httpd-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Ch Praveena" <ps050...@gmail.com>
Subject Re: [users@httpd] Apache installation
Date Fri, 04 Apr 2008 07:49:34 GMT
Hi,

    I could run apache server(httpd2.2.8), when configured as default. But,
The browser is giving  message "It works!", but not the home page.. Please
let me know the reason.




2008/4/4 Ch Praveena <ps050202@gmail.com>:

> Hi all,
>
> I am getting a message like "[Fri Apr 04 12:11:15 2008] [error] [client
> 10.20.220.15] File does not exist: /usr/local/apache2/htdocs/favicon.ico"
> in the error_log file of the source, while starting the httpd 2..2.8 server.
> Let me know the reason of getting this type of error.
>
>
>
> 2008/4/3 Ch Praveena <ps050202@gmail.com>:
>
> Hi,
> >
> > It was again failed and I was getting this 403 forbidden error.
> >
> > Let me describe you what I have done..
> > I have deleted both the server source files and started afresh from the
> > extraction..
> > followed the steps like:
> > [root@praveena httpd-2.0.63]# pwd
> > /home/praveena/software/httpd-2.0.63
> > [root@praveena httpd-2.0.63]# ./configure
> > --prefix=/home/praveena/software/src2/
> > [root@praveena httpd-2.0.63]# make
> > [root@praveena httpd-2.0.63]# make install
> >
> > Finally,
> > [root@praveena /]# /home/praveena/software/src2/bin/apachectl start
> >
> > But I found 403 forbidden error..
> >
> >
> >
> >
> >
> > On 03/04/2008, Narendra Verma <narendra.verma@impetus.co.in> wrote:
> > >
> > >  Hi just change one more entry
> > >
> > > 1.             /export/home/infra/install/*httpd-2.0.63*
> > > /conf/httpd.conf
> > >
> > >              search for 'Listen'  and 'ServerName'  use like
> > >
> > >               Listen 1100
> > >
> > >               ServerName 192.168.99.29:1100
> > >
> > >             2.            /export/home/infra/install/* httpd-2.2.8*
> > > /conf/httpd.conf
> > >
> > >               Listen 1200
> > >
> > >               ServerName 192.168.99.29:1200
> > >
> > > Note : use IP of your machine.
> > >
> > > Narendra
> > >
> > >
> > >
> > > -----Original Message-----
> > > *From:* Ch Praveena [mailto:ps050202@gmail.com]
> > > *Sent:* Thursday, April 03, 2008 2:56 PM
> > >
> > > *To:* users@httpd.apache.org
> > > *Subject:* Re: [users@httpd] Apache installation
> > >
> > >
> > >
> > > Hi,
> > > Thats great.. But, I am getting an error like
> > > http://rifers.org/paste/show/7034 when I ve started the httpd 2.2.8
> > > even after loading at a different location like ./configure
> > > --prefix=/home/praveena/software/apache2.2.8src
> > >
> > >
> > > Please check with the error
> > >
> > >
> > >
> > >  On 02/04/2008, *Narendra Verma* <narendra.verma@impetus.co.in> wrote:
> > >
> > > Hi
> > >
> > >
> > >
> > > Exactly,
> > >
> > > This is the path where you want to store your apache installation
> > > rather default location (*/usr/local/apache2...*)
> > >
> > > .
> > >
> > > Narendra
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > *From:* Ch Praveena [mailto:ps050202@gmail.com]
> > > *Sent:* Wednesday, April 02, 2008 6:31 PM
> > > *To:* users@httpd.apache.org
> > >
> > > *Subject:* Re: [users@httpd] Apache installation
> > >
> > >
> > >
> > > Hi,
> > >
> > > Do you mean that *"**/export/home/install/httpd-2.0.63"**, is the path
> > > where my source is about to be stored?? other than under
> > > /usr/local/apache2... **
> > >
> > >
> > >
> > > *
> > >
> > > On 02/04/2008, *Narendra Verma* <narendra.verma@impetus.co.in> wrote:
> > >
> > > *Hi,*
> > >
> > > *Suppose you are installing httpd2.0.63 into
> > > "/export/home/install/httpd-2.0.63"*
> > >
> > > *You are having source of httpd2.0.63  like : *httpd-2.0.63.tar.gz<http://mirrors.enquira.com/apache/httpd/httpd-2.2.8.tar.gz>
> > >
> > > $ gzip –d httpd-2.0.63.tar.gz<http://mirrors.enquira.com/apache/httpd/httpd-2.2.8.tar.gz>
> > >
> > > $ tar xvf httpd-2.0.63.tar
> > >
> > > $ cd  httpd-2.0.63
> > >
> > > *$ ./configure --prefix= /export/home/install/httpd-2.0.63*
> > >
> > > *$ make*
> > >
> > > *$ make install*
> > >
> > > First compete the installation of one version then install another
> > > version.
> > >
> > > And *you are installing httpd2.2.8 into
> > > "/export/home/install/httpd-2.2.8"*
> > >
> > > *You are having source of httpd2.2.8  like : *httpd-2.2.8.tar.gz<http://mirrors.enquira.com/apache/httpd/httpd-2.2.8.tar.gz>
> > >
> > > $ gzip –d httpd-2.2.8.tar.gz<http://mirrors.enquira.com/apache/httpd/httpd-2.2.8.tar.gz>
> > > $ tar xvf httpd-2.2.8.tar
> > >
> > > $ cd  httpd-2.2.8
> > >
> > > *$ ./configure --prefix= /export/home/install/httpd-2.2.8"*
> > >
> > > *$ make*
> > >
> > > *$ make install*
> > >
> > > And now chages the listen port of files :
> > >
> > > 1.             /export/home/infra/install/*httpd-2.0.63*
> > > /conf/httpd.conf
> > >
> > >              search for 'Listen' and change it like
> > >
> > >              Listen 1100
> > >
> > >             2.            /export/home/infra/install/* httpd-2.2.8*
> > > /conf/httpd.conf
> > >
> > >                         Listen 1200
> > >
> > >
> > > Narendra
> > >
> > >
> > >
> > > -----Original Message-----
> > > *From:* Ch Praveena [mailto:ps050202@gmail.com]
> > > *Sent:* Wednesday, April 02, 2008 11:19 AM
> > >
> > >
> > > *To:* users@httpd.apache.org
> > > *Subject:* Re: [users@httpd] Apache installation
> > >
> > >
> > >
> > > Thats great to run both the servers seperately.
> > >
> > > But, let me know where I can change the listen ports and how the
> > > command be replaced. Is it like
> > >
> > > * $ ./configure --prefix=/home/praveena/software*
> > >
> > >
> > > Please correct the command if any mistakes are there. And I want to
> > > run the httpd 2.0.63 with default *./configure* and then, the next
> > > httpd2.2.8 with the above command.
> > >
> > > On 02/04/2008, *Narendra Verma* <narendra.verma@impetus.co.in> wrote:
> > >
> > > Hi,
> > >
> > >
> > >
> > > If you want so then you can make separate directory (installation root
> > > i.e 'prefix') for httpd2.0.63 and 2.2.8 but very important is that your
> > > apache listen port must be different for different installation root.
> > >
> > > For uninstalling it just remove the all content from your installation
> > > directory and make a new installation as you required.It may be giving
> > > problem because you upgrade 2.0.63 to 2.2.8.
> > >
> > > Just try to make new installation from scratch for different versions.
> > > There may be different idea for upgrading but I am not fully confident about
> > > it.
> > >
> > >
> > >
> > >
> > >
> > > Narendra
> > >
> > >
> > >
> > > -----Original Message-----
> > > *From:* Ch Praveena [mailto:ps050202@gmail.com]
> > > *Sent:* Wednesday, April 02, 2008 10:42 AM
> > > *To:* users@httpd.apache.org
> > >
> > > *Subject:* Re: [users@httpd] Apache installation
> > >
> > >
> > >
> > > Hi ,
> > >
> > > Thank you for your responses..
> > > What I mean is, can I have the both apache servers with our
> > > uninstalling them?
> > > But the wrong done by me is, I ve run the ./configure command at the
> > > default only.. I have configured the httpd 2.0.63 version first and later
> > > the httpd2.2.8 version.
> > >
> > > Now, Let me know the way, I can run both the servers when ever needed.
> > > If it is not possible, Let me know a command for uninstalling them
> > > properly.
> > >
> > > On 02/04/2008, *Narendra Verma* <narendra.verma@impetus.co.in> wrote:
> > >
> > > Hi,
> > >
> > >
> > >
> > > Are u using old compiled version of mod-jk(That has been compiled with
> > > httpd2.0.63) with new configured/installedS httpd2.2.8,
> > >
> > > Just try to reinstall mod-jk with your new httpd version , it may
> > > solve the problem.
> > >
> > >
> > >
> > > Narendra
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > *From:* Ch Praveena [mailto:ps050202@gmail.com]
> > > *Sent:* Tuesday, April 01, 2008 7:27 PM
> > > *To:* users@httpd.apache.org
> > > *Subject:* [users@httpd] Apache installation
> > >
> > >
> > >
> > >
> > > Hi all,
> > >
> > > I have installed and set up httpd 2.0.63 version of apache server and
> > > is running good and fine with the implementaion of  clustering  Jboss.  And
> > > when I want  to cluster , there came the need of httpd 2.2.8 version of
> > > apache. So, I  have downloaded and configured with default with out giving
> > > prefix while running ./configure command.. And so, there came the problem
> > > while running, /usr/local/apache2/bin/apachectl start  with an error
> > > [root@praveena httpd-2.2.8]# /usr/local/apache2/bin/apachectl start
> > > httpd: Syntax error on line 1037 of
> > > /usr/local/apache2/conf/httpd.conf: Syntax error on line 3 of
> > > /usr/local/apache2/conf/mod-jk.conf: API module structure 'jk_module' in
> > > file /usr/local/apache2/modules/mod_jk.so is garbled - expected signature
> > > 41503232 but saw 41503230 - perhaps this is not an Apache module DSO, or was
> > > compiled for a different Apache version?
> > >
> > > If I want to uninstall one among them, will the problem be solved?
> > > Or what is the best command in linux, to be given now..
> > >
> > > Please respond at the earliest
> > >
> > >
> > >
> > >
> > > --
> > > Regards,
> > >
> > > Praveena Chalamcharla,
> > > Securview....
> > >
> > >
> > >
> > >
> > > --
> > > Regards,
> > >
> > > Praveena Chalamcharla,
> > > Securview....
> > >
> > >
> > >
> > >
> > > --
> > > Regards,
> > >
> > > Praveena Chalamcharla,
> > > Securview....
> > >
> > >
> > >
> > >
> > > --
> > > Regards,
> > >
> > > Praveena Chalamcharla,
> > > Securview....
> > >
> > >
> > >
> > >
> > > --
> > > Regards,
> > >
> > > Praveena Chalamcharla,
> > > Securview....
> > >
> >
> >
> >
> > --
> > Regards,
> >
> > Praveena Chalamcharla,
> > Securview....
>
>
>
>
> --
> Regards,
>
> Praveena Chalamcharla,
> Securview....




-- 
Regards,

Praveena Chalamcharla,
Securview....

Mime
View raw message