httpd-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Carly Stone <cst...@homechoice.co.uk>
Subject Re: Re: [users@httpd] Newbie Alert! Apache 2.2.6 crash on start
Date Tue, 06 Nov 2007 13:18:34 GMT
Thank you Tom. I found these:

Event Type:    Error
Event Source:    Apache Service
Event Category:    None
Event ID:    3299
Date:        31/10/2007
Time:        16:34:02
User:        N/A
Computer:    CARLY-5KMNWWF1A
Description:
The Apache service named  reported the following error:
>>> [Wed Oct 31 16:34:02 2007] [notice] Disabled use of AcceptEx() 
WinSock2 API     .

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Event Type:    Error
Event Source:    Application Error
Event Category:    None
Event ID:    1000
Date:        31/10/2007
Time:        17:23:47
User:        N/A
Computer:    CARLY-5KMNWWF1A
Description:
Faulting application httpd.exe, version 2.2.6.0, faulting module
libapr-1.dll, version 1.2.11.0, fault address 0x000038dc.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 68 74 74   ure  htt
0018: 70 64 2e 65 78 65 20 32   pd.exe 2
0020: 2e 32 2e 36 2e 30 20 69   .2.6.0 i
0028: 6e 20 6c 69 62 61 70 72   n libapr
0030: 2d 31 2e 64 6c 6c 20 31   -1.dll 1
0038: 2e 32 2e 31 31 2e 30 20   .2.11.0
0040: 61 74 20 6f 66 66 73 65   at offse
0048: 74 20 30 30 30 30 33 38   t 000038
0050: 64 63 0d 0a               dc..

Event Type:    Error
Event Source:    Application Error
Event Category:    (100)
Event ID:    1000
Date:        24/10/2007
Time:        16:08:42
User:        N/A
Computer:    CARLY-5KMNWWF1A
Description:
Faulting application httpd.exe, version 2.2.6.0, faulting module
libapr-1.dll, version 1.2.11.0, fault address 0x000038dc.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 68 74 74   ure  htt
0018: 70 64 2e 65 78 65 20 32   pd.exe 2
0020: 2e 32 2e 36 2e 30 20 69   .2.6.0 i
0028: 6e 20 6c 69 62 61 70 72   n libapr
0030: 2d 31 2e 64 6c 6c 20 31   -1.dll 1
0038: 2e 32 2e 31 31 2e 30 20   .2.11.0
0040: 61 74 20 6f 66 66 73 65   at offse
0048: 74 20 30 30 30 30 33 38   t 000038
0050: 64 63                     dc

And I finally got the following in the command prompt after a lot of
wrangling:
[Mon Nov 05 15:57:18 2007] [notice] Disabled use of AcceptEx() WINSOCK2 API
no listening sockets available, shutting down
unable to open logs

This is going to turn out to be something wrong with my listen directive
  and I'm going to end up feeling like a total newbie. [red face already]

Thanks again
Carly

Tom Hart wrote:
> <div class="moz-text-flowed" style="font-family: -moz-fixed">You 
> mentioned that you didn't see anything in the error log, what about 
> Windows Event Viewer? In my experience, if apache doesn't log an error 
> in the standard error log, then it logged something in event viewer.
>
> Carly Stone wrote:
>> Hi All. Hope you are well.
>> I'm a newbie to Apache and this group, so please forgive my lack of 
>> experience and knowledge. I am trying to install Apache on my home pc 
>> so that I can practice server-side scripting. I have just installed 
>> the latest Apache, but it crashes almost before it starts! No error 
>> log has even been produced. I see the command prompt open and a 
>> message tells me that I have disabled AcceptEx() Winsock2 API, then 
>> XP tells me that Apache has crashed and asks if I want to report the 
>> error. A few days ago M$ told me that something was clashing with a 
>> generic Win32 host process when I reported the error, but when I 
>> applied the fix and rebooted Apache crashed again. M$ then  
>> redirected me back to the same fix.
>>
>> I have not yet installed PHP or MySQL, so I am hoping that they are 
>> not the problem. I tried installing Apache 2.0, but the install kept 
>> failing.
>>
>> I run XP Pro with sp2 and Z is a virtual network drive. I have tried 
>> eliminating unnecessary applications to no avail, even going so far 
>> as to start Apache in Safe Mode - it complained about line 57, the 
>> Listen 80 line, which I commented out. I started Apache again, still 
>> in Safe Mode, and it crashed again. I have also applied the fixes 
>> found at the Apache site, and I am still no better off.
>>
>> I am including the entire text from my httpd.conf file in case I have 
>> changed something that I should not without realising it:
>>
>> #Changes I made cos Apache was crashing 24/10/07
>> EnableSendfile Off
>> EnableMMAP Off
>> Win32DisableAcceptEx
>>
>> #
>> # This is the main Apache HTTP server configuration file.  It 
>> contains the
>> # configuration directives that give the server its instructions.
>> # See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
>> # In particular, see
>> # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
>> # for a discussion of each configuration directive.
>> #
>> # Do NOT simply read the instructions in here without understanding
>> # what they do.  They're here only as hints or reminders.  If you are 
>> unsure
>> # consult the online docs. You have been warned. #
>> # Configuration and logfile names: If the filenames you specify for many
>> # of the server's control files begin with "/" (or "drive:/" for 
>> Win32), the
>> # server will use that explicit path.  If the filenames do *not* begin
>> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
>> # with ServerRoot set to "C:/Program Files/Apache Software 
>> Foundation/Apache2.2" will be interpreted by the
>> # server as "C:/Program Files/Apache Software 
>> Foundation/Apache2.2/logs/foo.log".
>> #
>> # NOTE: Where filenames are specified, you must use forward slashes
>> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
>> # If a drive letter is omitted, the drive on which Apache.exe is located
>> # will be used by default.  It is recommended that you always supply
>> # an explicit drive letter in absolute paths, however, to avoid
>> # confusion.
>> #
>>
>> # ThreadsPerChild: constant number of worker threads in the server 
>> process
>> # MaxRequestsPerChild: maximum  number of requests a server process 
>> serves
>> ThreadsPerChild 250
>> MaxRequestsPerChild  0
>>
>> #
>> # ServerRoot: The top of the directory tree under which the server's
>> # configuration, error, and log files are kept.
>> #
>> # Do not add a slash at the end of the directory path.  If you point
>> # ServerRoot at a non-local disk, be sure to point the LockFile 
>> directive
>> # at a local disk.  If you wish to share the same ServerRoot for 
>> multiple
>> # httpd daemons, you will need to change at least LockFile and PidFile.
>> #
>> ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
>>
>> #
>> # Listen: Allows you to bind Apache to specific IP addresses and/or
>> # ports, instead of the default. See also the <VirtualHost>
>> # directive.
>> #
>> # Change this to Listen on specific IP addresses as shown below to
>> # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
>> #
>> Listen 80
>>
>> #
>> # Dynamic Shared Object (DSO) Support
>> #
>> # To be able to use the functionality of a module which was built as 
>> a DSO you
>> # have to place corresponding `LoadModule' lines at this location so the
>> # directives contained in it are actually available _before_ they are 
>> used.
>> # Statically compiled modules (those listed by `httpd -l') do not need
>> # to be loaded here.
>> #
>> # Example:
>> # LoadModule foo_module modules/mod_foo.so
>> #
>> LoadModule actions_module modules/mod_actions.so
>> LoadModule alias_module modules/mod_alias.so
>> LoadModule asis_module modules/mod_asis.so
>> LoadModule auth_basic_module modules/mod_auth_basic.so
>> #LoadModule auth_digest_module modules/mod_auth_digest.so
>> #LoadModule authn_anon_module modules/mod_authn_anon.so
>> #LoadModule authn_dbm_module modules/mod_authn_dbm.so
>> LoadModule authn_default_module modules/mod_authn_default.so
>> LoadModule authn_file_module modules/mod_authn_file.so
>> #LoadModule authz_dbm_module modules/mod_authz_dbm.so
>> LoadModule authz_default_module modules/mod_authz_default.so
>> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
>> LoadModule authz_host_module modules/mod_authz_host.so
>> LoadModule authz_user_module modules/mod_authz_user.so
>> LoadModule autoindex_module modules/mod_autoindex.so
>> #LoadModule cern_meta_module modules/mod_cern_meta.so
>> LoadModule cgi_module modules/mod_cgi.so
>> #LoadModule dav_module modules/mod_dav.so
>> #LoadModule dav_fs_module modules/mod_dav_fs.so
>> #LoadModule deflate_module modules/mod_deflate.so
>> LoadModule dir_module modules/mod_dir.so
>> LoadModule env_module modules/mod_env.so
>> #LoadModule expires_module modules/mod_expires.so
>> #LoadModule file_cache_module modules/mod_file_cache.so
>> #LoadModule headers_module modules/mod_headers.so
>> LoadModule imagemap_module modules/mod_imagemap.so
>> LoadModule include_module modules/mod_include.so
>> #LoadModule info_module modules/mod_info.so
>> LoadModule isapi_module modules/mod_isapi.so
>> LoadModule log_config_module modules/mod_log_config.so
>> LoadModule mime_module modules/mod_mime.so
>> #LoadModule mime_magic_module modules/mod_mime_magic.so
>> #LoadModule proxy_module modules/mod_proxy.so
>> #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
>> #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
>> #LoadModule proxy_connect_module modules/mod_proxy_connect.so
>> #LoadModule proxy_http_module modules/mod_proxy_http.so
>> #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
>> LoadModule negotiation_module modules/mod_negotiation.so
>> #LoadModule rewrite_module modules/mod_rewrite.so
>> LoadModule setenvif_module modules/mod_setenvif.so
>> #LoadModule speling_module modules/mod_speling.so
>> #LoadModule status_module modules/mod_status.so
>> #LoadModule unique_id_module modules/mod_unique_id.so
>> LoadModule userdir_module modules/mod_userdir.so
>> #LoadModule usertrack_module modules/mod_usertrack.so
>> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
>> #LoadModule ssl_module modules/mod_ssl.so
>>
>> # 'Main' server configuration
>> #
>> # The directives in this section set up the values used by the 'main'
>> # server, which responds to any requests that aren't handled by a
>> # <VirtualHost> definition.  These values also provide defaults for
>> # any <VirtualHost> containers you may define later in the file.
>> #
>> # All of these directives may appear inside <VirtualHost> containers,
>> # in which case these default settings will be overridden for the
>> # virtual host being defined.
>> #
>>
>> #
>> # ServerAdmin: Your address, where problems with the server should be
>> # e-mailed.  This address appears on some server-generated pages, such
>> # as error documents.  e.g. admin@your-domain.com
>> #
>> ServerAdmin cstone@homechoice.co.uk
>>
>> #
>> # ServerName gives the name and port that the server uses to identify 
>> itself.
>> # This can often be determined automatically, but we recommend you 
>> specify
>> # it explicitly to prevent problems during startup.
>> #
>> # If your host doesn't have a registered DNS name, enter its IP 
>> address here.
>> #
>> ServerName localhost
>>
>> #
>> # DocumentRoot: The directory out of which you will serve your
>> # documents. By default, all requests are taken from this directory, but
>> # symbolic links and aliases may be used to point to other locations.
>> #
>> DocumentRoot "Z:/home/localhost/www"
>>
>> #
>> # Each directory to which Apache has access can be configured with 
>> respect
>> # to which services and features are allowed and/or disabled in that
>> # directory (and its subdirectories).
>> #
>> # First, we configure the "default" to be a very restrictive set of
>> # features. #
>> <Directory Z:/>
>>    Options Indexes Includes
>>    AllowOverride All
>>    Allow from all
>> </Directory>
>>
>> #
>> # Note that from this point forward you must specifically allow
>> # particular features to be enabled - so if something's not working as
>> # you might expect, make sure that you have specifically enabled it
>> # below.
>> #
>>
>> #
>> # This should be changed to whatever you set DocumentRoot to.
>> #
>>
>>
>> #
>> # DirectoryIndex: sets the file that Apache will serve if a directory
>> # is requested.
>> #
>> <IfModule dir_module>
>>    DirectoryIndex index.htm index.html
>> </IfModule>
>>
>> #
>> # The following lines prevent .htaccess and .htpasswd files from being
>> # viewed by Web clients.
>> #
>> <FilesMatch "^\.ht">
>>    Order allow,deny
>>    Deny from all
>> </FilesMatch>
>>
>> #
>> # ErrorLog: The location of the error log file.
>> # If you do not specify an ErrorLog directive within a <VirtualHost>
>> # container, error messages relating to that virtual host will be
>> # logged here.  If you *do* define an error logfile for a <VirtualHost>
>> # container, that host's errors will be logged there and not here.
>> #
>> ErrorLog logs/error.log
>>
>> #
>> # LogLevel: Control the number of messages logged to the error_log.
>> # Possible values include: debug, info, notice, warn, error, crit,
>> # alert, emerg.
>> #
>> LogLevel warn
>>
>> <IfModule log_config_module>
>>    #
>>    # The following directives define some format nicknames for use with
>>    # a CustomLog directive (see below).
>>    #
>>    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" 
>> \"%{User-Agent}i\"" combined
>>    LogFormat "%h %l %u %t \"%r\" %>s %b" common
>>
>>    <IfModule logio_module>
>>      # You need to enable mod_logio.c to use %I and %O
>>      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" 
>> \"%{User-Agent}i\" %I %O" combinedio
>>    </IfModule>
>>
>>    #
>>    # The location and format of the access logfile (Common Logfile 
>> Format).
>>    # If you do not define any access logfiles within a <VirtualHost>
>>    # container, they will be logged here.  Contrariwise, if you *do*
>>    # define per-<VirtualHost> access logfiles, transactions will be
>>    # logged therein and *not* in this file.
>>    #
>>    CustomLog logs/access.log common
>>
>>    #
>>    # If you prefer a logfile with access, agent, and referer information
>>    # (Combined Logfile Format) you can use the following directive.
>>    #
>>    #CustomLog logs/access.log combined
>> </IfModule>
>>
>> <IfModule alias_module>
>>    #
>>    # Redirect: Allows you to tell clients about documents that used to
>>    # exist in your server's namespace, but do not anymore. The client
>>    # will make a new request for the document at its new location.
>>    # Example:
>>    # Redirect permanent /foo http:///bar
>>
>>    #
>>    # Alias: Maps web paths into filesystem paths and is used to
>>    # access content that does not live under the DocumentRoot.
>>    # Example:
>>    # Alias /webpath /full/filesystem/path
>>    #
>>    # If you include a trailing / on /webpath then the server will
>>    # require it to be present in the URL.  You will also likely
>>    # need to provide a <Directory> section to allow access to
>>    # the filesystem path.
>>
>>    #
>>    # ScriptAlias: This controls which directories contain server 
>> scripts.
>>    # ScriptAliases are essentially the same as Aliases, except that
>>    # documents in the target directory are treated as applications and
>>    # run by the server when requested rather than as documents sent 
>> to the
>>    # client.  The same rules about trailing "/" apply to ScriptAlias
>>    # directives as to Alias.
>>    #
>>    ScriptAlias /cgi-bin/ "z:/home/localhost/cgi/"
>>    ScriptAlias /cgi/ "z:/home/localhost/cgi/"
>>
>> </IfModule>
>>
>> #
>> # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" 
>> should be changed to whatever your ScriptAliased
>> # CGI directory exists, if you have that configured.
>> #
>>
>>
>> #
>> # Apache parses all CGI scripts for the shebang line by default.
>> # This comment line, the first line of the script, consists of the 
>> symbols
>> # pound (#) and exclamation (!) followed by the path of the program that
>> # can execute this specific script.  For a perl script, with perl.exe in
>> # the C:\Program Files\Perl directory, the shebang line should be:
>>
>>   #!c:/program files/perl/perl
>>
>> # Note you _must_not_ indent the actual shebang line, and it must be the
>> # first line of the file.  Of course, CGI processing must be enabled by
>> # the appropriate ScriptAlias or Options ExecCGI directives for the 
>> files
>> # or directory in question.
>> #
>> # However, Apache on Windows allows either the Unix behavior above, 
>> or can
>> # use the Registry to match files by extention.  The command to execute
>> # a file of this type is retrieved from the registry by the same 
>> method as
>> # the Windows Explorer would use to handle double-clicking on a file.
>> # These script actions can be configured from the Windows Explorer 
>> View menu,
>> # 'Folder Options', and reviewing the 'File Types' tab.  Clicking the 
>> Edit
>> # button allows you to modify the Actions, of which Apache 1.3 
>> attempts to
>> # perform the 'Open' Action, and failing that it will try the shebang 
>> line.
>> # This behavior is subject to change in Apache release 2.0.
>> #
>> # Each mechanism has it's own specific security weaknesses, from the 
>> means
>> # to run a program you didn't intend the website owner to invoke, and 
>> the
>> # best method is a matter of great debate.
>> #
>> # To enable the this Windows specific behavior (and therefore 
>> -disable- the
>> # equivilant Unix behavior), uncomment the following directive:
>> #
>> #ScriptInterpreterSource registry
>> #
>> # The directive above can be placed in individual <Directory> blocks 
>> or the
>> # .htaccess file, with either the 'registry' (Windows behavior) or 
>> 'script'
>> # (Unix behavior) option, and will override this server default option.
>> #
>>
>> #
>> # DefaultType: the default MIME type the server will use for a document
>> # if it cannot otherwise determine one, such as from filename 
>> extensions.
>> # If your server contains mostly text or HTML documents, "text/plain" is
>> # a good value.  If most of your content is binary, such as applications
>> # or images, you may want to use "application/octet-stream" instead to
>> # keep browsers from trying to display binary files as though they are
>> # text.
>> #
>> DefaultType text/plain
>>
>> <IfModule mime_module>
>>    #
>>    # TypesConfig points to the file containing the list of mappings from
>>    # filename extension to MIME-type.
>>    #
>>    TypesConfig conf/mime.types
>>
>>    #
>>    # AddType allows you to add to or override the MIME configuration
>>    # file specified in TypesConfig for specific file types.
>>    #
>>    #AddType application/x-gzip .tgz
>>    #
>>    # AddEncoding allows you to have certain browsers uncompress
>>    # information on the fly. Note: Not all browsers support this.
>>    #
>>    #AddEncoding x-compress .Z
>>    #AddEncoding x-gzip .gz .tgz
>>    #
>>    # If the AddEncoding directives above are commented-out, then you
>>    # probably should define those extensions to indicate media types:
>>    #
>>    AddType application/x-compress .Z
>>    AddType application/x-gzip .gz .tgz
>>
>>    #
>>    # AddHandler allows you to map certain file extensions to "handlers":
>>    # actions unrelated to filetype. These can be either built into 
>> the server
>>    # or added with the Action directive (see below)
>>    #
>>    # To use CGI scripts outside of ScriptAliased directories:
>>    # (You will also need to add "ExecCGI" to the "Options" directive.)
>>    #
>>    AddHandler cgi-script .bat .exe .cgi
>>
>>    # For type maps (negotiated resources):
>>    #AddHandler type-map var
>>
>>    #
>>    # Filters allow you to process content before it is sent to the 
>> client.
>>    #
>>    # To parse .shtml files for server-side includes (SSI):
>>    # (You will also need to add "Includes" to the "Options" directive.)
>>    #
>>    AddType text/html .shtml
>>    AddHandler server-parsed .shtml .html .htm
>>    #AddOutputFilter INCLUDES .shtml
>> </IfModule>
>>
>> #
>> # The mod_mime_magic module allows the server to use various hints 
>> from the
>> # contents of the file itself to determine its type.  The MIMEMagicFile
>> # directive tells the module where the hint definitions are located.
>> #
>> #MIMEMagicFile conf/magic
>>
>> #
>> # Customizable error responses come in three flavors:
>> # 1) plain text 2) local redirects 3) external redirects
>> #
>> # Some examples:
>> #ErrorDocument 500 "The server made a boo boo."
>> #ErrorDocument 404 /missing.html
>> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
>> #ErrorDocument 402 http:///subscription_info.html
>> #
>>
>> #
>> # EnableMMAP and EnableSendfile: On systems that support it,
>> # memory-mapping or the sendfile syscall is used to deliver
>> # files.  This usually improves server performance, but must
>> # be turned off when serving from networked-mounted
>> # filesystems or if support for these functions is otherwise
>> # broken on your system.
>> #
>> #EnableMMAP off
>> #EnableSendfile off
>>
>> # Supplemental configuration
>> #
>> # The configuration files in the conf/extra/ directory can be
>> # included to add extra features or to modify the default 
>> configuration of
>> # the server, or you may simply copy their contents here and change as
>> # necessary.
>>
>> # Server-pool management (MPM specific)
>> #Include conf/extra/httpd-mpm.conf
>>
>> # Multi-language error messages
>> #Include conf/extra/httpd-multilang-errordoc.conf
>>
>> # Fancy directory listings
>> #Include conf/extra/httpd-autoindex.conf
>>
>> # Language settings
>> #Include conf/extra/httpd-languages.conf
>>
>> # User home directories
>> #Include conf/extra/httpd-userdir.conf
>>
>> # Real-time info on requests and configuration
>> #Include conf/extra/httpd-info.conf
>>
>> # Virtual hosts
>> #Include conf/extra/httpd-vhosts.conf
>>
>> # Local access to the Apache HTTP Server Manual
>> #Include conf/extra/httpd-manual.conf
>>
>> # Distributed authoring and versioning (WebDAV)
>> #Include conf/extra/httpd-dav.conf
>>
>> # Various default settings
>> #Include conf/extra/httpd-default.conf
>>
>> # Secure (SSL/TLS) connections
>> #Include conf/extra/httpd-ssl.conf
>> #
>> # Note: The following must must be present to support
>> #       starting without SSL on platforms with no /dev/random equivalent
>> #       but a statically compiled-in mod_ssl.
>> #
>> <IfModule ssl_module>
>> SSLRandomSeed startup builtin
>> SSLRandomSeed connect builtin
>> </IfModule>
>>
>> TIA
>> All help is appreciated.
>> Carly
>>
>
> </div>

---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
   "   from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org


Mime
View raw message