httpd-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Thomas C. Meggs" <...@plik.net>
Subject Re: [users@httpd] Apache 2.0.43 on OpenBSD 3.0 freezes or behaves strangely
Date Mon, 09 Dec 2002 16:12:56 GMT
Well, Apache2 is in fact the best available version of Apache.

However, PHP support for Apache2 is only developmental at this point. I 
have heard a time frame of about 4 or 5 months from PHP people before 
PHP will be supported under Apache2.

Regards,
Tom

Jean-Pierre Tanguay wrote:
> Thanks for the tip!
>  
> I'll try the latest 1.3X branch instead of the 2.X. I tried the second 
> because on the Apache site, they say : "is the best available version". 
> Obviously, this is not the case in all situations.
>  
> Cheers!
>  
> Jean-Pierre 
>  
>  
> ----- Original Message -----
> From: "J. Greenlees" <jaqui@shaw.ca <mailto:jaqui@shaw.ca>>
> To: <users@httpd.apache.org <mailto:users@httpd.apache.org>>
> Sent: Sunday, December 08, 2002 6:49 PM
> Subject: Re: [users@httpd] Apache 2.0.43 on OpenBSD 3.0 freezes or 
> behaves strangely
> 
>  > Jean,
>  > my apache 1.3x and php 4.x work fine right out of box with mandrake.
>  > attaching the default conf files for apache.
>  >
>  > all six of them.
>  >
>  > Jaqui
>  >
> 
> ------------------------------------------------------------------------
> 
>  > ### Main Configuration Section
>  > ### You really shouldn't change these settings unless you're a guru
>  > ###
>  > ServerType standalone
>  > ServerRoot /etc/httpd
>  > #ServerName localhost
>  > #LockFile /etc/httpd/httpd.lock
>  > PidFile /var/run/httpd.pid
>  > ScoreBoardFile /etc/httpd/httpd.scoreboard
>  > ErrorLog logs/error_log
>  > LogLevel warn
>  > ResourceConfig /dev/null
>  > AccessConfig /dev/null
>  > DocumentRoot /var/www/html
>  >
>  >
>  > ### Dynamic Shared Object (DSO) Support
>  > ###
>  > ###
>  > #LoadModule mmap_static_module modules/mod_mmap_static.so
>  > LoadModule env_module         modules/mod_env.so
>  > LoadModule config_log_module  modules/mod_log_config.so
>  > LoadModule agent_log_module   modules/mod_log_agent.so
>  > LoadModule referer_log_module modules/mod_log_referer.so
>  > #LoadModule mime_magic_module  modules/mod_mime_magic.so
>  > LoadModule mime_module        modules/mod_mime.so
>  > LoadModule negotiation_module modules/mod_negotiation.so
>  > LoadModule status_module      modules/mod_status.so
>  > LoadModule info_module        modules/mod_info.so
>  > LoadModule includes_module    modules/mod_include.so
>  > LoadModule autoindex_module   modules/mod_autoindex.so
>  > LoadModule dir_module         modules/mod_dir.so
>  > LoadModule cgi_module         modules/mod_cgi.so
>  > LoadModule asis_module        modules/mod_asis.so
>  > LoadModule imap_module        modules/mod_imap.so
>  > LoadModule action_module      modules/mod_actions.so
>  > #LoadModule speling_module     modules/mod_speling.so
>  > LoadModule userdir_module     modules/mod_userdir.so
>  > LoadModule proxy_module       modules/libproxy.so
>  > LoadModule alias_module       modules/mod_alias.so
>  > LoadModule rewrite_module     modules/mod_rewrite.so
>  > LoadModule access_module      modules/mod_access.so
>  > LoadModule auth_module        modules/mod_auth.so
>  > LoadModule anon_auth_module   modules/mod_auth_anon.so
>  > #LoadModule dbm_auth_module    modules/mod_auth_dbm.so
>  > #LoadModule db_auth_module     modules/mod_auth_db.so
>  > LoadModule digest_module      modules/mod_digest.so
>  > #LoadModule cern_meta_module   modules/mod_cern_meta.so
>  > LoadModule expires_module     modules/mod_expires.so
>  > LoadModule headers_module     modules/mod_headers.so
>  > LoadModule usertrack_module   modules/mod_usertrack.so
>  > #LoadModule example_module     modules/mod_example.so
>  > #LoadModule unique_id_module   modules/mod_unique_id.so
>  > LoadModule setenvif_module    modules/mod_setenvif.so
>  > <IfDefine HAVE_PHP4>
>  > LoadModule php4_module    extramodules/libphp4.so
>  > </IfDefine>
>  > LoadModule vhost_alias_module modules/mod_vhost_alias.so
>  >
>  > #  Reconstruction of the complete module list from all available modules
>  > #  (static and shared ones) to achieve correct module execution order.
>  > #  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
>  > ClearModuleList
>  > #AddModule mod_mmap_static.c
>  > AddModule mod_env.c
>  > AddModule mod_log_config.c
>  > AddModule mod_log_agent.c
>  > AddModule mod_log_referer.c
>  > #AddModule mod_mime_magic.c
>  > AddModule mod_mime.c
>  > AddModule mod_negotiation.c
>  > AddModule mod_status.c
>  > AddModule mod_info.c
>  > AddModule mod_include.c
>  > AddModule mod_autoindex.c
>  > AddModule mod_dir.c
>  > AddModule mod_cgi.c
>  > AddModule mod_asis.c
>  > AddModule mod_imap.c
>  > AddModule mod_actions.c
>  > #AddModule mod_speling.c
>  > AddModule mod_userdir.c
>  > AddModule mod_proxy.c
>  > AddModule mod_alias.c
>  > AddModule mod_rewrite.c
>  > AddModule mod_access.c
>  > AddModule mod_auth.c
>  > AddModule mod_auth_anon.c
>  > #AddModule mod_auth_dbm.c
>  > #AddModule mod_auth_db.c
>  > AddModule mod_digest.c
>  > #AddModule mod_cern_meta.c
>  > AddModule mod_expires.c
>  > AddModule mod_headers.c
>  > AddModule mod_usertrack.c
>  > #AddModule mod_example.c
>  > #AddModule mod_unique_id.c
>  > AddModule mod_so.c
>  > AddModule mod_setenvif.c
>  > <IfDefine HAVE_PHP4>
>  > AddModule mod_php4.c
>  > </IfDefine>
>  > AddModule mod_vhost_alias.c
>  >
>  > ###
>  > ### Global Configuration
>  > ###
>  > # We now support multiple apache configurations on the same server. In
>  > # common.conf, we put all directives that are common to all 
> implementations
>  > # (httpd, httpd-perl, etc.)
>  > Include conf/commonhttpd.conf
>  >
>  >
>  > ###
>  > ### IP Address/Port and Proxied configuration section
>  > ###
>  > # The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you
>  > # are using a proxy or accelerator, like the Apache-SGI or khttpd, so 
> that
>  > # the fast web server serves static content while Apache handles the
>  > # cgi or php files
>  >
>  > #BindAddress *
>  > <IfDefine APACHEPROXIED>
>  >     Port 8080
>  >     Listen 8080
>  > </IfDefine>
>  > <IfDefine !APACHEPROXIED>
>  >     Port 80
>  >     Listen 80
>  > </IfDefine>
>  >
>  > # Likewise, we can set apache as the server by default and send perl
>  > # requests via ProxyPass to apache-mod_perl. It increases performance
>  > # since the perl interpreter is only used for perl and the standard 
> apache
>  > # does all the html and image files, with a smaller footprint.
>  > #
>  > # If you install apache and apache-mod_perl, this is the default config.
>  > # If you don't want two web servers to use perl, uninstall apache, and
>  > # apache-mod_perl will not be proxied.
>  >
>  > <IfDefine PERLPROXIED>
>  >     RewriteEngine on
>  >     RewriteRule ^proxy:.*  -  [F]
>  >     RewriteRule ^(.*\/perl\/.*)$  http://%{HTTP_HOST}:8200$1 [P]
>  >     RewriteRule ^(.*\/cgi-perl\/.*)$  http://%{HTTP_HOST}:8200$1 [P]
>  > </IfDefine>
>  >
>  > ###
>  > ### Log configuration Section
>  > ###
>  >
>  > #Single logfile with access, agent and referer information
>  > #This is the default, if vlogs are not defined for the main server
>  > CustomLog logs/access_log combined env=!VLOG
>  > #If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
>  > CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG
>  >
>  >
>  > ###
>  > ### Virtual Hosts
>  > ###
>  > # We include different templates for Virtual Hosting. Have a look in the
>  > # vhosts directory and modify to suit your needs.
>  > Include conf/vhosts/Vhosts.conf
>  > #Include conf/vhosts/DynamicVhosts.conf
>  > #Include conf/vhosts/VirtualHomePages.conf
>  >
>  >
>  > ###
>  > ### Performance settings Section
>  > ###
>  > #
>  > # Timeout: The number of seconds before receives and sends time out.
>  > #
>  > Timeout 300
>  >
>  > #
>  > # KeepAlive: Whether or not to allow persistent connections (more than
>  > # one request per connection). Set to "Off" to deactivate.
>  > #
>  > KeepAlive On
>  >
>  > #
>  > # MaxKeepAliveRequests: The maximum number of requests to allow
>  > # during a persistent connection. Set to 0 to allow an unlimited amount.
>  > # We recommend you leave this number high, for maximum performance.
>  > #
>  > MaxKeepAliveRequests 100
>  >
>  > #
>  > # KeepAliveTimeout: Number of seconds to wait for the next request 
> from the
>  > # same client on the same connection.
>  > #
>  > KeepAliveTimeout 15
>  >
>  > #
>  > # Server-pool size regulation.  Rather than making you guess how many
>  > # server processes you need, Apache dynamically adapts to the load it
>  > # sees --- that is, it tries to maintain enough server processes to
>  > # handle the current load, plus a few spare servers to handle transient
>  > # load spikes (e.g., multiple simultaneous requests from a single
>  > # Netscape browser).
>  > #
>  > # It does this by periodically checking how many servers are waiting
>  > # for a request.  If there are fewer than MinSpareServers, it creates
>  > # a new spare.  If there are more than MaxSpareServers, some of the
>  > # spares die off.  The default values are probably OK for most sites.
>  > #
>  > MinSpareServers 4
>  > MaxSpareServers 10
>  >
>  > #
>  > # Number of servers to start initially --- should be a reasonable 
> ballpark
>  > # figure.
>  > #
>  > StartServers 4
>  >
>  > #
>  > # Limit on total number of servers running, i.e., limit on the number
>  > # of clients who can simultaneously connect --- if this limit is ever
>  > # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
>  > # It is intended mainly as a brake to keep a runaway server from taking
>  > # the system with it as it spirals down...
>  > #
>  > MaxClients 150
>  >
>  > #
>  > # MaxRequestsPerChild: the number of requests each child process is
>  > # allowed to process before the child dies.  The child will exit so
>  > # as to avoid problems after prolonged use when Apache (and maybe the
>  > # libraries it uses) leak memory or other resources.  On most 
> systems, this
>  > # isn't really needed, but a few (such as Solaris) do have notable leaks
>  > # in the libraries. For these platforms, set to something like 10000
>  > # or so; a setting of 0 means unlimited.
>  > #
>  > # NOTE: This value does not include keepalive requests after the initial
>  > #       request per connection. For example, if a child process handles
>  > #       an initial request and 10 subsequent "keptalive" requests, it
>  > #       would only count as 1 request towards this limit.
>  > #
>  > MaxRequestsPerChild 500
>  >
>  > Include  conf/addon-modules/php.conf
>  >
> 
> ------------------------------------------------------------------------
> 
>  > ### Main Configuration Section
>  > ### You really shouldn't change these settings unless you're a guru
>  > ###
>  > ServerType standalone
>  > ServerRoot /etc/httpd
>  > #ServerName localhost
>  > #LockFile /etc/httpd/httpd.lock
>  > PidFile /var/run/httpd.pid
>  > ScoreBoardFile /etc/httpd/httpd.scoreboard
>  > ErrorLog logs/error_log
>  > LogLevel warn
>  > ResourceConfig /dev/null
>  > AccessConfig /dev/null
>  > DocumentRoot /var/www/html
>  >
>  >
>  > ### Dynamic Shared Object (DSO) Support
>  > ###
>  > ###
>  > #LoadModule mmap_static_module modules/mod_mmap_static.so
>  > LoadModule env_module         modules/mod_env.so
>  > LoadModule config_log_module  modules/mod_log_config.so
>  > LoadModule agent_log_module   modules/mod_log_agent.so
>  > LoadModule referer_log_module modules/mod_log_referer.so
>  > #LoadModule mime_magic_module  modules/mod_mime_magic.so
>  > LoadModule mime_module        modules/mod_mime.so
>  > LoadModule negotiation_module modules/mod_negotiation.so
>  > LoadModule status_module      modules/mod_status.so
>  > LoadModule info_module        modules/mod_info.so
>  > LoadModule includes_module    modules/mod_include.so
>  > LoadModule autoindex_module   modules/mod_autoindex.so
>  > LoadModule dir_module         modules/mod_dir.so
>  > LoadModule cgi_module         modules/mod_cgi.so
>  > LoadModule asis_module        modules/mod_asis.so
>  > LoadModule imap_module        modules/mod_imap.so
>  > LoadModule action_module      modules/mod_actions.so
>  > #LoadModule speling_module     modules/mod_speling.so
>  > LoadModule userdir_module     modules/mod_userdir.so
>  > LoadModule proxy_module       modules/libproxy.so
>  > LoadModule alias_module       modules/mod_alias.so
>  > LoadModule rewrite_module     modules/mod_rewrite.so
>  > LoadModule access_module      modules/mod_access.so
>  > LoadModule auth_module        modules/mod_auth.so
>  > LoadModule anon_auth_module   modules/mod_auth_anon.so
>  > #LoadModule dbm_auth_module    modules/mod_auth_dbm.so
>  > #LoadModule db_auth_module     modules/mod_auth_db.so
>  > LoadModule digest_module      modules/mod_digest.so
>  > #LoadModule cern_meta_module   modules/mod_cern_meta.so
>  > LoadModule expires_module     modules/mod_expires.so
>  > LoadModule headers_module     modules/mod_headers.so
>  > LoadModule usertrack_module   modules/mod_usertrack.so
>  > #LoadModule example_module     modules/mod_example.so
>  > #LoadModule unique_id_module   modules/mod_unique_id.so
>  > LoadModule setenvif_module    modules/mod_setenvif.so
>  > LoadModule vhost_alias_module modules/mod_vhost_alias.so
>  >
>  > #  Reconstruction of the complete module list from all available modules
>  > #  (static and shared ones) to achieve correct module execution order.
>  > #  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
>  > ClearModuleList
>  > #AddModule mod_mmap_static.c
>  > AddModule mod_env.c
>  > AddModule mod_log_config.c
>  > AddModule mod_log_agent.c
>  > AddModule mod_log_referer.c
>  > #AddModule mod_mime_magic.c
>  > AddModule mod_mime.c
>  > AddModule mod_negotiation.c
>  > AddModule mod_status.c
>  > AddModule mod_info.c
>  > AddModule mod_include.c
>  > AddModule mod_autoindex.c
>  > AddModule mod_dir.c
>  > AddModule mod_cgi.c
>  > AddModule mod_asis.c
>  > AddModule mod_imap.c
>  > AddModule mod_actions.c
>  > #AddModule mod_speling.c
>  > AddModule mod_userdir.c
>  > AddModule mod_proxy.c
>  > AddModule mod_alias.c
>  > AddModule mod_rewrite.c
>  > AddModule mod_access.c
>  > AddModule mod_auth.c
>  > AddModule mod_auth_anon.c
>  > #AddModule mod_auth_dbm.c
>  > #AddModule mod_auth_db.c
>  > AddModule mod_digest.c
>  > #AddModule mod_cern_meta.c
>  > AddModule mod_expires.c
>  > AddModule mod_headers.c
>  > AddModule mod_usertrack.c
>  > #AddModule mod_example.c
>  > #AddModule mod_unique_id.c
>  > AddModule mod_so.c
>  > AddModule mod_setenvif.c
>  > AddModule mod_vhost_alias.c
>  >
>  > ###
>  > ### Global Configuration
>  > ###
>  > # We now support multiple apache configurations on the same server. In
>  > # common.conf, we put all directives that are common to all 
> implementations
>  > # (httpd, httpd-perl, etc.)
>  > Include conf/commonhttpd.conf
>  >
>  >
>  > ###
>  > ### IP Address/Port and Proxied configuration section
>  > ###
>  > # The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you
>  > # are using a proxy or accelerator, like the Apache-SGI or khttpd, so 
> that
>  > # the fast web server serves static content while Apache handles the
>  > # cgi or php files
>  >
>  > #BindAddress *
>  > <IfDefine APACHEPROXIED>
>  >     Port 8080
>  >     Listen 8080
>  > </IfDefine>
>  > <IfDefine !APACHEPROXIED>
>  >     Port 80
>  >     Listen 80
>  > </IfDefine>
>  >
>  > # Likewise, we can set apache as the server by default and send perl
>  > # requests via ProxyPass to apache-mod_perl. It increases performance
>  > # since the perl interpreter is only used for perl and the standard 
> apache
>  > # does all the html and image files, with a smaller footprint.
>  > #
>  > # If you install apache and apache-mod_perl, this is the default config.
>  > # If you don't want two web servers to use perl, uninstall apache, and
>  > # apache-mod_perl will not be proxied.
>  >
>  > <IfDefine PERLPROXIED>
>  >     RewriteEngine on
>  >     RewriteRule ^proxy:.*  -  [F]
>  >     RewriteRule ^(.*\/perl\/.*)$  http://%{HTTP_HOST}:8200$1 [P]
>  >     RewriteRule ^(.*\/cgi-perl\/.*)$  http://%{HTTP_HOST}:8200$1 [P]
>  > </IfDefine>
>  >
>  > ###
>  > ### Log configuration Section
>  > ###
>  >
>  > #Single logfile with access, agent and referer information
>  > #This is the default, if vlogs are not defined for the main server
>  > CustomLog logs/access_log combined env=!VLOG
>  > #If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
>  > CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG
>  >
>  >
>  > ###
>  > ### Virtual Hosts
>  > ###
>  > # We include different templates for Virtual Hosting. Have a look in the
>  > # vhosts directory and modify to suit your needs.
>  > Include conf/vhosts/Vhosts.conf
>  > #Include conf/vhosts/DynamicVhosts.conf
>  > #Include conf/vhosts/VirtualHomePages.conf
>  >
>  >
>  > ###
>  > ### Performance settings Section
>  > ###
>  > #
>  > # Timeout: The number of seconds before receives and sends time out.
>  > #
>  > Timeout 300
>  >
>  > #
>  > # KeepAlive: Whether or not to allow persistent connections (more than
>  > # one request per connection). Set to "Off" to deactivate.
>  > #
>  > KeepAlive On
>  >
>  > #
>  > # MaxKeepAliveRequests: The maximum number of requests to allow
>  > # during a persistent connection. Set to 0 to allow an unlimited amount.
>  > # We recommend you leave this number high, for maximum performance.
>  > #
>  > MaxKeepAliveRequests 100
>  >
>  > #
>  > # KeepAliveTimeout: Number of seconds to wait for the next request 
> from the
>  > # same client on the same connection.
>  > #
>  > KeepAliveTimeout 15
>  >
>  > #
>  > # Server-pool size regulation.  Rather than making you guess how many
>  > # server processes you need, Apache dynamically adapts to the load it
>  > # sees --- that is, it tries to maintain enough server processes to
>  > # handle the current load, plus a few spare servers to handle transient
>  > # load spikes (e.g., multiple simultaneous requests from a single
>  > # Netscape browser).
>  > #
>  > # It does this by periodically checking how many servers are waiting
>  > # for a request.  If there are fewer than MinSpareServers, it creates
>  > # a new spare.  If there are more than MaxSpareServers, some of the
>  > # spares die off.  The default values are probably OK for most sites.
>  > #
>  > MinSpareServers 4
>  > MaxSpareServers 10
>  >
>  > #
>  > # Number of servers to start initially --- should be a reasonable 
> ballpark
>  > # figure.
>  > #
>  > StartServers 4
>  >
>  > #
>  > # Limit on total number of servers running, i.e., limit on the number
>  > # of clients who can simultaneously connect --- if this limit is ever
>  > # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
>  > # It is intended mainly as a brake to keep a runaway server from taking
>  > # the system with it as it spirals down...
>  > #
>  > MaxClients 150
>  >
>  > #
>  > # MaxRequestsPerChild: the number of requests each child process is
>  > # allowed to process before the child dies.  The child will exit so
>  > # as to avoid problems after prolonged use when Apache (and maybe the
>  > # libraries it uses) leak memory or other resources.  On most 
> systems, this
>  > # isn't really needed, but a few (such as Solaris) do have notable leaks
>  > # in the libraries. For these platforms, set to something like 10000
>  > # or so; a setting of 0 means unlimited.
>  > #
>  > # NOTE: This value does not include keepalive requests after the initial
>  > #       request per connection. For example, if a child process handles
>  > #       an initial request and 10 subsequent "keptalive" requests, it
>  > #       would only count as 1 request towards this limit.
>  > #
>  > MaxRequestsPerChild 500
>  >
>  >
> 
> ------------------------------------------------------------------------
> 
>  > ### Main Configuration Section
>  > ### You really shouldn't change these settings unless you're a guru
>  > ###
>  > ServerType standalone
>  > ServerRoot /etc/httpd
>  > #ServerName localhost
>  > #LockFile /etc/httpd/httpd-perl.lock
>  > PidFile /var/run/httpd-perl.pid
>  > ScoreBoardFile /etc/httpd/httpd-perl.scoreboard
>  > ErrorLog logs/perl-error_log
>  > LogLevel warn
>  > ResourceConfig /dev/null
>  > AccessConfig /dev/null
>  > DocumentRoot /var/www/html
>  >
>  > ### Dynamic Shared Object (DSO) Support
>  > ###
>  > ###
>  > #LoadModule mmap_static_module modules/mod_mmap_static.so
>  > LoadModule env_module         modules/mod_env.so
>  > LoadModule config_log_module  modules/mod_log_config.so
>  > LoadModule agent_log_module   modules/mod_log_agent.so
>  > LoadModule referer_log_module modules/mod_log_referer.so
>  > #LoadModule mime_magic_module  modules/mod_mime_magic.so
>  > LoadModule mime_module        modules/mod_mime.so
>  > LoadModule negotiation_module modules/mod_negotiation.so
>  > LoadModule status_module      modules/mod_status.so
>  > LoadModule info_module        modules/mod_info.so
>  > LoadModule includes_module    modules/mod_include.so
>  > LoadModule autoindex_module   modules/mod_autoindex.so
>  > LoadModule dir_module         modules/mod_dir.so
>  > LoadModule cgi_module         modules/mod_cgi.so
>  > LoadModule asis_module        modules/mod_asis.so
>  > LoadModule imap_module        modules/mod_imap.so
>  > LoadModule action_module      modules/mod_actions.so
>  > #LoadModule speling_module     modules/mod_speling.so
>  > LoadModule userdir_module     modules/mod_userdir.so
>  > LoadModule proxy_module       modules/libproxy.so
>  > LoadModule alias_module       modules/mod_alias.so
>  > LoadModule rewrite_module     modules/mod_rewrite.so
>  > LoadModule access_module      modules/mod_access.so
>  > LoadModule auth_module        modules/mod_auth.so
>  > LoadModule anon_auth_module   modules/mod_auth_anon.so
>  > #LoadModule dbm_auth_module    modules/mod_auth_dbm.so
>  > #LoadModule db_auth_module     modules/mod_auth_db.so
>  > LoadModule digest_module      modules/mod_digest.so
>  > #LoadModule cern_meta_module   modules/mod_cern_meta.so
>  > LoadModule expires_module     modules/mod_expires.so
>  > LoadModule headers_module     modules/mod_headers.so
>  > LoadModule usertrack_module   modules/mod_usertrack.so
>  > #LoadModule example_module     modules/mod_example.so
>  > #LoadModule unique_id_module   modules/mod_unique_id.so
>  > LoadModule setenvif_module    modules/mod_setenvif.so
>  > <IfDefine HAVE_PHP4>
>  > LoadModule php4_module    extramodules/libphp4.so
>  > </IfDefine>
>  > LoadModule vhost_alias_module modules/mod_vhost_alias.so
>  >
>  > #  Reconstruction of the complete module list from all available modules
>  > #  (static and shared ones) to achieve correct module execution order.
>  > #  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
>  > ClearModuleList
>  > #AddModule mod_mmap_static.c
>  > AddModule mod_env.c
>  > AddModule mod_log_config.c
>  > AddModule mod_log_agent.c
>  > AddModule mod_log_referer.c
>  > #AddModule mod_mime_magic.c
>  > AddModule mod_mime.c
>  > AddModule mod_negotiation.c
>  > AddModule mod_status.c
>  > AddModule mod_info.c
>  > AddModule mod_include.c
>  > AddModule mod_autoindex.c
>  > AddModule mod_dir.c
>  > AddModule mod_cgi.c
>  > AddModule mod_asis.c
>  > AddModule mod_imap.c
>  > AddModule mod_actions.c
>  > #AddModule mod_speling.c
>  > AddModule mod_userdir.c
>  > AddModule mod_proxy.c
>  > AddModule mod_alias.c
>  > AddModule mod_rewrite.c
>  > AddModule mod_access.c
>  > AddModule mod_auth.c
>  > AddModule mod_auth_anon.c
>  > #AddModule mod_auth_dbm.c
>  > #AddModule mod_auth_db.c
>  > AddModule mod_digest.c
>  > #AddModule mod_cern_meta.c
>  > AddModule mod_expires.c
>  > AddModule mod_headers.c
>  > AddModule mod_usertrack.c
>  > #AddModule mod_example.c
>  > #AddModule mod_unique_id.c
>  > AddModule mod_so.c
>  > AddModule mod_setenvif.c
>  > AddModule mod_vhost_alias.c
>  > <IfDefine HAVE_PHP4>
>  > AddModule mod_php4.c
>  > </IfDefine>
>  > AddModule mod_perl.c
>  >
>  > ###
>  > ### Fix headers in case we're proxied
>  > ###
>  > <IfDefine PERLPROXIED>
>  >     PerlRequire conf/addon-modules/proxied_handlers.pl
>  >     PerlLogHandler Apache::Proxied::log_handler
>  > </IfDefine>
>  >
>  > ###
>  > ### Global Configuration
>  > ###
>  > # We now support multiple apache configurations on the same server. In
>  > # common.conf, we put all directives that are common to all 
> implementations
>  > # (httpd, httpd-perl, etc.)
>  > Include conf/commonhttpd.conf
>  >
>  >
>  > ###
>  > ### IP Address/Port and Proxied configuration section
>  > ###
>  > # The PERLPROXIED setting is set in /etc/rc.d/init.d/httpd if you
>  > # are using both apache and apache-mod_perl. The main apache sends perl
>  > # requests via ProxyPass to apache-mod_perl. It increases performance
>  > # since the perl interpreter is only used for perl and the standard 
> apache
>  > # does all the html and image files, with a smaller footprint.
>  > # If you install apache and apache-mod_perl, this is the default config.
>  > # If you don't want two web servers to use perl, uninstall apache, and
>  > # apache-mod_perl will not be proxied.
>  >
>  > #BindAddress *
>  > <IfDefine !PERLPROXIED>
>  >     Port 80
>  >     Listen 80
>  > </IfDefine>
>  > <IfDefine PERLPROXIED>
>  >     Port 8200
>  >     Listen 8200
>  > </IfDefine>
>  >
>  > ###
>  > ### Log configuration Section
>  > ###
>  > <IfDefine !PERLPROXIED>
>  >     #Single logfile with access, agent and referer information
>  >     #This is the default, if vlogs are not defined for the main server
>  >     CustomLog logs/perl-access_log combined env=!VLOG
>  >     #If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
>  >     CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG
>  > </IfDefine>
>  > <IfDefine PERLPROXIED>
>  >     #Referer Log, etc., are not useful since we're running behind a 
> proxy.
>  >     #The 'script' log will add %T, the time to serve the request 
> instead,
>  >     #so we can see what scripts take the most CPU.
>  >     CustomLog logs/perl-proxied_log script
>  > </IfDefine>
>  >
>  > ###
>  > ### Virtual Hosts
>  > ###
>  > # We include different templates for Virtual Hosting. Have a look in the
>  > # vhosts directory and modify to suit your needs.
>  > Include conf/vhosts/Vhosts.conf
>  > #Include conf/vhosts/DynamicVhosts.conf
>  > #Include conf/vhosts/VirtualHomePages.conf
>  >
>  >
>  > ###
>  > ### Performance settings Section
>  > ###
>  > #
>  > # Timeout: The number of seconds before receives and sends time out.
>  > #
>  > Timeout 300
>  >
>  > #
>  > # KeepAlive: Whether or not to allow persistent connections (more than
>  > # one request per connection). Set to "Off" to deactivate.
>  > #
>  > KeepAlive On
>  >
>  > #
>  > # MaxKeepAliveRequests: The maximum number of requests to allow
>  > # during a persistent connection. Set to 0 to allow an unlimited amount.
>  > # We recommend you leave this number high, for maximum performance.
>  > #
>  > MaxKeepAliveRequests 100
>  >
>  > #
>  > # KeepAliveTimeout: Number of seconds to wait for the next request 
> from the
>  > # same client on the same connection.
>  > #
>  > KeepAliveTimeout 15
>  >
>  > #
>  > # Server-pool size regulation.  Rather than making you guess how many
>  > # server processes you need, Apache dynamically adapts to the load it
>  > # sees --- that is, it tries to maintain enough server processes to
>  > # handle the current load, plus a few spare servers to handle transient
>  > # load spikes (e.g., multiple simultaneous requests from a single
>  > # Netscape browser).
>  > #
>  > # It does this by periodically checking how many servers are waiting
>  > # for a request.  If there are fewer than MinSpareServers, it creates
>  > # a new spare.  If there are more than MaxSpareServers, some of the
>  > # spares die off.  The default values are probably OK for most sites.
>  > #
>  > MinSpareServers 4
>  > MaxSpareServers 8
>  >
>  > #
>  > # Number of servers to start initially --- should be a reasonable 
> ballpark
>  > # figure.
>  > #
>  > StartServers 4
>  >
>  > #
>  > # Limit on total number of servers running, i.e., limit on the number
>  > # of clients who can simultaneously connect --- if this limit is ever
>  > # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
>  > # It is intended mainly as a brake to keep a runaway server from taking
>  > # the system with it as it spirals down...
>  > #
>  > MaxClients 50
>  >
>  > #
>  > # MaxRequestsPerChild: the number of requests each child process is
>  > # allowed to process before the child dies.  The child will exit so
>  > # as to avoid problems after prolonged use when Apache (and maybe the
>  > # libraries it uses) leak memory or other resources.  On most 
> systems, this
>  > # isn't really needed, but a few (such as Solaris) do have notable leaks
>  > # in the libraries. For these platforms, set to something like 10000
>  > # or so; a setting of 0 means unlimited.
>  > #
>  > # NOTE: This value does not include keepalive requests after the initial
>  > #       request per connection. For example, if a child process handles
>  > #       an initial request and 10 subsequent "keptalive" requests, it
>  > #       would only count as 1 request towards this limit.
>  > #
>  > MaxRequestsPerChild 500
>  >
>  > Include  conf/addon-modules/php.conf
>  >
> 
> ------------------------------------------------------------------------
> 
>  > ### Common server configuration
>  > #
>  > User apache
>  > Group apache
>  >
>  > #
>  > # ServerAdmin: Your address, where problems with the server should be
>  > # e-mailed.  This address appears on some server-generated pages, such
>  > # as error documents.
>  > #
>  > ServerAdmin root@localhost <mailto:root@localhost>
>  >
>  > # DocumentRoot: The directory out of which you will serve your
>  > # documents. By default, all requests are taken from this directory, but
>  > # symbolic links and aliases may be used to point to other locations.
>  > # DO NOT MODIFY THIS ONE, USE httpd.conf and httpd-perl.conf
>  > #DocumentRoot /var/www/html
>  >
>  >
>  > #
>  > # Each directory to which Apache has access, can be configured with 
> respect
>  > # to which services and features are allowed and/or disabled in that
>  > # directory (and its subdirectories).
>  > #
>  > # First, we configure the "default" to be a very restrictive set of
>  > # permissions. 
>  > #
>  > # Also, for security, we disable indexes globally
>  > #
>  > #<Directory />
>  > #    Options -Indexes FollowSymLinks
>  > #    AllowOverride None
>  > #</Directory>
>  >
>  > #Restricted set of options
>  > <Directory />
>  >   Options -All -Multiviews
>  >   AllowOverride None
>  >   Order deny,allow
>  >   Deny from all
>  > </Directory>
>  >
>  >
>  > #
>  > # Note that from this point forward you must specifically allow
>  > # particular features to be enabled - so if something's not working as
>  > # you might expect, make sure that you have specifically enabled it
>  > # below.
>  > #
>  >
>  >
>  > #
>  > # UserDir: The name of the directory which is appended onto a user's home
>  > # directory if a ~user request is received.
>  > #
>  > <IfModule mod_userdir.c>
>  >     UserDir public_html
>  > </IfModule>
>  >
>  >    
>  > #
>  > # DirectoryIndex: Name of the file or files to use as a pre-written HTML
>  > # directory index.  Separate multiple entries with spaces.
>  > #
>  > <IfModule mod_dir.c>
>  >     DirectoryIndex index.html index.php index.php3 index.shtml 
> index.cgi index.pl index.htm Default.htm default.htm
>  > </IfModule>
>  >
>  > #
>  > # AccessFileName: The name of the file to look for in each directory
>  > # for access control information.
>  > #
>  > AccessFileName .htaccess
>  >
>  > #
>  > # The following lines prevent .htaccess files from being viewed by
>  > # Web clients.  Since .htaccess files often contain authorization
>  > # information, access is disallowed for security reasons.  Comment
>  > # these lines out if you want Web visitors to see the contents of
>  > # .htaccess files.  If you change the AccessFileName directive above,
>  > # be sure to make the corresponding changes here.
>  > #
>  > # Also, folks tend to use names such as .htpasswd for password
>  > # files, so this will protect those as well.
>  > #
>  > <Files ~ "^\.ht">
>  >     Order allow,deny
>  >     Deny from all
>  > </Files>
>  >
>  > #
>  > # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" 
> with each
>  > # document that was negotiated on the basis of content. This asks proxy
>  > # servers not to cache the document. Uncommenting the following line 
> disables
>  > # this behavior, and proxies will be allowed to cache the documents.
>  > #
>  > #CacheNegotiatedDocs
>  >
>  > #
>  > # UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
>  > # Apache needs to construct a self-referencing URL (a URL that refers 
> back
>  > # to the server the response is coming from) it will use ServerName and
>  > # Port to form a "canonical" name.  With this setting off, Apache will
>  > # use the hostname:port that the client supplied, when possible.  This
>  > # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
>  > #
>  > UseCanonicalName On
>  >
>  > #
>  > # TypesConfig describes where the mime.types file (or equivalent) is
>  > # to be found.
>  > #
>  > <IfModule mod_mime.c>
>  >     TypesConfig conf/apache-mime.types
>  > </IfModule>
>  >
>  > #
>  > # DefaultType is the default MIME type the server will use for a document
>  > # if it cannot otherwise determine one, such as from filename extensions.
>  > # If your server contains mostly text or HTML documents, "text/plain" is
>  > # a good value.  If most of your content is binary, such as applications
>  > # or images, you may want to use "application/octet-stream" instead to
>  > # keep browsers from trying to display binary files as though they are
>  > # text.
>  > #
>  > DefaultType text/plain
>  >
>  > #
>  > # The mod_mime_magic module allows the server to use various hints 
> from the
>  > # contents of the file itself to determine its type.  The MIMEMagicFile
>  > # directive tells the module where the hint definitions are located.
>  > # mod_mime_magic is not part of the default server (you have to add
>  > # it yourself with a LoadModule [see the DSO paragraph in the 'Global
>  > # Environment' section], or recompile the server and include 
> mod_mime_magic
>  > # as part of the configuration), so it's enclosed in an <IfModule> 
> container.
>  > # This means that the MIMEMagicFile directive will only be processed 
> if the
>  > # module is part of the server.
>  > #
>  > <IfModule mod_mime_magic.c>
>  >     MIMEMagicFile conf/magic
>  > </IfModule>
>  >
>  > #
>  > # HostnameLookups: Log the names of clients or just their IP addresses
>  > # e.g., www.apache.org <http://www.apache.org> (on) or 204.62.129.132 
> (off).
>  > # The default is off because it'd be overall better for the net if people
>  > # had to knowingly turn this feature on, since enabling it means that
>  > # each client request will result in AT LEAST one lookup request to the
>  > # nameserver.
>  > #
>  > HostnameLookups Off
>  >
>  > # The following directives define some format nicknames for use with
>  > # a CustomLog directive (see below).
>  > #
>  > LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" 
> \"%{User-Agent}i\"" combined
>  > LogFormat "%h %l %u %t \"%r\" %>s %b" common
>  > LogFormat "%{Referer}i -> %U" referer
>  > LogFormat "%{User-agent}i" agent
>  > LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
>  > LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" 
> \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost
>  >
>  > #
>  > # The location and format of the access logfile (Common Logfile Format).
>  > #CustomLog logs/access_log common
>  >
>  > #
>  > # If you would like to have agent and referer logfiles, uncomment the
>  > # following directives.
>  > #
>  > #CustomLog logs/referer_log referer
>  > #CustomLog logs/agent_log agent
>  >
>  > #
>  > # If you prefer a single logfile with access, agent, and referer 
> information
>  > # (Combined Logfile Format) you can use the following directive.
>  > #
>  > #CustomLog logs/access_log combined
>  >
>  > #
>  > # Optionally add a line containing the server version and virtual host
>  > # name to server-generated pages (error documents, FTP directory 
> listings,
>  > # mod_status and mod_info output etc., but not CGI generated documents).
>  > # Set to "EMail" to also include a mailto: link to the ServerAdmin.
>  > # Set to one of:  On | Off | EMail
>  > #
>  > ServerSignature On
>  >
>  > #
>  > # Aliases: Add here as many aliases as you need (with no limit). The 
> format is
>  > # Alias fakename realname
>  > #
>  > <IfModule mod_alias.c>
>  >
>  >     #
>  >     # Note that if you include a trailing / on fakename then the 
> server will
>  >     # require it to be present in the URL.  So "/icons" isn't aliased 
> in this
>  >     # example, only "/icons/"..
>  >     #
>  >     Alias /icons/ /var/www/icons/
>  >     Alias /doc /usr/share/doc
>  >
>  >
>  >     #
>  >     # ScriptAlias: This controls which directories contain server 
> scripts.
>  >     # ScriptAliases are essentially the same as Aliases, except that
>  >     # documents in the realname directory are treated as applications and
>  >     # run by the server when requested rather than as documents sent 
> to the client.
>  >     # The same rules about trailing "/" apply to ScriptAlias 
> directives as to
>  >     # Alias.
>  >     #
>  >     ScriptAlias /cgi-bin/ /var/www/cgi-bin/
>  >     ScriptAlias /protected-cgi-bin/ /var/www/protected-cgi-bin/
>  >
>  >     <IfModule mod_perl.c>
>  > #Provide two aliases to the same cgi-bin directory,
>  > #to see the effects of the 2 different mod_perl modes
>  > #for Apache::Registry Mode
>  > Alias /perl/ /var/www/perl/
>  > #for Apache::Perlrun Mode
>  > Alias /cgi-perl/ /var/www/perl/
>  >     </IfModule>
>  >
>  >
>  > </IfModule>
>  > # End of aliases.
>  >
>  > #
>  > # Redirect allows you to tell clients about documents which used to 
> exist in
>  > # your server's namespace, but do not anymore. This allows you to 
> tell the
>  > # clients where to look for the relocated document.
>  > # Format: Redirect old-URI new-URL
>  > #
>  >
>  > #
>  > # Directives controlling the display of server-generated directory 
> listings.
>  > #
>  > <IfModule mod_autoindex.c>
>  >
>  >     #
>  >     # FancyIndexing is whether you want fancy directory indexing or 
> standard
>  >     #
>  >     IndexOptions FancyIndexing
>  >
>  >     #
>  >     # AddIcon* directives tell the server which icon to show for 
> different
>  >     # files or filename extensions.  These are only displayed for
>  >     # FancyIndexed directories.
>  >     #
>  >     AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>  >
>  >     AddIconByType (TXT,/icons/text.gif) text/*
>  >     AddIconByType (IMG,/icons/image2.gif) image/*
>  >     AddIconByType (SND,/icons/sound2.gif) audio/*
>  >     AddIconByType (VID,/icons/movie.gif) video/*
>  >
>  >     AddIcon /icons/binary.gif .bin .exe
>  >     AddIcon /icons/binhex.gif .hqx
>  >     AddIcon /icons/tar.gif .tar
>  >     AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
>  >     AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip .bz2
>  >     AddIcon /icons/a.gif .ps .ai .eps
>  >     AddIcon /icons/layout.gif .html .shtml .htm .pdf
>  >     AddIcon /icons/text.gif .txt
>  >     AddIcon /icons/c.gif .c
>  >     AddIcon /icons/p.gif .pl .py .php .php3
>  >     AddIcon /icons/f.gif .for
>  >     AddIcon /icons/dvi.gif .dvi
>  >     AddIcon /icons/uuencoded.gif .uu
>  >     AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
>  >     AddIcon /icons/tex.gif .tex
>  >     AddIcon /icons/bomb.gif core
>  >
>  >     AddIcon /icons/back.gif ..
>  >     AddIcon /icons/hand.right.gif README
>  >     AddIcon /icons/folder.gif ^^DIRECTORY^^
>  >     AddIcon /icons/blank.gif ^^BLANKICON^^
>  >
>  >     #
>  >     # DefaultIcon is which icon to show for files which do not have 
> an icon
>  >     # explicitly set.
>  >     #
>  >     DefaultIcon /icons/unknown.gif
>  >
>  >     #
>  >     # AddDescription allows you to place a short description after a 
> file in
>  >     # server-generated indexes.  These are only displayed for 
> FancyIndexed
>  >     # directories.
>  >     # Format: AddDescription "description" filename
>  >     #
>  >     #AddDescription "GZIP compressed document" .gz
>  >     #AddDescription "tar archive" .tar
>  >     #AddDescription "GZIP compressed tar archive" .tgz
>  >
>  >     #
>  >     # ReadmeName is the name of the README file the server will look 
> for by
>  >     # default, and append to directory listings.
>  >     #
>  >     # HeaderName is the name of a file which should be prepended to
>  >     # directory indexes.
>  >     #
>  >     # If MultiViews are amongst the Options in effect, the server will
>  >     # first look for name.html and include it if found.  If name.html
>  >     # doesn't exist, the server will then look for name.txt and include
>  >     # it as plaintext if found.
>  >     #
>  >     ReadmeName README
>  >     HeaderName HEADER
>  >
>  >     #
>  >     # IndexIgnore is a set of filenames which directory indexing 
> should ignore
>  >     # and not include in the listing.  Shell-style wildcarding is 
> permitted.
>  >     #
>  >     IndexIgnore .??* *~ *# HEADER* RCS CVS *,v *,t
>  >
>  > </IfModule>
>  > # End of indexing directives.
>  >
>  > #
>  > # Document types.
>  > #
>  > <IfModule mod_mime.c>
>  >
>  >     #
>  >     # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) 
> uncompress
>  >     # information on the fly. Note: Not all browsers support this.
>  >     # Despite the name similarity, the following Add* directives have 
> nothing
>  >     # to do with the FancyIndexing customization directives above.
>  >     #
>  >     AddEncoding x-compress Z
>  >     AddEncoding x-gzip gz tgz
>  >
>  >     #
>  >     # AddLanguage allows you to specify the language of a document. 
> You can
>  >     # then use content negotiation to give a browser a file in a language
>  >     # it can understand. 
>  >     #
>  >     # Note 1: The suffix does not have to be the same as the language
>  >     # keyword --- those with documents in Polish (whose net-standard
>  >     # language code is pl) may wish to use "AddLanguage pl .po" to
>  >     # avoid the ambiguity with the common suffix for perl scripts.
>  >     #
>  >     # Note 2: The example entries below illustrate that in quite
>  >     # some cases the two character 'Language' abbreviation is not
>  >     # identical to the two character 'Country' code for its country,
>  >     # E.g. 'Danmark/dk' versus 'Danish/da'.
>  >     #
>  >     # Note 3: In the case of 'ltz' we violate the RFC by using a 
> three char
>  >     # specifier. But there is 'work in progress' to fix this and get
>  >     # the reference data for rfc1766 cleaned up.
>  >     #
>  >     # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
>  >     # French (fr) - German (de) - Greek-Modern (el)
>  >     # Italian (it) - Korean (kr) - Norwegian (no)
>  >     # Portugese (pt) - Luxembourgeois* (ltz)
>  >     # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
>  >     # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
>  >     # Russian (ru)
>  >     #
>  >     AddLanguage da .dk
>  >     AddLanguage nl .nl
>  >     AddLanguage en .en
>  >     AddLanguage et .ee
>  >     AddLanguage fr .fr
>  >     AddLanguage de .de
>  >     AddLanguage el .el
>  >     AddLanguage he .he
>  >     AddCharset ISO-8859-8 .iso8859-8
>  >     AddLanguage it .it
>  >     AddLanguage ja .ja
>  >     AddCharset ISO-2022-JP .jis
>  >     AddLanguage kr .kr
>  >     AddCharset ISO-2022-KR .iso-kr
>  >     AddLanguage no .no
>  >     AddLanguage pl .po
>  >     AddCharset ISO-8859-2 .iso-pl
>  >     AddLanguage pt .pt
>  >     AddLanguage pt-br .pt-br
>  >     AddLanguage ltz .lu
>  >     AddLanguage ca .ca
>  >     AddLanguage es .es
>  >     AddLanguage sv .se
>  >     AddLanguage cz .cz
>  >     AddLanguage ru .ru
>  >     AddLanguage zh-tw .tw
>  >     AddLanguage tw .tw
>  >     AddCharset Big5         .Big5    .big5
>  >     AddCharset WINDOWS-1251 .cp-1251
>  >     AddCharset CP866        .cp866
>  >     AddCharset ISO-8859-5   .iso-ru
>  >     AddCharset KOI8-R       .koi8-r
>  >     AddCharset UCS-2        .ucs2
>  >     AddCharset UCS-4        .ucs4
>  >     AddCharset UTF-8        .utf8
>  >
>  >     # LanguagePriority allows you to give precedence to some languages
>  >     # in case of a tie during content negotiation.
>  >     #
>  >     # Just list the languages in decreasing order of preference. We have
>  >     # more or less alphabetized them here. You probably want to 
> change this.
>  >     #
>  >     <IfModule mod_negotiation.c>
>  >         LanguagePriority en fr de es it da nl et el ja kr no pl pt 
> pt-br ru ltz ca sv tw
>  >     </IfModule>
>  >
>  >     #
>  >     # AddType allows you to tweak mime.types without actually editing 
> it, or to
>  >     # make certain files to be certain types.
>  >     #
>  >     # For example, the PHP 3.x module (not part of the Apache 
> distribution - see
>  >     # http://www.php.net) will typically use:
>  >     #
>  >     #AddType application/x-httpd-php3 .php3
>  >     #AddType application/x-httpd-php3-source .phps
>  >     #
>  >     # And for PHP 4.x, use:
>  >     #
>  >     #AddType application/x-httpd-php .php
>  >     #AddType application/x-httpd-php-source .phps
>  >
>  >     AddType application/x-tar .tgz
>  >
>  >     #
>  >     # AddHandler allows you to map certain file extensions to "handlers",
>  >     # actions unrelated to filetype. These can be either built into 
> the server
>  >     # or added with the Action command (see below)
>  >     #
>  >     # If you want to use server side includes, or CGI outside
>  >     # ScriptAliased directories, uncomment the following lines.
>  >     #
>  >     # To use CGI scripts:
>  >     #
>  >     AddHandler cgi-script .cgi
>  >
>  >     #
>  >     # To use server-parsed HTML files
>  >     #
>  >     AddType text/html .shtml
>  >     AddHandler server-parsed .shtml
>  >
>  >     #
>  >     # Uncomment the following line to enable Apache's send-asis HTTP file
>  >     # feature
>  >     #
>  >     #AddHandler send-as-is asis
>  >
>  >     #
>  >     # If you wish to use server-parsed imagemap files, use
>  >     #
>  >     AddHandler imap-file map
>  >
>  >     #
>  >     # To enable type maps, you might want to use
>  >     #
>  >     #AddHandler type-map var
>  >
>  > </IfModule>
>  > # End of document types.
>  >
>  > #
>  > # Action lets you define media types that will execute a script whenever
>  > # a matching file is called. This eliminates the need for repeated URL
>  > # pathnames for oft-used CGI file processors.
>  > # Format: Action media/type /cgi-script/location
>  > # Format: Action handler-name /cgi-script/location
>  > #
>  >
>  > #
>  > # MetaDir: specifies the name of the directory in which Apache can find
>  > # meta information files. These files contain additional HTTP headers
>  > # to include when sending the document
>  > #
>  > #MetaDir .web
>  >
>  > #
>  > # MetaSuffix: specifies the file name suffix for the file containing the
>  > # meta information.
>  > #
>  > #MetaSuffix .meta
>  >
>  > #
>  > # Customizable error response (Apache style)
>  > #  these come in three flavors
>  > #
>  > #    1) plain text
>  > #ErrorDocument 500 "The server made a boo boo.
>  > #  n.b.  the single leading (") marks it as text, it does not get output
>  > #
>  > #    2) local redirects
>  > #ErrorDocument 404 /missing.html
>  > #  to redirect to local URL /missing.html
>  > #ErrorDocument 404 /cgi-bin/missing_handler.pl
>  > #  N.B.: You can redirect to a script or a document using 
> server-side-includes.
>  > #
>  > #    3) external redirects
>  > #ErrorDocument 402 http://some.other_server.com/subscription_info.html
>  > #  N.B.: Many of the environment variables associated with the original
>  > #  request will *not* be available to such a script.
>  >
>  > <Location /manual>
>  > Options Multiviews
>  > ErrorDocument 404 "The document you requested has not been installed 
> on your system. Please install the apache-manual package.
>  > </Location>
>  >
>  >
>  > #
>  > # Customize behaviour based on the browser
>  > #
>  > <IfModule mod_setenvif.c>
>  >
>  >     #
>  >     # The following directives modify normal HTTP response behavior.
>  >     # The first directive disables keepalive for Netscape 2.x and 
> browsers that
>  >     # spoof it. There are known problems with these browser 
> implementations.
>  >     # The second directive is for Microsoft Internet Explorer 4.0b2
>  >     # which has a broken HTTP/1.1 implementation and does not properly
>  >     # support keepalive when it is used on 301 or 302 (redirect) 
> responses.
>  >     #
>  >     BrowserMatch "Mozilla/2" nokeepalive
>  >     BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 
> force-response-1.0
>  >
>  >     #
>  >     # The following directive disables HTTP/1.1 responses to browsers 
> which
>  >     # are in violation of the HTTP/1.0 spec by not being able to grok a
>  >     # basic 1.1 response.
>  >     #
>  >     BrowserMatch "RealPlayer 4\.0" force-response-1.0
>  >     BrowserMatch "Java/1\.0" force-response-1.0
>  >     BrowserMatch "JDK/1\.0" force-response-1.0
>  >
>  > </IfModule>
>  > # End of browser customization directives
>  >
>  > #
>  > # Allow server status reports, with the URL of 
> http://servername/server-status
>  > # Change the ".your_domain.com" to match your domain to enable.
>  > #
>  > <IfModule mod_status.c>
>  >     <Location /server-status>
>  >         SetHandler server-status
>  >         Order deny,allow
>  >         Deny from all
>  >         allow from 127.0.0.1
>  >         #Allow from .your_domain.com
>  >     </Location>
>  > #
>  > # ExtendedStatus controls whether Apache will generate "full" status
>  > # information (ExtendedStatus On) or just basic information 
> (ExtendedStatus
>  > # Off) when the "server-status" handler is called. The default is Off.
>  > #
>  > #ExtendedStatus On
>  > </IfModule>
>  >
>  > #
>  > # Allow remote server configuration reports, with the URL of
>  > # http://servername/server-info (requires that mod_info.c be loaded).
>  > # Change the ".your_domain.com" to match your domain to enable.
>  > #
>  > <IfModule mod_info.c>
>  >     <Location /server-info>
>  > SetHandler server-info
>  > Order deny,allow
>  > Deny from all
>  > Allow from .your_domain.com
>  >     </Location>
>  > </IfModule>
>  >
>  > <IfModule mod_perl.c>
>  >     <Location /perl-status>
>  > SetHandler perl-script
>  > PerlHandler Apache::Status
>  > Order deny,allow
>  > Deny from all
>  > Allow from 127.0.0.1
>  >     </Location>
>  > </IfModule>
>  >
>  > #
>  > # There have been reports of people trying to abuse an old bug from 
> pre-1.1
>  > # days.  This bug involved a CGI script distributed as a part of Apache.
>  > # By uncommenting these lines you can redirect these attacks to a 
> logging
>  > # script on phf.apache.org.  Or, you can record them yourself, using 
> the script
>  > # support/phf_abuse_log.cgi.
>  > #
>  > #<Location /cgi-bin/phf*>
>  > #    Deny from all
>  > #    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
>  > #</Location>
>  >
>  > #
>  > # Proxy Server directives. Uncomment the following lines to
>  > # enable the proxy server:
>  > #
>  > #<IfModule mod_proxy.c>
>  > #    ProxyRequests On
>  >
>  > #    <Directory proxy:*>
>  > #        Order deny,allow
>  > #        Deny from all
>  > #        Allow from .your_domain.com
>  > #    </Directory>
>  >
>  >     #
>  >     # Enable/disable the handling of HTTP/1.1 "Via:" headers.
>  >     # ("Full" adds the server version; "Block" removes all outgoing 
> Via: headers)
>  >     # Set to one of: Off | On | Full | Block
>  >     #
>  > #    ProxyVia On
>  >
>  >     #
>  >     # To enable the cache as well, edit and uncomment the following 
> lines:
>  >     # (no cacheing without CacheRoot)
>  >     #
>  > #    CacheRoot /var/cache/httpd
>  > #    CacheSize 5
>  > #    CacheGcInterval 4
>  > #    CacheMaxExpire 24
>  > #    CacheLastModifiedFactor 0.1
>  > #    CacheDefaultExpire 1
>  > #    NoCache a_domain.com another_domain.edu joes.garage_sale.com
>  >
>  > #</IfModule>
>  > # End of proxy directives.
>  >
>  > <IfModule mod_dav.c>
>  > #    DavLockDB /var/lock/DAVLock
>  > </IfModule>
>  >
>  > <IfModule mod_include.c>
>  > #    XBitHack on
>  > </IfModule>
>  >
>  >
>  > #
>  > # This should be changed to whatever you set DocumentRoot to.
>  > #
>  > <Directory /var/www/html>
>  >
>  > #
>  > # This may also be "None", "All", or any combination of "Indexes",
>  > # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
>  > #
>  > # Note that "MultiViews" must be named *explicitly* --- "Options All"
>  > # doesn't give it to you.
>  > #
>  >     Options -Indexes FollowSymLinks MultiViews
>  >
>  > #
>  > # This controls which options the .htaccess files in directories can
>  > # override. Can also be "All", or any combination of "Options", 
> "FileInfo",
>  > # "AuthConfig", and "Limit"
>  > #
>  >     AllowOverride All
>  >
>  > #
>  > # Controls who can get stuff from this server.
>  > #
>  >     Order allow,deny
>  >     Allow from all
>  > </Directory>
>  >
>  > <Directory /var/www/perl>
>  >     AllowOverride All
>  >     Options -Indexes FollowSymLinks MultiViews ExecCGI
>  >     Order allow,deny
>  >     Allow from all
>  > </Directory>
>  >
>  > <Directory /var/www/cgi-bin>
>  >     AllowOverride All
>  >     Options ExecCGI
>  > </Directory>
>  >
>  > <Directory /var/www/protected-cgi-bin>
>  >     AllowOverride None
>  >     Options ExecCGI
>  >     Order deny,allow
>  >     Deny from all
>  >     Allow from 127.0.0.1
>  >     #allow from .your_domain.com
>  > </Directory>
>  >
>  > #
>  > # Control access to UserDir directories.  The following is an example
>  > # for a site where these directories are restricted to read-only.
>  > #
>  > #<Directory /home/*/public_html>
>  > #    AllowOverride FileInfo AuthConfig Limit
>  > #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
>  > #    <Limit GET POST OPTIONS PROPFIND>
>  > #        Order allow,deny
>  > #        Allow from all
>  > #    </Limit>
>  > #    <LimitExcept GET POST OPTIONS PROPFIND>
>  > #        Order deny,allow
>  > #        Deny from all
>  > #    </LimitExcept>
>  > #</Directory>
>  >
>  > # These settings are pretty flexible, and allow for Frontpage and XSSI
>  > <Directory /home/*/public_html>
>  >     AllowOverride All
>  >     Options MultiViews -Indexes Includes FollowSymLinks
>  >     Order allow,deny
>  >     Allow from all
>  > </Directory>
>  >
>  > <Directory /home/*/public_html/cgi-bin>
>  >      Options +ExecCGI -Includes -Indexes
>  >      SetHandler cgi-script
>  > </Directory>
>  >
>  >
>  > <IfModule mod_perl.c>
>  >     <Directory /home/*/public_html/perl>
>  > SetHandler perl-script
>  > PerlHandler Apache::PerlRun
>  > Options -Indexes ExecCGI
>  > PerlSendHeader On
>  >     </Directory>
>  > </IfModule>
>  >
>  > <Directory /var/www/icons>
>  >     Options -Indexes MultiViews
>  >     AllowOverride None
>  >     Order allow,deny
>  >     Allow from all
>  > </Directory>
>  >
>  > <Directory /usr/share/doc>
>  >     Options Indexes FollowSymLinks
>  >     Order deny,allow
>  >     Deny from all
>  >     Allow from 127.0.0.1
>  >     #allow from .your_domain.com
>  > </Directory>
>  >
>  > <Directory /var/www/html/addon-modules>
>  >     Options Indexes FollowSymLinks
>  > </Directory>
>  >
>  > <Location /index.shtml>
>  >     Options +Includes
>  > </Location>
>  >
>  > <IfModule mod_perl.c>
>  >     PerlModule Apache::Registry
>  >    
>  >     #set Apache::Registry Mode for /perl Alias
>  >     <Location /perl/*.pl>
>  > SetHandler perl-script
>  > PerlHandler Apache::Registry
>  > Options -Indexes ExecCGI
>  > PerlSendHeader On
>  >     </Location>
>  >
>  >     #set Apache::PerlRun Mode for /cgi-perl Alias
>  >     <Location /cgi-perl/*.pl>
>  > SetHandler perl-script
>  > PerlHandler Apache::PerlRun
>  > Options -Indexes ExecCGI
>  > PerlSendHeader On
>  >     </Location>
>  > </IfModule>
>  >
>  >
> 
> ------------------------------------------------------------------------
> 
>  > # Magic data for mod_mime_magic Apache module (originally for file(1) 
> command)
>  > # The module is described in htdocs/manual/mod/mod_mime_magic.html
>  > #
>  > # The format is 4-5 columns:
>  > #    Column #1: byte number to begin checking from, ">" indicates 
> continuation
>  > #    Column #2: type of data to match
>  > #    Column #3: contents of data to match
>  > #    Column #4: MIME type of result
>  > #    Column #5: MIME encoding of result (optional)
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # Localstuff:  file(1) magic for locally observed files
>  > # Add any locally observed files here.
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # end local stuff
>  > 
> #------------------------------------------------------------------------------
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # Java
>  >
>  > 0 short 0xcafe
>  > >2 short 0xbabe application/java
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # audio:  file(1) magic for sound formats
>  > #
>  > # from Jan Nicolai Langfeldt <janl@ifi.uio.no <mailto:janl@ifi.uio.no>>,
>  > #
>  >
>  > # Sun/NeXT audio data
>  > 0 string .snd
>  > >12 belong 1 audio/basic
>  > >12 belong 2 audio/basic
>  > >12 belong 3 audio/basic
>  > >12 belong 4 audio/basic
>  > >12 belong 5 audio/basic
>  > >12 belong 6 audio/basic
>  > >12 belong 7 audio/basic
>  >
>  > >12 belong 23 audio/x-adpcm
>  >
>  > # DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format
>  > # that uses little-endian encoding and has a different magic number
>  > # (0x0064732E in little-endian encoding).
>  > 0 lelong 0x0064732E
>  > >12 lelong 1 audio/x-dec-basic
>  > >12 lelong 2 audio/x-dec-basic
>  > >12 lelong 3 audio/x-dec-basic
>  > >12 lelong 4 audio/x-dec-basic
>  > >12 lelong 5 audio/x-dec-basic
>  > >12 lelong 6 audio/x-dec-basic
>  > >12 lelong 7 audio/x-dec-basic
>  > #                                       compressed (G.721 ADPCM)
>  > >12 lelong 23 audio/x-dec-adpcm
>  >
>  > # Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM"
>  > # AIFF audio data
>  > 8 string AIFF audio/x-aiff
>  > # AIFF-C audio data
>  > 8 string AIFC audio/x-aiff
>  > # IFF/8SVX audio data
>  > 8 string 8SVX audio/x-aiff
>  >
>  > # Creative Labs AUDIO stuff
>  > # Standard MIDI data
>  > 0 string MThd audio/unknown
>  > #>9 byte >0 (format %d)
>  > #>11 byte >1 using %d channels
>  > # Creative Music (CMF) data
>  > 0 string CTMF audio/unknown
>  > # SoundBlaster instrument data
>  > 0 string SBI audio/unknown
>  > # Creative Labs voice data
>  > 0 string Creative\ Voice\ File audio/unknown
>  > ## is this next line right?  it came this way...
>  > #>19 byte 0x1A
>  > #>23 byte >0 - version %d
>  > #>22 byte >0 \b.%d
>  >
>  > # [GRR 950115:  is this also Creative Labs?  Guessing that first line
>  > #  should be string instead of unknown-endian long...]
>  > #0 long 0x4e54524b MultiTrack sound data
>  > #0 string NTRK MultiTrack sound data
>  > #>4 long x - version %ld
>  >
>  > # Microsoft WAVE format (*.wav)
>  > # [GRR 950115:  probably all of the shorts and longs should be 
> leshort/lelong]
>  > # Microsoft RIFF
>  > 0 string RIFF audio/unknown
>  > # - WAVE format
>  > >8 string WAVE audio/x-wav
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # c-lang:  file(1) magic for C programs or various scripts
>  > #
>  >
>  > # XPM icons (Greg Roelofs, newt@uchicago.edu <mailto:newt@uchicago.edu>)
>  > # ideally should go into "images", but entries below would tag XPM as 
> C source
>  > 0 string /*\ XPM image/x-xbm 7bit
>  >
>  > # this first will upset you if you're a PL/1 shop... (are there any 
> left?)
>  > # in which case rm it; ascmagic will catch real C programs
>  > # C or REXX program text
>  > 0 string /* text/plain
>  > # C++ program text
>  > 0 string // text/plain
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # compress:  file(1) magic for pure-compression formats (no archives)
>  > #
>  > # compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, 
> whap, etc.
>  > #
>  > # Formats for various forms of compressed data
>  > # Formats for "compress" proper have been moved into "compress.c",
>  > # because it tries to uncompress it to figure out what's inside.
>  >
>  > # standard unix compress
>  > 0 string \037\235 application/octet-stream x-compress
>  >
>  > # gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver)
>  > 0       string          \037\213        application/octet-stream x-gzip
>  >
>  > # According to gzip.h, this is the correct byte order for packed data.
>  > 0 string \037\036 application/octet-stream
>  > #
>  > # This magic number is byte-order-independent.
>  > #
>  > 0 short 017437 application/octet-stream
>  >
>  > # XXX - why *two* entries for "compacted data", one of which is
>  > # byte-order independent, and one of which is byte-order dependent?
>  > #
>  > # compacted data
>  > 0 short 0x1fff application/octet-stream
>  > 0 string \377\037 application/octet-stream
>  > # huf output
>  > 0 short 0145405 application/octet-stream
>  >
>  > # Squeeze and Crunch...
>  > # These numbers were gleaned from the Unix versions of the programs to
>  > # handle these formats.  Note that I can only uncrunch, not crunch, and
>  > # I didn't have a crunched file handy, so the crunch number is untested.
>  > # Keith Waclena <keith@cerberus.uchicago.edu 
> <mailto:keith@cerberus.uchicago.edu>>
>  > #0 leshort 0x76FF squeezed data (CP/M, DOS)
>  > #0 leshort 0x76FE crunched data (CP/M, DOS)
>  >
>  > # Freeze
>  > #0 string \037\237 Frozen file 2.1
>  > #0 string \037\236 Frozen file 1.0 (or gzip 0.5)
>  >
>  > # lzh?
>  > #0 string \037\240 LZH compressed data
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # frame:  file(1) magic for FrameMaker files
>  > #
>  > # This stuff came on a FrameMaker demo tape, most of which is
>  > # copyright, but this file is "published" as witness the following:
>  > #
>  > 0 string \<MakerFile application/x-frame
>  > 0 string \<MIFFile application/x-frame
>  > 0 string \<MakerDictionary application/x-frame
>  > 0 string \<MakerScreenFon application/x-frame
>  > 0 string \<MML application/x-frame
>  > 0 string \<Book application/x-frame
>  > 0 string \<Maker application/x-frame
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # html:  file(1) magic for HTML (HyperText Markup Language) docs
>  > #
>  > # from Daniel Quinlan <quinlan@yggdrasil.com 
> <mailto:quinlan@yggdrasil.com>>
>  > # and Anna Shergold <anna@inext.co.uk <mailto:anna@inext.co.uk>>
>  > #
>  > 0 string \<!DOCTYPE\ HTML text/html
>  > 0 string \<!doctype\ html text/html
>  > 0 string \<HEAD text/html
>  > 0 string \<head text/html
>  > 0 string \<TITLE text/html
>  > 0 string \<title text/html
>  > 0       string          \<html          text/html
>  > 0       string          \<HTML          text/html
>  > 0 string \<!-- text/html
>  > 0 string \<h1 text/html
>  > 0 string \<H1 text/html
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # images:  file(1) magic for image formats (see also "c-lang" for XPM 
> bitmaps)
>  > #
>  > # originally from jef@helios.ee.lbl.gov 
> <mailto:jef@helios.ee.lbl.gov> (Jef Poskanzer),
>  > # additions by janl@ifi.uio.no <mailto:janl@ifi.uio.no> as well as 
> others. Jan also suggested
>  > # merging several one- and two-line files into here.
>  > #
>  > # XXX - byte order for GIF and TIFF fields?
>  > # [GRR:  TIFF allows both byte orders; GIF is probably little-endian]
>  > #
>  >
>  > # [GRR:  what the hell is this doing in here?]
>  > #0 string xbtoa btoa'd file
>  >
>  > # PBMPLUS
>  > # PBM file
>  > 0 string P1 image/x-portable-bitmap 7bit
>  > # PGM file
>  > 0 string P2 image/x-portable-greymap 7bit
>  > # PPM file
>  > 0 string P3 image/x-portable-pixmap 7bit
>  > # PBM "rawbits" file
>  > 0 string P4 image/x-portable-bitmap
>  > # PGM "rawbits" file
>  > 0 string P5 image/x-portable-greymap
>  > # PPM "rawbits" file
>  > 0 string P6 image/x-portable-pixmap
>  >
>  > # NIFF (Navy Interchange File Format, a modification of TIFF)
>  > # [GRR:  this *must* go before TIFF]
>  > 0 string IIN1 image/x-niff
>  >
>  > # TIFF and friends
>  > # TIFF file, big-endian
>  > 0 string MM image/tiff
>  > # TIFF file, little-endian
>  > 0 string II image/tiff
>  >
>  > # possible GIF replacements; none yet released!
>  > # (Greg Roelofs, newt@uchicago.edu <mailto:newt@uchicago.edu>)
>  > #
>  > # GRR 950115:  this was mine ("Zip GIF"):
>  > # ZIF image (GIF+deflate alpha)
>  > 0 string GIF94z image/unknown
>  > #
>  > # GRR 950115:  this is Jeremy Wohl's Free Graphics Format (better):
>  > # FGF image (GIF+deflate beta)
>  > 0 string FGF95a image/unknown
>  > #
>  > # GRR 950115:  this is Thomas Boutell's Portable Bitmap Format proposal
>  > # (best; not yet implemented):
>  > # PBF image (deflate compression)
>  > 0 string PBF image/unknown
>  >
>  > # GIF
>  > 0 string GIF image/gif
>  >
>  > # JPEG images
>  > 0 beshort 0xffd8 image/jpeg
>  >
>  > # PC bitmaps (OS/2, Windoze BMP files)  (Greg Roelofs, 
> newt@uchicago.edu <mailto:newt@uchicago.edu>)
>  > 0 string BM image/bmp
>  > #>14 byte 12 (OS/2 1.x format)
>  > #>14 byte 64 (OS/2 2.x format)
>  > #>14 byte 40 (Windows 3.x format)
>  > #0 string IC icon
>  > #0 string PI pointer
>  > #0 string CI color icon
>  > #0 string CP color pointer
>  > #0 string BA bitmap array
>  >
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # lisp:  file(1) magic for lisp programs
>  > #
>  > # various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com 
> <mailto:quinlan@yggdrasil.com>)
>  > 0 string ;; text/plain 8bit
>  > # Emacs 18 - this is always correct, but not very magical.
>  > 0 string \012( application/x-elc
>  > # Emacs 19
>  > 0 string ;ELC\023\000\000\000 application/x-elc
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # mail.news:  file(1) magic for mail and news
>  > #
>  > # There are tests to ascmagic.c to cope with mail and news.
>  > 0 string Relay-Version: message/rfc822 7bit
>  > 0 string #!\ rnews message/rfc822 7bit
>  > 0 string N#!\ rnews message/rfc822 7bit
>  > 0 string Forward\ to message/rfc822 7bit
>  > 0 string Pipe\ to message/rfc822 7bit
>  > 0 string Return-Path: message/rfc822 7bit
>  > 0 string Path: message/news 8bit
>  > 0 string Xref: message/news 8bit
>  > 0 string From: message/rfc822 7bit
>  > 0 string Article message/news 8bit
>  > 
> #------------------------------------------------------------------------------
>  > # msword: file(1) magic for MS Word files
>  > #
>  > # Contributor claims:
>  > # Reversed-engineered MS Word magic numbers
>  > #
>  >
>  > 0 string \376\067\0\043 application/msword
>  > 0 string \333\245-\0\0\0 application/msword
>  >
>  > # disable this one because it applies also to other
>  > # Office/OLE documents for which msword is not correct. See PR#2608.
>  > #0 string \320\317\021\340\241\261 application/msword
>  >
>  >
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # printer:  file(1) magic for printer-formatted files
>  > #
>  >
>  > # PostScript
>  > 0 string %! application/postscript
>  > 0 string \004%! application/postscript
>  >
>  > # Acrobat
>  > # (due to clamen@cs.cmu.edu <mailto:clamen@cs.cmu.edu>)
>  > 0 string %PDF- application/pdf
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # sc:  file(1) magic for "sc" spreadsheet
>  > #
>  > 38 string Spreadsheet application/x-sc
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # tex:  file(1) magic for TeX files
>  > #
>  > # XXX - needs byte-endian stuff (big-endian and little-endian DVI?)
>  > #
>  > # From <conklin@talisman.kaleida.com 
> <mailto:conklin@talisman.kaleida.com>>
>  >
>  > # Although we may know the offset of certain text fields in TeX DVI
>  > # and font files, we can't use them reliably because they are not
>  > # zero terminated. [but we do anyway, christos]
>  > 0 string \367\002 application/x-dvi
>  > #0 string \367\203 TeX generic font data
>  > #0 string \367\131 TeX packed font data
>  > #0 string \367\312 TeX virtual font data
>  > #0 string This\ is\ TeX, TeX transcript text
>  > #0 string This\ is\ METAFONT, METAFONT transcript text
>  >
>  > # There is no way to detect TeX Font Metric (*.tfm) files without
>  > # breaking them apart and reading the data.  The following patterns
>  > # match most *.tfm files generated by METAFONT or afm2tfm.
>  > #2 string \000\021 TeX font metric data
>  > #2 string \000\022 TeX font metric data
>  > #>34 string >\0 (%s)
>  >
>  > # Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com 
> <mailto:quinlan@yggdrasil.com>)
>  > #0 string \\input\ <file://\\input\> texinfo Texinfo source text
>  > #0 string This\ is\ Info\ file GNU Info text
>  >
>  > # correct TeX magic for Linux (and maybe more)
>  > # from Peter Tobias (tobias@server.et-inf.fho-emden.de 
> <mailto:tobias@server.et-inf.fho-emden.de>)
>  > #
>  > 0 leshort 0x02f7 application/x-dvi
>  >
>  > # RTF - Rich Text Format
>  > 0 string {\\rtf application/rtf
>  >
>  > 
> #------------------------------------------------------------------------------
>  > # animation:  file(1) magic for animation/movie formats
>  > #
>  > # animation formats, originally from vax@ccwf.cc.utexas.edu 
> <mailto:vax@ccwf.cc.utexas.edu> (VaX#n8)
>  > # MPEG file
>  > 0 string \000\000\001\263 video/mpeg
>  > #
>  > # The contributor claims:
>  > #   I couldn't find a real magic number for these, however, this
>  > #   -appears- to work.  Note that it might catch other files, too,
>  > #   so BE CAREFUL!
>  > #
>  > # Note that title and author appear in the two 20-byte chunks
>  > # at decimal offsets 2 and 22, respectively, but they are XOR'ed with
>  > # 255 (hex FF)! DL format SUCKS BIG ROCKS.
>  > #
>  > # DL file version 1 , medium format (160x100, 4 images/screen)
>  > 0 byte 1 video/unknown
>  > 0 byte 2 video/unknown
>  >
>  >
> 
> ------------------------------------------------------------------------
> 
>  > ---------------------------------------------------------------------
>  > The official User-To-User support forum of the Apache HTTP Server 
> Project.
>  > See <URL:http://httpd.apache.org/userslist.html 
> <http://httpd.apache.org/userslist.html>> for more info.
>  > To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org 
> <mailto:users-unsubscribe@httpd.apache.org>
>  >    "   from the digest: users-digest-unsubscribe@httpd.apache.org 
> <mailto:users-digest-unsubscribe@httpd.apache.org>
>  > For additional commands, e-mail: users-help@httpd.apache.org 
> <mailto:users-help@httpd.apache.org>



---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
   "   from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org


Mime
View raw message