httpd-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From Craig Dunigan <cduni...@doit.wisc.edu>
Subject RE: [users@httpd] Error while installing Apache 1.3.33 on Solaris 10
Date Thu, 12 May 2005 16:08:56 GMT
Dunno, looks like a straightforward file/directory permissions problem to me.  
Make sure you have write privileges to both the source and destination
directories, or run configure and make under sudo.

--
Craig

On Thu, 12 May 2005, Harish Sundaram wrote:

> Check whether Ctrl-M characters got transferred in your code when u
> transferred the files on to the Solaris machine.
> If that is the case, transfer file in ascii mode.....and try.
> 
> Thanks and Regards,
> Harish.
> x 5337.
> 
> -----Original Message-----
> From: Rahul Kohli [mailto:rahul_kohli@infosys.com]
> Sent: Thursday, May 12, 2005 9:08 PM
> To: users@httpd.apache.org
> Subject: [users@httpd] Error while installing Apache 1.3.33 on Solaris 10
> 
> 
> Hi All,
> 
> I am trying to install Apache 1.3.33 on Solaris 10 machine but am facing
> certain issues while doing so.
> The gcc version on my machine is "gcc version 3.4.3
> (csl-sol210-3_4-branch+sol_rpath)". The steps and the error faced are
> mentioned below.
> 
> 1)
> configure --prefix=/test/self/apache1333 --enable-module=proxy   --enable-sh
> ared=proxy
> Configuring for Apache, Version 1.3.33
>  + using installation path layout: Apache (config.layout)
> Creating Makefile
> Creating Configuration.apaci in src
>  + enabling mod_so for DSO support
> Creating Makefile in src
>  + configured for Solaris 2100 platform
>  + setting C compiler to gcc
>  + setting C pre-processor to gcc -E
>  + using "tr [a-z] [A-Z]" to uppercase
>  + checking for system header files
>  + adding selected modules
>  + using builtin Expat
>  + checking sizeof various data types
>  + doing sanity check on compiler and options
> ./Configure: support/Makefile: cannot create
> ./Configure: support/Makefile: cannot create
> Creating Makefile in src/support
> ./Configure: regex/Makefile: cannot create
> ./Configure: regex/Makefile: cannot create
> Creating Makefile in src/regex
> ./Configure: os/unix/Makefile: cannot create
> ./Configure: os/unix/Makefile: cannot create
> Creating Makefile in src/os/unix
> ./Configure: ap/Makefile: cannot create
> ./Configure: ap/Makefile: cannot create
> Creating Makefile in src/ap
> ./Configure: main/Makefile: cannot create
> ./Configure: main/Makefile: cannot create
> ./Configure: lib/Makefile: cannot create
> ./Configure: lib/Makefile: cannot create
> ./Configure: lib/Makefile: cannot create
> Creating Makefile in src/main
> ./Configure: lib/expat-lite/Makefile: cannot create
> ./Configure: lib/expat-lite/Makefile: cannot create
> ./Configure: modules/Makefile: cannot create
> ./Configure: modules/Makefile: cannot create
> ./Configure: modules/Makefile: cannot create
> Creating Makefile in src/lib/expat-lite
> ./Configure: modules/standard/Makefile: cannot create
> ./Configure: modules/standard/Makefile: cannot create
> ./Configure: modules/standard/Makefile: cannot create
> ./Configure: modules/standard/Makefile: cannot create
> Creating Makefile in src/modules/standard
> 
> 2) On executing the "make" command I am getting the following error:
> ===> src
> ===> src/regex
> <=== src/regex
> ===> src/os/unix
> gcc -c  -I../../os/unix -I../../include   -DSOLARIS2=2100 -DUSE_HSREGEX -DUS
> E_EXPAT -I../../lib/expat-lite `../../apaci` os.c
> In file included from /usr/include/signal.h:26,
>                  from /usr/include/sys/siginfo.h:25,
>                  from /usr/include/sys/wait.h:24,
>                  from ../../include/ap_config.h:1079,
>                  from os.c:21:
> /usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
> In file included from /usr/include/sys/siginfo.h:25,
>                  from /usr/include/sys/wait.h:24,
>                  from ../../include/ap_config.h:1079,
>                  from os.c:21:
> /usr/include/signal.h:111: error: parse error before "siginfo_t"
> /usr/include/signal.h:113: error: parse error before "siginfo_t"
> In file included from /usr/include/sys/wait.h:24,
>                  from ../../include/ap_config.h:1079,
>                  from os.c:21:
> /usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
> /usr/include/sys/siginfo.h:292: error: parse error before '}' token
> /usr/include/sys/siginfo.h:294: error: parse error before '}' token
> /usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
> /usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
> /usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
> /usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
> /usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
> /usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
> /usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
> /usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
> /usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
> /usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
> /usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
> /usr/include/sys/siginfo.h:426: error: parse error before '}' token
> /usr/include/sys/siginfo.h:428: error: parse error before '}' token
> /usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
> /usr/include/sys/siginfo.h:437: error: parse error before '}' token
> In file included from ../../include/ap_config.h:1079,
>                  from os.c:21:
> /usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
> *** Error code 1
> make: Fatal error: Command failed for target `os.o'
> Current working directory /test/self/INs/apache_1.3.33/src/os/unix
> *** Error code 1
> The following command caused the error:
> for i in regex os/unix ap main lib modules; do \
>         echo "===> src/$i"; \
>         case ".Solaris 2100" in \
>           .OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
>                       *) ( cd $i && make  SDP='src/' CC='gcc'
> AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite
> `./apaci`' RANLIB='ranlib' OPTIM='') || exit 1;; \
>         esac; \
>         echo "<=== src/$i"; \
> done
> make: Fatal error: Command failed for target `subdirs'
> Current working directory /test/self/INs/apache_1.3.33/src
> *** Error code 1
> The following command caused the error:
> case "xsun4u-sun-solaris2.2100" in \
>   x*390*) _C89_STEPS="0xffffffff"; export _C89_STEPS;; \
> esac; \
> cd ./src; make  SDP=src/ all
> make: Fatal error: Command failed for target `build-std'
> Current working directory /test/self/INs/apache_1.3.33
> *** Error code 1
> The following command caused the error:
> make -f ./Makefile  root= build-std
> make: Fatal error: Command failed for target `build'
> 
> Please suggest how can I resolve this issue.
> 
> Thanks,
> Rahul
> 


---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
   "   from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org


Mime
View raw message