httpd-users mailing list archives

Site index · List index
Message view « Date » · « Thread »
Top « Date » · « Thread »
From "Randy Wilcox" <Randy.Wil...@sas.com>
Subject RE: [users@httpd] Fw: WebTrends Help
Date Thu, 07 Nov 2002 19:46:39 GMT
I've had it compile successfully on SunOS, Linux and OSF1 without any problems. The last version
that I have compiled was cronolog-1.6.2. Can't remember which version of SunOS it was, but
it is a fairly generic, DMZ hardened system so it doesn't have very may custom lib's in it.

- Randy

-----Original Message-----
From: Stefano Ghisolfi [mailto:ghisu@edv.it] 
Sent: Thursday, November 07, 2002 10:07 AM
To: users@httpd.apache.org
Subject: Re: [users@httpd] Fw: WebTrends Help


Thank you very much Randy. Do you know if there are some compiling problems on the SUN? Best
regards Stefano


----- Original Message -----
From: "Randy Wilcox" <Randy.Wilcox@sas.com>
To: <users@httpd.apache.org>
Sent: Thursday, November 07, 2002 2:21 PM
Subject: RE: [users@httpd] Fw: WebTrends Help


> Check out Cronolog (free) from
http://www.ford-mason.co.uk/resources/cronolog/
>
> That will allow the server to automatically create log files with
formatted (date based) names.
>
> - Randy
>
> -----Original Message-----
> From: Stefano Ghisolfi [mailto:ghisu@edv.it]
> Sent: Thursday, November 07, 2002 3:33 AM
> To: APACHE
> Subject: [users@httpd] Fw: WebTrends Help
>
>
>  Thanks a lot.
>  But i don't understand if it's possible to create in my apache log
directory  different access_log files day by day.
>
>  For example:
>  apache_log_11062002
>  apache_log_11072002
>  apache_log_11082002
>  etc
>  etc
>  Best regards
>  Stefano
>
> >
> > ----- Original Message -----
> > From: "Ken Boyer" <kboyer@logicalimages.com>
> > To: "'Stefano Ghisolfi'" <ghisu@edv.it>
> > Sent: Wednesday, November 06, 2002 2:49 PM
> > Subject: WebTrends Help
> >
> >
> > > Hi,
> > >
> > > I'm writing to you directly since the Apache mail list is not the 
> > > appropriate forum for WebTrends assistance.
> > >
> > > These directions are specific to WebTrends version 7.
> > >
> > > To run reports for specific dates:
> > >
> > > Defining your own report range lets you tailor your reports to 
> > > meet your exact needs. You can have the reports cover as long or 
> > > as short a span as you wish, and save your settings as a 
> > > predefined report template for future use. To define a report 
> > > range, you must use macros, but you can enter the macros directly 
> > > or use the Report Range Assistant to aid you in constructing a 
> > > macro string that meets your needs. You can then test the report 
> > > range to see what times and dates the report range you constructed 
> > > will actually encompass. See Understanding Report Ranges for an 
> > > extensive background discussion of report ranges and macro usage.
> > >
> > > To define a report range:
> > >
> > > 1 Enter a name for your range in the Display Name text box 
> > > provided in the Define Report Range dialog box.
> > >
> > > Be sure to enter a unique and descriptive name. This name will 
> > > appear in the predefined reports list in the Main - Report Ranges 
> > > options panel and might also appear in the predefined reports list 
> > > in the Report Ranges tab in the New Report or the Edit Report 
> > > dialog box. A unique name makes your range easier to spot in these 
> > > lists, and a name that describes what sort of range the report 
> > > covers helps you to choose the correct range when you need it.
> > >
> > > 2 Select This will be available in the Report Wizard to have your 
> > > report range listed in the predefined reports menu in the Report 
> > > Ranges tab.
> > >
> > > The Report Ranges tab appears either in the New Report or the Edit 
> > > Report dialog box when you create or change a report template.
> > >
> > > 3 Enter the macros that you want to use to designate the start of 
> > > your report range. To learn how to enter macros for this purpose, 
> > > see Using Macros to Define a Report Range.
> > >
> > > 4 Enter the macros that designate the end of your report range. To 
> > > learn how to do so, see Using Macros to Define a Report Range.
> > >
> > > If you want the software to guide you as you enter your macros in 
> > > either provided text box, click Report Range Assistant. Using the 
> > > Report Range Assistant to Define Report Ranges describes how to 
> > > use this utility.
> > >
> > > 5 When you have entered your macros, click Test Report Range to 
> > > open the Test Resolution of Report Range dialog box and see the 
> > > actual length of time your macros will cover.
> > >
> > > This enables you to see whether you have set up the report range 
> > > you want without first having to actually process a log file and 
> > > produce a report. What you see will depend on what macro string 
> > > you entered:
> > >
> > > § If the macros you enter set your reference point at "now," the 
> > > Test Resolution of Report Range dialog box first tells you that it 
> > > will resolve that reference point to the current date and time for 
> > > the purposes of this test. It then lists the macro strings you 
> > > entered into the Define Report Range dialog box. Finally, it shows 
> > > you the date and time on which your report range will start and 
> > > end. Once you have verified that the macros you entered produce 
> > > the report range you intended, click Close to return to the Define 
> > > Report Range dialog box.
> > >
> > > Note To see this dialog box, you must enter "now" as your report 
> > > range either for the Report Range Start Macro or the Report Range 
> > > End Macro, or both. If you enter "start of log" or "end of log" in 
> > > either macro string, however, you will see the Test Resolution of 
> > > Report Range dialog box described below.
> > >
> > > § If your macros set your reference point at "start of log" or 
> > > "end of log," the Test Resolution of Report Range dialog box first 
> > > asks you to specify when the data in your log file begins and when 
> > > it ends. You might need to open and view your log file to obtain 
> > > this information.
> > >
> > > The software asks you this because it has not yet processed your 
> > > log file and needs specific values for the start and end of your 
> > > log file in order to calculate actual dates and times for your 
> > > report range. Initially, the start and end dates that appear in 
> > > the dialog box are the same and correspond to today's date and 
> > > time. Type new dates in mm/dd/yy format into the text boxes 
> > > provided, or click the arrows to display calendars, then choose 
> > > the correct dates from those displays. Next, enter new times -- 
> > > you can type the times directly into the provided text boxes, or 
> > > click the up and down arrows to scroll through time values.
> > >
> > > The dialog box then displays the macro strings you entered into 
> > > the Define Report Range dialog box. Click Resolve Report Range 
> > > Based On Supplied Date/Time to see the date and time on which your 
> > > report range will start and end. Once you have verified that the 
> > > macros you entered produce the report range you intended, click 
> > > Close to return to the Define Report Range dialog box.
> > >
> > > 6 Next, you can:
> > >
> > > § Click OK to save your settings and close the Define Report Range 
> > > dialog box.
> > >
> > > § Click Cancel to close the Define Report Range dialog box without 
> > > saving your settings.
> > >
> > >
> > >
> > >
> > >
> > > Ken Boyer
> > > Logical Images, Inc.
> > > 3445 Winton Place, Suite 212
> > > Rochester, New York 14623
> > > 585-273-8224
> > > 585-273-8227 (fax)
> > > kboyer@logicalimages.com
> > > www.logicalimages.com
> > >
> > >
> >
>
>
> ---------------------------------------------------------------------
> The official User-To-User support forum of the Apache HTTP Server 
> Project.
See <URL:http://httpd.apache.org/userslist.html> for more info. To unsubscribe, e-mail:
users-unsubscribe@httpd.apache.org
>    "   from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>
>
> ---------------------------------------------------------------------
> The official User-To-User support forum of the Apache HTTP Server 
> Project. See <URL:http://httpd.apache.org/userslist.html> for more 
> info. To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
>    "   from the digest: users-digest-unsubscribe@httpd.apache.org
> For additional commands, e-mail: users-help@httpd.apache.org
>


---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project. See <URL:http://httpd.apache.org/userslist.html>
for more info. To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
   "   from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org


---------------------------------------------------------------------
The official User-To-User support forum of the Apache HTTP Server Project.
See <URL:http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: users-unsubscribe@httpd.apache.org
   "   from the digest: users-digest-unsubscribe@httpd.apache.org
For additional commands, e-mail: users-help@httpd.apache.org


Mime
View raw message