #    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
>>> #    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
>>> #    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
>>> #    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
>>>
>>> </IfModule>
>>> </IfModule>
>>>
>>> #
>>> # The following directives modify normal HTTP response behavior to
>>> # handle known problems with browser implementations.
>>> #
>>> BrowserMatch "Mozilla/2" nokeepalive
>>> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
>>> BrowserMatch "RealPlayer 4\.0" force-response-1.0
>>> BrowserMatch "Java/1\.0" force-response-1.0
>>> BrowserMatch "JDK/1\.0" force-response-1.0
>>>
>>> #
>>> # The following directive disables redirects on non-GET requests for
>>> # a directory that does not include the trailing slash.  This fixes a
>>> # problem with Microsoft WebFolders which does not appropriately handle
>>> # redirects for folders with DAV methods.
>>> # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
>>> #
>>> BrowserMatch "Microsoft Data Access Internet Publishing Provider"
>>> redirect-carefully
>>> BrowserMatch "MS FrontPage" redirect-carefully
>>> BrowserMatch "^WebDrive" redirect-carefully
>>> BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
>>> BrowserMatch "^gnome-vfs/1.0" redirect-carefully
>>> BrowserMatch "^XML Spy" redirect-carefully
>>> BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
>>>
>>> #
>>> # Allow server status reports generated by mod_status,
>>> # with the URL of http://servername/server-status
>>> # Change the ".example.com" to match your domain to enable.
>>> #
>>> #<Location /server-status>
>>> #    SetHandler server-status
>>> #    Order deny,allow
>>> #    Deny from all
>>> #    Allow from .example.com
>>> #</Location>
>>>
>>> #
>>> # Allow remote server configuration reports, with the URL of
>>> #  http://servername/server-info (requires that mod_info.c be loaded).
>>> # Change the ".example.com" to match your domain to enable.
>>> #
>>> #<Location /server-info>
>>> #    SetHandler server-info
>>> #    Order deny,allow
>>> #    Deny from all
>>> #    Allow from .example.com
>>> #</Location>
>>>
>>> #
>>> # Proxy Server directives. Uncomment the following lines to
>>> # enable the proxy server:
>>> #
>>> #<IfModule mod_proxy.c>
>>> #ProxyRequests On
>>> #
>>> #<Proxy *>
>>> #    Order deny,allow
>>> #    Deny from all
>>> #    Allow from .example.com
>>> #</Proxy>
>>>
>>> #
>>> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
>>> # ("Full" adds the server version; "Block" removes all outgoing Via:
>>> headers)
>>> # Set to one of: Off | On | Full | Block
>>> #
>>> #ProxyVia On
>>>
>>> #
>>> # To enable a cache of proxied content, uncomment the following lines.
>>> # See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more
>>> details.
>>> #
>>> #<IfModule mod_disk_cache.c>
>>> #   CacheEnable disk /
>>> #   CacheRoot "/var/cache/mod_proxy"
>>> #</IfModule>
>>> #
>>>
>>> #</IfModule>
>>> # End of proxy directives.
>>>
>>> ### Section 3: Virtual Hosts
>>> #
>>> # VirtualHost: If you want to maintain multiple domains/hostnames on your
>>> # machine you can setup VirtualHost containers for them. Most
>>> configurations
>>> # use only name-based virtual hosts so the server doesn't need to worry
>>> about
>>> # IP addresses. This is indicated by the asterisks in the directives
>>> below.
>>> #
>>> # Please see the documentation at
>>> # <URL:http://httpd.apache.org/docs/2.2/vhosts/>
>>> # for further details before you try to setup virtual hosts.
>>> #
>>> # You may use the command line option '-S' to verify your virtual host
>>> # configuration.
>>>
>>> #
>>> # Use name-based virtual hosting.
>>> #
>>> #NameVirtualHost *:80
>>> #
>>> # NOTE: NameVirtualHost cannot be used without a port specifier
>>> # (e.g. :80) if mod_ssl is being used, due to the nature of the
>>> # SSL protocol.
>>> #
>>>
>>> #
>>> # VirtualHost example:
>>> # Almost any Apache directive may go into a VirtualHost container.
>>> # The first VirtualHost section is used for requests without a known
>>> # server name.
>>> #
>>> #<VirtualHost *:80>
>>> #    ServerAdmin webmaster@dummy-host.example.com
>>> #    DocumentRoot /www/docs/dummy-host.example.com
>>> #    ServerName dummy-host.example.com
>>> #    ErrorLog logs/dummy-host.example.com-error_log
>>> #    CustomLog logs/dummy-host.example.com-access_log common
>>> #</VirtualHost>
>>>
>>> NameVirtualHost *:443
>>> <VirtualHost *:443>
>>>         SSLEngine on
>>>         SSLCipherSuite
>>> ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
>>>
>>>         SSLCertificateFile      /etc/ssl/certs/server.crt
>>>         SSLCertificateKeyFile   /etc/ssl/certs/server.key
>>>
>>>         DocumentRoot /var/www/web1/web/
>>>         <Directory /var/www/web1/web/>
>>>                 Options Indexes MultiViews
>>>                 AllowOverride None
>>>                 Order allow,deny
>>>                 allow from all
>>>         </Directory>
>>>
>>>         Alias /webdav /var/www/web1/web
>>>
>>>         <Location /webdav>
>>>            DAV On
>>>            AuthType Basic
>>>            AuthName "webdav"
>>>            AuthUserFile /var/www/web1/passwd.dav
>>>            Require valid-user
>>>        </Location>
>>>
>>> </VirtualHost>
>>>
>>> ##########################################################################################################################
>>>
>>>
>>>
>>>
>>>
>>>
>>> 2.
>>> Following is the startup info when I do "sudo service httpd start" ::
>>>
>>>
>>> ##########################################################################################################################
>>> [ajay@ajay ~]$ sudo service httpd start
>>> Starting httpd: [Wed Mar 21 11:20:59 2012] [warn] module ssl_module is
>>> already loaded, skipping
>>> httpd: Could not reliably determine the server's fully qualified domain
>>> name, using ::1 for ServerName
>>> Apache/2.2.17 mod_ssl/2.2.17 (Pass Phrase Dialog)
>>> Some of your private key files are encrypted for security reasons.
>>> In order to read them you have to provide the pass phrases.
>>>
>>> Server ::1:443 (RSA)
>>> Enter pass phrase:
>>>
>>> OK: Pass Phrase Dialog successful.
>>>                                                            [  OK  ]
>>>
>>> ##########################################################################################################################
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> 3.
>>> Following are the parameters I enter in gnome-nautilus ::
>>>
>>>
>>> ###########################################################################################################################
>>> Service type:                       Secure WebDAV (HTTPS)
>>> Server:                                localhost
>>>
>>> Optional information:
>>> Port:                                    443
>>> Folder:                                 webdav
>>> User Name:
>>>
>>> Add bookmark
>>> Bookmark name:
>>>
>>> ###########################################################################################################################
>>>
>>>
>>>
>>> 4.
>>> Finally, upon clikcing "Connect", I get the popup with the following
>>> message ::
>>>
>>>
>>> ###########################################################################################################################
>>> Cannot display location "davs://
>>> localhost/webdav"
>>>
>>> HTTP Error: Cannot connect to destination (localhost)
>>>
>>> ###########################################################################################################################
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> I will be obliged for any pointers. I have been going nuts for three
>>> days :|
>>>
>>> Looking forward to a reply.
>>>
>>>
>>> Regards,
>>> Ajay
>>>
>>
>>
>

Mime
View raw message